DEMA Global Headquarters10020 Big Bend BoulevardSt. Louis, MO 63122Phone: (800) 325-3362Fax: (314) 965-8319www.demaeng.comemail: sales @demaeng.com

Viking LLC512 Industrial RoadNesquehoning, PA 18240Phone: (800) 441-1343Fax: (570) 645-3679www.viking-injector.comemail: sales@viking-injector.com

DEMA Europe LLCMast 25, 3891 KEZeewolde, NetherlandsPhone: 31-(0)-36-522-7006Fax: 31-(0)-36-522-7863www.demaeurope.comemail: sales@demaeurope.com

DEMA AustraliaUnit 8, 7-11 Parraweena RoadCaringbah N.S.W. 2229Sydney, AustraliaPhone: 61-2-9525-5177Fax: 61-2-9525-5033www.dema.com.auemail: sales@demaust.com

DEMA China Representative OfficeRoom 1317, SIPAI Plaza103 Cao Bao RoadShanghai, 200233 P.R. ChinaPhone: 86 21-5424 7729Fax: 86 21-6464 1721email: johnzhu@demachina.com.cn

DEMA Latin America Sistemas deDosegem LtdaRua Andre Ampere, 153 Cj. 67Edificio Terra BrasilisCEP 04562-080 Brooklin Sau Paulo BrazilPhone/Fax: (5511) 3853-8958Mobile: (5511) 8579-3477email: omarpuras@uol.com.br

DEMA Engineering Company • 10020 Big Bend Boulevard, St. Louis, MO 63122 • (314) 966-3533 • www.demaeng.com • sales@demaeng.com

D I S P E N S I N G S Y S T E M S C A T A L O G

Cata

log

2010

DIS

P

Dispensing Innovation

TABLE OF CONTENTS

1

2 Food Service Kitchen DispensersWall Mounted Pumps and Faucet Proportioners

3 Food Service Kitchen DispensersSingle and Dual Sink Dispensers, Faucet Adapter Kits and Drain and Odor Control Dispensing Systems

4 Warewash DispensersTitan Probe/Probeless Dispensing Systems

5 Warewash DispensersNitro and Nitro Express Probe/Probeless Dispensing Systems

6 Warewash DispensersOlympian Mini Pumps, DemaMaster Probe/Probeless Dispensers and Detergent and Rinse Bowls

7 Solid Product DispensersSolid Laundry Dispensers, Accessories, and Bowl Options

8 Warewash and Laundry Dispenser PartsTubing, Fittings, Probes, Motors and Miscellaneous

9 Warewash and Laundry Dispenser PartsPump Kits, Laundry Kits, Flush Manifolds and Flush Kits

10 Laundry Dispensing Systems844P Atlas and 846E LaundryMaster Laundry Dispensers

11 Laundry Dispensing SystemsProgramming and Formula Select Remotes and844 LaundryMaster Laundry Dispensers

12 Laundry and Housekeeping Dispensing SystemsTop Shot, 830 Series and Low Level Alarm Laundry Systems and 633 and 681 Blend Centers Housekeeping Dispensers

13 Blend Safe Housekeeping Dispensing SystemsStainless Steel and Plastic Enclosed, Locking Systems and Dispensers Only

14 Dilution at Hand Extreme Housekeeping Dispensing SystemsEnclosed, Locking Systems and Dispensers Only

15 Dilution at Hand Extreme Housekeeping Dispensing SystemsEnclosed, Locking Systems and Dispensers Only

16 Housekeeping Dispenser Parts17 Industrial Dispensing Systems

Float Valve Dispensers, High Flow Dispensers and Drum Mount Proportioners18 Spray and Foam Dispensing Systems

Rapid Fire Spray and Foam Dispensers19 Spray and Foam Dispensing Systems

Spray Station II, Select-O-Matic, Spray Guns, Foam Wands and Hoses20 Compressed Air Foam Dispensing Systems

Compressed Air Foamers, Foam Wands, FoamStation Dispensers21 Compressed Air Foam Dispensing Systems

900 Series Dispensers22 MixRite Proportioning Pumps

Water driven proportioning pumps23 MixRite Foamers and Mobile Cart Cleaning Systems

Wall and Cart Mounted Foaming MixRites and Mobile Cart Spray, Foam and Compressed Air Systems

24 Chemical Injectors and SprayClean Injectors

2

Designed to pump 1 or 2ounces (30 or 60 milliliters)of detergent, sanitizer, orother chemical into kitchensink, bottle, dry cleaningmachine, or any open container where chemical is mixed with water. Eachpush delivers 1 or 2 ounceswith the pump automaticallymaintaining its prime forfuture use.

Faucet Mounted Proportioners302 Series Hand PumpDEMA Faucet Proportioners attach to any standard faucetand dispense a chemical and water mixture into the sink byeither pushing a button or sliding a knob. Chemical dilution is determined by using metering tips on some units and ametering screw adjustment on others.

Models 151 and 153Use color coded metering tips to determine dilution ratioStandard tip kit is 100-15KUltra Lean tip kit is 100-15KU

Models 152 and 154Use metering screw adjustment to determine dilution ratio

Models 153 and 154 Includes a built in ASSE approved siphon breaker

Models 167 and 167T Uses a slide valve actuator to determine if a chemical solutionis dispensed or water only. Unit is available standard withmetering screw and metering tips.

• 1 or 2 ounce pumps available (30 or 60 milliliters)• Polypropylene body and polyethylene bellows

for chemical resistance• Epdm, silicone, or viton seals available on check valves• Chemical does not come in contact with spring• Mounts on any vertical or horizontal surface• Optional spout available (part number 30-81-1)

302-1E

302-2S-SP

MODEL No. FLOW CHECK VALVE SEAL

302-1E 1 ounce (30 ml) epdm302-1S 1 ounce silicone302-1V 1 ounce viton302-2E 2 ounce (60 ml) epdm302-2S 2 ounce silicone302-2V 2 ounce viton

Add suffix - SP at end of number for unit to include spoutExample: 302-1E-SP

EPDM seals recommended for detergent useSilicone seals recommended for chlorine useViton seals recommended for solvent use

Model 167

Model 153

Special adapters available for faucet proportioners

150-9-2 Irregular faucet adapter (uses rubber sleeve andworm clamp to attach on)

150-21 Inside Aerator Thread Adapter150-22 Outside Chicago Thread Adapter150-32 Inside Kohler Thread Adapter

FOOD SERVICE KITCHEN DISPENSERS

3Single and Dual Sink DispensersModel ProFill 651 Single Sink Dispenser dispenses one product into a kitchen sink with the turn of a ball valve.Available with Action Gap or air gap backflow protection and compression or garden hose connection.Model ProFill 652Dual Sink Dispenser dispenses two products into a kitchensink with the turn of a ball valve. Available with Action Gap or air gap backflow protection and garden hose connection.Also available with compression fittings with dual or single water inlet. Model Options: GAP after model number for Action Gap(651GAP) and AG for air gap. Both have ASSE 1055 approval. Check local plumbing regulations for proper backflow. Add -1M or -2M (651 or 652) for compression fitting connection.

Model 68-4 Faucet Adapter Kit Makes installing proportioning equipment over the sink neat and easy. The kit includesadapters for Chicago, Fisher, and T & Sfaucets. A pre-built manifold consisting of a tee, ball valve, and water hose allows user to control water flow to sink or dispenser.

Model 68-4-2Includes Fisher adapters only and manifold assemblyModel 68-4-3Includes Chicago adapters only and manifold assemblyModel 68-4-4Includes T & S adapters only and manifold assemblyModel 68-21 T & S Scrap hose sink adapter kit

PF652GAPPF651GAP

Faucet Adapter Kits

Drain and Odor Control Dispensing Systems

Automatically feeds chemicals into drains and grease traps tobreak up grease and detergent buildup and eliminate odors.Additional applications include odor control in dumpsters and trash chutes. Typical environments include food service,lodging, food processing, waste processing and water treatment.

Model 257C Drain ChiefOperates on 8 D-cell batteries or optional wall plug. Uses electronic timer for dosing activations and is capable of up to 8 feeds per 24 hours.

Model 2500 Squirt Operates on 12V plug-in transformer. Uses electronic timer for dosing activations and is capable of up to 8 feedsper 24 hours. This small compact unit uses the Olympianpump platform. International versions available with plug-inadapters.

Model 259CT Pro Scentnal The Pro Scentnal is the same unit as the 257C Drain Chief but utilizes a brass spray nozzle for spray application intodumpsters, trash chutes and other areas for odor control.Uses standards 115 VAC wall plug and manual timer capableof 2 feeds per hour and 28 feeds per 24 hours. Can be usedwithout spray nozzle as a traditional drain / dosing system.

2500 Squirt257C Drain Chief

591

Model 591 Water Diverter Valve screwson end of faucet and diverts water todispenser by pulling a plunger whilewater is on.

259CT Pro Scentnal

FOOD SERVICE KITCHEN DISPENSERS

68-4

WAREWASH DISPENSERS

Probe and Probeless Operation with Auto-Switchover

DEMA’s TITAN range of warewash dispensers was developedto reduce the number of service calls and create a more profitable installation at all types of warewash accounts. The unit can be set up in concentration, probeless or autoswitchover mode depending on the installation requirements.If set up in auto switchover mode, the unit will automaticallyswitch over to probeless mode if any of the following conditions are met:

• Shorted probe• Open probe• Limed up probe• Dispenser does not feed for a period of time• Dispenser over feeds for period of time

Once the condition is resolved, the unit will switch itself back to concentration mode. This feature greatly reduces the number of service calls and allow better use of serviceand sales groups’ time. The TITAN is truly a first of its kind; a dispenser that will pay for itself.

All models come complete with probe, detergent injectionfitting, rinse injection fitting, mounting plate, and poly tubing

Pumps

• Quick change squeeze tube with no tools required • Quick connect fittings• Spring loaded 2-roller design for extended tubing life• 16 ounces per minute with 60 RPM gear motor (detergent)

Electronics and Programming Specifications

• Programmable with keypad for quick setup• 100-265 VAC 50/60 Hz with auto-switching power supply• Pre-wired for quicker installation• Isolated trigger board for 24VAC to 480VAC• Probeless alarms for liquid or dry products• Diagnostic mode• Feed rate adjustment adapts to size of machine• Non-volatile memory allows pre-programming

prior to installation• Built in rack counter• Multilingual display - English, Spanish, French and Portuguese• Programmable company information and service

message to personalize dispenser

4

T-812-LLT-813-DLL

TITAN Warewash Dispensers Features and Benefits continued

No Tool Quick changepump cover

MODEL NO. NUMBER OF PUMP OR CHEMICALS SOLENOID VALVE

T-811-L 1 PumpT-811-D 1 Solenoid ValveT-812-LL 2 Pump/PumpT-812-DL 2 Solenoid/PumpT-813-LLL 3 Pump/Pump/PumpT-813-DLL 3 Solenoid/Pump/Pump

Enclosure

• Modular design allows for easy conversion to 3 product system

• ABS material for durability• Stainless steel mounting plate for easy wall removal• Digital display

Features and Benefits

TITAN and NITRO Accessories:Model 82-23-1 Magnetic Field Sensor (MFS)

Patent-pending technology to reduce installation time and create a safer environment for service personnel. The MFS is a wireless pump activator that eliminates the need for a directelectrical connection to activate the the solenoid or pump.

• Eliminate need for direct electrical connection to customer’s equipment

• Provide electrical isolation from control circuits• Eliminate need to get into control box on warewash machine

Model 82-28-1 Inductive Probe

Higher technology probe designed so the coils never see chemical or hard water in the warewash machine, thus making it a non-service item.

• Significant reduction in probe maintenance• Temperature compensation built into probe for more

accurate readings• Helps maintain more accurate detergent concentration

81-118-18 Sanitizer/Rinse module

Nitro Express is the compact multi-feature dispenser with traditional analog programming. It has the versatility to beused with or without a probe from the same unit and hasmany of the same features as Nitro.

NITRO Digital Warewash DispensersThe Nitro warewash dispenser line bridges the gap betweencompact basic dispensers and feature packed units too largefor small kitchens. Nitro has the versatility to be used with orwithout a probe from the same unit and delivers premium features in a compact size with reduced installation and maintenance requirements. FEATURES and BENEFITS:Enclosure• Compact design fits almost anywhere• Splash resistant ABS material for reliability and durability• ABS mounting plate for easy wall mounting and removal• Digital displayPumps• Proven Olympian pump platform• Quick change pump cover for tool-less tube changing• Entire pump easily removed by 1 screw for easy changing • Detergent pump rate 6 oz per minute, rinse & sanitizer 1.35 oz.• Separate pump module for sanitizerElectronics and Programming Specifications and general features• Pre-wired power supply to reduce installation time• 100-265 VAC 50/60 Hz with auto-switching power supply• Isolated trigger board for 24VAC to 480VAC• Password protected digital programming with keypad• Built-in rack counter• Multilingual display – English Spanish, French and

Portuguese• Programmable company information and service message• Can use optional magnetic field reader for faster and safer

installation and inductive probe for hard water environments

NITRO EXPRESS Analog Warewash Dispensers

MODEL No. NUMBER OF PUMP OR CHEMICALS SOLENOID VALVE

N-LL-TA 2 Pump/PumpN-DL-TA 2 Solenoid/PumpN-LLL-TA 3 Pump/Pump/PumpN-DLL-TA 3 Solenoid/Pump/PumpO-ADC 1 Pump for Sanitizer

MODEL No. NUMBER OF PUMP OR CHEMICALS SOLENOID

NE-LL-A 2 Pump/PumpNE-DL-A 2 Solenoid/Pump

* NE-LLL-A-NP 2 Pump/Pump* NE-DLL-A-NP 2 Solenoid/Pump

NE-LLL-A 3 Pump/Pump/PumpNE-DLL-A 3 Solenoid/Pump/PumpO-ADC 1 Pump for Sanitizer

WAREWASH DISPENSERS5

* 2 product systems shipped with 3 product board. Can accept a sanitizer pump addition

NE-DL-A

FEATURES and BENEFITS:Enclosure• Compact design fits almost anywhere• Splash resistant ABS material for durability• ABS mounting plate for easy wall mounting and removal• Low level alarm and active / signal LED and priming

switches on the front of the unitPumps• Proven Olympian pump platform• Quick change pump cover for tool-less tube changing• Entire pump easily removed by 1 screw for easy change

out if necessary• Detergent pump rate 6 oz per minute, rinse & sanitizer 1.35 oz.• Separate pump module for sanitizerElectronics and Programming Specifications and general features• Pre-wired power supply to reduce installation time• 100-265 VAC 50/60 Hz with auto-switching power supply• Isolated trigger board for 24VAC to 480VAC• Program using traditional DIP switches and potentiometers

O-ADC Nitro/NE Sanitizer pump module

N-LL-TA N-DL-TA

6

Detergent and Rinse Bowls dispense solid or encapsulatedpowders into dish machines, sinks, laundry machines, or any other open reservoir. DEMA offers 2 bowl designs for different applications that can be used for almost any solidproduct applications.

• Mount on any vertical surface or on top of a dish machine• Molded plastic or brass siphon breakers meet ASSE 1001

Standard • Compression and other fittings for easy and secure tube

installations

Detergent and Rinse Bowls

581-1BV

5800V Includes wall mounting kit and bulk head fitting for dish machine use. Uses DEMA plastic siphon breaker. Brass siphon breaker available (5800V-B)

581-RB Solid rinse bowl with wall mounting kit and bulk head fitting plus solenoid valve and level control (24 VAC standard voltage)

581-RB-4 Solid rinse bowl with wall mounting kit and bulk head fitting plus solenoid valve and level control for use with Titan, Nitro, Nitro Express and DemaMaster NE dispensers

Model No. Application Color Specifications

O-PDV Detergent White 110 or 220 volt, timeO-PHV Detergent White 220 volt, timeO-RDV Rinse Blue 110 or 220 volt, speed controlO-RHV Rinse Blue 220 volt, speed controlO-SDV Sanitizer Blue 110 or 220 volt, speed control81-245-1 Programmer 2 Button Programmer

WAREWASH DISPENSERS

Olympian Mini Pumps

O-RDV and O-SDVO-PDV

DNE-LL

Ideal applications include under-counter washers, glasswashers, and small commercial machines.

Specifications• Dual voltage (115/230 VAC) or high voltage only

(230 VAC) models• Mini quick change pump allows tubing replacement

in seconds• Complete pump assembly removes without tools• Units programmed via plug in 2 button programmer

DEMAMaster NE Probe/Probeless DispensersDemaMaster NE is the analog warewash dispenser that uses the Nitro Express circuit board and quick change bluepump. DemaMaster is easy to program with traditional analogprogramming and built to reduce installation and service.

• Probe or probeless from the same unit• Pre-wired power supply to reduce installation time• Quick change pump cover for tool-less tube changing

Model No. No. of Chemicals Pump or Solenoid

DNE-LL 2 Pump/PumpDNE-DL 2 Solenoid/Pump

581-RB5800V

5800V-BV

Uses a 1/4 turn ball valve to control water flow and dispensechemical into a kitchen sink or other reservoir. Needle valvecontrols chemical concentration by adjusting water flow. All the water flow is directed through a vacuum breaker tomeet plumbing codes.

Manual Bowl Dispensers

7

Red, Blue and custom bowl colors available

SOLID PRODUCT DISPENSERS

Model 581KS-1W SolidLaundry DispenserIs a machine triggered dispensing system designedto easily and economicallydispense solid laundry prod-ucts. Programming is donewith a removable 2 buttonprogrammer to avoid enduser tampering. Color LED’sindicate which function isrunning (delay, run time andlock out) and which functionis being programmed withthe 2 button programmer.

• Maximum delay is 20 minutes

• Maximum lock out time is75 minutes

• Maximum run time is 5 minutes or 40 ounces581KS-1W

Electronic Solid Products Bowls

Model 5800V-KS1WSuper BowlThe SuperBowl is a battery-operated solid / powder chemical dispensing for potand pan, silver soak, or laundry applications. The circuit board has programmable run time of 1 second to 10 minutes, builtin 2, 5, and 10 minute lockouts (or no lockout) and a mid-cycle shut off. Can be operated manually orautomatically from a machinesignal.

25-21-8

Model 581KIS-1W Solid Laundry DispenserOperates similar to the 581KS-1W but it includes an injectormounted below the equipment tray that mixes the dilutedproduct from the bowl reservoir with water and delivers it upto 50 feet (15 meters) away from the dispenser.

MODEL NO. DESCRIPTION

Detergent and Rinse Bowls5800V Viking bowl with plastic siphon breaker5800V-B Viking bowl with brass siphon breaker581-WMBH DEMA bowl with plastic siphon breaker581-1WMBH DEMA bowl with brass siphon breaker581-RB DEMA bowl with solenoid and level control (24 VAC)581-RB-4 DEMA bowl with solenoid and level control (24 VAC) for

use with Titan, Nitro, Nitro Express and DemaMaster NEManual Bowls581-1BV DEMA bowl with ball valve and plastic siphon breaker5800V-BV Viking bowl with ball valve and plastic siphon breakerElectronic Bowls581KS-1W Dema Bowl with electronics581KIS-1W Dema Bowl with electronics and injector5800V-KS1W Viking bowl with electronicsMiscellaneous25-21-8 Mechanical TimerColored Bowls Available for Viking bowls only contact customer serviceLogo Bowls Available for Viking bowls only contact customer service

Mechanical timer needs no electricity or batteriesand has a calibrated dial to control a timed water feedfrom 10-60 seconds. Can beused with 5800V, 5800V-B,581-WMBH or other solidbowls.

Mechanical Timer

Custom colors and logos are available with minimum orderquantities. Additional bowls not listed are also available.Contact DEMA customer service for most current models andadditional information.

Bowl Options and Availability

5800V-KS1W

8Warewash and Laundry Pump Squeeze Tubing

WAREWASH AND LAUNDRY DISPENSER PARTS

Solenoid Valves442J-WW-4B Brass Solenoid Valve with cover and bracket81-316-6 Solenoid Valve Kit for Nitro and Nitro Express81-118-19 Solenoid Valve Kit for Titan

Warewash Probes and FittingsC-12VIK Detergent Flip Probe81-28-1 Inductive Probe (For Titan and Nitro only)80-55 90º Fitting for Liquid Detergent Connection81-260-1 Universal 90º Fitting Connection (3/8 or 7/8 hole size)58-5 70º Injection Fitting for Bowl Connection904-8S 1/4”Tube X 1/8” NPT Stainless Check Valve, Stainless Ball904-8T 1/4”Tube X 1/8” NPT Stainless Check Valve, Teflon Ball904-8KY 1/4”Tube X 1/8” NPT Kynar Check Valve, Stainless Ball904-4S 1/4”Tube X 1/8” NPT Stainless Check Valve, Stainless Ball904-4T 1/4”Tube X 1/8” NPT Stainless Check Valve, Teflon Ball

58-281-53

C-12VIK 58-580-55

904-8S 904-8P 81-260-1

Warewash and Laundry MotorsModel No. Voltage RPM Dispenser80-59-15MK 24 VDC 15 rpm Titan and Atlas80-59-60MK 24 VDC 60 rpm Titan and Atlas80-59-105MK 24 VDC 105 rpm Titan and Atlas81-13-115MK 115 VAC 60Hz 115 rpm 84681-14-230MK 230 VAC 60 Hz 115 rpm 84681-15-115MK 115 VAC 60 Hz 60 rpm 84681-17-230MK 230 VAC 50 Hz 115 rpm 84681-289-230MK 230 VAC 50/60 Hz 60 rpm 84681-316-10 24 VDC 118 rpm Nitro / NE81-316-11 24 VDC 35 rpm Nitro / NE

Miscellaneous Parts58-2 ASSE 1001 Approved Plastic Siphon Breaker with Fittings81-53 Test Kit80-66 10” Pick Up Tube 1/4” ID80-66-2 18” Pick Up Tube 1/4” ID81-312-1 12” Pick Up Tube 1/4” ID81-312-3 17” Pick Up Tube 1/4” ID

PART NO. TUBE TUBE SIZE LENGTH FITTINGS APPLICATIONMATERIAL INPUT/OUTPUT

C2 Pump tubes for DM 811 & 812 Dispensers25.65CE.11 EPDM 1/2" OD X 1/4" ID 11" None Warewash and Laundry25.65CV.11 Viton 1/2" OD X 1/4" ID 11" None Warewash and Laundry25.65CA.11 Silicone 1/2" OD X 1/4" ID 11" None Warewash and Laundry25.65NE.11 Santoprene 1/2" OD X 1/4" ID 11" None Warewash and Laundry25.65RE.11 EPDM 1/2" OD X 3/16" ID 11" None Warewash -Rinse & SanitizerC4 Pump tubes for DM 821 & 822 Dispensers25.89CE.14 EPDM 5/8" OD X 3/8" ID 14" None Warewash, Laundry and Industrial25.154.14 Silicone 5/8" OD X 3/8" ID 14" None Warewash, Laundry and IndustrialQuick Change Blue Pump Tubes for Titan and Atlas Dispensers81.177.1 EPDM 7/16" OD X 1/4" ID * 1/4" John Guest Warewash and Laundry81.177.2 EPDM 7/16" OD X 1/8" ID * 1/4" John Guest Warewash -Rinse & Sanitizer81.177.4 Silicone 7/16" OD X 1/8" ID * 1/4" John Guest Warewash and Laundry81.177.5 Viton 7/16" OD X 1/8" ID * 1/4" John Guest Warewash and Laundry81.177.6 EPDM 7/16" OD X 1/4" ID * 3/8" Barb Warewash and Laundry81.177.8 Viton 7/16" OD X 1/4" ID * 3/8" Barb Warewash and Laundry81.177.9 Silicone 7/16" OD X 1/4" ID * 3/8" Barb Warewash and LaundryLarge Blue Quick Change Pump for Atlas, 845 and 846 Dispensers84.208.1 EPDM 5/8" OD X 3/8" ID * 3/8" John Guest Laundry and Industrial84.208.2 EPDM 5/8" OD X 3/8" ID * 3/8" Barb Laundry and Industrial84.208.3 Silicone 5/8" OD X 3/8" ID * 3/8" John Guest Laundry and Industrial84.208.4 Silicone 5/8" OD X 3/8" ID * 3/8" Barb Laundry and Industrial84.208.5 Viton 5/8" OD X 3/8" ID * 3/8" John Guest Laundry and Industrial84.208.6 Viton 5/8" OD X 3/8" ID * 3/8" Barb Laundry and IndustrialOlympian Quick Change Pump for Olympian, Nitro, Nitro Express, Top Shot and Squirt Dispensers81.231.1 EPDM 11MM X 5MM * 1/4" Compression Warewash, Laundry and other81.231.6 Silicone 11MM X 5MM * 1/4" Compression Warewash, Laundry and other81.231.4 EPDM 11MM X 5MM * Cone Fitting Warewash, Laundry and other81.231.5 Silicone 11MM X 5MM * Cone Fitting Warewash, Laundry and other* Fitted for appropriate DEMA pumps Other tubing options available contact customer service

9

Quick Change Blue Pump 81-118-15 Detergent Pump Kit-2 Roller Spring Loaded81-118-16 Rinse Pump Head Kit-3 Roller Fixed81-118-17 Detergent Pump Kit-2 Roller FixedLarge Blue Quick Change Pump84-65-41 Pump Kit completeOlympian/Nitro Quick Change Pump81-316-8 Detergent Pump Kit – 2 Roller complete81-316-9 Rinse Pump Kit – 3 roller complete

WAREWASH AND LAUNDRY DISPENSER PARTS

Pump Head Kits

25-130-125-C2

84-65-1EAC Laundry Conversion Kit

951 Flush Manifold Series951 Flush Manifold dilutes concentrated product with waterand delivers chemical solution to laundry machines in a safeand efficient manner. Flush manifold comes complete withsolenoid valve, pressure switch, and up to six chemical inlets.Inlets are either 1/4” or 3/8” push on or 3/8” barb fittings. Units can be field converted from one connection to another.

84-65-32K

QC Blue Pump

C2 and C4 Pump25-C2 Tri-Roller Rinse Pump Complete25-C2D Dual Roller Detergent Pump Complete25-130-1 Large Pump Kit Complete

Large Blue PumpModule

QC Blue PumpModule

Large Blue Pump Olympian Pump

Valve Module Kits for ATLAS84-65-32K Flush Manifold Valveand Plumbing Connection Kit84-65-32 Flush Manifold Valve Kit

Remote Valve Kit95-RV Remote Solenoid Valve foruse with 951 Flush Series

951-4PV

951-4B

* For use with valve module kit 84-65-32 or other DEMA solenoid valve

Additional models available with 3-7 chemical inputs. Changenumber from 3-7 for desired inputs, identify fitting as P (push) or B (barb) and add -V to include a solenoid valve

Quick Change Blue Pump81-118-18 15 rpm Pump Module Kit81-118-22 60 rpm Pump Module Kit84-65-29 105 rpm Pump Module Kit with 3/8” JG fittings84-65-30 105 rpm Pump Module Kit with 3/8” Barb fittingsLarge Blue Quick Change Pump84-65-36 105 rpm Pump Module Kit with 3/8” JG fittings84-65-37 105 rpm Pump Module Kit with 3/8” Barb fittings

Pump Modules

Laundry Conversion Kits84-65-1 AC Laundry ConversionKit with on board programming84-65-1E AC Laundry ConversionKit EDSM and Data Grip Ready

Laundry Kits

Flush Manifold Series

MODEL No. INPUTS FITTINGS SOLENOID VALVE951-4P-V 4 3/8” Push Yes

* 951-4B 4 3/8” Barb No* 951-4P-P14 4 1/4” Push No

846E-6ZZZZZZ Shown with C4 pumps

LAUNDRY and DISPENSERS

COMMON MODELS:Model No. Description844P-4JJJJ-U 4 Blue QC pumps with EPDM tubes,

3/8” JG fittings and USM remote844P-5JJJJJ-E 5 Blue QC pumps with EPDM tubes,

3/8” JG fittings and EDSM remote844P-5NNNNN 5 Blue QC pumps with EPDM tubes,

3/8” barb fittings and NO remote844P-5PPJJJ-U 5 pumps (2 Large Blue and 3 QC Blue)

with EPDM tubes, 3/8” JG fittings, USM remote

Atlas is the premier on-premise laundry system with a uniquemodular design that provides easy addition of up to 7 pumpsfor greater flexibility. Atlas can accommodate 2 different pump sizes to handle an array of machines, capacities andapplications. Choose between the industry proven standardQuick Change Blue Pump for 16 ounce (475 ml) per minute orthe Large Blue QC Pump for 50 ounces (1480 ml) per minute.

Atlas Features:• ABS enclosure with formula select keypad and display• Modular design that accommodates from 2-7 pumps (6

pumps with a flush manifold)• Two quick change pump options for regular or large

volume• Multiple tube options to handle virtually any chemistry• Quick connect John Guest or barb connection options• 100-265 VAC 50/60 Hz with auto-switching power supply• 24 VDC 105 rpm gear motors• Optional USM formula remote for user formula selection • Separate stand alone EDSM remote for programming and

formula storage plus can be used for formula selection • Data collection and reporting capable through optional

Data Grip (can be used for programming/formula selection)• Order with no remote, with USM or with ESDM.

10

844P-5PPJJJ-V846E Options and Availability

844P Atlas Laundry System

Optional remote U = USM E = EDSM (blank = none)Optional flush solenoid valve V*Pump configuration from left to rightP= Large Blue Pump, EPDM tube, and JG fittingsJ= Blue QC Pump, EPDM tube and JG fittingsNumber of PumpsModel number

The 846E has all the same electronic and programming features as the Atlas but in a large stainless steel case thatcan accommodate up to 6 Large Blue (50 oz / 1480 ml permin.) or large C4 (40 oz. /1185 ml per min.) pumps. The 846Euses AC pump motors for unmatched durability in industrial applications.

846E Features:• Stainless Steel enclosure that can accommodate up to

6 pumps• 100-230 VAC 50/60 Hz auto switching power supply• 115 or 265 VAC 115 rpm gear motors• Four pump options with multiple volume and other

features• Multiple tube options to handle virtually any chemistry• Optional USM formula remote for end user formula

selection (not required)• Separate stand alone EDSM remote for programming and

formula storage plus can be used for formula selection • Data collection and reporting capable through optional

Data Grip (can be used for programming/formula selection)• Order with no remote, with USM or with ESDM.

846E Industrial Laundry Master Dispenser

COMMON MODELS:Model No. Description846E-6SSSSSS 6 Large Blue pumps with EPDM tubes,

3/8” barb fittings, 115 VAC , no remote846E-6TTTTTT 6 Large Blue pumps with EPDM tubes,

3/8” JG fittings, 115 VAC, no remote846E-6ZZZZZZ 6 C4 pumps with EPDM tubes, no fittings,

115 VAC, no remote

Options and Availability

Note that an EDSM (or Data Grip) is required for programming a 844P and 846E but can be used for multiple units

*Additional pump, tube and connection configurations are available. Contact customer service for additional models.

844P - 5 PPJJJ-V U

Option remote U = USM E = EDSM (blank = none) *Pump configuration from left to rightT = Large Blue Pump, EPDM tube, JG fittings, 115 VACS = Large Blue Pump, EPDM tube, barb fittings, 115 VACZ = C4 Pump, EPDM tube, no fittings, 115 VAC

Number of PumpsModel number

846E - 5 TTTTT -U

*Additional pump, tube and connection configurations are available. Contact customer service for additional models.

84-65-38

Enhanced Digital Select Module EDSM II RemoteThe EDSM II is a hand held remote used to program the Atlas and 846E dispensers and can also be used as an enduser formula select. It can store up to 30 formulas and beused to program any number of Atlas or 846E dispensers. The EDSM to can be customized with formula names, has multi-language programming and is password protected.

84-65-39DG

Data Grip Data Collection and Reporting ModuleData Grip is a hand held data collection system designed foruse with the Atlas and 846E. Data Grip’s portable design isideal for periodic monitoring, audits and troubleshooting problem accounts and can be used as the primary formulaselector in place EDSM or USM

• Multi-language display and reports – English, Spanish,French and Portuguese

• Calculates product usage, product cost and formula costsin fluid ounces gallons and pounds or milliliters liters and kilograms

• Three different time period reports available – Date toDate, Billing Date and Billing Cycle

• Concise printable reports downloaded via USB port & USB device

11

844 Laundry Master

846 AC Models with no electronics846-6NE115 6 pump AC Dispenser with no electronics (115VAC)846-6NE230 6 pump AC Dispenser with no electronics (230VAC)

AUTO FORMULA SELECT: Allows laundry machine microprocessor to choose formula soil classification by sending an appropriate length signal to main control board.

RELAY: Allows laundry machine microprocessors to control all functions of the dispenser. Will accept any number of programs sent by the laundry microprocessor.

SEQUENCE: Used on non-programmable, fixed time, and older machines that do not have adequate programming functions. Operates by counting drain closings and pumpingpre-determined amounts of product at correct drain closing.

MANUAL FORMULA SELECT: 9 formula keypads allow non-microprocessor laundry machines to have specific formulas for various soil classifications. Both keypads have bleach defeat and emergency stop buttons.

844-4OBBBBO

The 844 is a smaller stainless cabinet that can be equippedwith 3 to 6 pumps, uses the USM for formula selection andhas on-board programming. The 844 can be equipped withthe QC Blue Pumps or the C2 pump plus can accommodateup to 2 large C4 pumps on the ends.844 Features:• Stainless Steel enclosure accommodates up to 6 pumps• Three pump options with volume from 16 ounces (475ml)

per minute to 50 ounces (1480ml) per minute• 115-230 VAC 50/60 Hz power supply• Multiple tube options to handle virtually any chemistry• 9 formula capability and separate USM formula remote • On-board programming

DEMA Laundry Features:All DEMA 844, 845 and 846 Systems have these common features and modes

845 Industrial Laundry Master

84-65-31

Universal Select Module (USM)End User Formula SelectorThe USM remote is an optional formula selector for Atlas and allLaundryMaster dispensers. The USM provides a convenient easy to understand formula selector.

Programming, Reporting andFormula Select Remotes

The 845 has all the same electronic and programming features as the 844 but in a larger stainless case that canhold up to 6 Large Blue (50 oz / 1480 ml per min.) or C4 (40 oz. /1185 ml per min.) pumps. The 845 uses a 115-230 VAC50/60 Hz power supply and DC pump motors.

LAUNDRY and DISPENSERS

LAUNDRY and HOUSEKEEPING DISPENSERS

8400

830 Series Singleand Multi-Product

830K-1-1

830 Series LaundryMaster dispensers are designed to dispense 1 or 2 products into top loading, coin operated, andother laundry machines up to 100 lb. (45 kg.) capacity. Pumpsare triggered by a signal from the laundry machine or bypushing start button.

Top Shot is a low cost optionfor home style laundrymachines and perfect for selfserve, low volume or specialone product applications.TOP Shot is designed usingthe proven Olympian platformand is ideal for home style upto 75 lb. (35 kg.) commercialmachines and available withEPDM or Silicone Squeezetubes.

830K-1-1 Single product with installation kit 831K-1-1 Two product laundry with installation kit83-R1 One button remote start switch83-R2 Two button remote start switch

Additional models available, contact customer service

Designed for use with the Atlas, 846E or as a stand alonesystem, the Low level alarm canbe used for laundry, warewashor other applications when out of product notification isnecessary. Visual and audiblealarms are activated when thelow level sensor is triggered. An LED light with space to identify the product name onthe unit identifies which productneeds changing.

84-130-1

84-130-1 Low Level Alarm

128400 Top Shot

1 681GAP-1 Stainless Steel2 681GAP-2 Stainless Steel2 681GAP-2P Plastic3 681GAP-3 Stainless Steel3 681GAP-3P Plastic4 681GAP-4 Stainless Steel5 681GAP-5 Stainless Steel

STATION MODEL No. COVER MATERIAL

681GAP-3P

Blend Center’s modular design lets you easily couple togetherany number of stations to create any system to meet yourneeds. Mix and match bottle and bucket fill and choose from blue, red, green, yellow, black, or white buttons. Models listed include Action Gap backflow. Use AG instead of GAP for Air Gap.Model 633GAP-1Action Gap backflow with 1 gpm (4 liters/minute) proportionerModel 633GAP-4Action Gap backflow with 4 gpm (16 liters/minute) proportioner

681 Blend Centers681 units are stainless steel and plastic cover dispensers.Models listed below include 4 gpm (16 liters/minute) proportioners but can be ordered with any combination of high/low flow.

633 Blend Centers

633GAP-B1

681GAP-2

3 MODEL 633GAP UNITS SHOWN COUPLED TOGETHER

8400 Top Shot Single product with remote start and installation kit8401 Top Shot 230 V International model81-245-1 Remote programmer needed for 8400

661GAPDB

Blend Safe II Dispensing SystemBlend Safe II is a modular dispensing system with the flexibility to be used with or without locking cabinets and options to dilute 1-4+ products with 2 fill rates. The cabinets come with removable drip trays, can be mounted vertically or horizontally and hold bottle sizes up to 5 liters (1.3 gal). Models listed include Action Gap backflow. Use AG instead of GAP for Air Gap.

LAUNDRY and HOUSEKEEPING DISPENSERS

662-639GAP (cabinets shown vertical)

662-GAP-1

66-148GAP-2

DISPENSER ONLY DISPENSER WITH CABINETS

NO CABINET 1 Cabinet 2 Cabinets 4 Cabinets

Single Station (1 button)Bottle Fill / Bucket Fill 66-144GAP-1 / 66-146GAP-1 662-GAP-1 / 662-GAP-4Dual Station (2 buttons)2 bottle fill ports 66-148GAP-1 662-2GAPDB-11 662-2GAP-111 bottle & 1 bucket fill 66-148GAP-2 662-2GAPDB-14 662-2GAP-142 bucket fill ports 662-2GAPDB-44 662-2GAP-444 Station (4 buttons)4 bottle fill ports 662-4GAP-1111-2 662-4GAP-1111-43 bottle & 1 bucket 662-4GAP-1114-2 662-4GAP-1114-42 bottle & 2 bucket 662-4GAP-1144-2 662-4GAP-1144-4Dial-A-Blend Systems1 product at 4 dilutions 66-149GAP-2 662-635GAP-44 products bottle & 1 bucket 66-151GAP 662-639GAP4 products bucket fill 66-150GAP-2 662-637GAP-44 products bottle fill 66-150GAP-1 662-637GAP-14 products bottle and

4 products bucket fill 66-151GAP-2

Additional models available, contact DEMA customer service

661 Blend Safe Stainless SteelLocking DispensersThe 661 Blend Safe Series offer safety and security when it is necessary for gallon bottles to be self contained inside the dispenser. Units are lightweight and have a mounting flangeoutside the dispenser for easy installation.

Model 661GAPBOne station (1 gpm) with Action Gap backflow preventerModel 661GAPDBOne station with two buttons (1 gpm and 4 gpm) with Action Gap backflow preventerModel 661GAP-4Four station with Action Gap backflow preventer (standard configuration is three 1 gpm proportioners and one 4 gpm proportioner)Model 661GAPS-4four station with Action Gap backflow preventer and stainlesssteel drip tray

661GAP-4

13

Blend Safe II Model Options:

14HOUSEKEEPING DISPENSERS

Dilution at HandTM ExtremeDispensing System

REMOTE BUCKET FILL

ONE HAND BOTTLE FILL

Single Station Options / One Fill Port Option

830GAPRF-Q1G

801GAP

802GAPRF-S1G Dilution at HandTM Extreme features:• Remote fill option for easy filling of buckets and

scrubbers when location flexibility is required• One-hand bottle fill allows operator more flexibility

when filling spray bottles• Action Gap and Air Gap backflow options to meet local

plumbing agency requirements• Sleek design and enhanced color scheme to present

modern appearance for end user accounts• Snap-together selector valve design reduces

number of components from 14 to 5, and eliminates all metal components resulting in a maintenance free selector

• 1 gallon-per-minute flow control disc improves dispensing accuracy with ultra lean dilutions as compared to other dispensing systems

• Optional 1 gallon (5L) or 2 liter (1/2 gal.) locking enclosures are available to meet today’s various packaging sizes and feature:

• Modular design allows any number of cabinets to be coupled together

• Built-in hinges improve cabinet durability• Molded drip tray snaps into locking enclosure

802GAP

804GAPRF

The Dilution at Hand (DAH) Extreme has a sleek design andenhanced color scheme that provides a modern appearancein any housekeeping environment plus multiple features toenhance productivity and dispensing flexibility. DAH Extremeoffers the convenience of 1 handed bottle filling and point ofuse remote bucket fill activation. Its modular design allowsthe dispensers to be used with or without locking cabinets and with or without selector valves for the ultimateflexibility from 1 to 8 product options.

Single stations are available with the following options:

1. Bottle fill or bucket fill. Choose either low flow bottle fill or high flow bucket fill with activation at the unit orremote point of use activation.

2. Dedicated single product or multi-product/dilution.Choose either a dedicated product fill port or a fill portwith selector valve for up to 4 products or 4 dilutions.

3. Stand alone or with locking enclosure/s or rack. Choose from either 1 gallon (5 L.) or 2 liter (1/2 Gal.) locking modular enclosures or a 1 gallon / 3+ liter rack foreither 1 product or 4 products. The modular enclosuressnap together to form any combination of cabinets

1313

FLOW CONTROLDISC

BUILT IN HINGE

HOUSEKEEPING DISPENSERS

SELECTOR VALVE

822GAPRF 830GAPRF 831GAP

Dual Station / Two Fill Port OptionDual stations have two filling ports and available with the following options: 1. Bottle fill only, bottle & bucket fill or bucket fill only. Choose

any combination of low flow bottle fill or high flow bucket fill.Bucket fill is available with activation at the unit or remote pointof use activation.

2. Dedicated single product or multi-product/dilution at each port.Each fill port can be dedicated to a single product or equippedwith a selector valve for up to 4 products or 4 dilutions. With 2 filling ports, a dual station can dilute from 1 to 8 products or 8 dilutions.

3. Stand alone or with locking enclosure/s or rack. Choose from either 1 gallon (5 L.) or 2 liter (1/2 gal.) locking modularenclosures or a 1 gallon / 3+ liter rack for either 1 product or 4 products. The modular enclosures snap together to form any combination of cabinets.

DISPENSER ONLY

MODEL NUMBERSDISPENSER DESCRIPTION DISPENSERS WITH LOCKING ENCLOSURE/S

SINGLE (ONE) ENCLOSURE DUAL (TWO) ENCLOSURES QUAD (FOUR) ENCLOSURES1 GAL / 5 LTR 2 LITER / 1/2 GAL 1 GAL / 5 LTR 2 LITER / 1/2 GAL 1 GAL / 5 LTR 2 LITER /1/2 GAL

SINGLE STATION FOR 1 PRODUCTBottle Fill 801GAP 801GAP-S1G 801GAP-S2LBucket Fill 802GAP 802GAP-S1G 802GAP-S2LBucket Fill with Remote Activation 802GAPRF 802GAPRF-S1G 802GAPRF-S2LSINGLE STATION WITH DIAL-A-BLEND SELECTOR (1-4 PRODUCTS)Bottle Fill for 4 Chemicals 803GAP 803GAP-Q1G 803GAP-Q2LBucket Fill for 4 Chemicals 804GAP 804GAP-Q1G 804GAP-Q2LBucket Fill for 4 Chem. with Remote Activation 804GAPRF 804GAPRF-Q1G 804GAPRF-Q2LBottle Fill for 1 Chemical at 4 Dilutions 805GAP 805GAP-S1G 805GAP-S2LBucket Fill for 1 Chemical at 4 Dilutions 806GAP 806GAP-S1G 806GAP-S2LBucket Fill for 1 Chem. at 4 Dil. w/Remote Fill 806GAPRF 806GAPRF-S1G 806GAPRF-S2LBottle Fill for 4 Chem. w/ 1 Handed Fill Only 809GAP 809GAP-Q1G 809GAP-Q2LDUAL STATION FOR 1-2 PRODUCTS2 Bottle Fill Ports 820GAP 820GAP-D1G 820GAP-D2L1 Bottle and 1 Bucket Fill Ports 822GAP 822GAP-SIG 822GAP-S2L 822GAP-D1G 822GAP-D2L1 Bottle and 1 Bucket Fill w/ Remote Fill 822GAPRF 822GAPRF-SIG 822GAPRF-S2L 822GAPRF-D1G 822GAPRF-D2L2 Bucket Fill Ports 824GAP 824GAP-D1G 824GAP-D2LDUAL STATION WITH DIAL-A-BLEND SELECTOR/S (1-8 PRODUCTS)1 Bottle Fill Port with Selector (up to 4 Chem.)

and Bucket Fill for 1 Chemical 830GAP 830GAP-Q1G 830GAP-Q2L1 Bottle Fill Port with Selector (up to 4 Chem.)

and Remote Bucket Fill for 1 Chemical 830GAPRF 830GAPRF-Q1G 830GAPRF-Q2L1 Bottle Fill Port with Selector 1 Chemical at

4 Dilutions and Bucket Fill for 1 Chem./Dilution 832GAP 832GAP-S1G 832GAP-S2L 832GAP-D1G 832GAP-D2LDual Selector Valves for Bottle and Bucket

8 total products (1-4 each selector) 831GAP 831GAP-Q1G 831GAP-Q2LDual Selector Valves for Bottle and Remote

Bucket 8 total products (1-4 each selector) 831GAPRF 831GAPRF-Q1G 831GAPRF-Q2L

NOTE: Action gap back flow preventer listed. For air gap substitute AG for GAP in part number (examples: substitute 801AGfor 801GAP). Additional dispensers are available and not listed.

Additional components may be needed to run product/s at multipledilutions. Contact DEMA customer service or your RegionalManager with any questions.

15

16

Racks forChemical Bottle Storage930-1R One station non-lockingrack for round bottles930-1FOne station non-locking rack for F-style bottles931-2Two station locking rack930Three station non locking rack931Three station locking rack

Accessories and Spare Parts

66-43Pressure regulator (40 psi / 2.5 bar) with GHT connections

16-30 Action Gap backflow preventer61-22-3 Four gpm proportioner61-99-2 One gpm proportioner

61-22-3BAG Four gpm air gap proportioner61-32BAGOne gpm air gap proportioner

931-2

68-6 Pressure IndicatingTee is designed to protectfaucet backflow devicesnot rated for continuoussupply pressure and to virtually eliminate hot coldwater cross connection. This device is tested andcomplies with ASSE 1055-1997 and required by somestate and local regulatoryagencies. Check localplumbing regulations forback flow and connectionrequirements.68-6QD1Tee with Male QuickDisconnect68-6QD2Tee with Male and FemaleQuick Disconnect

HOUSEKEEPING DISPENSERS

100-15K Tip kit for dilutions from 4:1 to 427:1100-15KUUltra lean tip kit for dilutions from 150:1 to 915:144-61PCapillary tip for dilutions of 512:1 to 1024:1 and leaner

68-6

60-54

44-3N-6 Six feet (2 meters) nylon braided hose44-3-6Six feet (2 meters)black hose

44-3N-6 66-43

61-22-3BAG 16-30 with 61-22-3

930-1R

100-16E

931

100-15KU100-15K

100-16E1/4" and 3/8" Diaphragm footvalve with EP seal100-16S1/4" and 3/8" Diaphragm footvalve with silicone seal100-16V1/4" and 3/8" Diaphragm footvalve with viton seal60-541/4" in line check valve100-12 Eight feet 1/4" ID inlet tubing61-21Six feet 1/2" ID outlet tubing forAction Gap backflow preventerand proportioner63-83Six feet 9/16" ID outlet tubingfor Air Gap proportioner

13 1/2"x6 1/2"

7 5/8"x4 3/8" 19 1/2"x6 1/2"

17Drum Mount DispensersModel 161 and 162 Series drum mount dispensers mount toany 2 1/2” bung opening to dispense chemical solution directly from the drum or tote at the correct dilution. Variousmodels are available to meet standard and high inductionapplications.

Model 162 Standard model dispenses 5 gpm (20 liters perminute) with maximum induction of 5-1, metering screwadjustment

Model 162-3 Standard model dispenses 5 gpm with a maximum induction of 5-1, metering tip adjustment

Model 161 High induction model dispenses 5 gpm with amaximum induction of 1.5-1, brass construction with meteringscrew adjustment.

Model 162HC High induction model dispenses 1/2 gallon perminute (2 liters per minute) with a maximum induction of morethan 1-1 ratio. Ideal dispenser for applications such asantifreeze mixing where more product than water is required.

Model 162HDM-2 High Flow Drum Mount Proportioner mounts directly to a 2 1/2” bung opening on a drum or toteand dispenses at 10 gallons per minute (40 liters per minute).Draws up to 12 ounces per gallon chemical solution and discharge hose can be up to 25 feet (8 meters) long. Shutoffvalve (DEMA #90-15) can be put at end of hose for on/off control and uses metering tips to determine dilution ratio.

INDUSTRIAL DISPENSERS

Model 607-3 High FlowDispenser fills Auto Scrubbersand other large reservoirs at 10gallons per minute (40 liters perminute) to reduce fill time.

• 10 gpm flow rate at 40 psi(3/4” or larger water supplyrequired)

• Vacuum breaker installed• 10 feet discharge hose• Metering tips determine

dilution ratio• Stainless steel cover offers

durability and industrialappearance

• PVC proportioner allowsdual chemical injection

162HC162HDM-2

607-3

162

MODEL NO. DESCRIPTION440-23BT 4 gpm flow rate Action Gap backflow

protection440-24 2.5 gpm flow rate Action Gap backflow

protection437P-21 22 gpm flow rate with siphon breaker440N 6 gpm (water valve only)437PN 64 gpm (water valve only)

440-23BT

440 WATCH GUARDReservoir Mounted Float Valve SystemWatch Guard is designed to reduce service and potential problems with more reliable water valve activation. The float is filled with water soluble material and the 90° chemical barbrotates 180° to ensure the chemical pick-up tube does not kink • Mounting bracket included with every system • On-Off valve included on all 440 chemical series systems • Metering tip kit included with every unit

High Flow Dispensers

18

Specifications:

RAPID FIRESpray and Foam Dispenser

• Dimensions

8" W x 9 1/4" H x 5 3/8" D

(203 mm x 235 mm x 137mm)

• 2.7 gpm (10 L.) Injector Flow Rate

• Operating Range

20-125 psi (1.3 - 8.6 bar)

• Water temperature up to

160°F (71°C)

• Functions with up to 50 feet

(15 meters) of 1/2" (13 mm)

ID hose

• Optional hose hanger with hose

strain relief feature

• Stainless steel enclosure and

chemical resistant polypropylene

internal components

Effective cleaning and sanitizing for:• Supermarket meat room, seafood, and bakery

departments• Kitchens and food preparation areas• Locker rooms and showers in schools and

health clubs• Food processing and packaging plants

Innovative Features and Benefits:• Single knob to control water flow and

chemical selection— Full water flow when valve opens— Accurate dilutions— Eliminates confusion— Prevents mixing of chemicals

• Removable Injector— Easy maintenance and replacement

• Built in foam wand hanger— Helps prevent foam wand loss or damage

6300-3

SPRAY CLEAN DISPENSERS

MODEL NUMBERS AND KITS6300-1 Dispenser only6300-2 Dispenser with 44-3RG red outlet hose, 44-3-6 black inlet hose, and

40-14QD/292QD spray gun / foam wand kit6300-3 Dispenser with 44-3RG red outlet hose, 44-3-6 black inlet hose,

28-1QD spray gun and 292GQD foam wand6300-4 Dispenser with 44-3RG red outlet hose, 44-3-6 black inlet hose, 40-14QD/

292QD spray gun / foam wand kit and 44-89-112 backflow preventer6300-5 Dispenser with 44-3RG red outlet hose, 44-3-6 black inlet hose,

28-1QD spray gun, 292GQD foam wand and 44-89-112 backflow preventer

ACCESSORIES44-3RG 25 feet (8 meters) red hose44-3N-25 25 feet (8 meters) clear nylon braided hose44-3-6 6 feet (2 meters) black hose44-3N-6 6 feet (2 meters) clear nylon braided hose40-14QD/292QD Ball valve activated spray gun with quick connect foam wand28-1QD Lever controlled spray gun with quick connect nozzle292GQD Quick connect foam wand44-89-112 ASSE 1012 approved constant pressure backflow preventer44-111-1560 Brass nozzle with quick connect groove44-111-1560SS Stainless steel nozzle with quick connect groove44-6 Stainless steel hose hanger

Additional hoses, spray guns, foam wands, nozzles, and other accessories available through DEMA Customer Service

19

606T

DEMA manufactures a variety of SprayClean dispensers tomeet different cleaning environments. Whether it’s a wallmounted unit for cleaning one area or a mobile unit that offersportable cleaning, DEMA can satisfy the requirement. Wash,rinse, and sanitize all from the same system.

SPRAY CLEAN DISPENSERS

SprayClean Accessories

40-14QD/292QDSpray Gun and Foam Wand set

28-1QD and 292GQD Spray Gun and Foam Wand set(order items separately)

44-89 Constant pressure backflowpreventer

44-3N-2525 Feet (8 meters) nylon braided outlet hose 44-325 Feet (8 meters) black outlet hose44-3RG (shown)25 Feet (8 meters) red outlet hose

44-3N-66 Feet (2 meters) nylon braidedwater supply hose 44-3-6 (shown)6 Feet (2 meters) black watersupply hose44-4S Stainless steel hose bracket

Model 606T-2 Spray Station IIThe Spray Station II is a wallmounted ball valve actuated 2 chemical and rinse system.The unit features easy to turnlarge handles and a chemicaland impact resistant ABS cover.• Designed for greater

durability, reliability andeasier serviceability

• Stainless steel manifoldsystem with O-ring sealsfor easy removability andservice

289

Portable Foaming and SprayingModel 289Pro Foam hose end foamer andsprayer attaches to the end of anygarden hose and produces a foamwhen the aerating wand is attachedand sprays when the wand isremoved. Quick disconnect allowsspray gun to be easily removed from dispenser for clear water rinse. Ideal applications include supermar-kets, food service areas, and showerrooms where portability is required.Unit includes a 32 ounce bottle andspray gun with quick disconnect fittings.

Model 606T Select-O-MaticBall valve actuated SprayClean that dispenses two chemicalproducts and clear rinse.

• Stainless steel cover• Polypropylene injectors for

chemical and hard waterresistance

• Brass internal components

606T-2

Wall Mounted Dispensers

FoamStation DispensersFoamStation Dispensers are wall mounted or cart mountedcompressed air foaming systems that use DEMA’s 294D PVC foamer body. Applications for these units include allfood processing and food service areas, industrial plants,school shower areas, and other areas that require foamingchemicals to help clean.

Units require an air compressor and at least 40 psi waterpressure to produce quality foam.

• PVC foamer body for chemical and hard water resistance• Polypropylene cover offers neat appearance• Stainless mounting plate for sturdy mounting• PVC manifold with slip together fit offers easy field

maintenance• Metering tips determine dilution ratio

Model 692TTwo ball valves provide one foaming chemical and clear rinse from this wall or cart mounted unit.

Model 693TThree ball valves provide one foaming chemical, clear rinse, and a sanitizer (or other chemical product) spray. The sanitizer product is run through DEMA’s P203CT injector that produces 2.7 gallons per minute (10.25 liters per minute) flow.

Model 93-18 PVC Foam wand with plastic ball valve can be used with anyof DEMA’s compressed air foamers. Material allows it to beused with corrosive chemicals, including many acids.

693T692T

20

294DModel 294DCDesigned for applications that require a compressed airfoamer enclosed in a stainless steel housing and ball valvesfor on/off control of water and air. Air pressure gauge isseen through front cover and easily adjusted while the unit is mounted. Metering tips determine the correct chemical dilution.

294DC

Compressed Air FoamersModel 294 mixes chemical solution with water and air to produce a dry, thick, clinging foam to any vertical or horizontal surface for cleaning large areas and areas thatrequire a foam to penetrate for better cleaning results. The foam consistency is changed easily by adjusting eitherthe air or water pressure. PVC body is designed to preventhard water and chemical buildup to help produce consistent,long term cleaning results.

Applications include:• food processing plants• truck and vehicle washing• bakeries • school shower areas• other industrial areas

Model 294DPVC Compressed Air Foamer body with air inlet port, airadjustment gauge, water inlet connection and tubing forchemical supply. Simply hook up compressed air and waterand adjust to produce desired foam. Metering tips determinethe correct chemical dilution. Minimum recommended airand water pressure with 25 feet of hose is 40 psi.

COMPRESSED AIR FOAM DISPENSERSModel 93-1425 feet 3/4" ID black water outlet hose. 3/4" ID hose is recommended to minimize back pressure put on foamer.

Model 93-18 PVC Foam wand used with all DEMA compressed air foamers.Includes water inlet coupling, ball valve for on/off control, andnozzle. Foam throw varies based on water and air pressuremixture. Average throw is 25 feet (8 meters).

93-18

MAXIMUM HOSE LENGTHS AND MINIMUM PRESSURES FOR GOOD FOAM

HOSE SIZE AND LENGTH MINIMUM PRESSURESWater Air

25 Feet (8 Meters) of 3/4" ID 40 PSI (2.7 Bar) 40 PSI50 Feet (15 Meters) of 3/4" ID 50 PSI (3.4 Bar) 40 PSI75 Feet (25 Meters) of 3/4" ID 60 PSI (4.1 Bar) 40 PSI

21 COMPRESSED AIR FOAM DISPENSERS

NOTE:Air compressor is not part of dispenser and required to use allDEMA compressed air systems.

925

925 Mobile FoamerThe 925 is a 25 gallon portable foamer that offers innovativefeatures and ergonomics for industrial and institutional foamcleaning. This unit’s four wheel design allows for a widerange of mobility and the convenient drain feature allows foreasy emptying.

910910 Portable Foamer The 910 offers an innovative 10 gallon tank design that allows foreasy storage and institutional foamcleaning. The non-pressurized tankpromotes safety and consistentfoam time after time.

900-DS4

900-DS4 Doorway FoamingSanitizer SystemThe 900-DS4 Doorway sanitizer foaming system allows the control box to be mounted up to 150 feet away from the spray tip assembly. The new foamenhancing nozzle is constructed of Stainless Steel and produceslarge amounts of foam. This allowsfor shorter run times and a largerfoam coverage area. The 900-DS4can operate up to three nozzleassemblies simultaneously.

900 Series Compressed Air Foamers

900-2PU

900 Pump Up Foaming DispenserThe 900-2PU pump-up foamer technology provides spotcleaning and sanitation solutions for the industrial and institutional markets. Patented dual tube technology drawsthe chemical and air from the tank into separate tubes creating thick foam when mixed at the trigger operated foamwand. Flow in the air tube is controlled by a needle valve giving an operator the ability to control foam consistency.

900-WALL

900 Wall Mounted Foaming DispenserThe 900-WALL operates with a pre-mix solution of foamingchemical and water. The unit produces 30 gallons of foam perminute and covers 5-10 cubic feet per minute at 40-80 PSIwith up to 25 feet of foam distance.

22MIXRITE PUMPS

MixRite Water Powered Proportioning Pump

570 CL 570 PVDF

MixRite Water Driven Injectors arewater powered proportioning pumpsthat require no electricity and deliveraccurate dispensing across varyingwater pressure and flow. MixRites useonly 10% of the pressure at mid-rangeto drive the pump (20% maximum) andare easy to adjust and service.

Specifications:• Chemically resistant nylon reinforce

fiberglass body on all models(except PVDF)

• CW models feature stainless steelsprings

• CL and PVDF models featureHastelloy springs

• Chemical shutoff on 571, 573 and 575 units

• Easily replaceable wear parts• Higher operating range from 2.9 PSI

to 120 PSI• Hose barbs with swivel for easy

installation• Injection from 300:1 to 10:1

(.3% to 10%)• Flow rate from .09 to 11 gallons

per minute• Includes 7 ft. 3/8" inlet tubing with

foot valve strainer • Dimensions: 19 1/2" high, 7" wide• Optional Tip Kit for dilutions from

750:1 to 2000:1

50-41-1 Strainer200 Mesh (80 Micron) Strainerrecommended on all installations

57-11-1 Tip Kit (for 570 and 571)for Lean Dilution Ratios750:1-2000 and Includes 4 metering tips, 8 ft. 1/4" vinyl hose and 1/4"x3/8" barb adapter

574 and 575 Units are available for richer inductionsfor 33:1 to 10:1

Applications:

• Vehicle Wash• Food and Beverage Sanitizing,

Cleaning and Lubricating• Machine Tool Coolants and

Metal Processing• Animal Medication• Foaming for Food Service

Sanitation• Fertigation

(Fertilizer/ irrigation injection)• Many other applications

where applying liquid underpressure

571 CW 574 CL

MODEL No. PSI RATIO PERCENT Oz/Gal FEATURES APPLICATIONS

570CW 2.9 - 120 300:1 to 50:1 .3% - 2% .38 to 2.5 Tip Kit Option Carwash Cleaning Agents & Detergents571CW 2.9 - 120 300:1 to 50:1 .3% - 2% .38 to 2.5 Chemical On/Off, Carwash Cleaning Agents & Detergents

Tip Kit Option572CW 2.9 - 120 250:1 to 25:1 .4% - 4% .51 to 5.1 Carwash Cleaning Agents & Detergents 573CW 2.9 - 120 250:1 to 25:1 .4% - 4% .51 to 5.1 Chemical On/Off Carwash Cleaning Agents & Detergents574CL 2.9 - 120 33:1 to 10:1 3% - 10% 3.8 to 12.8 Hydrofluoric acids, Tire Cleaners, Chlorine, and other harsh chemicals575CL 2.9 - 120 33:1 to 10:1 3% - 10% 3.8 to 12.8 Chemical On/Off Hydrofluoric acids, Tire Cleaners, Chlorine, and other harsh chemicals 570CL 2.9 - 120 300:1 to 50:1 .3% - 2% .38 to 2.5 Tip Kit Option Hydrofluoric acids, Tire Cleaners, Chlorine, and other harsh chemicals571CL 2.9 - 120 300:1 to 50:1 .3% - 2% .38 to 2.5 Chemical On/Off, Hydrofluoric acids, Tire Cleaners, Chlorine, and other harsh chemicals

Tip Kit Option572CL 2.9 - 120 250:1 to 25:1 .4% - 4% .51 to 5.1 Hydrofluoric acids, Tire Cleaners, Chlorine, and other harsh chemicals 573CL 2.9 - 120 250:1 to 25:1 .4% - 4% .51 to 5.1 Chemical On/Off Hydrofluoric acids, Tire Cleaners, Chlorine, and other harsh chemicals

NOTE: PVDF available on all models for the most extreme chemicals

23

Wall Mount Foam SystemsCompressed Air FoamSystems include MixRite,foam chamber, 25' hose, and foam wand.Spray systems includeMixRite, 25'hose and spray gun. 577 CBSR

Wall and Cart Mounted CompressedAir Foam Systems MixRite Compressed Air Foam Systems allow any length ofhose installed on the outlet of dispenser. The hose length orfoam wand nozzle size have no affect on the foam quality,which makes these dispensers ideal for foaming applicationsutilizing long runs of hose or pipe.

Wall Mounted Units570WS Spray unit, 2% induction571WSR Spray and Rinse unit, 2% induction572WS Spray unit, 4% induction573WSR Spray and Rinse unit, 4% induction573WSFR Spray, foam and Rinse unit, 4% induction573WAFR Compressed Air Foam and Rinse unit,

4% induction576WBS Spray bypass unit, 2% induction577WBSR Spray and Rinse bypass unit, 2% induction578WBS Spray bypass unit, 4% induction579WBSR Spray and Rinse bypass unit, 4% induction579WBSFR Spray, Foam, and Rinse bypass unit, 4% induction579WBAF Compressed Air Foam bypass unit, 4% induction

Cart Mounted units available for all systems listed. Substitute C for W in part number (example 570CS for 570WS)

MIXRITE FOAMERS AND MOBILE DISPENSERS

901-693T

MODEL No. APPLICATION DESCRIPTION (Dispenser page)

MixRite Systems Spray & Foam Wall mount units previous column 901-606T-2 Spray Spray Clean 2 product plus rinse

3 ball valve actuated unit (pg 19)901-6300 Spray Rapid Fire 2 product plus rise dial

actuated unit (pg 18)901-692T Foam Foam Station 1 product plus rinse

2 ball valve actuated (pg 21)901-693T Foam Foam Station 2 product plus rinse

3 ball valve actuated (pg 21)

Mobile Cart Cleaning SystemsDEMA’s mobile cart system puts everything needed for cleaning, sanitizing and foaming on two wheels. The unit isavailable with a wide selection of DEMA spray, foam and proportioning dispensers and is designed to provide a holdingplatform for chemicals and hangers for hoses. Ideal for use in shower rooms, large kitchens, food processing plants, store food preparation, storage areas and anywhere that permanent installations are impractical.

Mobile Cart Features:• Pneumatic tires and plastic frame capable of heavy loads

up to 600 lbs. (270 kg.)• A wide selection of DEMA dispensers• 25 feet (8m) outlet hose and 6 feet (2m) inlet hose on most

units• Spray gun or foam wand included (for spray or foam units)• Built in hose hangers and secure chemical storage area

AVAILABLE MODELSFoam Station III is a drop station designed to work with the500 series MixRite pumps. Place the Foam Station III wherev-er you need foam cleaning and supply it with compressed airand diluted chemical. Recommended for use with any .4-4%MixRite system, Foam Station III has these unique features:• Superior foam and foam control than any other system• Internal diffuser allows foam generation of chlorinated

products• 60-100 gallons (227-380L) of foam per minute• Simple ball valve actuation and knob adjustmentContact DEMA customer service or your Regional Managerfor assistance with drop station layout and requirements.

582-1 Foam Station III Drop Station

582-1

24

Special InjectorsModel 201CHT1/8” brass injector designed to draw up to 1-1 ratio at 1/2 gallon per minute (2 liters per minute) flow. Ideal for mixtureof antifreeze and water for windshield washer filling.

DEMA OFFERS SEVERAL PLASTIC AND STAINLESS STEELINJECTORS FOR CORROSIVE APPLICATIONS.

Model P203C or P203CT:3/8” polypropylene plastic injector with flow rate of 4 GPM at 40 psi (16 liters per minute at 2.75 bar)

Model 203BS-2 or 203BST-2:3/8” stainless steel injector with flow rate range of 3 to 9 GPM at 40 psi (12 to 36 liters per minute at 2.75 bar) 1/2” size available (204 BS-2 or 204BST-2)

CHEMICAL INJECTORS

Chemical InjectorsDEMA manufactures two different types of injectors, eachhaving their own way to control water flow. The C seriesinjectors use one of three different water nozzle bushings tocontrol water flow and the B series use an external bypassknob for controlling water flow. Injectors are available from1/8” NPT up to 1” NPT. (BSP threaded injectors available).When choosing an injector it is important to size the injectoraccording to the application’s water flow, not pipe size.Injector metering knobs can be supplied with a metering tip option (example 204CT) or metering screw option (example 204C).

Contact DEMA’s customer service for information on DEMA’s B and C series injectors and selection tables(Industrial catalog 2007IND) or at www.demaeng.com

204C 204B

P203C 203BS-2

244C

SprayClean InjectorsSprayClean Injectors do not include covers, ball valves, orany other device to make them a complete system. Theseunits include the injector assembly, appropriate spray gun foreach model and the chemical inlet tubing assembly. Theseare very basic units that may be wall or drum mounted to dispense one chemical.

Model 244C Three-position gun allows user to choose chemical, clear water rinse, and off setting at the spray gun.When gun trigger is pulled completely, vacuum is drawn ininjector and chemical is dispensed through spray gun.Releasing the trigger halfway to rest against a latch will eliminate vacuum draw of chemical and only spray clearwater for rinsing.

Model 244BC Slide valve on chemical injector allows user tochoose between wash and rinse setting. Squeezing the spraygun fully open turns the unit on and dispenses either thechemical or clear rinse, depending on slide valve setting.(This model allows for a harder spray when rinsing comparedto the 244C model).

Model 244CDMDrum Mount Model of 244CModel 244BCDM Drum Mount Model of 244BC

Pressure Indicating Tee 68-6ASSE 1055-1997IAPMOASME

Model 153 and 154ASSE 1055-97

633 Valve BodyNSF-61

58-1 Siphon BreakerASSE 1001

DEMAMaster Dishwash SeriesCSA

TITAN DishwashCE, CSA

ATLAS LaundryCE, CSA

METRIC CONVERSIONS

DEMA Engineering Co.ISO 9001:2008 Certified

To go from Multiply by To getGallons 3.785 LitersOunces 29.57 MillilitersPSI 0.068 BarInches 25.4 MillimetersFahrenheit 5/9(F-32) CelsiusLiters 0.2642 GallonsMilliliters 0.34 OuncesBar 14.5 PSIMillimeters 0.0394 InchesCelsius 9/5C+32 Fahrenheit

APPROVALS

Action Gap Backflow PreventerASSE 1055-1997IAPMOCSAVarious U.S. states and citiesAustralia

Ultra Gap Air Gap ProportionerASSE 1055-1997IAPMOASMECSAVarious U.S. states and citiesKIWA-NetherlandsAustraliaDVGW-GermanyWRC-United Kingdom

METRIC CONVERSIONS

25

DEMA Global Headquarters10020 Big Bend BoulevardSt. Louis, MO 63122Phone: (800) 325-3362Fax: (314) 965-8319www.demaeng.comemail: sales @demaeng.com

Viking LLC512 Industrial RoadNesquehoning, PA 18240Phone: (800) 441-1343Fax: (570) 645-3679www.viking-injector.comemail: sales@viking-injector.com

DEMA Europe LLCMast 25, 3891 KEZeewolde, NetherlandsPhone: 31-(0)-36-522-7006Fax: 31-(0)-36-522-7863www.demaeurope.comemail: sales@demaeurope.com

DEMA AustraliaUnit 8, 7-11 Parraweena RoadCaringbah N.S.W. 2229Sydney, AustraliaPhone: 61-2-9525-5177Fax: 61-2-9525-5033www.dema.com.auemail: sales@demaust.com

DEMA China Representative OfficeRoom 1317, SIPAI Plaza103 Cao Bao RoadShanghai, 200233 P.R. ChinaPhone: 86 21-5424 7729Fax: 86 21-6464 1721email: johnzhu@demachina.com.cn

DEMA Latin America Sistemas deDosegem LtdaRua Andre Ampere, 153 Cj. 67Edificio Terra BrasilisCEP 04562-080 Brooklin Sau Paulo BrazilPhone/Fax: (5511) 3853-8958Mobile: (5511) 8579-3477email: omarpuras@uol.com.br

DEMA Engineering Company • 10020 Big Bend Boulevard, St. Louis, MO 63122 • (314) 966-3533 • www.demaeng.com • sales@demaeng.com

D I S P E N S I N G S Y S T E M S C A T A L O G

Cata

log

2010

DIS

P

Dispensing Innovation