delta - turf · 14 green 39 lavender 9mm felt turf’s delta carved wall tile is made with 9mm pet...
TRANSCRIPT
PAGE 1
DELTAcarved wall tile
PATENT PENDING
Delta is TURF’s edgiest tile. Its linear pattern of channels gives walls dimension—and ups their acoustic value in a space. Made from sound-absorbing PET felt, the carved wall tile is available in a single color (9 mm) or in two-tone styles (12 and 18 mm).
[email protected] turf.design 844 TURF OMG DELTA PATENT PENDING 05.19 PAGE 2
SPECSPRODUCTDelta carved wall tile
CONTENTpolyester (PET) felt60% pre-consumer recycled
9MM TILEDIMENSIONS13.5" W x 11.7" H x 9 mm T
FELT THICKNESS9 mm (base)
BEVELED EDGEcarved at a 45˚ angle4.5 mm from the bottom
12MM TILEDIMENSIONS13.5" W x 11.7" H x 12 mm T
FELT THICKNESS9 mm (base) + 3 mm (top)
BEVELED EDGEcarved at a 45˚ angle4.5 mm from the bottom
18MM TILEDIMENSIONS13.5" W x 11.7" H x 18 mm T
FELT THICKNESS9 mm (base) + 9 mm (top)
BEVELED EDGEcarved at a 45˚ angle6.5 mm from the bottom
FRONT VIEW
H
W
BASE COLOR
BASE COLOR
BASE COLOR
TOP COLOR
TOP COLOR
T
SIDE VIEWenlarged edge
07 BLACK
01 CREAM
78 WHEAT
70 AQUA
20 MANGO
94 CORAL
06 CHARCOAL
50 IVORY
82 BARLEY
90 SKY
62 SUNFLOWER
42 ORANGE
38 MATTE GREY
05 WHITE
54 LATTE
25 LIGHT BLUE
45 YELLOW
16 RED
86 SLATE
66 PEWTER
48 LIGHT BROWN
74 DENIM
47 LIME
58 RASPBERRY
98 STORM
04 LIGHT GREY
32 BROWN
29 DARK BLUE
14 GREEN
39 LAVENDER
9MM FELTTURF’s Delta carved wall tile is made with 9mm PET felt board. The process used to create PET felt often results in a heathered effect where multiple tones are present. Slight variations in color should be expected when using this sustainable material.
Felt thickness is 9mm +/- 0.5 mm.
Monitors and printers vary. Please request a material sample to verify felt colors.
[email protected] turf.design 844 TURF OMG DELTA PATENT PENDING 05.19 PAGE 3
3MM FELTIn addition to the 9mm boards we can also integrate 3mm PET fabric into the products through lamination. The layered material enhances not only the acoustic performance, but allows for color combinations and color reveals.
Monitors and printers vary. Please request a material sample to verify felt colors.
R03 LIGHT GREY
R07 MARIGOLDR09 BISQUE
R28 MIDNIGHT
R19 BLUE
R11 BLACK
R22 TEAL
R01 WHITE
R02 DARK GREY
R13 PARCHMENT
R25 FLINT
R20 TAN
LAYOUTDelta’s triangular tiles can be rotated—or not—to create
unique configurations.
PAGE [email protected] turf.design 844 TURF OMG DELTA PATENT PENDING 05.19
[email protected] turf.design 844 TURF OMG DELTA PATENT PENDING 05.19 PAGE 5
TECHACOUSTICSASTM C423-17: Type A Mounting
FIRE RATINGASTM E-84 – Class A
VOCASTM D5116 Compliant
ASTM C423-17: Type A Mounting. Carved wall tile NRC varies depending on field conditions and arrangement. Contact TURF for testing details.
1.08
0.96
0.84
0.72
0.60
0.48
0.36
0.12
0.24
4000 Hz2000 Hz1000 Hz500 Hz250 Hz125 Hz
FREQUENCY
SO
UN
D A
BS
OR
BT
ION
CO
EF
FIC
IEN
T
12MM TILE: NRC = 0.359MM TILE: NRC = 0.25 18MM TILE: NRC = 0.40
DETAILSLEAD TIMEships in four (4) weeks
INSTALLATIONDelta is available with or without an adhesive backing. More information is available in the carved wall tile installation instructions.
WARRANTYthree (3) years
MAINTENANCEVacuum occasionally to remove any particulate matter and air-borne debris or dust. Compressed air can be used to dust the material in difficult to reach areas for large assemblies. Use standard household cleaners for spot cleaning.
CUSTOMDelta carved wall tiles may be customized with additional layers and colors. Contact your rep for details.
A manufacturer-applied adhesive backing is available. The pressure-activated backing instantly adheres to a variety of wall surfaces.
Carved wall tiles without an adhesive backing should be installed with a construction-grade adhesive specified by the contractor.
ADHESIVE BACKING CONSTRUCTION ADHESIVE