delta meomari 4x4 patrol vehicle · 2019. 6. 27. · vehicle length mm 5640 vehicle width mm 2350...
TRANSCRIPT
DELTA MEOMARI 4x4 PATROL VEHICLE
DIMENSIONS
Vehicle length mm 5640
Vehicle width mm 2350
Vehicle height mm 2230
1-st axle around clearance mm 320
2-d axle around clearance mm 290
Approved gross vehicle weight (GVW) kg 7000
Capacity (Crew + troops) 3+2
PERFORMANCE
Max speed on flat road surface km/h 110
Cruising range on road at 90 km/h km 500
Gap crossing (Not less) mm 600
Fording (Not less) mm 800
Straight-edged step (Not less) mm 500
Gradient (Not less) % 60
Side slope (Not less) % 30
“DELTA MEOMARI” is Armored Patrol Vehicle, a newest model in STC“DELTA”-s armored 4x4 family. Shortened platform and less weight gives thisvehicle excellent maneuverability and off-road capabilities, while carrying 5passengers, which are protected from CEN 1063 BR7+ ballistic threats andSTANAG LEVEL IIa blast under the wheels. “MEOMARI” is able to beequipped wit STC “DELTA” made Fire Control System – RWS23.
PRODUCT DESCRIPTION
PRODUCT DESCRIPTIONTECHNICAL SPECIFICATIONS
Engine type 6.7L V8 Turbo-Diesel
Power rating: 300hp , 880 Nm
Transmission 6+1 speed automatic transmission
Steering type Left hand Power Assisted Hydraulic Steering
Wheels 335/80R 20 with run-flat system
Brake system 4-wheel vented-disc ABS hydraulic assist (standard)
Chassis Type Ladder frame
Protection Level CEN 1063 BR7+ Level
DELTA RWS 23 FIRE CONTROL SYSTEM
The latest generation digital stabilizer implements new laws of armament motion control and modes of operation in digital form on the modern element base and the exchange of information between digital control units and fire control consoles on an interference-resistant standard digital interface.The armament stabilizer and the firing mechanism control unit provides:- Rapid retargeting of the gun to targets- Setup mode for loading angles- Bringing the armament and tower unit to their original position- Bypassing the vehicle’s structural zones.- Ability to aim and shot on moving target while moving itself.
The adjustment of the stabilizer parameters are performed by the operator directly from the firing control console without manipulation by adjusting elements on control units.
Information on the modes of operation and serviceability of the stabilization system is displayed on the digital display of the control panel in alphabetic and digital form.
Due to optimization of circuit-technical solutions and control laws, the instrumental composition has been reduced and the mass is reduced, in comparison with the standard solutions in the industry.
The control unit for shooting mechanisms is implemented on a modern element base, with the possibility of programming different rates of fire for each type of weapon individually. It is also possible to fire with single shots, a customizable rate of fire, fixed strings of bust. During the shooting, the number of shots fired is counted.
PRODUCT DESCRIPTION
Range of angles of guidance of the vertical guidance drive (VG) -5° - +60°
Range of angles of guidance of the horizontal guidance drive (HG) circular rotation
Power of VG and HG drives, W 1 000
Minimal guidance speed, deg/sec 0,05
Maximal change-over speed, deg/sec 45
Speed of cannon guidance during firing, deg/secAdjusted by operator,
from min. to max.
Instability of guidance speed, deg/sec <0,1
Stabilization accuracy, m/rad 2-3
Range of shoot duration adjusting, m/sec 1 - 1000
At use of the cannon 2A14 type, caliber 23 x 152 mm:
Rate of fire, shoots per minute up to 1000
Effective range of fire on terrestrial targets, m:
cartridge with APT shell
cartridge with HEI/HEIT shell
range of direct shoot of APT shell
1 500
2 000
1 000
At use of the machine-gun PKT type, caliber 7,62 x 54 mm:
Rate of fire, shoots per minuteup to 800
Combat rate of fire, shoots per minute 250
Effective range of fire, m 1 500
TECHNICAL SPECIFICATIONS
IN ADDITION
Optional features:
• Gun upgrade up to 30x133 caliber (M230LF).• Possibility of automatic aiming. The operator with a finger points to the target on
the touchscreen, and the system automatically directs the weapon and fires a shot;
• Ability to change “PCH” without combat module construction changing• Ability to complete WCS with additional modules at the request of the customer• Ability to duplicate the central processing unit to improve the reliability of the
system;• Ability to integrate the WCS with other systems of the combat vehicle• Ability to operate the system remotely via a wired, optical or wireless
communication channel;• Ability to equip with a backup battery system• The ability to be equipped with an automatic data acquisition system for
telemetry, photo and Video information about the conduct of hostilities, with the possibility of transferring Information to the command center;
• The ability to digitally process video streams from daytime cameras and a thermal imager, anti-
• Fog functions, digital image stabilization, dynamic range expansion, automatic target
• Recognition, motion detection, automatic capture and tracking of the target, and binding of photo and video data to geographic coordinates.
Advantages:
• Ergonomic and low weight.• Wide angles of targeting.• High level of target recognition and identification.• High level of accuracy and dispersion.• Increased shooting abilities in limited visibility conditions.• Direct contact between shooter and crew.• Easy integration and exploitation.
Specifications:
• High effectivity targeting system for day/night and difficult meteorological conditions.
• Ability to use weapon station for recognition and reconnaissance.
• Shooter and command/control system accommodation bellow from fire zone.
• Ability to integrate weapon system on various platforms without reducing internal capacity of vehicle.
• Ability to fast changing of weapon type.• Low silhouette