delivering the in the more contractors - hpac magazine · 2016. delivering the . most mechanical...
TRANSCRIPT
2016
Delivering the MOST mechanical professionals in the country and MORE contractors than ever before!
MEDIA PLANNERprofessional content for mechanical professionals
EXTENDING YOUR
REACHPrint
Digital
English
French
We’ve got you covered!
80 Valleybrook Drive, Toronto, ON M3B 2S9 Phone: (416) 442-5600 Fax: (416) 442-2230 www.hpacmag.com
Kerry Turner Editor 416-510-5218 [email protected]
Peter Leonard Publisher 416-510-6847 [email protected]
David Skene Associate Publisher – Sales 416-510-6884 [email protected]
Stephen Kranabetter Account Manager 416-510-6791 [email protected]
Beth McKay Assistant Editor
416-510-5215 [email protected]
Kim Rossiter Sales and Marketing Coordinator 416-510-6794 [email protected]
Mark Ryan Art Director 416-442-5600 ext 3541 [email protected]
Cheryl Fisher Production Manager 416-510-5194 [email protected]
Anita Madden Circulation Manager 416-442-5600 ext 3596 [email protected]
Annex Business Media President: Mike Fredericks
Vice President: Tim Dimopoulos
R S E SCANADA
Our readers have comments too: (from corporate research conducted May /15)
“of the three magazines I receive I get the most out of HPAC”“content is excellent”
“very instructive”“I have always liked HPAC, relevant content and good articles”
“great magazine, very informative, the industry leader, better than the rest” “the technical service articles are very important”
“a good source for honest information” “keep up the good work”
And our favourite:“HPAC is a very useful tool – almost as much as my channel lock pliers”!
Our numbers speak volumes:(stats from Aug 1/14 – July 31/15)
PRINT READERS (100% request) = 20,898Contractors = 14,879 | Specifiers = 3,323 | Wholesalers = 2,068
E-BlastsNumber of e-blasts sent = 30 | Average Open rate = 39%
WEB
Website traffic =74,943Website pageviews = 204,764
Number of quarterly sales-lead generators sent = 4Number of sales leads delivered via ActionLink = 1274 (255/issue)
August 2015
PM 40065710
EMBRACING THE WIRELESS WORLD
WHAT YOU NEED TO KNOWABOUT MEDICAL MARIJUANA
www.hpacmag.com
PIPEFITTING TRADES MEET & COMPETE
ALSO INSIDE
RESIDENTIAL SPRINKLERS:Common sense and commerce
SIMPLE SOPHISTICATION:Systems offerperformance and longevity
THE PERFECTMIX
A PUBLICATION OF
SUCCESSFUL SNOW & ICE MELTINGNAVIGATING THE WIRELESS WORLD
HOW AIR BEHAVESHYDRONICS PRODUCT SHOWCASE
LESS IS MORE
How to simplify system designDistribution
Piping Strategies
Big Loads, Good BuildingStrategies to make it work
BTU METERING
WHAT IT MEANS FOR HYDRONICS
MODERNHYDRONICS AUTUMN2015
How to achieve optimum relative humidity
THE CASE FOR EEVS
HPAC05_001.v8.indd 1
15-08-11 2:11 PM
www.hpacmag.com
(twice monthly e-newsletters)
Recipients = 11,500 | Impressions = 104,383
And our writers are well-read
You can’t have exceptional reader subscription renewal rates without exceptional writers – and HPAC has just that. Our readers have come to expect the highest level of tech-nical content to assist them in maintaining their competitive edge in the market – they know who to turn to.
And we speak French too!
Our Montreal-based editorial team stays on top of Quebec’s regional projects and local news while delivering the same top-notch technical content that you’ve come to expect from HPAC.
With almost 8000 magazine readers and 4000 e-newsletter subscribers we deliver your message with maximum exposure and timely impact.
32 HPAC | MAY 2014 HPACMAG.COM
Hydronic heating has long been known for providing superior cold weather comfort. Even so, potential clients – even those who are convinced about the benefits of hydronic heating – often ask: “What
about cooling?”There is a range of solutions depending on budgets, zon-
ing preferences and the equipment used for the heating por-tion of the system. One of the lesser-known possibilities, at least at present, is using a radiant panel as a “heat ab-sorber” for sensible cooling.
LOOKING UPThe term radiant heating makes most people think about warm floors. Although it is certainly true that there are many ex-cellent applications for radiant floor heating, it is not the only type of radiant panel that can deliver comfort.
A hydronic radiant ceiling, when properly applied, serves as an excel-lent low-temperature heat emitter. Some designs, like the panel shown in Figure 1, can deliver a heat flux of 28 Btuh/ft.2 when operating at an average circuit water temperature of 110F. This makes them well suited for use with heat sources such as mod/con boilers, solar thermal collectors and heat pumps.
< RADIANT COOLING
I Need This Controller... Expanding the possibilities for radiant ceilings with a “year round” controller. BY JOHN SIEGENTHALER
Figure 1 Radiant ceiling system design
Installation of radiant ceiling system illustrated in Figure 1.
1/2" drywall3/4" foil-faced polyisocyanurate foam strips
aluminum heat transfer platetube
7/16" oriented strand board
top side insulation ceiling framing
2.5" drywall screws
48 HPAC | MAY 2014 HPACMAG.COM
The Internet of Everything (IoE) is a worldwide phe-nomenon; in fact, a research report released by Raymond James and Associates earlier this year concluded that every day at least 80 “things” con-
nect to the Internet for the first time every second. James re-ports that by 2020 the number of connecting devices will increase to 250 every second. In the last couple of years the once lowly thermostat has become a prime IoE target be-cause, we are told, many consumers want to be directly con-nected to their HVAC systems.
HVAC control manufacturers are producing lines of resi-dential thermostats that can talk to the internet, the so-called smart thermostat. Seemingly ubiquitous wireless network access means homeowners can monitor their HVAC systems from anywhere in the world. The idea is to help householders manage energy consumption by allowing al-most unlimited management opportunities. However, I noted this disclaimer published by one DIY thermostat manufac-turer: “Usage reduction and savings are not guaranteed and are contingent upon, among other factors, customers taking action on proposed opportunities for optimization.” I would argue that only a professionally designed, installed, commis-sioned and maintained system will provide not just a com-fortable home, but the energy savings consumers want.
System design is crucial, especially when you consider a document such as ASHRAE’s Standard 55, which states that “The comfort of a given individual is affected by many vari-
ables: health, age, gender, clothing, activity, and so on. None of which will be identical for all occupants, thus room condi-tions throughout the building must be provided that will sat-isfy so that the majority of occupants will feel comfortable.” While everyone knows that turning the thermostat down a few degrees at the appropriate time will save some energy, many homeowners have come to accept second-rate heating systems that waste energy during every cycle.
No heat distribution system is perfect. Striving for near perfection should be our goal; remember, providing comfort is the primary job of HVAC. Only a properly designed, properly installed, and correctly commissioned system will provide the energy savings all of us want. The day we got away from a centralized heating plant in favour of convoluted distribu-tion systems is the day comfort and efficiency died. It is ridic-ulous to me that a residence with a forced warm air heating system might require a mini split in the second floor master bedroom to overcome a massive temperature difference be-tween the first and second floor. Even a thermostat with the brain of Watson the supercomputer cannot be expected to save energy in such a situation, of which there are many. In a near perfect situation, room occupants will not be aware of equipment noise, heat level or air motion.
Thus, assuming the residential building was designed with a focus on an efficient central heating system, then it is a great candidate for wireless automated technology.
A very successful man who made his fortune in the smart
< AUTOMATION
New Technology Enters The Residential Mix Are you ready for home automation and its implications
for your business? BY IAN MCTEER
Phot
o: Is
tock
phot
o
< PLUMBING
RFS: Trials, Trends and TribulationsAn update on the status of residential fi re sprinkler
fi re systems in Canada. BY MARK EVANS
72 HPAC | MARCH 2013 HPACMAG.COMHPACMAG.COM
The number of NFPA-13D compliant Residential Fire Sprinkler (RFS) systems being installed in single fam-ily homes in Canada is on the rise due to a growth in the number of jurisdictions that have mandated com-
pulsory inclusion of RFS systems. However, up to this point mandatory requirements for RFS systems have come solely from local authorities as there are no compulsory regula-tions requiring RFS systems in any Provincial Building Code or in the National Building Code of Canada.
Established by the National Research Council of Canada (NRC), the Canadian Commission on Building and Fire Codes (CCBFC) develops and maintains Canada's six model construction and fi re codes. The Commission for-mally approves all model code documents and technical revisions prior to publication by the NRC. It receives policy advice from the Provincial/Territorial Policy Advisory Committee on Codes which is made up of representatives from the provincial and territorial ministries responsible for building, plumbing and fi re safety regulation. Changes
on a national level would be infl uenced by the position and recommendations of the CCBFC. Inclusion in the National Building and Fire Codes would be an important step forward as these are the model Codes that largely determine the requirements of Provincial and local Codes across the country.
In the CHBA Report section of the November/December 2012 issue of Home Builder Magazine, there is reference to a 2010 report commissioned by the Canadian Code Centre wherein it was determined that the “cost/benefi t equation for mandatory RFS systems was prohibitive.” According to the article, “The report came under intense criticism from some in the fi re safety community.” The article continues on to say the “A Task Group, which includes a builder (the Technical Research Committee Chair), was asked to review and comment on its fi ndings. A report is expected for the CCBFC this February.” In fact, the task group has met once by teleconference and will meet again late this month (March 2013). No date has been set for delivery of the report.
MODERN HYDRONICS WWW.HPACMAG.COMMH12 | FEBRUARY 2014
>> Snow Melting
SNOW.It is part of nature's beauty, especially in Canada. But for commercial and insti-tutional facilities, it is a
cumbersome winter guest. Building owners and facility manag-ers are well aware of the importance of proper snow removal for safe and easy access, prevention of slip and fall injuries and protection from potential lawsuits.
The conventional methods of snow removal – plowing, shov-eling, salting and sanding – can impose a great financial burden every year. The cost is not just for the labour and materials as-sociated with the removal, but also the wear and tear on the surfaces in and around the structure. Traditional snow-removal methods can even be an environmental challenge if chemicals are used that are either tracked into the building by guests or absorbed into the ground during the spring thaw.
Snow and ice melt basics.
Embedded Systems: A Radiant Concept
BEING IN CONTROLWhen it comes to controlling the system, there are several options to choose from, such as au-tomatic, semi-automatic, manual and idling.
Fully automatic system: a sensor is placed in the ground to detect when snowfall begins. The sensor sends a signal to the heat source to activate the warm liquid flow through the radi-ant tubing. Once the snowfall stops and the sensor is dry and clear from snow and ice, the sensor sends a signal to stop the water flow and shut down the system. This energy-effi-cient method of controlling a snow melt system is typically the most economical as it runs only when needed.
Semi-automatic control: a manual intervention is required to start the system, but a timer is also included that will oper-ate for a preset amount of time and then shut the system off when it times out. This could cause the system to be started
too late and when the timer stops, the system could shut off too early or too late – both undesired outcomes.
Manual control: the system turns on and off with the flip of a switch. While this is by far the most cost-effective option to install with a snow-melt system, it generally costs more to operate. The human interface requirement typically does not align with that of perfect timing to start or stop a system when com-pared to the fully automatic system.
Idling: Another option is to idle the system at a preset temperature, typically 22F to 28F (-5C
to -2C), to ensure it can ramp up quickly in the event of snow-fall. This option is often useful in critical areas that must remain snow and ice free, such as walkways or entryways to buildings. The idle option can be used with either automatic or semi-auto-matic controls.
MH2014_12-13_Miller.indd 12 14-02-07 3:31 PM
52 HpAC | april 2013 hpacmag.com
in part i of cleaniness is Next To... in HPAC's march 2013 issue (see it at www.hpacmag.com) dis-cussed the first steps in the pro-
cess of system cleanliness. part ii reviews pressure and vacuum mea-surements and outlines the steps involved in starting the evacuation pro-cess, with particular attention to the vacuum pump.
pressure MeAsureMentsevery fluid has a distinct pressure-tem-perature relationship whereby the satu-ration (boiling) temperature can be precisely determined for a given pres-sure. it becomes more complicated when discussing air pressure (in rela-tion to system evacuation) as there are several pressure scales that must be used. Figure 6 shows the pressure-temperature relationship for water, with the pressure being expressed in the various units of measurement de-scribed below.
1. PSI: The technician’s gauge mani-fold set consists of a high side gauge and low side (compound)
gauge. The high side gauge and the portion of the low side gauge at 0 or above are expressed in psig (pounds per square inch gauge). The gauge pressure reading is simply that…the pressure which the gauge is read-ing; a partial pressure which shows how far above atmospheric pres-sure the reading is. converting psig to psia (pounds per square inch ab-solute) is done by adding atmo-spheric pressure to the gauge pressure reading; 14.7 psi at sea level.
2. Inches of HG: a barometer is a de-vice used to measure atmospheric pressure. it is constructed from a glass tube, sealed at the top, open at the bottom, with the bottom sit-ting in a mercury puddle. a vacuum occupies the portion of the glass tube below the sealed top and the level of mercury in the tube. atmospheric pressure at seal level will support a column of mercury 29.92" high in the tube. This is where the term inches of mercury ("hg) comes from.
3. Inches of Vacuum: The portion of the compound gauge below 0 psig is used to express a system pressure less than atmospheric pressure. its unit of measurement is inches of hg, but is expressed as inches of vacuum. rather than being a mea-surement of pressure above abso-lute vacuum, it is a measurement of where the pressure is in relationship to 0 psig or atmospheric pressure. a reading of 10" vacuum on the com-pound gauge would indicate that the system pressure is 10" hg. below 0 psig (atmospheric pressure). The conversion between psi and inches hg is roughly 2:1; 10" hg is equiva-lent to five psi, meaning that the system pressure is approximately five psi below whatever atmospheric pressure is.
4. mm Hg./Microns: The compound gauge is only accurate down to 29" hg (at best), and should never be used to determine the system pres-sure while evacuating. The english system of measurement is not par-ticularly convenient when discussing
< ReFRigeRaTiON
cleanliness is next to…Part II-Proper procedures for insuring a contaminant free installation.
bY dAVe deMMA
60 HPAC | MAY/JUNE 2013 HPACMAG.COM
Is anyone else noticing an alarming rise in the misguided use of com-mercial type range hoods inside res-idential buildings? It has always
been a problem but I have recently taken an unusual number of calls from people asking if their already installed monster-size range hoods are going to be OK.
What do they mean by ‘OK’ I ask? I follow up in my most empathetic voice, “Do you know what happens when you try to Hoover up the inside of your home without considering the ramifi ca-tions of pressure differentials?" “Hmmm mumble mumble…pause…ah no” is what I can hear on the other end.
So once again with my soft spoken demeanour, I ask, “So now you want my advice, after you bought it and had it installed, am I right? You should have asked a professional that question be-fore you became enamoured with the manufacturer’s glossy range hood brochure.”
For those looking for a way to explain it to appliance addicts in a consumer- friendly way, tell them sticking a 1200 cfm exhaust fan into a typical residen-
tial kitchen is not like playing with a hairdryer; it is more like having a home appendectomy with the suction side of an industrial grade leaf blower. In my 40 grit opinion, the subsequent health and building problems created should rest squarely on the appliance manu-facturers and their dealers’ shoulders. We have ignorant range hood sales people supported by their just as naïve range hood marketing departments selling range hoods to “doe-eyed” con-sumers. When it comes to building sci-ence all of them put together do not know a water column from a water dispenser.
The HVAC industry needs to step up and tell these range hood vendors that when you extract way more air than you make up, you are going to create HVAC and indoor air quality problems.
Really, what these hood S & M folks (sales and marketing) need is a simple lesson: when extraction trumps make up, holes and cracks become the con-duit to contamination. Why? Because when it comes to buildings you can al-ways count on the inside wanting out,
and the outside wanting in. Just what do these hood salespeople think is go-ing to come through the cracks when you suck the insides out of a home? According to my conversation with one dealer of hoods, it is all fresh air in those cracks…comments like that give me a headache.
At a time when the federal govern-ment is spending our tax dollars on a coast-to-coast “got bad gas” campaign alerting us to the dangers of having radon – an entire appliance in-dustry is fl ogging kitchen bling that en-ables environmental contaminates like gases and particulate matter to enter structures freely.
To put this problem into perspective take a hypothetical 20' x 30' x 9' (6m x 9.14m x 2.74m) kitchen and let’s play my favourite game of, “what if?” What if that 5400 ft3 (153m3) kitchen was sealed up and the 1200 cfm (0.57m3/s) kitchen exhaust fan activated. It would only take 4.3 minutes (5400 ft3/1200cfm) to remove all the air such that the pressure would approach 0 psia (assuming the home was at sea
< HOW I SEE IT
Ignore Pressure Differentials At Your PerilThe unintended consequences of monster-size range hoods. BY ROBERT BEAN
MODERN HYDRONICS www.hpacmag.com MH24 | autuMN 2014
>> Design
I love how Mother Nature every now and again gives us a good old fashioned smack down, just to remind us who is really boss. The ice storms eastern Canada experienced this past winter are a good example, leaving hundreds of
thousands, including yours truly without heat or power. My situation was not as severe as that of many however, having a gas stove we were able to cook and make tea; our standing pilot gas fireplace took the chill off; and our good old fash-ioned chimney vented standing pilot hot water tank gave us hot showers. The situation definitely illustrated the advan-tages of older, simpler technology, and made me wish in the moment at least, that I had an old gravity radiator system in my house. Those old standing pilot millivolt boilers could op-erate without electricity, and the old radiator system could circulate without the aid of pumps simply by relying on the laws of physics, with the heated more buoyant water rising to the top of the system thereby causing the cooler water to return to the boiler creating the natural "gravity" circulation.
Now before you go pulling the circulators off your systems let me clarify, I have not become a Luddite and turned my back on technology. I am simply enjoying a moment of nostal-gia. Losing power has its benefits and brought neighbours together to help one another out, perhaps rekindling a true sense of community. Many families likely pulled out board games that had been gathering dust for too long and redis-covered the joys of a family game night. I am sure many peo-ple have some happy memories of pulling together and cop-ing during this and other blackouts, but I don’t see many
cancelling the utilities and making it a permanent lifestyle choice. Having an old technology boiler system that will still work when the power goes out is definitely desirable, but paying the higher utility bills that go along with it may not be. Unfortunately I see far too many under performing systems out there, and usually not because the technology is lacking, but because it is improperly installed, misapplied, not under-stood and/or under utilized.
In order to understand what I mean, let’s look at some of the most common errors we see and how they negatively af-fect efficiency: oversizing, short cycling, over pumping and improper piping strategies.
Oversizing of boilers continues to be an issue in our indus-try, and in the case of a boiler, bigger is not better. Burner modulation, which is a feature on over 90 per cent of the boilers I sell these days, certainly helps but it does not solve this problem altogether. If a boiler could modulate infinitely, firing once at the beginning of the heating season and never turning off until the spring, this would approach optimal effi-ciency. Multiple boiler plants, operating and modulating to-gether can most closely approximate this, but even so we must be careful not to oversize. I understand nobody wants to be caught short but in truth I have been in this business for almost 35 years and I can count on one hand the number of jobs I have seen where the boiler plant was undersized. An accurate heat loss and properly sized boiler plant is the first step to a truly efficient hydronic system.
The second most common problem I see is directly related
Complex Times Call For Basic Measures
SIEGENTHALER
MCTEER EVANS MILLER DEMMA
BEAN
GOLDIE
All HPAC and PCC digital
products are CASL compliant
pccmag.ca
CyberBulletin (twice monthly e-newsletters)
E-blasts
PCC offers a full suite of Print and Digital products! With translation services available.
DES SALLES DE BAINS PRÉFABRIQUÉES AU CHUM
Des technologies qui optimisent les pompes
LE POINT SUR LES DISPOSITIFS ANTIREFOULEMENT
DES PLANCHERS RAYONNANTS PLUS CHAUDS
AVRIL 2015CONSULTEZ CE NUMÉRO ET LES ARCHIVES DE PCC AU PCCMAG.CAPP 40069240
PRÉSENTÉ PAR
Voyez grandjuste
L’ABC des moteurs électriques
MCEE 2015Spécia l
* Previous Show & Tell adsShow & Tell bonus space available for all ad sizes.
Bonus Space - Show & TellOnce a year we provide our clients with the opportunity to “tell their story” and “double their ad space” with HPAC’s long-standing Show & Tell feature. You write it, we print it! In 2016 Show & Tell will be included in our March CMPX trade show issue providing you with bonus space and bonus distribution at Canada’s largest mechanical trade show.
You can also take advantage of Show & Tell in our French-language magazine PCC – translation included!
2016 - the year of the trade show in CanadaWith no less than 4 major trade shows taking place in 2016 we expect you’ll be busy! Let us help maximize your reach. Only HPAC can provide you with bonus distribution at all four events.
CMPX — Canada’s largest mechanical event takes place in March in Toronto and HPAC will feature our long-standing, beloved Show & Tell bonus space opportunity (see below).
MEET — Atlantic Canada’s premier event takes place in May.
CIPHEX West — This year’s western Canada event takes place in November in Vancouver B.C.
Construct Canada — Toronto hosts this huge
trade show catering to residential and commercial contractors and engineers. Taking place in December, it’s a great way to end your year.
@
Do your best work.
HPAC02_22-27_Siggy.indd 25 15-03-11 9:04 AM
24 HPAC | MARCH 2015 HPACMAG.COM
TAC
OP
RE
SE
NTE
D B
Y
WWW.TACO-HVAC.COM
Taco’s new complete line of Variable Speed, ECM High-Efficiency Circulators
Taco is a leader in advanced equipment for leading-edge commercial and residential hydronic systems. We offer the most comprehensive selection of hydronic system components available from a single supplier.
As the Hydronic System Experts, Taco understands the key role high-efficiency circulators play in the overall success of any system.
The Viridian® - VR1816 is an infinitely variable speed, permanent magnet ECM motor, wet rotor circulator. It uses up to 85% less power - with the highest pump efficiency in its class. The infinitely variable speed settings allow fine tuning of the flow for any system. Plus, like all Taco components, it’s user-friendly, simple to install and operate.
The Viridian® - VT2218 is a temperature-sensing, variable speed, wet rotor circulator. Its high-efficiency permanent magnet ECM motor uses up to 85% less power than conventional pumps. Operating modes include Delta-T, 4 fixed speeds, set-point heat, set-point cool and boiler protection. Delta-T operation maximizes both system efficiency and comfort. This high-tech unit offers a variety of solutions, yet is easy to install and program.
The Viridian® - VR3452 is a high-efficiency wet rotor circulator for chilled and hot water applications. The permanent magnet ECM motor saves up to 80% of electrical power over conventional pumps. Variable speed settings are easily accomplished on the user-friendly interface. The optional Communication module enables Ethernet communication, Modbus RTU communication, Analog Control input 0 - 10 V,
3 analog inputs/outputs, 1 relay output, Main, Standby, Parallel Pump Operation. Operations include the default Auto Mode, Proportional pressure, constant pressure or constant speed, plus night setback turndown. This circulator features excellent energy savings, easy handling and installation, plus ‘plug and play’ set-up.
The Viridian® - VR Series high-efficiency wet rotor commercial circulator for chilled and hot water applications. Their permanent magnet ECM motors consume up to 80% less electrical power than conventional pumps. Full variable speed control delivers optimum performance and cost savings. Plus, Taco Viridian is web-enabled. All settings and pump access can be done over an internet connection, making installation, set-up and service easy.
Do your best work.
HPAC02_22-27_Siggy.indd 24 15-03-11 9:04 AMMARCH 2015 | HPAC 45HPACMAG.COM
BA
CH
AR
AC
H
WWW.MYBACHARACH.COM
PR
ES
EN
TED
BY
NEW! ECO-2020™ Refrigerant Recovery UnitThe all-new ECO-2020™ is a compact, high-quality refrigerant recovery machine capable of handling the toughest demands from residential and light-commercial contractors. The fastest AHRI-certified unit in its class, its powerful twin-cylinder (1 HP) fan-cooled, oilless compressor efficiently and quietly recovers all CFC, HFC and HCFC non-flammable refrigerants at industry-leading speeds while preventing pollutants from escaping into the environment.
A unique integrated purge function minimizes loss of refrigerant and mitigates the risk of cross contamination and its replaceable in-line filter prevents contaminants from entering the unit. The ECO-2020™ features single-knob operation, built-in 80% shut-off/overfill capability and a rugged new lightweight design with enhanced protection for gauges and connections.
• Recovers all Category II, IV and V non-flammable refrigerants• Fastest recovery rates in its class (including R410a liquid recovery at 2.59 kg/min (5.71 lbs/min))• More powerful features at a more economical price• Durable condenser provides better heat dispersion on hot days: important for R410a
• Get a FREE contractor’s kneeling pad with each ECO-2020™ purchase to protect your knees and back!
See us at MCEE, Booth #805Montreal * April 22-23
For details go to: www.MyBacharach.com
20 Amber Street - Unit 7Markham, Ontario L3R 5P4
(905) 470-8985 | [email protected]
SEE THESE
AND MORE AT
MCEE -
BOOTH #805
ECO-2020™REFRIGERANT RECOVERY UNIT
Snifit®+CARBON MONOXIDE
PERSONAL SAFETY MONITOR
Monoxor® PlusCARBON MONOXIDE
ANALYZER
Tru Pointe® IRINFRARED REFRIGERANT
LEAK DETECTOR
Innovative New Products For Contractors
FREE GIFTWITH PURCHASE
Starts February 15 - June 30, 2015 *While supplies last.
HPAC02_42-49_MCEE.indd 45 15-03-12 9:27 AM
We’ve got you covered!
Call your rep for details on this and other CMPX show
opportunities!
Febr
uary
Mar
chM
ay
June
Augu
stOc
tobe
rDe
cem
ber
SPEC
IAL
FE
ATUR
ES
MOD
ERN
HYDR
ONIC
S CM
PX
SHOW
ISSU
E W
ITH
SHOW
& T
ELL
COOL
ING
REPO
RT
22ND
ANN
UAL
SE
RVIC
E VE
HICL
E RE
PORT
2016
-201
7
NATI
ONAL
BU
YER’
S GU
IDE
ANNU
AL
HEAT
ING
RE
PORT
TREN
DS &
TR
OUBL
ESHO
OTIN
G
HYDR
ONIC
SRa
dian
t Des
ign
Buffe
r Tan
ksCo
ntro
ls
Man
ifold
Pipi
ng
Radi
ant C
oolin
g
Valv
es, A
utom
atio
n,
Cont
rols
Mar
ketin
g
Boile
rs
Pres
sure
Tes
ting
Pum
ps
PLUM
BING
Pipe
Sup
port
s an
d Re
stra
ints
Kids
Bat
hs
Grea
se
Inte
rcep
tors
Kitc
hen
Show
case
Sprin
kler
Sys
tem
s
Dom
estic
Wat
er
Heat
ing
Pipi
ng D
esig
n
Com
mer
cial
Bat
h Sh
owca
se
Wat
er C
onse
rvat
ion
Luxu
ry B
aths
Insp
ectio
n
Fixt
ure
& Fa
ucet
s
HVAC
Air H
andl
ing
IAQ
Ve
ntila
tion
Cool
ing
Optio
nsEl
ectr
ic O
ptio
nsFu
rnac
e Tu
ne U
psCo
mm
issi
onin
g
REFR
IGER
ATIO
NRo
ofto
p Un
itsRe
frig
eran
t Upd
ates
Dehu
mid
ifica
tion
Com
pres
sors
Wal
k-In
Coo
lers
Leak
Det
ectio
n
Spac
e cl
ose:
Jan
14
Mat
eria
l clo
se: J
an 2
1Sp
ace
clos
e: F
eb 2
Mat
eria
l clo
se: F
eb 9
Spac
e cl
ose:
Apr
il 15
Mat
eria
l clo
se: A
pril
22Sp
ace
clos
e: M
ay 2
0M
ater
ial c
lose
: May
27
Spac
e cl
ose:
Jul
y 18
Mat
eria
l clo
se: J
uly
25Sp
ace
clos
e: S
ept 1
6M
ater
ial c
lose
: Sep
t 23
Spac
e cl
ose:
Nov
18
Mat
eria
l clo
se: N
ov 2
5
MAN
UFAC
TURE
RS &
WHO
LESA
LERS
OF
OVER
10,
000
HVAC
/R
AND
PLUM
BING
PROD
UCTS
IN O
NE
MUST-HAVE
SOU
RCE
Also
av
aila
ble
on
line
at
HPAC
MAG
.com
MOD
ERN
HY
DRON
ICS
2016
EDI
TION
1
feat
urin
g
Sieg
enth
aler
Bean
, Mill
er,
Gold
ie a
nd m
ore!
MOD
ERN
HY
DRON
ICS
2016
EDI
TION
2
feat
urin
g
Sieg
enth
aler
Bean
, Mill
er,
Gold
ie a
nd m
ore!
2016
Edi
tori
al C
alen
dar
prof
essi
onal
con
tent
for m
echa
nica
l pro
fess
iona
ls
Bonu
s Di
stri
butio
n:*
Mod
ern
Hydr
onic
s –
Febr
uary
issu
e
CMPX
Sho
w –
PLU
S Sh
ow &
Tel
l – M
arch
issu
e
MEE
T Sh
ow -
Mar
ch is
sue
* M
oder
n Hy
dron
ics
– A
ugus
t iss
ue
CIPH
EX W
est –
Oct
ober
issu
e
Cons
truc
t Can
ada
– O
ctob
er is
sue
* M
oder
n H
ydro
nic
s is
sues
incl
ude
bonu
s di
strib
utio
n at
ALL
maj
or tr
ade
show
s an
d
thro
ugh
sele
ct h
ydro
nics
who
lesa
lers
in
addi
tion
to o
ur r
egul
ar 2
0,00
0+ r
eade
rs
2016 Print Advertising RatesRate Card #153 | Effective December 15, 2015
Double Page Spread (16.25” X 10.75”) - Call for pricingGross Canadian dollar advertising rates For American quotes please contact your sales rep
AD SIZESPECS 4 COLOUR RATES
width depth 1X 3X 6X GOLD STAR (7X)Full Page Live Trim Bleed
7”8.125”8.375”
10”10.75”
11”
6,399 6,199 6,099 5,299
2/3 Page Vertical 4.5” 10” 5,899 5,799 5,699 5,0992/3 Page Horizontal 7” 6.5” 5,899 5,799 5,699 5,0991/2 Page Island 4.5” 7.5” 5,150 5,050 4,950 4,5501/2 Page Horizontal 7” 4.875” 4,750 4,650 4,550 4,0501/2 Page Vertical 3.375” 10” 4,750 4,650 4,550 4,0501/3 Page Horizontal 7” 3.25” 3,899 3,699 3,599 3,0991/3 Page Vertical 2.125” 10” 3,899 3,699 3,599 3,0991/3 Page Square 4.5” 4.875” 3,799 3,599 3,499 2,9991/4 Page Square 3.375” 4.875” 3,099 2,999 2,899 2,599
Print Ad SubmissionFTP site uploading information for HPAC Magazine: Follow prompts to upload your files. Please make sure that YOUR company name is on your file.
Sending Files Electronically Annex Business Media Loading Dock: http://annexnorth.loadingdock.ca
The preferred file submission is print optimized PDFbut we will accept the following file formats: PDF/X; QuarkXpress (Mac/PC); Adobe Illustrator, Photoshop or Indesign CS4 (Mac/PC)
Requirements for artworkAll fonts must be supplied or embedded in the PDF fileAll images must be supplied or embedded in the PDF file and meet print specifications (CMYK, 300 dpi)All colours used must be CMYK or GrayscaleA proof of your ad must accompany your artwork (low res PDF is fine), sent to:
Cheryl Fisher, Production Manager 416.510.5194 [email protected]
Digital Advertising Rates
This Rate Card is a summary only.
WEBSITE e-newsletter e-blast4500 unique monthly visitors16,000+ monthly pageviews
11,500 recipients 12,000 national recipients
4 times per year
Leaderboard $900/month Leaderboard $750/edition $250 cpm $600 non-print advertiser
Big Box $800/month Big Box $700/edition Regional Ratesavailable
$450 print advertiser
Video $900/month Text Ad $500/monthBanner $1500/12 months
French Products Translation Included
pccmag.ca Cyber Bulletin e-newsletter French e-blast
Big Box $400/month Leaderboard $450/month 4000 recipients
Big Box $400/month $1500