Page 1 of 1

DELHI METRO RAIL CORPORATION LTD.

Contract- CC-98

Water supply arrangement for under construction Line-8 (from Janak Puri West to Kalindi Kunj

Depot) of DMRC Project Phase-III

SUMMARY SHEET

(ADDENDUM No.-1)

S. No Tender

Document Page No.

Clause No. / Item No. Addendum / Corrigendum

Remarks

1 Volume-1, NIT 3

Clause no 1.1.3.2 A (Minimum Eligibility Criteria – Work Experience)

Minimum Eligibility Criteria of Work Experience is revised

Page 3 of NIT is replaced with Page 3R

2 Volume-6, Bill of Quantities

…… Item nos. 1 and 2 of Part-1 of BOQ.

Description of item nos. 1 and 2 of Part-1 of BOQ are modified.

Please refer Revised BOQ

3 Volume-4, Technical Specifications

…… ………… List of DMRC approved makes for

various items is enclosed.

Contract No: CC-98: Water supply arrangement for under construction Line-8 (from Janak Puri West to Kalindi Kunj Depot) of

DMRC Project Phase-III.

DMRC/CC-98/Vol-1/NIT Page 3R

1.1.3.2 Minimum Eligibility Criteria:

A. Work Experience: The tenderers will be qualified only if they have completed work(s) during

last seven years ending 31.03.2015 as given below:

(i) At least one work of value INR 20.24 crores or more of similar nature. The similar works

means laying of pressurised pipe line works for water supply having diameter greater than or

equal to 150 mm (minimum length of 15 km).

If above two works each of INR 20.24 crores has been done by the foreign partner of JV and

the work was done in the country of the foreign partner then in addition to this, the foreign

partner must have done works equal to INR 10.12 crores outside the country of the foreign

partner.

OR

(ii) At least two works each of value INR 12.65 crores or more of similar nature. The similar

works means laying of pressurised pipe line works for water supply having diameter greater

than or equal to 150 mm (total length of 15 km in these two works).

If above three works each of INR 12.65 crores has been done by the foreign partner of JV

and the work was done in the country of the foreign partner then in addition to this, the

foreign partner must have done works equal to INR 10.12 crores outside the country of the

foreign partner.

OR

(iii) At least three works each of value INR 10.12 crores or more of similar nature. The similar

works means laying of pressurised pipe line works for water supply having diameter greater

than or equal to 150 mm (total length of 15 km in these three works).

If the above work of INR 10.12 crores has been done by the foreign partner of JV and the

work was done in the country of the foreign partner then in addition to this, the foreign partner

must have done works equal to INR 10.12 crores outside the country of the foreign partner.

Notes :

The tenderer shall submit details of works executed by them in the Performa of

Appendix-17 of FOT for the works to be considered for qualification of work experience

criteria. Documentary proof such as completion certificates from client clearly indicating

the nature/scope of work, actual completion cost and actual date of completion for such

work should be submitted. The offers submitted without this documentary proof

shall not be evaluated. In case the work is executed for private client, copy of work

order, bill of quantities, bill wise details of payment received certified by C.A., T.D.S

certificates for all payments received and copy of final/last bill paid by client shall also be

submitted.

Value of successfully completed portion of any ongoing work up to 31.03.2015 will also

be considered for qualification of work experience criteria.

For completed works, value of work done shall be updated to 31.03.2015 price level

assuming 5% inflation for Indian Rupees every year and 2% for foreign currency

portions per year. The exchange rate of foreign currency shall be applicable 28 days

before the submission date of tender.

SNo ITEM NO Description Qty Unit Rates

(in figures)

Rate (in words) Amount (in figures)

1 Supplying, Laying, Jointing (welded / flanged as per site

requirement), Cutting, Testing & Commissioning of Mild Steel (MS)

Pipe, Electrically Resistant Welding (ERW), Heavy Duty (Class C)

as per IS 1239 Part 1-latest including carriage, loading, unloading,

hoisting and installation of specials such as bends, tees, reducers,

collars, tail pieces etc. as per directions of Engineer-in-charge

complete in all respects including the supporting arrangement of

pipes at 3 m c/c & whereever required as per support details

drawing

(a) 65 mm Nominal dia Pipe - minimum 4.5 mm thick 720 m

(b) 150 mm Nominal dia Pipe - minimum 5.4 mm thick 9434 m

2 Supplying, Laying, Jointing (welded / flanged as per site

requirement), Cutting, Testing & Commissioning of Mild Steel (MS)

Pipe, Electrically Resistant Welding (ERW), as per IS 3589-latest

including carriage, loading, unloading, hoisting, supply and

installation of specials such as bends, tees, reducers, collars, tail

pieces etc as per directions of Engineer-in-charge complete in all

respects ncluding the supporting arrangement of pipes at 3 m c/c &

whereever required as per support detail drawings

(a) 200 mm Nominal dia Pipe -minimum 6.0 mm thick 21222 m

(b) 250 mm Nominal dia Pipe-minimum 6.0 mm thick 7442 m

(c) 300 mm Nominal dia Pipe - minimum 6.0 mm thick 27120 m

3 Providing Superior Class First Grade Solvent Free Epoxy coating

including testing on inside of MS pipe as per specification for a

thickness of 300 (±50) microns including extra cost on account of

careful handling, touch-up material supplied by coating agency, etc.

complete.

(a) 65 mm dia Pipe 720 m

(b) 150 mm dia Pipe 9434 m

(c ) 200 mm dia Pipe 21222 m

(d) 250 mm dia Pipe 7442 m

(e) 300 mm dia Pipe 27120 m

4 Providing Superior Class First Grade Solvent Free Epoxy coating

including testing on outside of MS pipe as per specification for a

thickness of 100 (±50) microns including extra cost on account of

careful handling, touch-up material supplied by coating agency, etc.

complete.

(a) 65 mm dia Pipe 720 m

(c) 150 mm dia Pipe 9434 m

(d) 200 mm dia Pipe 21222 m

(e) 250 mm dia Pipe 7442 m

(e) 300 mm dia Pipe 27120 m

5 18.80 Disinfecting MS water mains by flushing with water containing

bleaching powder at 0.5 gms per litre of water and cleaning the

same with fresh water, operation to be repeated three times

including getting the sample of water from the disinfected main

tested in the municipal laboratory.

CONTRACT CC-98 : Water supply Arrangement for under construction Line-8 (from Janak Puri West to Kalindi Kunj depot) of Delhi Metro Project of Phase-III.

PART-1: Distribution Network to various Stations