delhi jal board govt. of nct of delhi executive...

DELHI JAL BOARD GOVT. OF NCT OF DELHI EXECUTIVE ENGINEER (E&M) WS SOUTH-II

BOOSTER PUMPING STATION (NEAR APOLLO HOSPITAL) MATHURA ROAD: NEW DELHI-110076

No.DJB/EE(E&M)WS S-II/2014-15 Date:

NIT No.17 EE/E&M(W&SS-II/(2014-15)

On behalf of DJB, EE(E&M)WS(S-II) invites online item rate tender from the eligible registered contractors with DJB, Govt./ Semi-Govt. Departments in appropriate categories manufacturer, authorized dealer, except item no.2 & 3 Item no.2 & 3 will be allowed to manufacture/their authorized dealer only. All agencies must comply with the conditions, rules & regulations and other guidelines as issued by Delhi Jal Board from time to time.

(1) Last date and time for tender download. : Dt:29.09.2014 & 12.30 PM (2) Last date and time for online submission of tender. : Dt:29.09.2014 & 01.00 PM (3) Opening of Technical Bid. : Dt:29.09.2014 & 01.30 PM (4) Date/Time opening of Financial Bid. : After the opening of technical bid

S. No.

FMS NIT No.

Name of work Estimated cost

Earnest Money (EMD)

Completion period in months

1. 21746 Renovation of various T /Well in M.B Nagar in Ward no- 203 in Badarpur Constituency Re-Invite.

I/R 5100/- 30 Days

2. 22131 Supply of 4 Sq mm cable for various T/wells of Tughlakabad Village & Harkesh Nagar Ward in Tughlakabad Constituency.

I/R 4900/- 15 Days

3. 22132 Procurement of Spares of Gain Guard Make Motor Protection Assembly for various tubewells in Okhla Constituency.

I/R 4300/- 15 Days

4. 22133 S/I/C of tube well with E&M equipment at Kali Kothi Lal Kuan in T.Bad Const. in AC-52

I/R 5000/- 30 Days

5. 22134 Renovation of Hut Type Feeder Pillar for various tubewell in Kalkaji Constituency.

I/R 5300/- 30 Days

6. 22135 Lowering & lifting of pump sets etc for various T/wells in Lal Kuan area in T.Bad Const. in AC-52.

I/R 5000/- 60 Days

7. 22136 Renovation of Dhobi Ghat and C-Block East of Kalish(new) B.P.S. In Kalkaji Constituency.

I/R 4200/- 30 Days

8. 22137 S/I/C of tube well with E&M equipment at Bijan House Chhuriya Mohalla in Tughalakabd village in T.bad Const in AC-52.

I/R 4900/- 30 Days

9. 22138 Replacement of Old G.I Pipes for various tubewells in Govind Puri Area in Kalkaji Constituency.

I/R 5900/- 30 Days

10. 22139 S/I/C of tube well with E&M equipment Block B 20 Okhla Ph-I Sanjay Camp in T.Bad Const. in AC-52

I/R 5000/- 15 Days

11. 22140 Improvement of various T/well by Replacement pf Old G.I Pipes in Sri Niwas Puri at Kalkaji Constituency.

I/R 6300/- 30 Days

12. 22141 S/I/C of tube well with E&M equipment at Sardar Mohalla in Tughlakabad village in T.bad Const in AC-52.

I/R 4900/- 30 Days

13. 22142 Renovation of Various tube wells in Govind Puri Area at Kalkaji Constituency.

I/R 5400/- 30 Days

14. 20936 Renovation of Giri Nagar B.P.Stn. in Kalkaji Constituency. Under AE-II Re-Invite

I/R 5600/- 30 Days

15. 20927 Renovation of Various tube wells in Madan Pur Khadar in Okhla Constituency. Re-Invite

I/R 5500/- 30 Days

NOTE: For electrical works, firms should have electrical license from the competent authority. The scanned copy of the same be enclosed in technical bid.

Validity of tender 90 days from the date of receipt of NIT along with all the terms & conditions is available on Delhi Govt. Web Site https://delhi.govtprocurement.delhi.gov.in Agencies may contact the office of EE(Division) for additional information/any clarification. This office is not liable to entertain for the submission of Earnest Money/other documents through courier dak or through postal service/or from any unauthorized person. Such tenders shall be rejected. Bidder shall submit the EMD amount electronically on or before the last date and time of bid submission in DJB EMD A/c No.90231010012261 at Syndicate Bank, Rani Jhansi Road, New Delhi (IFSC/RTGS Code No.SYNB0009023) though Bidder’s banker. While submitting EMD though RTGS mode (RTGS timings are: 10.00 hrs to 16.00 hrs on all working days except Saturday, (timing for Saturday are 10.00 hrs to 13.00 hrs)), bidder must mention SNT No., Name of Division, closing date & time of tender and Bidder’s Name and address in the Applicant details column in the RTGS form as shown in the example below:

Details of Applicant

a) Account No. b) Name <SNT No>, <Item No.>, < Name of division>,< closing date> & < time of tender>, <Bidder’s Name> c) Address < Bidder’s Address>

The part A- should contain scanned copy of Earnest Money and other related documents. & Eligibility Criteria:

B. Online Bid Part-B shall consists of only rates quoted in bill of Quantity. • Bidder must upload the scanned copy of RTGS customer payment confirmation along with the Bid, before

the date and time of closing of the bids. • TIN Number as issued by D Vat department, Copy of registration as contractor in eligible category, proof of

having submitted the latest D-Vat/CST returns etc. • The bidder shall submit scanned copy of an undertaking on company letter head including name of

Proprietor, office address, e-mail address and contact No. on a prescribed format that the applicant has not been Debarred/black tested as on date in any department. The date of undertaking must be after the issue of NIT.

• The bidder shall submit scanned copy of PAN card & Mended form. • The firm should have completed similar nature of work in Govt. / Semi Govt. department. For R.M.O jobs

the firm should have to fulfill the criteria as per the guidelines of Labour Welfare Department/ NHRC/ Supreme Court and should have proper registration with Deputy labour commissioner in case of having engaged more than 20 employees in such works. The Scanned copy of registration will have to be submitted along with the technical bid.

• The scanned copy of valid registration should clearly mention the name of the Department, limit and item for which the firm is registered to be incorporated in Part-A.

• It may be ensured by the bidder that all the scanned copies as uploaded are quite clear, readable, visible and comprehensive failing which the Firm may not be allowed for opening of Financial Bid.

• Firms are also asked to elaborate the clear nomenclature against the documents scanned as attached with the bid.

• Scanned copy of Partnership deed should be submitted in case of partnership firm. • Bids of Tenderer whose work are pending after completion of time of completion stipulated in work order.

not responding/attending the work in the defect liability period shall not be accepted. • Bidder shall submit scanned copy of electrical license valid in Delhi for electric works. • Tenders will be received online up to due date & time mentioned. The Part-A shall be opened on the

mentioned date for further scrutiny of the documents. Financial bid will be opened only after evaluation of Technical bids and verification of

• EMDs received from the Syndicate Bank. The EMD received as per departmental conditions against the tenders will be opened and the EMD of unsuccessful bidders will be returned through banker after completion of

all formalities. If any of the above date happens to be holiday, the next working day will be considered for all purposes. Conditional tender shall not be considered & are liable to be rejected.

• The successful bidder shall ensure that the safety measures mentioned in the contract conditions are followed strictly. In case of any accident/death, the contractor shall be liable to pay minimum compensation as provided under Workmen Compensation Act-1923. In case of failure, DJB shall have the right to make the compensation & recover the amount from the contractor. Further DJB reserves the right to debar the firm from tendering/black testing if the above condition is not adhered to by the firm/contractor.

• 100% earnest money shall be forfeited in case the firm fails to execute the C.A within stipulated period as per departmental terms and conditions or non completion of works/ supplies within the completion period as per B.O.Q.

• The firm, who did not complete any of the previous awarded work timely in this division, will not be considered.

• For any further assistance, the bidder may be advised to contact Manager/Sr. Manager, Syndicate Bank, 43, Rani Jhansi Road, New Delhi-55, Contact No.23528976.

• In case, any verifiable difficulties are noticed in transmission of EMD through RTGS, submission of EMD through physical mode can be considered after approval of competent authority.

• The Departments has all the rights to postpone/ Cancel/ Reject any Tender/ Offer without assigning any reason.

• In terms of Notification No.25/2012 Service Tax dated 20 June 2012, issued by the Department of Revenue, Ministry of Finance, Government of India, the services provided by a Contractor/Operator to DJB in context of carrying our any activity in relation to any function ordinarily entrusted to DJB is exempt form service Tax. This is, however subject to any further amendments/clarifications issued the Government of India or any decision/ruling of the Court, in this regard.

• The successful tender shall enter in to the contract agreement on non judicial stamp paper of Rs. 50/- and Sign the standard conditions.

• The firm should have successfully supply/ completed during last three years at least two similar type of work with central Govt./state Govt. costing not less than (i) two works having 60% cost.(ii) One work having 80% cost and should submit a proof of adequate experience in support of the above indicating men power and machinery to complete the works. The completion corticated should be issued by the officer not blow the rank of Executive Engineer with following details. (A) the date of completion of works. (B) Nature of work alongwith bill of quantities. (C) cost of works of done. (D) The work has been completed satisfactory. The firm will also submit the scanned copy of all above documents otherwise tenders shall be liable for rejection.

• The firm will have to fill a mandate form for EFT system in case the work is awarded. • The firm shall execute contract agreement on a non judicial stamp paper of Rs. 50/- on prescribed format and

will also sign the department terms & conditions. • Department has the right of examination/ verification of the documents submitted by the firms. • In addition to above, conditions mentioned in NIT contractor are advised to see the terms and conditions

mentioned in BQ of respective work before participation in tender bid as the same will also a part of agreement.

• In case of authorized dealer, the firm should submit the scanned copy of the latest authorization letter from the manufacture.

• The tenderer are requested to inspect the site before bidding to assess the site condition and work involved in it and may contact this office for any clarification. (Only for job works) of required.

• Incomplete & conditional tenders shall be liable for rejection without any notice/ information. • The firm shall submit the duly signed and stamped true copy of purchase documents of material procured. • If the information furnished by the applicant is found incorrect at a later stage he shall be liable to be

debarred from tendering/ taking work in DJB. • The firm shall submit all scanned copy with sign and attested by the bidder. • Any loss/damage occurred during execution of work will be borne/ make good by the contractor. • The successful firm shall submit the list of material brought at site and got it approved before use from

engineer-in-charge and shall also enclose list of old material returned to the department at the time of completion of work.

• The firm make it own arrangement for the safe custody of the material/machine/equipment etc. brought at site. Department is not responsible in any manner.

• It will be the sole discretion of the department to ask the firm to use any specific make of material from the list of makes while execution of work.

• The firm has to make its own arrangement of all tools, tackles, machinery equipment required for dismantling/ assembling/lowering/lifting etc. to carry out the work.

EE (E&M) W&S (SOUTH- II) COPY TO:

1. PA TO CEO (DJB)/ DIR.(F&A)/ CE (SOUTH)/ DY.DIR(VIG)/ SE (E&M) WS I. 2. S.A.O (E&M) WS-I/ A.A.O (E&M) WS S-II. 3. AE-I/II/JE (E&M)’s/ HEAD CLERK/ CASHIER/ D/MAN/ CASE FILE/ NIT FILE. 4. The Manager, Syndicate Bank, Rani Jhansi Road, New Delhi for deposition of earnest money through

RTGS and to confirm the receipt of EMD to the undersigned. 5. NOTICE BOARD AT B.P.S (Near Apollo hospital) & VARUNALAYA OFFICE.

EE (E&M) W&S (SOUTH-II)

NIT No. 17 Item No.1

Bill of Quantity SUBJECT: Renovation of various T /Well in M.B Nagar in Ward no- 203 in Badarpur Constituency Re-Invite. S.No. Particulars Qty. 1. S/o Double flanged G.I pipe of 50 mm dia medium class each of 3 mtrs long duly

threaded on both ends welded and fitted with G.I flange on both ends having the slot for sub cable Make:- Tata/Jindal

45 Nos.

2. S/o PVC insulated PVC sheathed flat cable with plain copper conductor having 3 core for submersible motor of 4 sq mm size (Each roll of 100 mtrs) Make:- Finolex/Grandley/Havells.

03Rolls.

3. Supply of Hut Type feeder pillar board fabricated with 50 mm x 50 mm x 6mm angle iron frame and 16 SWG MS Sheet with horizontal and vertical intermediate chamber of suitable size i.e. 1370 mm x 760 x 460 with arrangement for mounting of switch gears and electrical energy meter including painting and having following items. a) Main switch 63 Amp. TPN 415 volts. Make- Havells/L&T/Standard/cromton. b) Fully automatic star delta starter of relay range13-21 amp (7.5 HP to 15HP), 3 Phase

oil immersed type Make: Bentex/L&T/Advance/ c) Amp meter 96 mm x 96 mm square shape of (0-30) amp range. Make-AE. d) Voltmeter 96mm x 96mm square shape of (0-500) volt range Make -AE. e) Indicating Lamps (a set of 3 lamps). f) Shunt capacitor of 5 KVAR Make-Asian/Epcos. g) Selector switch for voltmeter. h) Motor Protection assembly having following facility:- 1. Earth leakage protection. 2. Phase Sequence corrector. 3. Single phasing protection. 4. Over load Protection. 5. High voltage-low voltage Protection. 6. Time delay power ON. 7. Programmable time switch (i.e. RYB phase & facility to change over from automatic to manual & vice versa for 5 HP to 15 HP. Make-Gain guard/Hi Tech. i) Complete wiring & installation of electrical accessories with required copper

conductor wire & thimbles etc.

01 Nos

4. S/o D/F C.I NRV without bypass swing type flanged ends of size 50 mm dia make:- Kirloskar /IVC

03 Nos

5. S/o Misc. items i/e rubber packing, nut bolts, bore cover, clamp, tail piece, bend etc to complete the work i/e minor civil work

03 Lot

6. Transformer Oil Make:- Savita/Power 10 Ltr 7. Lifting & lowering of sub pump set along with all allied accessories from T/wells i.e.

dismantling of column pipes by opening/cutting of nut and bolts as required, opening and re-jointing of cables. Testing commissioning of T/well after lowering as per site requirement. The work including all arrangement of man , tools & tackles such as tripod, chain pulley pipe wrench etc. at T/Wells near Samadhi wala , 'D' amarchand wala & near Vijay Bharti Public School of M.B Nagar Badarpur.

03Jobs

Terms and condition

1. Payment will be made after satisfactory completion of work. 2. Work will be completed within 30 days 3. Successful Tenderer shall execute the Contract Agreement as per the departmental approved draft on Non-Judicial Stamp Paper of Rs.50/-. 4. Old material shall be returned to the department. 5. Guarantee 06 months. 6. Firm shall be solely responsible for any accident during execution of work and no Compensation of any kind shall be payable by the DJB. 7. The firm is advised to see the site conditions before quoting the rates, if required 8. All necessary precautions will be taken by the firm before start of work and during execution of

work.



BOQ

Sub: Supply of 4 Sq mm cable for various T/wells of Tughlakabad Village & Harkesh Nagar Ward in Tughlakabad Constituency.

S.No Particulars Qty 1. Supply of 3 core PVC insulated industrial Flate cable for Sub/

Pump set size “4 Sq mm (each Roll 100 Meter.) Make: Finolex / Havells / Grandly

20 Nos.

Terms & Conditions:-

1. Payment after satisfactory supply of material at store. 2. Supply within 15 days from the date of issue of work order. 3. Any damage during transportation material will be the firm’s responsibility. 4. Guarantee period of one year.



BOQ

Sub: Procurement of Spares of Gain Guard Make Motor Protection Assembly for various tubewells in Okhla Constituency.

S.No Particulars Qty

PART-A

1 Change Over Relay 63 Amp 15 Nos

2 Over Load Relay ( Electronic ) 15 Nos

3 Electronic Delay Timer 20 Nos

4 Single Phase Protection ( PCB CARD ) 10 Nos

5 Auto Manual Switch 30 Nos

6 Programming Time Switch 15 Nos 7 Phase Sequence (PCB Card) 10 Nos

Make : - Gain Guard

Terms & Conditions:-

1. Payment after satisfactory supply of material at store. 2. Supply within 15 days from the date of issue of work order. 3. Any damage during transportation material will be the firm’s responsibility. 4. Guarantee period of Six Montha.



Bill of Quantity

Subject: - S/I/C of tube well with E&M equipment at Kali Kothi Lal Kuan in T.Bad Const. in AC-52

SNo. Particulars Qty Unit 1 S/o. Sub. P/Set for deep bore wells (high head) of 7.5 HP with dynamically balanced

motor, vibration free total enclosed motor fitted squirrel cage induction motor, water lubricated thrust bearing, fitted with S.S. impeller mounted on stainless steel shaft of following parameters having 2900 RPM, suitable for 3 phase, A.C. supply Head in meters app. – 144-82 Discharge in LPM – 95-170 Make – BS/ SU/ KSB/ /Mody/ABS.

1 No

2. Supply of hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 50mm x 50mm x6mm angle Iron Frame and 16 SWG M.S. sheet with horizontal and vertical intermediate member of suitable size with arrangement for mounting of switch gear and electrical energy meter i/c painting having following items. Main switch 63 Amp TP N, 415 Volt Make: Havells/Advance. Fully automatic star delta starter of 3 Phase oil immersed type Make – Bentex/Advance/L&T/Siemens, Ampere meter 96mmx96mm square shape of (0-30) Amp range. Make: A.E, Voltmeter of 96mm x 96 mm square shape of (0-500) volt range Make: A.E, LED Indicating lamps with fitting (a set of 3 lamps) Make:- Vaishnav/GE, shunt capacitor of 5 KVAR Make:-ABB/L&T Selector switch for Voltmeter. Make - Kaycee, Motor Protection Assembly having Earth Leakage protection Phase sequence corrector Single phasing protection Over load protection High voltage-low voltage protection. Time delay power on Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa up to 7.5 HP Make – Gain Guard/Hi-tech, Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc at site. The panel board shall be mounted on the base frame of 2 feet height made of 50x50x6mm angle iron frame.

1 No

3 S/o PVC insulated & PVC sheathed flat cable with plain copper conductor having 3 core for submersible motor of 4 sq. mm size. (Each roll of 100 mtrs.)Make:- Finolex/Havells/Grandley

3 Roll

4 S/o M.S. clamp of 600mm length duly fabricated from 12.5mm thick 75mm wide M.S. plate for holding the pipe of 50mm dia.

1 Set

5 S/o of double flange G.I. column pipe 50mm dia, medium class, each of 3mtrs Long duly threaded on both ends, welded & fitted with G.I. flange on both ends, with slot for sub cable. Make: TATA/Jindal.

40 No

6 S/o tail piece of the medium class G.I. pipe 500mm long with one end threaded as per outlet of pump & another end flanged as per size of G.I. pipe 50mm dia.

1 No

7 S/o G.I.900 x 50mm dia bend having flange at both ends (Heavy duty). 1 No 8. Supply of MS full threaded off sizes Nut bolts as per site requirement. 40 Kg 9 Supply of Rubber packing for 50mm dia flange 45 Nos 10 Supply of CI D/F non return valve of size 50mm dia PN 1.6 Make: IVC/Kirloskar 1 No 11 Supply of Transformer Oil Make:- Savita/Power 5 Ltr 12 Supply of PVC insulated (heavy duty) armored electrical cable for holding up to and

including 1100 volt with aluminum conductor of size 25 sq mm 4 core. Make:- Grandlay/ Gloster /CCI /ECKO/Kalinga

35 Mtr

13 Supply of bore cover approx size 1’x1’ made out from 6mm thick M.S. sheet in 2 halves & a circular hole in centre 2-1/2” dia with locking arrangement by Nut & bolts.

1 Set

14 Installation of t/well by lowering of sub p/set with all allied above items. This includes installation and grouting of panel board with all electrical wiring & cabling at site. All tools & tackles i/c tripod chain pulley blocks etc. shall be arranged by the firm. This includes testing & commissioning of t/well on load at site i/c cartage, loading & unloading of material. It also includes trial run of 100 hrs operation successfully by the firm. All required civil work included in the scope of work.

1 Job

Terms and Conditions: 1. Payment will be made after satisfactory completion of work. 2. Work will be completed within 30 Days. 3. Successful Tenderer shall execute the Contract Agreement as per the departmental approved draft on

Non-Judicial Stamp Paper of Rs.50/- 4. Old material shall be returned to the department. if any 5. Firm shall be solely responsible for any accident during execution of work and no Compensation of any

kind shall be payable by the DJB. 6. The firm is advised to see the site conditions before quoting the rates, if required. 7. All necessary precautions will be taken by the firm before start of work and during execution of work. 8. Guarantee period for the work is one year from the date of commissioning. During guarantee period, if

the t/well goes out of order for any reason, then the firm shall make it functional including taking out & lowering of sub p/set at his own expenses. The department shall not pay anything on account of this, if the pump goes out of order, then the firm is bound to make the pump set functional within 15 days from the information given to be firm telephonically / issue of letter.

9. The department will take over the site from the firm after successful completion of trail run of 100 hour. During trial run the firm is fully responsible for the site and installation.

10. The contract is a turn key work complete in all respect which includes supply, installation testing & commissioning of all above electrical mechanical & all other required material . consumable tools & tackles etc, required to complete the work including labour & workmanship, Nothing extra shall be paid to the firm, if any extra item is executed for commissioning of the t/well.

11. Test certificate of sub p/set shall be submitted. 12. Before installation / execution of work at site, the firm will supply all the material at concerned JE (store)

as per specification of work order.



BILL OF QUANTITY

Subject:- Renovation of Hut Type Feeder Pillar for various tubewell in Kalkaji Constituency.

S.No Particulars Qty PART-A

Renovation Hut type feeder pillar of various tube wells by replacement of following defective accessories.

1 Main switch TPN of capacity 63 Amp , 3 Phase with neutal link rewirable fuse units. Make:- Havells / Capital

10 Nos.

2 Motor protection assembly having earth leakage protection, phase sq corrector , single phasing protection. Time delay power on, programmable time switch i e RYB phase & facility to change over from automatic to Manuel & vice up to change 10 HP. Make:- Gain guard / Hi tech/ITC complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling at site the panel board shall be mounted on the base frame of 2 feet height made out of 50mm x 50mm x 6 mm angle iron frame.

6 Nos.

3 Amp Meter (0-30) Ampere, 96mm x96 mm. Make:- AE 10 Nos.

4 Volt Meter (0-500) Volts, 96mm x96 mm. Make:- AE 10 Nos. 5 Shunt Capacitor 5 KVR Make:-Epcos / Asian 10 Nos.

6 Hut Type MS Box for electrical pillar of size 50 mm X 50mm X 6 mm angle from iron frame and 16 SWG MS sheet with horizontal & Vertical intermediate member of suitable size 1370 mmX760mmX460mm with arrangement for mounting of switch gear & electrical energy meter

4 Nos.

PART-B 1 Labour charges in respect of dismentaling the above said defective parts and

fitted new spares / items in place of them . Job i/c also making proper Connection in all electrical equipments and testing on full load (For 10 Nos. Feeder Pillar)

4 Job

Terms and Conditions: 1. Payment will be made after satisfactory completion of work. 2. Work will be completed within 30 days 3. Successful Tenderer shall execute the Contract Agreement as per the departmental approved draft on Non-Judicial Stamp Paper of Rs.50/-. 4. Old material shall be returned to the department. 5. Guarantee 06 months. 6. Firm shall be solely responsible for any accident during execution of work and no Compensation of any kind shall be payable by the DJB. 7. All necessary precautions will be taken by the firm before start of work and during execution of

work.



BILL OF QUANTITY

Subject:- Lowering & lifting of pump sets etc for various T/wells in Lal Kuan area in T.Bad Const. in AC-52.

S. No.

Particular’s

Quantity

11.. Lifting & lowering of sub pump set along with all allied accessories from T/wells i.c dismantling of column pipes by opening/cutting of nut bolts opening & Re jointing of cables, testing commissioning of T well as per requirements upto depth of bore & above 250 ft. Including hiring and transportation of chain pulley block, tripot stand and other tools and tackles etc required for work

30 Nos.

Terms & Conditions

1. Payment: after satisfactory completion of work 2. The work will be completed within 60 days or sooner as per requirement at site. 3. All necessary precautions will be taken by the firm before start of work and during

execution of work. 4. Firm shall be solely responsible for any accident during execution of work and no

compensation of any kind shall be payable by the DJB. 5. The firm will deploy the staff immediately as per direction of Engineer in charge failing

which a penalty of Rs. 1000.00 per instants will be levied. 6. Old material, if any, will be deposited in store. 7. Any loss due to theft/ damage etc. during execution of work shall be borne by the firm. 8. The contractor shall be responsible for watch & ward of the material during execution of

work.



BILL OF QUANTITY

Sub: Renovation of Dhobi Ghat and C-Block East of Kalish(new) B.P.S. In Kalkaji Constituency.

S.N. PARTICULARS QTY

1. S/O CI, D/F non rising spindle sluice valve PN 1.0 1514846 CI Body/wedge/bronze rings 8S410 shaft construction and SSIS6603 gr12, cr12 in ISI marked of 100 mm dia.

Make: Kirlosker/ I.V.C.

1 NOS

2. S/O CI, D/F non rising spindle sluice valve PN 1.0 1514846 CI Body/wedge/bronze rings 8S410 shaft construction and SSIS6603 gr12, cr12 in ISI marked of 150 mm dia.


2 NOS

3. S/O CI, swing type non return valve as per IS 5312(part 1&2) PN 1.6 CI body wedge bronze to rubber ring/SS410 shaft hing pin construction of 100 mm dia .


2 NOS

4. Dismantling the existing 5 Nos sluice valve/ non return valve from pipe line after opening/cutting the nut-bolts with the gas cutter as per site requirement and installation of new 5Nos sluice valve/ non return valve on pipe line with all accessories like nut-bolts, washer, packing sheet etc as per site requirement.

1 job

5. MS Base frame: supply and fixing of base frame made out of 650X125X65 mm C-section heavy duty i/c dismantling of CC foundation and recasting the new CC foundation.

2 Job

6. S/O P.V.C. Water tank of capacity 500 ltrs.

Make: Sintex/ Vectus/Pollywell

2 nos

7. S/O GI Pipe 3 mtr long B- Class 40 mm dia.

Make: Jindal/ Tata 10 nos

8. S/O GI Tank nipple 40 mm dia.

Make: Unik/ R-Brand 2 nos

9. S/O GI nipple 40 mm dia.


10. S/O GI Elbow 40 mm dia.


11. S/O GI Tee 40 mm dia.


12. S/O GI Union 40 mm dia.


13. S/O GI Socket 40 mm dia.


14. S/O GM Gate valve 40 mm dia.

Make : Sant/ Leader

4 nos

15. Dismantling and Fixing of item no 6 to 14 with the help of pipe wrinch and other required tools &tackles, cutting &threading of pipe as per site requirement.

2 jobs

Terms and Conditions: 1. Payment will be made after satisfactory completion of work. 2. Work will be completed within 30 days 3. Successful Tenderer shall execute the Contract Agreement as per the departmental approved draft on Non-Judicial Stamp Paper of Rs.50/-. 4. Old material shall be retained by the firm. 5. Guarantee 06 months. 6. Firm shall be solely responsible for any accident during execution of work and no Compensation of any kind shall be payable by the DJB. 7. All necessary precautions will be taken by the firm before start of work and during execution of

work. 8. All Govt Taxes should be mentioned clearly, if any.



Bill of Quantity

Subject: - S/I/C of tube well with E&M equipment at Bijan House Chhuriya Mohalla in Tughalakabd village in T.bad Const in AC-52.

SNo. Particulars Qty Unit 1 S/o. Sub. P/Set for deep bore wells (high head) of 7.5 HP with dynamically balanced motor,

vibration free total enclosed motor fitted squirrel cage induction motor, water lubricated thrust bearing, fitted with S.S. impeller mounted on stainless steel shaft of following parameters having 2900 RPM, suitable for 3 phase, A.C. supply Head in meters app. – 144-82 Discharge in LPM – 95-170 Make – BS/ SU/ KSB/ /Mody/ABS.

1 No

2. Supply of hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 50mm x 50mm x6mm angle Iron Frame and 16 SWG M.S. sheet with horizontal and vertical intermediate member of suitable size with arrangement for mounting of switch gear and electrical energy meter i/c painting having following items. Main switch 63 Amp TP N, 415 Volt Make: Havells/Advance. Fully automatic star delta starter of 3 Phase oil immersed type Make – Bentex/Advance/L&T/Siemens, Ampere meter 96mmx96mm square shape of 0-30 Amp range. Make: A.E, Voltmeter of 96mm x 96 mm square shape of 0-500 volt range Make: A.E, LED Indicating lamps with fitting (a set of 3 lamps) Make:- Vaishnav/GE, shunt capacitor of 5 KVAR Make:-ABB/L&T Selector switch for Voltmeter. Make - Kaycee, Motor Protection Assembly having Earth Leakage protection Phase sequence corrector Single phasing protection Over load protection High voltage-low voltage protection. Time delay power on Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa up to 7.5 HP Make – Gain Guard/Hi-tech, Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc at site. The panel board shall be mounted on the base frame of 2 feet height made of 50x50x6mm angle iron frame.

1 No


3 Roll


1 Set


38 No


1 No

7 S/o G.I.900 x 50mm dia bend having flange at both ends (Heavy duty). 1 No 8. Supply of MS full threaded off sizes Nut bolts as per site requirement. 30 Kg 9 Supply of Rubber packing for 50mm dia flange 45 Nos 10 Supply of CI D/F non return valve of size 50mm dia PN 1.6 Make: IVC/Kirloskar 1 No 11 Supply of Transformer Oil Make:- Savita/Power 5 Ltr 12 Supply of PVC insulated (heavy duty) armored electrical cable for holding up to and including

1100 volt with aluminum conductor of size 25 sq mm 4 core. Make:- Grandlay/ Gloster /CCI /ECKO/Kalinga

38 Mtr


1 Set


1 Job

Terms and Conditions: 1. Payment shall be made after successful trial run of 100 hours by the firm. & deducted security shall be

released after successful completion of guarantee. 2. Guarantee period for the work is one year from the date of commissioning. During guarantee period, if the

t/well goes out of order for any reason, then the firm shall make it functional immediately including taking out & lowering of sub p/set at his own expenses. The department shall not pay anything on account of this. If the pump goes out of order, then the firm is bound to make the pump set functional within 15 days from the information given to the firm telephonically/issue of letter. During this period of repair of pump set, alternative/service sub p/set shall be installed at site by the firm to ensure smooth water supply in the area.

3. The department will take over the site from the firm after successful completion of trial run of 100hour. During trial run, the firm is fully responsible for the site and installation.

4. The contract work is a turn key work complete in all respect which includes supply, installation, testing & commissioning of all above electrical, mechanical & all other required material, consumables, tools & tackles etc, required to complete the work including labour & workmanship. Nothing extra shall be paid to the firm, if any extra item is executed for commissioning of the t/well.

5. Completion period 30 days from the date of taking over the site from civil division. 6. Test certificate & guarantee of sub p/set shall be submitted. 7. Before installation/execution of work at site, the firm will supply all the material at concerned JE (Store) as

per specification of work order. 8. The firm will take all necessary precaution for safety of equipment and labour as per NHRC guidelines. 9. Firm shall be solely responsible for any accident during execution of work and no compensation of any kind

shall be payable by the DJB. 10. Successful tenderer shall execute the Contract Agreement as per the departmental approved draft on Non-

judicial Stamp Paper of Rs. 50/- immediately. 11. The firm is advice to see the site conditions before quoting the rates. For joint inspection at site, the firm may

contact this office.

EE (E&M) W&S S- II


BOQ

Sub: Replacement of Old G.I Pipes for various tubewells in Govind Puri Area in Kalkaji Constituency.


1 PART - A a) S/o of double flange G.I. pipe 50 mm dia medium class each of 3 mtrs long

duly threaded on both end. Welded & fitted with G.I. Flange on both sides with slot for sub cable. Make Tata /Jindal

95 Nos

b) Miscellaneous Items such as Nut Bolt, Washers & Rubber Packing etc. 10 Jobs PART – B

1 Replacement of above G.I pipes by dismantling of Sub. Pump set along with G.I. pipe and Sub Cable from 300 to 400 feet deep bore well after untightened / cutting of nut bolts and adjoining cable joints of 3core sub cable and lowering the repaired / new sub pump set, sub.cable and G.I. pipe of required length , making new electrical joints in motor & strater etc as per requirement with water proof steel grip PVC tapes. Making the G.I. bend connection in service line, job includes the arrangement of men and tools & tackels such as tripod stand , chain pulley block , pipe wrench, chain wrenech, different types & sizes spanners etc as per site requirement and cartage to & fro etc. Complete job up to full satisfaction of Engineer-IN-charge

10 Jobs


work.



Bill of Quantity

Subject: - S/I/C of tube well with E&M equipment Block B 20 Okhla Ph-I Sanjay Camp in T.Bad Const. in AC-52

SNo. Particulars Qty Unit 1 S/o. Sub. P/Set for deep bore wells (high head) of 7.5 HP with dynamically balanced

motor, vibration free total enclosed motor fitted squirrel cage induction motor, water lubricated thrust bearing, fitted with S.S. impeller mounted on stainless steel shaft of following parameters having 2900 RPM, suitable for 3 phase, A.C. supply Head in meters app. – 144-82 Discharge in LPM – 95-170 Make – BS/ SU/ KSB/ /Mody/ABS.

1 No

2. Supply of hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 50mm x 50mm x6mm angle Iron Frame and 16 SWG M.S. sheet with horizontal and vertical intermediate member of suitable size with arrangement for mounting of switch gear and electrical energy meter i/c painting having following items. Main switch 63 Amp TP N, 415 Volt Make: Havells/Advance. Fully automatic star delta starter of 3 Phase oil immersed type Make – Bentex/Advance/L&T/Siemens, Ampere meter 96mmx96mm square shape of (0-30) Amp range. Make: A.E, Voltmeter of 96mm x 96 mm square shape of (0-500) volt range Make: A.E, LED Indicating lamps with fitting (a set of 3 lamps) Make:- Vaishnav/GE, shunt capacitor of 5 KVAR Make:-ABB/L&T Selector switch for Voltmeter. Make - Kaycee, Motor Protection Assembly having Earth Leakage protection Phase sequence corrector Single phasing protection Over load protection High voltage-low voltage protection. Time delay power on Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa up to 7.5 HP Make – Gain Guard/Hi-tech, Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc at site. The panel board shall be mounted on the base frame of 2 feet height made of 50x50x6mm angle iron frame.

1 No


3 Roll


1 Set


40 No


1 No

7 S/o G.I.900 x 50mm dia bend having flange at both ends (Heavy duty). 1 No 8. Supply of MS full threaded off sizes Nut bolts as per site requirement. 40 Kg 9 Supply of Rubber packing for 50mm dia flange 45 Nos 10 Supply of CI D/F non return valve of size 50mm dia PN 1.6 Make: IVC/Kirloskar 1 No 11 Supply of Transformer Oil Make:- Savita/Power 5 Ltr 12 Supply of PVC insulated (heavy duty) armored electrical cable for holding up to and

including 1100 volt with aluminum conductor of size 25 sq mm 4 core. Make:- Grandlay/ Gloster /CCI /ECKO/Kalinga

35 Mtr


1 Set


1 Job

Terms and Conditions: 1. Payment will be made after satisfactory completion of work. 2. Work will be completed within 30 Days. 3. Successful Tenderer shall execute the Contract Agreement as per the departmental approved draft on

Non-Judicial Stamp Paper of Rs.50/- 4. Old material shall be returned to the department. if any 5. Firm shall be solely responsible for any accident during execution of work and no Compensation of any

kind shall be payable by the DJB. 6. The firm is advised to see the site conditions before quoting the rates, if required. 7. All necessary precautions will be taken by the firm before start of work and during execution of work. 8. Guarantee period for the work is one year from the date of commissioning. During guarantee period, if

the t/well goes out of order for any reason, then the firm shall make it functional including taking out & lowering of sub p/set at his own expenses. The department shall not pay anything on account of this, if the pump goes out of order, then the firm is bound to make the pump set functional within 15 days from the information given to be firm telephonically / issue of letter.

9. The department will take over the site from the firm after successful completion of trail run of 100 hour. During trial run the firm is fully responsible for the site and installation.

10. The contract is a turn key work complete in all respect which includes supply, installation testing & commissioning of all above electrical mechanical & all other required material . consumable tools & tackles etc, required to complete the work including labour & workmanship, Nothing extra shall be paid to the firm, if any extra item is executed for commissioning of the t/well.

11. Test certificate of sub p/set shall be submitted. 12. Before installation / execution of work at site, the firm will supply all the material at concerned JE (store)

as per specification of work order.



BILL OF QUANTITY

Subject:- Improvement of various T/well by Replacement pf Old G.I Pipes in Sri Niwas Puri at Kalkaji Constituency.


1 PART - A

a) S/o of double flange G.I. pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both end. Welded & fitted with G.I. Flange on both sides with slot for sub cable. Make Tata /Jindal

105 Nos.

b) Miscellaneous Items such as Nut Bolt, Washers & Rubber Packing etc. 10 Job PART - B 1 Replacement of above G.I pipes by dismantling of Sub. Pump set along with

G.I. pipe and Sub Cable from 300 to 400 feet deep bore well after untightened / cutting of nut bolts and adjoining cable joints of 3core sub cable and lowering the repaired / new sub pump set, sub. cable and G.I. pipe of required length , making new electrical joints in motor & starter etc as per requirement with water proof steel grip PVC tapes. Making the G.I. bend connection in service line, job includes the arrangement of men and tools & tackles such as tripod stand , chain pulley block , pipe wrench, chain wrenech, different types & sizes spanners etc as per site requirement and cartage to & fro etc. Complete job up to full satisfaction of Engineer-IN-charge

10 Jobs


work.



Bill of Quantity

Subject: - S/I/C of tube well with E&M equipment at Sardar Mohalla in Tughlakabad village in T.bad Const in AC-52.

SNo. Particulars Qty Unit 1 S/o. Sub. P/Set for deep bore wells (high head) of 7.5 HP with dynamically balanced motor,

vibration free total enclosed motor fitted squirrel cage induction motor, water lubricated thrust bearing, fitted with S.S. impeller mounted on stainless steel shaft of following parameters having 2900 RPM, suitable for 3 phase, A.C. supply Head in meters app. – 144-82 Discharge in LPM – 95-170 Make – BS/ SU/ KSB/ /Mody/ABS.

1 No

2. Supply of hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 50mm x 50mm x6mm angle Iron Frame and 16 SWG M.S. sheet with horizontal and vertical intermediate member of suitable size with arrangement for mounting of switch gear and electrical energy meter i/c painting having following items. Main switch 63 Amp TP N, 415 Volt Make: Havells/Advance. Fully automatic star delta starter of 3 Phase oil immersed type Make – Bentex/Advance/L&T/Siemens, Ampere meter 96mmx96mm square shape of 0-30 Amp range. Make: A.E, Voltmeter of 96mm x 96 mm square shape of 0-500 volt range Make: A.E, LED Indicating lamps with fitting (a set of 3 lamps) Make:- Vaishnav/GE, shunt capacitor of 5 KVAR Make:-ABB/L&T Selector switch for Voltmeter. Make - Kaycee, Motor Protection Assembly having Earth Leakage protection Phase sequence corrector Single phasing protection Over load protection High voltage-low voltage protection. Time delay power on Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa up to 7.5 HP Make – Gain Guard/Hi-tech, Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc at site. The panel board shall be mounted on the base frame of 2 feet height made of 50x50x6mm angle iron frame.

1 No


3 Roll


1 Set


37 No


1 No

7 S/o G.I.900 x 50mm dia bend having flange at both ends (Heavy duty). 1 No 8. Supply of MS full threaded off sizes Nut bolts as per site requirement. 30 Kg 9 Supply of Rubber packing for 50mm dia flange 40 Nos 10 Supply of CI D/F non return valve of size 50mm dia PN 1.6 Make: IVC/Kirloskar 1 No 11 Supply of Transformer Oil Make:- Savita/Power 5 Ltr 12 Supply of PVC insulated (heavy duty) armored electrical cable for holding up to and including

1100 volt with aluminum conductor of size 25 sq mm 4 core. Make:- Grandlay/ Gloster /CCI /ECKO/Kalinga

36 Mtr


1 Set


1 Job

Terms and Conditions: 1. Payment shall be made after successful trial run of 100 hours by the firm. & deducted security shall be

released after successful completion of guarantee. 2. Guarantee period for the work is one year from the date of commissioning. During guarantee period, if the

t/well goes out of order for any reason, then the firm shall make it functional immediately including taking out & lowering of sub p/set at his own expenses. The department shall not pay anything on account of this. If the pump goes out of order, then the firm is bound to make the pump set functional within 15 days from the information given to the firm telephonically/issue of letter. During this period of repair of pump set, alternative/service sub p/set shall be installed at site by the firm to ensure smooth water supply in the area.

3. The department will take over the site from the firm after successful completion of trial run of 100hour. During trial run, the firm is fully responsible for the site and installation.

4. The contract work is a turn key work complete in all respect which includes supply, installation, testing & commissioning of all above electrical, mechanical & all other required material, consumables, tools & tackles etc, required to complete the work including labour & workmanship. Nothing extra shall be paid to the firm, if any extra item is executed for commissioning of the t/well.

5. Completion period 30 days from the date of taking over the site from civil division. 6. Test certificate & guarantee of sub p/set shall be submitted. 7. Before installation/execution of work at site, the firm will supply all the material at concerned JE (Store) as

per specification of work order. 8. The firm will take all necessary precaution for safety of equipment and labour as per NHRC guidelines. 9. Firm shall be solely responsible for any accident during execution of work and no compensation of any kind

shall be payable by the DJB. 10. Successful tenderer shall execute the Contract Agreement as per the departmental approved draft on Non-

judicial Stamp Paper of Rs. 50/- immediately. 11. The firm is advice to see the site conditions before quoting the rates. For joint inspection at site, the firm may

contact this office.

EE (E&M) W&S S- II


BILL OF QUANTITY

Subject:-Renovation of Various tube wells in Govind Puri Area at Kalkaji Constituency.

S.NO. Particular's Qty

1. S/o PVC insulated & PVC sheathed flat cable with plain copper conductor having 3 core for submersible motor of 4 sq.mm size, roll of 100 mtrs. Make:- Finolex/Kalinga/Havells/Grandlay.

3 Rolls

2. S/o of double flange G.I. Column pipe 50mm dia, medium class, each of 3mtrs long duly threaded on both ends, welded & fitted with G.I flange on both ends, with slot for sub cable. M ake:- TATA/Jindal.

38 Nos.

3. S/o Misc items i/e rubber packing, nut bolts, bore cover, clamp, tail piece, bend etc to complete the work i/e minor civil work.

3 Lots

4. Supply of hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 50mm x 50mm x 6mm angle iron frame and 16 SWG M.S sheet with horizontal and vertical intermediate member of suitable size with arrangement for moun ting of switch gear and electrical energy meter i/c painting having following items. Main switch 63 amp TP N, 415 volt Make: Havells/Advance. Fully automatic star delta starter of 3 phase oil immersed type Make- Bentex, advance L&T set. Ampere meter 96mm x 96mm square shape of (0-30) Amp range. Make:- A.E voltmeter of 96mm x 96mm square shape of (0-500) volt range. Make:- A.E LED indicating lamps with fitting ( a set of 3 lamps). Make:- Vaishnav/GE, shunt capicator of 5 KVAR Make:- ABB/L&T Selector switch for voltmeter. Make:- Kaycee, motor protection assembly having earth leakage protection phase sequence corrector single phasing protection over load protection high voltage-low voltage protection. Time delay power on programmable time switch (i.e RYB phase & facility to change over from automatic to manual & vice versa upto 7.5 HP M ake – Gain Guard/ Hi tech, complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc at site. The panel board shall be mounted on the base of frame of 2 feet height made of 50mm x 50mm x 6mm angle iron frame.

2 Nos

5. Transformer oil Make:- Savita/Powers. 12 Ltr.

6. Lifting and lowering of sub. P/set along with all allied accessories from tube wells i.c. Dismantling of of pipes by opening/ cutting of nut-bolts opening and rejointing of cables , testing, commissiong of tube wells as per requiremnts up to depth of bore . Including hiring and tronsportation of chain pulliy block, tripod stand and other tools and tackles etc required for work of tube wells Transit Camp T/well No.4 B-48 Transit Camp T/well No.1 B-48 and Transit Camp T/well No.2

3 Jobs

Terms and Conditions: 1. Payment will be made after satisfactory completion of work. 2. Work will be completed within 30 days 3. Successful Tenderer shall execute the Contract Agreement as per the departmental approved draft on Non-Judicial Stamp Paper of Rs.50/-. 4. Old material shall be returned to the department, if any 5. Guarantee 06 months. 6. Firm shall be solely responsible for any accident during execution of work and no Compensation of any kind shall be payable by the DJB. 7. All necessary precautions will be taken by the firm before start of work and during execution of

work.


NIT No. 17 Item No.14 BOQ

Sub: Renovation of Giri Nagar B.P.Stn. in Kalkaji Constituency. Under AE-II Re-Invite S.No Particulars Qty 1. Dismantling the existing sluice valve and Non return valve from pipe line after

opening/ cutting the nut-bolts with gas cutter as per site requirement. 5 Jobs

2. S/o CI, Df non rising Spindle sluice valve PN. 1.01514846 CI body / wedge/ bronze rings 8S410 Shaft construction and SSIS6603 cr 12, cr 12 in ISI marked of 200 mm dia Make:-Kirloskar / IVC

3 Nos.

3. S/o CI, swing type non- return valve as per IS 5312 (Part 1 & 2) PN 1.6 CI body wedge bronze to rubber ring / ss410 shaft hing pin construction of 200 mm dia. Make:- Kirloskar / I.V.C.

2 Nos.

4. Installation of new sluice valve and non return valve on pipe line with all accessories like nut- bolts, washer, packing sheet etc as per site requirement and testing on load.

5 Jobs

Terms and Conditions: 1. Payment will be made after satisfactory completion of work. 2. Work will be completed within 30 days 3. Successful Tenderer shall execute the Contract Agreement as per the departmental approved draft on Non-Judicial Stamp Paper of Rs.50/-. 4. Old material shall be returned to the department. 5. Guarantee 06 months. 6. Firm shall be solely responsible for any accident during execution of work and no Compensation of any kind shall be payable by the DJB. 7. The firm is advised to see the site conditions before quoting the rates, if required 8. All necessary precautions will be taken by the firm before start of work and during execution of

work.


NIT No. 17 Item No.15 Bill of Quantity

Subject:- Renovation of Various tube wells in Madan Pur Khadar in Okhla Constituency. Re-Invite

S.NO. Particular's Qty

1. Supply of hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 50mm x 50mm x 6mm angle iron frame and 16 SWG M.S sheet with horizontal and vertical intermediate member of suitable size with arrangement for moun ting of switch gear and electrical energy meter i/c painting having following items. Main switch 63 amp TP N, 415 volt Make: Havells/Advance. Fully automatic delta starter of 3 phase oil immersed type Make- Bentex, advance L&T set. Ampere meter 96mm x 96mm square shape of 0-30 Amp range. Make:- A.E voltmeter of 96mm x 96mm square shape of 0-500 volt range. Make:- A.E LED indicating lamps with fitting ( a set of 3 lamps). Make:- Vaishnav/GE, shunt capicator of 5 KVAR Make:- ABB/L&T Selector switch for voltmeter. Make:- Kaycee, motor protection assembly having earth leakage protection phase sequence corrector single phasing protection over load protection high voltage-low voltage protection. Time delay power on programmable time switch (i.e RYB phase & facility to change over from automatic to manual & vice versa upto 7.5 HP Make – Gain Guard/ Hi tech, complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc at site. The panel board shall be mounted on the base of frame of 2 feet height made of 50mm x 50mm x 6mm angle iron frame.

2 Nos

2. S/o PVC insulated & PVC sheathed flat cable with plain copper conductor having 3 core for submersible motor of 4 sq.mm size, roll of 100 mtrs. Make:- Finolex/Kalinga/Havells/Grandlay.

4 Rolls

3. S/o of double flange G.I. Column pipe 50mm dia, medium class, each of 3mtrs long duly threaded on both ends, welded & fitted with G.I flange on both ends, with slot for sub cable. Make:- TATA/Jindal.

34 Nos

4. S/o Misc items i/e rubber packing, nut bolts, bore cover, clamp, tail piece, bend etc to complete the work i/e minor civil work.

3 Lots

5. Transformer oil Make:- Savita /Powers. 12 Ltr.

6. Lifting and lowering of sub. P/set along with all allied accessories from tube wells i.c. Dismantling of of pipes by opening/ cutting of nut-bolts opening and rejointing of cables , testing, commissiong of tube wells as per requiremnts up to depth of bore . Including hiring and tronsportation of chain pulliy block, tripod stand and other tools and tackles etc as required. Name of Tubwells-: 1.Madan Pur khaddar Priyanka Camp near kali mandir 2. Alli vihar near shamshan ghat 3. Alli Village T/wells

3 Jobs.

Terms and condition

1. Payment will be made after satisfactory completion of work. 2. Work will be completed within 30 days 3. Successful Tenderer shall execute the Contract Agreement as per the departmental approved draft on Non-Judicial Stamp Paper of Rs.50/-. 4. Old material shall be returned to the department. 5. Guarantee 06 months. 6. Firm shall be solely responsible for any accident during execution of work and no Compensation of any kind shall be payable by the DJB. 7. The firm is advised to see the site conditions before quoting the rates, if required 8. All necessary precautions will be taken by the firm before start of work and during execution of

work.


delhi jal board govt. of nct of delhi executive...

Documents