delay3000 vintage modern repeater manual - igor nembrini

DELAY3000 vintage modern repeater Manual

delay3000 vintage modern repeater

Congratulations on choosing our new DELAY3000 VINTAGE MODERN REPEATER.

The Delay3000 has been developed by Nembrini Audio from the ground up and features a clear, intuitive interface that allows you to get to the delay effect you want quickly. Its glitch-free delays are perfect for automated delay time changes for stunning non-static sounds.

Delay3000 has all you need to create everything from simple delay patches to experimental soundscapes and crazy cool beats.

By adding an extensive suite of effects to Delay3000, Nembrini Audio have created the perfect environment in which to create wild delay patches. Grit, Smear, Chorus/Tremolo, Filters and Ducking have all been included to sculpt your perfect delay effect.

Inspired to a classic 80s delay hardware but x6 units in a way to achieve a delay effect where the delay time can be subdivided into multiple “taps” allowing for the creation of rhythmic delay effects.


DELAY SECTION

1 - SYNC: activates/deactivates the synchronization of the delay times with the hosting application tempo.2 - TIME: Provides adjustment of delay time, when the host SYNC is on will be with time division.3 - PATTERN: From simple ping-pong to rhythmic trances, the patterns can inspire new musical ideas. Thepatternswillcreateastereofieldofdelaytapswhenusinginstereooutput,butwill sum the channels if is mono output.4 - REPEAT:Thisistheamountofthesignalthatyou’dliketofeedbackintotheinputofyourdelaytocreate echoes. The more REPEAT, the greater the number of echoes.5 - HOLD:Whenengagedkeeptherepetitionsatmaxinawaytocreateinfiniteloop.6 - MIX: Adjusts the mix of dry input to wet delay signal.

2 3 41 6

5


DELAY SECTION

1 - MODE : Selects the currently active delay machine : - VINTAGE: more distorted and LoFi. - MODERN: more dynamic and clear.2 - GRIT: Progressively adds tube saturation.3 - SMEAR: Softens the attack of the repeats while maintaining full frequency response.4 - HIGH PASS: Reduces the low frequency content of the wet signal after the delay.5 - OFFSET: create a time offset in left/right delay sections, usefull when PATTERN parameter is setted to OFF(no “taps” standard delay)

3 4 5

1

2


MODULATION

1 - TIME: This knob adjusts the speed of modulation; clockwise motion increases speed and intensity of modulation, counter-clockwise for an opposite effect. When the host SYNC is on will be with time division.2 - DEPTH: This knob controls the depth of modulation; clockwise motion increases depth and counter-clockwise motiondecreasesdepth.SettheTIMEdialfirsttothedesiredeffect,thenusetheDEPTHcontroltotailor the modulation to your liking.3 - POWER: On/Off modulation section.4 - MODE: Selects the currently active modulation : -CHORUS - TREMOLO

3

4

1 2


DUCKING

1 - AMOUNT: Adjust the audio level that causes the ducking to close

2 - RELEASE: Sets the release time for the ducking effect. This determines how quickly the delay signal returns to full level once you stop playing. A fast Release with extreme ducking can create a dramatic special effect, while slower releases with moderate ducking can be transparent yet effective.

3 - POWER: On/Off ducking section.

3

1 2


FILTER

1 - TIME:Thisknobadjuststhespeedoffiltertransition;clockwisemotionincreasesspeedandintensityof modulation, counter-clockwise for an opposite effect. When the host SYNC is on will be with time division.2 - CENTER: center sweep frequency, the cut-off frequency will move around this center frequency.3 - DEPTH:Selectsthedepthorintensityofthefiltersweep.UseinconjunctionwiththeCENTERparameter, which sets the mid-point of the sweep, to get the precise range you desire.4 - Q FACTOR:AdjuststheQ,orresonance,ofthesweepingfilter.Lowervaluesproducemilderfilteringeffectswith abroaderresponseandlowerresonance.Highervaluescreatesharperresonantpeakswhichcan lend to dramatic sweeping and special effects5 - POWER:On/Offfiltersection.

3 4

5

1 2


METERS

1 - INPUT: show the input level.

2 - OUTPUT: show the output level.

1 2


Toolbar

1 2 3 4 5 4

1 - Open the manual and show the informations about the plugin.

2 - + and - buttons allow you to scroll through the presets.

3 -Undo/Redochangesmadetotheparametersofthepluginatanytime.

4 - With A/B banks, it is possible to compare two different settings in an easy way. It is also possible to compare pre-sets by loading them in the two different A/B banks.The red highlight will show the currently selected bank and what you will modify/save.

5 - Copy the settings from a bank to another, so you can make slight changes to the controls and compare the two settings for example.


2 3 4 5

1 - Shows the active preset. Click on the label to see the preset list. 2 - Allow you to override the current selected preset.

3 - Save the current selected preset as a new preset with a name of your choice.

4 - Delete the selected preset. 5 - Bypass the plugin in order to compare your processed and unprocessed signal.

1

delay3000 vintage modern repeater manual - igor nembrini

Documents