decortrend brochure jan2020 - decor systems...fsc®, geca, fire ratings, and returns: please call...
TRANSCRIPT
Vee Joint Timber Batten or Stud
Bevel Panel Edges
Acoustic Insulation
(optional)
DecorSorb or selected
scrim shown dotted
DecorPly
Expressed Joint Timber Batten or Stud Acoustic Insulation
(optional)
DecorSorb or selected
scrim shown dotted
DecorPly
Timber Batten or Stud
Butt Joint
Butt Joint Acoustic Insulation
(optional)
DecorSorb or selected
scrim shown dotted
DecorPly
DECOR SYSTEMS AUSTRALIA
FREECALL1800 835 035
FAX02 9648 1800
DECOR SYSTEMS NZ
FREECALL0800 000 697
DECOR SYSTEMS AUSTRALIA
NEW SOUTH WALESHouse of Decor6 Millennium CourtSilverwater NSW 2128Australia
QUEENSLAND160 Lytton RoadBalmoral QLD 4191Australia
VICTORIA91 – 115 Link Drive
Australia
WESTERN AUSTRALIA7 Bellows StreetWelshpool WA 6106Australia
DECOR SYSTEMS NZ2 Edmonton Road Hornby Christchurch 8042 New Zealand
DECOR SYSTEMS USA14250 Judicial RoadMinneapolis MN 55306USA
DECOR SYSTEMS UK178 Cheddon RoadTaunton TA2 7ANUnited Kingdom
®
Wall/Ceiling panels shall be DecorTrend 12 by Decor SystemsContact Decor Systems on Ph: 1800 835 035 (please choose a pro�le and face �nish and insert into the posts below)Panels shall be installed with Pro�le: ___________ and face �nish of: ___________ (Natural Timber Veneer DecorClear, DecorThane, DecorNexx, Smart-Look, and DecorImage)DecorSorb IAB to be applied to the rear of the panelsPanels to be �nished with DecorClear 2 pack Polyurethane �nish with the addition of BioPanel Zap-X.Panels to be installed in accordance with manufac-turer’s instructions, with either BJ2 Systems or DSB System.Joint to be ___________ (please choose a joint option)Edging to be __________(please choose an edging option)Panels to be include DecorInsul (Option 8 SmartPack) behind the panels.Decor Systems Panels require a 7 day acclimatization on site prior to installation.
FSC®, GECA, Fire Ratings, and Returns: Please call the Decor Systems Team to discuss on 1800 835 035Panel Size is to be _____________ (Please choose a panel size)Acoustic Panel type cannot to be substituted unless agreed by Architect _____________ and Acoustic Engineer _____________ (Please insert corresponding names)All panels must be supplied with Completion Certi�-cate Number _____________. (Please contact Decor Systems for your project speci�c reference number)
HOW TO WRITE UP THE SPECIFICATION:
Additional Items that may be required for your project include: