dealer / jobber/media/napa/documents/downloadable … · toyota camry, solara + highlander, rav4...

Dealer / JobberIncludes Applications 1996 + Newer

For Applications 1995 + Olderuse www.napaonline.com

2012

Weatherly No. 400Catalog No. 474-2012AEdition 2012Supersedes 474-2010A (2010)

PIC GAUGE™

Diagnose Belt Wear With Your SmartphoneGates Parts Image Capture (PIC) Gauge is an easy-to-usesmartphone app that accurately and reliably evaluatesbelt wear. PIC Gauge is designed for use by professionaltechnicians and service writers to more-accuratelydiagnose serpentine belt wear.

› Available now for iPhone and Android› Analyzes photos from the camera› Quickly diagnoses serpentine belt wear› Patent-pending analysis app

Find many belt replacement opportunities with the PIC Gauge. The results are immediate and can be stored and retrieved for future reference. Accurate detection of belt wear can lead to better replacement recommendations, satisfied customersand increased sales.

Download it for FREEPIC Gauge uses patent-pending digital imaging technologyand industry-standard specifications to determine the amount of material loss on any K-section serpentine belt.

Download the new PIC Gauge app today from theApple App Store, Google Play or Gates.com/FreeGauge2.

Think outside the toolbox.

Scan for Google Play Storefor Android PIC Gauge App

Scan for Apple App Storefor iPhone PIC Gauge App

Table of ContentsFeatured Products ................................................................ A2 - A3

Solution Kits ........................................................................... A4 - A5

Timing Component Kits ....................................................... A6

Belts & Drive Systems .......................................................... A7 - A11

Tru-Flow Water Pumps ........................................................ A12 - A13

Hose & Systems

Coolant ..................................................................... A14 - A19

Heater ....................................................................... A20 - A24

Hose Clamps ........................................................................... A25

Fuel Systems Hose ............................................................... A26 - A30

Oil Systems ............................................................................. A31

Braking Systems .................................................................... A32

Windsheild Washer & Vacuum Systems ......................... A33 - A35

Air & Defroster Systems ..................................................... A36 - A37

Service Hose ........................................................................... A38 - A39

Merchandisers & Sales Aids .............................................. A40 - A42

Professional-Grade Tools ................................................... A43 - A47

How to Use .............................................................................. A48

Model and Manufacturer Index ......................................... B1 - B4

Abbreviations ......................................................................... 1

Micro-V® Belt Installation .................................................. 2 - 4

Passenger Car and Light

Truck Micro-V® Belt Routing Guide ............................ 5 - 92

Micro-V® (Serpentine) Belt Routing Diagrams ............ 93 - 103

Belts and Coolant Hose for

Passenger Cars & Light Trucks .................................... 105 - 840

Straight Hose Size List ........................................................ 841 - 842

Micro-V AT® Belts

Listed by Number ................................................. 843 - 847

Listed by Size ........................................................ 848 - 851

XL® Belts

Listed by Number ................................................. 852 - 853

Listed by Size ........................................................ 854 - 855

FleetRunner® Micro-V® Belts

Listed by Number ................................................. 856 - 858

Listed by Size ........................................................ 859 - 860

FleetRunner® Heavy-Duty V-Belts

Listed by Number ................................................. 861

Listed by Size ........................................................ 862

Truck and Bus V-Belts

Listed by Number ................................................. 863 - 864

Listed by Size ........................................................ 865 - 866

Truck and Bus Powerband® Belts

Listed by Number ................................................. 867

Listed by Size ........................................................ 868

DriveAlign® Idler Pulley Dimensions ............................... 869 - 872

Power-Fit® Changeover Listing ........................................ 873 - 874

Warning

Be safe! Do not use NAPA Belts/Hose belts, pulleys or sprockets on

any aircraft propeller or rotor drive systems or in-flight accessory

drives. Those NAPA Belts/Hose products are not designed or intended

for aircraft use.

Caution

Use NAPA Belts/Hose products only on applications specified in

NAPA Belts/Hose literature. Install and maintain products according

to the vehicle manufacturers’ recommended procedures and with

recommended tools. Failure to follow these instructions could result

in injury or property damage. NAPA Belts/Hose disclaims all liability

due to failure to follow these instructions.

Limited Warranty for the Life of the Merchandise

Goods are warranted to be free from defects in material or

workmanship for the life of the Goods (or the published recommended

replacement interval specified by NAPA Belts/Hose). NAPA Belts/

Hose will replace or repair, at its option, any Goods proved defective in

material or workmanship during the warranty period. This is the sole

remedy for breach of warranty. Color fade and color difference is not

warranted. This warranty is void if the defect is caused by improper

installation, use or maintenance of the Goods, or used for racing or

competition. Goods are not warranted to comply with laws that may

apply to uses of the Goods not stated in related materials, e.g., use

in manned or unmanned aviation or life support applications.

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. FAILURE

TO REPLACE TIMING BELTS OR OTHER NAPA Belts/Hose PRODUCTS

AS SPECIFIED MAY RESULT IN CATASTROPHIC ENGINE OR EQUIPMENT

DAMAGE FOR WHICH NAPA BELTS/HOSE DISCLAIMS ALL

RESPONSIBILITY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.

This publication contains the latest information available to our

engineers. If you require additional application or part number

information, contact the Automotive Product Application Tech

Line at 303-744-5651.

www.NAPAbeltshose.com A1

Weatherly No. 400Catalog No. 474-2012AEdition 2012Supersedes 474-2010A (2010)

Featured Products

A2 www.NAPAbeltshose.com

napabeltshose.com

One Complete Kit Covering Over75 Million Vehicles Applications

The NAPA Belts/Hose Accessory Belt Drive Hardware Kit includesOE-quality Tensioner Hardware for convient, time saving and complete repairs.For more information see page A10 .

Accessory Belt Drive Hardware Kit

Featured Products


Cooling systems can be difficult to flush completely due to accumulated debris.

Inadequate flushing can ruin a newly installed water pump and result in warranty

problems and frustrated customers. Make sure you perform a complete cooling

system flush by using clean water and compressed air. The Power Clean Flush Tool

“water hammers” accumulated sludge and scale deposits without the use of harsh

chemicals or solvents. It cleans radiators, heat exchangers, hoses and engine blocks

more effectively than conventional flushes, maintains system integrity and ensures

warranty coverage on replacement parts, including water pumps. The Power Clean

Flush Tool patented process uses fixed dimensional control of the air and liquid

flow paths. The process allows air to pressurize the cleaning fluid to scrub

deep into corners and crevices, eliminating trapped debris.

POWERCLEANTM Flush Tool

• 5/8” and 3/4” heater hose barbs for flushing heater cores or engine blocks.

• Large rubber tip for radiator necks and direct flushing ofthe engine block.

• Small rubber tip on whip hose for direct access to heater core tube stubs.

• Durable protective storage case with room for additional items.

• Pulsating gun assembly with pre-set regulator.

• Water line backflow preventer.

• Part Nunber 91002.

• For more info see page A46.

Solution Kits

From belt jump off to chronic belt noise, we offer a line of specially engineered solutions

to enhance Original Equipment drive designs so customer vehicles are better than when they

left the showroom. At NAPA, we understand what you need to make your customers happy.

Audi/VW “Master Kits”, 1996-2005Part numbers 38193MK1, 38193MK2 + 38192MK1 •Applicationspecifickitscreatedforhighlaborapplicationswherethefront end module (bumper, grille, radiator, etc.) must be pulled forward for access to accessory and timing belt systems. •Kitreducesoveralllabortimeandexpensewhenrepairingaccessory or timing belt systems.

Ford Crown Victoria 4.6L V8 (fleet), 2003-2011Part numbers 38189K1 + 38189K2 •Kitsallowcompleteserviceofaccessorydrive,includingAlternator Decoupler Pulley (ADP), without replacing expensive alternator. •Installationofthekitwillensurelongerdurabilityandlesscostlyrepairfor the accessory drive.

Toyota Corolla, Celica, Matrix 1.8L (1ZZ-FE) 4-Cyl., 1998-2008Part numbers 39068K1 + 39068K2 •Chronicnoiseissue(squealingorrattlingnoisefromengineparticularly at low speeds) with accessory belt drive system. •Reducescomebacksandisapermanentsolutionfornoiseissues. •ReferenceTechnicalServiceBulletin:TSBEG014-01,TSBEG015-01, and TSB EG021-07.

Chrysler, Dodge + Plymouth Mini-Van 3.0L-3.8L V6, 1993-2000Part numbers 38342K, 38379K + 38398K •Underrainorsnowconditions,theserpentinebeltcouldcomeoffleaving your customer stranded. •Deliversthepropertensionandperformancetothebeltdrivesystem making it virtually impossible for the belt to jump off. •ReferenceTechnicalServiceBulletin:TSB07-01-99and07-02-94.

Toyota Camry, Solara + Highlander, RAV4 2.4L 4-Cyl., 2001-2004Part number 38216K •Noisefromenginecompartmentduringvehicleoperation,especiallyafter cold soak. •Providespropertensionandbeltsurfacetocorrectproblem. •ReferenceTechnicalServiceBulletin:TSBEG040-04.


Solution Kits

Ford F-series trucks 7.3L Diesel, 1999-2003 * Part numbers 22434K-1999 - April 28, 2001 + 22690K- April 29, 2001-2003 •KitdesignedtocorrectOEMsituationwhereupperradiatorhosemust be removed to replace the serpentine accessory drive belt. •OEupperradiatorhoseisroutedthroughaccessorydrivebeltsystem (left photo). To replace belt, cooling system must be drained and upper hose removed, adding additional cost and labor. •Kitdesignedtorouteupperhosearoundaccessorydrivesystem,allowing belt to be replaced without draining cooling system and removing radiator hoses (right photo) reducing labor by up to 50% on future belt replacement.

Honda Civic 1.8L 4-Cyl., 2006Part number 39054K •Accessorydrivebeltroutingproducesexcessiveforceontensionercausing tensioner misalignment, belt noise and possible tensioner bolt failure. •Newbeltlengthandconstructionallowfornewbeltrouting,reducingforce on tensioner and tensioner bolt. •ReferenceTechnicalServiceBulletin:09-007.

Honda Odyssey 3.5L V6, 1999-2001Part number 38327K •Buzzingorhummingsoundfromaccessorydrive,particularlyatthe alternator. •Providesproperpulleyfrictionandtensiontoeliminatenoise. •ReferenceTechnicalServiceBulletin:TSB03-052.

Mazda 6 2.3L 4-Cyl., 2003-2005Part number 38408K •Squeakingorrattlingmayemitfromenginecompartmentduringnormal driving conditions. •Newtensionerdesignpreventstensionerspring-to-housingcontactwhile new belt reduces overall noise. •ReferenceTechnicalServiceBulletin:01-018/05.

Nissan Frontier, Xterra + Pathfinder 4.0L V6, 2005-2007Part number 38378K •OEtensionerdoesnotprovidepropertensiontoserpentinebelt,causing belt squeal. •Deliversrequiredtensionandbeltgriptocorrectproblem. •ReferenceTechnicalServiceBulletin:TSBNTB06-072A.

Dodge Trucks, Chrysler Passenger Cars, 2000-2010Part number 32948K1 •Standardmaintenanceprocedurescandamagetheupperhosefillerneck. •Permanentandinexpensivefixfordamagedfillerneck.

Before After* Lower Hose differs after April 28, 2001


Timing Component Kits

Automotive Timing BeltsNAPA Belts and Hose is the largest global manufacture of OE timing belts. This means NAPA Belts and Hose is able to cover the Aftermarket with timing belts that are OE-equivalent, or better, in service lifeand performance. Our timing belts are manufactured using the same high grade materials and processes as the OE to ensure superior heat and contamination resistance. Import or domestic, NAPA Belts and Hose timing belts provide the most extensive coverage in the industry.

•Aramidreinforcednylonjacketsandbacksidejacketsfor longer wear. •HighgradeHNBRrubberforsuperiorheatandcontaminationresistance. •Premiumhighstrengthtensilemembers. •Mostextensivecoverageintheindustry.ImportorDomestic. •PTFEinfusedjacketstoreducefrictionallosses+toothshear.

Import or Domestic, if there is a car in the U.S. with a timing belt in it, we have the replacement part for it. Restore your customers’ drive system to factory original condition with NAPA Belts and Hose Timing Belts and Timing Component Kits.

Virtual Timing Belt Component Kits with Water Pump (WPK)NAPABeltsandHoseTimingBeltComponentKitswithWaterPumpoffercustomersthebestandmostcompleterepairsolutionbyincludingthesameOEcomponentsasourTCKs:timingbelts,pulleysandtensioners as well as a water pump. Timing belt driven water pumps should always be replaced at the same time as the timing belt. Don'ttakechances.WithNAPABeltsandHoseTCKWPs,youcanavoidreturns by replacing all critical system components at the same time.

•WaterPumpsaredesignedandbuiltforlonglasting, efficient cooling. •Hydraulictensionersincludedwhereavailable.

Timing Component KitsWhytakeachance?WithNAPABeltsandHoseTCKs,youcanavoidwarrantiesandcomebacksbyreplacingall critical system components at the same time.

•Popularkitscoveringover33millionimportapplicationsinclude actual OE tensioners and Idlers. •Totalsolutionforanyapplication,includingBelts,Idler(s), Tensioniers and supporting hardware with detailed installation instruction. •Greatconvenience.Easeofpartsourcing.Reducedcustomer comebacks.


Belts + Drive Systems

Micro-V AT® BeltsReplacement belt for Accessory Belt Drive Systems (ABDS) and other serpentine belt applications. Designed using advanced manufacturing technology and premium EPDM construction to provide customers with superior ABDSand new vehicle type performance.

•Beltofchoicebyprofessionaltechnicians,lasting50%-60%longerthanretailbelts. •PrecisiondimensioncontrolofribprofiletransmitsloadefficientlythroughouttheABDS allowing components to operate at optimum levels. •AbletooperateandacceptmisalignmentintheABDSsystembetterthanotherserpentinebelts. •Flexibleconstructionallowsthebelttowithstandbillionsoftopsideandbacksidebends resulting in long belt life. •MeetsorexceedsSAEJ1459.

Micro-V® Stretch Fit® BeltsNew Stretch Fit Drive Systems Demand New Solutions. NAPA Belts and Hose Micro-V® Stretch Fit® Belts, withexclusive self-tensioning technology, are the first and only Aftermarket belts engineered to fit like a glove andperform properly on these unique stretch fit drive systems.

•PatentedhighlyengineeredEPDMbeltribsareextremelyresistanttooilleaks,wearandpilling. •NewTwistLock®technologyprovidesthestrengthandflexibilityofadvancedpolyamide tensile cord. •Speciallyformulatedadhesivelocksontothecordallowingittoelongateandstretch,butnever lose tension.

Prior to installation, Stretch Fit® belts are shorter than the actual working length, but once installed they automatically tension – maintaining the proper tension over the life of the belt and ensuring optimum load-carrying capacity.

Micro-V® Dual-sided BeltsFor replacing original equipment belts on serpentine drives that require a higher degree of efficiencywhen transmitting power. Designed for small diameter pulleys and for use with or without automatic tensioners.

•V-ribbedonbothsidesofthebelt. •Speciallydesignedtoresistwearandcracking. •Broadcoverageonuniqueapplications.

Micro-V AT® EMD BeltsElectrical Mechanical Drive (EMD) belt engineered to meet the demands of Electric Assist models(Saturn Aura/Vue and Chevrolet Malibu).

•Enhancedundercordofsyntheticfibersforextendedbeltlife. •ManufacturedusingNAPABeltsandHoseTwistLock®aramidcordtechnologyfor increased load capacity.




XL® V-BeltsReplacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt tightenson the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise. •Fiber-loadedrubberstockputsmoreflexibilityalongthelengthofthebelt,yetgives the belt greater lateral stability in the pulley. •Thermallyactivetensilecordsformaintenance-freeperformancewhenproperly installed and tensioned. •Formgroundtoensureprecisetopwidthandsidewalldimensionalcontrolforproper fit in pulley as well as a smoother, quieter running belt. •MeetsorexceedsSAEJ636cspecifications.

Gold Stripe® Micro-V AT® BeltsLong wearing fiber-loaded stocks with greater load-carrying capacity designed for demanding, heavy-service drives. Designed for replacing original belts on serpentine drives and other heavy-duty V-ribbed belt applications.

•Specialbeltconstructionseliminatebeltnoise,reducetensionlossandsolveproblem drive applications. •Extraheavy-dutyconstructionresistscrackingandwear. •Precisiongroundtoassureoptimumbelt-to-pulleyfit. •Specialformationprocessforprecisedimensionalcontrol. •Reinforcedwithstretch-resistant,thermallyactivepolyestertensilemembers. •MeetsorexceedsSAEJ1459specifications.

Gold Stripe® XL® V-BeltsPremium quality replacement belts for heavy-duty engines.

•Fiberloadedrubberstockputsaddedflexibilityalongbelt’slength,yetaffordsgreater lateral stability. •Variablenotchpatterncausesbelttoruncooler,quieterandwithlessbendingstress. •PrecisionV-formingprocessassuresexactsizeandanglecontrol. •Hightenacitytensilecordsandspeciallayerofreinforcementforlong,maintenance-free performance when belt is properly installed and tensioned. •MeetsorexceedsSAE636specifications. •MeetsorexceedsRMAstandardsforstaticconductivity.



Alternator Decoupler Pulleys (ADP)NAPA Belts and Hose Alternator Decoupler Pulleys provide vibration isolation within the Accessory Belt DriveSystem resulting in smoother engine performance and efficiency and increased belt and component life.The line consists of overrunning alternator decoupler pulleys and one way clutches (not interchangeable).

•ExactOEreplacement. •Patenteddesignunmatchedbyanyothersupplier. •Torsionspringabsorbsenginevibrationforquieter,smootherride. •ChosenbyOEMtoreducenoise,vibrationandharshness. •Visitwww.NAPABeltsandHose.com/adpforin-depthinformationaboutNAPABelts and Hose’ ADP line.

PowerGrip® Individual Timing ComponentsNAPA Belts and Hose PowerGrip® timing components for those who want to replace individual parts.

•Componentsincludeautomatic,manualandhydraulictensionersandidlerpulleys. •OnlyOEcomponentsforthemostpopularandproblematicapplications.

EuroGrip® OE Drive CouplersUsing NAPA Belts and Hose proven synchronous belt technology, the flexible coupling connects the drive pulley to the decoupler pulley on the alternator and air conditioning compressor, working to dampen engine vibration and increase performance. Our high quality OE replacement couplings guarantee a perfect fit every time.

•DesignedforspecificVWandVolvovehicles. •Lubricatedjacketminimizescouplingandendpiecewearandretainstoothintegrity during operation. •Glassfibercordprovidesexcellentdimensionalstabilityathighrotationalspeeds. •Fiber-loadedconstructionmaximizestorquecapability,controlsdampingandprovides excellent age resistance. •Coupling’sflexibilitytoleratesmisalignmentincomponents. •Predictableshearpropertiesallowforcomponentprotection. NAPABeltsandHosealsooffersEuroGrip®CouplerKits,allowingyoutoreplacethedrive coupler and decoupler pulley at the same time.

Hydraulic TensionersFor applications with high loads and/or angular vibrations, where a mechanical automatic tensioner cannotprovide sufficient damping or tensioner movement.

•Market-leadingapplicationcoverage. •AllpartsareeitherOEsourcedormeet/exceedOEperformancestandards. •NAPABeltsandHosetensionerpinsettoolforsecuringpiston.



DriveAlign® Idler PulleysDesigned for use on automobiles and light trucks as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.

•Steelorthermoplasticconstructionprovideshighdurabilityforlonglife. •BearingmeetsorexceedsOEandisdesignedforapplicationspecificspeed and load requirements. •Reliableoperationundersevereconditions. •Applicatedforimportanddomesticvehicles. •Mountinghardwareincludedonsomepopularapplications.

Accessory Belt Drive Hardware KitTheNAPABelts/HoseAccessoryBeltDriveHardwareKitincludesOE-qualityTensionerHardwareforconvenient,time saving and complete repairs. For optimum performance from the Accessory Belt Drive System, every component is critical, including the hardware. Whenever you replace a Tensioner or Alternator Decoupler Pulley (ADP), perform a complete and trouble-free repair by using the correct hardware. The NAPA Belts/HoseAccessoryBeltDriveHardwareKitincludesOE-qualitybolts,spacers,bushings,dust shields and other fittings needed for most Tensioner and ADP repairs. Part No. 91051.

Part No. Size Description Qty. in Kit

91051 Kit Tacklebox 1

91051-01 M10X1.5X35 H Bolt 8

91051-02 M10X1.5X65 H Bolt 8

91051-03 M10X1.5X75 H Bolt 5

91051-04 M12X1.75X80 H Bolt 5

91051-05 M10X1.5X50 H Bolt 5

91051-06 M8X1.25X65 H Bolt 5

91051-07 M10X1.5X70 H Bolt 5

91051-08 M8X1.25X33 H Bolt 8

91051-09 M10X1.5X90 H Bolt 5

91051-10 M10X1.5X57 H Bolt 5

91051-11 M10X1.5 Nut Nut 5

91051-12 ADP02 ADP Cap 3

91051-13 M8DS Pulley Dust Shield 5

91051-14 M10DS Pulley Dust Shield 5

91051-15 M17X10B Bushing 5

91051-16 M17X12B Bushing 5

91051-17 Long Elbow GM 3.8L Elbow 3

91051-18 Short Elbow GM 3.8L Elbow 2



DriveAlign® Automatic Belt TensionersNAPA Belts and Hose is a global leader in Original Equipment (OE) System Design. With a full line of over 500 tensioners globally, you can count on NAPA Belts and Hose to supply premium quality DriveAlign® Automatic Belt Tensioners. NAPA Belts and Hose ensures that every tensioner they manufacture is built to rigid tolerances and specifications that guarantee OE fit, form and function.

•FulllinecoverageforImport,DomesticandHeavy-Dutyapplications. •Looks,fitsandfunctionsjustliketheOE. •ManufacturedusingthesametechnologyasOriginalEquipmentManufacturer(OEM) part, assuring a factory match. •Patentedvibrationdampingsystemimprovestensioners,beltsandaccessorylife. •Torsionalroundspringdesignprovidesconsistenttensionanddoesnotallowcontamination. •Comprehensivelineincludespartstofitcars,vans,SUV’sandlighttrucks.

Belt Wear and the Accessory Belt Drive System (ABDS)An important message on Belt Wear and its role in the ABDS!!

New belt vs. Worn belt illustration

Over time, belt ribs lose material, similar to a tire. With material loss, the space between the ribsincreaseswhichcancausethebeltto“bottomout”onthepulley,resultingin: •acceleratedbeltwear •slip •noise •hydroplaning

Neoprene belts exhibit cracks as they age. Ethylene Propylene Diene Monomer (EPDM), belts do NOT showcracksasquicklyandhavealifeexpectancyof50-60Kmiles.UntilallbeltmanufacturerssupplyEPDM belts, you will continue to see cracks as a sign of wear on belts!

Belt Wear Gauge

This unique tool designed to help inspect serpentine belts for wear.Contact your local NAPA Belts/Hose representative to receive your tool.

Neoprene belt with 100,000 miles EPDM belt with 100,000 miles

Tru-Flow Water Pumps


NAPA Tru-Flow offers a limited lifetime warranty and state-of-the-art manufacturing process.Tru-Flow water pumps are recognized in the industry for their durability and superior quality. Every water pump is constructed with premium alloy materials and a 100% functional test of seals and bearings along with a 100% leakage test for both the casting and assembled water pump. We are commited to selling the highest quality new, never remanufactured, water pumps in the aftermarket. Our end goal is to provide our customers with worry-free operation for the life of their vehicle.

Back Housing:Includedin many water pumpassemblies for faster,trouble-free installationsand reduced customercomebacks. Gasket:NAPATru-Flow

no-sealant gaskets ensurea tight, leak-free interfacebetween mounting surfaces.

Impeller:Engineeredandbalancedto ensure optimal coolant flow fortop performance.

Housing:NAPATru-Flowusesqualitycastaluminum with no flashing. NAPA Tru-Flowquality-cast housing have computerizedmachined surfaces and the inside cavityis designed to match OE performancefor proper coolant flow.

Seal:Unitizedsealensures maximumbearing life with leak-freeperformance.

Hub-Pulley:Manufacturedfrom quality material andprecisely pressed onto shaftwith tight tolerances toendure the working loadsand conditions.

Unitized Bearing/Shaft:Constructed as one unitized component, NAPA Tru-Flow bearing/shaft assemblies are designed to withstand the rigorous working load from the belt tensionand/or fan clutch assembly.

Water Pumps for Import Vehicles

•Over95%coverageforimportvehicles. •Metalimpellerpumpsavailablewhereapplicable. •Computerizedmachinedsurfacesforproperfit/sealing. •PreciselybalancedimpellerforOEfit/function.

Water Pumps for Heavy Duty ApplicationsNAPA Belts/Hose carries an extensive line of water pumps for heavy duty applications.

•OurheavydutywaterpumpofferingisdesignedtohandleruggedFleetstandards. •NewpumpsmanufacturedtoISO/TS16949standards. •100%fullytestedunitizedbearings/seals. •Computerizedmachinedsurfacesforproperfit/sealing.


Water Pumps with Back Housings

•Allowsthetechniciantoreplacebothpieceswithonepre-assembledunit. •Orderonepartnumberandreceivethewaterpumpandbackhousing. •Reducesinstallationtimeandensurestrouble-freeoperationwithreducedwarrantyclaims and comebacks.

Tru-Flow Water Pumps

Water Pump Coverage for virtually every Hybrid Application •CoverageincludesToyotaPrius,HondaCivic,FordEscapeandmore. •NewpumpsmanufacturedtoISO/TS16949standards. •100%fullytestedunitizedbearings/seals. •Qualitypackagingensuresintactdeliveryofallcomponents. •100%inlinequalitytested. •Limitedlifetimewarranty.

Cooling systems can be difficult to flush completely due to accumulated debris. Inadequate flushing can ruin a newly installed water pump and result in warranty problems and frustrated customers. Make sure you perform a complete cooling system flush by using clean water andcompressed air. The Power Clean Flush Tool “water hammers” accumulated sludge and scale deposits without the use of harsh chemicals or solvents. It cleans radiators, heat exchangers, hoses and engine blocks more effectively than conventional flushes, maintains system integrity and ensures warranty coverage on replacement parts, including water pumps. The Power Clean Flush Tool patented process uses fixed dimensional control of the air and liquid flow paths. The process allows air to pressurize the cleaning fluid to scrub deep into corners and crevices, eliminating trapped debris.

POWERCLEANTM

Flush Tool

• Pulsating gun assembly with pre-set regulator.

• Water line backflow preventer.

• Large rubber tip for radiator necks and direct flushing ofthe engine block.

• Small rubber tip on whip hose for direct access to heater core tube stubs.

• 5/8” and 3/4” heater hose barbs for flushing heater cores or engine blocks.

• Durable protective storage case with room for additional items.

• Part Nunber 91002.

• For more info see page A3.

Hose + SystemsCoolant


Hose Shelf LifeStorage environment, along with rubber materials, can vary the shelf life limit. Shelf life is difficult to quantifyas many variables affect the hose. Proper storage precautions can result in three to five years of shelf life.Beyond this time, there can be a significant service life decrease, depending on storage environment variables.

Some variables include:

Hose should be stored in a cool, dry area never exceeding +100°F (+38°C). If stored below freezing, pre-warming may be required prior to handling, testing and placing into service. Store hose in original container. Never stack hose too high, as its weight can crush hose at the bottom of the stack. NAPA Belts/Hose recommends hose in extended storage be visually inspected and tested prior to use. Hose judged marginal should be replaced to avoid potential failure, property damage or bodily injury. Store hose on a first-in/first-out basis. Unusually long storage, or poor storage environment can deteriorate hose, reduce performance and may lead to premature failure.

Molded Coolant HoseNAPA Belts/Hose molded coolant hose is manufactured to fit specific applications. Similar to OEM specifications.Approved for marine applications.

•Recommendforupper,lower,by-pass,heaterandothercoolanthoseapplications. •Heatandozoneresistantcover. •Engineeredtoresistelectrochemicaldegradation-theleadingcauseofhosefailure. •Re-engineeredmaterialsresistvacuumcollapse,thisreducestheneedforinternalsprings in many applications. •MeetsSAE20R4and20R3TypeECClassD-1andD-2specifications. •Temperaturerating:-40°Fto275°F(-40°Cto135°C)incoolanthoseapplications. Note: NAPA Belts/Hose recommends replacing standard worm drive and spring loaded clamps with PowerGrip® SB Clamps each time a new coolant hose is installed. Caution: Do not use for fuel or oil transfer applications.

ELECTROCHEMICALRESISTANT

Branched Radiator HoseMolded to fit specific applications. Factory quality connections are durable and eliminate coolant leaks.

•Engineeredtoresistelectrochemicaldegradation–theleadingcauseofhosefailure. •Heatandozoneresistantcover. •MeetsSAE20R4and20R3TypeECClassD-1andD-2specifications. •Temperaturerating:-40°Fto+275°F(-40°Cto+135°C)incoolanthoseapplications. Note:NAPABelts/Hoserecommendsreplacingstandardwormdriveandspringloaded clamps with PowerGrip® SB Clamps each time a new coolant hose is installed. Caution:Donotuseforfueloroiltransferapplications.


Small Inside Diameter Molded Coolant HoseSpecially designed, OEM style factory-molded hose to fit today’s smaller, tighter-fitting engine compartments.Can be used for coolant, water and air applications. Approved for marine applications.

•SimilartoOEMspecifications. •HasallthequalityfeaturesofNAPABeltsandHosemoldedcoolanthose. •Engineeredtoresistelectrochemicaldegradation–theleadingcauseofhosefailure. •Insidediametersrangefrom1⁄4"to1". •MeetsSAE20R3TypeECClassD-1andD-2specifications. •Temperaturerating:-40°Fto275°F(-40°C-135°C)incoolanthoseapplications. Note: NAPA Belts and Hose recommends replacing standard worm drive and spring loaded clamps with PowerGrip® SB clamps each time a new coolant hose is installed. Caution: Do not use for fuel or oil transfer applications.



Vulco Straight Coolant HoseSpecially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine,industrial and home applications.

•Heat-resistantcover. •MeetsSAE20R1StandardWallClassD-2requirements. •Covermarkedinone-inchincrementsforeasymeasuringandcuttingallows “custom fit” light-duty coolant installations. •Temperaturerating:-40°Fto257°F(-40°Cto125°C). •Packaging:3ft.lengths. Caution: Do not use for fuel or oil transfer applications.

Work.Part I.D. O.D. Press.No. (In.) (In.) (psi)

617 21⁄2 2.89 35

618 25/8 3.02 30

619 23⁄4 3.14 30

621 27/8 3.27 25

620 3 3.39 25

622 31⁄4 3.64 20


600 3⁄4 1.14 80

601 7/8 1.27 80

602 1 1.39 75

603 11/8 1.52 75

605 11⁄4 1.64 65

607 13/8 1.77 65

609 11⁄2 1.89 60


610 15/8 2.02 55

611 13⁄4 2.14 50

612 17/8 2.27 50

613 2 2.39 50

614 21/8 2.52 45

615 21⁄4 2.64 40

616 23/8 2.77 40


Work. Min. Bend I.D. O.D. Press. Vacuum Radius Part No. (In.) (In.) (psi) (In. Hg.) (In.) 810 21⁄4 2.71 55 20 51⁄2

811 23/8 2.83 50 20 61⁄2

812 21⁄2 2.96 50 20 61⁄2

813 25/8 3.08 40 15 71⁄2

814 23⁄4 3.21 40 15 71⁄2

815 27/8 3.33 40 15 9

816 3 3.43 40 15 9

817 31⁄2 3.93 35 15 12

818 4 4.43 30 10 20

Work. Min. Bend I.D. O.D. Press. Vacuum Radius Part No. (In.) (In.) (psi) (In. Hg.) (In.)

800 1 1.46 100 25 2

801 11/8 1.58 100 25 2

802 11⁄4 1.71 100 25 21⁄2

803 13/8 1.83 85 25 3

804 11⁄2 1.96 85 20 31⁄2

805 15/8 2.08 75 20 31⁄2

806 13⁄4 2.21 75 20 4

807 17/8 2.33 60 20 41⁄2

808 2 2.46 60 20 41⁄2

809 21/8 2.58 55 20 51⁄2

NOTE: Long spans must be supported every 3 feet.

Fleetflex Gold Wire-Inserted Coolant HoseProvides the ability to replace many sizes of tailor-made curved hoses. Results in maximum coveragewith minimum inventory. Approved for marine applications.

•Heavy-dutyfabricreinforcementwithhelicalcarbonsteelwire. •Bendseasilytomakecurvedconnections. •Cutseasilywithknifeandwirecutterstoreduceinstallationtime. •ExceedsSAE20R2TypeEC(ClassD2Tubeandcover)exceptinvacuumapplications. •Engineeredtoresistelectrochemicaldegradation–theleadingcauseofhosefailure. •Temperaturerating:–40°Fto+257°F(–40°Cto+125°C). •Packaging:Availablein10ft.lengths,individuallycartoned. Caution: Do not use for fuel or oil transfer applications.




Gold Stripe® Straight Coolant HoseStick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

•Two-plybiasfabricconstructiontomaximizeflexibilityandstrength. •Resists“coldwaterleaks”duetoadvancedEPDMtubeandcoverthatstaysoftand pliable, even under adverse operating conditions. •ExceedsSAE20R1TypeEC(ClassD-1Tube,andcover,StandardWall). •Covermarkedinone-inchincrementstofacilitateapproximatecutlengths,allows “custom-fit"installations. •Engineeredtoresistelectrochemicaldegradation–theleadingcauseofhosefailure. •Temperaturerating:–40°Fto+257°F(–40°Cto+125°C). •Packaging:3ft.lengths. Note: For a maintenance free connection, use PowerGrip® SB Clamps. Caution: Do not use for fuel or oil transfer applications.ELECTROCHEMICALRESISTANT


633 15/8 2.02 85

634 13⁄4 2.14 75

635 2 2.39 60

636 21/8 2.52 60

637 21⁄4 2.64 60

638 23/8 2.77 60

639 21⁄2 2.89 60


626 3⁄4 1.14 100

627 7/8 1.27 100

628 1 1.39 100

629 11/8 1.52 100

630 11⁄4 1.64 100

631 13/8 1.77 100

632 11⁄2 1.89 100


640 25/8 3.02 60

641 23⁄4 3.14 60

642 27/8 3.27 55

643 3 3.39 25

644 31⁄2 3.89 18

645 4 4.39 12

Gold Stripe® 4-Ply Coolant HoseFor severe operating conditions found on stationary engines, construction equipment and off-roadvehicle applications. Nitrile tube specially compounded to handle common coolants and additives.

•Four-plywoven,heavy-dutyfabricreinforcement •Neoprenecoverresistsheat,abrasionandoil. •Handleshighertemperaturesandresistspetroleumadditives. •ExceedsSAE20R1(ClassBTube,ClassCCover,HeavyWall). •Reduceswaterlossfromwaterpermeatingthehosewallandcover,adistinctadvantage over silicone. •Engineeredtoresistelectrochemicaldegradation–theleadingcauseofhosefailure. •Temperaturerating:–40°Fto+212°F(–40°Cto+100°C),intermittentto257°F(125°C). •Packaging:3ft.lengths,1each. Caution: Do not use for gasoline or diesel transfer applications.



670 23⁄4 3.31 60

672 3 3.56 60

674 31⁄4 3.81 50

676 31⁄2 4.06 50


662 13⁄4 2.31 100

663 17/8 2.43 100

664 2 2.56 90

665 21/8 2.68 90


666 21⁄4 2.81 90

667 23/8 2.94 90

668 21⁄2 3.06 75

669 25/8 3.18 75



Gold Stripe® Vibraflex® Coolant HoseFor heavy-duty applications requiring short length hose that must absorb vibration and/or fitting misalignment. High flexibility reduces installation time and provides lower cost-per-mile operation.

•Oilandheatresistantnitriletube. •Oil,abrasionandheatresistantneoprenecover. •ExceedsSAEJ20(ClassBTubeandClassCCover). •Two-plyfabricreinforced. •Temperaturerating:-40°Fto212°F(-40°to100°C). •Packaging:Oneeach,notcartoned. Caution: Do not use for gasoline or diesel transfer applications.

Work.Part I.D. Press.No. (In.) (psi)

683 23/8 x 61⁄4 35 684 2 x 31⁄2 50686 2 x 5 50687 21⁄2 x 41⁄2 35688 21⁄2 x 6 35689 23/8 x 5 35


690 21⁄4 x 41⁄2 40691 11⁄4 x 4 70692 23⁄4 x 53/8 30693 23⁄4 x 41⁄2 30694 31⁄2 x 51⁄2 25

695 3 x 4 25


Gold Stripe® Vulco-Flex® Coolant HoseHeavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

•Extrastrengthfabricreinforcementwithhelicalsteelwirespiralmoldedbetweentube and cover. •EPDMtubeandneoprenecoverforextendedservicelife. •PerformstoSAE20R5TypeECClassD-2specifications. •Engineeredtoresistelectrochemicaldegradation–theleadingcauseofhosefailure. •Temperaturerating:–40°Fto+257°F(–40°Cto+125°C). •Workingpressure40psimaximum. •Packaging:5percarton. Caution: Do not use for fuel or oil transfer applications.


Part I.D. LengthNo. Inches(mm) Inches(mm)

FM09 13⁄4 (44) 6 (152)

FM15 13⁄4 (44) 231⁄2 (597)

FM16 2 (51) 71⁄2 (191)

FM23 13⁄4 (44), 2 (51) 141⁄2 (368)

FM40 13⁄4 (44) 81⁄2 (216)

FM41 13⁄4 (44) 11 (279)

FM44 13⁄4 (44) 19 (483)

FM51 21⁄2 (64) 24 (610)

FM52 23⁄4 (70) 18 (457)

FM53 2 (51) 24 (610)

FM54 21⁄4 (57) 9 (229)

FM55 21⁄4 (57) 11 (279)

FM56 21⁄4 (57) 14 (356)

FM57 21⁄4 (57) 17 (432)


FM58 21⁄4 (57) 19 (483)

FM59 2 (51) 20 (508)

FM60 21⁄2 (64) 16 (406)

FM61 2 (51) 141⁄2 (368)

FM62 2 (51) 17 (432)

FM63 2 (51) 121⁄4 (311)

FM64 2 (51), 21⁄4 (57) 81⁄2 (216)

FM65 13⁄4 (44), 2 (51) 19 (483)

FM66 2 (51) 91⁄2 (241)

FM67 13⁄4 (44) 131⁄2 (343)

FM68 13⁄4 (44) 161⁄2 (419)

FM69 2 (51), 21⁄4 (57) 171⁄2 (445)

FM77 13⁄4 (44), 2 (51) 161⁄2 (419)

FM88 21⁄4 (57) 24 (610)


FM89 23⁄4 (70) 14 (356)

FM90 2 (51), 21⁄2 (64) 20 (508)

FM120 21⁄4 (57), 21⁄2 (64) 18 (457)

FM121 21⁄4 (57) 27 (686)

FM122 21⁄2 (64) 11 (279)

FM123 2 (51), 21⁄4 (57) 15 (381)

FM124 2 (51), 21⁄4 (57) 25 (635)

FM125 13⁄4 (44), 2 (51) 231⁄2 (597)

FM126 21⁄2 (64) 14 (356)

FM127 2 (51) 33 (838)

FM128 3 (76) 37 (940)

FM129 23⁄4 (70) 32 (813)



500°F Severe Service Silicone Coolant HoseNewer heavy-duty engines with advanced emissions systems (from 2007 to current model year) produce higher under-hood temperatures, requiring the use of silicone coolant hose. In these new low engine-air-flow andhigh-heat conditions, Silicone Coolant Hose is the perfect product.

NAPABelts/Hosenowoffershigh-quality4-plysiliconecoolanthoseforhigh-heat(upto500°F)performancein these demanding conditions.

•Availablein36”straightsections. •Premium4-plyconstruction. •HighheatresistancematerialmeetsorexceedsOEspecifications. •Industrystandardbluecoverforeasyidentification. •Usedwhenhoseroutingpassesnearturboorhotsideofthechargedairsystem. Part I.D.No. (In.)

H19625 1

H19626 11/4

H19627 11⁄2

H19628 13/4

H19629 2

Part I.D.No. (In.)

H19630 21/4

H19631 21⁄2

H19632 23/4

H19633 3


FF188 11/8(29) 12(305)FF215 11⁄8(29) 15(381)FF236 11⁄8(29) 18(457)FF275 11⁄8(29) 23(584)FF245 11⁄8(29), 11⁄4(32) 19(483)FF181 11⁄4(32) 71⁄2(190)FF184 11⁄4(32) 91⁄2(240)FF200 11⁄4(32) 13(330)FF212 11⁄4(32) 15(381)FF227 11⁄4(32) 17(432)FF239 11⁄4(32) 181⁄2(470)FF251 11⁄4(32) 20(508)FF272 11⁄4(32) 23(584)FF302 11⁄4(32) 261⁄2(673)FF314 11⁄4(32) 30(762)FF317 11⁄4(32) 35(889)

Vulco-Flex® II Coolant HoseVulco-Flex® II hose will bend in almost any direction. It easily replicates the angles and planesof a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

•Improvedsealingsurfaceforgreaterleakresistanceandincreasedflexibility for easier installation. •Heatandozoneresistantcover. •RatedforSAE20R5ClassD-2performance. •Hightemperatureratingupto+257°F(+125°C). Note: NAPA Belts/Hose recommends replacing clamps each time a new coolant hose is installed. Caution: Do not use for fuel or oil transfer applications.


Part I.D. Length No. Inches(mm) Inches(mm)

FF194 11⁄4(32), 11⁄2(38) 12(305)FF218 11⁄4(32), 11⁄2(38) 151⁄2(394) FF248 11⁄4(32), 11⁄2(38) 191⁄2(495) FF278 11⁄4(32), 11⁄2(38) 23(584)FF299 11⁄4(32), 11⁄2(38) 26(660)FF308 11⁄4(32), 11⁄2(38) 29(737)FF329 11⁄4(32), 11⁄2(38) 44(1118)FF287 13/8(35) 25(635) FF296 13/8(35), 11⁄2(38) 26(660)FF183 11⁄2(38) 8(205)FF186 11⁄2(38) 101⁄2(265)FF197 11⁄2(38) 12(305)FF206 11⁄2(38) 14(356)FF221 11⁄2(38) 151⁄2(394)FF233 11⁄2(38) 17(394) FF257 11⁄2(38) 20(508)

*90°end

Part I.D. Length No. Inches(mm) Inches(mm)

FF266 11⁄2(38) 22(559) FF284 11⁄2(38) 25(635) FF311 11⁄2(38) 30(762) FF320 11⁄2(38) 35(889) FF332 11⁄2(38) 48(1219) FF203 11⁄2(38),13⁄4(44)131⁄5 (335) FF209 11⁄2(38), 13⁄4(44) 15(381)FF224 11⁄2(38), 13⁄4(44) 161⁄2(419) FF254 11⁄2(38), 13⁄4(44) 20(508) FF263 11⁄2(38), 13⁄4(44) 22(559) FF305 11⁄2(38), 13⁄4(44) 27(686) FF260 11⁄2(38), 2(51) 22(559) FF242* 11⁄2(38) 193⁄4(505) FF281* 11⁄2(38) 231/8 (589) FF290* 11⁄2(38) 255/8 (650)



Silicone Coolant HoseExtra long-lasting hose constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications.

•Excellentforextremeambientandradianttemperatureconditions. •Resistsweathering,ozone,heatandcoolantdeterioration. •Siliconetubeandcoverresistprolongedexposuretounder-hoodandcoolantheat. •UsePowerGrip®SBclampsorsiliconehoseclamps. •ExceedsSAE20R1(ClassAStandardWall). •Temperaturerating:–70°Fto+350°F(–56°Cto+177°C). •Packaging:3ft.lengths.Individuallypolybagged. Caution: Do not use for fuel or oil transfer applications.


1508 1⁄2 110

1510 5/8 110

1512 3⁄4 110

1514 7/8 110

1516 1 90

1518 11/8 90


1520 11⁄4 85

1522 13/8 85

1524 11⁄2 85

1526 15/8 80

1528 13⁄4 80

1532 2 75


1536 21⁄4 75

1538 23/8 65

1540 21⁄2 65

1544 23⁄4 50

1548 3 50

1550 31/8 40


1552* 31⁄4 40

1556* 31⁄2 35

1560* 33⁄4 35

1564* 4 35

1572* 41⁄2 25

* SB clamps not available, use silicone hose clamps

Molded Silicone Elbow Coolant HoseNewer heavy-duty engines with advanced emissions systems (from 2007 to current model year) produce higher under-hood temperatures, requiring the use of silicone coolant hose. In these new low engine-air-flow andhigh-heat conditions, Silicone Coolant Hose is the perfect product.

NAPABelts/Hosenowoffershigh-quality4-plysiliconecoolanthoseforhigh-heat(upto500°F)performancein these demanding conditions.

•Premium4-plyconstruction. •High-heatresistancematerialmeetsorexceedsOEspecifications. •Industrystandardbluecoverforeasyidentification. •Usedwhenhoseroutingpassesnearturboorhotsideofthechargedairsystem.

45°

Part I.D.No. (In.)

H19605 13/4 H19600 21⁄2H19601 23/4H19602 3H19603 31⁄2H19604 4

90°

Part I.D.No. (In.)

H19617 13/4

H19610 2

H19611 21/4

H19612 21⁄2

H19613 23/4

H19614 3

H19615 31⁄2

H19616 4

90° Molded Heater HoseEspeciallydesignedfordifficultheaterhoseapplicationsrequiringsharp90°bendsinthehose.EliminatestheneedforextensiveinventoryofOEtypecurvedheaterhose.Just22sizeshandlethousandsofapplications.

•Engineeredtoresistelectrochemicaldegradation–theleadingcauseofhosefailure. •Resistswaterpermeation. •SimilartoheaterSAE20R3TypeECClassD-2. •Usewithheaterhoseconnectorsandbulkheaterhoseforvirtuallycompletemolded heater hose coverage. •Temperaturerating:-40°Fto275°F(-40°Cto135°C). Caution: Do not use for fuel or oil transfer applications.

Arm Arm 5⁄8” x 3⁄4” 3⁄4” x 5⁄8” Lengths Lengths 5⁄16” 3⁄8” 1⁄2” 5⁄8” (15.0 x (19.1 x 3⁄4” (In.) (mm) (7.9mm) (9.5mm) (12.7mm) (15.9mm) 19.1mm) 15.9mm) (19.0mm) 4 x 6 101.6 x 152.4 10020 10030 9801 9807 10079 10070 9815 4 x 12 101.6 x 304.8 10021 10031 9802 9808 — 10071 9816 4 x 18 101.6 x 457.2 — — 9803 9809 10076 — 9817

8 x 18 203.2 x 457.2 — — 9804 9810 — 10072 —

4 x 24 101.6 x 609.6 — — 9805 9811 — 10073 9818

8 x 24 203.2 x 609.6 — — — — — — 9819

4 x 33 101.6 x 825.0 — — — — 10077 — —

8 x 34 203.2 x 863.6 — — — — — 10078 —

4 x 36 101.6 x 914.4 — — 9806 9812 — 10074 9820

4 x 48 101.6 x 1219.2 — — — 9813 — — 9821

4 x 60 101.6 x 1524.0 — — — 9814 — 10075 9822



Hose + SystemsHeater

Gold Stripe® Heater HoseHeavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems.For a maintenance free connection, install with Power-Grip® SB clamps. Approved for marine applications.

•Coverisabrasionresistant. •AdvancedEPDMtube,coverandreinforcementwithstandhighunder-hoodandcoolant temperatures. Designed for extended use without cracking or hardening. •Engineeredtoresistelectrochemicaldegradation–theleadingcauseofhosefailure. •ExceedsSAE20R1TypeEC,StandardWallClassD-1. •Reduceswaterlossfromwaterpermeatingthehosewallandcover. •Temperaturerating:–40°Fto+275°F(–40°Cto+135°C). •Packaging:Individuallycartoned. Caution: Do not use for fuel or oil transfer applications.

Working Part I.D. I.D. Length Pressure No. (In.) (mm) (Ft.) (psi)

H130 5/8 15.9 50 95

H131 3⁄4 19 50 80

H132 7/8 22.2 50 80

H133 1 25.4 50 75

H134 11⁄4 31.7 50 70



Red Hot Supreme Heater HoseExtra heavy-duty hose designed for maximum durability. Easily recognized by its red cover.

•Unaffectedbymostcoolantsandnon-oilbasedcoolantadditives. •Unaffectedbyhighcoolingsystempressures. •SimilartoSAE20R3ClassD-2. •Temperaturerating:–40°Fto+257°F(–40°Cto+125°C). •Packaging:Individuallycartoned. Caution: Do not use for fuel or oil transfer applications.

Working Part I.D. I.D. O.D. Length Pressure No. (In.) (mm) (In.) (Ft.) (psi)

H165 1⁄2 12.7 .77 50 60

H166 5/8 15.9 .89 50 60

H167 3⁄4 19.0 1.02 50 50

H168 5/8 15.9 .89 250 60

H164 3⁄4 19.0 1.02 250 50

Working Part I.D. I.D. O.D. Length Pressure No. (In.) (mm) (In.) (Ft.) (psi) H109 1 25.4 1.34 50 45 H110 1 25.4 1.34 50 45 H111 1 25.4 1.34 50 45 H112 1 25.4 1.34 50 45 H113 1 25.4 1.34 50 45H114 1 25.4 1.34 50 45 H145 1 25.4 1.34 50 45 H146 1 25.4 1.34 50 45 H147 1 25.4 1.34 50 45 H148 1⁄4 6.3 .50 50 60

Working Part I.D. I.D. O.D. Length Pressure No. (In.) (mm) (In.) (Ft.) (psi) H149 5/16 7.9 .62 50 60 H150 3/8 9.5 .69 50 60H151 1 25.4 1.34 50 45 H152 3⁄4 19.0 1.02 50 50H153 5/8 15.9 .89 50 60 H155 1 25.4 1.34 50 45 H156 1⁄2 12.7 .77 50 60H158 1 25.4 1.34 50 45H159 5/8 15.9 .89 250 (reel) 60H160 3⁄4 19.0 1.02 250 (reel) 50

Safety Stripe® Heater HoseEPDM hose constructed for extra-long service life.

•Unaffectedbymostcoolantsandnon-oilbasedcoolantadditives. •Unaffectedbyhighcoolingsystempressures. •Goodresistancetohightemperaturesforextendedperiodsoftime. •SimilartoSAE20R3ClassD-2. •Notrecommendedforheavy-dutytruck,busandoff-roadconstruction equipment; use Green Stripe® heater hose for these applications. •Temperaturerating:–40°Fto+257°F(–40°Cto+125°C). •Packaging:Individualcartonsorreels. Caution: Do not use for fuel or oil transfer applications.


Silicone Heater HoseConstructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and othercoolant transfer hose applications. Approved for marine applications.

•Reinforcedwithtough,hightemperatureresistantpolyestertextilecords. •Exceptionallyflexible. •Highlyresistanttoweathering,coolantdeterioration,ozoneandtemperatureextremes. •ExceedsSAE20R3ClassATubeandCover. •Canbeusedforemissionhoseapplications. •Forproperinstallation,usePowerGrip®SBclampsorsiliconehoseclamps. •Temperaturerating:–70°Fto+400°F(–57°Cto+204°C). •Packaging:Individuallycartoned. Caution: Do not use for fuel or oil transfer applications.

Work. Part No. I.D. I.D. O.D. O.D. Length Press. 25 Foot (In.) (mm) (In.) (mm) (Ft.) (psi)

H500 3/8 9.5 .74 17.5 25 60 H502 1⁄2 12.7 .87 20.7 25 60

H504 5/8 15.9 .99 23.9 25 60 H506 3⁄4 19.0 1.12 27.0 25 50 H508 1 25.4 1.37 33.4 25 45

Heater Hose Connector AssortmentSturdyimpact-resistantplasticcaseholdsanassortmentof36hoseconnectorsfor1⁄4"through3⁄4"I.D.hose.Part No. 9940. Charge Item.

•Caseopensfromeitherside. •Handyplan-o-graminsidebothlidsidentifieslocationofeachtypeandsizeconnector. •Assortmentcontainstwoeachelbow,straight,reducerand“T”connectors. •Providesconvenientstorageforcompletelineofconnectors.

Part I.D.No. Description (in.)

9921 Plastic Elbow 1⁄4 9922 Plastic Elbow 3/8 9923 Plastic Elbow 1⁄2 9924 Plastic Elbow 5/8 9925 Plastic Elbow 3⁄49901 Hose Connector 1⁄49902 Hose Connector 3/8 9903 Hose Connector 1⁄2 9904 Hose Connector 5/8

Part O.D. No. Description (in.)

9905 Hose Connector 3⁄4 9931 Plastic Tee 1⁄4 9932 Plastic Tee 3/8 9933 Plastic Tee 1⁄29934 Plastic Tee 5/89935 Plastic Tee 3⁄49909 Hose Reducer 3/8 to 1⁄29910 Hose Reducer 1⁄2 to 5/89911 Hose Reducer 5/8 to 3⁄4



Heater Hose and Fuel Line ConnectorsUnique single-barb design provides greater sealability between single or dual inside diameter hoses.

•Almostanyhoseconfigurationcanbeconstructedusingstraight,elbowandteeshapes. •Glassreinforcednylonresistschemicals,gasoline,dieselfuelsandtemperatures from-40°Fto480°F(-40°Cto250°C). •Bulkheadsassureproperinsertiondepths. •Anti-rotationdevicepreventshosetwisting. •Packaging:5perpackage,except1"whichis2perpackage.

Part O.D. O.D.No. (In.) (mm)

9861 3/32 2.4

9862 1/8 3.2

9863 5/32 4.0

9864 3/16 4.8

9901 1⁄4 6.3

9907 5/16 8.0

9902 3/8 9.5

9903 1⁄2 12.7

9904 5/8 15.9

9905 3⁄4 19.0

9906 1 25.4

Straight ConnectorsPart O.D. O.D.No. (In.) (mm)

9871 3/32 2.4

9872 1/8 3.2

9873 5/32 4.0

9874 3/16 4.8

9921 1⁄4 6.3

9920 5/16 8.0

9922 3/8 9.5

9923 1⁄2 12.7

9924 5/8 15.9

9925 3⁄4 19.0

9926 1 25.4

Elbow ConnectorsPart O.D. O.D.No. (In.) (mm)

9881 3/32 2.4

9882 1/8 3.2

9883 5/32 4.0

9884 3/16 4.8

9931 1⁄4 6.3

9939 5/16 8.0

9932 3/8 9.5

9933 1⁄2 12.7

9934 5/8 15.9

9935 3⁄4 19.0

9938 1 25.4

Tee Connectors


9891 3/32 to 1/8 2.4 to 3.2

9892 1/8 to 5/32 3.2 to 4.0

9893 3/16 to 1⁄4 4.8 to 6.7

9913 5/16 to 3/8 7.9 to 9.5

9909 3/8 to 1⁄2 9.5 to 12.7

9910 1⁄2 to 5/8 12.7 to 15.9

9911 5/8 to 3⁄4 15.9 to 19.0

9912 3⁄4 to 1 19.0 to 25.4

Reducer Connectors End 1 90° Tee End 2 Part O.D. O.D. O.D. O.D. O.D. O.D. No. (In.) (mm) (In.) (mm) (In.) (mm)

9936 5/8 15.9 3/8 9.5 5/8 15.9

9937 3⁄4 19.0 3/8 9.5 3⁄4 19.0

Tee Reducer Connectors


9851 3/32 2.4

9852 1/8 3.2

9854 3/16 4.8

“Y” Connectors

Heater Hose Quick-Lok® Connector AssortmentPurchase this assortment and save verses buying each component individually. Part No. 9947.Eachassortmentincludes: •(1) Disconnect tool and (6) Quik-Lok Connectors.



Dual I.D. Heater HoseSpecially designed for heater hose applications requiring changes in diameter. Use with hoseconnectors and bulk heater hose for virtually complete molded heater hose coverage.

•Engineeredtoresistelectrochemicaldegradation–theleadingcauseofhosefailure. •MeetsSAE20R4TypeECClassD-2. •Temperaturerating:-40°Fto275°F(-40Cto135°C). Caution: Do not use for fuel or oil transfer applications.

Part No. Part No.Length 1⁄2” x 5⁄8” 5⁄8” x 3⁄4”(In.) I.D. I.D.

6 10050 10080

12 10051 10081

18 — 10082

36 — 10083

60 — 10084


Hose I.D. ReducersSlip inside current hose to reduce inside diameters, providing maximum coverage with minimum hoseinventory. Make it possible to adjust inside diameters of larger hoses for emergency replacements.

•Qualityrubberconstructionassuresmaximumdependability,noleakage. •FitsGoldStripe®straightorGoldStripe®Vulco-Flex®hoses. Caution: Recommended for coolant and air applications only.

Part SizeNo. (In.)

900 11⁄2 to 11⁄4901 13⁄4 to 11⁄2902 2 to 13⁄4

Part SizeNo. (In.)

903 21⁄4 to 2904 21⁄2 to 21⁄4905 3 to 21⁄2

Polybagged Safety Stripe® Heater HoseIdeal self-service package for retail-oriented merchandising. Fits standard pegboard displays.

•Packagemeasures12"widex13"high. •Hosecomesin6ft.lengthsofSafetyStripe®heaterhosein3/8",1⁄2", 5/8"and3⁄4"I.D.

Part I.D. I.D. No. (In.) (mm)

H109 3/8 9.5

H110 1⁄2 12.7

H111 5/8 15.9

Part I.D. I.D. . No. (In.) (mm)

H112 3⁄4 19.0

H113 7/8 22.2

H114 1 25.4

Hose Clamps


PowerGrip® SB ClampsMaintenance-free clamps that retain dynamic tension and never need retightening. These clamps stop leaks,even on out-of-round applications. Clamp down better in all conditions and temperature extremes. Environmentally friendly by eliminating antifreeze leaks and ground water contamination.

•Easytoinstallwithordinaryheatgun. •Widersealingareaentrapsconnectorbead. •Conformtoanyshapeofhoseandhousing,evenout-of-roundfittings. •Madefromaheat-sensitivethermoplasticwithamemorytopreventover–orunder-tightening. •Canbeusedwithallbrandsofsiliconehose. •Temperaturerating:-40°F-302°F(-40°C-150°C). •Packaging:Tentocarton.

Nominal Hose I.D. Fits Hose Part No. Size (In.) O.D. (In.)*

42915 SB15 1⁄4 1⁄2 to 11/16

42919 SB19 3/8 11/16 to 13/16

42922 SB22 1⁄2 13/16 to 15/16

42925 SB25 5/8 15/16 to 11/16

42929 SB29 3⁄4 11/16 to 13/16

42932 SB32 7/8 13/16 to 15/16

42934 SB34 1 15/16 to 11⁄2

42941 SB41 11⁄4 11⁄2 to 13⁄4

Nominal Hose I.D. Fits Hose Part No. Size (In.) O.D. (In.)*

42948 SB48 11⁄2 13⁄4 to 2

42954 SB54 13⁄4 2 to 21⁄4

42960 SB60 2 21⁄4 to 21⁄2

42967 SB67 21⁄4 21⁄2 to 23⁄4

42973 SB73 21⁄2 23⁄4 to 3

42979 SB79 23⁄4 3 to 31⁄4

42986 SB86 3 31⁄4 to 31⁄2

42990 SB90 31/8 31⁄2 to 35/8


Fuel SystemsHose

Diesel Emission Fluid (DEF) Tank Fill HoseDEF Tank Transfer Hose are manufactured for the specific filling functions of DEF tanks. They featurethe highest quality construction to meet the demands of DEF handling and transfer.

•3⁄4”and1”standardI.D.sizes. •Temperaturerating:-40°Fto+212°F(-40°Cto+100°C). •Non-zinc,peroxide-curedEPDM.

HosePart No. Description

DEF750025 3⁄4” DEF Hose 25’

DEF750300 3⁄4” DEF Hose 300’

DEF100025 1” DEF Hose 25’

DEF100300 1” Hose 300’

Diesel Emission Fluid (DEF) Hose AssembliesDiesel Emission Fluid (DEF) Hose Assemblies are specially designed and manufactured to convey Diesel Emission Fluid(DEF).BecauseDEFfreezesat+11°F(-12°C),thehoseandcouplingsareelectronicallyheatedusingtherevolutionary carbon fiber heating system. This patent pending technology allows for more uniform fluid heating compared to heated-wire designs. Customizable hose lengths offer greater flexibility in design while thermoplastic over-molds protect electrical connections against moisture and corrosion.

Part OEM Part Make/ EngineNumber Number Model DEF7000 M50602071230800 Peterbilt / Cummins Pete 386 w/ ISXDEF7001 M50602274110500 Peterbilt / Cummins Pete 386 w/ ISXDEF7002 M50602274320500 Peterbilt / Cummins Pete 386 w/ ISXDEF7004 04-28650-000 Freightliner 2012 Cascadia DD15DEF7006 04-28841-200 Freightliner 2012 Cascadia DD15DEF7007 52122427AC Chrysler Dodge Ram PU 6.7L

CouplingPart No. Description Size

G17100-1212 Male Pipe Solid Stem SS 3⁄4”

G17170-1212 FemaleJICSwivel 3⁄4”

G17995-0212D Ferrule SS12B1F – 2SS 3⁄4”

G17100-1616 Male Pipe Solid Stem SS 1”

G17170-1616 FemaleJICSwivel 1”

G17995-0216D Ferrule SS16B1F – 2SS 1”


Fuel SystemsHose

Barricade® Fuel Injection Hose (MPI)Low-permeation, premium hose for use on all fuel systems, including fuel injection (MPI). Approved for use with gasoline, diesel, bio-diesel including soybean methyl ester (SME), rapeseed methyl ester (RME), palm methyl ester (PME) per ASTM D6751, E-85, methanol, ethanol, ethanol extended gasoline, and gasohol fuels. Patented five-layer Greenshield® barrier technology keeps fuel out of the environment while delivering peak fuel efficiency.

•ExceedsSAEJ30R14T2(exceptforkinkresistance)aswellaslow-permeation requirements for CARB. •Aramidreinforcementspiralbraidandthermoplasticbarrierlayer. •Oil,heat,ozoneandabrasionresistantcover. •225psiworkingpressurerating. •Recommendedforanyfuelinjectionapplicationsforsuperiorservicelife. •Temperaturerating:-40°Fto275°F(-40°Cto135°C)continuous,upto302°F(150°C) intermittent. Note: Do not submerse in gasoline.

Packaging: Working 2’retail 15’ length 25’ length 250’ reel I.D. (in.) I.D.(mm) O.D.(in.) O.D.(mm) (psi) PartNo. PartNo. PartNo. PartNo. 1⁄4 6.3 1⁄2 12.7 225 H343A H356A H348A H353A 5/16 8.0 9/16 14.3 225 H344A H357A H349A H354A 3/8 9.5 5/8 15.9 225 H345A H358A H350A H355A

Barricade® Carburetion Fuel Line HoseLow-permeation, premium hose for use on carbureted engines, PCV and EEC systems, and for fuel return hoseon fuel injection systems. Not for use on the pressure-side of fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel, bio-diesel, E-85, methanol, ethanol, and gasohol fuels. Patented five-layerGreenshield® barrier technology keeps fuel out of the environment while delivering peak fuel efficiency.

•MeetsSAEJ30R14T1,EPA40CFR1051.110,andCARBsmallengineoff-roadrequirements for low permeation (except for kink resistance). •Textilespirallayer(twospiral)andthermoplasticbarrierlayer. •Oil,heat,ozoneandabrasionresistantcover. •Recommendedforcarburetedenginesincars,lighttrucks,off-roadvehiclesandsmallengines. •Temperaturerating:-40°Fto257°F(-40°Cto125°C). Note: Do not submerse in gasoline. Caution: Do not use on pressure lines on fuel injection systems or cooling system applications.

Packaging: Working 2’retail 25’ length 250’ reel I.D. (in.) I.D.(mm) O.D.(in.) O.D.(mm) (psi) PartNo. PartNo. PartNo. 3/16 4.8 13/32 10.3 50 H301 H310 H320 1⁄4 6.3 1⁄2 12.7 50 H302 H311 H321 5/16 8.0 9/16 14.3 50 H303 H312 H322 3/8 9.5 5/8 15.9 50 H304 H313 H323 1⁄2 12.7 25/32 19.8 35 H305 H314 H324

Fuel SystemsHose


Fuel Fill HoseDesigned for transferring fuel from vehicle’s filler neck to fuel tank. Works on passenger cars and light trucks,as well as on auxiliary fuel tanks on recreational vehicles. For use with most types of fuels – especiallyresistant to gasoline and diesel.

•Suitableforusewithgasoline,gasoholblendsofethanol,methanol,ethers,dieseland biodiesel to B20 (up to maximum concentrations allowed by the EPA). •Corrugatedcoverwithhelicalwirereinforcement. •Featuresahighqualitynitriletube. •MeetsrequirementsofSAE30R5. •Cutseasilywithknifeandwirecutters. •Temperaturerating:–40°Fto212°F(–40°Cto+100°C)withgasolineblends,–40°Fto125°F (–40°Cto+51°C)withbiodiesel(B20). •Packaging:3ft.lengths.

Work. I.D. Press. Part Std. (In.) (psi) No. Pkg.

11⁄4 20 1034 10 11⁄2 20 1115 10 17/8 20 1125 10 2 20 1130 10 21⁄4 20 1135 8 21⁄2 20 1140 8

Fuel Filler Neck HoseDesigned specifically for auxiliary gas tanks on recreational vehicles. Excellent replacement for passenger carsand trucks where a straight hose with a minimal bend is required.

•Suitableforusewithgasoline,gasoholblendsofethanol,methanol,ethers,dieseland biodiesel to B20 (up to maximum concentrations allowed by the EPA). •Smoothoilresistantcover,toughtextilecordreinforcementandpetroleum-resistantnitriletube. •Non-wirereinforced. •MeetsSAE30R6specifications. •Temperaturerating:-40°Fto+212°F(-40°Cto+100°C). •Biodiesel(B20)temperaturerating:-40°Fto+212°F(-40°Cto+51°C). Caution: Not recommended for marine gasoline applications.

Ctr. Work. Part I.D. Length Press. No. (In.) (in.) (psi)

1032 11⁄2 15.1 201038 13⁄4 15.0 201047 2 14.9 201057 21⁄4 14.7 20

90° Bend:

Ctr. Work. Part I.D. O.D. Length Press. No. (In.) (In.) (ft.) (psi)

1030 11⁄2 1.84 3 20 1035 13⁄4 2.09 3 20 1045 2 2.14 3 20 1055 21⁄4 2.59 3 20

Ctr. Work. Part I.D. Length Press. No. (In.) (in.) (psi)

1031 11⁄2 15.9 20 1037 13⁄4 15.9 20 1046 2 15.9 20 1056 21⁄4 15.9 20

45° Bend:


Fuel SystemsHose

Gas Pump Hose 24B (Retractable Cable) For ServiceStations and Marine ApplicationsFor dispensing gasoline, diesel and gasohol from stand-up or retractable cable type pumps requiring softwall hose. Also ideal for fuel or oil transfer applications.

•Nitriletubeandcoverprovideexcellentresistancetooilandpetroleumproducts. •One(3⁄4"I.D.)andtwo(1"I.D.)pliesofreinforcementwithbuilt-instaticwire. •Coupledwithmale,NPT,brasswithchromeplatecouplings. •UnderwritersLaboratoryListed.MeetsUL330. •Packaging:Individuallycartoned. Caution: Not recommended for reel type dispensers.

Work Thread Min. Part I.D. O.D. Length Press. Size Bend No. (In.) (In.) (Ft.) (psi) (In.) Radius

H1755 3⁄4 11/8 12 125 3⁄4 6.0 H1756 3⁄4 11/8 14 125 3⁄4 6.0 H1757 1 115/32 12 125 1 8.0 H1758 1 115/32 14 125 1 8.0

Submersible Fuel Line HoseOrdinary fuel line hose is designed to handle fuel on the inside only. The Submersible Fuel Line Hoseexceeds the SAE 30R10 rating and is capable of handling gasoline, alcohol-extended gasoline or diesel fuelin fully immersed, mobile, stationary and marine applications.

•Engineeredforconstantcontactwithgasoline(andotherliquidpetroleumdistillates) on the inside and the outside. •Excellentforuseonfuelpumpsinthegastank. •MeetstheSAE30R10specificationforsubmersiblefuellinehoseapplications. •Fluoroelastomer(FKM)tubedcoverresistsgaspermeationandretardsaging. •AramidFiberreinforcement—thesamefiberusedinbulletproofvestsandispound-for-pound stronger than steel. •Maximumtemperaturerating:+302°F(+150°C).

Work. 1-Ft. 10-Ft. 32.8-Ft.I.D. Press. Part Part Part(In.) (psi) No. No. No. 1⁄4 100 H315 H316 H3175/16 100 H209 H217 H3193/8 100 H213 H218 H318

Fuel SystemsHose


Packaged Safety Stripe® II Return Fuel Line/PCV/Evaporative EmissionControl Hose (1986 + older)Convenient, popular two foot lengths of return fuel line, PCV and EEC hose in self-service, reusable,recyclable package. Can be stacked on shelf or hung on a pegboard display.

•Easytofollowinstructionsineachpackage. •Handyhosediameterindicatorhelpscustomerselectthecorrectsize.

Work. I.D. I.D. O.D. O.D. Press. (In.) (mm) (In.) (mm) (psi) Part No. 1⁄4 6.3 1⁄2 12.7 50 H170 5/16 8.0 9/16 14.3 50 H171 3/8 9.5 5/8 15.9 50 H172

Safety Stripe® II Return Fuel Line/PCV/Evaporative EmissionControlHose(1986+older)Multi-purpose hose for use on return fuel lines, PCV and EEC systems, and for fuel return hose connectionson diesel fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel and gasoline blendsof ethanol (E85), methanol and ethers (up to the legal limits allowed by the EPA).

•Spiralreinforcedconstruction. •Nitriletube. •NBR-PVCcover. •Oilresistantcoverresiststheeffectsofhighheatandozonefoundinenginecompartments. •MeetsSAE30R6and30R7. •Vacuumratingof24In./Hgforsizeslessthan1⁄2”I.D.,and10In./Hgforsizes1⁄2”to3⁄4”I.D. at ambient temperatures. •Temperaturerating:-40°Fto257°F(-40°Cto125°C)withgasolineblends. Caution: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use Barricade Fuel Injection hose for fuel injection applications. Intended for use with fuels where MTBE concentrations are no greater than 15% by volume.

25 25 250 Work. Foot Foot Foot I.D. I.D. O.D. O.D. Press. Reel Box Reel(In.) (mm) (In.) (mm) (psi) Part No. Part No. Part No.

1/8 3.2 5/16 7.9 50 H174 — H189 3/16 4.8 13/32 10.3 50 H173 — H180 1⁄4 6.3 1⁄2 12.7 50 H175 — H190 3/16 8.0 9/16 14.3 50 H176 — H191 3/8 9.5 5/8 15.9 50 H177 — H192 7/16 11.1 47/64 18.3 35 — H179 — 1⁄2 12.7 25/32 19.8 35 — H178 H193 5/8 15.9 15/16 23.8 35 — H183 — 3⁄4 19.0 11/8 28.6 35 — H187 —


Oil Systems

3 Foot 25 Foot Length Length I.D. O.D. Work. Press. Part Part (In.) (In.) (psi) Burst No. No.

5/16 .56 400 1600 H1938 H1936 3/8 .625 400 1600 H1939 H1937 1⁄2 .780 400 1600 H1945 H1946

Transmission Oil Cooler HoseProvides a safe, heat and oil resistant connecting line between oil cooler and transmission.

•Onefiberbraidreinforcementoveranoilresistantnitrilerubbertube. •Oilandabrasionresistantblackhypaloncover. •MeetsorexceedsSAEJ1019requirements. •Canbestackedonshelforhungonpegboard. •Easy-to-followinstructionsineachpackage. •Handyhosediameterindicatoronpackage. •Packageisrecyclable. •Maximumtemperaturerating:+300°F(+150°C). •Packaging:3ft.lengthsinretailpackage;25ft.lengthsindividuallycartoned.

Same Helpful Resources, New Look. Visit NAPA Heating/Cooling’s Redesigned Website.

Visit napabeltshose.com today!

Introducing the New NAPA Heating/Cooling Website

Save valuable time by accessing our catalogs and guides, training videos and Tech Tips all in one easy-to-access location. And search our part finder to quickly look up the product number or application your customers need. It’s easier than ever to find and learn about the high-quality NAPA solutions your customers dependon:Beltdrivesystems,Coolanthosesystems, Hydraulics, Thermostats, Heatexchangers, Water pumps, Temperaturecontrol products, Fuel delivery systems.

Braking Systems

Power Brake Vacuum HoseLight-duty hose specially engineered for power brake applications on passenger cars and light trucks.

•ComplieswithDOTFMVSS106VL.MeetsSAE1403TypeL. •Ozone-resistantEPDMcover. •Textilereinforcement. •Vacuumrating30In.Hg. •Temperaturerating:–40°Fto+257°F(–40°Cto+125°C).

Work.I.D. O.D. Press. Part No.(In.) (In.) (psi) 50 Foot

11/32 .70 85 H145015/32 .82 85 H1451


Water Pump Kits (WPK)Includes water pump, timing belt, idler, tensionerand gaskets and seals (where applicable).

1. Identify the correct Year, Make, Model, and Engine Size.2.(Option1)UnderJobTypeselectWaterPumpReplacementorTimingBeltReplacement.3.(Option2)UnderCategoryselectKitProgram,underSub-CategoryselectWaterPumpKitProgram.4. (Option 3) Under Quick Picks select Water Pumps.5.SelecttheWaterPumpKitthatisrequired.

Easy Instructions ForNapa Heating/Cooling Kits Lookup:

Windshield Washer + Vacuum Systems

Clamshell PackagingFour sizes of windshield washer and vacuum tubing in self-service, recyclable packaging. •Canbedisplayedonpegboard.

NippleI.D. Size Length Part(In.) (In.) (Ft.) No.

7/64 1/8 6 H4515/32 3/16 6 H4527/32 1⁄4 6 H4531⁄4 5/16 6 H454

Windshield Washer, Vacuum and Radiator Overflow TubingIdeal for windshield washers, vacuum-operated accessories and radiator over flow.

•Vacuumandkinkresistantconstruction. •Vacuumratedto24"Hg(610mm). •MeetsSAEJ1037,J942bspecifications. •25psiworkingpressure. •Temperaturerating:-40°to+257°F(-40°Cto125°C). •Packaging:One72"lengthperbox.50ft.reel.

72 Inch 50 Foot 250 Foot 36 Inch 72 Inch 25 Foot 50 Foot Length Reel Length Length Length Length Reel Nipple Nipple I.D. Size Part Part Part I.D. Size Part Part Part Part (In.) (In.) No. No. No. (In.) (In.) No. No. No. No.

7/64 1/8 H451 H458 — 1⁄4 5/16 — H454 — H4615/32 3/16 H452 H459 — 5/16 3/8 H455 — H462 — 7/32 1⁄4 H453 H460 — 3/8 7/16 — — H463 —

Wet Arm Wiper TubingOne size, small outside diameter washer tubing designed as an integral part of windshield wiper systems.Same construction as windshield washer and vacuum tubing above.

•MeetsSAEJ1037,J942bspecifications.

Nipple Part No. Part No. I.D. Size 72 Inch 50 Foot (In.) (In.) Clamshell Reel

3/32 1/16 H450 H457



Silicone Vacuum Tubing (EGR Hose) + DPFESpecially formulated silicone rubber. High temperature resistance assures long service life in harsh environments.

•Extremelyflexibleandkinkresistant. •Alsousedtotransferair,waterandcoolantforexhaustgasrecirculation. •Orangecolorforeasyidentification. •Temperaturerating:300°F(149°C)to25In./Hg;Possiblereducedcapacityabove300°F; Maximum400°F(204°C). •Packaging:Onesix-footlengthinreusable,recyclable,self-servicepackage.

Nipple Min. Bend I.D. Size Radius Part (In.) (In.) (In.) No.

7/64 1/8 1 H466 5/32 3/16 11⁄2 H467 7/32 1⁄4 11⁄2 H468 1⁄4 5/16 11⁄2 H469

High Temperature DPFE Hose Solution KitSpecially formulated silicone rubber hoses designed as a solution for common DPFE failures. High temperature resistance assures long service life in harsh environments. Part No. H471.

•Extremelyflexibleandkinkresistant. •SolvescommonfailureissueonFord/Lincoln/MercurytrucksandSUVs. •Includestwosectionsofhosessobothcanbereplacedatthesametime. •One7/32”x13”andone5/32”x10” sectioninclamshellpackage.


Gold Stripe® Ring Retained Turbocharger HoseMade for turbocharged Class 8 and heavy-duty diesel engines. Multi-hump design isolates vibration and absorbs rotational shock. Depending on application, hose is engineered with three or four rings to maintain design integrity.

•Fourlayersiliconeconstructionwitharamidfiberreinforcementformaximumdurability. •MeetsorexceedsOEMspecifications. •Temperaturerating:-60°Fto+500°F(-51°Cto+260°C).

Work. Part I.D. Length Press. No. (In.) (In.) (psi)

1740 3 6 251741 31⁄2 6 251743 4 6 251744 4 8 25



A complete product line of heavy duty water pumps at NAPA’s competitive pricing.

New pumps manufactured to ISO/TS standards

The new NAPA Tru-Flow Water Pump product line offers high quality pumps at competitive pricing, with fullcoverage, so you can be sure to get the parts you need. NAPA Tru-Flow Water Pumps are constructed withpremium alloy materials, computer-tooled, and fitted with a precisely balanced impeller to ensure OE fit and function. Each pump undergoes a 100% functional test of seals and bearings, and a 100% leakage test for both the casting and assembled water pump. Install confidence. Install NAPA Tru-Flow Water Pumps.

NAPA TRU-FLOW HEAVYDUTY WATER PUMPS:

•Manufacturedto ISO/TS 16949 standards.

•100%fullytested unitized bearings/seals.

•Computerized machined surfaces for proper fit/sealing.

Fuel Line and Vacuum Tubing Connector KitHandy impact resistant plastic case holds an assortment of 36 fuel line and vacuum tubing connectors.Assortment includes two of each connector shapes – “Y”, elbow, tee, reducer and straight. Part No. 9946.

•Plan-o-graminsidelididentifieslocationofeachtypeandsizeconnector. •Providesconvenientstorageforcompletelineoffuellineandvacuumtubingconnectors. •Assortmentcontainstwoofeachsizefrom3/32"to3/16"O.D.

Part I.D. No. Description (In.)

9861 Straight Connector 3/329862 Straight Connector 1/89863 Straight Connector 5/329864 Straight Connector 3/169891 Reducer 3/32 - 1/89851 “Y” Connector 3/329871 Elbow 3/329872 Elbow 1/89873 Elbow 5/32

Part I.D. No. Description (In.)

9874 Elbow 3/169892 Reducer 1/8 -5/329852 “Y” Connector 1/89881 Tee 3/329882 Tee 1/89883 Tee 5/329884 Tee 3/169893 Reducer 3/16 -1⁄49854 “Y” Connector 3/16

Air + Defroster Systems


Air Vent HoseLight-duty hose for air cleaner-to-engine connections, defroster ducts and air or heater ducting.

•Extremelyflexible. •Helicalwireconstruction. •Heatandoilresistanttube. •Temperaturerating:-40°Fto+212°F(-40°Cto+100°C). •Packaging:10ft.lengths,individuallycartoned. Note: For abrasive environments use Gold Stripe® Heavy-Duty Air Vent Hose. Caution: Not recommended for conveying liquids.

Work. Vacuum Part I.D. O.D. Press. Rating No. (In.) (In.) (psi) (In/Hg)

830 5/8 .85 10 5831 3⁄4 .97 10 5832 7/8 1.10 10 5833 1 1.22 10 5834 11⁄4 1.47 10 5835 13/8 1.60 10 5836 11⁄2 1.72 10 5837 15/8 1.85 10 5838 13⁄4 1.97 10 5839 17/8 2.10 10 5840 2 2.22 5 3841 21/8 2.28 5 3

Work. Vacuum Part I.D. O.D. Press. Rating No. (In.) (In.) (psi) (In/Hg)

842 21⁄4 2.35 5 3843 23/8 2.47 5 3844 21⁄2 2.60 5 3845 25/8 2.72 5 3846 23⁄4 2.97 5 3847 3 3.22 5 3848 31⁄2 3.35 5 3849 35/8 3.47 5 3850 4 3.72 5 3851 41⁄2 3.85 5 3852 5 4.24 5 3853 51⁄2 4.74 5 3

Turbocharger HoseSpecially compounded for use as a short, flexible connector between the air intake and the turbocharger.Can also be used for turbocharger air discharge. Approved for Marine Applications.

•Siliconeelastomerinnerlinerreinforcedwithwovenfiberglassfabricandcoatedwith orange silicone rubber. •Resistshightemperaturesandpressures,coolants,weatheringandozone. •Highlyvisibleorangecolorhelpsdistinguishthishosefromenginecoolanthose. •Temperaturerating:-60°Fto+500°F(-51°Cto+260°C). •Packaging:1each.

Work I.D. Part Length Press.(In.) No. (In.) (psi)

1 1710 36 452 1714 36 3521⁄4 1715 36 3021⁄2 1716 36 3023⁄4 1718 36 253 1701 3 253 1719 36 25

Work I.D. Part Length Press.(In.) No. (In.) (psi)

33/8 1702 33/8 1533/8 1703 6 1533/8 1722 36 1531⁄2 1704 3 3031⁄2 1723 36 204 1727 36 15

Air + Defroster Systems


AV Series Air Vent HoseSpecifically designed for air cleaner-to-engine connections and other ducting applications.

•Availableinpre-formedhump(similartoVibraflex®),straightandcurvedconfigurations. •Heatandoilresistant. •Temperaturerating:-40°Fto+225°F.

Part (I.D. xLength) Style No. (In.)

Hump 682 4 x 5 696 5 x 6Straight 892 61/8 x 19Flexible Reducer 894 7 x 6 x 5Hump

Part (I.D. xLength) Style No. (In.)

Molded 870 3x51⁄4x90°*Elbow 873 31⁄2x51⁄4x45° 875 31⁄2x51⁄2x90°* 883 5x6x90° 891 6x7x90°*

*Ribbed

Gold Stripe® Heavy-Duty Air Vent HoseSpecifically designed for air cleaner-to-engine connections and other ducting applications.

•Heatandoil-resistanttube. •Flexible,helicalwirereinforced. •Coverisheat,oilandabrasionresistant. •Smoothinterioroffersminimumairresistanceformaximumefficiency. •Easilycutwithknifeandwirecutters. •Temperaturerating:-40°Fto+257°F(-40°Cto+125°C). •Packaging:10ft.lengths,individuallycartoned. Caution: Not recommended for conveying liquids.

Work Vacuum Part I.D. O.D. Press. Rating No. (In.) (In.) (psi) (In. /Hg)

825 4 4.38 10 7827 5 5.38 10 6828 51⁄2 5.88 10 6


Service Hose

Multi-Use HoseFor handling lower pressure air, water, agricultural spraying, oil or grease. Can also be used for air spray painting.

•Nitriletubeandcoverprovidehighoilresistance. •Onebraidpolyestercordreinforcement. •Temperaturerating:0°Fto+212°F(–18°Cto+100°C). •Packaging:50ft.tocarton;300ft.reels(maximumthreepieces,shortestpiece50ft.). Caution: Not recommended for use as small I.D. by-pass, coolant and heater hose. Do not use for fuel transfer applications.

Part Part Work No. No. I.D. O.D. Press. 50 Ft. 300 Ft. (In.) (In.) (psi) Braid

H1709 H1708 1⁄4 1⁄2 200 1 H1710 H1711 5/16 5/8 250 1 H1704 H1700 3/8 11/16 250 1 H1706 H1702 1⁄2 27/32 250 1 H1712 H1713 5/8 15/16 250 1 H1716 H1717 3⁄4 13/32 250 1

Thermo GP®X Air HoseLight-weight thermoplastic hose suitable for air impact tools and general service applications.

•WhitevirginPVCtubewithpolyestercordreinforcement. •Redw/blackPVCcoverresistsabrasionandcombatstheeffectsofsunlight, weathering and ozone. •Bendrestrictorsforextendedlife. •0.5"ferrulewallthicknesstoresistcrushinganddeforming. •Allowsdirtandgreasetobecleanedoffeasily. •Suitableforairimpacttools. •Factorycrimped,heavy-dutymalecouplingsassuremaximumdependabilitypressure. •Temperaturerating:-15°Fto+150°F(-26°Cto+66°C)continuousservice. •Packaging:25ft.and50ft.assemblies,individuallycartoned. Caution: Do not use near welding equipment.

Working Coupling Part I.D. O.D. Length Pressure Thread No. (In.) (In.) (Ft.) (psi) Size

H259 1⁄4 35/64 25 300 1⁄4-18NPT H260 1⁄4 35/64 50 300 1⁄4-18NPT H262 3/8 5/8 25 300 1⁄4-18NPT H263 3/8 5/8 50 300 1⁄4-18NPT H264 3/8 5/8 25 300 3/8 -18NPT H265 3/8 5/8 50 300 3/8 -18NPT H266 1⁄2 49/64 25 300 1⁄2-14NPT

dealer / jobber/media/napa/documents/downloadable … · toyota camry, solara + highlander, rav4...

Documents