datron cnc milling tools -...
TRANSCRIPT
Smart Manufacturing Solutions
DATRON CNC Milling Tools
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
2
As of: May 2014 © 2014 DATRON AG. All rights reserved.
Every care has been taken that the information stated in this catalogue is correct at the time of publication. However, in the case of any information being incorrect no responsibility can be accepted by the company. At any time, information in this catalogue may be subject to technical alterations.
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
3
DA
TR
ON
AG
DATRON CNC Milling Tools
For more than 25 years DATRON has designed and supplied top-quality Solid Carbide tools. As a manufacturer of high-precision CNC milling, drilling, engraving machines, cutting technology has always been a key issue of our research. The technological design and quality of the CNC tools determine to a large extent the economic efficiency and quality of the CNC machining process.
This catalogue presents our latest product range.
As a result of our own development and research as well as our customers’ experience we are able to offer you tools optimised for high-speed machining applications.
DATRON has a worldwide presence!
DATRON distributes CNC milling tools via 6 national and 20 international agencies worldwide. Thereby DATRON is in a position to grant fast delivery, partly within 24 hours.*
* Only selected standard tools
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
4
Tab
le o
f C
on
ten
ts
Table of Contents
DATRON DATRON CNC Milling Tools 3
Table of Contents 4-7
DATRON Tool Technology 8
DATRON Coatings 9
DATRON Table of Abbreviations 10
DATRON Individual Tools 11
DATRON Individual Consulting and Order 12-13
DATRON Single Flute End Mill 15
Single Flute End Mill 16-17
Single Flute End Mill with Polished Cutting Edge 18
Single Flute End Mill with Toric Cut 19
Single Flute End Mill, Specially Balanced 20
Single Flute End Mill, Left Hand Spiral, Right Hand Cutting 21
DATRON Double Flute End Mill 23
Double Flute End Mill, 3 mm Shank 24-25
Double Flute End Mill, 6 mm Shank 26
Double Flute End Mill, HSC-Fire 27
Double Flute End Mill with Edge Radius 28
Double Flute End Mill with Edge Radius and Polished Flute 29
Double Flute End Mill with Edge Radius 30
Double Flute End Mill, Stepped 31
Double Flute End Mill with Toric Cut 32
Double Flute End Mill, Contour Milling 33
Double Flute End Mill, HSC+ 34
Double Flute End Mill for Steel Machining 35
Page
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
5
Tab
le o
f C
on
ten
ts
Seite/pageDATRON Three, Four, and Six Flute End Mill 37
Triple Flute End Mill 38
Triple Flute End Mill with Toric Cut 39
Triple Flute End Mill with Toric Cut for PU Foam 40
Triple Flute End Mill, Roughing Mill for Copper 41
Triple Flute End Mill, Smoothing Mill for Copper 42
Four Flute End Mill 43
Four Flute End Mill with Edge Radius 44
Four Flute End Mill, Pitch 35°/38° 45
Four Flute End Mill, Roughing Mill 46
Six Flute End Mill 47
DATRON Micro-Toothed End Mill 49
Micro-Toothed End Mill 50
Micro-Toothed End Mill, Coated 51
DATRON Drill and Thread Mill 53
Drill, 3 mm Shank 54-56
Drill, 1/8” Shank 57-59
Drill, 6 mm Shank 60-61
Thread Mill Parameters Tool Database 62
Thread Mill 63
Milling Thread Mill Parameters Tool Database 64
Milling Thread Mill 65
Multi Thread Mill Parameters Tool Database 66
Multi Thread Mill 67
Page
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
6
Tab
le o
f C
on
ten
ts
Table of Contents
DATRON Standard Engraving Tool, Countersink Tool, and Cutting Diamond 83
Standard Engraving Tool 84
Standard Engraving Tool, Specially Balanced 85
Standard Engraving Tool for Steel Engraving 86
Standard Engraving Tool for Hard-Metal Machining 87
Countersink Tool 88
Countersink Tool for Foam 89
Countersink Tool for Acrylic 90
Milling Countersink Tool 91-92
V-Slotting Mill 93
Cutting Diamond 94
DATRON Face Milling Tool 95
Face Milling Tool 96
Page
DATRON Ball Nose End Mill, External Radius End Mill, Slotting Mill and Dovetail Milling Tool 69
Ball Nose End Mill, One Flute 70
Ball Nose End Mill, Polished, One Flute 71
Ball Nose End Mill, Double Flute 72
Ball Nose End Mill, Four Flutes, Short Version 73
Ball Nose End Mill, Four Flutes, Long Version 74
Ball Nose End Mill, Two Flutes with Toric Cut 75
Micro Ball Nose End Mill with Toric Cut 76
External Radius End Mill 77
External Radius End Mill, Polished 78
Deburring End Mill, Two Flutes 79
T-Slotting Mill 80
Dovetail Milling Tool 81
DATRON Diamond Milling Tool 97
Tailor-Made Milling Tools for Machining CRP and GRP 98
Diamond Mill for CRP/GRP 99
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
7
Tab
le o
f C
on
ten
ts
DATRON Data Sheet 129
Order Form 130
CNC Efficient Machining with Small Tools! 131
DATRON CNC Milling Machines 132-133
DATRON Dental Mills 134
Notes 135
DATRON Accessories and Expendable Material 101
Collet Chucks for HF Spindles 102
Service Kit for HF Spindles 103
Tool Change Stations 104
Limit Stop Rings and Insertion Tool 105
Adapter Collets 106
DATRON/Schunk Information 107
DATRON/Schunk HSK-E Collets 108
DATRON/Schunk Clamping Devices 109
DATRON VacuCard++ 110
Expendable Material 111-115
Page
DATRON Clamping Tools 117
Wedge Clamping Elements KSE 118-119
Compact Centric Clamp KZS 120-121
Multifunctional Clamp MFS 122-123
Single-Acting Clamping Vise KSO 124-125
Guide Values for Speed and Feed 126-128
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
8
DA
TR
ON
To
ol T
ech
no
log
y
Quality and Precision "Made in Germany" The tools are manufactured on top-of-the-range, fully automatic grinding machines which results in constant high quality and an excellent price/efficiency ratio. Permanent quality control and research on our inhouse milling machines – also under extreme mil-ling conditions – are your guarantee for the extraordinary quality and efficiency of the DATRON tools.
n Development
n Testing
n Production
n Drilling from 0.1 mm
n Milling from 0.1 mm
n Thread milling from M1
DATRON Tool Technology
DATRON Technology:The cutting geometry of the DATRON milling tools contains the DATRON know-how of more than 25 years in HSC cutting. Constant advancement and optimisation stand for state-of-the-art tools.
n Intelligent geometry
n Latest grinding machines
n Top-quality micro-grain Solid Carbide
Individual Tool Service:DATRON special-purpose tools will solve your machining problem! On the basis of your drawings or specifications we will manufacture a Solid Carbide special-purpose tool in the high DATRON quality you can expect. Here we offer e. g. special mills for musical instruments, multi-level drills and special tools for forms and moulds.
Profitability:Using DATRON’s high-quality micrograin Solid Carbide tools will result in especially long tool life. The tool’s efficiency is further increased by a new coating.
n Maximum milling ability
n Maximum tool life
n Maximum process reliability
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
9
DA
TR
ON
Co
atin
gs
DATRON Coatings
BALINIT® ALCRONA Coating Low frictional value and hot hardness
Layer properties
Material AlCrN
Micro hardness 3200 HV
Frictional value 0,35 (dry against steel)
Max. application temperature 1100°C
Colour light-gray
Excellent wear-resistance, thermal shock stability and hot hard-ness – those are the properties, which have been decisively modi-fied, in order to further improve the proven BALINIT® ALCRONA layer. By optimising the process parameters and modifying the layer structure, the performance profile of the new layer is signifi-cantly increased. BALINIT® ALCRONA is the new top allrounder in chip removal.
BALINIT® X.CEED Coating Hardness and high coating adhesion
Layer properties
Material AlTiN
Micro hardness 3300 HV
Frictional value 0,4 (dry against steel)
Max. application temperature 900°C
Colour blue-gray
Hardness, oxidation-resistance and thermal stability of BALINIT® X.CEED have been optimised for use in hard and high-speed machining. Even for high-strength and hard-to-cut materials, the layer protects against abrasion and adhesion over the entire cutting speed range. The good sliding properties reduce the cutting forces.
Diamond CoatingHigh hardness and chemical resistance
Layer properties
Material Diamond
Micro hardness 10.000 HV
Frictional value 0,40 (dry against steel)
Max. application temperature 700°C
Colour dark-gray
The unique material properties of multilayer diamond coatings offer considerable performance potential, which can be used for machining graphite as well as carbide and ceramic green compacts. These highly abrasive materials can be machined very efficiently today, thanks to exactly constructed CVD diamond layers on carbide.
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
DA
TR
ON
Ein
sch
nei
der
- S
ing
le F
lute
En
d M
ill
10
Aluminium
Machinable Materials Ball NoseDIN 6535Form HB
Shank Form
1flute
Number of Flutes
r
Flute with Edge Radius
165°
Point Angle
HRC< 50
Hardness Grade Sharp-edged Flute
30°
Spiral Angle
SC
Solid Carbide
Feed Direction
Legend
D1 Flute Diameter
D2 Shank Diameter
D3 Toric Cut Diameter
L1 Total Length
L2 Flute Length
L3 Usable Length
α Angle
R Radius
CT Coating
C Code
A/R Angle/Radius
DATRON Table of Abbreviations
DA
TR
ON
Tab
le o
f Ab
bre
viat
ion
s
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
11
DA
TR
ON
In
div
idu
al T
oo
ls
Do you need a special tool? This is no problem at DATRON!
DATRON will produce individual tools for your special application starting in a minimum amount of time. The tools are produced at top DATRON quality according to your drawings/specifications on the most modern, fully automatic grinding machines. A few examples for this are stepped milling tool, stepped drill, special die and micro tools.
Simply enter the desired characteristic data in the table below and send it to us via fax or e-mail. Please note that we charge an additional machining fee for the regrinding service.
By fax to: +49 (0) 61 51 - 14 19 - 39By e-mail to: [email protected]
Name Your individual data
Milling tool comparable with article number Art. No.:
D1 Cutting edge diameter
D2 Shaft diameter
D3 Toric cut diameter
L1 Total length*
L2 Cutting edge length
L3 Effective length, toric cut
R Radius
BS Coating
Remarks:
* The total length L1 can vary.
DATRON Individual Tools
R
L1
L3
D2
D3
L2
D1
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
12
DA
TR
ON
In
div
idu
al C
on
sult
ing
DATRON Individual Consulting and Order
Tool order hotline: +49(0)6151-1419-133Do you already know what you need?
Then you can place your order by phone. If we receive your order by 3:00 p.m., your goods will be shipped on the same day!
DATRON CNC milling tools express mail: Nobody is faster! Order daily until 3:00 p.m. CET and we will send your package with DPD on its way. Express deliveries are possible until 4:00 p.m. CET. Details on the additional charges are available from our hotline.
DATRON e-mail ordering: [email protected]
DATRON online-shop: www.datronshop.de
DATRON fax ordering: +49(0)6151-1419-39 Send your order conveniently and easily with our fax order form (see page 130).
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
13
DA
TR
ON
In
div
idu
al C
on
sult
ing
Tool consultancy hotline: +49(0)6151-1419-480
We'll be happy to advise you! Our technology specialists will help you choose the right tool, parameters, milling strategy or clamping technique.
DATRON’s Sales Partner Team is constantly growing around the world. To find a Partner near you, check us out on:
Jürgen Murano
Head of CNC and Dental Milling Tools
Dipl.-Ing. (FH)
Sebastian Seelmann
Area Sales Manager CNC Milling Tools International
E-Mail: [email protected] Phone: +49 (0)6151 -1419-38
agencies.datron.com
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
14
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
15
DA
TR
ON
Sin
gle
Flu
te E
nd
Mill
These tools are available with various cutting lengths and shank diameters. The patented balanced single flute end mill – an exclusive DATRON product. Powerful, economical and highly efficient.
Gold
Wood
Silver
Copper
Brass
Plastic
Aluminium
DATRON Single Flute End Mill
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
16
D1
D2
L1
L2
DA
TR
ON
Sin
gle
Flu
te E
nd
Mill
1flute
SC30°
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
DATRON Single Flute End Mill
■ Micrograin solid carbide end mill
■ with single flute and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
This specially-cut end mill is designed for very fast feed rates and very high chip removal capacity.
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0068003E 0.3 3.0 40.0 1.0
0068004E 0.4 3.0 40.0 1.0
0068005E 0.5 3.0 40.0 1.5
0068006E 0.6 3.0 40.0 2.5
0068606E 0.6 3.175 40.0 2.5
0068008E 0.8 3.0 40.0 3.0
0068608E 0.8 3.175 40.0 3.0
0068010E 1.0 3.0 40.0 4.0
0068610E 1.0 3.175 40.0 3.0
0068410E 1.0 6.0 50.0 4.0
0068612E 1.2 3.175 40.0 4.0
0068015E 1.5 3.0 40.0 5.0
0068615E 1.5 3.175 40.0 4.0
0068415Y 1.5 4.0 40.0 5.0
0068415E 1.5 6.0 50.0 7.0
0068415A 1.5 6.0 50.0 3.0
0078415E 1.5 6.0 58.0 7.0
0068016E 1.6 3.0 38.0 5.0
0068020G 2.0 3.0 40.0 6.0
0068020E 2.0 3.0 40.0 8.0
0068020L 2.0 3.0 40.0 10.0
0068020W 2.0 3.0 65.0 15.0
0068030Y 3.0 3.0 65.0 10.0
0068030W 3.0 3.0 65.0 15.0
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0068620G 2.0 3.175 40.0 5.0
0068620E 2.0 3.175 40.0 8.0
0068620F 2.0 3.175 40.0 11.5
0068432Y 2.0 4.0 40.0 8.0
0068432A 2.0 6.0 50.0 5.0
0068432E 2.0 6.0 50.0 7.0
0068432L 2.0 6.0 50.0 11.0
0068932A 2.0 6.0 50.0 5.0 x
0068932E 2.0 6.0 50.0 7.0 x
0078420E 2.0 6.0 58.0 7.0
0068024A 2.4 3.0 40.0 5.5
0068024E 2.4 3.0 40.0 8.0
0068624E 2.4 3.175 40.0 8.0
0068024L 2.4 3.0 40.0 10.0
0078424E 2.4 6.0 50.0 8.0
0068425A 2,5 6.0 50.0 5.0
0078425E 2,5 6.0 58.0 8.0
0068030E 3.0 3.0 40.0 10.0
0068030Z 3.0 3.0 40.0 10.5
0068030Y 3.0 3.0 65.0 10.0
0068630E 3.0 3.175 40.0 9.0
0068630F 3.0 3.175 40.0 11.5
0068430Y 3.0 4.0 40.0 10.0
0068430A 3.0 6.0 50.0 5.0
CT = BALINIT® ALCRONA Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
17
D1
D2
L1
L2
1flute
SC30°
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0068430E 3.0 6.0 50.0 8.0
0068930E 3.0 6.0 50.0 8.0 x
0068430S 3.0 6.0 50.0 10.0
0068930S 3.0 6.0 50.0 10.0 x
0068430L 3.0 6.0 50.0 12.0
0068930L 3.0 6.0 50.0 12.0 x
0078430E 3.0 6.0 58.0 8.0
0078430S 3.0 6.0 58.0 10.0
0078435E 3.5 6.0 58.0 10.0
0068434Y 4.0 4.0 40.0 10.0
0068434Z 4.0 6.0 45.0 14.0
0068434A 4.0 6.0 50.0 5.0
0068434B 4.0 6.0 50.0 7.0
0068434E 4.0 6.0 50.0 10.0
0068434F 4.0 6.0 58.0 20.0
0068934E 4.0 6.0 50.0 10.0 x
0068434L 4.0 6.0 50.0 12.0
0068934S 4.0 6.0 50.0 14.0 x
0078440E 4.0 6.0 58.0 10.0
0078440L 4.0 6.0 58.0 18.0
0068934L 4.0 6.0 58.0 20.0 x
0068434F 4.0 6.0 58.0 20.0
DATRON Single Flute End Mill
■ Micrograin solid carbide end mill
■ with single flute and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
This specially-cut end mill is designed for very fast feed rates and very high chip removal capacity.
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0068434S 4.0 6.0 60.0 14.0
0068435B 5.0 6.0 50.0 8.0
0068435E 5.0 6.0 50.0 12.0
0068935E 5.0 6.0 50.0 12.0 x
0068435L 5.0 6.0 60.0 22.0
0068935L 5.0 6.0 60.0 22.0 x
0068460C 6.0 6.0 50.0 8.0
0068460E 6.0 6.0 50.0 14.0
0068960E 6.0 6.0 50.0 14.0 x
0068460L 6.0 6.0 60.0 20.0
0068960L 6.0 6.0 60.0 20.0 x
0068460A 6.0 6.0 60.0 25.0
0068460B 6.0 6.0 65.0 30.0
0068079E 7.0 8.0 60.0 14.0
0068080E 8.0 8.0 60.0 14.0
0068080L 8.0 8.0 60.0 20.0
0068080A 8.0 8.0 60.0 25.0
0068080B 8.0 8.0 80.0 32.0
0068470E 10.0 10.0 60.0 20.0
0068470L 10.0 10.0 100.0 40.0
CT = BALINIT® ALCRONA Coating
DA
TR
ON
Sin
gle
Flu
te E
nd
Mill
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
18
DA
TR
ON
Sin
gle
Flu
te E
nd
Mill
1flute
SC30°
DIN 6535Form HA
Acrylic Plastic
D1
D2
L1
L2
DATRON Single Flute End Mill with Polished Cutting Edge
■ Micrograin solid carbide end mill
■ with single flute and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
For this tool, optimised for plastic machining, in addition to the additional polish-grinding, the cutting geometry was also reworked, the cutting angles are now designed much sharper. Compared to universal single-flutes, this leads to a considerably more sharp cutting edge.
With this, top-quality surface results can be realised on plastic contours.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0078310E 1.0 6.0 50.0 4.0
0078320E 2.0 6.0 50.0 7.0
0078320L 2.0 6.0 50.0 11.0
0078330E 3.0 6.0 50.0 8.0
0078330L 3.0 6.0 50.0 12.0
0078334E 4.0 6.0 50.0 10.0
0078334L 4.0 6.0 60.0 22.0
0078335E 5.0 6.0 50.0 12.0
0078335L 5.0 6.0 60.0 22.0
0078360E 6.0 6.0 50.0 14.0
0078360L 6.0 6.0 60.0 22.0
0078338E 8.0 8.0 60.0 22.0
0078338L 8.0 8.0 70.0 32.0
0078339E 10.0 10.0 75.0 32.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
19
D1
D2
L1
L2
L3
D3
DA
TR
ON
Sin
gle
Flu
te E
nd
Mill
1flute
SC30°
DIN 6535Form HA
Aluminium Gold Plastic
Copper Brass
■ Micrograin solid carbide end mill
■ with single flute and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
■ toric cut
With this specially ground milling tool, you can perform particu-larly deep milling work with high feed rates in the material. The large chip groove allows optimal chip removal.
Art. No. D1 D2 D3 L1 L2 L3
(mm) (mm) (mm) (mm) (mm) (mm)
00684910 1.0 6.0 0.9 50.0 4.0 7.00
00684915 1.5 6.0 1.4 50.0 7.0 11.00
0068492K 2.0 6.0 1.8 50.0 4.0 12.00
0068492E 2.0 6.0 1.8 50.0 7.0 14.00
0068493K 3.0 6.0 2.8 50.0 4.0 14.00
0068493E 3.0 6.0 2.8 50.0 8.0 14.00
0068493D 3.0 6.0 2.8 50.0 4.0 17.00
0068493S 3.0 6.0 2.8 50.0 8.0 17.00
0068493F 3.0 6.0 2.8 50.0 4.0 21.00
0068493L 3.0 6.0 2.8 50.0 8.0 21.00
0068494K 4.0 6.0 3.8 50.0 5.0 18.00
0068494E 4.0 6.0 3.8 50.0 10.0 18.00
0068494D 4.0 6.0 3.8 50.0 5.0 21.00
0068494S 4.0 6.0 3.8 50.0 10.0 21.00
0068495K 5.0 6.0 4.8 60.0 5.0 22.00
0068495E 5.0 6.0 4.8 50.0 12.0 22.00
0068496K 6.0 6.0 5.8 60.0 5.0 24.00
0068496E 6.0 6.0 5.8 50.0 14.0 24.00
0068496F 6.0 6.0 5.8 60.0 5.0 30.00
0068496L 6.0 6.0 5.8 60.0 14.0 30.00
DATRON Single Flute End Mill with Toric Cut
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
20
DA
TR
ON
Sin
gle
Flu
te E
nd
Mill
1flute
SC30°
DIN 6535Form HA
Aluminium Gold Plastic
Copper Brass
D2
L1
L2
L3
D1
D3
■ Micrograin solid carbide end mill
■ with single flute and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
■ specially balanced
■ toric cut
These tools are available with various cutting lengths and shank diameters. The patented balanced single flute end mill – an exclusive DATRON product. Powerful, economical and highly efficient.
DATRON Single Flute End Mill, Specially Balanced
Art. No. D1 D2 D3 L1 L2 L3
(mm) (mm) (mm) (mm) (mm) (mm)
0068085E 5.0 6.0 4.8 50.0 8.0 13.0
0068085S 5.0 8.0 4.8 50.0 8.0 13.0
0068086E 6.0 6.0 5.5 50.0 10.0 16.0
0068086S 6.0 8.0 5.5 50.0 10.0 16.0
0068086L 6.0 6.0 5.5 50.0 16.0 23.0
0068086X 6.0 6.0 5.5 55.0 21.0 27.0
0068088K 8.0 8.0 7.4 50.0 8.0 12.0
0068088E 8.0 8.0 7.4 60.0 14.0 26.0
0068088S 8.0 8.0 7.4 60.0 21.0 31.0
0068088L 8.0 8.0 7.4 60.0 26.0 34.0
0068080D 8.0 8.0 7.4 70.0 13.0 42.0
0068088X 8.0 8.0 7.4 70.0 31.0 42.0
0068090K 10.0 10.0 9.2 50.0 10.0 15.0
0068090E 10.0 10.0 9.2 60.0 17.0 27.0
0068090L 10.0 10.0 9.2 60.0 26.0 33.0
0068090M 10.0 10.0 9.2 85.0 26.0 33.0
0068090X 10.0 10.0 9.2 70.0 32.0 42.0
0068090S 10.0 10.0 9.2 80.0 17.0 52.0
0068090Z 10.0 10.0 9.2 125.0 25.0 85.0
0068092K 12.0 12.0 11.0 60.0 12.0 19.0
0068092E 12.0 12.0 11.0 70.0 21.0 33.0
0068092L 12.0 12.0 11.0 70.0 31.5 42.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
21
D1
L2
D1
D2
L1
L2
DA
TR
ON
Sin
gle
Flu
te E
nd
Mill
1flute
SC30°
DIN 6535Form HA
Aluminium Gold Plastic
Copper Brass
■ Micrograin solid carbide end mill
■ with single flute and flat bottom
■ 30° Downcut spiral
■ shank without clamping surface DIN 6535-HA
Due to the downcut spiral, the cutting pressure during milling is exerted downward, preventing especially delicate work pieces from being lifted.
DATRON Single Flute End Mill, Left Hand Spiral, Right Hand Cutting
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068471E 1.5 6.0 50.0 7.0
0068472E 2.0 6.0 50.0 7.0
0068473E 3.0 6.0 50.0 8.0
0068474E 4.0 6.0 50.0 10.0
0068475E 5.0 6.0 50.0 12.0
0068476E 6.0 6.0 50.0 14.0
0068476L 6.0 6.0 60.0 20.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
22
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
23
DA
TR
ON
Do
ub
le F
lute
En
d M
ill
Gold
Silver
Copper
Brass
Plastic
Aluminium
DATRON double flute end mills are available in special models.
With extra short cutting edge, toric cut, or stepped.
New DATRON products: coated micro-tools for steel machining with extra short flutes.
Steel
DATRON Double Flute End Mill
Wood
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
24
D1
D2
L1
L2
DA
TR
ON
Do
ub
le F
lute
En
d M
ill 2flutes
SC30°
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
■ Micrograin solid carbide end mill
■ with double flute and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
DATRON ‘s double flute end mills are available in special versi-ons: with extra short flutes, toric cut or stepped. These tools are especially suitable to produce a high surface quality. The symme-trical arrangement of the flutes and the resulting high concen-tricity, make these tools also suitable for the production of fits. In addition, coated micro tools with an extremely short flute for steel machining are also available.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
00680010 0.1 3.0 40.0 0.2
00680020 0.2 3.0 40.0 0.4
00680025 0.25 3.0 40.0 0.4
0068003 0.3 3.0 40.0 0.9
0068004K 0.4 3.0 40.0 0.6
0068004 0.4 3.0 40.0 2.5
0068604 0.4 3.175 38.0 2.5
0068005K 0.5 3.0 40.0 1.0
0068005 0.5 3.0 40.0 2.5
0068605 0.5 3.175 38.0 3.0
0068006K 0.6 3.0 40.0 1.0
0068006 0.6 3.0 40.0 3.0
0068606 0.6 3.175 40.0 3.0
0068008 0.8 3.0 40.0 4.0
0068608 0.8 3.175 40.0 5.0
0068009 0.9 3.0 40.0 5.0
0068609 0.9 3.175 40.0 5.0
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068010S 1.0 3.0 40.0 2.3
0068010K 1.0 3.0 40.0 3.0
0068010 1.0 3.0 40.0 5.0
0068010L 1.0 3.0 40.0 8.0
0068610K 1.0 3.175 40.0 3.0
0068610 1.0 3.175 40.0 4.0
0068012S 1.2 3.0 38.0 2.3
0068012K 1.2 3.0 40.0 3.0
0068012 1.2 3.0 40.0 5.0
0068613 1.3 3.175 38.0 5.0
0068612 1.2 3.175 40.0 5.0
0068015 1.5 3.040.0
5.0
0068615 1.5 3.17540.0
6.0
0068015S 1.5 3.0 38.0 10.0
0068016 1.6 3.0 38.0 6.0
0068616 1.6 3.175 38.0 6.0
0068617 1.7 3.175 38.0 6.0
DATRON Double Flute End Mill, 3 mm Shank
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
25
D1
D2
L1
L2
DA
TR
ON
Do
ub
le F
lute
En
d M
ill2flutes
SC30°
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
DATRON Double Flute End Mill, 3 mm Shank
■ Micrograin solid carbide end mill
■ with double flute and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
DATRON ‘s double flute end mills are available in special versi-ons: with extra short flutes, toric cut or stepped. These tools are especially suitable to produce a high surface quality. The symme-trical arrangement of the flutes and the resulting high concen-tricity, make these tools also suitable for the production of fits. In addition, coated micro tools with an extremely short flute for steel machining are also available.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068618 1.8 3.175 38.0 6.0
0068020K 2.0 3.0 40.0 4.0
0068020 2.0 3.0 40.0 9.0
0068620K 2.0 3.175 40.0 4.0
0068620 2.0 3.175 40.0 8.0
0068024K 2.4 3.0 40.0 5.0
0068024 2.4 3.0 40.0 8.0
0068624K 2.4 3.175 40.0 5.0
0068624 2.4 3.175 40.0 8.0
0068625 2.5 3.175 40.0 8.0
0068030K 3.0 3.0 40.0 6.0
0068030A 3.0 3.0 40.0 10.0
0068030L 3.0 3.0 40.0 12.0
0068030X 3.0 3.0 60.0 25.0
0068630K 3.0 3.175 40.0 6.0
0068630 3.0 3.175 40.0 10.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
26
D1
D2
L1
L2
DA
TR
ON
Do
ub
le F
lute
En
d M
ill 2flutes
SC30°
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
■ Micrograin solid carbide end mill
■ with double flute and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
DATRON ‘s double flute end mills are available in special versi-ons: with extra short flutes, toric cut or stepped. These tools are especially suitable to produce a high surface quality. The symme-trical arrangement of the flutes and the resulting high concen-tricity, make these tools also suitable for the production of fits. In addition, coated micro tools with an extremely short flute for steel machining are also available.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068430K 3.0 6.0 40.0 6.0
0068430 3.0 6.0 50.0 7.0
0068430G 3.0 6.0 50.0 11.0
0068434K 4.0 6.0 40.0 6.0
0068434 4.0 6.0 50.0 8.0
0068435K 5.0 6.0 40.0 6.0
0068435A 5.0 6.0 50.0 8.0
0068435 5.0 6.0 50.0 10.0
0068460Y 6.0 6.0 40.0 6.0
0068460K 6.0 6.0 50.0 10.0
0068460 6.0 6.0 50.0 18.0
0068460G 6.0 6.0 60.0 20.0
0068460X 6.0 6.0 75.0 30.0
0068460W 6.0 6.0 75.0 40.0
0068460Z 6.0 6.0 100.0 40.0
0068081L 8.0 8.0 60.0 32.0
0068081 8.0 8.0 63.0 16.0
0068082 8.0 8.0 100.0 40.0
0068083 10.0 10.0 100.0 40.0
0068100 10.0 10.0 40.0 10.0
0068100A 10.0 10.0 72.0 25.0
DATRON Double Flute End Mill from 6 mm Shank
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
27
DA
TR
ON
Do
ub
le F
lute
En
d M
ill2flutes
SC20°
DIN 6535Form HA
Aluminium Plastic Copper
Brass
D1
D2
L1
L2
■ Micrograin solid carbide end mill
■ with double flute and flat bottom
■ 20° upcut spiral
■ shank without clamping surface DIN 6535-HA
■ centre cut with one long flute
The special cutting geometry and the reinforced solid carbide core ensure even more stability when face milling. The 20° steep helix angle as well as the over centre cutting edge allow excepti-onal chip removal and a smooth floor surface.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068876S 6.00 6.0 50.00 12.00
0068876K 6.00 6.0 50.00 17.00
0068876 6.00 6.0 60.00 22.00
0068876L 6.00 6.0 70.00 32.00
0068878S 8.00 8.00 50.00 12.00
0068878K 8.00 8.00 50.00 17.00
0068878 8.00 8.00 60.00 22.00
0068878L 8.00 8.00 70.00 32.00
0068870S 10.00 10.00 50.00 12.00
0068870K 10.00 10.00 50.00 17.00
0068870 10.00 10.00 60.00 22.00
0068870L 10.00 10.00 70.00 32.00
DATRON Double Flute End Mill, HSC-Fire
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
28
D1R
L2
D1
D2
L1
L2
DA
TR
ON
Do
ub
le F
lute
En
d M
ill 2flutes
SC30°
DIN 6535Form HA r
Aluminium Gold Wood
Plastic Copper Brass
■ Micrograin solid carbide end mill
■ with double flute and flat bottom
■ edge radius
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
This tool has an edge radius, which increases the tool life. Models with toric cut have a large useable depth.
DATRON Double Flute End Mill with Edge Radius
Art. No. D1 D2 L1 L2 R
(mm) (mm) (mm) (mm) (mm)
0068460S 6.0 6.0 50.0 6.0 0.5
0068080K 8.0 8.0 50.0 12.0 1.0
0068442 12.0 6.0 50.0 6.0 0.5
0068443 14.0 8.0 50.0 6.0 0.5
0068444 20.0 8.0 50.0 8.0 0.5
0068442S Regrinding service starting at 12 mm for more than 5 pieces (per piece)
0068443S Regrinding service starting at 14 mm for more than 5 pieces (per piece)
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
29
D1R
L2
D1
D2
L2
Bemaßung
L2
L1
DA
TR
ON
Do
ub
le F
lute
En
d M
ill2flutes
SC25°
DIN 6535Form HA r
Acrylic Plastic
DATRON Double Flute End Mill with Edge Radius and Polished Flute
■ Micrograin solid carbide end mill
■ with double flute and flat bottom
■ edge radius
■ 25° upcut spiral
■ shank without clamping surface DIN 6535-HA
■ with polished cutting edge
The advanced face geometry of these face end mills, in conjunc-tion with a polishing cut allows transparent results when face milling acrylic materials.
Art. No. D1 D2 L1 L2 R
(mm) (mm) (mm) (mm) (mm)
0078440 10.0 6.0 50.0 6.0 1.0
0078442 12.0 6.0 50.0 6.0 1.0
0078444 14.0 8.0 50.0 6.0 1.0
0078446 16.0 8.0 50.0 6.0 1.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
30
L2
D1R D1
D2
L1
L2
L3
D3
DA
TR
ON
Do
ub
le F
lute
En
d M
ill 2flutes
SC25°
DIN 6535Form HA r
Aluminium Gold Plastic
Copper Brass
Art. No. D1 D2 D3 L1 L2 L3 BS R
(mm) (mm) (mm) (mm) (mm) (mm) CT (mm)
00781043 3.0 3.0 2.7 50.0 4.0 14.0 x 0.3
00781063 3.0 3.0 2.7 50.0 4.0 14.0 x 1.0
00781044 4.0 4.0 3.7 50.0 5.0 16.0 x 0.4
00781064 4.0 4.0 3.7 50.0 5.0 16.0 x 1.0
00781045 5.0 5.0 4.6 54.0 6.0 18.0 x 0.5
00781065 5.0 5.0 4.6 54.0 6.0 18.0 x 1.0
0068460F 6.0 6.0 5.8 60.0 7.0 21.0 1.0
00781046 6.0 6.0 5.5 58.0 7.0 21.0 x 0.5
00781066 6.0 6.0 5.5 58.0 7.0 21.0 x 1.0
0068080 8.0 8.0 7.8 60.0 9.0 23.0 1.0
00781048 8.0 8.0 7.4 63.0 9.0 27.0 x 0.5
00781068 8.0 8.0 7.4 63.0 9.0 27.0 x 1.0
00781050 10.0 10.0 9.2 72.0 11.0 32.0 x 0.5
00781070 10.0 10.0 9.2 72.0 11.0 32.0 x 1.0
■ Micrograin solid carbide end mill
■ with double flute and flat bottom
■ edge radius
■ 25° upcut spiral
■ shank without clamping surface DIN 6535-HA
■ toric cut
This tool has an edge radius, which increases the tool life. Models with toric cut have a large useable depth.
CT = BALINIT® ALCRONA Coating
DATRON Double Flute End Mill with Edge Radius
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
31
D1
D2
L1
L2
DA
TR
ON
Do
ub
le F
lute
En
d M
ill2flutes
SC30°
DIN 6535Form HA
Aluminium Gold Plastic
Copper Brass
■ Micrograin solid carbide end mill
■ with two flutes and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
With stepped double flute end mills, the cutting edge diameter is considerably larger than the shaft diameter. This tool is ideally suited for milling over. With high feed rates and low infeed, large surfaces can be milled over in a short time. Due to the sharp-edged corners, it is also possible to perform contour machining.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0078806 6.0 6.0 60.0 10.0
0068441 8.0 6.0 50.0 10.0
0078808 8.0 8.0 60.0 10.0
0078808R 8.0 8.0 60.0 12.0
0068440 10.0 6.0 50.0 10.0
0078810 10.0 10.0 50.0 10.0
0078810L 10.0 10.0 70.0 17.0
0068083 10.0 10.0 100.0 40.0
0068442G 12.0 6.0 50.0 6.0
0078812A 12.0 10.0 50.0 10.0
0078812 12.0 12.0 50.0 10.0
0078812L 12.0 12.0 50.0 20.0
0078812B 12.0 12.0 60.0 30.0
0068442A 14.0 6.0 50.0 6.0
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068443G 14.0 8.0 50.0 6.0
0078814A 14.0 10.0 50.0 10.0
0078814 14.0 12.0 50.0 10.0
0078816A 16.0 10.0 50.0 10.0
0078816B 16.0 10.0 80.0 12.0
0078816C 16.0 10.0 125.0 10.0
0078816 16.0 12.0 50.0 10.0
0078818A 18.0 10.0 50.0 10.0
0078818B 18.0 10.0 125.0 10.0
0078818 18.0 12.0 50.0 10.0
0068444G 20.0 8.0 50.0 8.0
0078820A 20.0 10.0 50.0 10.0
0078820 20.0 12.0 50.0 10.0
DATRON Double Flute End Mill, Stepped
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
32
L2
D1 D1
D2
D3
L1
L2
L3
DA
TR
ON
Do
ub
le F
lute
En
d M
ill 2flutes
SC30°
DIN 6535Form HA
Aluminium Gold Plastic
Copper Brass
■ Micrograin solid carbide end mill
■ with two flutes and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
■ toric cut
The shank´s toric cut permits deeper machining.
DATRON Double Flute End Mill with Toric Cut
Art. No. D1 D2 D3 L1 L2 L3
(mm) (mm) (mm) (mm) (mm) (mm)
00781005 0.5 3.0 0.45 40.0 0.75 4.0
00781006 0.6 3.0 0.55 40.0 0.90 4.0
00781007 0.7 3.0 0.65 40.0 1.05 4.0
00781008 0.8 3.0 0.75 40.0 1.20 6.0
00781009 0.9 3.0 0.85 40.0 1.30 6.0
00781010 1.0 3.0 0.95 40.0 1.50 6.0
00781011 1.0 3.0 0.95 40.0 1.50 9.0
00781012 1.2 3.0 1.15 40.0 1.80 9.0
00781015 1.5 3.0 1.45 40.0 2.2 9.0
00781020 2.0 3.0 1.95 40.0 3.0 12.0
00781025 2.5 3.0 2,40 40.0 3.5 15.0
00781034 4.0 6.0 3.80 50.0 8.0 16.0
00781035 6.0 6.0 5.60 125.0 20 105.0
00781036 6.0 6.0 5.70 60.0 20.0 33.0
00781001 10.0 10.0 9.40 125.0 20.0 105.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
33
D1
D2
L1
L2
DA
TR
ON
Do
ub
le F
lute
En
d M
ill2flutes
SC45°
DIN 6535Form HA
Aluminium Gold Plastic
Copper Brass
DATRON Double Flute End Mill, Contour Milling
■ Micrograin solid carbide end mill
■ with two flutes and flat bottom
■ 45° upcut spiral
■ shank without clamping surface DIN 6535-HA
Thanks to the 45° upcut spiral these tools are specially suited for the machining of contours.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068033 3.0 6.0 57.0 8.0
0068034 4.0 6.0 57.0 11.0
0068035 5.0 6.0 57.0 13.0
0068036 6.0 6.0 57.0 13.0
0068040 8.0 8.0 60.0 20.0
0068041 8.0 8.0 60.0 25.0
0068042 10.0 10.0 70.0 25.0
0068043 12.0 12.0 70.0 25.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
34
D1
D2
L1
L2
DA
TR
ON
Do
ub
le F
lute
En
d M
ill 2flutes
SC15°
DIN 6535Form HA
Aluminium Plastic Copper
Brass
■ Micrograin solid carbide end mill
■ with two flutes and flat bottom
■ 15° upcut spiral
■ shank without clamping surface DIN 6535-HA
The special feature of this mill is the steep upcut angle. The chips are removed very quickly from the work piece. In many cases this results in extremely high feed rates.
DATRON Double Flute End Mill, HSC+
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068815A 1.5 3.0 40.0 6.0
0068815 1.5 3.175 40.0 6.0
0068866 1.9 6.0 50.0 6.0
0068820A 2.0 3.0 40.0 6.0
0068820 2.0 3.175 40.0 6.0
0068862K 2.0 6.0 50.0 4.0
0068862 2.0 6.0 50.0 6.0
0068824 2.4 3.175 40.0 8.0
0068867 2.4 6.0 50.0 5.0
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068830A 3.0 3.0 40.0 10.0
0068830K 3.0 3.175 40.0 6.0
0068830 3.0 3.175 40.0 10.0
0068863K 3.0 6.0 50.0 6.0
0068863 3.0 6.0 50.0 10.0
0068864 4.0 6.0 50.0 8.0
0068865 5.0 6.0 50.0 10.0
0068860K 6.0 6.0 50.0 7.0
0068860 6.0 6.0 50.0 12.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
35
D1
L2
D1
D2
L1
L2
DA
TR
ON
Do
ub
le F
lute
En
d M
ill2flutes
SC30°
DIN 6535Form HA
Copper Brass Steel
■ Micrograin solid carbide end mill
■ with two flutes and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
The cutting geometry of these micro tools is designed for Steel machining. In combination with the standard BALINIT® X.CEED coating, these tools have a high tool life and provide excellent surface quality.
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0078009K 0.9 3.0 38.0 1.8 x
0078010K 1.0 3.0 38.0 2.0 x
0078011K 1.1 3.0 38.0 2.2 x
0078012K 1.2 3.0 38.0 2.4 x
0078013K 1.3 3.0 38.0 2.6 x
0078014K 1.4 3.0 38.0 2.8 x
0078015K 1.5 3.0 38.0 3.0 x
0078016K 1.6 3.0 38.0 3.2 x
0078017K 1.7 3.0 38.0 3.4 x
0078018K 1.8 3.0 38.0 3.6 x
0078019K 1.9 3.0 38.0 4.0 x
0078020K 2.0 3.0 38.0 6.0 x
0078021K 2.1 3.0 38.0 5.0 x
0078022K 2.2 3.0 38.0 5.0 x
0078023K 2.3 3.0 38.0 5.0 x
0078024K 2.4 3.0 38.0 5.0 x
0078025K 2.5 3.0 38.0 7.0 x
0078030K 3.0 3.0 38.0 7.0 x
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0078009S 0.9 3.0 38.0 1.1 x
0078010S 1.0 3.0 38.0 1.2 x
0078011S 1.1 3.0 38.0 1.2 x
0078012S 1.2 3.0 38.0 1.2 x
0078013S 1.3 3.0 38.0 1.2 x
0078014S 1.4 3.0 38.0 1.4 x
0078015S 1.5 3.0 38.0 1.4 x
0078016S 1.6 3.0 38.0 1.4 x
0078017S 1.7 3.0 38.0 1.4 x
0078018S 1.8 3.0 38.0 1.5 x
0078019S 1.9 3.0 38.0 1.5 x
0078020S 2.0 3.0 38.0 1.8 x
0078025S 2.5 3.0 38.0 2.0 x
DATRON Double Flute End Mill for Steel Machining
CT = BALINIT® X.CEED Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
36
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
37
DA
TR
ON
Th
ree,
Fo
ur,
and
Six
Flu
te E
nd
Mill
Whether with three, four or six cutting edges – all DATRON tools developed for Steel machining have a stable cutting geometry and heavy-duty coatings.
Copper
Brass
Steel
DATRON Three, Four, and Six Flute End Mill
37
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
38
D1
D2
L1
L2
DA
TR
ON
Th
ree,
Fo
ur,
and
Six
Flu
te E
nd
Mill
3flutes
SC30°
DIN 6535Form HA
Brass Steel
DATRON Triple Flute End Mill
■ Micrograin solid carbide end mill
■ with three flutes
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
This SC end mill has a very short flute length and a special coa-ting, which results in a very long tool life.
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0068551 1.75 3.0 40.0 3.0 x
0068552 2.0 6.0 50.0 6.0 x
0068553 3.0 6.0 50.0 6.0 x
0068554 4.0 6.0 50.0 8.0 x
0068555 5.0 6.0 50.0 10.0 x
0068556 6.0 6.0 50.0 10.0 x
CT = BALINIT® X.CEED Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
39
D1
D2
L1
L2
L3
D3
DA
TR
ON
Th
ree,
Fo
ur,
and
Six
Flu
te E
nd
Mill
3flutes
SC45°
DIN 6535Form HB
Aluminium Copper Brass
Art. No. D1 D2 D3 L1 L2 L3
(mm) (mm) (mm) (mm) (mm) (mm)
0068033A 3.0 6.0 2.8 58.0 8.0 12.00
0068034A 4.0 6.0 3.8 58.0 11.0 16.00
0068035A 5.0 6.0 4.8 58.0 13.0 19.00
0068036A 6.0 6.0 5.7 58.0 13.0 19.00
0068040A 8.0 8.0 7.8 63.0 19.0 27.00
0068042A 10.0 10.0 9.8 72.0 22.0 32.00
0068043A 12.0 12.0 11.8 83.0 26.0 38.00
■ Micrograin solid carbide end mill
■ with three flutes and flat bottom
■ 45° upcut spiral
■ shank with clamping surface DIN 6535-HB
■ centre cut with one long flute
Thanks to the toric cut these tools are specially suited for the machining without interfering contour.
DATRON Triple Flute End Mill with Toric Cut
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
40
DA
TR
ON
Th
ree,
Fo
ur,
and
Six
Flu
te E
nd
Mill
3flutes
SC30°
DIN 6535Form HA
Foam
D1
D2
L1
L2
L3
D3
DATRON Triple Flute End Mill with Toric Cut for PU Foam
■ Micrograin solid carbide end mill
■ with three flutes and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HB
■ centre cut with one long flute
■ with polished cutting edge
The new foam mills, besides having finely polished cutters also feature chip channels adjusted for PU foam machining. In addi-tion, DATRON especially perfected the special blade geometries and helix angles of the foam tool series.
Art. No. D1 D2 D3 L1 L2 L3
(mm) (mm) (mm) (mm) (mm) (mm)
00680530 3.00 6.00 2.70 75.00 12.00 41.00
0068053K 3.00 6.00 2.70 50.00 6.00 22.00
00680540 4.00 6.00 3.60 75.00 15.00 41.00
0068054K 4.00 6.00 3.60 50.00 8.00 22.00
00680550 5.00 6.00 4.50 75.00 20.00 41.00
0068055K 5.00 6.00 4.50 50.00 10.00 22.00
00680560 6.00 6.00 5.50 75.00 27.00 42.00
0068056A 6.00 6.00 5.50 100.00 27.00 71.00
0068056K 6.00 6.00 5.50 50.00 12.00 22.00
00680580 8.00 8.00 7.50 75.00 28.00 42.00
0068058A 8.00 8.00 7.50 100.00 42.00 71.00
0068058K 8.00 8.00 7.50 50.00 16.00 25.00
00680510 10.00 10.00 9.50 115.00 52.00 82.00
0068051K 10.00 10.00 9.50 60.00 20.00 30.00
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
41
DA
TR
ON
Th
ree,
Fo
ur,
and
Six
Flu
te E
nd
Mill
3flutes
SC30°
DIN 6535Form HA
Copper
D1
D2
L1
L2
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
00685903 3.00 6.00 50.00 6.00
00685906 6.00 6.00 50.00 12.00
00685908 8.00 8.00 50.00 16.00
00685910 10.00 10.00 60.00 22.00
■ Micrograin solid carbide end mill
■ with three flutes and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HB
■ centre cut with one long flute
■ Ground-in chip cutter
Due to the three flutes with ground-in chip cutter, very high feed rates are possible with the corresponding depth adjustment. Copper is machined almost burr free.
DATRON Triple Flute End Mill, Copper Roughing Mill
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
42
D1
D2
L1
L2
DA
TR
ON
Th
ree,
Fo
ur,
and
Six
Flu
te E
nd
Mill
3flutes
SC30°
DIN 6535Form HA
Copper
DATRON Triple Flute End Mill, Smoothing Mill for Copper
■ Micrograin solid carbide end mill
■ with three flutes and flat bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HB
■ centre cut with one long flute
Due to the three flutes with a special clearance angle geometry an extremely good workpiece surface quality is achieved in the finishing process.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
00685610 1.00 6.00 50.00 2.20
00685615 1.50 6.00 50.00 3.20
00685620 2.00 6.00 50.00 4.20
00685630 3.00 6.00 50.00 6.00
00685640 4.00 6.00 50.00 8.00
00685660 6.00 6.00 50.00 11.00
00685680 8.00 8.00 50.00 16.00
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
43
D1
D2
L1
L2
DA
TR
ON
Th
ree,
Fo
ur,
and
Six
Flu
te E
nd
Mill
4flutes
SC30°
DIN 6535Form HB
Copper Brass Steel
DATRON Four Flute End Mill
■ Micrograin solid carbide end mill
■ with four flutes
■ 30° upcut spiral
■ shank with clamping surface DIN 6535-HB
■ centre cut
The four-flute end mill is available in two versions. With a very short flute for even more stability and with a long flute for thick materials machining. Due to their standard BALINIT® ALCRONA coating, these tools achieve very high durability even when machining hard materials.
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0078402 2.0 6.0 50.0 7.0 x
00784025 2.5 6.0 50.0 8.0 x
0078403 3.0 6.0 58.0 8.0 x
0078403A 3.0 6.0 57.0 19.0 x
00784035 3.5 6.0 58.0 10.0 x
0078404 4.0 6.0 58.0 11.0 x
0078404A 4.0 6.0 57.0 19.0 x
0078404B 4.0 6.0 75.0 25.0 x
00784045 4.5 6.0 58.0 11.0 x
0078405 5.0 6.0 58.0 13.0 x
0078405A 5.0 6.0 75.0 30.0 x
00784055 5.5 6.0 58.0 13.0 x
0078406 6.0 6.0 58.0 13.0 x
0078406A 6.0 6.0 75.0 30.0 x
0078406B 6.0 6.0 100.0 40.0 x
00784065 6.5 8.0 63.0 16.0 x
0078407 7.0 8.0 63.0 16.0 x
0078408 8.0 8.0 63.0 18.0 x
0078408A 8.0 8.0 75.0 30.0 x
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0078409 9.0 10.0 72.0 19.0 x
0078410 10.0 10.0 72.0 22.0 x
0078410A 10.0 10.0 75.0 30.0 x
0078410B 10.0 10.0 100.0 40.0 x
0078412 12.0 12.0 83.0 26.0 x
0078412A 12.0 12.0 100.0 45.0 x
0078412B 12.0 12.0 150.0 65.0 x
0078414 14.0 14.0 83.0 26.0 x
0078414A 14.0 14.0 100.0 45.0 x
0078416 16.0 16.0 92.0 32.0 x
0078416A 16.0 16.0 100.0 45.0 x
0078416B 16.0 16.0 150.0 65.0 x
0078418 18.0 18.0 92.0 32.0 x
0078418A 18.0 18.0 100.0 45.0 x
0078420 20.0 20.0 104.0 38.0 x
0078420A 20.0 20.0 100.0 45.0 x
0078420B 20.0 20.0 150.0 65.0 x
CT = BALINIT® ALCRONA Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
44
L2
R D1
D2
L1
L2
D3
L3
DA
TR
ON
Th
ree,
Fo
ur,
and
Six
Flu
te E
nd
Mill
4flutes
SC30°
DIN 6535Form HA r
Copper Brass Steel
DATRON Four Flute End Mill with Edge Radius
■ Micrograin solid carbide end mill
■ with four flutes
■ 30° upcut spiral
■ edge radius
■ shank without clamping surface DIN 6535-HA
■ centre cut
■ toric cut
The special characteristics of this end mill are the rounded edges and the standard toric cut. These tools have a special BALINIT® X.CEED coating.
Art. No. D1 D2 D3 L1 L2 L3 R CT
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
0078620 2.0 6.0 1.8 50.0 4.0 12.0 0.2 x
0078620A 2.0 6.0 1.8 50.0 4.0 16.0 0.2 x
0078623 3.0 6.0 2.7 50.0 4.0 14.0 0.3 x
0078623A 3.0 6.0 2.7 50.0 4.0 18.0 0.3 x
0078624 4.0 6.0 3.7 50.0 5.0 16.0 0.4 x
0078625 5.0 6.0 4.6 54.0 6.0 18.0 0.5 x
0078625A 5.0 6.0 4.6 54.0 6.0 18.0 1.0 x
0078626 6.0 6.0 5.5 57.0 7.0 21.0 0.5 x
0078626A 6.0 6.0 5.5 57.0 7.0 21.0 1.0 x
0078628 8.0 8.0 7.4 63.0 9.0 27.0 0.5 x
0078628A 8.0 8.0 7.4 63.0 9.0 27.0 1.0 x
0078630 10.0 10.0 9.2 72.0 11.0 32.0 0.5 x
0078630A 10.0 10.0 9.2 72.0 11.0 32.0 1.0 x
CT = BALINIT® X.CEED Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
45
D1
D2
L1
L2
DA
TR
ON
Th
ree,
Fo
ur,
and
Six
Flu
te E
nd
Mill
4flutes
SC38°35°/
DIN 6535Form HB
Copper Brass Steel
DATRON Four Flute End Mill, Pitch 35°/38°
■ Micrograin solid carbide end mill
■ with four flutes
■ 35°/38° upcut spiral
■ shank with clamping surface DIN 6535-HB
■ centre cut with two long front side flutes
Due to its different helical pitch, this milling tool runs extremely smoothly and chips are removed very quickly. As standard these tools are supplied with an BALINIT® ALCRONA coating.
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0078456 6.0 6.0 54.0 10.0 x
0078456A 6.0 6.0 57.0 13.0 x
0078458 8.0 8.0 58.0 12.0 x
0078458A 8.0 8.0 63.0 19.0 x
0078460 10.0 10.0 66.0 14.0 x
0078460A 10.0 10.0 72.0 22.0 x
0078460B 12.0 12.0 73.0 16.0 x
0078460C 12.0 12.0 83.0 26.0 x
CT = BALINIT® ALCRONA Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
46
DA
TR
ON
Th
ree,
Fo
ur,
and
Six
Flu
te E
nd
Mill
D1
D2
L1
L2
4flutes
SC25°
DIN 6535Form HB
Copper Brass Steel
DATRON Four Flute End Mill, Roughing Mill
■ Micrograin solid carbide end mill
■ with four flutes
■ 25° upcut spiral
■ shank with clamping surface DIN 6535-HB
■ centre cut with two long front side flutes
The roughing end mill is available in two versions. With a very short flute for even more stability and with a long flute for thick materials machining. Due to their standard BALINIT® X.CEED coating and the special cutting geometry, these tools achieve very high durability even when machining hard materials.
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0078474 4.0 6.0 54.0 8.0 x
0078474A 4.0 6.0 57.0 8.0 x
0078475 5.0 6.0 54.0 8.0 x
0078475A 5.0 6.0 57.0 10.0 x
0078476 6.0 6.0 54.0 8.0 x
0078476A 6.0 6.0 57.0 13.0 x
0078478 8.0 8.0 58.0 11.0 x
0078478A 8.0 8.0 63.0 19.0 x
0078480 10.0 10.0 66.0 13.0 x
0078480A 10.0 10.0 72.0 22.0 x
0078482 12.0 12.0 73.0 16.0 x
0078482A 12.0 12.0 83.0 26.0 x
CT = BALINIT® X.CEED Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
47
D1R
D2
L1
L2
DA
TR
ON
Th
ree,
Fo
ur,
and
Six
Flu
te E
nd
Mill
6flutes
SC50°
DIN 6535Form HA
Steel
DATRON Six Flute End Mill
■ Micrograin solid carbide end mill
■ with six flutes
■ 50° upcut spiral
■ radial under cut
■ shank without clamping surface DIN 6535-HA
■ without centre cut
■ partly with edge radius
This end mill has a very short flute length and a special coating, which results in a very long tool life.
Art. No. D1 D2 L1 L2 CT R
(mm) (mm) (mm) (mm) (mm)
0078605 5.0 6.0 57.0 13.0 x
0078606 6.0 6.0 57.0 13.0 x
0078606A 6.0 6.0 57.0 13.0 x 1.0
0078608 8.0 8.0 63.0 16.0 x
0078608A 8.0 8.0 63.0 16.0 x 1.0
0078610 10.0 10.0 72.0 19.0 x
0078610A 10.0 10.0 72.0 19.0 x 1.5
0078612 12.0 12.0 83.0 22.0 x
0078612A 12.0 12.0 83.0 22.0 x 1.5
0078614 14.0 14.0 83.0 22.0 x
CT = BALINIT® X.CEED Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
48
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
49
DA
TR
ON
Mic
ro-T
oo
thed
En
d M
ill
Abrasive materials, such as CRP, GRP or printed circuit board material, can be reliably machined at low cost with the micro-toothed end mills from DATRON.
GRP
PCB
CRP
Laminate
DATRON Micro-Toothed End Mill
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
50
DA
TR
ON
Mic
ro-T
oo
thed
En
d M
ill
8flutes
SC
DIN 6535Form HA
FR-4FR-4 GRPGRP Laminate
D1
D2
L1
L2
DATRON Micro-Toothed End Mill
■ Micrograin solid carbide end mill
■ micro-toothed
■ fish tail-grinded bottom
■ shank without clamping surface DIN 6535-HA
These tools are highly suitable for machining printed circuit boards or test adapters.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068106 0.6 3.0 40.0 3.0
00686506 0.6 3.175 40.0 3.0
0068107 0.7 3.0 40.0 3.5
0068108 0.8 3.0 40.0 5.0
00686508 0.8 3.175 40.0 5.0
0068110 1.0 3.0 40.0 5.0
00686510 1.0 3.175 40.0 5.0
0068111 1.1 3.0 38.0 5.0
00686511 1.1 3.175 38.0 7.0
0068112 1.2 3.0 40.0 5.0
00686512 1.2 3.175 40.0 5.0
00686513 1.3 3.175 38.0 7.0
00686514 1.4 3.175 38.0 7.0
0068115 1.5 3.0 40.0 8.0
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
00686515 1.5 3.175 40.0 8.0
00686516 1.6 3.175 38.0 8.5
00686517 1.7 3.175 38.0 8.5
00686518 1.8 3.175 38.0 8.5
00686519 1.9 3.175 38.0 8.5
0068120 2.0 3.0 40.0 8.0
00686520 2.0 3.175 40.0 8.0
00686521 2.1 3.175 38.0 9.0
00686522 2.2 3.175 38.0 9.0
00686523 2.3 3.175 38.0 9.0
0068124 2.4 3.0 40.0 8.0
00686524 2.4 3.175 40.0 8.0
0068130 3.0 3.0 40.0 12.0
00686530 3.0 3.175 40.0 10.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
51
DA
TR
ON
Mic
ro-T
oo
thed
En
d M
ill
8flutes
SC
DIN 6535Form HA
FR-4FR-4 GRPGRP Laminate
D1
D2
L1
L2
Bemaßung
L2
DATRON Micro-Toothed End Mill, Coated
■ Micrograin solid carbide end mill
■ micro-toothed
■ fish tail-grinded bottom
■ shank without clamping surface DIN 6535-HA
■ BALINIT® X.CEED Coating/Diamond Coating
Due to micro-toothing and coating, these tools have a high tool life even with extremely abrasive materials.
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
006T106 0.6 3.0 40.0 3.0 BALINIT® X.CEED
006T107 0.7 3.0 40.0 3.5 BALINIT® X.CEED
006T110 1.0 3.0 40.0 5.0 BALINIT® X.CEED
006T115 1.5 3.0 40.0 8.0 BALINIT® X.CEED
006T120 2.0 3.0 40.0 8.0 BALINIT® X.CEED
006T124 2.4 3.0 40.0 8.0 BALINIT® X.CEED
006T130 3.0 3.0 40.0 12.0 BALINIT® X.CEED
0068164 4.0 6.0 50.0 16.0 BALINIT® X.CEED
0068165 5.0 6.0 50.0 22.0 BALINIT® X.CEED
0068166S 6.0 6.0 50.0 12.0 BALINIT® X.CEED
CT = BALINIT® X.CEED Coating/Diamond Coating
Art. No. D1 D2 L1 L2 CT
(mm) (mm) (mm) (mm)
0073126B 2.0 3.175 40.0 9.0 Diamond
0073126C 2.4 3.175 40.0 9.0 Diamond
0073126D 3.0 3.175 40.0 9.0 Diamond
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
52
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
53
Reliable drilling from a diameter of 0.1 mm. Thread milling in a flash from M1.0. Innovative milling thread mill: core hole drilling and thread milling with only one tool, in a single work step.
Gold
Silver
Copper
Brass
Plastic
Aluminium
DATRON Drill and Thread Mill
Wood
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
54
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
2flutes
SC30°
DIN 6535Form HA
130°
Aluminium Wood Plastic
Copper Brass
D1
D2
L1
L2
■ Micrograin solid carbide drill
■ with 130° point angle
■ shank without clamping surface DIN 6535-HA
DATRON Drill, 3 mm Shank
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
00682015 0.15 3.0 40.0 2.0
0068202 0.2 3.0 40.0 3.5
00682025 0.25 3.0 40.0 3.5
0068203 0.3 3.0 40.0 3.5
00682035 0.35 3.0 40.0 3.5
0068204 0.4 3.0 40.0 6.0
00682045 0.45 3.0 40.0 6.0
0068205 0.5 3.0 40.0 6.0
00682055 0.55 3.0 40.0 6.0
0068206 0.6 3.0 40.0 6.5
00682065 0.65 3.0 40.0 6.5
0068207 0.7 3.0 40.0 10.5
00682075 0.75 3.0 40.0 10.5
0068208 0.8 3.0 40.0 10.5
00682085 0.85 3.0 40.0 10.5
0068209 0.9 3.0 40.0 10.5
00682095 0.95 3.0 40.0 10.5
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068210 1.0 3.0 40.0 10.5
00682105 1.05 3.0 40.0 10.5
0068211 1.1 3.0 40.0 10.5
00682115 1.15 3.0 40.0 10.5
0068212 1.2 3.0 40.0 10.5
00682125 1.25 3.0 40.0 10.5
0068213 1.3 3.0 40.0 10.5
00682135 1.35 3.0 40.0 10.5
0068214 1.4 3.0 40.0 10.5
00682145 1.45 3.0 40.0 10.5
0068215 1.5 3.0 40.0 10.5
00682155 1.55 3.0 40.0 10.5
0068216 1.6 3.0 40.0 10.5
00682165 1.65 3.0 40.0 10.5
0068217 1.7 3.0 40.0 10.5
00682175 1.75 3.0 40.0 10.5
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
55
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
2flutes
SC30°
DIN 6535Form HA
130°
Aluminium Wood Plastic
Copper Brass
D1
D2
L1
L2
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068218 1.8 3.0 40.0 10.5
00682185 1.85 3.0 40.0 10.5
0068219 1.9 3.0 40.0 10.5
00682195 1.95 3.0 40.0 10.5
0068220 2.0 3.0 40.0 10.5
00682205 2.05 3.0 40.0 10.5
0068221 2.1 3.0 40.0 10.5
00682215 2.15 3.0 40.0 10.5
0068222 2.2 3.0 40.0 10.5
00682225 2.25 3.0 40.0 10.5
0068223 2.3 3.0 40.0 10.5
00682235 2.35 3.0 40.0 10.5
0068224 2.4 3.0 40.0 10.5
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
00682245 2.45 3.0 40.0 10.5
0068225 2.5 3.0 40.0 10.5
00682255 2.55 3.0 40.0 10.5
0068226 2.6 3.0 40.0 10.5
00682265 2.65 3.0 40.0 10.5
0068227 2.7 3.0 40.0 10.5
00682275 2.75 3.0 40.0 10.5
0068228 2.8 3.0 40.0 10.5
00682285 2.85 3.0 40.0 10.5
0068229 2.9 3.0 40.0 10.5
00682295 2.95 3.0 40.0 10.5
0068230 3.0 3.0 40.0 10.5
■ Micrograin solid carbide drill
■ with 130° point angle
■ shank without clamping surface DIN 6535-HA
DATRON Drill, 3 mm Shank
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
56
D1
D2
L1
L2
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
2flutes
SC30°
DIN 6535Form HA
165°
Aluminium Wood Plastic
Copper Brass
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068231 3.1 3.0 40.0 12.0
0068232 3.2 3.0 40.0 12.0
0068233 3.3 3.0 40.0 12.0
0068234 3.4 3.0 40.0 12.0
0068235 3.5 3.0 40.0 12.0
0068236 3.6 3.0 40.0 12.0
0068237 3.7 3.0 40.0 12.0
0068238 3.8 3.0 40.0 12.0
0068239 3.9 3.0 40.0 12.0
0068240 4.0 3.0 40.0 12.0
0068241 4.1 3.0 40.0 12.0
0068242 4.2 3.0 40.0 12.0
0068243 4.3 3.0 40.0 12.0
0068244 4.4 3.0 40.0 12.0
0068245 4.5 3.0 40.0 12.0
0068246 4.6 3.0 40.0 12.0
0068247 4.7 3.0 40.0 12.0
0068248 4.8 3.0 40.0 12.0
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068249 4.9 3.0 40.0 12.0
0068250 5.0 3.0 40.0 12.0
0068251 5.1 3.0 40.0 12.0
0068252 5.2 3.0 40.0 12.0
0068253 5.3 3.0 40.0 12.0
0068254 5.4 3.0 40.0 12.0
0068255 5.5 3.0 40.0 12.0
0068256 5.6 3.0 40.0 12.0
0068257 5.7 3.0 40.0 12.0
0068258 5.8 3.0 40.0 12.0
0068259 5.9 3.0 40.0 12.0
0068260 6.0 3.0 40.0 12.0
0068261 6.1 3.0 40.0 12.0
0068262 6.2 3.0 40.0 12.0
0068263 6.3 3.0 40.0 12.0
0068264 6.4 3.0 40.0 12.0
0068265 6.5 3.0 40.0 12.0
DATRON Drill, 3 mm Shank
■ Micrograin solid carbide drill
■ with 165° point angle
■ shank without clamping surface DIN 6535-HA
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
57
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
D1
D2
L1
L2
2flutes
SC30°
DIN 6535Form HA
130°
Aluminium Wood Plastic
Copper Brass
■ Micrograin solid carbide drill
■ with 130° point angle
■ shank without clamping surface DIN 6535-HA
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068701 0.1 3.175 38.0 1.0
00687015 0.15 3.175 38.0 2.5
0068702 0.2 3.175 38.0 3.2
00687025 0.25 3.175 38.0 3.5
0068703 0.3 3.175 40.0 5.5
00687035 0.35 3.175 38.0 5.5
0068704 0.4 3.175 40.0 5.5
00687045 0.45 3.175 40.0 7.0
0068705 0.5 3.175 40.0 5.5
00687055 0.55 3.175 40.0 5.5
0068706 0.6 3.175 40.0 7.0
00687065 0.65 3.175 40.0 8.5
0068707 0.7 3.175 40.0 10.5
00687075 0.75 3.175 40.0 10.5
0068708 0.8 3.175 40.0 10.5
00687085 0.85 3.175 40.0 10.5
0068709 0.9 3.175 40.0 10.5
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
00687095 0.95 3.175 40.0 10.5
0068710 1.0 3.175 40.0 10.5
00687105 1.05 3.175 40.0 10.5
0068711 1.1 3.175 40.0 10.5
00687115 1.15 3.175 40.0 10.5
0068712 1.2 3.175 40.0 10.5
00687125 1.25 3.175 40.0 10.5
0068713 1.3 3.175 40.0 10.5
00687135 1.35 3.175 40.0 10.5
0068714 1.4 3.175 40.0 10.5
00687145 1.45 3.175 40.0 10.5
0068715 1.5 3.175 40.0 10.5
00687155 1.55 3.175 40.0 10.5
0068716 1.6 3.175 40.0 10.5
00687165 1.65 3.175 40.0 10.5
0068717 1.7 3.175 40.0 10.5
00687175 1.75 3.175 40.0 10.5
DATRON Drill, 1/8” Shank
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
58
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
D1
D2
L1
L2
2flutes
SC30°
DIN 6535Form HA
130°
Aluminium Wood Plastic
Copper Brass
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068718 1.8 3.175 40.0 10.5
00687185 1.85 3.175 40.0 10.5
0068719 1.9 3.175 40.0 10.5
00687195 1.95 3.175 40.0 10.5
0068720 2.0 3.175 40.0 10.5
00687205 2.05 3.175 40.0 10.5
0068721 2.1 3.175 40.0 10.5
00687215 2.15 3.175 40.0 10.5
0068722 2.2 3.175 40.0 10.5
00687225 2.25 3.175 40.0 10.5
0068723 2.3 3.175 40.0 10.5
00687235 2.35 3.175 40.0 10.5
0068724 2.4 3.175 40.0 10.5
00687245 2.45 3.175 40.0 10.5
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068725 2.5 3.175 40.0 10.5
00687255 2.55 3.175 40.0 10.5
0068726 2.6 3.175 40.0 10.5
00687265 2.65 3.175 40.0 10.5
0068727 2.7 3.175 40.0 10.5
00687275 2.75 3.175 40.0 10.5
0068728 2.8 3.175 40.0 10.5
00687285 2.85 3.175 40.0 10.5
0068729 2.9 3.175 40.0 10.5
00687295 2.95 3.175 40.0 10.5
0068730 3.0 3.175 40.0 10.5
00687305 3.05 3.175 40.0 10.5
0068731 3.1 3.175 40.0 10.5
DATRON Drill, 1/8” Shank
■ Micrograin solid carbide drill
■ with 130° point angle
■ shank without clamping surface DIN 6535-HA
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
59
D1
D2
L1
L2
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
2flutes
SC30°
DIN 6535Form HA
165°
Aluminium Wood Plastic
Copper Brass
■ Micrograin solid carbide drill
■ with 165° point angle
■ shank without clamping surface DIN 6535-HA
DATRON Drill, 1/8” Shank
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068732 3.2 3.175 40.0 12.0
0068733 3.3 3.175 40.0 12.0
0068734 3.4 3.175 40.0 12.0
0068735 3.5 3.175 40.0 12.0
0068736 3.6 3.175 40.0 12.0
0068737 3.7 3.175 40.0 12.0
0068738 3.8 3.175 40.0 12.0
0068739 3.9 3.175 40.0 12.0
0068740 4.0 3.175 40.0 12.0
0068741 4.1 3.175 40.0 12.0
0068742 4.2 3.175 40.0 12.0
0068743 4.3 3.175 40.0 12.0
0068744 4.4 3.175 40.0 12.0
0068745 4.5 3.175 40.0 12.0
0068746 4.6 3.175 40.0 12.0
0068747 4.7 3.175 40.0 12.0
0068748 4.8 3.175 40.0 12.0
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068749 4.9 3.175 40.0 12.0
0068750 5.0 3.175 40.0 12.0
0068751 5.1 3.175 40.0 12.0
0068752 5.2 3.175 40.0 12.0
0068753 5.3 3.175 40.0 12.0
0068754 5.4 3.175 40.0 12.0
0068755 5.5 3.175 40.0 12.0
0068756 5.6 3.175 40.0 12.0
0068757 5.7 3.175 40.0 12.0
0068758 5.8 3.175 40.0 12.0
0068759 5.9 3.175 40.0 12.0
0068760 6.0 3.175 40.0 12.0
0068761 6.1 3.175 40.0 12.0
0068762 6.2 3.175 40.0 12.0
0068763 6.3 3.175 40.0 12.0
0068764 6.4 3.175 40.0 12.0
0068765 6.5 3.175 40.0 12.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
60
D1
D2
L1
L2
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
2flutes
SC30°
DIN 6535Form HA
130°
Aluminium Wood Plastic
Copper Brass
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068230L 3.0 6.0 50.0 21.0
0068231L 3.1 6.0 50.0 21.0
0068232L 3.2 6.0 50.0 21.0
0068233L 3.3 6.0 50.0 21.0
0068234L 3.4 6.0 50.0 21.0
0068235L 3.5 6.0 50.0 21.0
0068236L 3.6 6.0 50.0 21.0
0068237L 3.7 6.0 50.0 21.0
0068238L 3.8 6.0 50.0 21.0
0068239L 3.9 6.0 50.0 21.0
0068240L 4.0 6.0 50.0 21.0
0068241L 4.1 6.0 50.0 21.0
0068242L 4.2 6.0 50.0 21.0
0068243L 4.3 6.0 50.0 21.0
0068244L 4.4 6.0 50.0 21.0
0068245L 4.5 6.0 50.0 21.0
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068246L 4.6 6.0 50.0 21.0
0068247L 4.7 6.0 50.0 21.0
0068248L 4.8 6.0 50.0 21.0
0068249L 4.9 6.0 50.0 21.0
0068250L 5.0 6.0 50.0 21.0
0068251L 5.1 6.0 50.0 21.0
0068252L 5.2 6.0 50.0 21.0
0068253L 5.3 6.0 50.0 21.0
0068254L 5.4 6.0 50.0 21.0
0068255L 5.5 6.0 50.0 21.0
0068256L 5.6 6.0 50.0 21.0
0068257L 5.7 6.0 50.0 21.0
0068258L 5.8 6.0 50.0 21.0
0068259L 5.9 6.0 50.0 21.0
0068260L 6.0 6.0 50.0 21.0
DATRON Drill, 6 mm Shank
■ Micrograin solid carbide drill
■ with 130° point angle
■ shank without clamping surface DIN 6535-HA
■ suitable for thick sheet metal material up to 20 mm
DA
TR
ON
Ein
sch
nei
der
- S
ing
le F
lute
En
d M
ill
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
61
2flutes
SC30°
DIN 6535Form HA
130°
Aluminium Wood Plastic
Copper Brass
D1
D2
L1
L2
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
DATRON Drill, 6 mm Shank
■ Micrograin solid carbide drill
■ with 130° point angle
■ shank without clamping surface DIN 6535-HA
■ suitable for thick sheet metal material up to 30 mm
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm)
0068240X 4.0 6.0 60.0 31.0
0068245X 4.5 6.0 60.0 31.0
0068250X 5.0 6.0 60.0 31.0
0068255X 5.5 6.0 60.0 31.0
0068260X 6.0 6.0 60.0 31.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
62
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
Thread Mill Parameters Tool Database
Art. No. Nominal Dia Actual Dia RPM C D3 A/R L2
0068418/L 0.80 0.80 35.000 40 0.49 60 0.09
0068418S 0.95 0.95 35.000 40 0.65 60 0.09
0068419 1.4 1.4 35.000 40 0.8 60 0.1
0068419L 1.4 1.4 30.000 40 0.8 60 0.1
0068419X 1.4 1.4 32.000 40 0.8 60 0.1
0068420 2.0 2.0 35.000 40 1.0 60 0.2
0068420L 2.0 2.0 30.000 40 1.0 60 0.2
0068420X 2.0 2.0 32.000 40 1.0 60 0.2
0068450 6.0 6.0 25.000 40 1.9 55 0.7
0068450A 8.0 8.0 25.000 40 3.0 55 1.55
0068451 4.0 4.08 25.000 40 1.97 60 0.5
0068451A 8.0 8.0 25.000 40 3.0 60 1.6
0068451L 4.0 4.08 22.000 40 1.97 60 0.5
0068451X 4.0 4.08 24.000 40 1.97 60 0.5
0068452 6.0 5.95 25.000 40 2.98 80 1.3
Recommended thread mill parameters in the DATRON tool database
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
63
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
4flutes
SC
DIN 6535Form HA
Aluminium Gold Plastic
Copper Brass
L2 α
D1
D3
L3
D1
D2
L1
L2
DATRON Thread Mill
■ Micrograin solid carbide thread mill
■ with four flutes
■ shank without clamping surface DIN 6535-HA
With this tool, threads from M1.0 onwards can be milled directly with an HF spindle.Threads no longer need to be machined out-side the high-speed milling machine.
Art. No. Thread D1 D2 D3 L1 L2 L3
(mm) (mm) (mm) (mm) (mm) (mm) Degree
0068418 M1.0 - M1.2 0.8 3.0 0.49 40.0 0.09 3.0 60
0068418L M1.0 - M1.2 0.8 3.0 0.49 40.0 0.09 6.0 60
0068418S M1.4 0.95 3.0 0.65 40.0 0.09 3.0 60
0068419 M1.6 - M2.5 1.4 3.0 0.9 40.0 0.1 6.0 60
0068419L M1.6 - M2.5 1.4 3.0 0.9 40.0 0.1 10.0 60
0068419X M1.6 - M2.5 1.4 3.0 0.9 60.0 0.1 6.0 60
0068420 M2.5 - M4 2.0 3.0 1.0 40.0 0.2 8.0 60
0068420L M2.5 - M4 2.0 3.0 1.0 40.0 0.2 12.0 60
0068420X M2.5 - M4 2.0 3.0 1.0 50.0 0.2 8.0 60
0068451 M5 - M10 4.0 6.0 2.0 50.0 0.5 12.0 60
0068451L M5 - M10 4.0 6.0 2.0 50.0 0.5 16.0 60
0068451X M5 - M10 4.0 6.0 2.0 60.0 0.5 30.0 60
0068451A M10 - M36 8.0 6.0 3.0 50.0 1.6 12.0 60
0068450 Whitworth < 1/2” 6.0 6.0 3.0 50.0 0.7 12.0 55
0068450A Whitworth > 1/2” 8.0 6.0 3.0 50.0 1.55 12.0 55
0068452 PG7 - PG48 6.0 6.0 3.0 50.0 1.3 12.0 80
63Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
64
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
Art. No. Nominal Dia Actual Dia RPM C D2 A/R L2
0068419A 2.0 2.0 45.000 40 1.34 60 0.2
0068420A 3.0 3.0 40.000 40 1.97 60 0.3
0046454 6.0 5.95 33.000 40 4.14 80 1.2
0068454A 6.0 5.95 33.000 40 2.75 60 1.2
0068456 4.8 4.6 25.000 40 3.35 60 0.5
0068457 6.0 5.95 25.000 40 4.0 60 0.5
0068458 8.0 7.95 25.000 40 5.4 60 0.5
Milling Thread Mill Parameters Tool Database
Recommended milling thread mill parameters in the DATRON tool database
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
65
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
3flutes
SC
DIN 6535Form HA
Aluminium Plastic Copper
Brass
α
D3
L2
D1
D2
L1
L2
α
L3
■ Micrograin solid carbide milling thread mill
■ with three flutes
■ shank without clamping surface DIN 6535-HA
Specially effective thread milling can be done with the innovative milling thread mill from DATRON. With this tool the centre hole and milling thread can be machined at one time. This special tool is legally protected by a utility patent.
Art. No. Threads D1 D2 D3 L1 L2 L3
(mm) (mm) (mm) (mm) (mm) (mm) Degree
0068419A M2.5 - M3 1.4 3.0 1.4 40.0 1.0 8.0 60
0068420A M4 - M5 2.1 3.0 2.1 40.0 1.0 10.0 60
0068456 M6 3.3 6.0 3.5 50.0 1.3 12.0 60
0068457 M8 - M10 3.9 6.0 4.0 50.0 2.0 12.0 60
0068458 M12 - M16 5.2 6.0 5.4 50.0 2.0 12.0 60
0068454 PG7 - PG 48 4.0 6.0 4.2 50.0 2.5 12.0 80
0068454A metric cable thread 3.9 6.0 4.0 50.0 2.5 12.0 60
DATRON Milling Thread Mill
65Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
66
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
Art. No. Nominal Dia Actual Dia RPM Threads D2 A/R L2
00684503 2.3 2.3 21.200 M3 0 60 0
00684544 3.0 2.98 14.300 M4 0 60 0
00684555 3.8 3.72 12.800 M5 0 60 0
00684566 4.5 4.48 10.850 M6 0 60 0
00684568 6.1 6.0 8.000 M8 0 60 0
Multi Thread Mill Parameters Tool Database
Recommended multi thread mill parameters in the DATRON tool database
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
67
DA
TR
ON
Dri
ll an
d T
hre
ad M
ill
D1
D2
L1
L2
SCDIN 6535Form HA
Aluminium Plastic Copper
Brass
■ Micrograin solid carbide multi thread mill
■ shank without clamping surface DIN 6535-HA
■ with 45° countersink section
The multi-toothing of this tool allows a complete thread cut within one helix. This way, threads can be produced in an opti-mum amount of time and extremely efficiently. The integrated 45° countersink chamfer is for automatic deburring.
DATRON Multi Thread Mill
Art. No. Threads D1 D2 L1 L2
(mm) (mm) (mm) (mm) Degree
00684503 M3 2.3 6.0 50.0 8.0 60
00684504 M4 3.0 6.0 50.0 8.0 60
00684544 M4 3.0 6.0 50.0 12.0 60
00684505 M5 3.8 6.0 50.0 12.0 60
00684555 M5 3.8 6.0 50.0 16.0 60
00684506 M6 4.5 8.0 50.0 12.0 60
00684566 M6 4.5 8.0 50.0 16.0 60
00684508 M8 6.0 10.0 50.0 12.0 60
00684588 M8 6.0 10.0 50.0 16.0 60
67Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
L2
α
45°
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
68
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
69
Especially designed for 3D machining, DATRON’s ball nose end mills are offered in several versions. In addition to one, two and four flute versions, exclusive polished variants as well as micro-versions are available, exclusive from DATRON.
Gold
Silver
Copper
Brass
Plastic
Aluminium
Steel
DATRON Ball Nose End Mill, External Radius End Mill, Slotting Mill and Dovetail Milling Tool
Wood
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
70
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
1flute
SC30°
DIN 6535Form HA
Aluminium Gold Plastic
Copper Brass
D1
D2
L1
L2
Art. No. D1 D2 L1 L2 R
(mm) (mm) (mm) (mm) (mm)
0068171E 1.0 3.0 40.0 4.0 0.5
0068172E 2.0 6.0 50.0 7.0 1.0
0068173E 3.0 6.0 50.0 8.0 1.5
0068174E 4.0 6.0 50.0 10.0 2.0
0068175E 5.0 6.0 50.0 12.0 2.5
0068176E 6.0 6.0 50.0 14.0 3.0
0068178E 8.0 8.0 60.0 14.0 4.0
0068179E 10.0 10.0 60.0 20.0 5.0
■ Micrograin solid carbide end mill
■ with single flute and radius bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
With this specially ground milling tool, with a small flute and ball nose end very outstanding results can be performed with high feed rates in the material. The large chip groove allows for opti-mal chip removal and an excellent surface finish.
DATRON Ball Nose End Mill, One Flute
D1 R
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
71
D1
D2
L1
L2
L3
D3
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
1flute
SC30°
DIN 6535Form HA
Acrylic Plastic
DATRON Ball Nose End Mill, Polished, One Flute
■ Micrograin solid carbide end mill
■ with single flute and radius bottom
■ 30° upcut spiral
■ shank without clamping surface DIN 6535-HA
■ with polished cutting edge
Specially designed for 3D machining of transparent plastics. The extremely sharp cutting geometry with a polishing cut ensures highest-quality surface results, the cutting construction allows still higher material feed rates, which significantly shortens pro-duction times.
Art. No. D1 D2 D3 L1 L2 L3 R
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
0068191E 1.00 6.00 0.95 50.00 4.00 12.00 0.5
0068191S 1.50 6.00 1.45 50.00 5.00 12.00 0.75
0068192E 2.00 6.00 1.95 50.00 6.00 20.00 1.0
0068192S 2.50 6.00 2.45 50.00 7.00 20.00 1.25
0068193E 3.00 6.00 2.95 50.00 8.00 21.00 1.5
0068194E 4.00 6.00 3.95 50.00 10.00 21.00 2.0
0068195E 5.00 6.00 4.95 50.00 12.00 22.00 2.5
0068196E 6.00 6.00 5.95 50.00 14.00 22.00 3.0
D1R
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
72
D1R D1
D2
L1
L2
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
2flutes
SC30°
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
■ Micrograin solid carbide ball nose end mill
■ with two flutes
■ 30° upcut spiral
■ centre cut
■ shank without clamping surface DIN 6535-HA
DATRON Ball Nose End Mill, Double Flute
Art. No. D1 D2 L1 L2 CT R
(mm) (mm) (mm) (mm) (mm)
00684003 0.3 3.0 40.0 0.5 0.15
00684004 0.4 3.0 40.0 1.2 x 0.2
00684005 0.5 3.0 40.0 0.8 0.25
00684010 0.5 3.0 40.0 1.5 x 0.25
00684006 0.6 3.0 40.0 1.8 x 0.3
00684007 0.7 3.0 40.0 2.1 0.35
00684008 0.8 3.0 40.0 2.4 x 0.4
0068400 1.0 3.0 40.0 3.0 0.50
00684015 1.5 3.0 40.0 3.0 x 0.75
0068402 2.0 3.0 40.0 4.0 x 1.0
00684025 2.5 3.0 40.0 5.0 x 1.25
0068401 3.0 3.0 40.0 6.0 x 1.5
0068403 3.0 6.0 50.0 4.0 1.5
0068404 4.0 6.0 50.0 5.0 2.0
0068405 5.0 6.0 50.0 8.0 2.5
0068406 6.0 6.0 50.0 10.0 3.0
0068408 8.0 8.0 50.0 12.0 4.0
CT = BALINIT® ALCRONA Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
73
D1 RD1
D2
L1
L2
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
4flutes
SC30°
DIN 6535Form HB
Copper Steel
■ Micrograin solid carbide ball nose end mill
■ with four flutes
■ 30° upcut spiral
■ centre cut, full radius
■ shank with clamping surface DIN 6535-HB
■ with BALINIT® ALCRONA coating
DATRON Ball Nose End Mill, Four Flutes, Short Version
Art. No. D1 D2 L1 L2 CT R
(mm) (mm) (mm) (mm) (mm)
0078542 2.0 6.0 57.0 6.0 x 1.0
0078543 3.0 6.0 57.0 8.0 x 1.5
0078544 4.0 6.0 57.0 11.0 x 2.0
0078545 5.0 6.0 57.0 13.0 x 2.5
0078546 6.0 6.0 57.0 13.0 x 3.0
0078548 8.0 8.0 63.0 19.0 x 4.0
0078550 10.0 10.0 72.0 22.0 x 5.0
0078552 12.0 12.0 83.0 26.0 x 6.0
0078554 14.0 14.0 83.0 26.0 x 7.0
0078556 16.0 16.0 92.0 32.0 x 8.0
0078558 18.0 18.0 92.0 32.0 x 9.0
0078560 20.0 20.0 104.0 38.0 x 10.0
CT = BALINIT® ALCRONA Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
74
D1 R D1
D2
L1
L2
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
4flutes
SC30°
DIN 6535Form HB
Copper Steel
■ Micrograin solid carbide ball nose end mill
■ with four flutes
■ 30° upcut spiral
■ centre cut, full radius
■ shank with clamping surface DIN 6535-HB
■ with BALINIT® ALCRONA Coating
DATRON Ball Nose End Mill, Four Flutes, Long Version
Art. No. D1 D2 L1 L2 CT R
(mm) (mm) (mm) (mm) (mm)
0078543A 3.0 6.0 57.0 20.0 x 1.5
0078544A 4.0 6.0 57.0 20.0 x 2.0
0078545A 5.0 6.0 75.0 30.0 x 2.5
0078546A 6.0 6.0 75.0 30.0 x 3.0
0078548A 8.0 8.0 75.0 30.0 x 4.0
0078550A 10.0 10.0 75.0 30.0 x 5.0
0078552A 12.0 12.0 100.0 45.0 x 6.0
0078554A 14.0 14.0 100.0 45.0 x 7.0
0078556A 16.0 16.0 100.0 45.0 x 8.0
0078558A 18.0 18.0 100.0 45.0 x 9.0
0078560A 20.0 20.0 100.0 45.0 x 10.0
CT = BALINIT® ALCRONA Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
75
D1 RD1
D2
L1
L2
L3
D3
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
2flutes
SC30°
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
■ Micrograin solid carbide ball nose end mill
■ with two flutes
■ 30° upcut spiral
■ centre cut
■ toric cut
■ shank without clamping surface DIN 6535-HA
Thanks to the toric cut of the shaft the work piece can be machined more deeply.
DATRON Ball Nose End Mill, Two Flutes with Toric Cut
Art. No. D1 D2 D3 L1 L2 L3 R
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
0078502 2.0 6.0 1.8 75.0 5.0 20.0 1.0
0078503 3.0 6.0 2.8 75.0 6.0 20.0 1.5
0078504 4.0 6.0 3.8 75.0 8.0 20.0 2.0
0078505 5.0 6.0 4.8 100.0 20.0 40.0 2.5
0078506 6.0 6.0 5.8 100.0 20.0 40.0 3.0
0078508 8.0 8.0 7.8 100.0 20.0 40.0 4.0
0078510 10.0 10.0 9.8 100.0 20.0 40.0 5.0
0078510A 10.0 10.0 9.8 150.0 20.0 60.0 5.0
0078512 12.0 12.0 11.7 100.0 20.0 40.0 6.0
0078512A 12.0 12.0 11.7 150.0 20.0 60.0 6.0
0078516 16.0 16.0 15.7 150.0 30.0 70.0 8.0
0078518 18.0 18.0 17.7 150.0 30.0 70.0 9.0
0078520 20.0 20.0 19.7 150.0 30.0 80.0 10.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
76
L2
D1R D1
D2
L1
L2
L3
D3
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
2flutes
SC30°
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
■ Micrograin solid carbide ball nose end mill
■ with two flutes
■ 30° upcut spiral
■ centre cut
■ toric cut
■ shank without clamping surface DIN 6535-HA
Thanks to the toric cut of the shaft the work piece can be machined more deeply.
DATRON Micro Ball Nose End Mill with Toric Cut
Art. No. D1 D2 D3 L1 L2 L3 R
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
00782004 0.4 3.0 0.35 40.0 0.60 2 0.2
00782005 0.5 3.0 0.45 40.0 0.75 4 0.25
00782006 0.6 3.0 0.55 40.0 0.90 4 0.3
00782008 0.8 3.0 0.75 40.0 1.20 6 0.4
00782010 1.0 3.0 0.95 40.0 1.50 6 0.5
00782011 1.0 3.0 0.95 40.0 1.50 9 0.5
00782012 1.2 3.0 1.15 40.0 1.80 9 0.6
00782015 1.5 3.0 1.45 40.0 2.20 9 0.75
00782020 2.0 3.0 1.95 40.0 3.0 12 1.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
77
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
D3
D2
L1
L2
2/4flutes
SC
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
DATRON External Radius End Mill
■ Micrograin solid carbide external radius end mill
■ with two flutes or up to four flutes
■ with specially cut edges for the machining of external edges
■ shank without clamping surface DIN 6535-HA
This end mill is specially designed for the optimum machining of external radii.
F = Number of Flutes
Art. No. D1 D2 D3 L1 L2 R F
(mm) (mm) (mm) (mm) (mm) (mm)
0068410 5.0 6.0 6.0 50.0 0.5 0.5 2
0068411 4.0 6.0 6.0 50.0 1.0 1.0 2
00684115 3.0 6.0 6.0 50.0 1.5 1.5 2
0068412 2.0 6.0 6.0 50.0 2.0 2.0 2
00684125 3.0 6.0 8.0 50.0 2.5 2.5 4
0068413 4.0 6.0 10.0 50.0 3.0 3.0 4
00684135 4.0 6.0 11.0 50.0 3.5 3.5 4
0068414 4.0 6.0 12.0 50.0 4.0 4.0 4
00684145 3.0 6.0 12.0 50.0 4.5 4.5 4
0068415 3.0 6.0 13.0 50.0 5.0 5.0 4
0068416 4.0 6.0 16.0 50.0 6.0 6.0 4
D1
R
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
78
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
D3
D2
L1
3flutes
SC
DIN 6535Form HA
Acrylic Plastic
DATRON External Radius End Mill, Polished
■ Micrograin solid carbide external radius end mill
■ with three flutes
■ with specially cut edges for the machining of external edges
■ shank without clamping surface DIN 6535-HA
■ with polished cutting edge
The external radius end mill especially developed for acrylic has an extremely sharp cutting geometry with a polishing cut and is therefore ideally suited for creating transparent edge rounding.
Art. No. D1 D2 D3 L1 L2 R F
(mm) (mm) (mm) (mm) (mm) (mm)
00685710 4.00 6.00 6.00 50.00 1.00 1.00 3
00685715 5.00 6.00 8.00 50.00 1.50 1.50 3
00685720 4.00 6.00 8.00 50.00 2.00 2.00 3
00685725 5.00 6.00 10.00 50.00 2.50 2.50 3
00685730 4.00 6.00 10.00 50.00 3.00 3.00 3
L2
D1R
F = Number of Flutes
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
79
L2
D1R
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
2flutes
SC
DIN 6535Form HA
Aluminium Plastic Copper
Brass Steel
D1
D2
L1
L2
DATRON Deburring End Mill, Two Flutes
■ Micrograin solid carbide external radius end mill
■ with two flutes
■ with specially cut edges for the machining of external edges
■ shank without clamping surface DIN 6535-HA
These outer radius end mills were specifically designed for the automated deburring of counter plate grooves. The tools have a uniform outer radius of 0.3 mm. With face diameters between 0.9 and 2.4 mm all standard counter plate groove widths are covered. The flute geometry optimised for steel machining guar-antees excellent cutting results with excellent durability.
Art. No. D1 D2 L1 L2 R
(mm) (mm) (mm) (mm) (mm)
00784908 0.8 3.0 40.0 0.3 0.3
00784909 0.9 3.0 40.0 0.3 0.3
00784910 1.0 3.0 40.0 0.3 0.3
00784911 1.1 3.0 40.0 0.3 0.3
00784912 1.2 3.0 40.0 0.3 0.3
00784913 1.3 3.0 40.0 0.3 0.3
00784914 1.4 3.0 40.0 0.3 0.3
00784915 1.5 3.0 40.0 0.3 0.3
00784916 1.6 3.0 40.0 0.3 0.3
00784917 1.7 3.0 40.0 0.3 0.3
00784918 1.8 3.0 40.0 0.3 0.3
00784919 1.9 3.0 40.0 0.3 0.3
00784920 2.0 3.0 40.0 0.3 0.3
00784921 2.1 3.0 40.0 0.3 0.3
00784922 2.2 3.0 40.0 0.3 0.3
00784923 2.3 3.0 40.0 0.3 0.3
00784924 2.4 3.0 40.0 0.3 0.3
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
80
D1
D2
L1
D3
L3
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
2/6flutes
SC
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
DATRON T-Slotting Mill
■ Micrograin solid carbide T-slotting mill
■ with two flutes or up to six flutes
■ shank without clamping surface DIN 6535-HA
These special tools allow machining T-slots and lateral slots on contour surfaces. Thus, re-clamping operations can be reduced and production times shortened.
Art. No. D1 D2 D3 L1 L2 L3 F
(mm) (mm) (mm) (mm) (mm) (mm)
0068425 3.0 3.0 1.6 40.0 0.8 6.0 2
0068424D 6.0 6.0 3.0 50.0 2.8 8.0 4
0068424L 8.0 6.0 3.5 50.0 0.7 6.0 4
0068424K 8.0 6.0 3.5 50.0 1.0 6.0 4
0068424 8.0 6.0 3.5 50.0 1.3 6.0 4
0068424S 8.0 6.0 3.5 50.0 4.5 9.0 4
0068424A 8.0 8.0 3.5 50.0 1.3 6.0 4
0068423 10.0 6.0 4.0 50.0 2.0 12.0 4
0068423A 10.0 6.0 4.0 50.0 2.0 12.0 6
0068426 15.0 6.0 6.0 50.0 3.0 25.0 4
F = Number of Flutes
D1
D3
L2
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
81
L2
αD1
D3
D1
D2
L1
L2
L3
DA
TR
ON
Bal
l N
ose
En
d M
ill, E
xter
nal
Rad
ius
En
d M
ill, S
lott
ing
Mill
an
d D
ove
tail
Mill
ing
To
ol
2flutes
SC
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
■ Micrograin solid carbide dovetail milling tool
■ with two flutes
■ shank without clamping surface DIN 6535-HA
The double-edged special milling tools are excellently suited for producing dovetail grooves and rear-side deburring or chamfer-ing of the bottom sides of work pieces.
This minimises reclamping operations and reduces production times.
Art. No. D1 D2 D3 L1 L2 L3
(mm) (mm) (mm) (mm) (mm) (mm) Degree
0068290 3.0 3.0 2.0 40.0 3.0 6.0 5
0068783 3.0 3.0 2.0 40.0 0.87 6.0 30
0068783A 3.0 3.0 2.0 40.0 0.5 6.0 45
0068783B 3.0 3.0 2.0 40.0 0.29 6.0 60
0068690 3.175 3.175 2.0 40.0 3.0 6.0 5
0068784 4.0 6.0 2.0 50.0 1.73 6.0 30
0068784A 4.0 6.0 2.0 50.0 1.0 6.0 45
0068784B 4.0 6.0 2.0 50.0 0.58 6.0 60
0068785 5.0 6.0 2.5 50.0 2.17 6.0 30
0068785A 5.0 6.0 2.5 50.0 1.25 6.0 45
0068785B 5.0 6.0 2.5 50.0 0.72 6.0 60
0068291 6.0 6.0 5.0 50.0 6.0 6.0 5
0068786 6.0 6.0 3.0 50.0 2.6 6.0 30
0068786A 6.0 6.0 3.0 50.0 1.5 6.0 45
0068786B 6.0 6.0 3.0 50.0 0.87 6.0 60
DATRON Dovetail Milling Tool
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
82
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
83
Engraving, deburring and chamfering. Now the DATRON engraving tool is also available as a balanced model and for steel machining.
Gold
Silver
Copper
Brass
Plastic
Aluminium
Steel
DATRON Standard Engraving Tool, Countersink Tool and Cutting Diamond
Wood
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
84
D1
α
D1
D2
L1
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
1flute
SC
DIN 6535Form HA
Aluminium Gold Plastic
Copper Brass Wood
■ Micrograin solid carbide engraving tool
■ with single flute
■ conic tool tip
■ shank without clamping surface DIN 6535-HA
DATRON Standard Engraving Tool
Art. No. D1 D2 L1
(mm) (mm) (mm) Degree
0068278 0.05 3.0 40.0 20
0068279 0.1 3.0 40.0 20
0068679 0.1 3.175 40.0 20
0068270 0.1 4.0 40.0 20
0068279A 0.1 3.0 40.0 30
0068679A 0.1 3.175 40.0 30
0068273 0.1 4.0 40.0 30
0068283 0.1 6.0 50.0 30
0068278A 0.2 3.0 40.0 20
0068279B 0.2 3.0 40.0 30
0068283D 0.2 6.0 50.0 30
0068283E 0.3 6.0 50.0 30
0068283F 0.4 6.0 50.0 30
0068283G 0.6 6.0 50.0 30
0068283L 0.1 6.0 50.0 40
0068280 0.1 3.0 40.0 40
0068680 0.1 3.175 40.0 40
0068274 0.1 4.0 40.0 40
0068280B 0.2 3.0 40.0 40
0068280D 0.5 3.0 40.0 40
0068280A 0.1 3.0 40.0 45
0068284B 0.05 6.0 50.0 20
0068284C 0.1 6.0 50.0 20
Art. No. D1 D2 L1
(mm) (mm) (mm) Degree
0068284D 0.2 6.0 50.0 20
0068284F 0.4 6.0 50.0 20
0068681 0.1 3.175 40.0 60
0068276 0.1 4.0 40.0 60
0068281 0.1 3.0 40.0 60
0068281A 0.2 3.0 40.0 60
0068285 0.1 6.0 50.0 50
0068285A 0.1 6.0 50.0 60
0068285D 0.2 6.0 50.0 60
0068285E 0.3 6.0 50.0 60
0068285F 0.4 6.0 50.0 60
0068282 0.1 3.0 40.0 90
0068682 0.1 3.175 40.0 90
0068277 0.1 4.0 40.0 90
0068286 0.1 6.0 50.0 90
0068286G* 0.1 6.0 50.0 90
0068287 0.1 6.0 50.0 120
0068284 3.0 3.0 40.0 180
0068288 6.0 6.0 50.0 180
0068293 Regrind service* 3.0 40.0
0068296 Regrind service* 6.0 50.0
0068298 Diamond hand lap
* Minimum 20 pieces, per piece
* with balanced tool tip
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
85
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
1flute
SC
DIN 6535Form HA
Aluminium Gold Plastic
Copper Brass Wood
D1
D2
L1
DATRON Standard Engraving Tool, Specially Balanced
■ Micrograin solid carbide engraving tool
■ with single flute
■ conic tool tip
■ shank without clamping surface DIN 6535-HA
■ with counter-balancing cut
DATRON standard engraving tools are designed for engraving in aluminium, non-ferrous metals and plastics. The variants with patented counter-balancing cut allow high-speed applications without vibrations.
Art. No. D1 D2 L1
(mm) (mm) (mm) Degree
0068282G 0.10 6.00 50.00 30
0068284G 0.10 6.00 50.00 40
0068285G 0.10 6.00 50.00 60
0068286G 0.10 6.00 50.00 90
α
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
86
D1
α
D1
D2
L1
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
1flute
SC
DIN 6535Form HA
Steel
■ Micrograin solid carbide engraving tool
■ with single flute
■ shank without clamping surface DIN 6535-HA
■ for Steel engraving
DATRON’s engraving tools for steel machining are clearly desi-gned with a reinforced cutting geometry and achieve highest durability.
DATRON Standard Engraving Tool for Steel Engraving
Art. No. D1 D2 L1
(mm) (mm) (mm) Degree
0068510 0.1 6.0 50.0 20
0068511 0.1 6.0 50.0 30
0068512 0.1 6.0 50.0 40
0068513 0.1 6.0 50.0 60
0068514 0.1 6.0 50.0 90
0068510A 0.2 6.0 50.0 20
0068511A 0.2 6.0 50.0 30
0068512A 0.2 6.0 50.0 40
0068513A 0.2 6.0 50.0 60
0068514A 0.2 6.0 50.0 90
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
87
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
1flute
SC
DIN 6535Form HA
Steel
D1
α
D1
D2
L1
DATRON Standard Engraving Tool for Hard-Metal Machining
■ Micrograin solid carbide engraving tool
■ with single flute
■ shank without clamping surface DIN 6535-HA
■ for Steel engraving
■ with reinforced flutes
These engraving tools developed for hard-metal machining have a standard special coating, an extremely short halving and reinforced support geometry. Thus it is also possible to achieve cost-effective machining in standard times even with the hardest materials.
Art. No. D1 D2 L1 CT
(mm) (mm) (mm) Degree
0068520 0.10 4.00 40.00 30 x
0068520A 0.20 4.00 40.00 30 x
0068521 0.10 4.00 40.00 45 x
0068521A 0.20 4.00 40.00 45 x
CT = BALINIT® X.CEED Coating
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
88
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
4flutes
SC
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
α
L2
D1
D2
L1
DATRON Countersink Tool
■ Micrograin solid carbide countersink tool
■ with two flutes or up to four flutes
■ shank without clamping surface DIN 6535-HA
These mould tools allow machining countersinks and chamfers with highest surface quality. The deeply cut chip chambers guar-antee optimum chip evacuation and allow high feed rates.
Art. No. D1 D2 L1 L2 F
(mm) (mm) (mm) (mm) Degree
0068478A 3.0 3.0 40.0 2.5 60 2
0068478 3.0 3.0 40.0 1.5 90 2
0068479B 6.0 6.0 50.0 8.5 40 3
0068480B 6.0 6.0 50.0 5.1 60 3
0068479C 6.0 6.0 50.0 3.2 70 3
0068479 6.0 6.0 50.0 3.0 90 3
0068479A 6.0 6.0 50.0 1.7 120 3
0068479D 6.0 6.0 50.0 2.8 140 3
0068480 8.0 6.0 50.0 4.0 90 3
0068480A 8.0 6.0 50.0 2.3 120 3
0068480C 8.0 6.0 50.0 3.3 100 3
0068483 10.0 6.0 50.0 5.0 90 3
0068483B 10.0 10.0 50.0 5.0 90 3
0068483A 10.0 6.0 50.0 2.8 120 4
0068483E 12.0 6.0 50.0 3.4 120 4
0068483D 12.0 8.0 50.0 4.0 90 4
0068483H 14.0 8.0 50.0 7.0 90 4
F = Number of Flutes
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
89
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
3flutes
SC
DIN 6535Form HA
Foam
D3
D2
L1
L2
■ Micrograin solid carbide countersink tool
■ with three flutes
■ shank without clamping surface DIN 6535-HA
The new foam mills, besides having finely polished cutters also feature chip channels adjusted for PU foam machining. In addi-tion, DATRON especially perfected the special blade geometries and helix angles of the foam tool series.
DATRON Countersink Tool for Foam
Art. No. D1 D2 D3 L1 L2 F
(mm) (mm) (mm) (mm) (mm)
0068485C 4.00 6.00 10.00 50.00 3.00 3
0068485D 4.00 6.00 12.00 50.00 4.00 3
0068485E 4.00 6.00 14.00 50.00 5.00 3
0068485F 4.00 6.00 16.00 50.00 6.00 3
D1
F = Number of Flutes
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
90
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
3/6flutes
SC
DIN 6535Form HA
Acrylic Plastic
D3
D2
L1
DATRON Countersink Tool for Acrylic
■ Micrograin solid carbide countersink tool
■ with three or six flutes
■ shank without clamping surface DIN 6535-HA
■ with polished cutting edge
The especially developed countersink for acrylic machining has an extremely sharp cutting geometry with a polishing cut for high-quality chamfers and countersinks, as well as 15° helixes and large chip chambers for optimal chip evacuation.
Art. No. D1 D2 D3 L1 L2 F
(mm) (mm) (mm) (mm) (mm)
00685806 0.10 6.00 6.00 50.00 3.00 6
00685808 0.10 6.00 8.00 50.00 4.00 6
00685810 4.00 6.00 10.00 50.00 3.00 3
00685812 4.00 6.00 12.00 50.00 4.00 3
00685814 4.00 6.00 14.00 50.00 5.00 3
00685816 4.00 6.00 16.00 50.00 6.00 3
D1
L2
F = Number of Flutes
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
91
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
1flute
SC
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
α
D1
L2
D1
D2
L1
L2
DATRON Milling Countersink Tool
■ Micrograin solid carbide milling countersink tool
■ with single flute
■ centre cut
■ shank without clamping surface DIN 6535-HA
This combination tool has a cylindrical milling range, as well as a conical countersink part. The groove and chamfer can be realized in only one work step. This way, the tool change can be omitted, which reduces the production time.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm) Degree
0068772 2.0 6.0 50.0 1.9 90
0068772A 2.0 6.0 50.0 2.9 90
0068772B 2.0 6.0 50.0 4.9 90
0068772D 2.0 6.0 50.0 1.0 90
0068772E 2.0 6.0 50.0 1.5 90
0068772F 2.0 6.0 50.0 2.5 90
0068772G 2.0 6.0 50.0 4.0 90
0068773 3.0 6.0 50.0 2.9 90
0068773A 3.0 6.0 50.0 3.9 90
0068773B 3.0 6.0 50.0 4.9 90
0068773D 3.0 6.0 50.0 1.0 90
0068773E 3.0 6.0 50.0 1.5 90
0068773F 3.0 6.0 50.0 2.5 90
0068773 G 3.0 6.0 50.0 2.0 90
0068774 4.0 6.0 50.0 2.9 90
0068774A 4.0 6.0 50.0 3.9 90
0068774B 4.0 6.0 50.0 5.0 90
0068774D 4.0 6.0 50.0 1.0 90
0068774E 4.0 6.0 50.0 1.5 90
0068774F 4.0 6.0 50.0 2.5 90
0068774G 4.0 6.0 50.0 2.0 90
Continued on next page
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
92
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
1flute
SC
DIN 6535Form HA
Aluminium Gold Wood
Plastic Copper Brass
α
D1
L2
D1
D2
L1
L2
DATRON Milling Countersink Tool
■ Micrograin solid carbide milling countersink tool
■ with single flute
■ centre cut
■ shank without clamping surface DIN 6535-HA
This combination tool has a cylindrical milling range, as well as a conical countersink part. The groove and chamfer can be realized in only one work step. This way, the tool change can be omitted, which reduces the production time.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm) Degree
0068775D 5.0 6.0 50.0 1.0 90
0068775E 5.0 6.0 50.0 1.5 90
0068775G 5.0 6.0 50.0 2.0 90
0068775F 5.0 6.0 50.0 2.5 90
0068775 5.0 6.0 50.0 3.0 90
0068775A 5.0 6.0 50.0 4.0 90
0068775B 5.0 6.0 50.0 5.0 90
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
93
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
2flutes
SC30°
DIN 6535Form HA
Aluminium Gold Plastic
Copper Brass
D1
D2
L1
L2
D1
α
DATRON V-Slotting End Mill
■ Micrograin solid carbide V-groove end mill
■ with two flutes
■ centre cut
■ shank without clamping surface DIN 6535-HA
The particular advantage of these special tools lies in their over centre cutting face geometry. This allows not only making of chamfers and countersinks but also the milling of V-Slots, which are needed especially in bending technology applications.
Art. No. D1 D2 L1 L2
(mm) (mm) (mm) (mm) Degree
0068795 5.0 6.0 50.0 10.0 90
0068795A 5.0 6.0 50.0 10.0 60
0068795B 5.0 6.0 50.0 10.0 120
0068796 6.0 8.0 58.0 12.0 90
0068796A 6.0 8.0 58.0 12.0 60
0068796B 6.0 8.0 58.0 12.0 120
0068798 8.0 10.0 70.0 16.0 90
0068798A 8.0 10.0 70.0 16.0 60
0068798B 8.0 10.0 70.0 16.0 120
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
94
D2
L1
α
DA
TR
ON
Sta
nd
ard
En
gra
vin
g T
oo
l, C
ou
nte
rsin
k To
ol
and
Cu
ttin
g D
iam
on
d
Aluminium Gold Plastic
Copper Brass
Art. No. Article Description L1 D2
(mm) (mm) Degree
0068501 Cutting Diamond, spring-mounted 90 60 6.0 90
0068502 Cutting Diamond, spring-mounted 120 60 6.0 120
This towing tool is used without rotary speed. A tip angle of 90° should be chosen for engravings on workpieces with curved sur-face. Otherwise, a tip angle of 120° is recommended.
DATRON Cutting Diamond
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
95
Highly efficient face milling with HSK interface and replaceable cutting inserts.
Gold
Silver
Copper
Brass
Plastic
Aluminium
DATRON Face Milling Tool
95
DA
TR
ON
Fac
e M
illin
g T
oo
l
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
96
2flutes
SC
r
Aluminium Gold Plastic
Copper Brass Steel
L2
R D1
L3
L1
L2
DA
TR
ON
Fac
e M
illin
g T
oo
l
■ Monoblock tool
■ with two replaceable cutting inserts
■ based on HSK
This HSK-E 25 based monoblock tool has been developed for highly efficient milling over. The required penetration angle is 3-5°. Solid carbide replaceable cutting inserts are available for various materials.
Art. No. D1 L1 L2 L3 R
(mm) (mm) (mm) (mm) (mm)
0078920 20.0 40.0 10.0 15.0 0.8
Art. No. Article Description for Face Milling Tool R Material
(mm)
0078920A Cutting insert (polished) 0078920 0.8 Aluminium
0078920B Cutting insert 0078920 0.8 Steel
DATRON Face Milling Tool
Please note: This tool can only be measured with the DATRON tool length sensor. Article numbers 0078920A and 0078920B are for Face Milling Tools with two cutting inserts.
Art. No. Article Description
0078920C Screw set with 10 screws and screwdriver
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
97
The new CVD cutting material for the cutting of CRP, GRP, PCB and Plastic exceeds the standard PCD cutting material with regard to abrasion resistance, tool life and surface finish.
GRP
PCB
CRP
DATRON Diamond Milling Tool
97
DA
TR
ON
Dia
mo
nd
Mill
ing
to
ol
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
98
DA
TR
ON
Dia
mo
nd
Mill
ing
to
ol
Tailor-Made Milling Tools for Machining CRP/GRP
The new CVD cutting material for cutting abrasive materials surpasses the conventional PCD cutting material with regard to wear resistance and tool life.
This is made possible by the diamond tools' special manufacturing process:
Conventional PCD cutting edges are manufactured by press-ing. CVD cutting edges, however, are constructed by layers using chemical vapour deposition. This leads to an unexcelled homogeneous and low-stress structure. Micro disruptions on the cutting edge are kept to a minimum, thus slowing wear consid-erably.
Another advantage involves the high-quality cut quality due to the microscopically smooth cutting edge. The machining of highly abrasive materials up to now was characterised by an enormous amount of tool wear. With the DATRON CVD tools, 500 metres of cutting length in these materials could be quickly realised. This saves frequent tool changes and offers a consider-able advantage in process reliability.
The scanning electron microscope illustrates the high surface quality of the CVD cutting edge. (Image: Fraunhofer Institut)
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
99
D1
D2
L1
L2L3
D3
DA
TR
ON
Dia
mo
nd
Mill
ing
to
ol
1-2flutes
CVD 0°
DIN 6535Form HA
CRP FR-4FR-4 GRPGRP
Graphite Laminate
■ Micrograin solid carbide end mill with soldered Diamond flute
■ with single/double flute and flat bottom
■ shank without clamping surface DIN 6535-HA
Compared to Micrograin SC tools this specially designed CVD Diamond milling tool allows for higher feed rates at very high tool life.
DATRON Diamond Mill for CRP/GRP
Art. No. D1 D2 D3 L1 L2 L3 F
(mm) (mm) (mm) (mm) (mm) (mm)
00781203 3.0 6.0 2.8 50.0 5.0 10.0 1
00781204 4.0 6.0 3.8 50.0 6.0 6.0 2
00781206 6.0 6.0 5.6 50.0 10.0 14.0 2
00781208 8.0 8.0 7.2 50.0 12.0 16.0 2
00781210 10.0 10.0 9.2 60.0 8.0 17.0 2
00781299 Regrind service (if possible)
F = Number of Flutes
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
100
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
101
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
Our accessories and expendable material include change sta-tions, collet chucks, limit stop rings and several other items.
And our innovation: VacuCard++, a "sacrificial layer" for vacuum clamping plates with adhesive structure for machining small, light parts.
DATRON Accessories and Expendable Material
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
102
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
Collets for DATRON high frequency spindles. The collets with the final letter "D" are suitable for spindles with a capacity of 1.2 and 2 kW, as well as for 0.6 kW spindles built since 2012 (throttled 2.0 kW spindle).
DATRON Collet Chucks for HF Spindles
Art. No. Article Description Spindle Capacity in kW
0068320 Collet chuck D 3.0 0.6
0068320D Collet chuck D 3.0 2.0
0068324 Collet chuck D 4.0 0.6
0068324D Collet chuck D 4.0 2.0
0068325 Collet chuck D 5.0 0.6
0068326 Collet chuck D 6.0 0.6
0068326D Collet chuck D 6.0 2.0
0068328D Collet chuck D 8.0 2.0
0068330 Collet chuck D 3.175 0.6
0068330D Collet chuck D 3.175 2.0
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
103
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
DATRON Service Kit for HF Spindles
Service kit for the cleaning and greasing of the spindle. We recommend to clean the collet chuck within the spindle at least once a week according to the instructions of the manual.
Art. No. Article Description
0068338 Service kit for spindle capacity 0,6 kW
0068338A Service kit for spindle capacity 2,0 kW
0068339 Grease for HF spindle, tube, 8 g
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
104
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
DATRON Tool Change Stations
Accessories for the automatic tool change. The tool change sta-tions can be supplied in different tool diameter sizes.
Art. No. Article Description D3
(mm)
0069220 Tool change station for 3 mm and 1/8” shanks 7.55
0069220A Brass clamp for tool change station (3 mm, 1/8”) 7.55
0069221 Tool change station for 6 mm and 1/4” shanks 10.5
0069221A Brass clamp for tool change station (6 mm, 1/4”) 10.5
0069222 Tool change station for mills up to 8 mm shank 12.5
0069222A Brass clamp for tool change station (8 mm) 12.5
0069223 Tool change station for mills up to 12 mm diameter 15.0
0069223A Brass clamp for tool change station (12 mm) 15.0
0069227 Tool change station for mills up to 14 mm diameter 18.0
0069227A Brass clamp for tool change station (14 mm) 18.0
0690234 Tool change station for HSK-E 25
0069234A Brass clamp for HSK-E 25
0069231 Tool change station for HSK-E 32
0069231A Brass clamp for HSK-E 32
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
105
The limit stop rings are used to fasten the tool shafts in the automatic tool change. To push the rings on the 6 mm and 8 mm shanks we recommend the DATRON insertion tool.
Art. No. Limit stop ring D1 D2 Material
(mm) (mm)
0068000 For tool change station 0069220 3.0 7.55 Plastic
0068000Y For tool change station 0069220 4.0 10.50 Brass
0068001 For tool change station 0069220 3.175 7.55 Plastic
0068002 For tool change station 0069221 6.0 10.50 Brass
0068002H For tool change station 0069223 6.0 15.00 Brass
0068002J For tool change station 0069227 6.0 18.00 Brass
0068002Z For tool change station 0069221 6.35 10.50 Brass
0068001D For tool change station 0069222 8.0 12.50 Brass
0068002K For tool change station 0069227 8.0 18.00 Brass
0068180 Limit stop ring insertion tool for 6 mm shank tools
0068180A Limit stop ring insertion tool for 8 mm shank tools
DATRON Limit Stop Rings and Insertion Tool
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
D2
D1
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
106
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
DATRON Adapter Collets
With the DATRON adapter collets you may use different tool shank diameters in one spindle collet chunk only. The adapters are pre-stressed and therefore reusable. To open the adapter collets you need the DATRON adapter insertion tool Art. No. 0068337D for 6 mm and 8 mm adapters.
Art. No. D1 D2 D3
(mm) (mm) (mm)
0068336G 1.0 6.0 7.55
0068336H 1.1 6.0 7.55
0068336J 1.2 6.0 7.55
0068336K 1.3 6.0 7.55
0068336L 1.4 6.0 7.55
0068336M 1.5 6.0 7.55
0068336N 1.6 6.0 7.55
0068336P 1.7 6.0 7.55
0068336Q 1.8 6.0 7.55
0068350 1/8” 6.0 7.55
0068350A 1/8” 6.35 7.55
Art. No. D1 D2 D3
(mm) (mm) (mm)
0068350C 1/8” 8.0 10.5
0068336B 2.0 6.0 7.55
0068336A 2.0 8.0 10.5
0068336 3.0 6.0 7.55
0068336C 3.0 8.0 10.5
0068350D 4.0 6.0 7.55
0068336D 4.0 8.0 10.5
0068336R 5.0 8.0 10.5
0068336F 6.0 8.0 10.5
0068337DAdapter insertion tool for 6 mm and 8 mm collet chucks
D2
D1D3
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
107
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
1. Before clamping
The polygon-shaped geometry of the shank insert can be clearly seen in the unloaded, relieved state.
3. Inserting the tool shank
Now the tool shank can be easily and quickly mounted in the insert.
4. The tool is clamped
The pressure of the clamping fixture and the force transmis-sion are reduced. The elastically deformed collet chuck comes back to its polygon shape. Now the tool is firmly and centrically clamped.
2. In the clamping fixture
Force is applied at three points by means of the hydraulic clam-ping fixture. This makes the shank insert circular.
The HSK-E polygon collet chucks have been developed for pre-cise and safe cutting, also at high speeds.
The stable, rotation-symmetrical design has an excellent con-centricity of less than 3 µm. This permits high quality milling results at a speed of up to 48,000 RPM. With passive vibration damping, the life of the high frequency spindle and the cutting tool is significantly improved.
DATRON/Schunk Information
TRIBOS-RM Toolholder
Clamping diameter polygonal
Clamping diameter is round
Joining shank
Clamping diameter shrinks
Forc
eFo
rce
Force Force
Force Force
Forc
e
Force Force
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
108
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
DATRON/Schunk HSK-E Collets
The HSK-E inserts developed by DATRON and Schunk are solidly built and come with a concentricity of <3 µm and guarantee highest precision during the machining process.
Art. No. D1 D2 Type L1 L2
(mm) (mm) (mm) (mm)
0068300G 3.0 20.0 HSK-E 25 40.0 30.0
0068300S 3.0 14.0 HSK-E 25 40.0 30.0
0068311D 3.175 20.0 HSK-E 25 40.0 30.0
0068301G 4.0 20.0 HSK-E 25 40.0 30.0
0068302G 5.0 20.0 HSK-E 25 40.0 30.0
0068303G 6.0 20.0 HSK-E 25 40.0 30.0
0068303S 6.0 14.0 HSK-E 25 40.0 30.0
0068304G 8.0 20.0 HSK-E 25 40.0 30.0
0068305G 10.0 20.0 HSK-E 25 40.0 30.0
0068306D 3.0 20.0 HSK-E 32 50.0 30.0
0068307D 6.0 20.0 HSK-E 32 50.0 30.0
0068308D 8.0 20.0 HSK-E 32 50.0 30.0
0068309D 10.0 20.0 HSK-E 32 50.0 30.0
L1
L2
D1
D2
DA
TR
ON
Ein
sch
nei
der
- S
ing
le F
lute
En
d M
ill
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
109
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
DATRON/Schunk Clamping Devices
The hydraulic Tribos clamping fixture for polygon clamping technique, equipped with hand pump and manometer, does not require any source of energy and can therefore be used in a very flexible manner. Just a few steps are required for the clamping process. Clamping is completed within 20 seconds.
Compared to the shrink technique, this wear-free process does not require any heating up or cooling down phases.
This clamping device is used to insert the DATRON/Schunk adapters in the clamping device.
Art. No. Article Description
0068340 Clamping device
Art. No. Article Description for D2 Adapter Type
(mm)
0068341D Reduction insert 20 HSK-E 25
0068341S Reduction insert 14 HSK-E 25
DATRON /Schunk Reduction Inserts
Tribos Clamping device
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
DA
TR
ON
Ein
sch
nei
der
- S
ing
le F
lute
En
d M
ill
110
VacuCard++: DATRON Defies the Rules of Physics Clamping of small parts with vacuum
What is VacuCard++?
VacuCard++ is a special, patent-pending paperboard which is used as a sacrificial layer between the work piece and the vacu-um plate. Unlike the DATRON VacuCard, the VacuCard++ has an additional grid-like sealing/adhesive layer that significantly increases the holding force during vacuum clamping and considerably reduces vacuum loss.
For which applications can the VacuCard++ be used?
■ Milling small parts made of plate material
■ Consolidated PCB machining without separating webs
■ Milling thin and soft plate material
■ Milling plate material with a rough surface
How does the VacuCard++ work?
■ The sealing/adhesive layer holds parts that are so small that vacuum alone would not be enough to hold them.
■ Increases the holding force during vacuum clamping with suction-cup effect
■ Prevents work pieces from slipping when large milling forces are used
■ Reduces the vacuum consumption and prevents early collapse
■ Distributes the vacuum evenly over the work piece
■ Prevents raising of edges in soft and flexible work pieces
■ Machined work pieces can be removed without any residue
Technical data
■ Paperboard with redundant suction-cup effect due to a grid-like sealing/adhesive layer
■ Combination of adhesion and vacuum clamping
■ Reduced vacuum consumption due to limited air permeability and protective film cover
■ Disposed of as paper waste
■ Durability depends on the storage
DATRON VacuCard++
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
111
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
DATRON Expendable Material
Art. No. Article Description Unit Size
0A01618G VacuCard++ 10 450 x 650 x 0.7 mm
0A01618D VacuCard++ 50 450 x 650 x 0.7 mm
0A01618H VacuCard++ 10 500 x 1000 x 0.7 mm
0A01618E VacuCard++ 50 500 x 1000 x 0.7 mm
0A01618I VacuCard++ 10 700 x 1000 x 0.7 mm
0A01618F VacuCard++ 50 700 x 1000 x 0.7 mm
* shipping/packing excluded
DATRON VacuCard++
The patented VacuCard++ is based on the standard VacuCard and has a grid-like adhesive structure. Thanks to this special adhesive layer, the VacuCard++ has a considerably higher com-bined clamping force and fixes even small, light parts with high process reliability.
■ grid-like adhesive layer (10 mm x 10 mm)
■ delicate parts are firmly clamped
■ homogeneous vacuum distribution
■ format matches the DATRON vacuum plates
DATRON VacuCard
This paperboard serves as the "sacrificial layer" during vacuum clamping. This special fabric structure distributes the vacuum homogeneously and ensures a uniform suction force over the entire clamping surface.
■ distributes vacuum homogeneously
■ uniform suction force
■ format matches the DATRON vacuum plates
Art. No. Article Description Unit Size
0A01616* VacuCard 50 450 x 650 x 0.7 mm
0A01617* VacuCard 50 500 x 1000 x 0.7 mm
0A01617A* VacuCard 50 700 x 1000 x 0.7 mm
* shipping/packing excluded
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
112
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
DATRON Expendable Material
Art. No. Article Description Unit Size
0A01618M VacuCard+++ 10 500 x 1000 x 0.7 mm
0A01618K VacuCard+++ 100 500 x 1000 x 0.7 mm
0A01618N VacuCard+++ 10 700 x 1000 x 0.7 mm
* shipping/packing excluded
The patented VacuCard+++ is based on the standard VacuCard and has a grid-like adhesive structure (5 mm x 5 mm). Thanks to this special adhesive layer, the VacuCard+++ has a considerably higher combined clamping force and fixes even small, light parts up to 10 mm diameter with high process reliability.
■ grid-like adhesive layer (5 mm x 5 mm)
■ smallest parts are firmly clamped
■ homogeneous vacuum distribution
■ format matches the DATRON vacuum plates
DATRON VacuCard+++
DA
TR
ON
Ein
sch
nei
der
- S
ing
le F
lute
En
d M
ill
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
113
DATRON Expendable Material
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
Art. No. Article Description Size Picture
07009360Centering Sleeve for Module Clamping Plates
A
07009374 Centering Sleeve Counterpart B
0069922 Slide nut M645 mm x 10 mm x
3.5 mm
0069922A Slide nut M645 mm x 13 mm x
6 mm
0069926 Slide nut M625 mm x 10 mm x
3.5 mm
0069926A Slide nut M625 mm x 13 mm x
6 mm
DATRON Slide Nuts and Centering Sleeves
B
A
Art. No. Article Description
0A01501SSpraying nozzle incl. securing bracket
07004461 Securing bracket
07004462 Spraying nozzle
0069725 PVC tube red 1 m
0069725B PVC tube blue 1 m
0069725G PVC tube green 1 m
0069726 PVC tube white 1 m
0069727 Silikon tube 1 m
DATRON Spraying Nozzles and Securing Brackets
Art. No. Article Description
0077105 Metal cleaner 500 ml can
0077105A Foam cleaner 500 ml can
DATRON Cleaner
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
114
Cooling lubricants for minimum lubrication
Beyond CNC machines and tools, DATRON is now also offering the appropriate cooling lubricants. These new cooling lubricants, called ProCut, are only appropriate for minimum lubrication. Due to the very low consumption, this puts the price per liter into perspective. In addidion, operating and personnel costs for the machine and part cleaning are saved to a great degree, as well as, for example, changing the lubricant. DATRON ist still offering minimum lubrication systems for Microjet, which optimally moisten the workpieces with their flexibly adjustable spray nozzles.
DATRON Expendable Material
DATRON ProCut 56
ProCut 56 is made of pure hydrocarbon and works as a replace-ment for ethanol. It shows its strengths in the machining of workpieces made of aluminium and plastics, especially in con-junction with DATRON’s CleanCut chip extraction. The lubricant allows burr-free machining of the workpieces. It also prevents the formation of material work-ups on the tool. No explosion protection is required for chip extraction. ProCut 56 is complete-ly volatile and leaves no residue on the workpiece. Thus, this MM-lubricant is especially appropriate for companies or depart-ments where the use of ethanol is not allowed and for machin-ing materials that react aggressively when in contact with etha-nol. No further cleansing is required with this cooling lubricant.
Consumption without CleanCut: 80 ml/hour (about 30% of ethanol consumption) CleanCut consumption: 270 ml/hour
Art. No. Package size
0069266 10 Liter
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
DA
TR
ON
Ein
sch
nei
der
- S
ing
le F
lute
En
d M
ill
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
115
ProCut 56-2 is made of pure hydrocarbon with light lubrica-tion and works as a replacement for ethanol. It is designed for Plexiglas machining or for materials with high surface quality. Thus, this MM-lubricant is especially appropriate for companies or departments where the use of ethanol is not allowed and for workpieces requiring high surface quality. Cleansing is required with this cooling lubricant.
Consumption without CleanCut: 95 ml/hour CleanCut consumption: 200 ml/hour
DATRON ProCut 56-2
Art. No. Package size
0069266A 10 Liter
DATRON Expendable Material
DA
TR
ON
Acc
esso
ries
an
d E
xpen
dab
le M
ater
ial
Especially for steel processing, the lubricant ProCut 200 was developed. Cleansing is required with this cooling lubricant.
Consumption: 20 ml/hour
DATRON ProCut 200
Art. No. Package size
0069266B 10 Liter
0069266D 5 Liter
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
116
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
117
DA
TR
ON
Cla
mp
ing
To
ols
DATRON offers flexible and process-reliable clamping tech-niques for optimised setup times on the machine table. Depending on the application and work piece size, wedge clamping elements KSE, compact centric clamps KZS or multi-functional clamps MFS are used.
These are characterised by high clamping forces, easy handling and fast retrofitting.
For further information please order our DATRON accessories catalogue.
DATRON Clamping Tools
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
118
DA
TR
ON
Cla
mp
ing
To
ols
Examples of clamping options with the wedge clamping elements:
Option 1:
Single clamping with lateral fixed stop. Clamping elements clamp on both sides in the pull-down device.
Option 2:
Two fixed stops, one-sided clamping in the pull-down device.
Option 3:
Double-clamping in the pull-down device thanks to wedge clamping element on both sides. One-sided wedge clamping element serves as fixed stop.
Option 4:
Multiple-clamping thanks to wedge clamping element on both sides in the pull-down device. Additional one-sided clamping in the pull-down device via one-sided wedge clamping element with fixed stop.
DATRON Wedge Clamping Elements KSE
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
119
DA
TR
ON
Cla
mp
ing
To
ols
Art. No. Article Description Quantity
0078930 KSE 21-8, smooth 1
0078931 KSE 21-G8, corrugated 1
0078932 KSE 21-FBA, smooth 1
Technical Data KSE 21-8, smooth KSE 21-G8, corrugated KSE 21-FBA
Jaw width 21 mm 21 mm 21 mm
Clamping force 15,000 N for 25 Nm 15.000 N for 25 Nm 4 kN for 7 Nm
Clamping screw M6 M6 M6
L min-max (mm) 40 - 44.5 35 - 39.5 49.1 - 51.9
Total height (mm) 29.5 - 33.5 29.5 - 33.5 20 - 28
Infeed stroke (mm) 0 - 4 0 - 4 0 - 8
F
F
F
F F
F
F
F F
F
DATRON Wedge Clamping Elements KSE
KSE 21-FBAFeatures:
■ Easy handling
■ Fixed stop or lateral stop possible
■ Built-in, integrated pull-down device
■ Hardened version
■ Flexible clamping inserts, which can be screwed on
■ High clamping forces 4 kN
KSE 21-G8 Features:
■ Easy handling
■ Double-clamping possible
■ Built-in, integrated pull-down device
■ Hardened version, corrugated
■ Integrated return spring
■ Higher torque transfer thanks to form fit
■ High clamping forces 4 kN
KSE 21-8 Features:
■ Easy handling
■ Double-clamping possible
■ Built-in, integrated pull-down device
■ Hardened version, smooth
■ Integrated return spring
■ Flexible clamping inserts, which can be screwed on
■ High clamping forces 4 kN
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
120
DATRON Compact Centric Clamp KZS
Features:
n 100% encapsulation With the closed slide geometry, you won't waste time cleaning.
n 5-axis machining Produce with optimised short tools. With the KZS, you get close to the work piece and not to the clamp
n Produce raw and finished parts With a precision of 0.02 mm, you can produce raw and finished parts in the same clamp.
n Contour clamping possible thanks to milling out the aluminium jaws.
n Clamp large, small or round parts. With the modular changing jaw system, you can easily adapt the KZS to your specific requirements.
n With the integrated DATRON zero-point clamping system for even faster setup.
Clamping force (max.) 20 kN
Torque 65 Nm
25
20
15
10
5
0Cla
mp
ing
forc
e (k
N)
Torque (Nm)
0 10 20 30 40 50 60 70
Advantages:
■ Easy handling
■ Flexible
■ Fast conversion
■ High clamping force
■ Integrated DATRON zero-point clamping system
■ Inexpensive aluminium clamping jaws
■ Hardened basic body
■ Corrosion-resistant
■ 100% encapsulated
The encapsulated DATRON compact centric clamp is completely protected from dirt. Thanks to its specially developed slide geometry with a guide length of 150 mm, the KZS is the first fully encapsulated centric clamp. Malfunctions due to dirt and stuck chips are now a thing of the past.
DA
TR
ON
Cla
mp
ing
To
ols
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
121
DA
TR
ON
Cla
mp
ing
To
ols
DATRON Compact Centric Clamp KZS
Function of the KZS compact centric clamp
Despite its compact design length of 170 mm, the KZS will con-vince you with its very large clamping range of 0 - 160 mm. The work pieces can be centrically clamped with a precision of 0.02 mm with a clamping force of max. 20 kN by operating a clam-ping screw.
Art. No. Article Description Quantity
0A01088D DATRON Compact centric clamp 1
0078936C Spare aluminium clamping jaw 1
Technical Data DATRON compact centric clamp KZS
Jaw width 100 mm
Clamping force (total) 20 kN at 65 Nm torque
Weight 9 kg
Basic body length 150 mm
Basic body width 140 mm
Height (with top jaws) 105 mm
max. Clamping range Single clamping
Clamping depth (max. 14 mm) 0 - 160 mm
Clamping depth (max. 32 mm) 0 - 75 mm
(150)
(170)
(105
)
(0-30)(70)
(37)
14
47,5
32
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
122
DATRON Multifunctional Clamp MFS
The multifunctional clamp can be used for single or double clamping for small and large work pieces. By individually wor-king in the clamping contour in the aluminium clamping jaws, quick, work piece-optimised clamping is achieved. Fast, precise positioning and clamping on the machine is possible thanks to the integrated DATRON zero-point clamping system.
max. Clamping range Single clamping Double clamping
Clamping depth (max. 32,5 mm) 0 - 310 mm 0 -145 mm
Clamping depth (max. 49 mm) 0 - 207 mm 0 -103 mm
(85)
(49.
5) 32.5
(85)
(330)
2361,5
(0-37,5) (0-37,5)Backen können indiesem Bereichbearbeitet werden
Features:
■ Tensile clamping force: This way, the basic body isn't bent.
■ Extensive clamping jaw range.
■ Third-hand function: When clamping the second work piece, the first one is already held securely in its position.
■ Can be disassembled quickly and easily for cleaning.
■ Contour clamping possible thanks to milling out the aluminium jaws.
■ Can be used as double clamp or single clamp.
Clamping jaws can be machined in this area
DA
TR
ON
Cla
mp
ing
To
ols
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
123
DA
TR
ON
Cla
mp
ing
To
ols
DATRON Multifunctional Clamp MFS
Setup and function of the multifunctional clamp MFS
The first movable clamping jaw is positioned at the work piece in the first clamping situation by turning the spindle clockwise with the hand crank, and is held securely by the preclamping of the third-hand function. By continuing to turn the crank, the second movable clamping jaw is positioned at the work piece in the second clamping station and fixed in place. The force is built up mechanically via the spindle. For single clamping, the rear jaw is clamped and the middle jaw is removed.
Art. No. Article Description Quantity
0A01088C Multifunctional clamp MFS 1
0078936B Aluminium middle jaw, fixed 1
0078936A Aluminium side jaw, movable 1
1
2
3
56
8
47
2
Technical data DATRON multifunctional clamp MFS
Jaw width 100 mm
Clamping force (per jaw) 20 kN
Weight 16 kg
Basic body length 330 mm
Basic body width 118 mm
Height (with jaws) 109,5 mm
1 Middle jaw
■ Fixed position
■ Easy setup for large jaw width
2 Movable clamping jaw
■ Standardised take-up position
■ Extensive range of jaws
3 Quick dismantling
■ Few components
■ Entire spindle unit can be removed
4 Clamping lever
5 Precise slide guidance
■ Thanks to long inner-lying guide
6 Low basic body
■ Better utilisation of the Z axis
7 Spring-return clamping (third-hand function)
■ Holds the first work piece while the second work piece is being clamped in
8 Low basic body
■ For clamping the movable jaw for single clamping
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
124
DA
TR
ON
Cla
mp
ing
To
ols
DATRON Single-Acting Clamping Vise KSO
The KSO is a specially developed single-acting clamping vise for small parts. Its basic principle incorporates an encapsulated spindle drive. The jaws are moved to the desired clamping posi-tion quickly and easily via the spindle drive. The appropriate tightening torque ensures that workpieces are held securely for both O.D. and I.D. clamping.
Due ot the long jaw guidances, lifting of the jaws under clamp-ing force is reduced. Full encapsulation of the spindle renders time-consuming maintenance or cleaning work a thing of the past. With its integrated pallet interface, the KSO is an optimum clamping vise for storage solutions.
Features:
■ Aluminium clamping jaws quick-change system
■ Simple handling
■ Compact design
■ Blank and finished part clamping system
max. Clamping range Single clamping
Clamping depth (max. 10 mm) 0 - 80 mm
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
125
DA
TR
ON
Cla
mp
ing
To
ols
DATRON Single-Acting Clamping Vise KSO
Technical data DATRON Single-Acting Clamping Vise KSO
Jaw width 40 mm
max. clamping force 12 kN (KSO 40)
Weight 1.7 kg
Basic body length 150 mm
Basic body width 120 mm
Height (with jaws) 80 mm
6
1
1
2
3
4
5
Setup and function of the single-acting clamping vise KSO
The movable clamping jaw is pressed onto the workpiece by hand - cranking the spindle to the right, allowing the workpiece to be clamped and set. Due to the encapsulated spindle, falling chips represent no pro-blem for the bench vice.
Art. No. Article Description Quantity
0A01088E Single-acting clamping vise KSO 1
0078936E Aluminium jaw, 40 x 45 1
0078936F Aluminium jaw, 40 x 30 1
1 100% multiple encapsulation
■ Protection against dirt
■ Insensitive to chips - ensures high functional reliability
2 Clamping range adjustment
■ Without disassembly of jaws
3 Long jaw guiding
■ Precise, only very slight lifting of workpiece
4 Workpiece supports
■ Tried and tested workpiece supports can be used
5 Modular system
■ Modular jaw changing system ensures wide range of application
6 Compact design
■ Ideal for pallets for workpiece storage automation
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
126
DA
TR
ON
Cla
mp
ing
To
ols
DATRON Guide Values for Speed and Feed
Table 2: Guide values for machining aluminium
* Valid for DATRON Face milling tool Art.No. 0078920
The guide values in table 2 are subject to the following criteria:
■ Roughing, in full cut (ae = D1)
■ depending on radial working engagement, for smaller values ae < D1, the cutting depth, cutting speed and feed can be increased.
■ established cutting speeds vc = 500..1500 m/min
■ For small tools, the maximum speed of the spindle is often the limit. The tooth feed must remain constant, i. e. the feed will decrease.
■ The feed depends on the tool length. Long tools only allow low feeds due to the low rigidity.
■ The tooth feed should lie between fz = 0.01 (for D1 = 1 mm) and fz = 0.15 (for D1 = 20 mm) and greatly depends on the tool diameter.
■ Two-bladed tools only allow approx. 25% - 75% of the tooth feed of single-bladed tools. The smaller the tool, the greater the difference.
■ See also the equations for cutting speed and feed.
■ The spindle power and the available torque limit the potential chip volume per unit time. See also the equation for the chip volume per unit time and the cutting capacity.
Cutter Diameter
RPM Cutting Speed Cutting DepthNumber of
FlutesFeed XY Feed Z Feed per flute
D1 (mm) rpm (1/min) vc (m/min) ap (mm) z vf (m/min) vf (m/min) D1 (mm)
1 57000 179.1 0.8 1 0.8 0.1 0.014
1.2 56000 211.1 1 1 0.8 0.15 0.014
1,5 54000 254.5 1.2 1 2 0.25 0.037
2 48000 301.6 1.8 1 2.5 0.4 0.052
2.4 45000 339.3 2 1 2.5 0.5 0.056
3 40000 377.0 2 1 3.5 0.7 0.088
6 36000 678.6 2.5 1 4 1 0.111
8 34000 854.5 3 1 4.2 1.2 0.124
10 32000 1005.3 3 1 4.5 1.4 0.141
12 30000 1131.0 3 2 4.5 1.6 0.075
16 26000 1306.9 2.5 2 4.5 1.8 0.087
20 24000 1508.0 2.5 2 4 2 0.083
20* 36000 2261.9 1 2 4.5 2 0.063
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
127
DA
TR
ON
Cla
mp
ing
To
ols
DATRON Guide Values for Speed and Feed
General rules for selecting technology for milling
The guide values in table 2 can vary depending on:
n Tool n Machine
n Machining situation n Spindle
n Setup
n Material
The guide values in table 2 are understood to be starting values for optimisations. Usually, these guide values work without problems. It always makes sense to start the optimisations "from the bottom" so as not to overload the spindle or machine.
In general, technology selection consists of the following steps:
1. Machining definition (tool, axial and radial feed)
2. Selection of the permissible cutting speed (see Tab. 8.1 Cutting speeds), depending on the tool, workpiece and machining situation (engagement)
3. Selection of the speed depending on the tool diameter (see Tab. 3 Cutting speed formula)
4. Selection of the suitable tooth feed (loadability of the blade, chip space, wear, forces)
5. Calculation of the feed from the speed, number of teeth and tooth feed (see Tab. 3 Feed speed formula)
These steps are iterative and depend on each other and must be observed as a whole for optimisations.
Material Cutting Speed
Titanium Alloys 50 ... 150 m/min
Steel, general 100 ... 400 m/min
Plastic, Thermoplasts 150 ... 500 m/min
Brass, Bronze, Copper 200 ... 1000 m/min
Aluminium Alloys 500 ... 2500 m/min
Fibre Composites 500 ... 5000 m/min
Table 1: Cutting Speed
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
128
DA
TR
ON
Cla
mp
ing
To
ols
DATRON Guide Values for Speed and Feed
Formula Parameter
Cutting SpeedVc = Cutting Speed (mm/min)
d = Tool Diameter (mm)
n = Speed (rpm)
Feed Speed Vf = Feed Speed (mm/min)
fz = Tooth Feed (mm)
n = Speed (rpm)
z = Tooth Number (-)
Cutting capacityPc = Cutting capacity (kW)
Q = chip volume per unit time (cm³/min)
Vsp = spec. chip-cutting volume (cm³/min/kW)
Chip volume per unit time Q = chip volume per unit time (cm³/min)
ae = radial working engagement (mm)
ap = cutting depth (mm)
vf = Feed Speed (mm/min)
Machining of plastics
When machining plastics, such as duroplasts and thermoplasts, generally select lower speeds and higher feeds as compared to aluminium.
Vc =π * d * n
1000
Vf = fz * n * z
Pc =Q
Vsp
Q = ae * ap * vf
Engraving with engraving tools
Select the following values for engraving aluminium or brass with a graver:
Speed approx. 30 000 rpm
Feed approx. 0.7 m/min
Table 3: Formulas for calculating the milling parameters
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
129
DA
TR
ON
Dat
a S
hee
t
DATRON Data Sheet
For your custom milling tools which are not included in the standard range. Here you can enter all technical data including price and article number, so as to have this data easily available next time.
Art. No. D1 D2 D3 L1 L2 L3 R CT €
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
130
DA
TR
ON
Ord
er F
orm
Article Number Article Description Unit Price Quantity Price
Amount:
Value Added Tax:
Total Amount:
Order Form
Company Stamp
Prices are ex works, excluding VAT, packing, freight, and insurance. Minimum value of order: 150.00 EURO. Packing and freight charges for deliveries abroad will be calculated on the actual expenses on the day of delivery. Fees for foreign payments have to be borne by the customer. DATRON offers and deliveries are subject to the “General Terms of Payment and Delivery”. Payments are to be made within 14 days on receipt of invoice net.
Terms of Payment and Delivery for Tool Deliveries
Date, Signature
Invoice Address Address for Shipment
Contact Person Customer Number
FAXTool Order
+49 (0) 61 51 - 14 19 - 39
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
131
DA
TR
ON
Eff
icie
nt
Mac
hin
ing
wit
h S
mal
l To
ols
Efficient Machining with Small Tools!
DATRON´s high-speed micro-tooling technology has significantly impacted the following industries:
n Aluminium Extrusions
n Mold Making
n Intricate CNC Machining
Automotive Supply Industry
n 3D Engraving
n Die Making
n Hot Stamping
n Combination Dies
Printing Industry
n 3D Aluminium Molds
n 3D Rapid Prototyping
n Graphite Electrodes
n Steel Molds
Forms and Molds
n Frontpanels & Housings
n Panels & Nameplates
n Test Adapter
n 3D Rapid Prototyping
n Test Control Units
n Soldering Frames
n PCB Depanelling
Electronic Industry
n Sheet Metal Machining in Aluminium
n Aluminium Extrusions
Aerospace Industry
n Micro Drilling
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
132
DA
TR
ON
CN
C M
illin
g M
ach
ines
DATRON CNC Milling Machines
DATRON’s CNC milling machines and DATRON’s quality tools are perfectly matched to each other. The combination of machine, tools and accessories ensures highest quality, preci-sion and process reliability for your production.
Powerful and highly accurate
Productive and versatile
DATRON M7
DATRON M10 Pro
DATRON M8Cube
Compact and cost-effective
DATRON M75
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
133
DA
TR
ON
CN
C M
illin
g M
ach
ines
Large-sized and efficient
5-axis, precise, compact
DATRON MLCube
DATRON M75DATRON M7
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
134
DA
TR
ON
Den
tal
Mill
ing
To
ols
If you use Zirconium Oxide, Cobalt-Chrome, Titan, Nanocomposite, PMMA or Wax, DATRON offers the optimum milling tools for the dental materials you intend to machine. Thanks to the coatings, specially adapted to the material, the highest surface quality and long tool life are guaranteed.
For detailed information and further dental milling tools simply request our special dental milling tools catalogue or order online! www.datronshop.de
DATRON Dental Milling Tools
Order Hotline:+49 (0) 61 51 - 14 19 - 133
Tools Consultancy:+49 (0) 61 51 - 14 19 - 480
135
No
tes
Notes
Phone: +49(0)6151-1419-0Fax: +49(0)6151-1419-29www.datron.de
DATRON AGIn den Gänsäckern 5D-64367 Mühltal, Germany
Place your Order now:
Order Hotline: +49 (0)6151-1419-133
Tools Consultancy: +49 (0)6151-1419-480
by E-Mail:: [email protected]
by Fax: +49 (0)6151-1419-39
or in our Online-Shop: www.datronshop.de