118 West 22nd Street 5th Floor New York, NY 10011Tel: 212.704.0774 Fax: 212. 633. 0272 email: info@michaelmillerfabrics.com

www.michaelmillerfabrics.com

Size: Approximately 48” W x 54” H

Pixie Wood SquareS

Quilt designed by Marinda StewartLevel:Confident Beginner

Date: Dec.20.11

FABRIC REQUIREMENTS

CX5475 YellowFlower Hearts Double Border

2 yards

CM5474 RedPixie Wood Squares

1 Panel

DC5153 SantaDot to Dot Fat 1/8

CX5477 RedPaisley Wings

3/8 yard

K2149 (Red)Krystal

1/2 yard

CM0376 Holly BerryFairy Frost1/6 yard

CX5473 YellowPixie Pumps

1/4 yard

Also needed: 54” x 60” backing & batting

FABRIC REQUIREMENTS

Fabric Yardage Cutting

CM5474 RedPixie Wood Squares

1 Panel (4) 10 1/2” W x 10 3/4” H(4) 8” x 10 3/4”

CX5475 YellowFlower Hearts Double Border

2 yards

(2) 10 3/4” x 33 1/2” *(2) 8” x 34” **(6) 2 1/2” x 13 1/2”(6) 2 1/2” x 13 3/4”

CX5473 YellowPixie Pumps

1/4 yard (8) 1” x 10 1/2”(8) 1” x 11 3/4”

CX5477 RedPaisley Wings

3/8 yard (8) 1 1/2” x 11 1/2”(8) 1 1/2” x 13 3/4”

CM0376 Holly BerryFairy Frost

1/6 yard(2) 1” x 32 1/2”(2) 1” x 33”(9) 1” squares

K2149 (Red)Krystal

1/2 yard (6) 2 1/2” x W.O.F. - binding

DC5153 SantaDot to Dot

Fat 1/8 (9) 2 1/2” squares

* Use border and 2 1/2” of the print

** Use 2 1/2” of the print and the remainder in the border design as shown.

Also Needed:

54” x 60” backing, 54” x 60” batting, threads to match, scissors, straight pins,

acrylic ruler, rotary cutter, and mat.

Materials

“Pixie Wood Squares” Quilt by Marinda Stewart

Size: Approximately 48” x 54” Skill Level : Confident Beginner

Disclaimers

This pattern is provided as a courtesy to quilt stores, catalogs, and quilters. Michael Miller Fabrics, LLC is not responsible for the accuracy of any kits packaged to accompany this pattern. Please direct any inquiries to the kit maker.

Yardage requirements for this pattern may allow for excess yardage to accommodate specific placement of motifs or to allow for any fussy-cutting to achieve the finished quilt design.

While every attempt has been made to give accurate measurements, yardage requirements, and construction directions; this does not allow personal variations in measuring, cutting, and or sewing. The enclosed directions were used in the construction of the original quilt.

Directions Sew one CX5473 1” x 10 1/2” piece to the top and bottom of each CX5474 10 1/2” x 10 3/4” piece. Sew one CX5473 31” x 11 3/4” piece to each side.

Sew one CX5477 1 1/2” x 11 1/2” piece to the top and bottom of each square. Sew one CX5477 1 1/2” x 13 3/4” piece to each side.

For the cornerstones machine applique (1) CM0376 1” square to the center of each DC5153 2 1/2” square. Make (9) total.

For the sashing rows, begin and end with one DC5153 2 1/2” square and alternate with (2) CX5475 2 1/2” x 13 3/4” pieces. Make (3) total. Set aside.

Beginning and ending with a CX5475 2 1/2” x 13 1/2” piece alternate with two blocks. Make (2) rows. Keep motifs upright in vertical rows.

Sew the rows together begin with a 2 1/2” sashing strip. Alternate with the two vertical block rows. End with a sashing strip to make one 32 1/2” x 33” piece as shown.

Sew one CM0376 1” x 32 1/2” piece to the top and bottom of the quilt. Sew one CM0376 1” x 33” piece to each side.

Sew one CX5475 10 3/4” x 33 1/2” piece to the top and bottom of the quilt. The print edge should be the outside edge of the quilt.

Sew one CM5474 8” x 10 3/4” rectangle to the top and bottom of each CX5475 8” x 34” strip. Keep motifs upright. Make 2. Sew one to each side of the quilt as shown.

Layer backing, batting, and quilt top. Baste.

Quilt as desired.

Bind quilt using K2149 2 1/2” strips pieced as needed for length.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.