datasheet triol tm
TRANSCRIPT
-
8/16/2019 Datasheet Triol TM
1/4
-
8/16/2019 Datasheet Triol TM
2/4
TM01
Downhole sensors of Triol Corporation are specially de-
signed to monitor oil well and ESP operation parameters
with its further transfer to VSD controller. Telemetry sen-
sors help to optimize oil production and protect ESP in-
stallation. Motor temperature sensors can easily operate
under a wide range of temperatures, that’s why they are
called reliable and secure.
Pump monitor sensors help to optimize and facilitate
operation process for Customer convenience. It allows
reducing oil wells down time, getting actual information
about the well operation and its immediately analyzing.
Downhole system provides total control and safe opera-
tion of the dual ESP installation.
The downhole sensor system is a set of equipment for col-
lecting and processing data over the state of the well and
optimizing the installation of the submersible pump. Theefficiency of application and, so as well, durability of the
equipment is mostly dependent on the correct definition
of technical specifications and selection criteria.
Advantages of applying Triol Corporation’s
downhole measuring sensors:
a) Stainless steel corrosion-resistant downhole unit;
b) Base oil temperature up to 150 °C (302 F);
c) Nonvolatile memory.
Electric submersible
motor #2
Transformer
Junction Box
Pipeline layout
Downhole Sensor
Thru shaft
Electric submersible
motor #1
High-Voltage Choke
VSD Triol AK06
Surface panel
Tubing
Downhole Sensor
Extension/-
Electric submersible
pump
Downhole Sensor
Thru shaft
Downhole SensorExtension/ Downhole
Sensor Basic
-
8/16/2019 Datasheet Triol TM
3/4
Downhole Sensor Basic Downhole Sensor Thru sha Downhole Sensor Extension
Measurement winding tem-
perature (oil) ESP0...+220 °С (32...428 F);
ESP intake formaon uid
temperature0...+200 °С (32...392 F);
ESP discharge formaon uid
temperaturenone; 0...+200 °С (32...392 F);
ESP intake formaon uid
pressure
0...5880 psi - standard (8700 psi - oponal);
ESP discharge formaon uid
pressurenone; 0...5880 psi;
Vibraon amplitude at axis
X, Y, Z0...30 m/s² (0...89.5 ft/s²);
Acceptable weight of addi-
onal equipment1 500 kg (3 307 lb);
Submergence depth 3 500 m (11 483 ft);
Degree of protection min. IP68;
Size95 mm (3.75’’); 95 mm (3.75’’), 116 mm (4.56’’), 137 mm (5.4’’), 143 mm (5.62’’);
Features
Downhole Sensor Basic with
standard modicaon is spe-cially designed to monitor oilwell and ESP operaon param-eters with its further transferto VFD controller. It helps toopmize oil producon andprotect ESP installaon.
Downhole Sensor Thru sha can
be easily integrated in the dual ESPinstallaon. It operates under thepressure of 500 atm (7 348 psi).The use of this downhole systemprovides total control and safe op-eraon of the dual ESP installaon,increases nonfailure operang meand reduces energy consumpon onthe uid liing.
Downhole Sensor Extension with
the temperature and uid pressuremeasurement at the pump dischargeprovides ESP operaonal modes con-trol and pump technical parametersevaluaon. It also allows avoidingsaline deposit at the ESP workingbodies.
2. TM01 Downhole Sensor Extension (TM01-05) with the temperature and fluid pressuremeasurement at the pump discharge provides ESP operational modes control and pump
technical parameters evaluation. It also allows avoiding saline deposit at the ESP working bodies.
3. TM01 Downhole Sensor Thru shaft (TM01-06) can be easily integrated in the dual ESP installation. It
operates under the pressure of 500 atm (7 348 psi). The use of this downhole system provides total control and
safe operation of the dual ESP installation, increases nonfailure operating time and reduces energy consump-
tion on the fluid lifting.
1. Triol TM01 Downhole Sensor Basic (TM01).
Currently Triol TM is compatible with the following sizes of ESP:
• 96, 103, 117, 130 — for motors by most producers;
• A450 — downhole sensor for docking with ESP made in the USA, Centrilift series 450, 562, 725;
• C450 — downhole sensor for docking with the ESP Reliant Series 450, made in China;
• A375 — downhole sensor for docking with ESP made in the USA, Centrilift 375 series.
Triol TM Line modifications
Ability to work with different dimensions of the pump and motor
-
8/16/2019 Datasheet Triol TM
4/4
Displayed parameters (measurements units)
Pressure (Intake and discharge) / psi or atm;
Temperature (Motor wining, Intake oil temperature, discharge oil temperature)/ F or °C;
Insulaon resistance / Om;
Leakage current /mA;
Voltage 660 … 5000 V;
Voltage-saturation current 70 mА;
Protection degree IP54/ NEMA4/ NEMA4X;
Category temperature range -20 ... +60 °C.
1) electrical property;
2) temperature resistance, high heat distortion temperature;
3) mechanic and chemical property;
4) weatherability;5) wear property;
6) moldability;
7) high resistance to fuels, oil, fats and many solvents.
High-Voltage Choke is characterized by
Ambient temperature - 60 ...+75 °С (-76...167 F);
Protection level IP54/NEMA4/NEMA4X;
Interfaces RS 232 and RS 485 at 9600 bps;Display LCD indicator 320Х240;
Remote monitoring and control system (Triol IDrive system )Router МТ01;
Surface panel specification
Triol TM surface panel is characterized by im-
proved protection compared with the baseline per-formance. It is suitable for outdoor operation under a wide
range of temperatures; it reliably acquires data from the downhole
unit and transfers data to controller of VSD. Triol TM surface panel is lo-
cated on the outer side of VSD.