Technical Datasheet

MPP Film Power Capacitors (Box) Item Number : VAC070812 Construction

� Dielectric: Metallized Polypropylene film

� Electrode: Metallized Film

� Connection:∆

� External Discharge device: Resistor

� Encapsulation: Liquid resin / Dry resin

� MS Container : Powder Coated

� RoHS Compliant

Terminals:

� Tin Plated Brass terminals.

Typical Applications: � For Industrial Power factor correction applications

Features: � Conforms to IEC 60831-1+2:1996

� Bureau of Indian Standards License No.CM/L 6700260

� Low dissipation factor

� High insulation resistance

� NPCB(Non- polychlorinated biphenyl) compliant

Safety:

� Over pressure disconnector ( Burst Proof)

� Self-healing properties

� Protection: IP 40 with top cover

� Discharge Device

Installation Features:

� Indoor, Vertically mounted

� Clamps for earthing and Mounting"

Marking / Identification Label � Viz logo � 3 Phase

� Rated voltage

� Rated Current

� SH- MPP

� Discharge Device :

� Date of Manufacture

Technical Datasheet

(Box) Burst Proof Design

1

olypropylene film

External Discharge device: Resistor

/ Dry resin

Power factor correction applications

:1996 & IS 13340:1993

of Indian Standards License No.CM/L 6700260

polychlorinated biphenyl) compliant

Over pressure disconnector ( Burst Proof)

Clamps for earthing and Mounting"

Rated Frequency

Serial number

Rated Kvar

Rated Current ∆ Connection

ISI Mark

Over pressure Disconnector ≠

Design

Technical Datasheet

MPP Film Power Capacitors (Box) Burst Proof Design

2

Delivery Mode:

� Single stacking arranged Packing

Electrical Characteristics:

� Reference Standard : IEC:60831-1+2 & IS:13340/41

� Rated Kvar : 1KVAr To 50 KVAr

� No of Phases : 1Ø and 3Ø

� Capacitance tolerance : -5 To + 10 %

� Rated voltage VR : 250Vac To 660Vac

� Inrush current I : Up to 150* IR

� Over Voltage Vmax : VR *1.1 Continuos

� Over Current I max : Up to 1.5 * IR

� Rated Frequency FR : 50 / 60 Hz

� AC test Voltage terminal to terminal : 2.15 x VR ,2s (Routine test) : 2.15 x VR ,60s (Type test)

� AC test Voltage terminal to can : 3 KV AC ,10s

� Discharge time : < 50 V within 60 seconds.

� Losses (tan δ) Dielectric : 0.0002 Total : 0.00045**

� Temperature Category : -10/D

Authorised by: Product Design & Development Dept Date: 07.08.2012 Viz Technologies Pvt Ltd Rev: 00

Important notes:

1. KVAr ratings and rated voltages can be customized as per customer requirement. 2. We always try hard to improve our products Quality. Thus, the products explained in this Data sheet may change from time to time. The same is true of the corresponding product specifications. 3. Please check the product descriptions and specifications mentioned in this datasheet are still applicable

before or when you place an order.

4. Ratings and container dimensions can be changed as per customer requirement

Technical Datasheet

MPP Film Power Capacitors (Box) Burst Proof Constructions: (Plastic Top)

Burst Proof Constructions: (Metallic Top)

Technical Datasheet

(Box) Burst Proof Design

3

Burst Proof Constructions: (Plastic Top)

Burst Proof Constructions: (Metallic Top)

Burst Proof Construction: Before fault operation

Burst Proof Construction: After fault operation

Internal construction: Overpressure disconnector

Internal construction: Expandeble bellow

Internal construction: MPP film with self healing propertise.

Burst Proof Construction: Before fault operation.

Burst Proof Construction: After fault operation. Capacitor failed safely with burdge top.

Contacts connected (Intact) Before fault operation.

Burst Proof Construction: After fault operation.

Design