datasheet (1)
TRANSCRIPT
New Products
2008.07 #03 New Products and Technology
SearchSearchEmbedded ideasVisit our website for the latest product information
■ LED Drivers for LCD Backlights
■ TV Encoders with Built-in AIE
■ High Brightness LED Numerical Displays
■ High Heat Dissipation White LEDs for Illumination
■ Ultra-compact Multi-diode Packages
■ Thin, Compact Tantalum Capacitors
■ Low ON-resistance Power MOSFETs
■ CMOS LDO Regulators for Portables
■ Three-channel Programmable Clock Generators
■ I2C Bus Serial EEPROMs
■ High Precision Detection Illumination Sensor ICs
■ 7V H-bridge Drivers (Single Channel Type)
■ Thermal Printheads with Protective Ultra-low Friction Film
■Wireless Audio Link ICs
■ 0402-size Chip Resistors
■ Optical Surface Mount Four-way Detection Sensors
■ High Voltage Resistance AC/DC Converter Modules
■ Ultra-compact Tantalum Capacitors
Reduces energy consumption and prolongs battery life
Compact, low ON-resistance 1.5V drive MOSFET
Notebook PCsHD movie camerasHDD recordersGames
Clear, precise video signals for colorful, high resolution image generation on large screens.
High definition video reproduction with no deterioration, even with 20m HDMI cables.
HDMI Switch IC / Buffer ICRestores degraded video signals in large screen TVs and monitors
ProjectorsDesktop PCsHD TVs
Catalog No.51D5972E 07.2008 ROHM ©
Energy Saving! ECO Devices
www.rohm.com/products/lsi/motor/h_bridge/
Visit ROHM’s website for additional support and product information
H-bridge driver series page
We provide a variety of support tools, including applications notes, SPICE models, datasheets, environmental data, and quality and reliability test results.
ROHM H-bridgeH-bridge
Driver SeriesHome
Pag
Product Page
Serch
PackageViewable inPDF format
Necessary when designing applied systems
Application Notes(Registration required)Solutions are provided for a varietyof applications based on the set requirements and basic functions of the product.
Circuit Simulation Model
Design Model(Registration required)A SPICE model text file is availablefor use in the customer’s simulation environment.
Printouts available on A4 sized paper
ConstituentMaterials List
Essentialfor circuit design
Data Sheets(Technical Notes)Electrical characteristics and detailed infor-mation available
ConstituentMaterials ListViewable inPDF format
Sorting is possible based on voltage resistance, output current, numberof channels, package type, and surface area. Find the optimum product fromour extensive lineup.
Order direct from ROHM
Order samplesROHM has a special page for sampleordering
Find compatible ROHM products from competitorpart numbers
Cross ReferenceCross-reference ROHM’s extensivedatabase for suitable products
Notebook PCsHD movie camerasHDD recordersGames
ProjectorsDesktop PCsHD TVs
ControlLogic
DDCL/S
DDCL/S
DDCL/S
DDCL/S
Rx AMP with EQ
INPUT1
INPUT3
INPUT2 OUTPUTRxAMPwithEQ
TxDriver
Rx AMP with EQ
〈 3 to 1 Switch 〉HDMI Switch IC
Clear, precise video signals for colorful, high resolution image generation on large screens.
High definition video reproduction with no deterioration, even with 20m HDMI cables.
Restores degraded video signals in large screen TVs and monitors
HDMI Switch IC / Buffer ICAmid the variety of full HD devices centered around high-definition broadcast reception
HDMI has emerged as the de facto transmission standard for connecting devices. ROHM has
developed the world’s first HDMI switch IC/buffer IC capable of stable video output – even with
20m long cables. The goal was to provide a monolithic solution integrating specialized circuitry
that restores decayed signal waveforms in large televisions and monitors along with a switch
for HDMI terminal devices.
2008.07 Embedded ideas #03
Stable HDMI transmission, even in large screen TVs and monitorsThe inclusion of HDMI terminals in various locations on TVs
and monitors has become more and more commonplace. This,
along with the increasing size of screens, has in many cases
made the distance between the image processor and the HDMI
receiver farther, resulting in greater noise and EMI generation,
necessitating buffer ICs, especially in large TVs (32″ to 40″ and
above).
Restores degraded video signalsIn many cases cables with lengths far exceeding 10m may be
required for wall mounting thin-screen TVs or installing projectors
on the ceiling. However, the longer the cable transmission length
the greater the RF waveform decay, possibly resulting in incorrect
transmission. In response to this ROHM integrates an equalizer
that restores the deteriorated input waveform to its original state
(Figure 1), enabling compatibility with 20m cables.
Figure 1. Waveform Restoration by Equalizer Circuit
1
COVER STORY
“HDMI,” the HDMI logo, and “High-Definition Multimedia Interface”are trademarks of HDMI licensing LLC.
Features of ROHM’s HDMI switch IC/buffer IC:
① 1080p Full HD, compatible with RGB 12-bit color depth
② HDMI Ver. 1.3a compl iant, 2.25Gbps high speed transmission
③ Built-in equalizer ensures support for long cables (20m)
④ Stable HDCP communication with built-in DDC buffer for easy compliance
⑤ 10kV+ ESD resistance (HBM)
Input Waveform Output Waveform
Distorted eye pattern, reduced amplitude
Eye pattern restored, along with the amplitude
Measurement instrument: Digital signal analyzer DSA80000B
Easy content protectionWith HDMI transmission hot plug verification and code key
exchange are performed approximately every two seconds.
In addition, a content protection function called HDCP (High
Bandwidth Digital Content Protection) is built in to prevent illegal
copying. ROHM also integrates a DDC buffer that performs
waveform shaping for stable HDCP operation and easy compliance
(Figure 2).
Waveform With DDC BufferWaveform Without DDC Buffer
Measurement Instrument: MS06104A Mixed Signal Oscilloscope
Figure 2. HDCP Signal Comparison With/Without DDC Buffer
HDMI – as easy to use as USBHDMI requires high ESD resistance since it
is an external interface and insertions and
removals are relatively common. ROHM
provides ESD resistance exceeding 10kV
(HBM), reducing the number of components
required.
The future of HDMI switch/buffer ICsAs the number of HDMI-compatible devices increases comes a
demand for more input terminals. ROHM meets this growing need
by providing for a greater number of terminals. Memory is also
integrated for recording image and sound metadata called EDID
(Extended Display Identification Data), contributing to greater
space savings.
Notebook PCsHD movie camerasHDD recordersGames
ProjectorsDesktop PCsHD TVs
ControlLogic
DDCL/S
DDCL/S
DDCL/S
DDCL/S
Rx AMP with EQ
INPUT1
INPUT3
INPUT2 OUTPUTRxAMPwithEQ
TxDriver
Rx AMP with EQ
〈 3 to 1 Switch 〉HDMI Switch IC
2008.07 Embedded ideas #03 2
HDMI Switch IC/Buffer IC LineupPackage < Size >P a r t N o .
BU16020KV
BU16018KV VQFP80<12 x12mm>
VQFP100<14 x14mm>
BU16028KV
BU16006KV
VQFP64<10 x10mm>
BU16024KV VQFP48<8 x8mm>
☆:Under Development
BU16027KV
Equalizer Deemphasis Output
Yes
Yes
Yes
Yes
ESD (kV)
10
10 Yes
YesAlways ON
YesAlways ON
YesAlways ON
Switching Format
GPIOI2C
GPIO
GPIO10
DDC Buffer
Yes
Yes
Data Rate (Gbps)
2.7
2.25
2.25
2.25
Termination Sensing Compatibility
Yes,coupled with HPD_SINK
Yes (with built-in EDID RAM)
Yes,coupled with HPD_SINK
Yes,not coupled
with HPD_SINK
Yes,coupled with HPD_SINK
Yes,coupled with HPD_SINK
Yes,coupled with HPD_SINK
2 to 1 Switch
3 to 1 Switch
4 to 1 Switch
1 to 1 Buffer
Yes10
Hot Plug Control
Yes
Yes
Yes
Yes GPIO Yes
2.25 Yes10 YesYes - Yes
Yes
Power Supply Voltage (V)
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6 GPIO10 Yes2.25 Yes
☆
DDC Line Standard L Level Value
The margin is greater than 1V
GNDGND
Only a margin of around 0.5V exists
1.5V
L level standard value of DDC line
COVER STORY
For inquiries regarding the HDMI switch IC/buffer IC or for sample requests, please contact a sales representative or use the “Inquiry Form” on our website (address below).http://www.rohm.com/support/
Energy Saving! ECO Devices
1.5V drive MOSFETs for portable devices
ECOMOS™ series
Power MOSFET requirementsPortable device development has reached a point where a dizzying
array of functions is built into a device no bigger than a palm.
‘Compact’, ‘lightweight’, and ‘long battery life’ have become much
more than mere catchwords – they often spell the difference
between success and failure for a portable product in the highly
competitive consumer electronics sector. ROHM offers components
that meet these needs without sacrificing functionality or reliability.
Drastically reduced MOSFET ON-resistance
Ideally, the power consumption for power MOSFETs used as ON/
OFF switches on power supply lines to circuit blocks 0W. However,
this is not the case due to the internal ON-resistance (P(loss)
= RDS(on) × I2). Therefore, reducing ON-resistance is critical for
reducing power consumption. ROHM’s ECOMOS™ series features
a submicron cell pitch structure, developed using microfabrication
technology. This increases current capacity per unit area to
approximately 2.5 times that of conventional products, resulting in
lower ON-resistance. The lineup is offered in several voltage ratings
for optimum compatibility.
Low 1.5V driveConventional ON/OFF switches in 1.5V power lines use step-up
drives with level shift circuits or bipolar transistors to drive 1.8V or
2.5V power MOSFETs, increasing power consumption. However,
ROHM, through process optimization, has achieved a Gate-Source
voltage drive (VGS) of 1.5V, enabling direct drive from 1.5V lines,
reducing not only power consumption but the number of external
components. In addition, using low-voltage drive contributes to a
reduction in the ON-resistance of other drive voltage regions (VGS =
1.8V/2.5V/4.5V), making it is superior to conventional 1.8V and 2.5V
drive power MOSFETs (Figure 1).
Power consumption reduced up
to 60% during ON state
mO
N-r
esis
tanc
e
Drive Voltage
Conventional Product (2.5V Drive)
1.5V Drive
Figure 1. VGS–RDS(on) Characteristics Comparison: 2.5V Drive vs. 1.5V Drive
ROHM’s ECOMOS™ is a power MOSFET specifically designed for use in the power circuits of portable devices. Special
emphasis was made to reduce power consumption by significantly reducing ON-resistance during operation for longer
battery life. Every effort was made to minimize environmental impact, including the use of halogen-free resins.
Reduces power consumption and prolongs battery life
Compact, low ON-resistance 1.5V Drive MOSFETs
2008.07 Embedded ideas #033
Using ROHM ECO Devices save energy and reduce CO2 generation
Compact, high-power package with high heat resistance
Recently batteries have become more compact and thinner,
while increasingly precise heat design dissipates heat generated
by the power MOSFET outside of the case. In response to this
trend ROHM has developed new compact, high power packages
optimized for battery charge control compatible with several
hundred mW. (Figure 2)
TSMT6(2.9×2.8×1.0㎜)
TUMT6(2.0×2.1×0.85㎜)
TSMT8(3.0×2.8×0.8㎜)
NEWPermissible LossIncreased 20%(1.25W⇒1.5W)
ON-resistance Reduced 77%
TSST8(3.0×1.9×0.8㎜)
WEMT6(1.6×1.6×0.6㎜)
Mounting Area30% Smaller
Height20% Less
Mounting Area40% Smaller
Height30% Less
Figure 2. Packages Optimized for Portable Devices
Ideal circuit for portable devicesECOMOS™ offers a variety of advantages to the device designer
when used in various portable device circuitry, such as dual Pch
configuration for switching between the adapter and secondary
lithium ion battery in charge control blocks, or an integrated
Schottky barrier diode for reverse current prevention that simplifies
circuit design.
At ROHM we are involved in minimizing MOSFET voltages as
much as possible, presently to 1.2V and 1V. In addition, continual
progress is being made in the development of SiC (Silicon Carbide)
MOSFETs featuring dramatically lower ON-resistance and
increased voltage resistance.
2008.07 Embedded ideas #03 4
●Load Switch●Charge Control Switch ●Muting Circuit
ECOMOS™ Lineup
Nch RUM003N02
Package(mm)
P D (W) Polarity Part No. V DSS (V) ID (A)V GS =1.5V V GS =4.5V
0.15 Nch RUE003N02 20 0.3
0.15 20 0.3 1
0.7
0.7
0.7
1
10.15 20 0.3Nch+Nch EM6K6
RUF015N02 20
20
1.5
RUR040N02
0.8Nch
US6K4
2.5
Pch –12 –3
Nch 20 3.5
1 Pch –12 –3.5
Nch+Nch 20 1.5
Nch 20 41
Pch –12 –4
VMT3
EMT3
EMT6
TUMT3
TUMT6
TSMT3
TSMT61.25
TSMT81.5
TSST81.25
WEMT60.7
Nch 20 5
Pch
Pch
Pch
Pch+Pch
Pch+Pch
Pch+SBD
Nch+SBD
Pch+SBD
–12
–12
–12
–12
–12
–20
30
–20
–7
–5
19
49
48
110
180
8
21
19
44
80
170
280
–5
RUF025N02
RZF030P01
RUL035N02
RZL035P01
RZR040P01
RUQ050N02
RZQ050P01
RQ1A070ZP
QS8J1
RT1A050ZP
TT8J1
TT8U1
ES6U41
ES6U42
130
39
28
31
23
22
22
19
26
130
∗ 2
∗ 2
∗ 2
∗ 1
∗ 1
∗ 1
80
72
66
66
55
55
40
44
220 ∗ 1
220 ∗ 1
∗ 3
∗ 3
R DS (on) Typ.(mΩ)
240
570
*1 VGS=1.8V
*3 VGS=2.5V
*2 VGS=4V
1.2×1.2×0.5
1.6×1.6×0.7
1.6×1.6×0.5
2.0×2.1×0.77
2.0×2.1×0.77
2.9×2.8×0.85
2.9×2.8×0.85
3.0×2.8×0.8
3.0×1.9×0.8
1.6×1.6×0.6
–4.5
–2.5
–2.4
1.5
–1
A broad lineup of eco-devices, besides ECOMOS™, that contribute to reduced power consumption can be found on our website. www.rohm.com/ecodevices/
Energy Saving!
ECO DevicesProduct information
Illumination andLightning Products
Power Products Audio-relatedProducts
Products for LCDsMobile Phones /Portable EquipmentProducts
Power ManagementProducts
PC / PeripheralDevice Products
New Products
Optimize screen brightness Double-dimming system significantly reduces energy consumption6-2 LED drivers for LCD backlights
T h e B D 6 0 9 5 G U /GUL LED dr ivers for LCD backlights e n s u r e s o p t i m a l picture display with m i n i m a l e n e r g y
consumption. A dual-dimming system is employed that varies the brightness not only based on ambient conditions but according to the brightness of the content being displayed as well. The result? Maximum visibility with low power consumption.
Real-time video correction No microcontroller neededTV encoder with built-in AIE
The BU6520KV TV encoder with built-in AIE (Adaptive Image Enhancer) for hardware-based image correction is compatible with standard CCIR601/656 video input and was designed for simple replacement of conventional TV encoder ICs. Bright and dark areas are individually corrected for optimized
visibility. And the capability to automatically download AIE/TV encoder settings from an external EEPROM a l l o w s u s e w i t h o u t a microcontroller.
10 times brighter Clear display under any conditionHigh brightness LED umerical displays
The LAP/LBP series of LED numerical displays utilizes unique four-element high brightness LEDs, resulting in ten times the brightness of conventional displays (orange light emission ratio) with virtually no luminosity deterioration over a long period, even during continuous use.Restrict ing current to 1/10th the rated value makes the brightness equivalent to conventional displays, contributing to reduced power consumption. Ideal for a variety of applications, including FA devices, e n t e r t a i n m e n t equipment, and the like.
High heat dissipation package decreases thermal resistance and increases luminance by 25%High heat dissipation white LED for illumination
The PSML2 package wh i te LEDs fo r illumination feature an industry-best 7cd brightness in the mid-current range (100mA). Heat dissipation has been greatly improved th rough u t i l i za t ion o f a n e x p o s e d c o p p e r f rame w i th h igh hea t conductivity. The result is a heat dissipation of 60°C/W when mounted on an FR-4 substrate, increasing luminance and heat resistance 25% over conventional products.
World’s smallest class Versatile configurationUltra-compact multi-diode packages
Two PIN diode package arrays are now available – HMD8, featuring 8 pins, for up to 4 chips, and HMD12, with 12 pins and up to 6 elements. Employing a unique chip device structure and ultra-precision machining technology makes it possible to arrange different types of diode chips and wiring configurations in a single package, resulting in greater design flexibility.
35V voltage resistance 3216-sized tantalum capacitorsThin, compact tantalum capacitors
A new high voltage resistance (35V) model has been added to the venerable TCTAL series of thin (1.1mm), compact 3216-sized tantalum capacitors optimized for noise suppression in power source circuits for LCD modules, organic EL modules, and other high drive voltage applications requiring a high performance, low profile s o l u t i o n . T h e e n t i r e lineup is halogen-free, lessening the impact on the environment.
High current MOSFETs Low ON-resistance, high efficiencyLow ON-resistance power MOSFETs
The RSS, SP8K6□, SP8J6□, and SP8M6
□ series represent new additions to ROHM’s expansive MOSFET lineup. Designed for lower ON-resistance (Nch/Pch: 20%/40% lower) and featuring a wide current range (Nch: 7-18A, Pch: 4-14A), they are ideal for a wide range of appl icat ions, including DC/DC converters, motor drives, inverters, and load switches.
High-speed load response Ideal for memory and logic ICsCMOS LDO regulators for portable devices
The BU□□TA2WNVX series of CMOS LDO regulators for portable devices were designed to deliver stable voltage, even with high load currents. Memory or logic ICs that perform reading, writing, and processing of data based on an operation clock require high load
currents when wri t ing data. ROHM util izes a full CMOS process and opt imized high-speed amplifier, resulting in 5 times the load response of conventional products.
Three clocks on a single chip Reduces the number of components and saves spaceThree-channel programmable clock generator
The BU7331EKN clock generator integrates three different clocks on a single chip. Various clock settings can be programmed via serial
interface, and high-precision clock setting is possible for simultaneous output. The result is less frequency interference between clocks, fewer external components, and smaller mounting area.
[Embedded Ideas] www.rohm.com/ei/
2008.07 Embedded ideas #035
ProductCode
01
ProductCode
02
ProductCode
03
ProductCode
04
ProductCode
05
ProductCode
06ProductCode
09
ProductCode
08
ProductCode
07
Ideal for battery-driven applications High-reliability 1.7V EEPROMSerial EEPROM with I2C bus compatibility
T h e B R 2 4 S□□□ series of I2C bus serial E E P R O M s f e a t u r e high-speed operation (>400kHz) ove r t he entire operating voltage
range (1.7V to 5.5V). Compatibility with the global standard I2C bus interface enables complete control using two ports, a serial clock (SCL) and a serial data (SDA) line. High reliability is ensured through a unique double-cell structure for redundant operation, a built-in double-reset function, and gold pads and wires.
Energy saving brightness sensor Light sensitivity variation ±15%High precision detection type brightness sensor IC
A high-precision detection type brightness sensor has been developed that integrates a dimming function with spectral sensitivity close to the human eye for reduced power consumption and greater visibility. Unique laser trimming technology enables high-precision light adjustment, resulting in a light sensitivity tolerance of ±15%. The lineup includes the BH1603FVC, an easy-to-use analog type sensor with excellent linearity characteristics
be tween cur ren t and brightness, and the BH1715FVC, a digital type model t h a t s i m p l i f i e s connection to digital I2C bus systems.
Power consumption reduced 40% Low consumption PWM drive with new VREF input7V H-bridge driver (Single channel type)
The new BD621□ series of H-bridge drivers integrate a VREF-PWM duty conversion circuit that converts the input voltage to PWM, r e s u l t i n g i n h i g h eff iciency and low power consumption. A diode is also built in for surge absorption.
First anti-stick printhead in the industry* Increased abrasion life and print qualityUltra-low friction thermal printheads
The SE-DC94A series of thermal printheads feature an ultra-low-friction protective film specifically designed to mitigate adhesion (sticking phenomenon) between the printhead and recording media, result ing in less abrasion and longer life. A unique step-free structure is also utilized for improved contact, greater reliability, and superior image quality.(* Based on a June 2008 ROHM study)
Broadcast quality with text transmission capability Globally compatible FM transmitterWireless audio link IC
The RDS-compatible BU2682MUV is the newest addition to ROHM’s extensive l ineup o f marke t -
tested wireless audio link ICs for high quality FM audio transmission. RDS capability makes it easy to send text information to an existing FM receiver, such as song titles and artist names. Both RDS and RBDS functionality are built in for compatibility in Europe and the US.
The world’s smallest class (0402 size) High dimensional precision for stable mounting0402-sized chip resistors
The new MCR004 series of chip resistors are offered in the 0402 size, making them among the smallest in the industry – 56% smaller and 72% lighter than conventional 0603-sized products. In addit ion, high external dimensional precision (±20µm) has been achieved through microfine processing
technology, simplifying installation. The entire series is also halogen-f r e e , l e s s e n i n g the impac t on the environment.
Ideal for device position detection Reflow-compatible surface-mount packageOptical surface mount four-way detection sensor
The RPI-1031, a new surface mount optical four-way detection sensor, is neither susceptible to vibration nor magnetic fields, making it superior to both mechanical and magnetic sensors. It is ultra-compact (3.9mm square) and ultra-light (67mg), enabling mounting in a variety of devices.
Wide input voltage range Ideal for unstable power regions High voltage resistance AC/DC converter module
The BP5055-12 is a new high voltage resistance AC/DC converter featuring a wide input voltage range, from −240V to −600VDC (AC conversion: 170V to 425V). It provides ample freedom of design for regions with unstable power sources. 77% efficiency has been achieved through the use of a switching power source. And its transformerless configuration makes it both compact and
l ightweight, whi le the negative output ensures compatibility with TRIAC devices.
1005-sized tantalum capacitorsUltra-compact tantalum capacitors
The TCTU series of tantalum capacitors, available in the 1005 size, is optimized to suppress coupling and noise in audio and power supply circuits while eliminating the ringing and capacitance drops prevalent with ceramic capacitors. Capacitance ranges from 1.0µF to 4.7µF, with further expansion planned. In addition, all products are halogen-free, reducing the impact on the environment.
2008.07 Embedded ideas #03 6
11
www.rohm.com/eior
www.rohm.com/ei/03 **
Enter the Product Code in the box(For 01 www.rohm.com/ei/0301)
For additional details, please visit our website below
New Products [Embedded Ideas] www.rohm.com/ei/
Embedded ideas website
Smallest in its class
1.0x0.5mmt=0.55mm Max.
TCTU series
Small as nail beads
ProductCode
10
ProductCode
11
ProductCode
12
ProductCode
13
ProductCode
14
ProductCode
15
ProductCode
16
ProductCode
17
ProductCode
18
New Products
2008.07 #03 New Products and Technology
SearchSearchEmbedded ideasVisit our website for the latest product information
■ LED Drivers for LCD Backlights
■ TV Encoders with Built-in AIE
■ High Brightness LED Numerical Displays
■ High Heat Dissipation White LEDs for Illumination
■ Ultra-compact Multi-diode Packages
■ Thin, Compact Tantalum Capacitors
■ Low ON-resistance Power MOSFETs
■ CMOS LDO Regulators for Portables
■ Three-channel Programmable Clock Generators
■ I2C Bus Serial EEPROMs
■ High Precision Detection Illumination Sensor ICs
■ 7V H-bridge Drivers (Single Channel Type)
■ Thermal Printheads with Protective Ultra-low Friction Film
■Wireless Audio Link ICs
■ 0402-size Chip Resistors
■ Optical Surface Mount Four-way Detection Sensors
■ High Voltage Resistance AC/DC Converter Modules
■ Ultra-compact Tantalum Capacitors
Reduces energy consumption and prolongs battery life
Compact, low ON-resistance 1.5V drive MOSFET
Notebook PCsHD movie camerasHDD recordersGames
Clear, precise video signals for colorful, high resolution image generation on large screens.
High definition video reproduction with no deterioration, even with 20m HDMI cables.
HDMI Switch IC / Buffer ICRestores degraded video signals in large screen TVs and monitors
ProjectorsDesktop PCsHD TVs
Catalog No.51D5972E 07.2008 ROHM ©
Energy Saving! ECO Devices
www.rohm.com/products/lsi/motor/h_bridge/
Visit ROHM’s website for additional support and product information
H-bridge driver series page
We provide a variety of support tools, including applications notes, SPICE models, datasheets, environmental data, and quality and reliability test results.
ROHM H-bridgeH-bridge
Driver SeriesHome
Pag
Product Page
Serch
PackageViewable inPDF format
Necessary when designing applied systems
Application Notes(Registration required)Solutions are provided for a varietyof applications based on the set requirements and basic functions of the product.
Circuit Simulation Model
Design Model(Registration required)A SPICE model text file is availablefor use in the customer’s simulation environment.
Printouts available on A4 sized paper
ConstituentMaterials List
Essentialfor circuit design
Data Sheets(Technical Notes)Electrical characteristics and detailed infor-mation available
ConstituentMaterials ListViewable inPDF format
Sorting is possible based on voltage resistance, output current, numberof channels, package type, and surface area. Find the optimum product fromour extensive lineup.
Order direct from ROHM
Order samplesROHM has a special page for sampleordering
Find compatible ROHM products from competitorpart numbers
Cross ReferenceCross-reference ROHM’s extensivedatabase for suitable products