data sheets of bluttooth music led ceiling lamp
DESCRIPTION
it is Bluetooth Music LED Ceiling Lamp, as long as you have the bluetooth digital device, you can use it with lamp and go for music, This lamp is suit for the bedroom, Bathroom,Studying Room,and other similar places,depending on the controller,you can easy to adjust the lamp color temperature and brightness,at the same time,through the inside Bluetooth on lamp,it can play the music which come from the phones,PC,and other digital devices’ music which has bluetooth function,bring you the one soft,healthy,happy comfortable time.TRANSCRIPT
Bluetooth mucisc LED Ceiling Lamp
Data Sheet of Instructions
Lightac Industry Co.,LimitedSupplier of idea energy saving LED Lamp
Index
1. General introduction------------------------------------------32. Product Photo---------------------------------------------------33. Product parameter---------------------------------------------54. Product Description--------------------------------------------65. Packing List------------------------------------------------------76. Lamp Installtion-------------------------------------------------87. F&Q--------------------------------------------------------------12
-
1.General introduction
Thanks for choosing our series of bluetooth music LED Ceiling Lamp,Pleaserefer to this data sheet of instruction before using our lamp, to ensure thecorrect application you do.This lamp is suit for the bedroom, Bathroom,Studying Room,and other similarplaces,depending on the controller,you can easy to adjust the lamp colortemperature and brightness,at the same time,through the inside Bluetooth onlamp,it can play the music which come from the phones,PC,and other digitaldevices’ music which has bluetooth function,bring you the onesoft,healthy,happy comfortable time.
2.Product Photo
Lamp Pictures:
Plastic expansion
Self tapping screw
Lamp Body
-
Controller Picture:
ControllerPicture
on/offSleep mode
Bright+/ Sound+
Music Mode
Lamp Mode
CCT+/ Next Song
Entire Bright
Mode/Play Pause
CCE ‐ / PREV Song
Bright ‐ / Sound ‐
-
3.Parameter
Table
1
No. Part Bluetooth Music LED Ceiling Lampmain specification
1
WholeLamp
Whole LampWatts
< 35W,standby power<1W
2 Input Voltage 100~260VAC
3 Protection With overload 3A、short-circuitprotection
4 Power Factor PF≥0.9
5 Efficiency ≥85%
6 WorkingTemperature
-20~45
7
LampPart
Lamp Watts 3W~24W
8 CCT 3000K~6000K
9 On / off mode By hand、infrared remote control
11 IR ControlDistance
8m based on no obstacles
12
Audio(Music)
Horn 2.75inch
13 Rated Watts 8W
14 nominalimpedance
6Ω
15 FrequencyDistance
120Hz~20Khz
16 total harmonicdistortion
≤5%
17 BluetoothDistance
10m based on no obstacles
-
4.Product Description
4.1:Lamp Mode:
1. first to connect the power, LED lamp brightness is day white 100%,and thenyou can use the controller to adjust brightness and color temperature(CCT) whichyou want.2.Under any modes, you can directly press lamp mode to fast enter the mode theLED lamp,And the 4 navigating keys can adjust the brightness and colortemperature (CCT).3.On/off key is whole key function,that means you can turn on / off the LED lampand bluetooth under any modes
4.2:Bluetooth Mode:1.After LED Lamp connect the power, it will automatic open the bluetoothfunction,and then, turn on your phone or pad or such kind of the digitaldevices,search “DONNAHO” and connect,after success to connecting,it can playthe music on itself.2.Under any modes,press “bluetooth modes” key, it can fast to enter the bluetoothmodes,And the 4 navigating keys can adjust the sound and songs to play.3.Long time to press “on/off”key can dis-connect the bluetooth,and it can connectthe new devices of bluetooth4.Long time press “Bluetooth Mode” key can off the bluetooth function
4.3:Sleep Mode:1. Under any modes,press “Sleep Mode”key,it can fast to enter the sleep
mode,LED Brightness will be 20%
4.4:Entire Brightness Mode1. Under any modes,press”entire brightness mode”key, it can fast to enter the the
entire brightness,brightness will be 100%
-
5.Packing List
Table
2
No Part Quantity Specification Remark
1 Lamp 1 PCS
2 Plasticexpansion
4 PCS
3 Self tappingscrew
4 PCS ST4.2*16,Cross head Fix Lamp
5 Controller 1 PCS
6 Battery 1 Pair AAA/1.5V
8 Instructions 1 PCS
-
6. Lamp Installtion
※ Please prepare the screwdrive and electrodrill before the installation.
7.1天花板打孔、标识定位点
6.1 install pre-kit
First to make the hole by electrodrill,put the plastic expansion inside thehole,and tap into them.
P i c t u r e - 1
Plastic expansion &4PCS
-
6.2 Wiring
Connect the wire which come from the ceiling part
P i c t u r e - 2
Attention:Red or Brown connect “L”,Blue or Black Connect “N”;
-
6.3 Fixed
After the wire connect,and then fixed the bottom part with Self tapping screw
P i c t u r e - 3
-
6.4 Install all
After fixed bottom part install lamp shell and horn etc.
Picture- 4
-
7.F&Q
Question Answer
No soundPlease confirm the bluetooth is on,and connect issuccess,Please confirm if the sound is smallest.pleasepress the VOL+to increase the volume.
Can notfindBluetoothsignal
check if the bluetooth is under the fast flash
condition,if yes, bluetooth will do the checking ,please
search again the “DONNHOA”and connect it ,if ask the
code,please input”0000”
No bright Check i f connec t the power,to check if thesignal lamp is on when use controller.If confirm it connect the power, please check if the batteris on power for the controller.
Sound isnoisy
Please check the music file is OK. Replace with other digital devices to check if it is work Noisy may resu l t f rom message rece iv ing , Check if the installation is loosen.