TB2 E/S 630Max In (A) of Frame 630ModelNumber of PolesType

S4003, 4GE

Nominal current ratingsIn (A) 50°C 250

400

Electrical characteristicsRated operational voltage

Rated insulation voltage Rated impulse withstand voltage

Ultimate breaking capacity (IEC, JIS, AS/NZS)

Service breaking capacity (IEC, JIS, AS/NZS)

Rated breaking capacity (NEMA)

Rated short-time withstand current

Ue (V) AC 50/60 Hz 690DC -

Ui (V) 800Uimp (kV) 8

Icu (kA) 690V AC 20525V AC 30440V AC 65415V AC 70400V AC 70220/240V AC 100250V DC -

Ics (kA) 690V AC 15525V AC 30440V AC 50415V AC 50400V AC 60220/240V AC 85250V DC -

(kA) 480V AC 30240V AC 100

Icw (kA) 0.3 Seconds 5

Protection Adjustable thermal, adjustable magneticFixed thermal, fixed magneticMicroprocessorUtilisation category B

InstallationFront connection (FC)Extension bar (FB)Cable clamp (FW)Rear connection (RC)Plug-in (PM)DIN rail mounting (DA)Dimensions

Weight

••••-

height (mm) 260width (mm) 3 pole 140

(mm) 4 pole 185depth (mm) 103

weight (kg) 3 pole 4.34 pole 5.7

Operation Direct Opening ActionToggle operationDoor mounted (HS) / Breaker mounted handle (HB)Motor operation (MC)Endurance Electrical cycles 415V AC

Mechanical cycles 4,50015,000

••

Standard • Optional - Not Available

DATA SHEET: TEMBREAK 2 S400-GE

MCCB Electrical Characteristics to IEC 60947-2, EN 60947-2, JIS C 8201-2-1 ANN.1, AS/NZS 3947-2, NEMA AB-1

TemBreak2 S400-GE MCCB March 2018Page 1 of 4

With extension bars (optional)

With extension bars (optional)

30

30

Front connected

Rear connected

Front connected with Motor Operator

Rear connected with Motor Operator

DATA SHEET: TEMBREAK 2 S400-GE MCCB

Outline Dimensions S400-GE

ASL: Arrangement Standard Line HL: Handle Frame Centre Line

Page 2 of 4

11

8 (max.)

20 (max.)

Preperation of conductor

30 (max.)

Support or rail

Support or rail

Mounting screwM10x30 max.

Mounting screw M5 x 20

Mounting plate

90102

260

97

4

102113

48

138142

180

6t6t

198

258

65

276

90102

260

971

4

32

6t32

204208

246

12

1

Insulating plate

Mounting plate

Mounting M6 NUT

Insulating plate

Mounting screw M6x70

Mounting on a support or rails (shown with optional connection bars oriented for rear access)

Mounting through the backplate (shown with optional connection bars oriented for rear access)

Mounting on the backplate (optional connection bars must be oriented for front access)

Outline Dimensions Termination of Busbar

DATA SHEET: TEMBREAK 2 S400-GE MCCB

Outline Dimensions S400-GE Plug-in VersionASL: Arrangement Standard Line HL: Handle Frame Centre Line

Page 3 of 4

Percent Rated Current IRPercent Rated Current In

LT

ST

PTA

NP

Option

Standard

IR (A)LTD Pick-up current IR xIn 0.4 0.5 0.63 0.8 0.9 0.95 1.0

1Characteristics

Note(1) gF is not available when In is 250A. (2) Ii max. = 13 x In. (3) 1.0 x IR or 0.5 x IR can be selected. Characteristic of neutral protection (tN vs. IN) isidentical to characteristic of phase protection (tR vs. IR). (4) When you specify gF on MCCBs with 3 poles the terminal block is automatically fitted toconnect with the external neutral CT for 3 phases 4 wires system. See terminal blocks in section 4.

No. 2 3 4 5 6 711

2.5 5 100.20.1

14(Max: 13 x In) Note (2)0.840

1.0/0.5 Note (3)

tN=tRtN

IN

tpIpIi

tsd

Isd xIR

xIRxIR

xIR

(s)

(s)

gFNote(4)

0.20.2tg

Ig xIn(s)

(s)

tR (s)at 200% x IR at 600% x IR

21 21 5 10 19 29

INST

In = 400A; 250A Note (1)

Time/Current Characteristic Curves S400-GE

Page 4 of 4

DATA SHEET: TEMBREAK 2 S400-GE MCCB