data sheet rev-1 uu

1
23.49 28.02 5.4 Company:PT. Bahana Karya Mandiri Location:Jakarta Service of Unit: TEG Cooler Our Reference: Item No.:3-24-E01 Your Reference: Date: Rev No.: Job No.: 2.1 0.9024 Forced 1 126.9 kcal/h 9080 °C 3.5 60 86 kcal/(h m² C) TEG kg/h 499 °C kg/h kg/h kg/h kg/h cp 80 499 0 0 5.1764 kg/h 12580 m³/s Pa 101 m/s 2.85 kg/s/m² 3.3 m 0 °C 32 °C 34.99 °C 0 kg/m³ 1102.8 0.5525 1077.52 0.5772 0.00117 0.47887 °C bar 37.88672 kcal/kg 0.168 0.168 °C m² h C/kcal 0.00041 kgf/cm² 48.946 200 °C 2.1 1 4 1 51.96 Plug SA 516 GR 70 2 1 1 SS 316L 25.4 48 0.28 60 L-finned Aluminum 1060 57.15 433 1 0.63 1247 1.5 No 1247 1.65 mm m mm in 1 in mm kg 1 1 #/m °C m kcal/(kg C) kcal/(h m C) kcal/(h m C) kg/m³ kcal/(kg C) 47.78 499 0 12.3911 0 30 Degrees m m kW cp Area ratio Code hp Design Temp ) ) ( ( Min. Amb Blade(s) Specs RPM Angle Hub Bays par Speed Reducer, Type Mfr.&Model Rating No./Bay Support Ratio Louvers Wt.Bundle Steam Coil Min Thk. Driver, Type Mfr. RPM No./Bay V/Phase/Hz Enclosure Control Action on Air Failure- Drawing No. Wt. Unit Lng Fan,Mfr., Model No./Bay Pitch Dia. hp/Fan Blade(s) Degree Control of Outlet Process Temperature PI Plot Area Recirculation par Notes: Stamp No. OD Code Type Material Tks Pitch OD No./Bun Material Specifications Chem Cleaning Rating Special Nozzles TI Vibration Switches Surf.Prep Struct. Mount. Louvers MECHANICAL EQUIPMENT Inlet nozzle Outlet nozzle Corr. Allow. Gasket Mat. Passes Plug Mat. Type Material Bundle frame MISCELLANEOUS Bundles FIN Tube Rows Arrangement Number/bay Size Tube TUBE BUNDLE Header Design temperature Test Pressure Design pressure DESIGN-MATERIALS-CONSTRUCTION Fouling resistance Bubble / Dew point Specific Heat, Vap Therm. Cond, Liq Therm. Cond, Vap Latent heat Inlet pressure (abs) Freeze Point Pres Drop, Allow/Calc Density, Liq Density, Vap Specific Heat, Liq Design Ambient Temperature Out Temperature In Altitude Mass velocity Face Velocity Static Pressure Air Quantity/Fan Air Quantity, Total PERFORMANCE DATA - AIR SIDE Viscosity, Vap Viscosity, Liq Molecular wt, NC Molecular wt, Vap Water Steam Noncondensable Vapor Liquid Temperature In/Out In/Out Total Fluid Entering Fluid Circulated PERFORMANCE DATA - TUBE SIDE Clean Bare, Service Transfer Rate-Finned MTD, Eff Heat exchanged Bare area/bundle Number of Bays Type Surf/Unit-Finned Tube Size & Type 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 Air-Cooled Heat Exchanger Specification Sheet SA 105 Soft Material 0 N/A N/A N/A 100 ASME VIII/1, API 661 6th ED - - N/A 1 Paint Multi Wing 1440 5 36 1.5 ELECTRIC MOTOR BALDOR/WEG 1 1440 TEFC 380 3 50 N/A N/A N/A N/A N/A N/A YES 1.22 N/A

Upload: aan

Post on 17-Sep-2015

219 views

Category:

Documents


3 download

DESCRIPTION

yr

TRANSCRIPT

  • 23.4928.02

    5.4m

    Company:PT. Bahana Karya MandiriLocation:JakartaService of Unit: TEG Cooler Our Reference:Item No.:3-24-E01 Your Reference:Date: Rev No.: Job No.:

    2.1 0.9024 Forced 1126.9 m

    kcal/h9080 C3.5 60 86 kcal/(h m C)

    TEGkg/h 499

    Ckg/hkg/hkg/hkg/h

    cp

    80499

    00

    5.1764

    kg/h12580m/sPa101

    m/s2.85 kg/s/m3.3

    m0C32C34.99C0

    kg/m 1102.8

    0.5525

    1077.52

    0.5772

    0.001170.47887

    C

    bar 37.88672kcal/kg

    0.1680.168

    C

    m h C/kcal 0.00041

    kgf/cm48.946 200 C

    2.114

    1 51.96

    PlugSA 516 GR 70

    2

    11

    SS 316L

    25.448

    0.28

    60

    L-finnedAluminum 1060

    57.15433

    10.63

    1247

    1.5

    No1247

    1.65 mmm

    mmin

    1

    inmm

    m kg

    11

    #/m C

    m

    kcal/(kg C)kcal/(h m C)kcal/(h m C)

    kg/mkcal/(kg C)47.78

    4990

    12.3911

    0

    30 Degrees

    m

    m

    kW

    cp

    Area ratio

    Code

    hp

    Design Temp

    ))

    ((

    Min. Amb

    Blade(s)

    Specs

    RPM

    AngleHub

    Bays par

    Speed Reducer, TypeMfr.&Model

    RatingNo./Bay

    SupportRatio

    Louvers

    Wt.BundleSteam Coil

    Min Thk.

    Driver, TypeMfr.

    RPMNo./Bay

    V/Phase/HzEnclosure

    Control Action on Air Failure-

    Drawing No. Wt. Unit

    Lng

    Fan,Mfr., ModelNo./Bay

    PitchDia.

    hp/FanBlade(s)

    Degree Control of Outlet Process Temperature

    PI

    Plot AreaRecirculation

    par

    Notes:

    Stamp

    No.OD

    Code

    TypeMaterial

    Tks

    Pitch

    ODNo./Bun

    MaterialSpecifications

    Chem Cleaning

    RatingSpecial Nozzles

    TIVibration Switches

    Surf.PrepStruct. Mount.

    Louvers

    MECHANICAL EQUIPMENT

    Inlet nozzleOutlet nozzle

    Corr. Allow.Gasket Mat.

    PassesPlug Mat.

    TypeMaterial

    Bundle frameMISCELLANEOUS

    BundlesFIN

    Tube RowsArrangement

    Number/baySize

    TubeTUBE BUNDLE HeaderDesign temperatureTest PressureDesign pressure

    DESIGN-MATERIALS-CONSTRUCTION

    Fouling resistance

    Bubble / Dew point

    Specific Heat, VapTherm. Cond, LiqTherm. Cond, Vap

    Latent heatInlet pressure (abs)

    Freeze Point

    Pres Drop, Allow/Calc

    Density, LiqDensity, VapSpecific Heat, Liq

    Design AmbientTemperature OutTemperature InAltitude

    Mass velocityFace VelocityStatic PressureAir Quantity/FanAir Quantity, Total

    PERFORMANCE DATA - AIR SIDEViscosity, VapViscosity, LiqMolecular wt, NCMolecular wt, VapWaterSteamNoncondensableVaporLiquidTemperature

    In/Out

    In/OutTotal Fluid EnteringFluid Circulated

    PERFORMANCE DATA - TUBE SIDECleanBare, ServiceTransfer Rate-FinnedMTD, EffHeat exchanged

    Bare area/bundleNumber of BaysType

    Surf/Unit-Finned TubeSize & Type

    123456789

    10111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758

    Air-Cooled Heat Exchanger Specification Sheet

    SA 105Soft Material0

    N/AN/A

    N/A

    100ASME VIII/1, API 661 6th ED- -

    N/A1

    Paint

    Multi Wing1440

    536

    1.5

    ELECTRIC MOTORBALDOR/WEG

    11440

    TEFC380 3 50

    N/AN/AN/AN/AN/AN/AYES

    1.22

    N/A