Data Sheet

Printed : 24 August 2010 1/4 Data Sheet Ref:DS091204R0 Insight SiP – AGORA Einstein, 905 rue Albert Einstein - 06560 Sophia-Antipolis - France

The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission.

ISP091204 WHDI Transmit Display Mini Card

Features • Video transmission from PC to Large Screen TV or Projector

• WHDI Transmitter

• PCI SIG standard Display Mini Card • WHDI 1.0 compliance including HDCP 2.0 • 44.4 x 26.8 x 5 mm • Up to UXGA video quality • Includes 1080p 60 Hz • S/PDIF + 4 x I2S Audio 192 kHz 24 bit • Uses 5GHz ISM band • Power consumption 4W • Up to 10 bits per colour • MIMO Configuration

Description This module is based on the Robin platform developed by Amimon and Maxim-IC. The card makes use of a display port receiver to enable serial data from the display port to be transmitted over the 5GHz WHDI wireless link. This solution allows transmission of high quality video, without compression, over a distance of 10 to 50 m depending on the environment. The form factor of the module is compliant with the PCI SIG specification for the Display Mini Card (44.4 x 26.8 x 5 mm). The card operates as a plug-in add-on to any netbook PC equipped with the Display Mini Card interface. It uses 2x 5GHz antennas that may already be integrated into the netbook as part of the WiFi system. The key components in the module are the AMN2120 WHDI Transmitter Baseband Processor, Maxim’s MAX 2850, a suitable Display Port Receiver IC, a micro-controller and RF front end discrete components. Parts of the RF front end are integrated within the structure of the Mini Card to enable size optimization. The Display Port Receiver IC receives the Display Port data from the Netbook PC in 3 differential serial lines and passes the data in parallel format to the AMN2120 Baseband Processor. The Analog IQ data from the AMN2120 is used to drive the MAX2850 that creates the modulated RF signals that are sent over the air. Two separate transmit antennas are used in a MIMO configuration to optimize the link budget. Error correction data is sent back from the distant WHDI receiver and is handled by the MAX2850/AMN2120 chipset.

Data Sheet

Printed : 24 August 2010 2/4 Data Sheet Ref:DS091204R0 Insight SiP – AGORA Einstein, 905 rue Albert Einstein - 06560 Sophia-Antipolis - France

The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission.

Functional Block Diagram

Electrical Specifications

Power Supply at Tcase 90°C T ambient 65°C Parameter Value Unit

Supply voltage

Supply Voltage +3.3Vaux 3.3 V Max Current +3.3Vaux 1070 mA Max Current +1.5V 330 mA

RF characteristics Parameter Value Unit Max RF Output Power per channel

18 dBm

RF Power range 5 to 18 dBm

Max range (NLOS) 40 (TBC) m

Data Sheet

Printed : 24 August 2010 3/4 Data Sheet Ref:DS091204R0 Insight SiP – AGORA Einstein, 905 rue Albert Einstein - 06560 Sophia-Antipolis - France

The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission.

Mechanical Drawings

Data Sheet

Printed : 24 August 2010 4/4 Data Sheet Ref:DS091204R0 Insight SiP – AGORA Einstein, 905 rue Albert Einstein - 06560 Sophia-Antipolis - France

The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission.

Pin Connection Table Pin # Name Pin # Name

1 WAKE# (to uC via pull up/down) 2 3.3Vaux

3 COEX1 (to uC) 4 GND

5 COEX2 (to uC) 6 1.5V

7 CLKREQ# (NC) 8 UIM_PWR (NC)

9 GND 10 UIM_DATA (NC)

11 REFCLK- (NC) 12 UIM_CLK (NC)

13 REFCLK+ (NC) 14 UIM_RESET (1.8V Ctrl)

15 GND 16 UIM_VPP (3.3V Ctrl)

17 Reserved*(UIM_C8 NC) 18 GND

19 Reserved*(UIM_C4 NC) 20 W_DISABLE# (to uC Radio Op Disable)

21 GND 22 PERST# (to uC)

23 PERn0 (NC) 24 +3.3Vaux

25 PERp0 (NC) 26 GND

27 GND 28 +1.5V

29 GND 30 SMB_CLK (to uC I2C Slave

31 PETn0 (NC) 32 SMB_DATA (to uC I2C Slave)

33 PETp0 (NC) 34 GND

35 GND 36 USB_D- (to uC USB)

37 GND 38 USB_D+ (to uC USB)

39 +3.3Vaux 40 GND

41 +3.3Vaux 42 LED_WWAN# (NC)

43 GND 44 LED_WLAN# (NC)

45 Reserved 46 LED_WPAN# (NC)

47 Reserved 48 +1.5V

49 Reserved 50 GND

51 Reserved (route to uC) 52 +3.3Vaux

53 DMC# pull up/down 100kΩ 54 HPD (to uC)

55 AUXn (to DPRx) 56 GND

57 AUXp (to DPRx) 58 GND

59 GND 60 ML3n (NC)

61 GND 62 ML3p (NC)

63 ML2n (NC) 64 GND

65 ML2p (NC) 66 GND

67 GND 68 ML1n (to DPRx)

69 GND 70 ML1p (to DPRx)

71 ML0n (to DPRx) 72 GND

73 ML0p (to DPRx) 74 GND

75 GND 76 MLDIR (terminated to GND)

Mechanical Key

Mechanical Key

() Values in brackets refer to internal module connections