Present products impressively all around!

If an original product packaging is desired, the cardboard banderole is the right choice, because it ensures a noble product presentation and at the same time protects the packaging from pollution and damage.

Quantity single piece or moreavailable in partial quantities

Format small and large formatstailored to your requirements

Colours up to 10 colours + varnish in offset printup to 4 colours + varnish in digital printspot colours in offset print

Material solid board (different types)corrugated cardboard (all common flute types)

Quality up to 150 DPI in digital printup to 60 lpc in offset print

Adhesive technique

customized as required

Shipping express shippingindividual shipping

Printing process

As soon as your order and your data are present, we'll get to work. If we don't receive a colour proof from you, we're going to create it and send it to you on request. After your approval we'll print your packagings and send it to the distribution list you provided.

At Ellerhold, we want to provide the best possible service: you deliver your data, we take care of everything else - immediately. Our employees will be happy to advise you right from the start.

Layout Scale 1:1

Bleed + 5 mm circumferential

File format PDF/X-3 Standard (Version 1.4)

Fonts embedded / converted into paths

Safety dist. 5 mm to edge/punching outlines in the creation format

Print finishing vectorized as spot color, marked clearly

Resolution 76 to 150 DPI at 100 % positioning (digital print)240 to 300 DPI at 100 % positioning (offset print)

Colour application

max. 320 %

Colour space CMYK / spot colors (no RGB)

Data transfer by e-mail, link, or file-upload, max. 500 MB

DATA SHEET

Cardboard Banderoles

Ellerhold AGTelephone: +49 351 83933-0Sales-Dept.: karton.radebeul@ellerhold.dePrePress: prepress.radebeul@ellerhold.de

Ellerhold Zirndorf GmbHTelephone: +49 911 69987-42Sales-Dept.: karton.zirndorf@ellerhold.dePrePress: prepress.zirndorf@ellerhold.de

Ellerhold Wismar GmbHTelephone: +49 3841 7961-0Sales-Dept.: karton.wismar@ellerhold.dePrePress: prepress.wismar@ellerhold.de

Note: The product properties may not be freely combinable and may vary per production site!

https://www.ellerhold.de/verpackungen/kartonbanderolen Version: 4

PRINT DATA

https://www.ellerhold.de/verpackungen/kartonbanderolen Version: 4

Print data notes for Cardboard Banderoles

File formatPlease send us for your cardboard banderoles a PDFdocument in the format PDF/X-3 Standard (Version 1.4) andembed all fonts completely. Please make sure that theimage resolution remains unchanged and is ≥ 300dpi andthat the document is clearly named (preferably with ourorder number).

Additionally you can send us files in an open file format:Adobe InDesign, Adobe Illustrator, Adobe PhotoShop. Theimages should not be embedded in the data, but linkedfrom a separate folder. All fonts must be supplied in theirentirety.

Note: Photoshop is an image editing program. It is onlysuitable to a limited extent for creating and setting fonts,logos, etc., because the data is rasterized when savingwithout the corresponding settings. Please send all fontsand all used pictures and graphics.

Please avoid formats with lossy compression such as GIF orJPEG. These lead to undesirable results depending on theprocess.

Please also avoid the PNG format as it does not support theCMYK colour space.

LayoutPlease make sure to create the print data for yourcardboard banderoles in the correct scale. For processingreasons, we additionally require circumferential trimming bythe punching or format line. The exact values can be foundon page 1 of the respective data sheet.

Safety dist.When designing your cardboard banderoles, werecommend that you pull elements located at the edge ofthe end format or punching line into the bleed or let themend with a safety distance (see page 1 in the respective datasheet) in front of it.

Colour spacePlease create for your cardboard banderoles all data (alsoimages or other objects) in CMYK and / or spot colours.Please convert RGB data to CMYK yourself to avoidunwanted color changes. For production reasons, spotcolours are only possible in offset printing. If it is a digitalprint, these colours are simulated as well as possible. Themaximum ink application should not exceed 320 %.

Black compositionBlack and grey fonts as well as objects should only becreated in pure black (0/0/0/100) CMYK. Using black madeout of several colours is not recommended as it can easilylead to slight inaccuracies and single color flashes. In orderfor black areas to appear deep black, it is necessary to add aso-called "sub-color addition": Cyan. This only applies tolarge black areas and headlines - not to smaller font sizes!

Our recommendation is:Use black with 50% cyan and 100 % black (50/0/0/100)CMYK.

OverprintThe overprint function can be used when creating the printdata in individual cases for your cardboard banderoles toavoid possible white flashes during later printing. Whenoverprinting, however, it should be noted that the colours inoffset printing are translucent. If, for example, a blue circleis printed on an orange background, this does not result in ablue circle, but in a mixed color of green. Overprintingtherefore does not work with colored motifs, only blackobjects can overprint colored backgrounds in most cases.

White elements that are set to overprint are not visible inthe print!

With the exception of refinements, the punch outlines or thecontour cuts, you should therefore avoid the overprintfunction unless you explicitly want this effect!

TrappingOverfills/underfillings don't have to be created separately.We take care of that, individually fitting to each product.

ResolutionIn order to achieve a high-quality result, the pictures on yourcardboard banderoles must have a sufficient resolution at100 % scaling in the creation format. Please note theinformations on page 1 of the data sheet. If images with alarger scale should be integrated, the resolution must becorrespondingly higher, alas with a lower scalecorrespondingly lower. Please also ensure that theresolution is not reduced by incorrect settings whencreating PDFs.

Print finishingIf you want to refine your cardboard banderoles, you mustcreate this refinement as a special colour (spot color) in yourdata. It is important that you name the special colour with

PRINT DATA

https://www.ellerhold.de/verpackungen/kartonbanderolen Version: 4

the finishing and set it to "overprint"! Only in this way canthe finishing be applied as desired. If you don't set thespecial colour to overprint, the underlying color is omittedand a white area (paper white) is refined.

BarcodesIf barcodes are to be printed on your cardboard banderoles,please note the following: Bar codes must usually becreated according to "DIN EN 797 (ISO 15420) and CEN /ANSI-DIN EN 1635 (ISO 15416)" and reduced or enlargedaccording to the SC standard.

You need sufficient contrast to the background - ideally 100% black on a white field. Please be careful not to mix theblack with cyan, magenta or yellow. Only a pure blackguarantees an exact representation on the printed imageand readability for barcode scanners.

Please use vector data only.

Punch contour / contour cutPlease use only the latest punch outline to build the printlayout of your cardboard banderoles on a scale of 1:1. Thepunch outline should be created as a special color with thedesignation "Cutting Line" in a separate layer with theattribute "overprinting".

Data transferPlease send us your print data for your cardboardbanderoles via email. For print data over 20 MB, werecommend that you send us your print data via Dropbox,the online service www.wetransfer.com or on a physicalmedium (CD, DVD, USB stick).

Please only send us files that are required for the order inquestion. The data should be clearly structured and easy toidentify. We also need a PDF to check the position andcolour distribution or alternatively a colour proof or printsample. Please also note the maximum file size per motif of500 MB.

Print approvalBefore production starts you will receive a PDF file to viewthe complete printing plate layout of your cardboardbanderoles. Please also check this PDF for typos andspelling mistakes. Note that all colors on a monitor cannotbe displayed with color accuracy. Please give us yourapproval by replying to the email we sent you.

Once the PDF file has been approved, we'll send you a 1:1plot, if necessary, as well as a colour proof for approval forprinting. Please note that spot colors can only be simulatedin CMYK. An approval form is enclosed with the proof and

plot, which we receive back completed by fax. We alsoaccept approval e-mails, which refer specifically to proofingand plotting.

Production times without delay can only be guaranteed ifthe data is submitted in due time.

The time required for the preparation and shipping of theseapproval documents is to be ensured by the punctualsubmission of data.

We require your written approval before manufacturing anynecessary tools (embossing dies, sieves, etc.).

Without the written approval of all documents they can notbe produced!

Print data scheme for Cardboard Banderoles

PRINT DATA

The distance between texts and graphic elements to the cutting and folding edges should not be less than 5 mm.

Do not white out the punch holes!

https://www.ellerhold.de/verpackungen/kartonbanderolen Version: 4