data - sheet 1041 no. 1041/rs page. 1 of 2 40x mag...
TRANSCRIPT
DATA - SHEET 1041
No. 1041/RS Page. 1 of 2 Date. 13 / 12 / 2005
Linear Tool Ltd Tel: 020-8400-2020 Fax: 020-8400-2021 Email: [email protected]
1.5 0.512 0.5 1 1.5 20
0.5
1
1.5
2
1DIV/0.05mm
40x Magnifi cationBlue fi ltered illumination Adjustable focusGraduated Scale 4mm widePower: 2x 1.5v AA batteries (not supplied)Lamp: 2.2v / 2.5AColour: Black
CODE: 59-675-040
Specifi cation
Graduated Scale
40x Mag Min. Illuminated Microscope
BatteryCover
SideCover
Eye Piece
Focus wheel
Transparent Ring
RS: 528-5290
DATA - SHEET 1041
No. 1041/RS Page. 2 of 2 Date. 13 / 12 / 2005
Linear Tool Ltd Tel: 020-8400-2020 Fax: 020-8400-2021 Email: [email protected]
Operating Instructions
FIG. 1 FIG. 2 FIG. 3
FIG. 4
FIG. 5
Fit 2x AA batteries (see FIG. 1).Pull the 2 tubes apart for easier use.Push battery cover upwards to remove.Insert both batteries with positive connection facing bulb.Replace battery cover.
Illumination is switched on with tubes pulled apart. (FIG. 2)Illumination is switched off when tubes are pushed together (FIG.3)
Place transparent ring over part to be magnified.Pull tubes apart to switch on illumination if required.Look through Eye Piece.Adjust focus wheel to make image clear.Use Graduated Scale to measure desired part.Push tubes together when not in use.
Fitting Replacement Bulb
1. Pull illumination tube from microscope body. FIG 4.2. Remove battery cover and batteries. FIG 1.3. Pull side cover away from body. FIG 5.4. Pull out used bulb.5. Replace new bulb.6. Replace side cover.7. Replace batteries and battery cover.8. Locate side lugs of illumination tube into microscope body. Push and snap into position.
CODE: 59-675-041RS: 528-5313