dales brochure coping
TRANSCRIPT
-
8/9/2019 DALES Brochure Coping
1/4
Full design service
Standard and bespoke profiles
Low maintenance
Extensive range of colours
CI/SfB (21)
August 2006
www.dales-eaves.co.uk
his literature has been supplied in PDF format.
o arrange delivery of a full set of literature for your library, for consultation with
ales Technical Department or to arrange a meeting with your local advisor please
elephone Dales on: 0115 930 1521.
-
8/9/2019 DALES Brochure Coping
2/4
Mer id ian Cop ing Sys temDales 'Meridian Coping System' provides apractical and low maintenance finish to
parapet and perimeter walls.
The Meridian Coping System is designed to'snap' onto pre-fixed brackets providing asecure method of fixing whilst eliminatingvisible fixings.
The range includes three profile options,Standard, Weather-Struck and Ridgeway.
SizeAll profiles are available in widths of up to500mm without the need for visible fixings.Copings in excess of 500mm are designed onan individual project basis.
For assistance with a purpose made coping
please contact Dales technical department on0115 930 1521 or email your request [email protected]
Material thickness is dependant uponcoping width:up to 300mm 16g (1.6mm)301 to 410mm 14g (2mm)410 to 500mm 12g (2.5mm)
AccessoriesA wide range of standard components areavailable (see illustrations), however Dales areable to offer purpose made components to suitindividual project requirements.
FinishAll Dales aluminium products are available inan extensive range of both Syntha Pulvin Plusand Interpon D polyester powder coatingcolours.
A full list of the standard colours is availableon our web site www.dales-eaves.co.uk.To receive a curr ent colour swatch pleasecontact our Project Management Team onTel: 0115 930 1521.
Additional InformationPlease note that copings installed in excessof 10m above ground level require theintroduction of visible fixings due to increasedwind loads.
Due to loadings transferred to the structureit is vital that the top courses of masonry aretied in adequately. In addition, where unevensurfaces are to be capped, or whereperforated bricks are utilised, 25mm thickplywood must be adequately secured to thetop of the wall prior to the installation ofthe aluminium coping system.
Standard
Weather-struck
Ridgeway
Typical Installation
WALL THICKNESS + 50mm
WALL THICKNESS
75mm
75+
75mm
75mm
Dales Aluminium Coping System
-
8/9/2019 DALES Brochure Coping
3/4
90 Corner Complete with
112 Brackets
Straight Reducer Complete
with 2 Brackets
Tee Piece Complete
with 2 Brackets
Stop end Complete
with 1 Bracket
Stop end Upstand Complete
with 1 Bracket
NBS Information
NBS Plus subscribers go to www.nbsplus.co.ukand search for Dales Fabrications under'The Content' in the 'Manufacturers' dropdown menus.
Alternatively NBS information can bedownloaded at our websitewww.dales-eaves.co.ukor the followingmodel specification can be customised tosuit your project requirements.
F30 ACCESSORIES / SUNDRYITEMS FOR BRICK / BLOCK /STONE WALLING.
780 COPING SYSTEM
Manufacturer & reference:Dales Fabrications Ltd, MeridianCoping System, Crompton Road Ind Est,Ilkeston, Derbyshire DE7 4BGTel: 0115 930 1521Fax: 0115 930 7625.email: [email protected]: www.dales-eaves.co.uk
Material/Grade:Aluminium Sheet to EN 485/515/573 : DesignationNS3, Condition H14, supplied byBS EN ISO 9002 registered Stockist to ensure traceability.
Gauge / Size:150 - 300mm 1.6mm301 - 410mm 2.0mm410 - 500mm 2.5mmProfile: Standard / WeatherStruck / Ridgeway.Width:______mmColour: Polyester powder coated, colourfrom Syntha Pulvin Plus range ...coated by only Syntha Pulvin approvedand BS EN ISO 9002 registeredapplicators.Accessories:Aluminium joint straps,stopends, internal and external cornersand special items. Fixings and jointsealant recommended for the purposeand supplied by Dales Fabrications Ltd.
Method of Jointing:Joints assembled centrally over bracketsand snapped into place.
Method of Fixing:Brackets fixed with No 12 x 50mmscrews and rawl plugs into brickworkgenerally at 1500mm centres.Copings securely snapped into placeover brackets.
To discuss your project please telephone:
0115 930 1521
or e-mail us at:
For additional components please telephone: 0115 930 1521
-
8/9/2019 DALES Brochure Coping
4/4
Other products available from Dales
Fascia Soffit Systems
Dales design and manufacture a wide range offascia soffit systems that suit both traditional andcontemporary building designs. These designsoften include the integration of rainwater goodsand secondary support to provide complete, lowmaintenance eaves systems.
Details of Dales fascia soffit systems can be foundin our Fascia and Soffit Systems literature.
Solar Shading and Louvre Systems
Dales design and manufacture solar shading systemson an individual project basis. Further informationis contained in our Solar Shading Systems literature.
Rainwater Systems
Dales design and manufacture a wide range of
rainwater goods that include both standard andbespoke systems. These systems can be integratedinto our fascia soffit systems to provide a complete,low maintenance eaves system.
Details of Dales standard rainwater systems can befound in our Architectural Aluminium RainwaterSystems literature.
Nordal Rainwater SystemThe Nordal half round rainwater system is the firstlow maintenance aluminium system that iscomparable to plastic in price. It is particularly suitedto social housing projects, as it offers exceptionalvalue for money.
Further information and prices are contained in theNordal - Aluminium Rainwater System literature.
Dales Fabrications Ltd
Crompton Road Industrial Estate,Ilkeston, DerbyshireDE7 4BG
Tel: 0115 930 1521Fax: 0115 930 7625website: www.dales-eaves.co.uk
email: [email protected]