dakota bodies dakota bodiesdakota31/mt-content/uploads/2016/...flip tops with tray stainless stee l...
TRANSCRIPT
All Bodies are Available in the Following Materials :
AluminumTen Year
“No Rust-Through”Guarantee
Stationary (STD)Flip tops with Tray
Stainless steelautomotive rotarytype latch (STD)
RemovableFender Panel
Compartmentation Options:• Fully Adjustable Shelving on Uni-strut (STD)• Adjustable Hooks• Adjustable Drawers
Component Body KitH-style Streeside Sidepack
(2) Standard Fixed Tops
V-style Streetside Sidepack
Bulkhead
(2) Standard Fliptop Compartments
H-style Curbside Sidepack
V-style Curbside Sidepack
(2) Standard Curbside Fenders
Standard Bumper w/ Incandescent
Rear lighting Kit Installed
Standard Drop Down Tailgate
No Chains
Universal Frame w/Mounting Brackets
Streetside Fender OptionsDual Square Fuel Fender
Front Square Fuel Fender
Rear Square Fuel Fender
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
DAKOTA BODIES INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF Dakota Bodies Inc. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
DRAWN / JDM
DATE / 2/19/2010
Dakota Bodies Inc. / Flip Top Option
SIZE C
DRAWING # Component Body
REV: -WEIGHT: -
SCALE: 1:18SHEET 1 OF 1
Customer: Options body
Quote # -
1 Kit = 48 Configurations
Standard Features Body-Finish Powder Coated White Floor, understructure, and bumper coated with non-slip black powder coat. Gas Cylinder Style Door Holders Incandescent Rear Lighting with Wiring Harness “Crash Zone” Rear Bumper with Recess Treadbrite Aluminum Compartment Tops Automotive Stainless Steel Rotary Latches Vise Socket in Bumper Conduit in Understructure for Accessory Wire Routing Body is bolted together for Secure Attachment & Ease of Replacing Damaged Components Universal Body and Bumper Mounting Kit Automotive Bulb Type Weatherstrip Double Panel Doors with Internal Reinforcements.
Powder Coated TOUGH! ALL components are individually coated for maximum coverage
Zinc Rich Primer is used on all surfaces for unsurpassed corrosion protection
Only Highly Durable powders are used for top coating for years of protection
The deck, bumper and undercarriage are powder coated with a non-slip and impact resistant powder
DAKOTA BODIES
(1)
DAKOTA BODIES
DIMENSIONS & COMPARTMENTATION
Component Service Bodies (98”, 110”, 132”)
Cargo area wheel well boxes may be necessaryto accommodate some chassis.
201 20th Ave SE | PO Box 1655 | Watertown, SD 57201Phone: 605-882-1400 | Fax: 605-882-0828 | Toll Free: 866-227-0071
Email: [email protected]
“H” Configuration (H98 & H110):• 1st Vertical: Two adjustable shelves with two adjustable dividers per shelf• Horizontal: One removable shelf with four adjustable dividers• Rear Vertical: Open
“V” Configuration (V132):• 1st Vertical: Two adjustable shelves with two adjustable dividers per shelf• 2nd Vertical: Two adjustable shelves with two adjustable dividers per shelf• Horizontal: Open with “Pass Through” to rear vertical• Rear Vertical: One adjustable shelf with two adjustable dividers.
“H” Configuration (H132):• 1st Vertical: Two adjustable shelves with two adjustable dividers per shelf• 2nd Vertical: Two adjustable shelves with two adjustable dividers per shelf• Horizontal: One removable shelf with four adjustable dividers• Rear Vertical: Open
SW - Single WheelDW - Dual Wheel
* Doghouses are for SW only
“V” Configuration (V98 & V110):• 1st Vertical: Two adjustable shelves with two adjustable • dividers per shelf• Horizontal: Open with “Pass Through” to rear vertical• Rear Vertical: One adjustable shelf with two adjustable dividers.
“VV” - Streetside and Curbside: “V” configuration “VH” - Streetside: “V” configuration; Curbside: “H” configuration“HH” - Streetside and Curbside: “H” configuration “HV” - Streetside: “H” configuration; Curbside: “V” configuration
Flip Tops are avilable on either or both sides
Bodies available in any sidepack combination:
Dakota Bodies reserves the right to modify, change or revise any design or specification and furnish products so altered without prior notice
110”
110”
110”
28 48 34
28 48 34
26 50 28 28
26 50 28 28
110
4”
Chassis Style C.A. A B C98SW 56” 78” 49”
49”
49”
22½”
22½”22½”49”
14 ½”98DW 56” 94”
110SW 60” 78” 49” 14 ½”110DW 60” 94”132DW 84” 94”
Dakota Bodies, Inc. (Watertown, SD) has won The Work Truck Show 2011 Editors’ Choice Award for
its new component body. Impressed by the component body’s flexibility and versatility, a panel of trade
media editors and fleet managers attending the event named it the most innovative product introduced at
the Show, which was held at the Indiana Convention Center in Indianapolis, IN, March 8-10. The Editors’
Choice Award goes to a product introduced through the Work Truck Show New Product Spotlight and
New Product Media Guide programs.
Dakota Bodies Inc. Wins NTEA WorkTruck Show Editor’s Choice Award
*patent pending