daikin bms plugins for niagara ax
TRANSCRIPT
© 2015 Daikin North America, LLC
Introduction
What is in the plugins?
Plugin Components Compatibility
How to Use the Plugins
FAQ’s
Additional Documentation
Contents
© 2015 Daikin North America, LLC
Introduction
VRV control logic differs from traditional HVAC systems and may seem challenging for an integrator that is not familiar with the system. Daikin endeavors to resolve this issue by providing BMS Plugins to the integrator for easy integration. BMS Plugins are pre-programmed objects and graphics built for Niagara AX® specifically for Daikin VRV. By using the BMS Plugins, the integrators work load could be reduced to as little as point linking.
Daikin VRV BMS Plugins For Niagara AX®
Daikin Gateway
Other EquipmentPumpsLightsFans
BMS Integrator’s PC
Plugins:Programming
Graphics
BACnet/IP
© 2015 Daikin North America, LLC
Introduction
Using the iTM to connect to BMS
Building Management System
Building Management System
iTM with BACnet Client Option [Available]
iTM with BACnet server Option [Available July 2016 Est.]
A Client is a device that requests service from a ServerClient function is like a BMS. A BACnet device that can poll other devices (Server) for information or send commands. Two clients cannot communicate with each other i.e. A BMS will not be able to communicate with the BACnet Client function of the iTM. Server function is any device that responds to polls or accepts commands from a Client (BMS). A BMS can communicate with the server.
© 2015 Daikin North America, LLC
Introduction
Connecting VRV to the Building Management System
BACnet Gateway
Lonworks Gateway
Modbus Gateway
Building Management System
Daikin
Gateway Points BACnet Lonworks Modbus
Integrators
Needs to understand the VRV operation
Programming Functions• Scheduling • Monitoring• Auto Changeover• Setpoint Range
Limitation• Setback• Unoccupied Override
Graphics
© 2015 Daikin North America, LLC
Introduction
Built with the most commonly used
BMS Framework – Niagara AX®
Easy Integration of VRV system
to a BMS
Graphics provided in the form
of PX files
Simple point linking with pre-
programmed functions blocks
Modifiable Sample Stations that
controls up to 64 indoor units.
Reduced possibility of integration issues
The plugins are provided at no charge.
Features/Benefits
Current Roles
Integrators
Daikin
Needs to understand how the VRV operates
Graphics Programming
Functions• Scheduling • Monitoring• Auto Changeover• Setpoint Range
Limitation• Setback• Unoccupied
Override
Gateway Points
Roles with BMS Plugins
Linking to BMS Plugins
BMS Plugins Graphics Programming
Functions• Scheduling • Monitoring• Auto Changeover• Setpoint Range
Limitation• Setback• Unoccupied
Override Gateway Points
Integrators
Daikin
Daikin VRV BMS Plugin
© 2015 Daikin North America, LLC
Key Terminologies
Examples of some known BMS Brands that use Niagara Ax Framework:
Tridium Vykon
Siemens Talon
Honeywell Webex
Alerton
LynxSpring and Many more
Niagara Ax Framework: A JAVA based universal
software infrastructure that allows
companies to build custom Building Management Systems.
Tridium: The company that owns and licenses
the Niagara Ax Framework.
JACE: A hardware that hosts the BMS software
based on Niagara Ax Framework.
© 2015 Daikin North America, LLC
Introduction
Compatible with Niagara AX® based BMS version 3.8 and above.
The BMS Plug-ins are available at no charge and can be downloaded from Daikin City.
System Compatibility How to Acquire
The Plugins can be download from www.daikincity.com
Library Home > 08 VRV/LC Sales Partners > Sales Tools & Applications Resources >
Sales and Applications Tools> BMS Plugin Resources
Note: The integrators do not have access to Daikin City, please download and email the plugin.exe to the integrator.
© 2015 Daikin North America, LLC
What is in the Plugin?
1. Sample Stations* – Single & Dual Setpoint, the complete programming for 64 indoor units that cover both heat recovery and heat pump systems
2. Daikin VRV Palette* - function blocks that can be used in the programing of the BMS to control Daikin VRV
3. PX Files* - Graphics Template
4. Terms and conditions document
5. Sequence of operation for sample stations
11 22 33
Station Palette PX Files
44
Terms and conditions
55
Sequence of operation for the sample stations
* Niagara Ax Terminologies
© 2015 Daikin North America, LLC
Sample Station
What is a Station?
In simple terms, It is an image that consists of the Niagara components, configurations, programming and graphics required for a Niagara framework based building management system to operate in a building
Daikin Sample Station is a pre-programmed station (program) for Niagara Ax BMS. It is programmed to control up to 64 indoor units.
There are two sample stations to choose from: It is designed to work with any remote controller
(Nav/Simplified) iTM or ITC is not required. Modifiable to control both Heat Recovery
and Heat Pump system. (Default is Heat Recovery) Refer to sequence of operation before using the sample station
When using station the following functions are controlled by the BMS i.e. Auto Changeover, Setpoint Range Limitation, Schedules, Setback and Afterhours override
© 2015 Daikin North America, LLC
Daikin VRV Palette
Daikin VRV Palette
Pre-programmed function blocks that perform specific functions such as auto changeover, setback, afterhours override etc.
These function blocks can be used in the programming of the BMS to control VRV.
Currently there are 8 blocks, more blocks will be added based on requirements and feedback.
What is a Palette? It is a collection of function blocks / routines (Pieces of Programming)
© 2015 Daikin North America, LLC
PX Files
The plugins provides two templates: Dual and Single Setpoints
What is a PX File? It is XML based file that contains text and graphics information for the BMS.
© 2015 Daikin North America, LLC
Plugin Component Compatibility
Plugin Components
Project Scenarios
Sample Station (Complete programming with graphics for 64 indoor units)
The Palette(Function Blocks)
Px Files(Graphics)
The VRV is connected to a Niagara Ax BMS using the BACnet Gateway
The VRV is connected to a Niagara Ax BMS using the Lonworks or Modbus Gateway
X , May require
some changes
The sequence of operation specified is the same as the sample stations’ sequence of operation
* *
The sequence of operation specified is somewhat similar to sample stations' sequence of operation
** **
The sequence of operation specified does not match the sample stations' sequence of operation
X
A BMS that is not based on Niagara Ax Framework X X X
* There is no need to re-create the programming with palettes and PX files, as station’s programming meets the requirement. **It is easier to make changes to station rather using the palettes and px file to re-create the complete programming.
Sample Station with programming and
graphics for 64 units
Palette (function blocks) and PX file
(Graphics)
Integrator performs all programming and
graphics work
Very Minimum Effort A lot More Effort
Integrator’s Effort
Moderate Effort
Plugins not used
© 2015 Daikin North America, LLC
How to use the Plugin
Use Sample Station Use Palette
Use PX Files
The VRV is connected to a Niagara AX BMS
Start
The sequence of operation somewhat
similar or exact to that of the sample
station
YES
NO
YES
The Daikin BACnet Gateway
is used
YES
NO The Plugins are not compatible
PX Files can be usedPalette can still be used with some modifications
NO
When using Lonworks or the Modbus Gateway
If the sequence of operation for sample station is specified ‘as is’ or a similar sequence is used, only a minimum change will be required to the station.
(Complete programming with graphics for 64 indoor units)
Function Blocks
Graphics
© 2015 Daikin North America, LLC
FAQ’s
Can the Plugins be modified by an integrator?
Yes, the plugins can be modified by the integrator in field to meet the project requirement
Can the VRV connect directly to a Niagara based BMS?
No, the VRV does not connect directly to a Niagara, A Daikin BMS gateway is still required to connect the VRV to a Niagara based BMS.
Can the Graphics/PX file created for the plugins be used with iTM BACnet or any other BMS?
The PX files are only compatible for the Niagara Ax BMS and is compatible with other BMS products.
The graphics templates for the iTM are available in the form of JPG files and can be downloaded from Daikin City.
Does the plugin Auto – Update?
No, the plugins will not update by itself, A new version has to be downloaded.
© 2015 Daikin North America, LLC
Summary
The Plugin is compatible with Niagara Ax version 3.8X or later
It is available at no cost to the integrator and our reps
The Plugin is developed and maintain locally by Daikin North America
The Plugin is a package that consists of:
Sample Stations or the complete programming for 64 indoor units that cover
both heat recovery and heat pump systems.
Palette or function blocks that can be used in the programing of the BMS to
control Daikin VRV
PX Files or Graphics Template
Sample Station with programming and
graphics for 64 units
Palette (function blocks) and PX file
(Graphics)
Integrator performs all programming and
graphics work
Very Minimum Effort A lot More Effort
Integrator’s Effort
Moderate Effort
Plugins not used
© 2015 Daikin North America, LLC
Reference Documentation
Sample Station Training Webinar for the Integrator
Daikin VRV BMS Plugin User Manual for Palettes and PX file
Single Setpoint Sample Sequence Of Operation
Dual Setpoint Sample Sequence Of Operation
BACnet Design Guide
http://www.daikinac.com/content/assets/Controls/EDUS72-749B-BACnet-Design-Guide.pdf
If you have any questions contact:• Sri Swaminathan ([email protected])• Ronnie Martinez-Avila - SE ([email protected])• Dennis Osawa – NE ([email protected])• Kevin Bibler – NW ([email protected]) • Pat Sankolewicz - CE ([email protected])