da6504-1 pt dresser 12.24.2013 - dorel living...dec 24, 2013 · insert large cam bolts (4) into...

Model No: Model No: Model No: Model No:

Port Townsend Dresser Port Townsend Dresser Port Townsend Dresser Port Townsend Dresser

UPC CODE: UPC CODE: UPC CODE: UPC CODE:

Lot number:(TAKEN FROM CARTON)

_____________________________________

Date of purchase:

_______ / _______ / ______________ / _______ / ______________ / _______ / ______________ / _______ / _______

DPCI#:DPCI#:DPCI#:DPCI#:

030-09-1866

DOREL ASIADOREL ASIADOREL ASIADOREL ASIA

DA6504-1

0-65857-16509-8

DO DO DO DO NOTNOTNOTNOT RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE.If a part is missing or damaged, contact our customer service

department. We will replace the part FREEFREEFREEFREE of charge.

Tel #: 1-800-295-1980E-Mail: [email protected] #: 514-353-7819

*

*

* Use the wall safety strap provided to secure the unit to the wall.

* A Phillips head screwdriver is not included.

*

*

*

*

*

Check bolts/screws periodically and tighten them if necessary.

LIMITED WARRANTYLIMITED WARRANTYLIMITED WARRANTYLIMITED WARRANTYDorel Asia warrants its product to be free from defects in material and workmanship andagrees to remedy any such defect. This warranty covers 1 year from the date of originalpurchase. This warranty is valid only upon presentation of proof of purchase. This is solelylimited to the repair or replacement of defective furniture components and no assemblylabor is included. This warranty does not apply to any product which has been improperlyassembled, subjected to misuse or abuse or which has been altered or repaired in any way.This warranty gives you specific legal rights and you may also have other rights which varyfrom State to State.

WARNING: Should this product become damaged, and/or WARNING: Should this product become damaged, and/or WARNING: Should this product become damaged, and/or WARNING: Should this product become damaged, and/orcomponents are broken or missing, DO NOT USE.components are broken or missing, DO NOT USE.components are broken or missing, DO NOT USE.components are broken or missing, DO NOT USE.

Estimated assembly time: 60 minutes.

CARE AND CLEANINGCARE AND CLEANINGCARE AND CLEANINGCARE AND CLEANING

Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may beused occasionally to clean surface. Dry immediately. Do not use any abrasives that maydamage finish. Excessive exposure to sunlight and extreme changes in temperature andmoisture can damage wood furniture.

MAINTENANCEMAINTENANCEMAINTENANCEMAINTENANCE

DO NOTDO NOTDO NOTDO NOT use power tools.

CAUTION: Adult assembly required.

Assembly will require two people.

To avoid unnecessary damage, when levelers have been extended, DO NOTDO NOTDO NOTDO NOT drag acrosssurface when moving. Be sure to lift and carry the item to its location.

E-MAIL: [email protected]: [email protected]: [email protected]: [email protected]

NOTESNOTESNOTESNOTESEnsure all parts and components are present before beginning assembly.

Assemble on a soft, smooth surface to prevent damage to the product finish.

Montreal, QuebecMontreal, QuebecMontreal, QuebecMontreal, Quebec

Canada H1G 3L1Canada H1G 3L1Canada H1G 3L1Canada H1G 3L1

CUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact our customerservice representative first!

CALL 1-800-295-1980CALL 1-800-295-1980CALL 1-800-295-1980CALL 1-800-295-1980

You can also order parts by writing to the address listed below. Please include the productmodel number, color and a detailed description of the part.

Customer Service Department No. 413Customer Service Department No. 413Customer Service Department No. 413Customer Service Department No. 413

12345 Albert-Hudon Boulevard, Suite 10012345 Albert-Hudon Boulevard, Suite 10012345 Albert-Hudon Boulevard, Suite 10012345 Albert-Hudon Boulevard, Suite 100

HARDWARE LISTHARDWARE LISTHARDWARE LISTHARDWARE LIST

1111 2222 3333 4444

5555 6666 7777 8888

9999 10101010 11111111 12121212

LARGE WOOD DOWEL

42 PCS

Ø5 X 28mm

SMALL CAM LOCK SMALL CAM BOLT

SMALL WOOD DOWEL

22 PCS

HANDLE SHORT BOLT

7 PCS

LARGE CAM BOLT

37 PCS

Ø5/32" x 1/2"

LARGE CAM LOCK

37 PCS

14 PCS

Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend Dresser

DA6504-1DA6504-1DA6504-1DA6504-1

Ø8 X 30mm Ø6 X 20mm Ø7 X 35mm

1 PC

ROUND HEAD SCREW FLAT HEAD SCREW BOLT ALLEN KEY

36 PCS 28 PCS 6 PCS

Ø5/8" x 1-1/4"Ø4mm x 1"

28 PCS 28 PCS

Ø3 X 15mm

PARTS LISTPARTS LISTPARTS LISTPARTS LISTAAAA BBBB CCCC DDDD EEEE

FFFF GGGG HHHH IIII JJJJ

KKKK LLLL MMMM NNNN OOOO

PPPP QQQQ RRRR SSSS TTTT

UUUU VVVV WWWW

2 PCS

SUPPORT PANELBACK LOWER RAIL

1 PC

4 PCS 4 PCS

LARGE DRAWER BACK

1 PC 1 PC

LOWER STAND PANEL FRONT TOP RAIL

LARGE RIGHT DRAWER SIDE

1 PC1 PC

SMALL RIGHT DRAWER SIDE SMALL DRAWER BACK SMALL DRAWER BOTTOM

3 PCS 3 PCS

4 PCS

2 PCS

LARGE DRAWER BOTTOM

3 PCS

3 PCS

4 PCS

SMALL FRONT DRAWER PANEL SMALL LEFT DRAWER SIDE

3 PCS

Port Townsend DresserPort Townsend DresserPort Townsend DresserPort Townsend DresserDA6504-1DA6504-1DA6504-1DA6504-1

UPPER STAND PANEL

2 PCS

RIGHT SIDE PANEL FIXED SHELF

1 PC

TOP PANEL LEFT SIDE PANEL

1 PC

BACK TOP RAIL FRONT MIDDLE RAIL

LARGE LEFT DRAWER SIDE

4 PCS

BACK PANEL LARGE FRONT DRAWER PANEL

FRONT LOWER RAIL

1 PC1 PC 2 PCS

STEP 1:STEP 1:STEP 1:STEP 1:

1 4 PCS

4 2 PCS

11 4 PCS

Insert large wood dowels (1) and large cam bolts (4) into fixed shelf (D).Attach upper stand panels (E) to fixed shelf (D) with bolts (11).Use Allen key (12) to tighten bolts (11).


DA6504-1DA6504-1DA6504-1DA6504-1


3 3 PCS

4 3 PCS


DA6504-1DA6504-1DA6504-1DA6504-1

Insert large cam bolts (4) into back lower rails (K) and front lower rail (J).Insert large cam locks (3) into lower stand panel (F).Attach the rails (K & L) to lower stand panel (F) as shown below and secure by rotatinglarge cam locks (3) 1/2-turn clockwise using a Phillips head screwdriver (not included).


1 2 PCS

3 2 PCS

4 2 PCS


DA6504-1DA6504-1DA6504-1DA6504-1

Insert large wood dowels (1) and large cam locks (3) into front middle rails (I).Insert large cam bolts (4) into lower stand panel (F) as shown.Secure the front middle rails (I) to lower stand panel (F) by rotating large cam locks (3)1/2-turn clockwise using a Phillips head screwdriver (not included).


1 2 PCS

3 2 PCS


DA6504-1DA6504-1DA6504-1DA6504-1

Insert large wood dowels (1) into fixed shelf (D).Insert large cam locks (3) into lower stand panel (F).Attach fixed shelf (D) to lower stand panel (F) and secure by rotating large cam locks (3)1/2-turn clockwise using a Phillips head screwdriver (not included).


4 16 PCS


DA6504-1DA6504-1DA6504-1DA6504-1

Insert large cam bolts (4) into left side panel (B) and right side panel (C).


1 9 PCS

3 6 PCS


DA6504-1DA6504-1DA6504-1DA6504-1

Insert large wood dowels (1) into left side panel (B).Insert large cam locks (3) into rails (I, J, K) and fixed shelf (D) as shown.Attach the assembled frame as shown to left side panel (B) by rotating large cam locks (3)1/2-turn clockwise using a Phillips head screwdriver (not included).


1 4 PCS

3 2 PCS


DA6504-1DA6504-1DA6504-1DA6504-1

Insert large wood dowels (1) into left side panel (B).Insert large cam locks (3) into back top rail (H) and front top rail (G).Attach back top rail (H) and front top rail (G) to left side panel (B) by rotating large camlocks (3) 1/2-turn clockwise using a Phillips head screwdriver (not included).


1 13 PCS

3 8 PCS


DA6504-1DA6504-1DA6504-1DA6504-1

Insert large wood dowels (1) and large cam locks (3) into rails (G, H, I, J & K) and fixed shelf(D).Secure the right side panel (C) to the assembled unit by rotating large cam locks (3) 1/2-turn clockwise using a Phillips head screwdriver (not included).


1 8 PCS 4 14 PCS

3 14 PCS 11 2 PCS


DA6504-1DA6504-1DA6504-1DA6504-1

Insert large cam bolts (4) into top panel (A) as shown.Insert large wood dowels (1) into left side panel (B), upper stand panels (E) and right side panel(C).Insert large cam locks (3) into side panels (B & C), upper stand panels (E), back top rail (H) andfront top rail (G).Fasten top panel (A) to the assembled unit by rotating large cam locks (3) 1/2-turn clockwiseusing a Phillips head screwdriver (not included).Attach support panel (L) to lower stand panel (F) with bolts (11). Use Allen key (12) to tightenthe bolts.


9 36 PCS


DA6504-1DA6504-1DA6504-1DA6504-1

Attach back panels (M) to the assembled unit with round head screws (9).Use a Phillips head screwdriver (not included) to tighten the screws.


10 16 PCS 2 16 PCS

8 8 PCS 5 16 PCS

6 16 PCS


DA6504-1DA6504-1DA6504-1DA6504-1

Insert small cam bolts (6) and small wood dowels (2) into large front drawer panel (N).Insert small cam locks (5) into large left drawer side (O) and large right drawer side (P).Attach large drawer sides (O & P) to large front drawer panel (N).Secure the drawer sides by rotating small cam locks (5) 1/2-turn clockwise.Slide the large drawer bottom (R) into the grooves of large drawer sides (O & P) and large front drawer panel(N).Attach large drawer back (Q) to large drawer sides (O & P) with flat head screws (10).Use a Phillips head screwdriver (not included) to tighten screws.Attach handle (7) to small front drawer panel (S) with short bolts (8) and a Phillips head screwdriver (notincluded).Repeat this step to assemble the other large drawers.

4 PCS7


10 12 PCS 2 12 PCS

8 6 PCS 5 12 PCS

6 12 PCS


DA6504-1DA6504-1DA6504-1DA6504-1

Insert small cam bolts (6) and small wood dowels (2) into small front drawer panel (S).Insert small cam locks (5) into small left drawer side (T) and small right drawer side (U).Attach small drawer sides (T & U) to small front drawer panel (S) and secure by rotating small cam locks (5) 1/2-turnclockwise.Slide the small drawer bottom (W) into the grooves of small drawer sides (T & U) and small front drawer panel (S).Attach small drawer back (V) to small drawer sides (T & U) with flat head screws (10) and a Phillips head screwdriver(not included).Attach handle (7) to small front drawer panel (S) with short bolts (8) and a Phillips head screwdriver (not included).Repeat this step to assemble the other small drawers.

7 3 PCS



DA6504-1DA6504-1DA6504-1DA6504-1

Insert all drawers into the assembled unit.

That's it! You've finished assembling your Dresser!

Dorel Asia is an authorized licensee of Eddie Bauer Licensing Services LLC. Eddie Bauer® and the Eddie Bauerlogos are the registered trademarks of Eddie Bauer Licensing Services LLC.

CAUTIONCAUTIONCAUTIONCAUTION: "This unit is intended for use only with theproducts and/or maximum weights indicated. Use with otherproducts and/or products heavier than the maximum weightsindicated may result in instability or cause possible injury."


DA6504-1DA6504-1DA6504-1DA6504-1

Themaximumweight is30lbs

DO DO DO DO NOTNOTNOTNOT RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE. RETURN PRODUCT TO THE STORE.If a part is missing or damaged, contact our customer service

department. We will replace the part FREEFREEFREEFREE of charge.

Tel #: 1-800-295-1980E-Mail: [email protected] #: 514-353-7819

Maximumweight perdrawer 15lbs

Furniture Wall Safety StrapFurniture Wall Safety StrapFurniture Wall Safety StrapFurniture Wall Safety Strap1 2 3 4 5

TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED. TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED. TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED. TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.

NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED. NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED. NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED. NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASEFUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASEFUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASEFUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE

CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.

Step 7:Step 7:Step 7:Step 7:



Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).Attach two mounting brackets (3) securely to the back edge of the furniture. Use the short screws (4).

Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3),Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3),Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3),Determine where furniture is to be placed and mark location on the wall for the mounting brackets (3),screw holes approximately 2" below the brackets mounted to the edge of the furniture.screw holes approximately 2" below the brackets mounted to the edge of the furniture.screw holes approximately 2" below the brackets mounted to the edge of the furniture.screw holes approximately 2" below the brackets mounted to the edge of the furniture.



SAFETY WALL STRAP2 PCS

WALL ANCHOR2 PCS

MOUNTING BRACKET4 PCS

SHORT SCREW2 PCS

LONG SCREW2 PCS

WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITUREWARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITUREWARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITUREWARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITUREMAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHINDMAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHINDMAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHINDMAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHINDTHE FURNITURE TO ENSURE SAFETY.THE FURNITURE TO ENSURE SAFETY.THE FURNITURE TO ENSURE SAFETY.THE FURNITURE TO ENSURE SAFETY.

TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY REMOVE THETO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY REMOVE THETO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY REMOVE THETO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY REMOVE THELONG SCREW (5) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.LONG SCREW (5) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.LONG SCREW (5) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.LONG SCREW (5) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.

Check to make sure the straps (1) is securely laced and locked to the brackets (3).Check to make sure the straps (1) is securely laced and locked to the brackets (3).Check to make sure the straps (1) is securely laced and locked to the brackets (3).Check to make sure the straps (1) is securely laced and locked to the brackets (3).

Drill two 3/8" holes in the wall. Press the wall anchors (2) into the holes and gently tap until the flangeDrill two 3/8" holes in the wall. Press the wall anchors (2) into the holes and gently tap until the flangeDrill two 3/8" holes in the wall. Press the wall anchors (2) into the holes and gently tap until the flangeDrill two 3/8" holes in the wall. Press the wall anchors (2) into the holes and gently tap until the flangeon the anchors is against the wall surface.on the anchors is against the wall surface.on the anchors is against the wall surface.on the anchors is against the wall surface.

Position the brackets (3) over the anchors (2) and use the long screws (5) to securely, attach thePosition the brackets (3) over the anchors (2) and use the long screws (5) to securely, attach thePosition the brackets (3) over the anchors (2) and use the long screws (5) to securely, attach thePosition the brackets (3) over the anchors (2) and use the long screws (5) to securely, attach thebrackets (3) to the wall.brackets (3) to the wall.brackets (3) to the wall.brackets (3) to the wall.

Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.Place the furniture so the brackets (3) on the back edge is in line with the brackets (3) on the wall.

Lace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together andLace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together andLace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together andLace an end of the safety wall straps (1) down through each bracket (3). Bring both ends together andslide the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pullslide the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pullslide the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pullslide the beaded end of the straps (1) through the keyholes shaped slot in the other end until snug. Pulldown on the beaded end until it snap locks into the keyhole slot.down on the beaded end until it snap locks into the keyhole slot.down on the beaded end until it snap locks into the keyhole slot.down on the beaded end until it snap locks into the keyhole slot.

To double lock return the beaded end back through the keyholes as shown.To double lock return the beaded end back through the keyholes as shown.To double lock return the beaded end back through the keyholes as shown.To double lock return the beaded end back through the keyholes as shown.




MODEL #: DA6504-1MODEL #: DA6504-1MODEL #: DA6504-1MODEL #: DA6504-1

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE

PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING

NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).

Customer Service Fax Number 514-353-7819

Request Date:

Name:

Shipping Address:

Street & Number:

City & State:

Zip Code:

Day Time Phone Number:

(including area code)

Date & Place of Purchase:

Part(s) description and quantity (Please be sure to list model number or SKN number):

Customer ServiceCustomer ServiceCustomer ServiceCustomer Service

Customer Service Representative Mailing Address:

Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1

Email: [email protected] Service Phone Number 1-800-295-1980

da6504-1 pt dresser 12.24.2013 - dorel living...dec 24, 2013 · insert large cam bolts (4) into...

Documents