d3 adjustable, square spec sheets/d3-adsq...1 downlight is wet location rated when trim is installed...
TRANSCRIPT
Designed in Austin, TX 512-347-1100 | ketra.com © 2019 Ketra, Inc. All rights reserved
770-000028-04 r12Specifications are subject to change without notice
Bevel
Flanged Mud-in
Pinhole
Bevel
Pinhole
D3 ADJUSTABLE, SQUARE
Tunable, fixture produces a wide range of 90+ CRI/R9 whites from 1400K-10,000K, as well as pastels and saturated colors
Closed-loop color point maintenance to <1 MacAdam ellipse over lifetime and temperature
Integrated temperature protection maintains safe operating conditions
Wirelessly dimmable to 0.1%
On-board wireless control enables individual addressability and control
1 Downlight is wet location rated when trim is installed with lens.
2 Either an optic accessory or a trim accessory may be used at a time. They cannot be used simultaneously.
HARDWARE ORDERING GUIDE
HOUSING
Product Line Fixture & Trim
BT NCIC SP
Wattage Platform & Control
Beam Angle Voltage & Region
Housing Type
Optic Accessory
Shipping Option
Code
Product Line
Commercial CM-
Residential (Homeworks compatible) HW-
Fixture & Trim
D3 Adjustable, Square * D3ADSQ
D3 Adjustable, Square Mud-in ** D3ADSM
Wattage
9 Watts 09
13 Watts 13
18 Watts 18
Platform & Control
Wide Gamut, Tunable BT
Beam Angle
Spot (15°) Low Glare 15L
Flood (25°) Low Glare 25L
Wide Flood (40°) Low Glare 40L
Very Wide Flood (60°) Low Glare 60L
Spot (15°) High Output 15H
Flood (25°) High Output 25H
Wide Flood (40°) High Output 40H
Very Wide Flood (60°) High Output 60H
Code
Voltage & Region
120VAC 60Hz, North America 11
277VAC 60 Hz, North America 12
Housing Type
New Construction, IC/Airtight NCIC
Optic Accessory2 (See diagram on page 3)
None N
Solite S
Frost Lens F
Hex Louver H
Shipping Option
Single Pack (Default, ships with Butterfly Brackets & 24” Nailer Bars to be installed in field)
SP
Project:
Comments:
Prepared By:
Type:
Order Code:
Model Trim Color Trim
UN-
Product Line
Code
Product Line
Universal UN-
Model
Flanged Trim *Not compatible with flangeless housing
D3 Square Adjustable Bevel D3TFSQ1
D3 Square Adjustable Pinhole D3TFSPA
Flangeless Trim **Not compatible with flanged housing
D3 Square Adjustable Flangeless Bevel D3TXSQ1
D3 Square Adjustable Flangeless Pinhole D3TXSPA
Trim Color
White WH
Black BK
Trim Accessory1 2 (See diagram on page 3)
None N
Solite Lens S
Frost Lens F
TRIM
Accessory
Order Code:
Designed in Austin, TX 512-347-1100 | ketra.com © 2019 Ketra, Inc. All rights reserved
770-000028-04 r12Specifications are subject to change without notice
D3 ADJUSTABLE, SQUARE
SPECIFICATIONS1
OPTICAL & ELECTRICAL PERFORMANCE
Delivered Lumen Output2
Beam Angle (1'' recess)
9W 13W 18W Pinhole lm multiplier
15° beam, low glare 650lm 882lm 1092lm 0.57
25° beam, low glare 623lm 845lm 1046lm 0.48
40° beam, low glare 569lm 772lm 955lm 0.61
60° beam, low glare 561lm 760lm 941lm 0.60
15° beam, high output 682lm 928lm 1148lm 0.62
25° beam, high output 678lm 923lm 1142lm 0.48
40° beam, high output 646lm 878lm 1087lm 0.54
60° beam, high output 630lm 857lm 1061lm 0.55
CRI (Ra) >90 (R9>90)
Lumen Maintenance3 50,000 hours to L70 @ 25˚C TA
Color Spatial Uniformity <2 MacAdam ellipses across field angle
Color Point Range4 1400˚K–10,000˚K, Fully Saturated,& Pastel
Equivalent Traditional Lamp 75W halogen
Dimming Range4 0.1–100%lm
Power consumptionD3.09 9W D3.13 13W D3.18 18W
Voltage 120VAC 60Hz277VAC 60Hz
Power Factor >0.9
Inrush Current5 800mA, 0.2 mS duration
Delivered Efficacy
Beam Angle (1'' recess) 9W 13W 18W
15° beam, low glare 72lm/W 68lm/W 61lm/W
25° beam, low glare 69lm/W 65lm/W 58lm/W
40° beam, low glare 63lm/W 59lm/W 53lm/W
60° beam, low glare 62lm/W 58lm/W 52lm/W
15° beam, high output 76lm/W 71lm/W 63lm/W
25° beam, high output 75lm/W 71lm/W 62lm/W
40° beam, high output 72lm/W 68lm/W 59lm/W
60° beam, high output 70lm/W 66lm/W 58lm/W
Surge Protection 2.5KV
Control Protocol KetraNet Mesh
ENVIRONMENTAL
Operating Temperature (TA) 0 - 40°C
Storage Temperature -20 - 80°C
Humidity 0 - 95%, Non-condensing
Certification UL, cUL, 120V: FCC Class B, 277V: FCC Class A
LocationUL Damp Location, UL Wet Location Available with Trim Lens
MECHANICAL
Mounting Options Hanger Bars/ Butterfly Brackets
Field Replaceable Optics Yes
Field Replaceable Light Engine Yes
Field Replaceable Power Supply Yes
Additional Optic Lens 2.5" Lens, 1/8" Thick
Additional Trim Lens 2.75" Lens, 1/8" Thick
Housing Material Powder Coated Steel, Polymer
Lens Material Glass
DIMENSIONS
Ceiling Square Cut-out 4" Flanged; 5.5" Mud-in
Trim Outside Dimension 4.63" Flanged; 3.75" Mud-in
Trim Inside Dimension Flanged: 2.84" Bevel1.77" Pinhole
Mud-in: 2.76" Bevel1.77" Pinhole
Optics Outside Dimension 2.5"
Trim Depth 1"
Ceiling Thickness 0.625" – 1.5"
Emitter Vertical Adjustment (tool-free) 0.75"
Housing Vertical Adjustment via Butterfly Bracket 1.75"
Adjustability Tilt to 40˚364˚ Rotation
Housing Height 3.50"
Housing Length 18.38"
Housing Width 10"
Unit Weight 7.75 lb
1 All performance measurements taken with 1” trim, with light engine at nadir at the low regress position, at 3000K, 25°C ambient, 100% power input, unless otherwise stated.
2 Lumen measurement complies with IES LM-79-08 testing procedures.
3 Lumen maintenance values calculated in accordance to TM-21 procedures based on LM-80 compliant measurement data.
4 Intensity and color point controlled via Ketra’s wireless network.
5 For more information on inrush current, refer to Ketra's Inrush App Note in the Support section of our website.
* For Title 24 and Title 20 compliant model numbers or for more information, please contact Customer Service at [email protected] or 512.872.4349.
Designed in Austin, TX 512-347-1100 | ketra.com © 2019 Ketra, Inc. All rights reserved
770-000028-04 r12Specifications are subject to change without notice
D3 ADJUSTABLE, SQUARE
LENS ACCESSORY PLACEMENT
Low Regress + Optic Accessory Only = OK!
Low Regress + Trim Lens Only = OK!(Wet Location Rated)
OR
LOWREGRESS
OPTICACCESSORY
TRIM LENS
EMITTER
HEAT SINK
OPTIC HOUSING
CEILING
TRIM
Note: Downlight is wet location rated when trim is installed with lens.Note: Only one optional optical or trim accessory can be used at a time.
COMPONENT ORDERING GUIDE
REPLACEMENT OPTICS
UN-D3 OP
Product Line/Series
Accessory Type
Beam Angle
ACCESSORIES MOUNTING KITS
UN-D3
Product Line/Series
Accessory
UN-D3 MA
Product Line/Series
Accessory Type
Mounting Accessory
Code
Product Line & Series
Universal Part - Recessed Downlight D3
Accessory Type
Optic OP
Beam Angle
Spot (15°) Low Glare 15L
Flood (25°) Low Glare 25L
Wide Flood (40°) Low Glare 40L
Very Wide Flood (60°) Low Glare 60L
Spot (15°) High Output 15H
Flood (25°) High Output 25H
Wide Flood (40°) High Output 40H
Very Wide Flood (60°) High Output 60H
Code
Product Line & Series
Universal Part - Recessed Downlight D3
Accessory
Trim Lens, Square Bevel, SoliteFlanged Trims Only
TLSQFS
Trim Lens, Square Bevel, FrostFlanged Trims Only
TLSQFF
Trim Lens, Square Mud-in, SoliteMud-in Trims Only
TLSQXS
Trim Lens, Square Mud-in, FrostMud-in Trims Only
TLSQXF
Trim Lens, Pinhole, Solite TLPINSTrim Lens, Pinhole, Frost TLPINFOptic Accessory Solite OASOptic Accessory Frost OAFOptic Accessory Hex Louver OAH
Code
Product Line & Series
Universal Part - Recessed Downlight D3
Accessory Type
Mounting Accessory MA
Mounting Accessory
(2) Butterfly Brackets B
(2) 24” (60.9cm) Nailer Bar N
Order Code: Order Code: Order Code:
SQUARE BOX ROUND BOX
HOUSING FOR FLANGED TRIMS
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: PDD
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
1 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
SQUARE BOX ROUND BOX
HOUSING FOR FLANGED TRIMS
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: PDD
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
1 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
4.05"[103.0mm]
0.89" [22.5mm]ALL KNOCKOUTS
3.09"[78.5mm]
10.07"[256.0mm]
0.63"[16.0mm]
6.37"[162.0mm]
18.38"[467.0mm]
3.50"[89.0mm]
2 INCH
1 INCH
SQUARE PROFILE TRIMS
PINHOLE FLANGEDWALL WASH FLANGED FLANGED
2 INCH
1 INCH
ADJUSTABLE
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: 6
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
7 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
2 INCH
1 INCH
SQUARE PROFILE TRIMS
PINHOLE FLANGEDWALL WASH FLANGED FLANGED
2 INCH
1 INCH
ADJUSTABLE
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: 6
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
7 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
2 INCH
1 INCH
SQUARE PROFILE TRIMS
PINHOLE FLANGEDWALL WASH FLANGED FLANGED
2 INCH
1 INCH
ADJUSTABLE
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: 6
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
7 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
2 INCH
1 INCH
SQUARE PROFILE TRIMS
PINHOLE FLANGEDWALL WASH FLANGED FLANGED
2 INCH
1 INCH
ADJUSTABLE
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: 6
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
7 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
1.08"[27.5mm]
1.48"[37.6mm]
4.63"[117.5mm]
4.63"[117.5mm]
4.63"[117.5 mm]
2.84"[72.1mm]
4.63"[117.5 mm]
1.77"[45.0mm]
Ceiling Square Cut-out 4" [101.6 mm]
Ceiling Square Cut-out 4" [101.6 mm]
Designed in Austin, TX 512-347-1100 | ketra.com © 2019 Ketra, Inc. All rights reserved
770-000028-04 r12Specifications are subject to change without notice
D3 ADJUSTABLE, SQUARE
DIMENSION DRAWINGS
FLANGED HOUSING
FLANGED BEVEL TRIM FLANGED ADJUSTABLE PINHOLE TRIM
Designed in Austin, TX 512-347-1100 | ketra.com © 2019 Ketra, Inc. All rights reserved
770-000028-04 r12Specifications are subject to change without notice
D3 ADJUSTABLE, SQUARE
MUD-IN BEVEL TRIM MUD-IN ADJUSTABLE PINHOLE TRIM
DIMENSION DRAWINGS
MUD-IN HOUSING
HOUSING FOR MUD IN TRIMS
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: PDD
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
2 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
HOUSING FOR MUD IN TRIMS
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: PDD
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
2 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
5.42"[137.5mm]
0.03" [1.0mm]ALL KNOCKOUTS
3.09"[78.5mm]
10.07"[256.0mm]
0.61"[15.5mm]
6.37"[162.0mm]
18.38"[467.0mm]
5.42"[137.5mm]
3.50" [87.5mm]
1 INCH
2 INCH
7.79" [197.9mm]
1.14" [28.9mm]
1 INCH
PINHOLE FLANGELESS
2 INCH
SQUARE MUD IN
3.55" [90.3mm]
ADJUSTABLE
FLANGELESSWALL WASH FLANGELESS
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: PDD
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
5 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
7.79"[197.9mm]
1.14"[28.9mm]
3.55"[90.2mm]
MUD-IN TRIM RETAINER
1 INCH
2 INCH
7.79" [197.9mm]
1.14" [28.9mm]
1 INCH
PINHOLE FLANGELESS
2 INCH
SQUARE MUD IN
3.55" [90.3mm]
ADJUSTABLE
FLANGELESSWALL WASH FLANGELESS
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: PDD
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
5 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
1 INCH
2 INCH
7.79" [197.9mm]
1.14" [28.9mm]
1 INCH
PINHOLE FLANGELESS
2 INCH
SQUARE MUD IN
3.55" [90.3mm]
ADJUSTABLE
FLANGELESSWALL WASH FLANGELESS
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: PDD
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
5 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
1.08"[27.8 mm]
2.76" [70.0mm]
3.75"[95.3 mm]
3.75"[95.4mm]
Ceiling Hole Diameter 5.5" [101.6 mm]
1 INCH
2 INCH
7.79" [197.9mm]
1.14" [28.9mm]
1 INCH
PINHOLE FLANGELESS
2 INCH
SQUARE MUD IN
3.55" [90.3mm]
ADJUSTABLE
FLANGELESSWALL WASH FLANGELESS
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: PDD
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
5 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
1 INCH
2 INCH
7.79" [197.9mm]
1.14" [28.9mm]
1 INCH
PINHOLE FLANGELESS
2 INCH
SQUARE MUD IN
3.55" [90.3mm]
ADJUSTABLE
FLANGELESSWALL WASH FLANGELESS
3815 S. CAPITAL OF TEXAS HWYSUITE 100
AUSTIN, TX 78704P: 512.872.4349
DRAWN BY:
DATE:
SHEET NAME
SHEET
SCALE:
CHECKED BY:
OF
FOR REFERENCE ONLYNOT FOR
CONSTRUCTION
DRAWING #:
REVISION #:
DRAWING TYPE: PDD
01
11/07/2016
SC, CEH
GEB
NTS
D3 - PRODUCTDOCUMENT DRAWING
5 8THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF
KETRA, INC. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
PROPRIETARY
1.48"[37.6 mm]
1.77" [45mm]
3.75"[95.3 mm]
3.75"[95.3 mm]
Ceiling Hole Diameter 5.5" [101.6 mm]
Designed in Austin, TX 512-347-1100 | ketra.com © 2019 Ketra, Inc. All rights reserved
770-000028-04 r12Specifications are subject to change without notice
D3 ADJUSTABLE, SQUARE
Beam Dia.
Distance From Light
Foot-candles
3.69’47
3.16’64
2.63’93
2.11’145
14’
12’
10’
8’
1.58’258 6’
0.9’
1.8’
2.7’
3.6’
4.5’
20°
46382320 6959 9279
40°
60°
80°
0
790
197
88
49
32
Foot-candles
Beam Dia.Distance from Light
10’
8’
6’
4’
2’
Beam Dia.
Distance From Light
Foot-candles
6.21’21
5.32’29
4.43’42
3.55’66
14’
12’
10’
8’
2.66’117 6’
Beam Dia.
Distance From Light
Foot-candles
6.21’22
5.32’30
4.43’43
3.55’67
14’
12’
10’
8’
2.66’119 6’
ISO FOOTCANDLE CHARTS: 2700 - 5000K VALUES ONLY, DELIVERED LUMENSLM-79 compliant IES files available upon request.
BEAM ANGLE: 15° SPOT, LOW GLARE
Product Code1 Wattage Delivered Lumens CBCP
D3ADSQ18BT15L 18W 1092 7603
0.9’
1.8’
2.7’
3.6’
4.5’
20°
21491074 3228 4297
40°
60°
80°
0
790
197
88
49
32
Foot-candles
Beam Dia.Distance from Light
10’
8’
6’
4’
2’0.9’
1.8’
2.7’
3.6’
4.5’
20°
20891050 3149 4198
40°
60°
80°
0
790
197
88
49
32
Foot-candles
Beam Dia.Distance from Light
10’
8’
6’
4’
2’
0.9’
1.8’
2.7’
3.6’
4.5’
20°
38011901 5702 7603
40°
60°
80°
0
790
197
88
49
32
Foot-candles
Beam Dia.Distance from Light
10’
8’
6’
4’
2’
Beam Dia.
Distance From Light
Foot-candles
3.69’39
3.16’53
2.63’76
2.11’119
14’
12’
10’
8’
1.58’211 6’
BEAM ANGLE: 15° SPOT, HIGH OUTPUT
Product Code1 Wattage Delivered Lumens CBCP
D3ADSQ18BT15H 18W 1148 9279
BEAM ANGLE: 25° SPOT, HIGH OUTPUT
Product Code1 Wattage Delivered Lumens CBCP
D3ADSQ18BT25H 18W 1142 4297
BEAM ANGLE: 25° SPOT, LOW GLARE
Product Code1 Wattage DeliveredLumens CBCP
D3ADSQ18BT25L 18W 1046 4198
1 All performance measurements taken with 1” trim, with light engine at nadir at the low regress position, at 3000K, 25°C ambient, 100% power input, unless otherwise stated.
Designed in Austin, TX 512-347-1100 | ketra.com © 2019 Ketra, Inc. All rights reserved
770-000028-04 r12Specifications are subject to change without notice
D3 ADJUSTABLE, SQUARE
Beam Dia.
Distance From Light
Foot-candles
16.17’6
13.86’9
11.55’12
9.24’19
14’
12’
10’
8’
6.93’34 6’
Beam Dia.
Distance From Light
Foot-candles
10.19’11
8.74’15
7.28’22
5.82’34
14’
12’
10’
8’
4.37’60 6’
Beam Dia.
Distance From Light
Foot-candles
16.17’6
13.86’9
11.55’13
9.24’20
14’
12’
10’
8’
6.93’35 6’
Beam Dia.
Distance From Light
Foot-candles
10.19’10
8.74’14
7.28’20
5.82’32
14’
12’
10’
8’
4.37’57 6’
BEAM ANGLE: 40° WIDE FLOOD, LOW GLARE
Product Code1 Wattage Delivered Lumens CBCP
D3ADSQ18BT40L 18W 955 2041
BEAM ANGLE: 60˚ VERY WIDE FLOOD, HIGH OUTPUT
Product Code1 Wattage Delivered Lumens CBCP
D3ADSQ18BT60H 18W 1061 1257
BEAM ANGLE: 40° WIDE FLOOD, HIGH OUTPUT
Product Code1 Wattage Delivered Lumens CBCP
D3ADSQ18BT40H 18W 1087 2170
BEAM ANGLE: 60˚ VERY WIDE FLOOD, LOW GLARE
Product Code1 Wattage Delivered Lumens CBCP
D3ADSQ18BT60L 18W 941 1235
0.9’
1.8’
2.7’
3.6’
4.5’
20°
1085543 1628 2170
40°
60°
80°
0
790
197
88
49
32
Foot-candles
Beam Dia.Distance from Light
10’
8’
6’
4’
2’
0.9’
1.8’
2.7’
3.6’
4.5’
20°
628314 943 1257
40°
60°
80°
0
790
197
88
49
32
Foot-candles
Beam Dia.Distance from Light
10’
8’
6’
4’
2’0.9’
1.8’
2.7’
3.6’
4.5’
20°
617309 926 1235
40°
60°
80°
0
790
197
88
49
32
Foot-candles
Beam Dia.Distance from Light
10’
8’
6’
4’
2’
0.9’
1.8’
2.7’
3.6’
4.5’
20°
1021510 1531 2041
40°
60°
80°
0
790
197
88
49
32
Foot-candles
Beam Dia.Distance from Light
10’
8’
6’
4’
2’
ISO FOOTCANDLE CHARTS: 2700 - 5000K VALUES ONLY, DELIVERED LUMENSLM-79 compliant IES files available upon request.
1 All performance measurements taken with 1” trim, with light engine at nadir at the low regress position, at 3000K, 25°C ambient, 100% power input, unless otherwise stated.
Designed in Austin, TX 512-347-1100 | ketra.com © 2019 Ketra, Inc. All rights reserved
770-000028-04 r12Specifications are subject to change without notice
D3 ADJUSTABLE, SQUARE
GENERAL SPECIFICATIONS
LED downlight shall employ closed loop optical and thermal feedback capable of maintaining color point accuracy of <1 MacAdam ellipse.
LED downlight shall have color spatial uniformity of <2 MacAdam ellipses over full field angle.
LED downlight shall have an integrated wireless control onboard.
LED downlight shall be capable of a CRI >90 along the Black Body Curve from 2700-5000K.
LED downlight lamp shall be a single source multi-die emitter consisting of both monochromatic and phosphor converted blue LED dye.
LED downlight shall be sealed, meeting UL damp location (and UL Wet Location with Wet Location Trim) requirements.
LED downlight shall be dimmable to 0.1% of measured luminous flux with wireless dimming.
LED downlight shall be UL listed and RoHS compliant.
LED downlight shall be capable of in situ firmware and software upgrades.
Ketra LED Fixtures are warrantied to be free from material defects in material and workmanship for five (5) years or 25,000 hours from date of shipment, whichever is less.
LED D3 Fixture shall be #
WIDE GAMUT
CIE 1931 Color Chart
Ketra’s tunable spectrum D3 downlight can easily be configured via Ketra’s intuitive Design Studio software. The product can reproduce any color point within the triangle shaped gamut indicated in the chart below. With Ketra’s innovative optical and thermal feedback system, the color point is maintained to an accuracy of <1 MacAdam ellipse over the lifetime of the product and across operating temperature range
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0.00 .1 0.20 .3 0.40 .5 0.60 .7 0.8
x
y
520
540
560
580
600
620
700
360460
470
Blue: 0.170, 0.110
Black Body
Red: 0.681, 0.307
Calibrated Gamut: Color point is maintained to an accuracy of <1 MacAdam ellipse over the lifetime of the product and across operating temperature range.
Expanded Gamut: Color calibration is relaxed such that each product produces the most saturated color it is cabable of.
Green: 0.256, 0.600
480
480
500
Designed in Austin, TX 512-347-1100 | ketra.com © 2019 Ketra, Inc. All rights reserved
770-000028-04 r12Specifications are subject to change without notice
D3 ADJUSTABLE, SQUARE
TROUBLESHOOTING
The D3 uses built-in tests to check wiring and wireless connectivity. These tests run each time the D3 turns on, and may take several minutes.
Note: The D3 will NOT run these tests while provisioned to a Design Studio installation.
If the D3 finds a problem, it will let you know by emitting a corresponding color or, if no emitter is connected, by flashing the indicator lights on its power supply.
DIAGNOSTIC COLORS (REQUIRES EMITTER)The D3 will emit a color to tell you the type of problem.
COLOR CONDITION CORRECTION
Red Invalid input voltage on the power line Ensure the input voltage matches the expected voltage for the D3’s model.
Magenta Poor wireless connectivity
Ensure that the D3 is notin a metal enclosure and that there are no significant obstructions between the D3 and other Ketra devices.
Note: In some circumstances, magenta is expected. See the note below the table.
Yellow Fair wireless connectivityEnsure that the D3 is not in a metal enclosure and that there are no significant obstructions between the D3 and other Ketra devices.