d:!1k-comm customershammerall ev cut sheet filescut sheet ...hammerall.com/model_c-500.pdf · using...

2
Job: Item: q MODEL C-500 Food Waste Disposer 2HP - 1 Phase and 3 Phase HAMMERMILL DYNAMICS - SOLID STEEL- ELIMINATES PLUMBING PROBLEMS - QUIET OPERATION - LEGENDARY DURABILITY - Grind action occurs between high RPM, swing-type hammers, and a stainless steel grind screen. Like no other disposer, our Hammermill is built for the long haul. Fabricated of rugged steel plate, using all welded, one-piece construction, it is finished with a durable powder-coated finish. A unique, stainless steel grind screen allows only food particles of 1/4" or smaller to enter the drain. The high RPM, precision balanced Hammermill shaft is carried on two heavy-duty, ball- type bearings, and sealed with two-part, mechanical, rotary shaft seals. The Hammermill design is engineered to resist jamming and serious damage when flatware is accidentally introduced into the grind chamber. q CA-50 SS q CA-50 SSP q CA-45 X q CA-60 SS q CA-55 SS NEMA 4 WATERTIGHT CONTROLS 2600 Pleasantdale Road • Suite 7 • Atlanta, Georgia 30340 Atlanta (770) 448-2540 Fax (770) 448-2538 Toll-Free (800) 818-5797 www.hammerall.com

Upload: others

Post on 12-Sep-2019

2 views

Category:

Documents


0 download

TRANSCRIPT

Job: Item:

� MODEL C-500Food Waste Disposer2HP - 1 Phase and 3 Phase

HAMMERMILL DYNAMICS -

SOLID STEEL-

ELIMINATES PLUMBING PROBLEMS -

QUIET OPERATION -

LEGENDARY DURABILITY -

Grind action occurs

between high RPM, swing-type hammers, and a stainlesssteel grind screen.

Like no other disposer, our Hammermill

is built for the long haul. Fabricated of rugged steel plate,using all welded, one-piece construction, it is finished with adurable powder-coated finish.

A

unique, stainless steel grind screen allows only food particlesof 1/4" or smaller to enter the drain.

The high RPM, precision

balanced Hammermill shaft is carried on two heavy-duty, ball-type bearings, and sealed with two-part, mechanical, rotaryshaft seals.

The Hammermill

design is engineered to resist jamming and serious damagewhen flatware is accidentally introduced into the grindchamber.

� CA-50 SS� CA-50 SSP

� CA-45 X

� CA-60 SS� CA-55 SS

NEMA 4 WATERTIGHT CONTROLS

2600 Pleasantdale Road • Suite 7 • Atlanta, Georgia 30340Atlanta (770) 448-2540 Fax (770) 448-2538 Toll-Free (800) 818-5797

www.hammerall.com

MODEL C500� 1 PHASE 3 PHASE

SPECIFICATIONS:

MOUNTING -

C-500 ENCLOSURE -

GRINDING ELEMENTS -

DRAIN SCREEN -

MOTORS-

Food Waste Disposer 2 HP

APPLICATION - SOILED DISHAND POT SINKS

The C-500 rests on four (4) adjustable,stainless steel legs, and attaches to the underside of thesink or cone with a 6 / " diameter rubber adapter.

The belt-driven grind chamberand high efficiency, industrial-duty motor are mounted on apowder-coated steel base and surrounded by a stainlesssteel housing.

The Hammermill rotor shaftis constructed of solid, high-technology steel and steelalloys, which ensure long-lasting, durable performance.

Heavy-duty, 11 GA stainless steelscreen has 82.5 square inches of drainable surface area.Its unique design allows only food particles of ¼" or smallerto enter the drain.

TEFC (Totally Enclosed Fan Cooled) motorsare premium efficiency (inverter duty rated) and mountedparallel to the grind chamber, thus protecting them fromseal failure related damage so common in direct drivedisposers.

5

8

SAMPLE SPECIFICATIONS:

HAMMERALL DISPOSER ELECTRICAL SPECIFICATIONS:

Phase Volts Cycle Amps

C-500 3 208 / 230 / 460 60 6.5 / 6.2 / 3.1C-501 1 115 / 220 60 20 / 10

Model Cone Disposer ElectricalSize Control Specifications

� � � �

C-500 18" CA60SS (230/60/3)

SAMPLE SPECIFICATIONS:

HAMMERALL DISPOSER ELECTRICAL SPECIFICATIONS:

INSTALLATION KIT

OTHER ACCESSORIES

Disposer Control, Solenoid Valve, and VacuumBreaker(Select Disposer Control Model on Front Page)

SS-Control Mounting PlateCone (Select Cone Size Above)CP-115 Stainless Steel Mounting RingOffset Safety Chute and SS Mounting RingSS Mounting Ring

2600 Pleasantdale Road • Suite 7 • Atlanta, Georgia 30340Atlanta (770) 448-2540 Fax (770) 448-2538 Toll-Free (800) 818-5797

www.hammerall.com

SOILED DISH AND POT SINK