48.171223.4

30.98786.9

27.10688.4 26.79

680.4ACTIVEAREA

47.621209.6ACTIVEAREA

54.641387.8ACTIVEAREA

18.98482.0

3.8698.0

12.28312.0

.4912.4

8.43214.0

12.85326.4

USE 5X M6 THREADED SECONDARY MOUNTING HOLES WHEN FASTENING TO A SURFACE OR FIXTURE. 20mm MAX THREAD PENETRATION.

.287.1

.4210.6

9.57243.1

12.59319.9

2.9575.0

5.22132.5 FRONT OF GLASS

3.8898.6

IR SENSOR LOCATION

C

VENTED AREA KEEP CLEAR

KEEP ALL VENTEDAREAS (NOT SHOWN)

CLEAR ON THIS SURFACE

DETAIL CSCALE 1 : 3

RS-232, DB-9 FEMALE

REMOTE IR

USB-A, SERVICE PORT

LAN

USB-B

LINE AUDIO

SPDIF AUDIO

1.1830.1

45.0°

12.30312.4

2.2657.5

21.65550.0

10.83275.0

10.83275.0

21.65550.0

D

USE 5X M6 THREADED PRIMARY MOUNTING HOLES WHEN FASTENING

TO A SURFACE OR FIXTURE. USE AT LEAST 3X FOR MOUNTING THE DISPLAY.

20mm MAX THREAD PENETRATION.

KEEP ALL VENTEDAREAS (NOT SHOWN)

CLEAR ON THIS SURFACE

DETAIL DSCALE 1 : 3

C14 AC INPUT

KEYPADHDMI 2.0DIGITAL INPUTS

HDMI 1.4DIGITAL INPUTS

DISPLAYPORT 1.2DIGITAL INPUT

DISPLAYPORT 1.2DIGITAL OUTPUT

REVISION HISTORYECO ZONE REV. DESCRIPTION DATE APPR'D

A INITIAL DRAWING RELEASE 7/8/2019 NABB ADDED MAX THREAD DEPTH FOR FIXED INSTALLATION 7/30/2021 MRW

12345678

12345678

AA

BB

CC

DD

THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO PLANAR SYSTEMS, INC., ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF PLANAR SYSTEMSIS PROHIBITED. THIS DRAWING IS SUPPLIED FOR INFORMATION, IDENTIFICATION, ENGINEERING, EVALUATION, AND/OR INSPECTION PURPOSES ONLY AND MAY NOT BE USED AS BASISFOR THE MANUFACTURING OF PRODUCTS OR THE FURNISHING OF SERVICES TO PLANAR SYSTEMS OR TO ANY THIRD PARTY UNLESS AUTHORIZED IN WRITING BY PLANAR SYSTEMS.

TOLERANCES:

ENGR BY

DRAWN BY

CHECKED BY

USED ON

MATERIAL

FINISH

NAB 01 Jul 19PLANAR SYSTEMS, INC.1195 NE COMPTON DRIVEHILLSBORO, OR 97006 USA

LO552-STITLE

SIZE

DPART NO.

998-1484-00DRAWING NO.

LO552-S Product OutlineREV

BSCALE

1:6 DO NOT SCALESHEET

1 OF 2

050-0218-02 REV B

THIRD ANGLE PROJECTION

DIMENSIONING AND TOLERANCING PERASME Y14.5M-1994

UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS [INCHES].

= ±1°

XX= ±.25

.X= ±.5

X= ±1

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.1.

NOTES: UNLESS OTHERWISE SPECIFIED.

.5514.0

.5514.0

2.3660.0 THUMB

SCREW

BACKINGPLATE

FRONTPLATE

2.3660.0

.061.5

.4611.8

2.3660.0

.5514.0

1.3734.8

.225.5

THUMBSCREW

BACKINGPLATE

FRONTPLATE

2.3660.0

.5514.0

1.5940.4

1.5940.4

.4511.3

BACKING PLATE

THUMBSCREW

FRONTPLATE

4X2 ARRAY, SHOWN WITH TILING BRACKETS

1

3

2

.061.5

48.171223.4

96.392448.3

.061.5

40.541029.8

81.152061.1

5.22132.5

2X2 ARRAY, SHOWN WITH TILING BRACKETS

SIDE STRAIGHT MOUNT ITEM # 2

CENTER STRAIGHT MOUNT ITEM # 1CENTER ANGLE MOUNT ITEM # 3

12345678

12345678

AA

BB

CC

DD

THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO PLANAR SYSTEMS, INC., ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF PLANAR SYSTEMSIS PROHIBITED. THIS DRAWING IS SUPPLIED FOR INFORMATION, IDENTIFICATION, ENGINEERING, EVALUATION, AND/OR INSPECTION PURPOSES ONLY AND MAY NOT BE USED AS BASISFOR THE MANUFACTURING OF PRODUCTS OR THE FURNISHING OF SERVICES TO PLANAR SYSTEMS OR TO ANY THIRD PARTY UNLESS AUTHORIZED IN WRITING BY PLANAR SYSTEMS.

SIZE

DPART NO.

998-1484-00DRAWING NO.

LO552-S Product OutlineREV

BSCALE

1:10 DO NOT SCALESHEET

2 OF 2

050-0218-02 REV B

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.1.

NOTES: UNLESS OTHERWISE SPECIFIED.