d copyright 2002 gy solutions, inc
TRANSCRIPT
![Page 1: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/1.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
1
Cylinder BoreCylinder BoreSurface Texture AnalysisSurface Texture Analysis
Mark C. Malburg, Ph.D.Digital Metrology Solutions, Inc.
010001000100110101010011010001000100110101010011010001000100110101010011010001000100110101010011
DigitalMetrologySolutions
![Page 2: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/2.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
2
OverviewOverview
• Why is plateau honing important?• How do you measure this?
– Instruments, settings (and problems)
• How do you describe the surface?– Traditional methods– Rk parameters
– Probability Parameters
![Page 3: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/3.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
3
Cylinder Liners/BoresCylinder Liners/Bores
• “Let the engine do it”– Given a rough surface, the engine
will/may plateau itself.• Time, debris, wear of other components
• Plateau Honing– Generate a rough surface and remove
the high areas in a controlled manner.
![Page 4: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/4.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
4
Plateau HoningPlateau Honing
![Page 5: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/5.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
5
Why Plateau Honing?Why Plateau Honing?
Generate a surface texture that has the benefits of a smooth surface and
the benefits of a rough surface.
Smooth on top
Rough underneath
![Page 6: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/6.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
6
Surface FunctionalitySurface Functionality
• Friction? Running clearance?– Smoother plateau
• Wear? Sealing?– More contact area
• Lubrication Retention? Debris Collection?– Increased valley volume
![Page 7: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/7.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
7
A Complete Report (2D + 3D)A Complete Report (2D + 3D)
![Page 8: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/8.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
8
Stylus Based ApproachesStylus Based Approaches
• Two basic means– Skidless
• Laboratory Style• Stylus Tip is the
only thing that contacts the surface.
– Skidded• A radiused “skid”
rests on the surface and serves as a reference.
![Page 9: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/9.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
9
Skidless MeasurementSkidless Measurement
• Provides “true” picture of surface– Including waviness
• Alignment is critical– Limited Working Range
• Sensitive to Vibration– Test by measuring an
optical flat.
![Page 10: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/10.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
10
Skidded MeasurementSkidded Measurement
• The stylus tip moves relative to this skid.– Various skid designs
• Waviness is hidden.– The skid “follows”
waviness.
• Sensitive to debris– Generating artificial
waviness.
![Page 11: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/11.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
11
Errors Due to “TrailingErrors Due to “Trailing--Skid”Skid”
• While the skid and stylus are on the same level, the measurement is acceptable.
• When the stylus encounters a peak, it is recorded in the output data set.
d
![Page 12: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/12.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
12
Errors Due to “TrailingErrors Due to “Trailing--Skid”Skid”
• When the skid encounters a peak, the stylus moves downward.
• The resulting profile has a “depression” based on the skid position and geometry.
d
d
![Page 13: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/13.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
13
Errors Due to “TrailingErrors Due to “Trailing--Skid”Skid”
![Page 14: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/14.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
14
Traditional FilteringTraditional Filtering
![Page 15: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/15.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
15
Robust FilteringRobust Filtering
![Page 16: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/16.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
16
Parameterization ApproachesParameterization Approaches
• Traditional– Ra, Rz, tp
• Rk– Rk, Rpk, Rvk, Mr1, Mr2– Based on the analysis of the bearing
ratio curve.
• Probability– Rpq, Rvq, Rmq– Based on normal probability analysis.
![Page 17: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/17.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
17
Traditional ParametersTraditional Parameters
• RaThe average deviation from the mean line.
![Page 18: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/18.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
18
Traditional ParametersTraditional Parameters
• Ra in the context of Plateau Honing– Ra tends to be most sensitive to the
plateaus of the surface since there are more data points in the plateau.
![Page 19: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/19.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
19
Traditional ParametersTraditional Parameters
• Rz – Historically Rz according to DIN
(German) standards.– Some instruments report this as Rtm.
(mm)
(µm
)
Rz (ISO-1995, ASME-1995, DIN)
![Page 20: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/20.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
20
Traditional ParametersTraditional Parameters
• Rz in the context of Plateau Honing– Rz tends to be most sensitive to the
surface’s valleys as they make up most of the peak-to-valley distance.
![Page 21: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/21.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
21
Traditional ParametersTraditional Parameters
• tp (Rmr)– At a given depth,
the profile is sliced (horizontally) and the material percentage is reported.
![Page 22: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/22.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
22
Traditional ParametersTraditional Parameters
• Rmr in the context Plateau Honing– The depth at which bearing ratio is
often placed “just below” the plateau.– tp is sensitive to the number and width
of the valleys.
![Page 23: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/23.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
23
Traditional ParametersTraditional Parameters
• Ra, Rz and tp are “dependent” parameters– It’s very difficult to change just one without
affecting the others.
• There is some sensitivity to dirt/debris in Rz and tp (depending on the tp reference).
• Rz can be sensitive to “pull-outs”.• The Rz:Ra ratio should be considered
when trying to control the “shape” of the surface.
![Page 24: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/24.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
24
Rk ParametersRk Parameters
• Introduced in DIN 4776 (1985)• Currently standardized in ISO
13565-2– Based on describing the bearing ratio
curve with line segments.– Intended to characterize 3 components
of the surface: • Core/Kernel (Rk)• Peaks (Rpk, Mr1)• Valleys (Rvk, Mr2)
![Page 25: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/25.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
25
Rk ParametersRk Parameters
• Step #1: Establish the “Kernel”– Use a 40% window to find the most
horizontal region.
![Page 26: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/26.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
26
Rk ParametersRk Parameters
• Step #2: Based on the Rk line, find the “peak” and “valley” transitions.– Mr1 and Mr2
![Page 27: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/27.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
27
Rk ParametersRk Parameters
• Step #3: Peak and valley parameters.– Rpk, Rvk = reduced peak and valley
“roughnesses”
![Page 28: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/28.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
28
Application to Plateau HoningApplication to Plateau Honing
• While serving as an improvement over the “traditional” approach, Rk analysis does not provide a good model of plateau honing. (Particularly in the valley region.)
![Page 29: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/29.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
29
Probability ModelProbability Model
Combination of two random textures:Valley-making Process
Plateau Process
Combination of Processes
![Page 30: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/30.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
30
Normal Probability PaperNormal Probability Paper
![Page 31: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/31.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
31
Probability ParametersProbability Parameters
Rpq
Rvq
Rmq
![Page 32: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/32.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
32
Application to Plateau HoningApplication to Plateau Honing
• This method has been standardized (ISO 13565-3) – Rpq: Plateau RMS Roughness– Rvq: Valley RMS Roughness– Rmq: Plateau-Valley Transition Bearing Ratio
![Page 33: D Copyright 2002 gy Solutions, Inc](https://reader035.vdocuments.us/reader035/viewer/2022081622/613d6536736caf36b75cd357/html5/thumbnails/33.jpg)
Copyright 2002Digital Metrology Solutions, Inc.
33
SummarySummary
• Functionality– Plateau honing continues to be a very
important process technology.
• Measurement Issues:– Measurement ideally consists of a
combination between area and profile based measurement.
– Beware of “shop-floor” (skidded) instruments.
• Specification Issues:– 3 Basic parameter schemes (and
combinations thereof) are commonly standardized and in use.