documentcv

4
Ahmed Akram Mohamed Address : Al-Haram, Giza, Egypt. Mobile : +201001970006. Telephone : +233823851. Email : [email protected] Objective “To obtain a position where I can develop my skills professionally and become a successful employee.” Education 1998-2009 Orman Experimental Language School. 2009- Feb 2015 German University in Cairo – GUC Faculty of Engineering & Material Sciences- Mechatronics Engineering. Bachelor project in Characterizing and Control of Concentrated Photovoltaic thermal System. GPA: 3.00 " GOOD" Key Courses Mechatronics Engineering (microcontroller). Mechatronics lab (PLC & Pneumatics). Advanced Mechatronics. Medical robots. Sensor Technology. Industrial Automation (CNC & Advanced CNC). Workshop : Remotely Operated underwater Vehicles (ROV) from Zewail City of Science and Technology . Workshop : International youth innovative forum for energy workers and manufacturers Forsazh - 2016 (New Generation), took place in Obninsk, Russia.

Upload: ahmed-akram

Post on 14-Apr-2017

17 views

Category:

Documents


1 download

TRANSCRIPT

Ahmed Akram Mohamed

Address: Al-Haram, Giza, Egypt.

Mobile: +201001970006.

Telephone: +233823851.

Email: [email protected]

Objective “To obtain a position where I can develop my skills professionally and become a successful employee.”

Education 1998-2009 Orman Experimental Language School.

2009- Feb 2015 German University in Cairo – GUC Faculty of Engineering & Material Sciences- Mechatronics Engineering. Bachelor project in Characterizing and Control of Concentrated Photovoltaic thermal System. GPA: 3.00 " GOOD"

Key Courses Mechatronics Engineering (microcontroller). Mechatronics lab (PLC & Pneumatics). Advanced Mechatronics. Medical robots. Sensor Technology. Industrial Automation (CNC & Advanced CNC). Workshop: Remotely Operated underwater Vehicles (ROV) from Zewail City of Science and Technology. Workshop: International youth innovative forum for energy workers and manufacturers Forsazh - 2016 (New Generation), took place in Obninsk, Russia.

SITRAIN certification program from Siemens: Automation systems -programming.

• PLC PRO1: (Aim & Objectives)

Write programs and diagnose errors using S7 software package on S7- 300/400 PLC’s.

• PLC PRO2: (Aim & Objectives)

Write advanced programs, use program breakpoints to test the operation of the program and diagnose errors using the S7 software package on S7-300 or S7-400 PLC’s.

• PLC PRO3: (Aim & Objectives)

Structure and create complex S7 programs, making it possible to efficiently work with STEP 7 and thus reduce the engineering phase.

Internships 8/2011-9/2011 Mercedes-Benz – Street 9, Maadi, Cairo, Egypt. Trained in the workshop, learned how to know the errors in the car using Car Diagnostic software and think how to solve those errors and then try all the possible solutions then check If there are any errors to make sure that the problem has been solved.

8/2014-9/2014 PETROBEL (Belayim Petroleum Company ) – El Mokhayam El Dayem St . Nasr City , Cairo, Egypt. Trained in the power station, Liquefied petroleum gas(LPG), in the petrico, and in the workshop at Abu Ridis site.

Experiences Production engineer at El-Wahab Group - 6 of October

City Area No. 15/244 Industrial Zone No.3.(June 2015-July 2015)

• Achievements and responsibilities: 1. Leading the workmen for producing cars with the best

quality. 2. produce around two or four cars per day.

Technical Office Engineer at Minta for Trade and Agencies - 39 Degla Street, off Shehab Street, Mohandesseen, Giza, Egypt. (September 2015- Current job).

• Achievements and responsibilities: 1. Our scope is concerning in construction and petroleum

services, I receive the BOQ and specs from the client then make the right design for the suitable selection in seismic restrains and vibration isolations for all the equipment (pumps, chillers, cooling towers, air handling units, fans, fan coil units, generators, and transformers) and fire fighting, chilled water, electrical and, plumbing networks using MASON guidelines.

2. Also for valves, I choose from NIBCO valves or any other supplier the suitable valve that meets the specs according to its pressure rating and the purpose of use (fire protection, plumbing, or domestic water).

3. In plumbing, I used to select from ZURN (drainage accessories supplier) the suitable selection according to the specs.

4. After the selection, I make the quotation by listing the prices with all terms and conditions and send it to the client.

5. Make a full submittal for the In-hand projects containing all the calculations, data sheets, & compliance sheet to give it to the client with the quotation.

6. Make supervision inspection for each project two times per month to give the approval for the right installation.

Projects:

Nile Cornish Project, West Cairo Airport, Al-Melez Airport, Nozha

Airport, Police Academy, ABC Bank, Zewil City, Dar El-Eshara(Golden Domes Hotel), Sodic The Polygon, Al-Azhar Faculty of Pharmacy, Marassi Golf Hotel, Mountain View, Hurghada City Center, Almaza City Center, Tycoons project, PGESCo Office Building, Secon Nile Towers, New Capital City (Al Masah- Hotel, Japan University, Assiut Supercritical power station, Shepheard hotel, and 6 October University Hospital Extensions.

Skills Computer Skills: Microsoft office word, Microsoft office PowerPoint, Microsoft office excel, JCreator, Eclipse, MPLAB, EMCO software, Solidworks software, and AutoCAD software.

Other: Designing and building up projects individual and in group and implementing electronic circuits.

Languages Arabic: Mother Tongue. English: very good. German: good. French: good.

Activities Fishing, Travelling and playing football.