Dipl.-Ing. Tajuddin, M.Sc.

Contact Info Address : Block 4, Street No. 18, Building Number 98, 2nd Floor, Room 8,

Mangaf Area, Kuwait Email : tajuddin_nur2002@yahoo.com Telephone : +965 23855259 Mobile : +965 69983729 Skype Id : tajuddin.noor

Personal Particulars Age : 41 years 8 month(s) Date of Birth : 27 Oct 1973 Nationality : Indonesia Gender : Male Passport No. : V 846763 Permanent Residence : Indonesia

Highest Qualification Master's Degree / Post Graduate Degree Field of Study : Engineering (Mechanical) Major : Automotive, Construction, Manufacturing, oil and gas Institute/University : Automotive Institute / RWTH-Aachen, Germany CGPA : 3/4 Graduation Date : Dec 2004

Latest Employment Kuwait National Petroleum Company (KNPC) Position Title : Mechanical Engineer Project Position Level : Staff Specialization : Engineering - Mechanical Industry : Oil / Gas / Petroleum Duration : 2014 - Present

Top Skills (Proficiency: Advanced - Highly experienced; Intermediate - Familiar with all the basic functionalities; Beginner - Just started using or learning the skill) Skill Years Proficiency AutoCad 5 Advanced Catia Software 3 Advanced

ADAMS/Car 2 Advanced Systematic Engineering Design 2 Intermediate C++ Language 1 Intermediate Project Management 10 Intermediate

Languages

(Proficiency: 0=Poor - 10=Excellent) Language Spoken Written Bahasa Indonesia 10 10 English 9 9 German 8 8 Arabic 7 7

CURRICULUM VITAE DIPL.-ING. TAJUDDIN, M.Sc. Mechanical Engineer Project Kuwait National Petroleum Company (KNPC) Refinery Mina Al-Zour Kuwait Mobile: +965 – 69983729 Email: tajuddin_nur2002@yahoo.com PROFESSIONAL EXPERIENCES

March ‘14-current Working by Kuwait National Petroleum Company (KNPC) as Mechanical Engineer Project for New Refinery Project (NRP)

Job Descriptions and Role Responsbilities:

• Review, evaluate and recommend pre engineering and engineering concepts, designs and development for mechanical systems and plants associated with the Company's oil and gas production, pressure maintenance, transport and export, such as steam generating unit, air system, water system, cooling water, water treatment, heat exchanger with refrigerant tubes (HVAC), pumps, compressors, etc .

• Making sure about flow assurances and flowlines well done, such as piping and pipeline systems. It must be supported with good separation storage, pumping facilities, mechanical packages (e.g. air drier and instrument air), water and gas injection facilities ( air and nitrogen as separation unit result), utilities, etc.

• Ensuring technical integrity and HSE requirements are fullfilled and to be met cost effectively throughout the development cycle and good protections such as fire water in fire fighting. Provide expert / consultancy service to other engineers / users and recommends designs for modifications and/or requests for mechanical engineering support. Technical Presentation for certain specifications and general sytem to contractor and vendor to clarify the system. Provide technical advice to operating divisions on all relevant engineering aspects.

• Provide guidance and support to engineers in the discipline as the reference point for all the technical issues of my discipline.

• Develop conceptual design options for mechanical systems and plants taking all relevant factors into consideration. This includes :

o Defining data collection parameters, and obtains information from internal and external sources to support the development of conceptual design options.

o Directing and co-ordinating the activities of a team of mechanical engineers. o Recommend and design studies to evaluate and identify the most appropriate

and cost effective design concepts. • Evaluate / endorse modification requests involving a wide variety of mechanical

systems o Review and endorse recommendations, cost estimates and appropriate

technical back-up. o Review and endorse conceptual designs and specifications for approved

modification requests. • Use expertise to challenge effectively current policies / standards and to develop new

techniques or approaches to improve operating performance. • complex, multi-disciplinary problems, especially to give inputs for process flows • Review and endorse tender and contract documents related to mechanical projects. • Endorse selection of equipment including investigation and recommendation of

suppliers and tenders analysis. • Design studies to evaluate new technology and evaluate / introduce international good

practice. • Keeps up-to-date with International Standards and codes to ensure that COMPANYs'

standards are updated and that the most appropriate equipment and materials are used. • Participate in the training and development of assigned national employees. Include

assessing training and development needs, preparing structured development / familiarization programs, monitoring and reporting on progress and counseling employees, as required.

• Knowing the company health, safety and environmental policy, procedures, regulations and objectives as they relate to area of responsibility, and ensures that they are effectively implemented in domain.

Aug13- Feb14 Project Coordinator by GIZ (deutsche Gesselschaft fuer Internationale Zusammenarbeit, Technical German for International Cooperation)

Job Descriptions and Role Responsbilities:

1) Assist in originating and executing investment opportunities in upstream and downstream 2) Assist in evaluating projects and investment decisions 3) On-the-internship on how to conduct & lead negotiations with governments & companies 4) On-the-internship Strategy on how to coordinate deal teams from the evaluation of investment opportunities to final execution 6) Develop and analyze financial models

7) Financial Analysis and problem solving 8) Attention to detail and strong organizational 11) Under general supervision, it is responsible to support planning of project and coordinate with other professional and support staffs and consultants.

12) General Project

• Analyzes and makes recommendations using advanced planning and statistical methods, modeling, and budgeting and financial analyses;

• Provides guidance to project components in cooperation with other professional staff and consultants;

• Develops work plans and budget estimates for project components;

13) As Coordinator • Provides technical advice • Links project to ongoing activities as requested • Maintains of an overall good flow of communication and information between all

involved institutions, mainly counter partner • Develops strategy for acquisition and participation in the project • Develops project to supporting project activities • Conducts the political dialog in middle and high level to related stakeholders • Organizes and manage the project activities

14) General Duties Provides support in organizational and management questions Consults routinely with advisors regarding all kinds of project activities Assist in and/or carry out other project activities and other tasks as assigned

Apr13-Jul13 EPCI (Engineering, Procurement, Construction and Installation) PT. Supraco Indonesia for Project Managing Santos Oil and Gas Company (Australia Company) to Project Maleo

Job Descriptions and Role Responsbilities:

- Project Management & Supervision, Engineering & Construction Support Engineering, Procurement & Spare Part Material, Fabrication & Construction, Installation, Erections, Assembly, Hook-Up and Tie-In, Inspection, Testing, Pre Commissioning / Comm and Start-Up

- Load out, Sea Fastening, Marine surveyor and Transportation Preparation, Management Team - Head Office, Management and Supervision Team - Site Office, QA / QC Team (all discipline, including equipment)

- Safety Team, Safety Procedures & Equipment – PPE, Permits, Obtaining Permits to meet Regulations, Meetings and Reporting, Transportations and accommodations, Expenses for the Project Set -Up and Project Start Up period, Contractor Insurances, Procurement Management, Material Tracking and Expeditor, Other Various Project Management to complete THE WORK

- Engineering of Precommissioning & Procedures, Engineering of Commissioning & Procedures, Engineering of Ready For Start Up (RSFU) & Procedures, Other Eng to Support Fabrication and Construction, Other Engineering and Drawings to support design appraisal for Migas 3rd party and Certifications

- Engineering and Perform JHAs, Engineering for Preparation Offshore Hook-Up, Installation Aids, Engineering for the Offshore Lifting arrangement , Slings and Tackles requirements, Initial Consumables for Pre Comm and Commissioning

-

Apr06-Mar13 Working by PPPTMGB “Lemigas” (Oil and Gas Company) as Senior Mechanical Engineer and Project Coordinator

Job Descriptions:

• Technical Evaluations for various fuel system to vehicle and industry application. Doing analysis about efficiency and effectivity, comparing and adding for any additives or chemical substances to increase performance and power of energy system in application.

• Cylinder and vessel pressure test, especially for gas fuel with operating pressure 200 bar. Test pressure is done about 250 bar. Design pressure is made in range of 300 bar. Analysis about possibilities of corrosion in cylinder or vessel. Doing some regulations for cleaning and preparing cylinder well from condensate and other foreign dirties which can damage cylinder or vessel.

• Doing some road tests for vehicles which are applied for high pressure cylinders that they’re on right conditions to be used. Chasis dynamometer, exhaust gas tests in laboratory shall be done first.

• Review, evaluate and recommend pre engineering and engineering concepts, designs and development for mechanical systems and plants associated with the Company's oil and gas production, pressure maintenance, transport and export, such as steam generating unit, air system, water system, cooling water, water treatment, heat exchanger with air or refrigerant tubes (HVAC), pumps, compressors, etc .

• Making sure about flow assurances and flowlines well done, such as piping and pipeline systems. It must be supported with good separation storage, pumping facilities, mechanical packages (e.g. air drier and instrument air), water and gas injection facilities ( air and nitrogen as separation unit result), utilities, etc.

• Ensuring technical integrity and HSE requirements are fullfilled and to be met cost effectively throughout the development cycle and good protections such as fire water in fire fighting. Provide expert / consultancy service to other engineers / users and recommends designs for modifications and/or requests for mechanical engineering support. Technical Presentation for certain specifications and general sytem to contractor and vendor to clarify the system. Provide technical advice to operating divisions on all relevant engineering aspects.

• Provide guidance and support to engineers in the discipline as the reference point for all the technical issues of my discipline.

• Develop conceptual design options for mechanical systems and plants taking all relevant factors into consideration. This includes :

o Defining data collection parameters, and obtains information from internal and external sources to support the development of conceptual design options.

o Directing and co-ordinating the activities of a team of mechanical engineers. o Recommend and design studies to evaluate and identify the most appropriate

and cost effective design concepts. • Evaluate / endorse modification requests involving a wide variety of mechanical

systems o Review and endorse recommendations, cost estimates and appropriate

technical back-up. o Review and endorse conceptual designs and specifications for approved

modification requests. • Use expertise to challenge effectively current policies / standards and to develop new

techniques or approaches to improve operating performance. • complex, multi-disciplinary problems, especially to give inputs for process flows

• Review and endorse tender and contract documents related to mechanical projects. • Endorse selection of equipment including investigation and recommendation of

suppliers and tenders analysis. • Design studies to evaluate new technology and evaluate / introduce international good

practice. • Keeps up-to-date with International Standards and codes to ensure that COMPANYs'

standards are updated and that the most appropriate equipment and materials are used. • Participate in the training and development of assigned employees. Include assessing

training and development needs, preparing structured development / familiarization programs, monitoring and reporting on progress and counseling employees, as required.

• Knowing the company health, safety and environmental policy, procedures, regulations and objectives as they relate to his area of responsibility, and ensures that they are effectively implemented in domain.

• Endorse selection of equipment including investigation

Many projects are done:

2011 Slip crushing load consideration for drilling at TU Clausthal, Germany

2010 Assistant Mill Manager at Crude Palm Oil Refinery at IJM Plantation, Malaysia

2009 Natural Gas Hydrate Project at Technical University (TU) Dresden in cooperation with Tinco GmbH, Germany

2009 Liquefied Natural Gas (LNG) in cooperation with Linde AG company

2008 As team member for feasibility and design mobile Flare Gas Recovery Unit for Indonesian gas supply, DIPA TA 2008 DESDM

2008 Contribute in new material product development, existing material product modification and product implementation in oil and gas processing facilities

2007 As team member for feasibility study of CNG Mother Daughter Station, PT Daya Cipta Minergy

2007 Responsible for Material and Corrosion Management Program (Monitoring, Optimization, Review, and Consultancy) as the part of Asset Integrity Team (Operation and Engineering Excellence Department)

2007 Managing scale and corrosion monitoring devices installation and

retrieval program for onshore 2007 Contribute in gas well project by specifying material injection, corrosion

and scale monitoring, and sample point packages

2007 Contribute on Kerisi platform project (offshore) by developing new contract, screen product, and generate program for pour point depressant material treatment

2006 As team coordinator for Technical Evaluation of Liquified Gas Vehicle (LGV) Performance for Development of public transport in Jakarta, PT Itochu Indonesia

2006 As team member for Arrangement Draft of Indonesian National Standard for Compressed Natural Gas Utilization for Public Transport, DIPA 2006, DESDM

2006 As team member for Development Technology of Mini LNG Plant for utilization flare gas and marginal gas field, DIPA 2006, DESDM

April05-Mar06 Working by PT. MAC MULTIWAHANA as "Design Engineer"

Feb 2001-March05 Mechanical Engineer by Cemecon AG, Germany

Jan’2005 Mechanical Engineer by Herpers GmbH, Germany

Jan02-Dec03 Mechanical Engineer for combustion engine motor in vehicle by Meta GmbH, Germany

Oct00-Dec01 Mechanical Engineer Assistant by Philips AG branch Aachen, Germany

Aug98-Feb00 Working by PT. Hymindo Petromas Utama and PT. Citra Tubindo (Pipe Manufacturing for oil and gas) as Technical Support Engineer in Batam and Jakarta, Indonesia.

EDUCATIONS

1973 Born in Jakarta (Indonesia) on October 27, 1973

1980-1986 Elementary School (SDN Rawa Barat 03 Jakarta, Indonesia)

1986-1989 Junior High School (SMPN 56 Jakarta, Indonesia)

1989-1992 Senior High School (SMAN 6 Jakarta, Indonesia)

1992-1997 S-1 Degree of Mechanical Engineering Study Major at Diponegoro University Semarang, Indonesia, specialization: Energy Conversion

The title of my thesis: "Air Conditioning in Car with varying the Condition of Environment, Evaporator and Compressor from R-12 to R-134a"

2000 Studying in Metallurgical Engineering of M.Sc. Program (S-2) at Technical University Aachen (RWTH-Aachen, Germany)

2001 Studying in Automotive Systems Engineering of M.Sc. Program (S-2) of Mechanical Engineering Department at RWTH-Aachen, Germany

Title of Mini Thesis: Literaturrecherche Cold-Box-Verfahren fuer die Bauteile des Kraftfahrzeuges (Literature Research of Cold Box Process for Spare Parts of Vehicle)

Title of Master Thesis: A Study of A4-Four Link Front Suspension System Design Audi A4 with ADAMS-Software

2005 Studying Engineering Management at RWTH-Aachen, Germany in addition to M.Sc. degree

PUBLICATIONS

1996 TIG WELDING SOLUTION ON COMBUSTION CHAMBER OF

AEROPLANE AT GARUDA MAINTENANCE FACILITY (PT.

GARUDA INDONESIA)

1997 COMPARISON STUDY OF WORK FLUID R-134a TOWARD R-12 ON

AIR CONDITIONING OF VEHICLE AT LTMP (BPPT PUSPIPPTEK,

SERPONG)

2002 LITERATURRESEARCHE FUER BAUTEILE DES FAHRZEUGES

MIT DEM COLD-BOX VERFAHREN (FOUNDRY INSTITUTE OF

RWTH-AACHEN, GERMANY)

2003 STUDY FOR FOUR LINKS FRONT SUSPENSION OF AUDI A4 WITH

SOFTWARE ADAMS/CAR (AUTOMOTIVE INSTITUTE OF RWTH-

AACHEN, GERMANY)

2006 TECHNICAL EVALUATION OF LGV (LIQUIFIED GAS VEHICLE)

PERFORMANCE ON TOYOTA VIOS CAR 1500 CC AT PPPTMGB

“LEMIGAS”

COURSES AND SEMINARS

1993 TRAINING OF CNC - CAD / CAM MACHINE

1996 JOB TRAINING BY PT. GARUDA INDONESIA (GARUDA

MAINTENANCE FACILITY)

1997 INTERNSHIP BY LTMP (LABORATORY FOR

THERMODYNAMICS, MOTOR AND PROPULSION) IN

PUSPIPTEK-SERPONG,INDONESIA

2000 TOEFL COURSE WITH SCORE 590 IN FINAL RESULT

2001 GERMAN COURSE WITH GOOD RESULT

2003 PARTICIPATING FOR INDONESIAN SCIENTIFIC MEETING (ISTEC,

CHAPTER EUROPE) IN GERMANY

2003 EXCURSIONS TO COMPANIES IN ENGLAND AND GERMANY

(BMW, AUDI, ASTON MARTIN,ETC.)

2003 PARTICIPANT OF INTERNATIONAL BUSINESS MANAGEMENT

COURSE

2004 PARTICIPATING FOR INTERNATIONAL BUSINESS CULTURE

SEMINAR IN GERMANY

2005 PARTICIPATING FOR BONDING TECHNOLOGY FAIR IN AACHEN,

GERMANY

2006 20th June: RULE TO WRITE SCIENCE REPORT or JOURNAL

2006 21th June: PARTICIPANT TO “INDONESIAN BASIN POTPOURRI:

FACT, OPINION, AND CONTROVERSIES” SEMINAR

2006 3 - 7th July: TRAINING FOR CONTROLLING CORROSION IN THE

FACILITIES OF OIL AND GAS PROCESSING APPARATUS

2006 28th August: CALIBRATION AND MEASUREMENT CERTAINTY

2006 8th September: ADVANCED QUALIFYING COURSES FOR LPG AND

CNG CAR EQUIPMENT INSTALLATIONS, Itochu Indonesia – MTM

BRC Italia, Bekasi.

2006 11 – 13th December: TRAINING ON INSTALLATION AND

OPERATION OF AUTOMATED INHIBITOR INJECTION SYSTEM

2007 8 – 11th January: FORUM TO EVALUATE RESEARCH AND

DEVELOPMENT RESULTS OF OIL AND GAS IN 2006 BY PPPTMGB

“LEMIGAS”

2008 15th February: TWO DAYS TRAINING FUNCTION FOR REMOTE

VISUAL INSPECTION OF VIDEO PROBE XL PRO PLUS IN

INDUSTRIAL APPLICATION

2009 Compressed Natural Gas (CNG) Seminar of Asia Pacific Natural Gas

Association

REWARDS

2000 SCHOLARSHIP HOLDER OF COOPERATION BETWEEN DAAD,

INSTITUTE AND COMPANIES

2004 SCHOLARSHIP HOLDER OF MATCHING FUND FOUNDATION

(COOPERATION BETWEEN RWTH-AACHEN AND COMPANIES)

2006 THE BIG FIVE OF PRAJAB DESDM IN BANDUNG, INDONESIA

MANAGEMENT EXPERIENCES

1993 VICE CHIEF OF ROHIS

1994 MEMBER OF SCIENTIFIC ORGANISATION FOR STUDENT

1994 HEAD OF KSIM, MECHANICAL ENG. DEPT. AT DIPONEGORO

UNIV. (UNDIP)

1995 MEMBER OF SCIENTIFIC ORGANISATION FOR YOUNGERS AT

UNDIP

1998 HEAD OF YOUTH ASSOCIATION OF BLOK-S, SOUTH JAKARTA

2004 VICE HEAD OF PPI AACHEN (INDONESIAN STUDENTS ASSOC. IN

AACHEN, GERMANY)

2006 TEAM LEADER OF PRAJAB DESDM IN BANDUNG, INDONESIA

HOBBIES

VARIOUS SPORT ARTS ( BADMINTON, FOOTBALL, BASKETBALL, ETC.), READING, ORGANIZING FOR DIFFERENT ACTIVITIES (RESEARCH WORKS, SEMINAR, COURSE, ETC.)

BASIC SKILLS AND KNOWLEDGES

• Good communication skill in English • High capability of operating MS Word, MS Excel. MS Power Point, MS Outlook • Strong techniques of technical presentation • Strong analytical and conceptual thinking • Result oriented

ADVANCE SKILLS AND KNOWLEDGES

• Familiar with various Oil and Gas Technical Standards: API, ASME, ASTM, TEMA • Exposure in operation, maintenance, and trouble shooting for surface production

facilities: separators (vessel and tanks), heat exchanger (plate-frame and shell-tube), pumps and compressors, heating medium, glycol system, amine system, etc.

• Technical surface knowledge (tank cleaning and repair, sludge treatment, pipe maintenance, fluid flow and characteristics, etc.)

• Knowledge on corrosion inspection and monitoring methods (UT, radiograph scanning, pneumatic test, hydro test, intelligent pigging, thermal gun, ultra corr., acoustic emission, eddy current pulse, etc.)

• Familiar with root cause analysis, failure analysis • Oil and Gas Plant Process (PFD, P&ID, material and heat balances) :

Assessment, Operation, Optimization, and Modification • Involve on training and assessment for operation personnel by giving some series

of technical presentation: Gas Plant, Theory and Application, December, 2008 Fluid Flows, Theory and Application in Oil and Gas Industries, July, 2011 Pour Point Depressant, Theory, Application, and Modification, July, 2012

• Material performance monitoring (complete water analysis, residual monitoring, bacterial monitoring, online corrosion and scale monitoring, oil content, salt content, Total Petroleum Hydrocarbon, turbidity, ultrasonic test)

• Maintain day-to-day production operation material usage, cost tracking, and deviation rate KPI

• Justify regular (quarterly) material optimization based on performance monitoring data

• Involve in Risk Based Inspection program for Onshore • Management of Change strategy user • Vendor selection and operation (screening, monitoring, evaluating, and

coordinating)

PC-KNOWLEDGES

MS-OFFICE, BASIC, PASCAL, FEM-ANSYS, CATIA, AUTOCAD, ADAMS/CAR AND C++ PROGRAMMING

Deutsche Gesselschaft fuer International Zusammenarbeit (GIZ) GmbH

Menara BCA, 46th Floor, Jl. MH Thamrin No. 1, Jakarta 10310, Indonesia

Telephone: +62 – 21- 23587111 www.giz.de

Project Sustainable Urban Transportation Improvement Project (SUTIP)

PN.2008.2148.8-001.00 Bilateral Agreement and BMZ Commission for the period of 01.02.2009 – 30.09.2014

Expiry of Contract

Due to the ending of the employment contract between:

GIZ Project Sustainable Urban Transportation Improvement Project and Dipl.-Ing.Tajuddin, M.Sc.

both parties have reached the following agreement:

A. The employment contract of Dipl.-Ing.Tajuddin, M.Sc from 15.08.2013 to 31.08.2014 will end on 28.02.2014.

B. All obligations of both parties due to the ending of the employment contract of Dipl.-Ing. Tajuddin, M.Sc have been fulfilled and each party agrees to release the other party from any claim whatsoever that may arise due to previous employment.

C. This agreement shall be drawn up in duplicate. 1 Original for the Employee

1 Original for the Employer

1 Copy for Project Office

D. This agreement is prepared truthfully, made without any force in whatsoever forms and each party affixes its signature as an evidence of their agreement.

Jakarta, 28.02.2014

Hans Ulrich Fuhrke Dipl.-Ing.Tajuddin, M.Sc.

GIZ - SUTIP

DEPARTEMEN ENERGI DAN SUMBER DAYA MINERAL REPUBLIK INDONESIA

BADAN PENELITIAN DAN PENGEMBANGAN ENERGI DAN SUMBER DAYA MINERAL PUSAT PENELITIAN DAN PENGEMBANGAN TEKNOLOGI MINYAK DAN GAS BUMI

JALAN CILEDUG RAYA KAV. 109 - KEBAYORAN LAMA - JAKARTA SELATAN 12230 - INDONESIA

TELEKS : 47172, FAKSIMILE : 62-21 - 7246150, TROMOL POS : 1089 - JAKARTA 10010, KAWAT : LEMIGAS - TELP : (021) 7394422 (7 SALURAN), 7393958, 7394091, 7394778, 7394809, 7394856, 7394890, 7394901

CERTIFICATE OF EMPLOYMENT

Mr. Tajuddin was born on 27-10-1973 in Jakarta working at Research and Development for

Oil and Gas Technology

POINT HEAVY DUTY AND ACTIVITIES: Mr. Tajuddin perform tasks in Group Research and Technology Program Oil and Gas for

position as Senior Mechanical Engineer

DATE OF WORK DURATION Tajuddin had been working from April 1, 2006 up to March 31, 2013

WORKING TIME Time work weekly is 40 hours. This time is a regular time, which block the rules applicable in

the workplace.

Jakarta, March 31, 2013

Head of PPPTMGB “Lemigas”

Dr. –Ing. Evita H. Legowo

NIP. 100003394