cutting heating brazing correct pressure setting charts
DESCRIPTION
Oxygen Acetylene & LPG Gas Cutting Heating Brazing Correct Pressure Setting ChartsTRANSCRIPT
Manufacturers Recommended Pressure Settings for Welding, Cutting and Heating for Oxygen and Acetylene
Oxygen and Acetylene Cutting
Plate Thickness
mm
Nozzle Size
Pressure kPa Cutting Speed mm/min
Consumption
Oxygen Acetylene Oxygen 1/MIN Acetylene 1/MIN
6 8 200 100 450 20 3.5
12 12 200 100 380 38 4
20 12 220 100 340 42 4.5
25 15 250 100 320 56 6
40 15 350 100 270 75 7
50 15 400 100 240 85 7.5
75 15 450 100 180 95 8
100 20 400 100 150 134 9
125 20 450 100 150 215 10
150 24 500 100 130 232 12.5
Tip SizeRegulator Pressue kPa Gas Consumption
Oxygen Acetylene Oxygen 1/MIN Acetylene 1/MIN
8 50 50 2 2
10 50 50 3 3
12 50 50 4 4
15 50 50 6.5 6.5
20 50 50 12 12
26 50 50 22 22
32 100 100 38 38
8x12HT 150 100 58 55
4x24HT 200 100 100 95
Weld and Heat
Please note: Withdrawal rates from acetylene cylinders are limited to about 1/7 of the cylinder contents per hour, e.g. From a “G” size cylinder of 7m³ capacity, the maximum recommended flow is 1m³/hr ( 17L/min). For applications that exceed this capacity, cylinders should be manifold connected – If in doubt refer to the gas supplier. AS 4839-2001 The safe use of portable and mobile oxy-fuel gas systems for welding, cutting, heating allied processes.
Manufacturers Recommended Pressure Settings for Welding, Cutting and Heating for Oxygen and LPG Cutting
Oxygen and LPG Cutting
Plate Thickness
mmNozzle Size
Pressure kPa Consumption
Oxygen LPG Oxygen 1/MIN LPG 1/MIN
6 8 200 100 30 3.5
12 12 200 100 50 4
20 12 220 100 58 4.5
25 15 250 100 73 5.5
40 15 350 100 90 5.5
50 15 400 100 99 5.5
75 15 450 100 111 6
100 20 400 100 149 6
125 20 450 100 171 6.5
150 24 500 100 256 9
Tip SizeRegulator Pressue kPa Gas Consumption
Oxygen LPG Oxygen L/MIN LPG L/MIN
18x12HT 550 100 200 50
36x12HT 700 100 300 75
48x12HT 700 140 400 100
Oxygen and LPG Heating
Please note: AS 4839-2001 The safe use portable mobile oxy-fuel gas systems for welding, cutting, heating and allied processes.