cutting edge dry room for lithium battery testing & training€¦ · cutting edge dry room for...
TRANSCRIPT
Cutting Edge Dry Room for Lithium Battery Testing & Training WMG's Energy Innovation Centre comprises a battery characterisation lab plus an electric / hybrid drives test facility.
The Centre includes a cutting edge £13m Battery Materials Scale-Up Pilot Line.This provides a one-stop-shop for the development of new battery chemistries and detailed industrial evaluation for target
applications such as, automotive, power grids and consumer electronic products.
Munters specialist air treatment team, designed, supplied and installed the energy efficient Dry Room with Munters high efficiency MDU system with innovative heat recovery design at the heart of the system.
Complete supply and installation of a Dry Room:
• Consistent and accurate conditions• Turnkey supply of complete dry room• Achieves an ultra low dewpoint of
-45°C• Cutting edge design• MDU2000 desiccant dehumidifier• User friendly precise monitoring and
control• Energy Efficient
A constant -45°C dewpoint provides a stable environment, which is critical for keeping the electrolytes as dry as possible while producing and testing lithium pouch cells. Any moisture ingress at electrolyte filling can be detrimental to battery performance.
www.munters.com/WMG
Case study: WMG, University of WarwickDry Room for Lithium Battery Testing
The 9m x 5m Dry Room is just one part of the Pilot Line, accommodating up to 6 personnel, with a relative humidity of less than 1% and a continuous dewpoint of -45°C
The Dry Room contains all the pouch cell making equipment where moisture sensitivity on cell materials becomes an issue after drying of electrodes such as:
• Electrode Drying and Cropping• Stacking into cell stack• Insertion into pouch• Electrolyte filling
Conditions are maintained using Munters MDU system located next to the dry room, from here all moisture levels are monitored using an integrated Siemens control system.
Munters MDU2000 with a built in high efficiency energy recovery design has
a desiccant wheel at the heart of the air treatment system.
Munters specialist heat recovery coil design reclaims around 100KW of heat whilst the unit is running, channeling this to post heating of the dry room, removing the need for a similar sized electric heater.
Inside the Dry Room staff enter and exit through an airlock. Once inside the air flow is maintained via laminar flow of 25,000m³/h, moving from a supply wall at one end of the room to an extract wall at the other end.
Paul Blackmore, WMG Project Manager, comments...
"I want to know what moisture my products see at any point of production so, I always put the control sensors in the return air side as I know it's the worst case scenario.
With a single supplier for all the components of the drying chamber, WMG could realise construction in a very short time. Munters took over all details such as, cabling, lighting, flooring, windows and connections, completing the entire installation within a demanding time frame.
Munters also incorporated energy efficient LED ceiling lights and a Static Dissipate flooring into the design for added energy efficiency and practical static control. Extensive service and maintenance options are available for peace of mind.
Paul Blackmore knew he needed to find a supplier to fit the demanding needs of a low dewpoint desiccant wheel system with a proven track record in the battery industry for the state of the art dry room.
"I selected Munters due to their historical experience in providing low dewpoint solutions within battery applications.
Munters partnership approach delivered us a product that not only came within budget but also within a short time frame. The team coped well with the added difficulty of working within a confined space" says Paul
Munters team is dedicated to the improvement of low dewpoint solutions in the Lithium Battery manufacturing and research industry. Their continuous development of desiccant wheel (rotor) materials and in-house air circulation tools provide the lowest energy consumption whilst meeting the highest requirements of battery manufacture.
The Energy Innovation Centre will be the training ground for the next generation of battery chemists and one of Europe's leading centres of Lithium Battery Testing.
Energy Innovation Centre: www.wmghvmcatapult.org.uk
For more information on this and Munters' other low dewpoint applications visit:
www.munters.com/WMG www.munters.com/dryairforchemicals
Australia Phone +61 2 8843 1588, [email protected] Austria Phone +43 1 6164298-0, [email protected] Bel-gium Phone +32 1528 5611, [email protected] Brazil Phone +55 41 3317 5050, [email protected] Canada Phone +1 905 858 5894, [email protected] China Phone +86 10 8041 8000, [email protected] Czech Republic Phone +420 544 211 434, [email protected] Denmark Phone +45 4495 3355, [email protected] Finland Phone +358 20 776 8230, [email protected] France Phone +33 1 3411 5757, [email protected] Germany Phone +49 4087 96900, [email protected] India Phone +91 20 668 18 900, [email protected] Italy Phone +39 0183 52 11, [email protected] Japan Phone +81 3 5970 0021,[email protected] Korea +82 2761 8701, [email protected] Mexico Phone +52 722 270 40 49, [email protected] Netherlands Phone +31 172 433231, [email protected] Poland Phone +48 58305 3517, [email protected] Sin-gapore Phone +65 6744 6828, [email protected] South Africa Phone +27 11 997 2000, [email protected] Spain Phone +34 91 640 09 02, [email protected] Sweden Phone +46 8 626 63 00, [email protected] Switzerland Phone +41 52 343 8886, [email protected] Thailand Phone +66 2642 2670, [email protected] Turkey Phone +90 262 751 3750, [email protected] UAE +971 4 8809295, [email protected] United Kingdom Phone +44 8708 505 202, [email protected] USA Phone +1 978 241 1100, [email protected] Vietnam Phone +84 8 8256 838, [email protected]
MDU installation room Typical example of lithium pouch
Close upsupply wall
Close upextract wall