cutguard k5 1/4 zip jacket with mesh back pdf · 2021. 8. 12. · • astm d3884 abrasion level 3...
TRANSCRIPT
1 WWW.THINKNSA.COM 800.553.0672 [email protected] 9/7/21
cutGUARD K5 1/4 Zip Jacket with MeshBack
Specs
Product Code NXPK501_ _RG
Sizes SM-5X | Other sizes available upon request
Made To Order Colors text
Fabric / Material 13 oz. K5 HPPE Blend Knit
2 WWW.THINKNSA.COM 800.553.0672 [email protected] 9/7/21
Compliance
Standards
• ANSI/ISEA 105-16• ASTM F2992 Cut Level A7 (Cuffs/Collar)• ASTM F2992 Cut Level A5 (Sleeves/Body)• ASTM F2992 Cut Level A3 (Black Knit Wrist)• EN 388 Puncture Level 5• ASTM D3884 Abrasion Level 3• ASTM F1790-97
Features
Features
• Lightweight and breathable• Double layer stand-up collar lined with soft knit for comfort• Double layer cuff with inset knit wrist• Thumbhole keeps sleeve in place• Drop shoulder seams for extra comfort• Available with mesh back (mesh offers no mechanical protection)• Available with enhanced visibility trim• Made in the USA
Product Care
Product Care
• READ THE GARMENT LABEL AND LAUNDER PER INSTRUCTIONS ON GARMENTLABEL.• DO NOT use chlorine bleach or detergents containing bleach. DO NOT usefabric softeners. DO NOT iron. DO NOT dry clean.• Wash/Laundering Instructions: Machine wash cold. Tumble dry no heat. Tominimize shrinkage, do not over dry.• Wash according to the instructions above to remove any contaminants inorder to maintain fabric performance when garment becomes soiled with dirt,greases, oils, etc.• If contaminants cannot be removed after laundering, it is best to discontinueuse of garment.
Sizing Chart
3 WWW.THINKNSA.COM 800.553.0672 [email protected] 9/7/21