CUSTOMIZED MACHINING

PFP

T E C H N I C A L S H E E TNIMET-PFP-TS-2021

2

On request NIMET can perform customized cutting and machining according to drawing. NIMET works with the latest technology and our CNC machines can perform high quality turning, milling, threading and drilling.

CUSTOMIZEDMACHINING

3

CUSTOMIZEDMACHINING

PFP

Crosswise groove

End for mount with clevis clamp

Outside diameter thread

Tapped or drilled holes radially through shaft

Radial drilling holes, boreded

Grooves for snap ring

Reduced diameter with/without feather keyway

Axial drilled and threaded ends

Reduced diameter with threaded ends

NIMAX - BARSNICRO - BARSNI - LINEAR SHAFTS

4

CUSTOMIZEDMACHINING

PFPNIMAX - TUBESNICRO - TUBESNI - HOLLOW SHAFTS

PRECISION CUSTOMIZED PARTS machined according with customer’s drawings: turning, chamfers, inner/outer radius, inner/outer threads, axial/radial holes,

inner/outer grooves for seals.

5

STORAGE AND HANDLING RECOMMENDATIONS

Keep the products stored in dry and covered spaces.

Direct contact with the floor and steel supports that are not lined with soft materials must be

avoided; preferable to use rubber or wood lined supports.

Always lift the bundles using textile slings. Do not use metal slings during handling of

bundles.

Do not expose the bars or tubes for a long time to the sunlight or to very low temperatures.

Whenever possible, please use the crane to load or unload the bundles; when using the fork lift

please avoid the direct contact of the forks with the products.

Always keep dry the cardboard tubes that protect the chromed products.

CUSTOMIZEDMACHINING

PFP

textileslings

metalslings

NIMET SRL

Targului Street 103, 137121 / Lazuri (DB) / RomaniaPhone: +40 245 607 000 / Fax: +40 245 607 001 / office@nimet.ro

NIMET.RO