customizable high density data center enclosures
TRANSCRIPT
SYNAPTIXserver & storage enclosures
• Multi-vendor platform supports Dell, HP, IBM, Cisco
and most other equipment manufacturers
• Rugged 2000lbs weight capacity
• UBC Zone 4 Compliant
• 180 degree door hinges
• True 24" wide footprint eliminates floor creep
• Heavy duty 12 guage 0.375 square hole mounting angles
are fully adjustable front to rear
• Zero footprint 2-piece flush side panel construction
• Optimized for use with all NetIG connectivity products
The Synaptix II cabinet is designed tomount hardware solutions from multiplemanufacturers and intelligently connectthem to power, networks, and manage-ment solutions. These features are inte-grated into the design assuring “built in”cable management.
Our strong, fully-welded frame and wideselection of accessories and coolingoptions makes for the ideal cabinet in anydata center. It is available in differentdimensions and can be customized tomeet your exacting requirements.
The Synaptix cabinet’s offset VerticalMounting Angle (VMA) system deliversease of hardware installation by ensuringthat power and network cables areinstalled with one length on the horizon-tal plane. Minimizing vertical routing ofpatch cords reduces cabling clutter
KEY FEATURES:
Synaptix II offers the perfect balance of form andfunction. Utilizing a fully perforated front door withlow profile handle, Synaptix II offers an aestheticallypleasing, functional enclosure while exceeding thirdparty open air ventilation requirements of equipmentmanufacturers.
Split rear doors, utilizing 180 degree hinges, allowunobstructed access to equipment reducing aisleblockage without removing the doors.
21249 72nd Avenue South,Kent,WA 98032 t: 425.291.4200 www.net-ig.com
allows for maximum airflow. Access to thevertical patch panels, power distributionunits, and computer hardware is unob-structed due to the offset VMA system andthe extra depth of our cabinet.
In addition, having 3 extra Rack MountingSpaces and two multimedia cable cutoutsin the VMAs turns a 44u cabinet into a 47ucabinet without increasing the width oreven more importantly, without addingextra cost.
Incorporating other design concepts suchas zero clearance two piece removableside panels, multiple cable egress points,180 degree door hinges and the ability tocontrol air flow, as well as proactivelyextract heat addresses the data centermanager’s challenges in today’s dynamiccomputing environments.
NetIG-SynaptixDS1 4/30/09 3:14 PM Page 1
DESIGN FEATURESSMART OFFSET MOUNTING ANGLES WITH RACK UNIT IDEN-TIFICATION MARKINGS -offset design provides ample spaceon one side of the rack for power, cabling, vertical patch pan-els and Centerline. Also, the front angle allows additional 19” 1Uequipment to be mounted vertically. Rack Unit markings includesimplifying alignment during equipment installation and aid inlocating, logging and tracking equipment within an enclosure.
VERTICAL PATCH PANEL & INTEGRATED POWER - The rearchannel accommodates up to four 1.75” wide vertical Power Dis-tribution Units (PDUs) and a Centerline column. We have brack-ets to accommodate most major manufacturer’s PDUs. Cou-pled with the “built in” vertical rack mounting spaces we allowfor all cables to horizontally connected.
2Cool Air Extraction Unit Kit -mounts directly to the top of theSynaptix frame and includes variable speed fans. Fan speeds areadjusted based on user defined temperature thresholds to main-tain temperature within the cabinet. Fans are 10” dia. (-48VDC)producing 600-800CFM ea. Kit also includes solid top panel. Sol-id rear doors and side panels with gasketing required for prop-er airflow.
FRONT DOOR ADJUSTABLE TFT DRAWER SLOT - Optionaladjustable slot in door provides user access to a TFT or LCDscreen display drawer without opening the door. Great for localmaintenance preventing unauthorized access to hardware whichcan cause accidental service disruption.
SELF-CONTAINED LIFT-OFF HINGES -eliminate loose pinswhich are often lost and speeds removal and replacement ofdoors on enclosure. The unique, secure design only allowsremoval of the door from the enclosure when the door is open,preventing unwanted access.
SPLIT REAR DOOR W/180 DEGREE SWING - provides fullaccess to interior of enclosure without removing the door, sim-plifying and expediting equipment loading and maintenancewhile reducing aisle blockage. Doors include 3-point latchingwith swing handle and mechanical key lock.
Vertical Lacing Bars are black w/slots & holes.
Specifications/Ordering Information
Frame Assemblies -42U (73.5” Panel Space) - 2Cool Ready
Part Number125902-01A125902-02A125901-01A125901-02A
MaximumRail Spacing
30.32”30.32”36.32”36.32”
OverallHeight80.50”80.50”80.50”80.50”
OverallWidth24.00”24.00”24.00”24.00”
OverallDepth42.00”42.00”48.00”48.00”
PerforatedTop Panel
YESYESYESYES
TFT DoorSlotYESNOYESNO
Part Number125825-01A125825-02A125825-03A125825-04A
MaximumRail Spacing
36.32”36.32”36.32”36.32”
OverallHeight84.00”84.00”84.00”84.00”
OverallWidth24.00”24.00”24.00”24.00”
OverallDepth48.00”48.00”48.00”48.00”
PerforatedTop Panel
YESYESNONO
TFT DoorSlotYESNOYESNO
Frame Assemblies -44U (77.0” Panel Space) - 2Cool Ready
Part Number125900-01A125900-02A125900-03A125900-04A
MaximumRail Spacing
36.32”36.32”36.32”36.32”
OverallHeight89.00”89.00”89.00”89.00”
OverallWidth24.00”24.00”24.00”24.00”
OverallDepth48.00”48.00”48.00”48.00”
PerforatedTop Panel
YESYESNONO
TFT DoorSlotYESNOYESNO
Frame Assemblies -47U (82.25” Panel Space) - 2Cool Ready
Frame Assemblies include: -heavy duty, fully welded frame - split rear perf doors with 3 point lock - side panels ordered separately -2 pair 0.375 square hole mounting angles - perforated top panel option - color is black -full perf front door with lock (with or without - rack-unit identification labels out TFT slot) - casters and levelers
Part Number125902-430A125901-430A125825-430A125900-430A
Frame Size42Ux42”42Ux48”44Ux48”47Ux48”
Type2-Piece Flush2-Piece Flush2-Piece Flush2-Piece Flush
Side Panels
-each part number covers 1 side of frame-side panels are locking-ship installed when ordered with cabinet
2Cool Air Extraction Unit Kits Part Number125902-900A125901-900A125825-900A125900-900A
Height42Ux42”42Ux48”44Ux48”47Ux48”
Kit includes fan hood assembly, solid top panel & interior baffles. 2Cool Air Extraction KitsrequireFrame Size 125902-900A gasketed solid split rear door kits to ensure proper 42U x42” 125901-900A airflow. Order Part Number 125901-500A (42U), 42U x 48” 125825-900A 125825-500A (44U) or 125900-500A (47U) separately.
Tooless Filler Panels Part Number125606-1A125606-25A
Height1U (1.75”) x 19”
25U Panel Kit x 19”
125606-25A includes:(3)- 1U panels(3) - 2U panels (2) - 4U panels (1)- 8U panelPainted Black Finish
Lacing Bars - 3.5”WPart Number125901-91A125825-91A125900-91A
Height42U (73.50”)44U (77.00”)47U (82.25”)
Part NumberFS1V-1924-2SS2V-1924-2SS3V-1924-2
MountingStyle
19” Fixed19” Sliding19” Sliding
UsableDepth
24”24”30”
Required MtgAngle Spacing
24” to 34”24” to 34”28” to 34”
Load Rating200 lbs.100 lbs.300 lbs.
Shelves - 19” Rack-mount
All shelves are 4 post mounted and painted black. Sliding shelf shown.
Uni-Strut Lacing Bars Part Number125901-425A125825-425A125900-425A
Height42U (73.50”)44U (77.00”)47U (82.25”)
Hardware Part NumberS1B-1032-50CN12-1032-50CN-TOOL
Description[50] #10-32X5/8” Screws[50] #10-32X5/8” Cage NutsCage Nut Installation Tool
Vertical Lacing Bars are black w/slots & holes.
21249 72nd Avenue South,Kent,WA 98032 t: 425.291.4200 www.net-ig.com
SYNAPTIXserver & storage enclosures
NetIG-SynaptixDS1 4/30/09 3:14 PM Page 2