custom roller shade installation instructions
TRANSCRIPT
-
Custom Roller Shades
Read all installation instructions
before installing.
Care and cleaning
Using a soft cloth or sponge, dab with a mild soap and water solution. Do NOT use abrasive or harsh cleansers; they can damage the surface finish. Dry with a cloth towel to prevent water spots.
Operate the roller shade
Pull gently on the chain in one direction to lower the shade; pull in the other direction to raise the shade.
Before you begin your installation:
Read all installation instructions before you begin! Makesurethatyouhavealltoolsandhardware
needed for installation. Checktheinstallationsurface(wall,ceiling,or
window frame) to ensure that you have suitable fasteners and tools for the material.
Double-checkthewidthoftheshade.Ifyouareinstalling several shades, be sure to match them with the appropriate window.
Checkthepartslisttoconfirmthatyouhavethecorrectnumberofbrackets.
Donotremovethewrapontherolleruntilyouhavecompleted the installation. Leaving the shade rolled up completely will ease installation and reduce the riskofdamage.
Forstandardrollershades,thefabricwillhangofftheBACKoftheshade,closesttothewindow.Foroptional reverse roller shades, the fabric will hang off the front of the shade. Be sure to note this when installingthemountingbrackets.
Roller Tube
Key Parts
ControlChain
Spring Plunger Assembly Optional Standard Valance Assembly(notonallmodels)
Spring Plunger EndBracket
ControlEnd Assembly and Bracket
ChainTensioner
Weight Bar
Tools you may need (not included)The tools you will need for installing your blinds will vary, depending on the installation surface, andmountingbrackettype.Tools typically used for installation include:
Drill with Bits
Spirit Level
1/4 NutdriverFlat-bladeorPhillipsScrewdriver
Tape Measure
Pencil
Roller shade mounting brackets
Mounting brackets
Alignment notch
Drywall Anchors
Thank you for making Levolor
a part of your home. You have
chosen the finest roller shades
available, backed by the world
renowned Levolor name.
Learn more about Levolor
and discover a resource of
information, ideas, and support
at www.levolor.com.
1816109
Additional Parts and Services Purchasing extra or replacement parts Should the need arise, you may have your Levolor shades
repaired or restrung through our repair center. Please contact Levolor customer service through www.levolor.com for a return authorization number.
Contacting UsTo contact Levolor customer service regarding any questions or concerns you may have about your new shades, you may reach us at:
1-800-LEVOLOR (9:00 am 6:00 pm EST)
www.levolor.com
NOTE: See step 4 for cassette valance mountingbrackets.
DANGER STRANGULATION HAZARD
Keepcordsoutofthereachofchildren.
RemovecordfromchildsneckCall911orEmergencyCenterClearthroatCheckbreathingandheartbeatBeginCPR
EMERGENCY FIRST AID FOR STRANGULATION.
+
Movecribsandfurnitureawayfrom cords.
Removeobjectsbelow windows.
Loopswillappearwhentheshade is in the raised position.
Donottiecordstogether.
Installacordtensioneror cord cleat.
11R438_Levolor_Manual_Roller_Shades.indd 1 11/8/11 11:53 AM
-
Install outside mount valances (for models without returns)
6B
Install the brackets outside mount
2A Alignthenotchoneachbracketwiththemarksfrom
Step1,makingsuretheyaresquareandlevel. IMPORTANT: Be sure to note the correct location of eachbracket;thebracketsarenotinterchangeable.
Markthebracketmountingholelocations(use of the slotted holes is recommended), two screws perbracket.
Attachthebracketstothewallorwindowframeusing suitable fasteners.
Mark the bracket locations
Carefullymeasurethelengthoftheshadefromthe flat surface of the control end to the base of the small pin on the spring plunger end. Deduct off approximately 1/4" to ensure proper tensioning of therollerinthebrackets.
Makesurethatthereisenoughclearancefortherolled up shade and that it will not rub or catch on the window, window frame or any obstructions when fully rolled up.
Markthisdistanceonthemountingsurfaceatthedesiredbracketheightsothatitiscenteredinthewindow opening.
1
Mark
Screws(2perbracket)
Spring Plunger EndBracket
Example:Installationondrywallusingtheincludedscrewsanddrywallanchors(notincluded).
Attach the tension device (chain control only)
7
Outside mount
Insidemount
NOTE:Thisstepisforinside-mountinstallationsusing a standard valance ONLY. Marktheinsidesurfaceofthevalancetopinthe
same way as described in Step 1 for inside mount. Alignthenotchoneachbracketwiththemarks,
makingsuretheyaresquareandequallyspacedfrom the front of the valance. IMPORTANT: Be sure to note the correct location of eachbracket;thebracketsarenotinterchangeable.
Markthebracketmountingholelocations(useoftheslottedholesinthebracketsisrecommended).
Carefullydrillathrough-holeinthevalancetopateachmarkedbracketholelocation.
Prepare the standard valance for inside-mount installations
3A
Install the brackets inside mount
3B Alignthenotchoneachbracketwiththemarks,
fromStep1makingsuretheyaresquareandspacedequally from the window.
IMPORTANT: Be sure to note the correct location of eachbracket;thebracketsarenotinterchangeable.
Markthebracketmountingholelocations(useoftheslottedholesisrecommended),twoscrewsperbracket.
Attachthebracketstothewallorwindowframe usingsuitablefasteners.Ifyouareinstallingavalance,installitbetweenthebracketsandthemounting surfaceusingthethrough-holesdrilledinStep3A.
Proceed to Step 5.
NOTE:Thisstepisforoutside-mountinstallationsusinga standard valance ONLY. Installthevalancemountingbrackets,spacingthe
bracketsapproximately3"infromtheshadebracketsandmakingsuretheyarelevel.Anyadditional bracketsshouldbespacedevenlybetweentheends.
Makesuretherewillbesufficientclearancebetween the roller shade and the valance.
Proceed to Step 5.
Install the valance brackets for outside-mount installations
2B Install outside mount valances (not for all models)
Centeringthevalanceovertherollershade,slidethe top of the front valance panel into the valance clipsuntilitlocksintoplace.Youcanadjustthevalance spacing from the wall by loosening the wingnutsonthevalancebrackets.
6A
Mark
Mark
Shade Width
ShadeWidth-1/4"
ShadeWidth-1/4"
Through-holes(2perbracket)
ControlEndBracket
Screws(2perbracket)
Spring Plunger EndBracket
Control End Bracket
Valance (optional)
Valance Bracket
Ifyourvalancedoesnotincludereturns,skipto6B.
Attachingthevalancetothevalancebrackets:
Small pin
Foroutsidemountstandardvalances,go to step 6.Otherwise go to step 7.
Example:Installationonawoodwindowframeusingtheincluded screws and optional valance.
Install the roller shade on the brackets
5 Insertthepinonspringplunger
intotheholeonthebracketandpresstheshadeintothebracket,depressing the plunger.
AligntheT-shapedholesinthecontrol-endbracketwith the tabs on the control end of the roller and the hookpointingdown,asshown.Pressdowntolockthecenterhookintoplace.
Ifyourrollershadeincludesbracketcovercaps,pressthemontothebracketsasshownbelow.
Specialtyoptionforoutsidemountshadeschosen at time of purchase.
Removetheshippingwrapperfromthearoundthe roller.
Cap
Foroutsidemountinstallations,gotostep2A. Forinsidemountinstallations,gotostep3A.Forcassettevalanceinstallations,gotostep4.
Refer to instructions in the hold-downtensiondevice.
Special instructions for installing the roller shade headrail on cassette valance brackets
4A
CASSETTE120 Positiontheheadrailwiththeback
panelrestingonbothbottomhooksofallbrackets.
Pushthefrontoftheheadrailfirmlyupwards and toward the window until the groove at the top of the headrail snaps into place.
CASSETTE80 Positiontheheadrailwiththefront
panel resting on the top lip of all brackets.
Pushthebottomfrontoftheheadrailfirmlybackwardsandtowardthewindow until the lip on the rear of theheadrailengagesthebracket and snaps into place.
NOTE:Cassettevalancesizeis determined by shade size.
Special instructions for cassette valances
4Mountthebracketstothewallorwindowframe,withtheoutsidebracketsnofurtherthan2inches(50mm)from the ends of the headrail. On wide shades, space theadditionalbracket(s)atequalintervals.
CASSETTE120OutsideMount Locatetherearbracketholes. Makesurethereleasetabisalwaysmounted
on the top. Proceedtostep4A.
CASSETTE80OutsideMount Locatetherearbracketholes. Makesurethereleasetabisalwaysmountedon
the bottom. Proceedtostep4A.
CASSETTE120InsideMount Locatethetopbracketholes. Makesurethereleasetabisalwaysmountedon
the top. Proceedtostep4A.
CASSETTE80InsideMount Locatethetopbracketholes. Makesurethereleasetabisalwaysmountedon
the bottom. Proceedtostep4A.
NOTE:Bracketisdeterminedbyshadesize.
Release Tab
Release Tab
Release Tab
Release Tab
Removethetapefromthefabriconthebackofthevalanceandmakesurethefabricextendsequallyoneither end of the valance.
Slidethecornerclipontoareturnpanel.Thetabwillfitintothechannelsonthebackofthereturnpanel.
Slidetheassembledreturnpanelontooneendofthe valance. The tab will fit into the channels on the backofthevalance,andthevalancetopwillfitintothe channel on the top of the return panel.
Wrapthefabricaroundtheendofthereturnpanel. Pressthecapsintoplace. Repeatfortheotherend.Oncebothreturnsare
installed,pullthefabrictauttoremovewrinklesandsecuretothebacksofthereturnswithmaskingtape.
For valances with wraparound returns:
Return Panel
CornerClipCap
FabricWrap
11R438_Levolor_Manual_Roller_Shades.indd 2 11/8/11 11:53 AM
-
Lea todas las instrucciones. Asegresedetenertodaslasherramientasylos
aditamentos necesarios para la instalacin. Reviselasuperficiedeinstalacin(pared,techo
omarcodelaventana)yasegresedetenerlos sujetadoresylasherramientasquenecesitepara el material.
Controledosveceselanchodelapersiana.Siva ainstalarvariaspersianas,asegresedeque combinen con la ventana apropiada.
Reviselalistadepiezasyasegresedequeestn todos los soportes.
Noquitelaenvolturadelrodillohastaquehaya finalizadolainstalacin.Dejarlapersianaenrollada completamente facilitar la instalacin y reducir elriesgodequestasedae.
Enpersianasenrollablesestndar,latelacuelga delaPARTEPOSTERIORdelapersiana,loms cerca posible de la ventana. En las persianas con enrrollado opuesto opcional, la tela colgar de lapartefrontaldelapersiana.Asegresede tener en cuenta esto cuando instale los soportes demontaje.
Piezas y servicios adicionales Para adquirir piezas extra o de repuesto Si surgiera la necesidad, puede hacer reparar o volver a hilar sus
persianasLevoloratravsdenuestrocentrodereparaciones.ContcteseconelserviciodeatencinalclientedeLevolorenla direccin www.levolor.comparaobtenerunnmerodeautorizacin de devolucin.
Para contactarnosPara contactar el servicio de atencin al cliente de Levolor en relacin a cualquier consulta o pregunta sobre sus nuevas persianas, comunquese con nosotros al:
1-800-LEVOLOR (9:00 am 6:00 pm EST)www.levolor.com
Antes de iniciar la instalacin, lea todas
las instrucciones.
1816109
PersianasenrollablespersonalizadasGracias por hacer que Levolor
forme parte de su hogar. Ha
elegido la persiana enrollable
ms delicada, respaldada por
el nombre de Levolor, que es
reconocido en todo el mundo.
Obtenga ms informacin sobre
Levolor y descubra una fuente
de informacin, ideas y asistencia
en www.levolor.com.
Cuidado y limpieza
Utilizandounpaosuaveounaesponja,limpieconunasolucindeaguayjabnsuave.NOutilicelimpiadoresabrasivosnifuertes,yaquepuedendaarelacabadodelasuperficie.Squelaconunatoallapara evitar que queden manchas de agua.
Haga funcionar la persiana enrollable
Tire suavemente delcordn en una direccinparabajarlapersiana;tirea en la direccincontraria para subirla.
Antes de comenzar la instalacin:
Tubo paraenrrollar
Piezas clave
Cadenade control
Ensamblado delmboloderesorte Ensamblado de cenefa estndaropcional(noentodoslosmodelos)
Soporte demontajedelmboloderesorte
Ensambla-dodel extremode controly soporte
Tensorde cadena
Barra de peso
Herramientas necesarias(no incluidas)Las herramientas que necesitar para instalarlaspersianaspuedenvariarsegnlasuperficiedeinstalacinyeltipodesoportedemontaje.Las herramientas que generalmente se utilizan pararealizar la instalacin son:
Taladro con brocas
Niveldeburbujade aire
Destornillador paratuercas de 1/4 de
pulgada
Destornillador planoo Phillips
Cintamtrica
Lpiz
Soportes de montaje de la persiana enrollable
Soportesdemontajeestndar
Muescadealineacin
Anclas de expansin parapanel de yesov
NOTA: Para cenefas tipo alero y soportes, siga con el paso 4.
Mantengaloscordonesfueradel alcance de los nios.
RetireelcordndelcuellodelnioLlameal911oaunCentrode emergenciasDespejelagargantaControlelarespiracinyloslatidos cardacosComienceconRCP
PRIMEROS AUXILIOS DE EMERGENCIA EN CASO DE ESTRANGULACIN.
+
Coloquelascunasydemsmuebleslejosdeloscordones.
Retirelosobjetosdedebajodelas ventanas.
Secrearnbuclescuandolaper-sianaseencuentreenlaposicinelevada.
Noateloscordones.
Instaleuntensordecordnounsoporteparacordn.
PELIGRO RIESGO DE ESTRANGULACIN
11R438_Levolor_Manual_Roller_Shades.indd 3 11/8/11 11:53 AM
-
NOTA: Este paso es slo para instalaciones interioresenlasqueutilizarSOLAMENTEunacenefaestndar. Marquelasuperficieinteriordelapartesuperior
de la cenefa de la misma forma que en el paso 1, para realizar una instalacin interior.
Alineelamuescadecadasoporteconlasmarcas yasegresedequeestnaescuadrayespaciados enformaparejadesdelapartefrontaldelacenefa. IMPORTANTE:Asegresedetenerencuenta la ubicacin correcta de cada soprote; los soportes no son intercambiables.
Marquelasubicacionesdelosagujerosdemontaje delossoportes(serecomiendautilizarlosagujeros ranurados de los soportes).
Realiceconcuidadounagujeroguaenlaparte superior de la cenefa en cada ubicacin marcada delosagujerosdelossoportes.
Midaconcuidadoellargodelapersiana,desde la superficie plana del extremo de contral hasta labasedelapequeaclavijadelextremodel mboloderesorte.Resteaproximadamente1/4" paraasegurarsedequeelrodilloest correctamente tensionado en los soportes.
Asegresedequehayasuficienteespaciopara lapersianaenrolladaydequestanorocela ventana ni se atasque en ella ni en su marco, y de quenohayaobstruccionescuandolapersianaesttotalmente enrollada.
Marqueladistanciaenlasuperficiedemontaje a la altura deseada del soporte, a fin de que quede centrada en la abertura de la ventana.
Instale las abrazaderas de la cenefa en cascadas
4Montelasabrazaderasenlaparedomarcodelaventana,con las abrazaderas exteriores a una distancia no mayor de5,08cm(50,08mm)desdelosextremosdelcortinero.Enlaspersianasanchas,separela(s)abrazadera(s)adicional(es)enintervalosiguales.
Cascadas120Montajeexterior Ubiquelosorificiosposterioresdelasabrazaderas. Asegresedequelalengetadeliberacinest
siempre montada en la parte superior. Contineconelpaso4A.
Cascadas 80.Montajeexterior Ubiquelosorificiosposterioresdelasabrazaderas. Asegresedequelalengetadeliberacinest
siempre montada en la parte inferior. Contineconelpaso4A.
Cascadas120.Montajeinterior Ubiquelosorificiossuperioresdelasabrazaderas. Asegresedequelalengetadeliberacinest
siempre montada en la parte superior. Contineconelpaso4A.
Cascadas80.Montajeinterior Ubiquelosorificiossuperioresdelasabrazaderas. Asegresedequelalengetadeliberacinest
siempre montada en la parte inferior. Contineconelpaso4A.
NOTA:Laabrazaderasedeterminaenbasealtamaode la persiana.
Lengetadeliberacin
Lengetadeliberacin
Lengetadeliberacin
Lengetadeliberacin
Instale el cortinero de la persiana en rollo en las abrazaderas de la cenefa en cascadas
4A
Cascadas120 Coloqueelcortineroconelpanel
posterior de modo que quede en ambos ganchos inferiores de las abrazaderas.
Presionelapartefrontaldelcortinero firmemente hacia arriba y hacia la ventana hasta que la ranura en la parte superior del cortinero calce en su lugar.
Cascadas80 Coloqueelcortineroconelpanel
frontal de modo que quede en el reborde superior de las abrazaderas.
Presionelaparteinferiorfrontaldelcortinero firmemente hacia atrs y hacia la ventana hasta que el reborde en la parte posterior del cortineroseajusteenlaabrazaderay calce en su lugar.
NOTA: La cenefa en cascadas se determina en base altamaodelapersiana
Marque las ubicacionesde los soportes
1
MarcaInstalacinexterior
Instalacininterior
Marca
Marca
Ancho de lapersiana
Ancho de la persiana: 1/4"
Ancho de la persiana: 1/4"
Clavijapequea
Paracenefasestndardeinstalacinexterior,sigaconelpaso2A.Parainstalacionesinterioresestndar,sigaconelpaso3A.Paracenefastipoaleroysoportes,sigaconelpaso4.
Instale los soportespara la instalacin exterior
2A
Tornillos(2por soporte)
Soportedemontajedelmboloderesorte
Example:Installationondrywallusingtheincludedscrewsanddrywallanchors(notincluded).
Soportes paraextremo de control
Alineelamuescadecadasoporteconlasmarcas realizadasenelpaso1yasegresedequeestn a escuadra y a nivel. IMPORTANTE:Asegresedetenerencuenta la ubicacin correcta de cada soprote; los soportes no son intercambiables.
Marquelasubicacionesdelosagujerosdemontaje delossoportes(serecomiendautilizarlosagujeros ranurados); dos tornillos por soporte.
Fijelossoportesenlaparedoenelmarcodela ventanautilizandolossujetadorescorrectos.
NOTA: Este paso es slo para instalaciones exterioresenlasqueutilizarSOLAMENTEunacenefaestndar. Instalelossoportesdemontajedelacenefa,
espaciandolossoportesaproximadamentea3" desdelossoportesdelapersiana,yasegresedequeestnanivel.Lossoportesadicionalesdebenestarespaciadosenformaparejaentrelosextremos.
Asegresedequehayasuficienteespacioentrelapersiana enrollable y la cenefa.
Contineconelpaso5.
Instale los soportes de la cenefa para instalacin exterior
2B
Soporte de lacenefa
Prepare la cenefa parala instalacin interior
3A
Instale los soportes parala instalacin interior
3B Alineelamuescadecadasoporteconlasmarcas
realizadasenelpaso1yasegresedequeestn aescuadrayanivel,enformaparejadesdelaventana.
IMPORTANTE:Asegresedetenerencuentala ubicacin correcta de cada soporte; los soportes no son intercambiables.
Marquelasubicacionesdelosagujerosdemontaje delossoportes(serecomiendautilizarlosagujeros ranurados); dos tornillos por soporte.
Fijelossoportesenlaparedoenelmarcodela ventanautilizandolossujetadorescorrectos.Siva a instalar una cenefa, instlela entre los soportes ylasupericiedemontaje,utilizandolosagujeros guarealizadosenelpaso3A.
Contineconelpaso5.
Agujerosgua(2porsoporte)
Tornillos(2porsoporte)
Soportedemontajedelmboloderesorte
Soportesparaextremode control
Ejemplo:Instalacinenunmarcodemaderaconlostornillosproporcionados e instalacin de cenefa opcional.
Cenefa(opcional)
Paracenefastipoalero,sigaconelpaso6.Paracenefasestndardeinstalacinexterior,siga con el paso 7.
Instale la persiana enrollablesobre los soportes
5
Insertelaclavijaenelmbolo deresorte,enelagujeroque estenelsoporteyencajela cortina en el soporte, oprimiendo elmbolo.
Alineelosagujerosenforma de T que estn en el soporte de extremo de control con las lengetasqueestnenel extremo de control del rodillo y con el gancho orientado haciaabajo,comosemuestra. Presione para trabar el gancho central en su lugar.
Silapersianaenrollableincluyetapasparasoportes, presinelos sobre los soportes, como se muestra a continuacin.
Opcindelaespecialidadparamontaje exteriorelegidoenlapocadelacompra.
Extraigalaenvolturadeenvodelrodillo.
Tapa
Instale las cenefas de instalacin exterior (no para todos los modelos)
6ASilacenefanoincluyelosretornos,pasea6B.Para cenefas con retornos envolvente: Extraigalacintadelatelaqueestenlaparte
posteriordelacenefayasegresedequelatela seextiendaenformaparejasobrecadaextremo de la cenefa.
Deslicelaprensaesquineraenelpaneldelretorno. Lalengetaencajarenloscanalesqueestnenla parte posterior del panel del retorno.
Desliceelpaneldelretornoensambladosobreun extremodelacenefa.Lalengetaencajarenlos canales que estn en la parte posterior de la cenefa, ylapartesuperiordelacenefaencajarenelcanal que est en la parte superior del panel del retorno.
Envuelvalatelaenelextremodelpaneldelretorno. Presionelastapasensulugar. Repitaesteprocedimientoparaelotroextremo.
Una vez que ambos retornos estn instalados, tire de la tela hasta que quede tirante para eliminar las arrugasyparafijarlaparteposteriordelosretornos con cinta adhesiva de papel.
Instale las cenefas de instalacin exterior (para los modelos sin retornos)
6B
Centrelacenefasobrelapersianaenrollable y deslice la parte superior del panel frontal de la cenefa en las prensas de la cenefa, hasta queencajenensulugar.Puedeajustarel espaciadodelacenefadesdelaparedaflojandolas tuercas mariposa que de los soportes de la cenefa.
Cmofijarlacenefaenlossoportesdemontaje:
Return Panel
CornerClipCap
FabricWrap
Conecte el dispositivo de tensin (slo control del cadena)
7
Consultelasinstruccionessobre el dispositivo para mantener la tensin.
11R438_Levolor_Manual_Roller_Shades.indd 4 11/8/11 11:53 AM