custom lockset division: design from the inside out levers, … · 2020. 2. 19. · custom lockset...
TRANSCRIPT
Custom Lockset Division: Design from the Inside Out Levers, Knobs & Escutcheons
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
MARKS CUSTOM LOCKSET DIVISIONMarks USA Custom Lockset Division product is manufactured with the quality engineered mechanical locksets that carry our Lifetime Mechanical Warranty. These products are non-stocked due to the large array of both designs and finishes and thus require longer lead times and minimum order quantities. This catalogue is only a sampling of the designs that can be supplied. Standard mortise & tubular lock trim are usually stocked and are available in normal lead times.
Lifetime Mechanical Limited WarrantyMARKS USA warrants that its products are free from defects in materials and workmanship. This warranty is limited to the lifetime of the door on which our lock is installed. In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-MARKS products or parts. We reserve the right to make changes in materials, components or manufacturing methods. Liability under all warranties expressed or implied is limited to replacement of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages. Additionally, the company will not warrant ANSI A156.2 Grade 2 lever product installed in educational facilities and student housing.
Because common pin tumbler cylinders may be compromised by picking, drilling or key bumping, for applications where greater security is required, we created Marks USA HI-SECURITY™, constructed with multiple pin planes and sidebars, that are drill-, pick- and bump-resistant.
Table of Contents
Stainless Steel Cast Levers ................................................................................................2-14
Stainless Steel Tubular Levers..........................................................................................15-19
Standard Mortise & Tubular Lock Trim & Rose Styles ........................................................... 20
Custom Forged Brass Levers ................................................................................................ 21
Turnpieces ............................................................................................................................ 22
Custom Forged Brass Trim ................................................................................................... 23
Custom Escutcheon Plates ..............................................................................................24-26
Additional Custom Designs .............................................................................................27-28
ArchiTech™ Designer Wireless Access Control ..................................................................... 29
HI-SECURITY
5-1/2"
2-3/8"
4-7/16"
2-3/8"
5-9/16"
2-5/8"
5-5/16"
2-3/4"
SF003
SF005 SF006
SF004
5-1/8"
2-9/16"
4-23/32"
2-7/16"
SF001 SF002
5"
3-1/16"
5-5/16"
2-3/16"
SF007 SF008
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
4-11/16"
2-1/2"
SF009
5-1/8"
2-13/16"
SF010
5-15/16"
2-13/16"
SF011
4-5/8"
2-1/2"
SF012
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 2
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:12 AM Page 2
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 2
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 3
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
4-13/16"
2-5/8"
SF014
4-1/2"
2-5/8"
SF013
4-3/16"
2-3/4"
SF015 SF016
5-1/8"
2-13/16"
SF018
4-15/16"
2-15/16"
SF017
5-11/16"
2-13/16"
SF019 SF020
5-1/2"
2-5/8"
5-5/16"
2-5/8"
5-5/16"
2-15/16"
SF021 SF022
5-5/16"
2-13/16"
SF023
5-5/16"
2-5/8"
SF024
4-13/16"
2-11/16"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:12 AM Page 3
3www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 4
5"
2-23/32"
SF026
5"
2-15/16"
SF029
5-1/16"
2-1/2"
SF0314-3/4"
2-23/32"
SF030
5-1/8"
2-23/32"
SF032
5-5/16"
2-15/16"
SF033
5-5/8"
2-13/16"
SF034
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5-5/16"2-23/32"
SF035A
5-5/16"
2-13/16"
SF025
5-5/16"
2-15/16"
SF027
5-5/16"
2-23/32"
SF035
5-1/8"2-13/16"
SF036
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:12 AM Page 4
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 4
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5-5/16"2-13/16"
SF037
5-5/16"
2-7/8"
SF038
5-5/16"2-13/16"
SF041
5-11/16"2-13/16"
SF043
5-5/16"2-13/16"
SF037A
5-3/8"
2-13/16"
SF040
5-5/16"
2-13/16"
SF042
5-1/8"
2-1/4"
SF044
SF045
4-5/8"
2-7/16"
SF046
5-1/8"
2-15/16"
SF047
5-5/16"
2-19/64"
SF048
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 5
4-23/32"
2-23/32"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:12 AM Page 5
5www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 6
5-11/16"
2-7/8"
SF057
5-1/8"
2-7/8"
SF058
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5-1/8"
2-3/8"
SF053
5"
2-7/8"
SF056
5-11/16"
2-7/16"
SF054
5"2-3/32"
SF055
5-1/4"
2-5/16"
SF059
4-1/2"2-7/16"
SF060
5-5/32"2-15/16"
SF049
5-1/8"2-5/16"
SF051
4-23/32"
2-13/16"
SF050
5"
2-7/16"
SF061
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:12 AM Page 6
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 6
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5-1/16"
2-3/32"
SF062
4-21/64"
2-3/16"
SF071
5-1/8"
3"
SF067
5-3/16"
3-3/16"
SF0654-7/8"
2-5/8"
SF064
5-1/2"
2-9/16"
SF063
4-15/16"2-7/16"
SF068
4-1/2"2-3/16"
SF070
4-21/64"2-3/16"
SF073
4-21/64"2-9/16"
SF072
5-1/8"
2-3/4"
SF069
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 7
5-1/8"2-1/4"
SF074
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:12 AM Page 7
7www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 8
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
4-15/16"
2-3/4"
SF082
4-7/8"
2-5/16"
SF0844-7/16"
2-1/8"
SF085
5-1/2"2-3/4"
SF086
4-21/64"
2-3/16"
SF075
4-5/8"2-13/16"
SF077
4-3/4"2-15/16"
SF080
4-11/16"2-3/8"
SF076
5-19/32"2-13/16"
SF078
4-27/32"2-3/4"
SF081
5-7/16"2-3/4"
SF083
5-1/2"
2-13/16"
SF087
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 8
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 8
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
SF095
4-23/32"2-7/16"
SF097
SF088
5-1/2"
2-3/16"
SF089
5-5/16"2-11/16"
SF093
5-1/8"2-13/16"
SF091
5-5/16"2-9/16"
SF090
5"2-13/16"
SF092
SF094
SF096
SF098
5-1/16"2-1/16"
5-1/8"2-7/16"
4-7/32"2"
5-9/32"2-3/32"
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 9
5-1/8"2-1/2"
SF099
6"2-11/16"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 9
9www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 10
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5-5/16"2-3/8"
4-11/16"2-1/2"
4-3/8"2-1/2"
5-13/64"2-21/32"
5-3/16"2-3/4"
5-15/16"
2-3/8"
SF101
SF103
SF105
SF107
SF109
SF100
SF102
SF104
4-1/2"2-3/16"
4-1/2"2-3/16"
6-7/64"2-5/8"
SF106
SF108
SF110
4-5/8"2-7/16"
4-9/16"2-5/8"
5-1/2"2-3/16"
SF111
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 10
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 10
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
5-5/16"2-13/16"
5-5/16"2-13/16"
5-1/8"2-7/8"
5-5/16"2-7/8"
5-13/16"2-11/16"
5-5/16"
2-13/16"
4-27/32"
2-7/16"
5-19/32"
2-13/16"
6"
2-13/16"
5-5/16"
2-9/16"
SF113
SF115
SF117
SF119
SF121
SF112
SF114
SF116
SF120
SF122
SF118
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 11
2-5/8"
5-9/32"2-13/16"
SF123
5-1/2"
2-3/16"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 11
11www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 12
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5"
2-5/8"
5-1/8"2-7/16"
5-3/16"2-5/8"
5-5/16"
2-13/16"
5-1/2"
3"2-5/8"
5-5/16"
2-13/16"
5-5/16"
2-13/16"
5-1/8"
2-13/16"
5-5/16"
2-13/16"
4-1/8"
SF125
SF127
SF130
SF132
SF134
SF126
SF128
SF131
SF133
SF135
3"
5-5/16"2-11/16"
5-1/8"2-5/8"
SF136 SF137
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 12
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 12
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 13
4-15/16"2-15/16"
5-15/64"
2-7/16"
5-23/64"
2-1/2"
5-25/64"
2-13/16"
8-1/16"
3-1/16"
5-9/32"
2-13/16"
5-5/64"2-3/4"
4-27/32"
2-15/16"
6-1/2"2-13/16"
SF138
SF140
SF142
SF145
SF147
SF139
SF141
SF144
SF146
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
5"
2-3/4"
SF149 SF150
4-15/16"2-15/16"
5-1/8"2-5/8"
SF148
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 13
13www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 14
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS
SF151
SF153
SF155
SF157
SF160
LH23 LH32
SF161
SF152
SF154
SF156
SF158
5-1/8"2-7/16"
5-3/4"2-23/32"
5-1/2"
2-27/32"
4-21/32"2-7/16"
5-1/2"2-7/16"
5-11/16"
2-23/32"
5-5/32"2-9/16"
5-5/16"
3-3/8"
5-5/16"
2-1/2"
5-1/8"
2-9/16"
5-5/16"
2-1/2"
5"
2"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 14
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 14
STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 15
STAINLESS STEEL TUBULAR LEVERSFOR TUBULAR LOCKSETS
5-1/2"
SD001
5-5/16"
2-13/16"
SD002
5-5/16"
2-13/16"
5-5/16"
2-13/16"
SD002B
SD0045-5/16"
2-15/16"
SD003
5-5/16"
2-13/16"
SD005
4-23/32"
2-7/16"
SD006
2"
5-5/16"
2-13/16"
2-13/16"
SD002A
5-1/2"
2-13/16"
SD007
5-5/16"
2-13/16"
SD008
5-5/16"
2-13/16"
SD009
5-5/16"
2-13/16"
SD010
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 15
15www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
STAINLESS STEEL TUBULAR LEVERSFor Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 16
STAINLESS STEEL TUBULAR LEVERSFOR TUBULAR LOCKSETS
2-7/16"
SD011
5-5/16" 5-5/16"
2-13/16"
SD012
5-1/8"
2-13/16"
5-11/16"
2-13/16"
SD013 SD014
5"
2-13/16"
SD015
5"2-13/16"
SD015A
5-5/16"
2-13/16"
SD018
SD020
5-5/16"2-13/16"
SD019
SD0215-5/16"
2-13/16"
5-5/16"
2-13/16"
5-5/16"
2-13/16"
SD017SD0165-5/16"
2-13/16"
2-7/16"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 16
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 16
STAINLESS STEEL TUBULAR LEVERSFor Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 17
STAINLESS STEEL TUBULAR LEVERSFOR TUBULAR LOCKSETS
2-13/16"
SD022
SD024
SD026
SD028
SD030
SD032
5-1/2"
2-13/16"
5-1/2"
2-5/8"5-5/16"
2-13/16"5-5/16"
2-13/16"5-1/2"
3-1/2"5-1/2"
5-1/2"2-13/16"
SD023
SD025
SD027
SD029
SD031
SD033
5-5/16"2-13/16"
5-5/16"2-13/16"
5-29/32"2-13/16" 2-7/16"
3-11/32"2-7/16" 3-29/32"7-23/32"
2-3/4"
2-13/16"5-25/64"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 17
17www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
STAINLESS STEEL TUBULAR LEVERSFor Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 18
STAINLESS STEEL TUBULAR LEVERSFOR TUBULAR LOCKSETS
SD034 SD0355-5/16"
2-23/32"
5-5/16"
2-7/8"
5-5/16"
2-13/16"
5-5/16"2-13/16"
5-5/16"2-13/16"
5-5/16"2-5/8"
4-15/16"2-5/8"
4-27/32"2-5/8"
5-5/16"2-13/16"
5-13/16"2-13/16"
5-5/16"2-13/16"
5-29/32"3-3/16"
SD038
SD040
SD042
SD046 SD047
SD043
SD039
SD041
SD036 SD037
2-13/16"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 18
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 18
STAINLESS STEEL TUBULAR LEVERSFor Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 19
STAINLESS STEEL TUBULAR LEVERSFOR TUBULAR LOCKSETS
5-5/16"2-1/2"
4-15/16"
3"
5-1/2"
3"
5-1/8"
2-5/8"
5-29/32"2-3/32"
5-1/2"3"
5-5/16"2-13/16"
5-25/64"2-11/16"
5-5/16"2-23/32"
SD051
SD053
SD056
SD058
SD049SD048
SD050
SD052
SD054
SD057
SD062 SD063
SD064
SD066
4-23/32"
2-9/16"
5-3/16"
2-13/16"
5-5/16"
2-23/32"
5-1/2"2-7/8" 2-9/32"
5-5/16"2-11/16"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 19
19www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
STAINLESS STEEL TUBULAR LEVERSFor Tubular Locksets
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 20
STANDARD MORTISE & TUBULAR LOCK TRIM& ROSE STYLES
RROOuuNNDD 1100
RROOSSEE RRRR RROOSSEE RRww RROOSSEE RRSS RROOSSEE RRxx
ppllaazzaa 8822
BBaallll 2200//3300
MMaaDDiiSSOONN 5522
DDaayyttoonn 8833MMOONNaaccOO 5577
ccRREESSccEENNTT 8866TTOOwwNNEE 7722
aaMMEERRiiccaaNN 9922
4"
2-1/2"
7/16"
2-9/16"
2-1/2"
2-1/4"
7/16"
2-9/16"
TTiiTTaaNN 9966
4-1/2"7/16"
2-9/16"
2-7/8"OOMMNNii 7788
4-1/4"7/16"
2-9/16"
2-5/8"
MMaaxxwwEEllll 7777
4-1/4"7/16"
2-9/16"
2"
7/16"
2-9/16" 2-3/16"
3"
1/2"
7/16"
2-9/16"
3"
4-1/2"
4-1/2"7/16"
2-9/16"
2-3/4"
2-1/2"
7/16"
2-9/16"
2-3/4"
1/2"
4-1/2"7/16"
2-9/16"
3-1/8"
4"
2-1/2"
7/16"
2-1/4"
2"
4-1/2"7/16"
2-9/16"
2-3/4"
7/16"
2-9/16"
2"
3-3/4"
2-9/16"
7/16"
2-9/16"
7/16"
2-9/16"
7/16"7/16"
2-1/4"
RROOSSEE RRQQ
7/16"
2-1/4"
EEcclliippSSEE 6600
SSTTaaNNhhOOppEE 55664444
NOTE: Roses are available in a wide variety of finishes
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 20
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 20
STANDARD MORTISE & TUBULAR LOCK TRIM & ROSE STYLES
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 21
CUSTOM FORGED BRASS LEVERS
5321 5601
4-3/4"
2-7/16"
4-3/8"
2-1/2"
4-3/16"
3-15/16"
5671
3-1/2"
2-13/16"
5681
PL-AL
PL-AR
4-1/2"
2-5/16"
5636
4-1/4"
2-5/16"
5678
5"
2-5/16"4-5/8"
2-7/16"
5-5/8"
2-11/16"
5-5/8"
2-11/16"
5348 BA-L
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 21
21www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
CUSTOM FORGED BRASS LEVERS
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 22
TURNPIECES
1-3/4"
1-3/16"
2-5/16"
1-7/16"
OPTION CODE T4Base Metal: Brass & Stainless Steel
OPTION CODE T5Base Metal: Stainless Steel
OPTION CODE T6Base Metal: Stainless Steel
OPTION CODE T3Base Metal: Zinc
OPTION CODE T2Base Metal: Stainless Steel
OPTION CODE T1Base Metal: Brass & Stainless Steel
OPTION CODE T7Base Metal: Brass
OPTION CODE T9Base Metal: Stainless Steel
OPTION CODE T8Base Metal: Stainless Steel
OPTION CODE T16Base Metal: Stainless Steel
15/16"
15/16"
27/32"
1-3/8"
1-5/8"
15/16"
1-1/2"
15/16"
1-3/4"
15/16"
1-15/16"
1-11/16"
1-3/4"
15/16"
1-15/16"
1-11/16"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 22
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 22
TURNPEICES
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 23
CUSTOM FORGED BRASS TRIM
CUSTOM 1
19"
3"
2-1/4"
7-5/8"
4"
8"
CUSTOM 2
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 23
23www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
CUSTOM FORGED BRASS LEVERS
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 24
CUSTOM ESCUTCHEON PLATES
FIGURE 5FIGURE 3
FIGURE 2FIGURE 1
FIGURE 4
17"
3"
17"
3"
19"
2-3/4"
16-7/8"
3"
17"
2"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:13 AM Page 24
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 24
CUSTOM ESCUTCHEON PLATES
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 25
CUSTOM ESCUTCHEON PLATES
FIGURE 10FIGURE 9FIGURE 8
17"
2-3/4"
17"
2" 2"
17"
12"
2-1/2"
FIGURE 6 FIGURE 7
2-3/4"
17"
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:14 AM Page 25
25www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
CUSTOM ESCUTCHEON PLATES
MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 26
CUSTOM ESCUTCHEON PLATES
FIGURE 15
FIGURE 14FIGURE 13
10-1/2"
2-1/2"
9-1/4"
2-1/4"
8"
2-1/2"
8"
2"
8"
2"
8"
2"
FIGURE 11 FIGURE 12
FIGURE 16
Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:14 AM Page 26
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 26
CUSTOM ESCUTCHEON PLATES
53 16
21 2
51 8
27 16
47 16
21 2
51 8
25 16
47 8
29 16
411 16
25 16
412
178
438
11516
5
29 16
5
23 4
27www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
Additional Custom Designs
5322 5641
5637 5647
5691 5690
5679 5697
LH22 WS600
43 16
23 4
13 4
13 8
29 16"
716"
21 16"
27 16"
21516
212
101 4
25 8
81 2
27 16
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 28
Additional Custom Designs
Option Code T15
WP02
9633 9691
W04
5697
(left) Marks USA custom escutcheon plate and lever used throughout the Trump® International Hotel in Washington D.C.
• All Applications and Doors - Cylindrical and Mortise models for wood and metal doors, for new and existing applications, with wireless surface mount or mortised-in electronics and batteries. Surface-Mount or Mortised-in Electronics and Battery Pack
• Customize To Match Any Aesthetic Look, For Every Décor - Over 300 locks, levers, roses and finishes to choose from, durable ANSI/BHMA Grade 1 hardware. Over 300 locks, levers, roses and finishes available in mortise version.
• Future-Proof Multi-Technology Access ID Credentials Replace Cumbersome Keys – HID® Prox, Mag Stripe, Smart Cards, PIV, keyfobs, enabled iLock® App and remote buttons. 5000 Users, 500 Scheduled Events & 40,000 Event Audit Trail
• Emergency Lock-Down option via lock, button, keyfob or server (where networked). (Global Unlock via server too.)
• Proven, Low Maintenance, Wireless Installation And Unsurpassed Battery-Life with Advanced Power- Saver circuit, with years of use in even high-traffic areas, using off-the-shelf AA batteries, 3 year battery life, typ. using advanced Power-Saver circuit.
• Auto-Deadbolt option for automatic keyless locking of deadbolt upon exiting, ideal for residential applications
• Flexible System Programming Locally using a USB Gateway or remotely across a wireless network (using free Alarm Lock DL-WINDOWS Windows- based software) or integrated on an enterprise class IT environment, in realtime, using LENEL
• Networking Choices – Choose 802.11 or Ethernet network, with wireless encrypted bi-directional gateways, in which many locks communicate to a single gateway, expander, or use a wireless RF USB Gateway equivalent. For entry door applications and the like, used in conjunction with strikes and mags, use with Networx NetPanels. Or, use as a single-door control, in real time, as part of the IT-Network environment, with Continental Access CA4K®, Lenel OnGuard® Integrated Access Control & Video Security or Software House Connected Partner Program® Platforms.‡
ArchiTech Networx Features:
MORTISED NETWORX
CONTROL UNIT
PROXIMITY READER
(OVAL AND RECTANGULAR)
DOOR CONTACT MAGNET
(TWO TYPES)
SURFACE-MOUNTED NETWORX
CONTROL UNIT
DOOR CONTACT SENSOR
PROXIMITY READER
(OVAL AND RECTANGULAR)
DOOR CONTACT MAGNET
(TWO TYPES)
SURFACE-MOUNTED NETWORX
CONTROL UNIT DOOR
CONTACT SENSOR
PROXIMITY READER
(OVAL AND RECTANGULAR)
(rear) (front)
DOOR CONTACT MAGNET
(TWO TYPES)
SURFACE-MOUNTED NETWORX
CONTROL UNIT DOOR
CONTACT SENSOR
PROXIMITY READER
(OVAL AND RECTANGULAR) (outside)
(inside)
DOOR CONTACT MAGNET
(TWO TYPES)
Standard Configurations
29www.marksusa.com | 800.645.9445 | Fax: 631.225.6136
Designer Wireless Access Control Standalone, Networked, or Enterprise
ArchiTech™ is the best of both worlds, combining infinite combinations of Marks Custom Lock, Grade 1 styles, hardware choices and architectural finishes, with sister Division Alarm Lock’s Trilogy® Networx™ Lock Wireless Access Control electronics, class-leading for low-maintenance, longest battery life and breadth of line for every door type. Advanced electronics can be concealed within the door, or neatly on back, and are available in cylindrical, mortise, narrow stile and exit trim, matching in look and function, whether the application is standalone PIN/Prox or Multi-Technology ID Card access, networked and controlled from the server, or centrally-managed in realtime, including area-specific or global lockdown in seconds, with enterprise class software solutions with integrated platforms, including Continental CA4K®, Software House® or Lenel®. Easily networked for every building’s construction, Architech Access Locks offer a choice of technologies, Ethernet, WiFi &/or POE Gateways & Extenders, each controlling over 60 locks. And, for every access control client, from multi-dwelling residential to campus, and institutions or corporate security, these keyless access control locks, support a multi-user hierarchy for service staff, users and managers, as well as a vast variety of ID Credentials, including cards, fobs and mobile Smart App.
Plus, for coordinating the look for an entire building, Marks offers identical matching interior tubular locksets for passage, privacy and closets (dummy locksets). Visit Marks’ www.designalock.com website and create, spec and share your own vision.
Concealed electronics
Cylindrical; Surface Mounted Electronics (back box not shown)
Mortise; Surface Mounted Electronics
Mortised-in electronics and batteries
Mag Stripe Reader
Keypad
www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 30
Designer Wireless Access Control Standalone, Networked, or Enterprise
Verizon 12:55 PM 79%
The Key is Your Smartphone & More Secure Technology: Use the iLock® App to unlock your Networx ArchiTech™ Bluetooth® Series Door Lock in seconds!
iLock, the easy smartphone mobile solution for unlocking your Trilogy® ArchiTech Bluetooth Series Designer Access Control Locks from up to 30 feet away with any smart device, without the need to carry cumbersome ID cards or keys. Password protected access is secure through the use of Bluetooth LE® and proprietary encryption. For even greater security users can add an optional passcode, entered on their phone App.
Coming soon: emailable digital eKeys for guests or service temporary access, too.
iLock App is available from both iTunes and the Google Play Store
Networx Configuration Options (multi-technology ID card/credential readers available in multiple shapes & colors)
Wired Gateway POE Gateway 802.11 Gateway
Networx Gateways Options (no Panel or PIM required)1 Networx Gateway controls up to 63 wireless Networx locks (repeaters also available for extending range).
Create your own custom lock looks www.designalock.comCreate, spec & share a custom lock vision for any space or building with www.designalock.com interactive site for trying out various lock looks for locks inside and out. Ideal for Architects, Designers and Building Operating Management who want their access control and locking “look” to be as welcome as the security they provide.
365 Bayview Ave. • Amityville, NY 11701 • USA • 800-645-9445 • Fax: [email protected] • www.marksusa.com
Marks USA is a Division of NAPCO Security Technologies, Inc. (NASDAQ:NSSC): • NAPCO • Alarm Lock • Continental Access • Marks USAArchiTech, Trilogy, Networx and iLock are trademarks of NAPCO Security. Other trademarks listed are properties of their respective companies. Lifetime warranty limited to mechanical lock (excluding finish). See full details Pg 1 &/or at www.marksusa.com
©Marks USA, 2020 A768 (2.20)
ABOUT US: MARKS USA was established in 1977 to serve a growing demand for a mortise lock manufacturing company who would satisfy the needs of an expanding market. Since then, the product line has grown to include residential and commercial locksets to meet and exceed the most stringent UL and BHMA/ANSI specifications. In 1989, the Custom Lockset Division was created to accommodate customers with special requirements of either lock function or design. Custom locksets have been developed for numerous municipal and commercial applications, including those shown.. These are various custom locksets developed to accommodate our customers needs. This is only a sampling of our solutions. We at the Custom Lockset Division welcome the opportunity to respond to special applications requiring a custom engineered lock product. Marks USA makes compliance with the Buy American Act (BAA) and American Recovery & Reinvestment Act (ARRA) easy, as an American manufacturer of quality door hardware products with manufacturing facilities in Long Island, NY.