COST AND PRODUCT REFERENCE GUIDEINSPIRED DRAPES ELEMENTS

CUSTOM FABRIC WINDOW TREATMENTS

UNITED STATESFEBRUARY 2019

2 | swfconnect.com February 2019

Inspired Drapes | 3

Fabric Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5Key for Fabric Style List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Fabric Style List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-11Trim Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-17Size Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20Finishing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-27Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29Size Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31

Cornice Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-36Cornice Options and Size Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Pillows Features and Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

How to Measure for Decorative Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-42How to Measure for Shades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-45How to Measure for Cornices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-48Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49-52

Price Charts: Decorative Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56Price Charts: Fabric Shades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-66Price Charts: Cornices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Price Charts: Pillows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Price Charts: Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Fabric Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-72C.O.M. Yardage Requirements: Fabric Shades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73-74C.O.M. Yardage Requirements: Cornices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-76C.O.M. Yardage Requirements: Pillows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Fabric Features and Considerations

Decorative Panels

Fabric Shades

Cornices and Pillows

Measuring Instructions

Price Charts and Options Pricing

Customer's Own Material (C.O.M.)

Table of Contents

DECORATIVE PANELS, FABRIC SHADES, AND CORNICES

February 2019

4 | swfconnect.com

• Fabric appearance can vary based on lighting and selected liner• Fabric can fade gradually over time; fading can occur at a faster rate if exposed to direct sunlight• Color may vary between dye lots; to ensure color consistency, please order decorative panels, shades, cornices, and/or cut

yardage at the same time• If using contrast lining, it is recommended that the lining color be lighter than the primary fabric to avoid color bleed through

• Stretching and shrinking can occur; amounts will vary depending on climatic conditions• Wrinkling is an inherent characteristic of natural fabrics; please be aware that products may have wrinkling; most wrinkles will

fall out after product is hung; see content label on product for ironing and steaming recommendations• Seamless Roman, relaxed Roman, and balloon pleated style shades have small stitches (used to attach the cord rings), which

may be visible on the front of the shade

• Due to fabric construction and weight variation, restrictions may apply; blackout and thermal liners are restricted on specific fabric and product styles due to weight; see fabric list for details

• Due to the lightweight and occasional open weave construction, all sheers, casements, and laces are only available in decorative panels

• When choosing fabrics for banding and color blocking, it is important to keep the construction of the fabrics similar in weight and style to assure fabrics will hang well together

• Heavyweight fabrics and liners may require a modified header or hem construction• Decorative panels in rod pocket style are not available with blackout liner

• 5" x 7" swatches are available to order at no charge; limit 10 per order; dye lots may vary between swatches and production• 1⁄2 yard memo samples are available to order at a surcharge for customers requiring a full repeat; dye lots may vary between

memo samples and production• Fabric by the yard is available for those customers who would like to make additional products not available in the program;

minimum order is 1 yard; sold in 1 yard increments; dye lots may vary; not covered under warranty

• All our soft products are hand crafted by artisans in the USA, assuring high quality and timely delivery

• Sheers, laces, and casement fabrics are available unlined only• Standard: a polyester/cotton liner that drapes and hangs nicely; the most commonly used liner; standard on decorative panels

and shades, excluding sheer fabrics• Blackout: a polyester/cotton liner blocks light from entering the room through the fabric, making it an ideal choice for day

sleepers, nurseries, and entertainment rooms; due to the multiple layers used in the construction of this liner, it will have a stiffer hand and there may be restrictions by product and fabric style; we have developed blackout solutions for our products, but due to stitching there may still be minimal light seepage

• Thermal: a cotton/polyester liner helps to block out excessive heat and cold; due to its thermal qualities, this liner will have a stiffer hand; an excellent choice for those interested in energy efficiency; due to the weight and stiffness there may be restrictions by product and fabric style

• Water repellent: a cotton/polyester liner that is treated to help protect the drapery fabric from dust and moisture; a great performance liner that hangs and drapes well; recommended for areas with high humidity such as bathrooms

• Flannel-back: a cotton liner with a brushed flannel back; recommended for light to medium weight fabrics to enhance the drape of the fabric and add protection; a great option for customers looking for some light control without blackout

Fabric Considerations

Color Variation

Appearance

Weight

Swatches and Cut Yardage

Assembled in the USA

Liner Options

February 2019

Inspired Drapes | 5

Fabrics with vertical stripes or prints will not have a consistent and uniform appearance from pleat to pleat or panel to panel on decorative panels.

Fabric Considerations

Patterns

Fabrics with prints and patterns will be interrupted at each sewn pleat in flat and hobbled Roman shades. Seamless or relaxed Roman fabric shades are recommended if you do not want a pattern interruption in your fabric shade.

Seamless Roman Flat Roman Hobbled Roman

All products will be paneled to cover widths wider than fabric width. Patterns are matched at seams.

Shades will be seamed vertically in three panels (1⁄4, 1⁄2, and 1⁄4). Seams may be visible.

Measurements for vertical and horizontal repeats are approximate.

Repeat: 12.5" vertical, 12.25" horizontal

February 2019

Fab

ric

Feat

ures

6 | s

wfc

onn

ect.

com

For

each

fab

ric s

tyle

, we

use

the

follo

win

g p

icto

gram

s to

ind

icat

e th

e p

rod

uct

styl

es a

nd o

ptio

ns a

vaila

ble

in t

hat

fab

ric. U

se t

his

info

rmat

ion

to id

entif

y fa

bric

s th

at a

re p

erfe

ctly

sui

ted

to

the

des

ired

ap

plic

atio

n. P

leas

e no

te t

he id

entif

ied

fab

rics

that

hav

e re

stric

tions

to

bla

ckou

t lin

er

due

to

fab

ric w

eigh

t or

con

stru

ctio

n. S

heer

s, c

asem

ents

, and

lace

s ar

e av

aila

ble

unl

ined

onl

y.

• N

umb

ers

that

are

not

cro

ssed

out

ind

icat

e st

yles

tha

t ar

e av

aila

ble

in t

he c

orre

spon

din

g fa

bric

• A

n X

thr

ough

a n

umb

er in

dic

ates

tha

t th

e st

yle

is n

ot a

vaila

ble

in t

hat

fab

ric•

Fire

ret

ard

ant

sym

bol

ind

icat

es t

hat

the

fab

ric is

fire

ret

ard

ant

Key

fo

r Fa

bri

c S

tyle

Lis

t

Fab

ric

Sha

de

Sty

les

Val

ance

s

Co

rnic

es

Co

ntra

st F

abri

c

1 2 3 4 5

Hob

ble

d R

oman

Flat

Rom

an

Sea

mle

ss R

oman

Rel

axed

Rom

an

Bal

loon

Ple

ated

1 2 3 4 5

Form

al

Inve

rted

Box

Ple

at

Hob

ble

d

Tailo

red

Fla

t

Tailo

red

Sca

llop

1 2 3

Con

tras

t C

asca

de

Lini

ng

Con

tras

t Fa

bric

s—To

p T

reat

men

ts

Con

tras

t Fa

bric

s—In

set

Sha

de

Ban

din

g

Dra

per

y S

tyle

s

Sw

ags

Fire

Ret

ard

ant

1 2 3 4

Ple

ated

Rod

Poc

ket

Sp

ecia

lty (G

rom

met

Top

, Bac

k Ta

b)

Rod

Poc

ket

Top

and

Bot

tom

1 2 3 4 5

Trad

ition

al S

wag

and

Cas

cad

es

Asy

mm

etric

al P

ole

Sw

ag a

nd C

asca

des

Rod

Poc

ket

Sw

ag/I

nser

t an

d C

asca

des

Pol

e S

carf

Tailo

red

Arc

h

Pas

ses

NFP

A 7

01

1 2

Fab

ric-W

rap

ped

/ P

rem

ium

Fab

ric-W

rap

ped

Fab

ric-W

rap

ped

—C

urve

d

Key

to

Pic

tog

ram

s K

ey t

o F

abri

c Ty

pe

PAT/

PR

TP

atte

rn/P

rint

SLD

Sol

id

SH

RS

heer

Key

to

Iro

ning

LoIro

n: lo

w s

ettin

g

Med

/Lo

Iron:

med

ium

/low

set

ting

Med

Iron:

med

ium

set

ting

Med

/Hi

Iron:

med

ium

/hig

h se

ttin

g

Hi

Iron:

hig

h se

ttin

g

No

Do

not

iron

Key

to

Ste

amin

g

Yes

Ligh

t st

eam

OK

No

Do

not

stea

m

(Ava

ilab

le w

ith

full

pro

gram

)(A

vaila

ble

with

fu

ll p

rogr

am)

Feb

ruar

y 20

19

Fab

ric

Feat

ures

Insp

ired

Dra

pes

| 7

Fab

ric

Sty

le L

ist

(1) N

ot a

vaila

ble

with

bla

ckou

t lin

er.

(3) S

elec

ted

col

ors.

(2) S

ee m

otor

izat

ion

cost

and

pro

duc

t re

fere

nce

guid

e fo

r si

ze a

rea

det

ails

.Fe

bru

ary

2019

Fab

ric

Nam

eP

rice

G

roup

Mo

tori

zed

M

ax

Sha

de

Are

a(2)

Fab

ric

Typ

eFa

bri

c

Co

nten

t

Fab

ric

Wid

th(in

ches

)

Fab

ric

Rep

eat

Iro

n S

etti

ngS

team

Fab

ric

Exc

epti

ons

Pas

ses

NFP

A 7

01

$ p

er

Yard

Vert

ical

(inch

es)

Ho

rizo

ntal

(inch

es)

Alc

eeC

3S

LD54

% c

otto

n/

46%

pol

yest

er55

00

Med

Y1

23

4 X1

23

45X

12

12

34

51

23

45

12

3X

X$7

6

Am

iaE

4S

LD60

% p

olye

ster

/ 40

% r

ayon

540

0M

ed/L

oN

12

34 X

12

34

5X1

21

23

45

12

34

51

23

XX

121

Ash

bur

yC

3S

LD55

% li

nen/

45

% v

isco

se55

00

LoY

12

34 X

12

34

51

21

23

45

12

34

51

23

76

Bay

field

AN

/AS

HR

100%

pol

yest

er59

00

LoY

12

34

12

34

5XX

XX

X1

2X

X1

23

45X

XX

X1

23

45X

XX

XX

12

3X

XX

•49

Boa

t H

ouse

A3

SLD

100%

cot

ton

570

0M

ed/H

iY

12

34 X

12

34

51

21

23

45

12

34

51

23 X

49

Brig

ham

C4

PAT/

PR

T51

% c

otto

n/

49%

pol

yest

er54

00.

625

Med

Y1

23

4 X1

23

45

12

12

34

51

23

45

12

3X

X76

Bru

shva

leC

2PA

T/P

RT

100%

pol

yest

er56

1 ⁄413

.875

14.1

25Lo

N1

23

4 X1

23

45X

12

12

34

51

23

45

12

3X

X76

Cad

ence

C4

SLD

51%

pol

yest

er/

49%

cot

ton

560

0M

ed/L

oN

12

34 X

12

34

51

21

23

45

12

34

51

23

XX

76

Cal

lum

C2

PAT/

PR

T10

0% p

olye

ster

550

3Lo

N1

23

4 X1

23

45

12

12

34

51

23

45

12

3 X76

Cas

selto

nD

3PA

T/P

RT

67.8

7% p

olye

ster

/ 24

.11%

ray

on/

8.02

% fl

ax56

1 ⁄46.

875

6.93

8Lo

N1

23

4 X1

23

45

12

12

34

51

23

45

12

3X

X92

Cat

amar

anB

N/A

SH

R10

0% p

olye

ster

596.

520

.5Lo

N1

23

41

23

45X

XX

XX

12

XX

12

34

5XX

XX

12

34

5XX

XX

X1

23

XX

X•

63

Cor

dob

aA

N/A

SH

R10

0% p

olye

ster

597.

54

LoY

12

34

12

34

5XX

XX

X1

2X

X1

23

45X

XX

X1

23

45X

XX

XX

12

3X

XX

•49

Drie

sdal

eD

2PA

T/P

RT

100%

cot

ton

550

3M

edY

12

34 X

12

34

51

21

23

45

12

34

51

23

XX

92

Ed

gew

ood

CN

/AS

HR

100%

pol

yest

er59

1.5

1.5

LoY

12

34

12

34

5XX

XX

X1

2X

X1

23

45X

XX

X1

23

45X

XX

XX

12

3X

XX

76

Ely

seE

4PA

T/P

RT

67%

line

n/

33%

cot

ton

5413

.213

.5M

edY

12

34 X

12

34

51

21

23

45

12

34

51

23

XX

121

Ely

se S

trip

e(1)

E5

PAT/

PR

T67

% li

nen/

33

% c

otto

n54

09

Med

N1

23

4 X1

23

45

12

12

34

5XX

X1

23

45

12

3X

X12

1

(3)

Fab

ric

Feat

ures

8 | s

wfc

onn

ect.

com

(1) N

ot a

vaila

ble

with

bla

ckou

t lin

er.

(2) S

ee m

otor

izat

ion

cost

and

pro

duc

t re

fere

nce

guid

e fo

r si

ze a

rea

det

ails

.

Fab

ric

Sty

le L

ist

Feb

ruar

y 20

19

Fab

ric

Nam

eP

rice

G

roup

Mo

tori

zed

M

ax

Sha

de

Are

a(2)

Fab

ric

Typ

eFa

bri

c

Co

nten

t

Fab

ric

Wid

th(in

ches

)

Fab

ric

Rep

eat

Iro

n S

etti

ngS

team

Fab

ric

Exc

epti

ons

Pas

ses

NFP

A 7

01

$ p

er

Yard

Vert

ical

(inch

es)

Ho

rizo

ntal

(inch

es)

Ep

stei

n(1)

C5

SLD

55%

cot

ton/

45%

line

n54

00

No

N1

23

4 X1

23

45

12

12

34

51

23

45

12

3X

X$7

6

Ep

stei

n S

trip

eC

5PA

T/P

RT

55%

cot

ton/

45%

line

n54

02.

25N

oN

12

34 X

12

34

51

21

23

45

12

34

51

23

XX

76

Eve

rdel

lE

4PA

T/P

RT

100%

cot

ton

Em

bro

ider

y: 1

00%

vis

cose

547.

636.

7M

ed/L

oN

12

34 X

12

34

5XX

1

21

23

45

12

34

51

23

XX

121

Eyr

eD

3PA

T/P

RT

100%

pol

yest

er56

1 ⁄810

.188

9.25

LoY

12

34 X

12

34

51

21

23

45

12

34

51

23

XX

92

Folw

ell

BN

/AS

HR

74%

pol

yest

er/

26%

cot

ton

590

2.25

No

Y1

23

41

23

45X

XX

XX

12

XX

12

34

5XX

XX

12

34

5XX

XX

X1

23

XX

X63

Gat

eway

C3

SLD

100%

cot

ton

550

0M

ed/L

oN

12

34X

12

34

51

21

23

45

12

34

51

23 X

76

Gly

ndon

D2

PAT/

PR

T58

% c

otto

n/

42%

pol

yest

er54

2713

.62

No

N1

23

4 X1

23

45

12

12

34

51

23

45

12

3X

X92

Goo

dle

ttD

2PA

T/P

RT

100%

cot

ton

5521

.514

Med

N1

23

4 X1

23

45X

12

12

34

51

23

45

12

3X

X92

Haz

elto

nD

3PA

T/P

RT

100%

cot

ton

550

1.62

5M

edN

12

34 X

12

34

51

21

23

45

12

34

51

23

XX

92

Hea

venl

yB

1S

LD55

% c

otto

n/

45%

pol

yest

er60

00

Med

/Lo

Y1

23

4 X1

23

45

12

12

34

51

23

45

12

3 X63

Hea

venl

y II

C2

PAT/

PR

T65

% p

olye

ster

/ 35

% c

otto

n60

137.

5M

ed/L

oY

12

34 X

12

34

51

21

23

45

12

34

51

23

XX

76

Hen

nep

inC

4S

LD95

% p

olye

ster

/5%

line

n55

00

Med

/Hi

Y1

23

4 X1

23

45

12

12

34

51

23

45

12

3X

X76

Hol

lisC

3PA

T/P

RT

50%

cot

ton/

50

% p

olye

ster

580

2.81

25Lo

N1

23

4 X1

23

45

12

12

34

51

23

45

12

3X

X76

Kau

fman

A3

SLD

70%

pol

ypro

pyl

ene/

30

% p

olye

ster

540

0M

edN

12

34 X

12

34

51

21

23

45

12

34

51

23

49

Leon

ard

D3

SLD

100%

pol

yest

er54

00

No

Y1

23

4 X1

23

45

12

12

34

51

23

45

12

3 X92

Lior

aD

N/A

SH

R10

0% p

olye

ster

543.

506.

25Lo

Y1

23

41

23

45X

XX

XX

12

XX

12

34

5XX

XX

12

34

5XX

XX

X1

23

XX

X•

92

Fab

ric

Feat

ures

Insp

ired

Dra

pes

| 9

(1) N

ot a

vaila

ble

with

bla

ckou

t lin

er.

(2) S

ee m

otor

izat

ion

cost

and

pro

duc

t re

fere

nce

guid

e fo

r si

ze a

rea

det

ails

.

Fab

ric

Sty

le L

ist

Feb

ruar

y 20

19

Fab

ric

Nam

eP

rice

G

roup

Mo

tori

zed

M

ax

Sha

de

Are

a(2)

Fab

ric

Typ

eFa

bri

c

Co

nten

t

Fab

ric

Wid

th(in

ches

)

Fab

ric

Rep

eat

Iro

n S

etti

ngS

team

Fab

ric

Exc

epti

ons

Pas

ses

NFP

A 7

01

$ p

er

Yard

Vert

ical

(inch

es)

Ho

rizo

ntal

(inch

es)

Mab

inF

3PA

T/P

RT

65%

cot

ton/

35

% p

olye

ster

E

mb

roid

ery:

100

% p

olye

ster

559

8.6

Med

Y1

23

4 X1

23

45

12

12

34

51

23

45

12

3X

X$1

33

Mar

low

B3

PAT/

PR

T10

0% p

olye

ster

5418

13.5

Med

N1

23

4 X1

23

45

12

12

34

51

23

45

12

3X

X63

Men

age

E3

PAT/

PR

T10

0% c

otto

n56

3 ⁄416

.83

13.5

LoN

12

34 X

12

34

51

21

23

45

12

34

51

23

XX

121

Mila

nD

3S

LD50

% c

otto

n/

50%

pol

yest

er58

00

Med

Y1

23

4 X1

23

45

12

12

34

51

23

45

12

3X

X92

Nap

les

C2

SLD

64%

ray

on/

36%

ace

tate

540

0Lo

N1

23

4 X1

23

45

12

12

34

51

23

45

12

3 X76

Nar

aE

4PA

T/P

RT

55%

line

n/

45%

cot

ton

5313

.513

.5M

ed/H

iN

12

34 X

12

34

5X1

21

23

45

12

34

51

23

XX

121

Nor

cros

sB

4PA

T/P

RT

100%

cot

ton

5727

27M

ed/H

iY

12

34 X

12

34

51

21

23

45

12

34

51

23

XX

63

Ort

ley

E4

PAT/

PR

T55

% p

olye

ster

/ 28

% c

otto

n/

17%

line

n54

1 ⁄214

.617

.3Lo

Y1

23

4 X1

23

45X

12

12

34

51

23

45

12

3X

X12

1

Ova

tion

C3

SLD

51%

pol

yest

er/

49%

cot

ton

540

0M

edY

12

34 X

12

34

5X1

21

23

45

12

34

51

23

XX

76

Ple

mon

sE

3PA

T/P

RT

100%

pol

yest

er

Em

bro

ider

y: 1

00%

pol

yest

er52

3.12

3.25

Med

/Lo

N1

23

4 X1

23

45X

X1

21

23

45

12

34

51

23

XX

121

Roc

hest

erE

N/A

SH

R96

% li

nen/

2%

lure

x/

2% c

otto

n54

03.

75M

edN

12

34

12

34

5XX

XX

X1

2X

X1

23

45X

XX

X1

23

45X

XX

XX

12

3X

XX

121

Ros

lyn

C2

SLD

74%

pol

yest

er/

26%

vis

cose

550

0M

ed/L

oY

12

34 X

12

34

5X1

21

23

45

12

34

51

23

XX

76

Stin

nett

E4

PAT/

PR

T55

% li

nen/

45

% r

ayon

5427

27Lo

Y1

23

4 X1

23

45X

12

12

34

51

23

45

12

3X

X12

1

Sun

set

D3

PAT/

PR

T50

% c

otto

n/

50%

pol

yest

er58

14.5

14.7

5M

edY

12

34 X

12

34

51

21

23

45

12

34

51

23

XX

92

Valle

y V

iew

D2

PAT/

PR

T10

0% p

olye

ster

5412

.512

.25

LoY

12

34 X

12

34

51

21

23

45

12

34

51

23

XX

92

Vent

uria

(1)

E4

PAT/

PR

T10

0% c

otto

n E

mb

roid

ery:

100

% p

olye

ster

525.

254.

5M

ed/H

iY

12

34 X

12

34

5X1

21

23

45X

XX

12

34

5XX

XX

X1

23

XX

121

Fab

ric

Feat

ures

10 |

swfc

onn

ect.

com

(1) N

ot a

vaila

ble

with

bla

ckou

t lin

er.

(2) S

ee m

otor

izat

ion

cost

and

pro

duc

t re

fere

nce

guid

e fo

r si

ze a

rea

det

ails

.

Fab

ric

Sty

le L

ist

Feb

ruar

y 20

19

Fab

ric

Nam

eP

rice

G

roup

Mo

tori

zed

M

ax

Sha

de

Are

a(2)

Fab

ric

Typ

eFa

bri

c

Co

nten

t

Fab

ric

Wid

th(in

ches

)

Fab

ric

Rep

eat

Iro

n S

etti

ngS

team

Fab

ric

Exc

epti

ons

Pas

ses

NFP

A 7

01

$ p

er

Yard

Vert

ical

(inch

es)

Ho

rizo

ntal

(inch

es)

Vin

son

C1

SLD

100%

pol

yest

er58

00

Med

/Lo

Y1

23

4 X1

23

45

12

12

34

51

23

45

12

3 X•

$76

War

wic

kD

4PA

T/P

RT

100%

cot

ton

550

7.5

Med

/Hi

N1

23

4 X1

23

45

12

12

34

51

23

45

12

3X

X92

Fab

ric

Feat

ures

Insp

ired

Dra

pes

| 11

Fab

ric

Sty

le L

ist

(2) S

ee m

otor

izat

ion

cost

and

pro

duc

t re

fere

nce

guid

e fo

r si

ze a

rea

det

ails

.

Feb

ruar

y 20

19

Fab

ric

Nam

eP

rice

G

roup

Mo

tori

zed

M

ax

Sha

de

Are

a(2)

Fab

ric

Typ

eFa

bri

c

Co

nten

t

Fab

ric

Wid

th(in

ches

)

Fab

ric

Rep

eat

Iro

n S

etti

ngS

team

Fab

ric

Exc

epti

ons

Pas

ses

NFP

A 7

01

$ p

er

Yard

Vert

ical

(inch

es)

Ho

rizo

ntal

(inch

es)

Line

rs

Bla

ckou

tA

4LI

NE

R70

% p

olye

ster

/ 30

% c

otto

n55

00

N/A

N/A

12

34X

X1

23

45X

XX

XX

12

XX

12

34

5XX

XX

X1

23

45X

XX

XX

12

3X

XX

$35

Flan

nel-

Bac

kA

N/A

LIN

ER

100%

cot

ton

540

0N

/AN

/A1

23

4XX

12

34

5XX

XX

X1

2X

X1

23

45X

XX

XX

12

34

5XX

XX

X1

23

XX

X35

Sta

ndar

dA

N/A

LIN

ER

65%

pol

yest

er/

35%

cot

ton

541 ⁄2

00

N/A

N/A

12

34X

X1

23

45X

XX

XX

12

XX

12

34

5XX

XX

X1

23

45X

XX

XX

12

3X

XX

35

Ther

mal

AN

/ALI

NE

R70

% p

olye

ster

/ 30

% c

otto

n54

1 ⁄20

0N

/AN

/A1

23

4XX

12

34

5XX

XX

X1

2X

X1

23

45X

XX

XX

12

34

5XX

XX

X1

23

XX

X35

Wat

er R

epel

lent

AN

/ALI

NE

R50

% p

olye

ster

/ 50

% c

otto

n55

00

N/A

N/A

12

34X

X1

23

45X

XX

XX

12

XX

12

34

5XX

XX

X1

23

45X

XX

XX

12

3X

XX

35

Trim

Bru

sh F

ringe

N/A

N/A

TRIM

100%

pol

yest

er11 ⁄2

N/A

N/A

No

N1

23

4X1

23

45

12

XX

12

34

51

23

45X

XX

XX

N/A

$17

Glo

be

Frin

geN

/AN

/ATR

IM10

0% p

olye

ster

Insi

de

bal

l: w

ood

11 ⁄2N

/AN

/AN

oN

12

34X

12

34

51

2X

X1

23

45

12

34

5XX

XX

XN

/A22

Gim

pN

/AN

/ATR

IM51

% c

otto

n/

43%

ace

tate

/ 6%

pol

yest

er7 ⁄1

6N

/AN

/AN

oN

12

34X

12

34

51

2X

X1

23

45X

XX

XX

12

34

5XX

XX

XN

/A17

Flat

Gim

pN

/AN

/ATR

IM60

% v

isco

se/

40%

ray

on/

1 ⁄2N

/AN

/AN

oN

12

34X

12

34

51

2X

X1

23

45X

XX

XX

12

34

5XX

XX

XN

/A17

Rib

bon

Gim

pN

/AN

/ATR

IM36

% a

ceta

te/2

3% v

isco

se/

22%

acr

ylic

/16%

pol

yest

er/

3% n

ylon

1 ⁄2N

/AN

/AN

oN

12

34X

12

34

51

2X

X1

23

45X

XX

XX

12

34

5XX

XX

XN

/A17

Tear

dro

p C

ryst

al

Bea

d T

rimN

/AN

/ATR

IM80

% a

cryl

ic/

20%

pol

yest

er1

N/A

N/A

No

N1

23

4X XX

X1

23

45

12

XX

12

34

5XX

XX

X1

23

45X

XX

XX

N/A

17

Rou

nd C

ryst

al

Bea

d T

rimN

/AN

/ATR

IM50

% a

cryl

ic/

40%

cot

ton

10%

ray

on1 ⁄2

N/A

N/A

No

N1

23

4X1

23

45

12

XX

12

34

51

23

45X

XX

XX

N/A

22

Cor

dN

/AN

/ATR

IMVa

ries

by

styl

e3 ⁄1

6, 1 ⁄4

, 3 ⁄8N

/AN

/AN

oN

12

34X X

XX

12

34

5XX

XX

X1

21

23

45X

XX

XX

12

34

5XX

XX

XN

/A17

Dec

o Ta

pe

N/A

N/A

TRIM

Varie

s b

y st

yle

15 ⁄8,

13 ⁄4, 2

N/A

N/A

No

N1

23

4X XX

X1

23

45

12

XX

12

34

5XX

XX

X1

23

45X

XX

XX

N/A

22

12 | swfconnect.com

Colors

Ang

el F

ire:

xx9

72

Bay

Ber

ry: x

x965

Bla

ck: x

x156

Bro

nze:

xx0

1

Cam

el: x

x086

Clo

ver:

xx0

49

Cre

am: x

x715

Dar

k B

eig

e: x

x350

Dar

k C

love

r: x

x140

Dar

k R

ock

Gre

y: x

x139

Lig

ht G

old

: xx0

2

Lig

ht G

reen

: xx0

8

Mai

ze: x

x002

Mar

oo

n: x

x360

Mo

rnin

g B

lue:

xx0

14

Mo

rnin

g G

lory

: xx6

39

Nig

ht S

had

ow

: xx8

26

Ro

ck G

rey:

xx3

99

San

d: x

x04

Stu

cco

: xx9

63

Tear

dro

p W

hite

: xx0

5

Tend

er T

aup

e: x

x103

Toff

ee: x

x296

Whi

te: x

x417

11⁄2" Brush Fringe • • • • • • • • • • • • • • • •

11⁄2" Mingled Globe Fringe • • • • •

7⁄16" Gimp • • • • • • • • • • • • • • • •

1⁄2" Flat Gimp • • • • • • •

1⁄2" Ribbon Gimp • • •

1" Teardrop Crystal Bead Trim

• • • •

1⁄2" Round Crystal Bead Trim

• • • • •

3⁄8" Cord • • • • • • • • • • • • • • • •

3⁄8" Lip Cord • • • • • • • • • • • • • • • •

1⁄4" Metallic Lip Cord • • •

3⁄16" Mingled Lip Cord • • • • • •

15⁄8" Deco Tape • •

13⁄4" Deco Tape • •

13⁄4" Deco Tape •

2" Deco Tape • • • • •

2" Deco Tape • • • •

2" Deco Tape • • • • • • •

Trim Styles

Options

February 2019

Inspired Drapes | 13

Decorative Panels

Features and Benefits of Our Decorative Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Decorative Panel Styles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Decorative Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Decorative Panel Styles Hardware Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Decorative Panel Styles Minimums and Maximums. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Decorative Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Grommet Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Color Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Edge Banding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Trim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Features

Size Considerations

Specifications

Finishing Options

February 2019

14 | swfconnect.com February 2019

Inspired Drapes | 15

Double turned hem provides weight and stability. Weights are added to each corner of the decorative panel.

Double Turned Hem

Available in 1 width and 2 width options in pinch pleat, rod pocket, grommet, and back tab styles.

Decorative Panels

Fullness is based on the style and width of your fabric.

Decorative Panel Fullness

Features

Features and Benefits of Our Decorative Panels

All our seamed drapes have patterns matched to assure the pattern is continuous across the drape, creating visual continuity.

Seams fall to the back of the pleat or fold, making them less noticeable.

Rod pocket size will be 4". Back tab size will be 4".

Rod Pocket and Back Tab

Patterns Matched at SeamsHidden Seams

Liners are added to the back of all decorative panels (except sheer fabrics) to help protect the fabric from outside elements and increase energy efficiency.

Lining

Pleated draperies are pre-pinned at 1⁄2" for easy installation.

Pre-Pinned Decorative Panels

Pin Hook

1⁄4" 1⁄2" 1"11⁄4" 11⁄2"

13⁄4"

Due to construction and/or weight of certain fabrics, a modified hem may be required. These hems will not have mitered corners.

Modified Straight Hem

Mitered corners come standard on all decorative panel styles.

Mitered Corners

February 2019

16 | swfconnect.com

Pleated Rod Pocket Specialty

Pinch Pleat Rod Pocket Top Back Tab

Grommet Top

Features

Decorative Panel Styles

NOTE: Decorative panel hardware is not included with decorative panels.

February 2019

Inspired Drapes | 17

Features

Decorative Panel Styles Hardware Summary

Decorative Panel Styles

Pleated Rod Pocket Back Tab Grommet Top

Rod Type

Curtain Rod

• •

Decorative Pole

• • •

Decorative Pole with Rings

• •Slouch application

Decorative Panels

Decorative Panels

• Preset widths—available in only 1 or 2 fabric widths and made to order lengths

February 2019

18 | swfconnect.com

Size Considerations

Decorative Panel Styles Minimums and Maximums

Decorative Panel Styles

Pleated Rod Pocket Back Tab Grommet Top

Fullness

Approximate Fullness: Drapery Fabrics

Based on drapery fabric width Based on drapery fabric width Based on drapery fabric width Based on drapery fabric width

Approximate Fullness: Sheers Based on drapery fabric width Based on drapery fabric width Based on drapery fabric width Based on drapery fabric width

Decorative Panels

Minimum Width per Panel 1 fabric width approximately 20" 1 fabric width approximately 20" 1 fabric width approximately 20" 1 fabric width approximately 20"

Maximum Width per Panel 2 fabric widths approximately 40" 2 fabric widths approximately 40" 2 fabric widths approximately 40" 2 fabric widths approximately 40"

Minimum Length (inches) 18 18 18 18

Maximum Length (inches) 224 224 224 224

Returns

Decorative Panel Return and leading edge both 4"

Headings

4" Double Turned Headers with Buckram (some exceptions will apply based on fabric weight or construction)

• • •

February 2019

Inspired Drapes | 19

Decorative Panel Styles

Pleated Rod Pocket Back Tab Grommet Top

Standard

FeaturesStandard pin set: 1⁄2"

Leading edge both sides: 4"

Rod pocket size: 4"Heading: none

Accommodates rod diameter up to: 2"

Back tab accommodates rod diameters up to: 2"

Tab length: 4"

Grommet accommodates rod diameters up to: 1"

Grommet style: round (choice of color)

Options

Liners: Water Repellent, Thermal, Flannel-Back

• • • •

Liners: Blackout • • •

Specifications

Decorative Panels

• Available in 1 width or 2 width panels• See fabric style list for fabric width• No additional calculations made to length; ordered length equals finished length• Standard liner comes on all; alternative liners are available for a surcharge except sheers, casement, and laces• Liner-only decorative panels: available in pinch pleat and rod pocket styles only

Leading EdgeApproximately 4"

Estimated Pleat Count Chart

Decorative Panel Width (inches) Per Panel1 Width—Covers Approximately 20" 52 Widths—Covers Approximately 40" 10

February 2019

20 | swfconnect.com

Decorative Pole Choice

1" Decorative Pole

Distance to Top of Drape

Approximately 11⁄4"

Gro

mm

et S

tyle

Round

•

Signature Series Inspired Decorative Pole Hardware— Suggested Color Coordination

Manhattan Prominence Regency

Gro

mm

et C

olo

rs a

nd N

umb

ers

Black—39 • 431—Black 411—Raven412—Golden Black

Brushed Nickel—45 • 442—Brushed Nickel 432—Golden Silver 401—Antique Ivory402—Vintage White

Vintage Gold—15 • 434—Vintage Gold

412—Golden Black410—Gilded Walnut

408—Gilded Mahogany404—Antique Gold

Aged Pewter—16 • 432—Aged Pewter 403—Antique Pewter

Bronze—2 • 436—Bronze

407—Classic Mahogany408—Gilded Mahogany

409—Regal Walnut410—Gilded Walnut

Golden Bronze—19 • 433—Golden Bronze405—Roasted Pecan

406—Sienna Rosewood409—Regal Walnut

Satin Brass—18 • 443—Satin Brass 404—Antique Gold

top of drape

Specifications

Grommet Top

• Finished grommet length includes additional fabric above the grommet top opening (see chart at the left); adjustment is added to the ordered length by manufacturing

February 2019

Inspired Drapes | 21

Finishing Options

(1) Not available on sheers, laces, or casement fabrics

1⁄3 Bottom

Inside Edge

Inside Edge

1⁄3 Top

Bottom Hem

Inside and Outside Edges

1⁄5 Bottom

Inside Edge and Bottom Hem

Outside Edge

1⁄5 Top

Inset Gimp

Color Blocking(1)

Trim(1)

Edge Banding(1)

• Secondary color is the 1⁄3 or 1⁄5 portion of the decorative panel• Not available in conjunction with banding or trim

• Trim can be attached on the inside edge, bottom hem, or inside edge and bottom hem• Not available in conjunction with banding or color blocking• Gimp only can be attached inset 2" from inside edge

• 3" accent edge banding • Banding can be attached on the inside edge, outside edge, or inside and outside edges• Not available in conjunction with color blocking or trim

February 2019

22 | swfconnect.com February 2019

Inspired Drapes | 23

Features and Benefits of Our Shades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26Safety Features of Our Shades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Motorized Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Fabric Shade Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29

Corded Shades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Continuous-Loop Shades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Cordless Shades: Hobbled Roman, Flat Roman, Seamless Roman, Relaxed Roman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Depth Requirements for Inside Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Fabric Shades

Features

Options

Size Considerations

February 2019

24 | swfconnect.com February 2019

Inspired Drapes | 25

Features and Benefits of Our Shades

Features

Flat, seamless, and relaxed Roman shades with blackout liner are constructed to create a pinhole free shade.

Raise or lower your shade from the bottom or the top for privacy and light control. Standard control with color coordinated cords and tassels. Not available with multi-shade.

No struggling with wing nuts. Our snap-in brackets make installation quick and easy.

Returns are standard on outside mount shades and valances, and are designed for flexibility on the job site.

Create even folds without the hassle of training the pleats. All shades except balloon pleated have hidden support rods included in the price.

All our seamed shades have patterns matched to assure the pattern is continuous across the shade.

Multiple shades on one headrail available in two-on-one with standard cord lift and continuous loop controls, and three-on-one with continuous loop controls only.

Back valance coordinates with liner; standard on back control with cordless, continuous-loop, or motorized lift option. Available for a surcharge on standard control.

Shade comes off the back of the headrail with controls placed in the front. Color coordinated cords and tassels on standard control.

All our headrails are wrapped with self fabric for a beautifully finished look.

To prevent shadows from the lining seams, our lining is seamless on all shades except balloon pleated style.

Attached valance is free with front control and bottom up/top down. Valance is available with a surcharge on back controls. (Minimum valance length on front controls is 8".)

Pinhole Free Blackout Feature

Bottom Up/Top Down Controls

Snap-In Install Brackets

Adjustable Returns

Hidden Support Rods

Patterns Matched at Seams

Multi Shade Option

Back Valance

Front Control Option

Fabric-Wrapped Wood Headrail

Seamless Lining

Fabric Valance

Clicks to snap in place

February 2019

26 | swfconnect.com

Features and Benefits of Our Shades

Safety Features of Our Shades

Features

Patented cordless lift system available on all shade styles except balloon pleated.

Prevents cord from being easilypulled away from the shade and forming a loop.

Single continuous-loop metal bead chain allows you to raise and lower your shade smoothly and easily. Great for larger shades.

Decorative trim options, available on the bottom of the valance, highlight the custom look of your shade.

Operate your shades from virtually anywhere in your home. Provides ease of operation for hard to reach or large windows.

2" edge or inset banding, or decorative tape option on seamless and relaxed Roman styles. Standard on valance when ordered on shade. Not available on multi-shade valances.

Edge and Inset Accent

Single Pull Cordless Lift Option

Safety Cord Shroud with Metal Rings

Standard clear cord cleat comes with every shade. Cord winder and decorative cord cleats are available for a surcharge.

Cord Management Options

Continuous-Loop Lift Option

Valance Trim

Motorized Lift Option

Cord Winder

Standard Cord Cleats

Solid Brass

Antique Brass

February 2019

Inspired Drapes | 27

Features

Motorized Lift

• Refer to motorization cost and product reference guide for additional options, sizing, and pricing

• Window treatments can be operated from virtually anywhere in the home• Provides easy operation of hard-to-reach or large window coverings• Efficiently manages energy (heat gain and loss)• Operate multiple window treatments simultaneously or individually• A safer alternative to accessible cords that are traditionally used to operate window

coverings; ideal for homes with children and pets• Easily integrated with home automation systems• Low voltage motorization requires no costly electrical hardwiring• Multiple control options available

NOTE: Motorization components and accessories have a five-year limited warranty, excluding batteries.

February 2019

28 | swfconnect.com

Control Choices (Back Control is Standard on all Control Options) Lining Choices Shade Options

Co

rdle

ss

Mo

tori

zed

Co

ntin

uous

-Lo

op

Sta

ndar

d C

ord

No

n-O

per

atio

nal

Sta

ndar

d:

Incl

uded

on

All

Sha

des

Wat

er R

epel

lent

, T

herm

al,

Flan

nel-

Bac

k

Bla

cko

ut

Bo

tto

m U

p/

Top

Do

wn

Fro

nt C

ont

rol

Up

turn

ed

Hea

dra

il

Fro

nt V

alan

ce:

6", 8

", 1

0"

Hobbled Roman Shade • • • • • • • • • • • •

Flat Roman Shade • • • • • • • • • • • •

Seamless Roman Shade • • • • • • • • • • • •

Relaxed Roman Shade • • • • • • • • • • •

Balloon Pleated Shade • • • • •

Cordless • • • • • •

Motorized • • • • •

Continuous-Loop • • • • • •

Standard Cord • • • • • • • •

Non-Operational • • • • • • •

Bottom Up/ Top Down • • • • • •

Front Control • • • • • • • • • • 8" min.

Fabric Shade Styles

Options

Option surcharges may apply. See pricing section for details.

February 2019

Inspired Drapes | 29

Shade Options Finishing Options Information

Bac

k Va

lanc

e

Co

rner

Win

do

w

Bay

Win

do

w

Mul

tip

le S

had

es

Two

-on-

One

H

ead

rail

Mul

tip

le S

had

es

Thr

ee-o

n-O

ne

Hea

dra

il

Inse

t B

and

ing

Ed

ge

Ban

din

g

Dec

ora

tive

Tap

e

Dec

ora

tive

C

ord

Cle

ats

Vala

nce

Trim

Co

ord

inat

ing

C

ord

s an

d

Tass

els

Pat

tern

In

terr

upti

on

Hobbled Roman Shade • • • • • • • • •

Flat Roman Shade • • • • • • • • •

Seamless Roman Shade • • • • • • • • • • •

Relaxed Roman Shade • • • • • • • • • • •

Balloon Pleated Shade • •

Cordless • • • • • • • •

Motorized • • • • • • • •

Continuous-Loop • • • • • • • • • •

Standard Cord • • • • • • • • • •

Non-Operational • • • • • • • • • •

Bottom Up/ Top Down • • • • • • •

Front Control • • • • ••

Standard cord

••

Standard cord

•

Fabric Shade Styles

Options

Option surcharges may apply. See pricing section for details.

February 2019

30 | swfconnect.com

Size Considerations

Corded Shades

Continuous-Loop Shades

Shade Style

Single Shade Multiple Shades on One Headrail* Bottom Up/Top Down Shade**

Width Length Width Length Width Length

Min (inches)

Max (inches)

Min (inches)

Max (inches)

Min Panel

(inches)

Max Panel

(inches)

Max Shade (inches)

Min Shade (inches)

Max Shade (inches)

Min (inches)

Max (inches)

Min (inches)

Max (inches)

Hobbled Roman 12 106 18 103 12 106 144 18 103 16 74 18 103

Flat Roman 12 106 18 120 12 106 144 18 120 16 74 18 120

Seamless Roman 12 106 18 120 12 106 144 18 120 16 74 18 120

Relaxed Roman 12 106 18 120 12 106 144 18 120 Not available

Balloon Pleated 24 90 18 103 Not available

Shade Style

Single Shade Multiple Shades on One Headrail

Width Length Width Length

Min (inches)

Max (inches)

Min (inches)

Max (inches)

Min Panel (inches)

Max Panel (inches)

Max Shade (inches)

Min Shade (inches)

Max Shade (inches)

Hobbled Roman 24 106 18 100 24 106 144 18 100

Flat Roman 24 106 18 100 24 106 144 18 100

Seamless Roman 24 106 18 100 24 106 144 18 100

Relaxed Roman 24 106 18 100 24 106 144 18 100

Balloon Pleated 28 90 18 100 Not available

NOTES: For all inside mount applications, 3⁄8" deduction is taken by the manufacturer on ordered width. Beaded chain length is approximately 3⁄4 the length of the shade. Specific lengths may be requested. Chain tensioner must be installed for the shade to operate correctly. Three-on-one multi-shade requires common lift left or common lift right. Center shade will not have individual control.

NOTES: For all inside mount applications, 3⁄8" deduction is taken by the manufacturer on ordered width. Cord length on shades is approximately 1⁄3 the length of the shade. *Cord lift multi-shade available in two-on-one only. **Cord lift BUTD not available in multi-shade.

February 2019

Inspired Drapes | 31

Size Considerations

Length up to (inches)

Width up to (inches)

18 24 30 36 42 48 54 60 66 72 78 84 90 96

243036424854606672788490 N/A96 N/A102 N/A N/A108 N/A N/A

Length up to (inches)

Width up to (inches)

18 24 30 36 42 48 54 60 66 72 78 84 90 96

243036424854606672788490 N/A N/A N/A96 N/A N/A N/A N/A

102 N/A N/A N/A N/A N/A108 N/A N/A N/A N/A N/A N/A

Cordless Shades: Hobbled Roman, Flat Roman, Seamless Roman, Relaxed Roman

NOTE: Minimum width 18", minimum length 18". Shaded area indicates headrail size, see below for details.

NOTE: Minimum width 18", minimum length 18". Shaded area indicates headrail size, see below for details.

Minimum and Maximum Cordless Shades: Standard, Water Repellent, Thermal

Minimum and Maximum Cordless Shades: Blackout, Flannel-Back

Depth Requirements for Inside Mount

Headrail Dimensions (inches) Minimum Depth Mount (inches) Flush with Casing (inches)

Standard Corded 11⁄2 D x 5⁄8 L 3⁄4 23⁄8

Upturned Headrail(1) 5⁄8 D x 11⁄2 L 1 11⁄4

Continuous-Loop/Motorized 21⁄4 D x 5⁄8 L 3⁄4 31⁄8

Cordless: Areas Shaded Dark 11⁄2 D x 5⁄8 L 3⁄4 23⁄8

Cordless: Areas Shaded Light 21⁄4 D x 5⁄8 L 3⁄4 31⁄8

Partially recessed headrail in window casing/molding

Fully recessed headrail in window casing/molding

(1) For direct mount, front control shades add 3⁄4" to the mounting depths for clearance of the pleat tabs and rings. Upturned headrail is direct mount only, mounting brackets are not available.

NOTE: For all inside mount applications, 3⁄8" deduction is taken by the manufacturer on ordered width.

February 2019

32 | swfconnect.com February 2019

Inspired Drapes | 33

Features and Benefits of Our Cornices and Pillows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Cornice Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Premium Fabric-Wrapped Cornices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Fabric-Wrapped Cornices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Pillows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Cornices and Pillows

Features

Cornice Features

Pillows Features and Options

Cornice Options and Size Considerations

February 2019

34 | swfconnect.com February 2019

Inspired Drapes | 35

Features and Benefits of Our Cornices and Pillows

Features

Premium fabric-wrapped cornices have a wood base and a self fabric dust cover.

No returns on inside mount cornices and board-mounted top treatments. Image shows outside mount to show detail only.

Premium fabric-wrapped cornices and board-mounted top treatments come with a fabric-wrapped dust cover.

Contrast welting on premium fabric-wrapped cornices and select fabric-wrapped styles.

Fabric-wrapped curved cornice comes with decorative cording and contrast center option.

Fabric-wrapped cornices are light weight and easy to install.

Returns available on left side, right side, or both sides on all cornices and most board-mounted top treatments.

Fabric-wrapped cornices do not come with a dust cover.

Premium Fabric-Wrapped Cornices

No Returns

Dust Cover

Contrast Welting

Curved Cornice Contrast

Decorative pillows add pops of color to any room décor. Available in five shape and size options.

Decorative Pillows

Fabric-Wrapped Cornices

Returns

No Dust Cover

Primary Fabric

Contrast Fabric

Primary Fabric

February 2019

36 | swfconnect.com

Premium Fabric-Wrapped Fabric-Wrapped

Arch Linear Contour Straight

Casual Scallop Curved Traditional

Deco

Features

Cornice Styles

February 2019

Inspired Drapes | 37

(1) Dust cover top is covered with face fabric; dust cover bottom is covered with White liner.(2) Fabric will be rotated 90 degrees when railroaded.(3) Returns available on left side only, right side only, or both sides.(4) Curved style comes standard with cording as shown.

Arch Casual Deco Scallop Linear

Features and Options

Base Construction Wood Wood Wood Wood Wood

Dust Cover(1) • • • • •Welting: Self or Contrast • • • • •Cording • • • • •Corner/Bay Window Mitered corners

Railroaded Fabric(2) • • • • •Minimums and Maximums

Minimum Width (inches) 20

Maximum Width (inches) 190

Lengths Available (inches) 9-21 in 1" increments 6-21 in 1" increments

Returns(3) (inches) 2-8 in 1" increments

Dust Cover Depth (inches)Outside mount: return size

Inside mount: 3

Oversize Fee (inches) 144 or wider

Hinged (inches) 95

Contour Curved(4) Traditional Straight

Features and Options

Base Construction Synthetic Synthetic Synthetic Synthetic

Welting: Self or Contrast • • •Cording •Contrast Fabric •Corner Window Butt/bypass

Railroaded Fabric(2) • • • •Minimums and Maximums

Minimum Width (inches) 20

Maximum Width (inches) 144

Lengths Available (inches) 12 6, 8, 10, 12

Returns(3) (inches) 3, 6

Options and Size Considerations

Premium Fabric-Wrapped Cornices

Fabric-Wrapped Cornices

February 2019

38 | swfconnect.com

Features

Options

Pillows

Pillows

Square• 16" x 16"• 20" x 20"• 22" x 22" Rectangle• 12" x 16"• 16" x 20"

Contrast WeltingWelting Teardrop Trim

February 2019

Inspired Drapes | 39

Decorative Panel Styles and Hardware Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Decorative Panel Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Decorative Panel Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Measuring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Bay Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Corner Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Measuring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Premium Fabric-Wrapped Cornices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Fabric-Wrapped Cornices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Bay and Corner Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Butt/Bypass—Corner Windows Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Decorative Panel Measure and Install Reference Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49-50Installation Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-52

Measuring Instructions

How to Measure for Decorative Panels

How to Measure for Shades

How to Measure for Cornices

Specifications

February 2019

40 | swfconnect.com February 2019

Inspired Drapes | 41

Type of Rod Decorative Panel Style LengthMinimum Recommended

Rod Placement

Curtain Rod

Decorative panels, with valance over them

Rod pocket

Top of rod to desired length

4" to 5" above the glass

Decorative Pole

Grommet top

Rod pocket

Back tab

Top of pole to desired length

61⁄2" to 7" above the glass

Decorative Pole with Rings

Pleated

Rod pocket

Using eyelet: bottom of ring to desired length

Using clip: hinge of clip to desired length

61⁄2" to 7" above the glass

How to Measure for Decorative Panels

Decorative Panel Styles and Hardware Summary

Consider the look you want to create when determining the type of decorative panel hardware and its placement. Rod type and placement determine the width and length of the decorative panels needed. General guidelines follow.

Decorative Panel Width

Determining the Width Placement of the Rod

Minimum Rod Placement

Face Width = glass width + 8" (4" per side)

Stack Back ConsiderationAdditional wall coverage may be needed in order for the decorative panel to stack back off the glass when opened.

The general rule is that the total stack back needed is approximately 1⁄3 the width of the window. Additional width may be needed for heavy or bulky fabrics.

Face Width = glass width + total stack back

Face Width

Glass Width

1⁄2 of Stack Back

1⁄2 of Stack Back

Face Width

Glass Width

+4 +4

Face Width

Glass Width

Total Stack Back+4

Covers Approximately Edge to Edge

1 Width (inches)

2 Widths (inches)

Pinch Pleat 2.5 to 1 20 40

Rod Pocket 2.5 to 1 20 40

Back Tab 2 to 1 20 40

Grommet 2 to 1 20 40

February 2019

42 | swfconnect.com

Determine Your Starting Point (based on the type of rod and style of decorative panel you have chosen)

Type of Decorative Panel Starting Point

Type of Decorative Panel Starting Point

Pleated

Grommet Top

Back Tab

Rod Pocket

Determine the Length to be Covered: the bottom stopping point of your decorative panel. The five most popular styles are below.

Determine your decorative panel style and the type of decorative panel hardware you will use (see decorative panel styles and hardware summary chart for pairing options.)

LengthThere are only two factors you need to determine the length of the decorative panel: the length you want to be covered and the starting point of the decorative panel.

How to Measure for Decorative Panels

Decorative Panel Length

SillTop of sill less 1⁄2"

ApronBottom of apron plus 1"

FloorTop of floor less 1⁄2"

TrouserTop of floor plus 2"

PuddleTop of floor plus 6"-10"

Measure from above starting point.

• Decorative traverse rod with rings

• Decorative pole with rings

Bottom of ring

• Curtain rod

Top of rod

• Decorative pole

Top of pole

• Decorative pole

Top of pole

• Decorative pole (length does not include fabric above the rod)

Top of pole

February 2019

Inspired Drapes | 43

How to Measure for Shades

Measuring Guidelines

Measuring for an Inside Mount

Inside Mount: Window treatments are installed inside the window casing.

Use a steel tape measure for taking measurements.

1. Measure Depth: See chart below to determine if window casing has enough depth for an inside mount window treatment.

2. Measure Width: Measure the inside width of window casing in three places; record narrowest measurement.

3. Measure Length: Measure the inside length from the top of window casing to the top of the sill in three places; record longest measurement.

Headrail

Molding

Casing

Sill

NOTE: Do not take any deductions for clearance. The manufacturer will take necessary deductions for a perfect fit.

(1) Flush mount includes headrail and fabric and is approximate. This can vary by fabric and shade style.(2) For direct mount, front control shades add 3⁄4" to the mounting depths for clearance of the pleat tabs

and rings. Upturned headrail is direct mount only, mounting brackets are not available.

NOTE: The manufacturer makes no deductions on outside mount installations.

Measuring for an Outside Mount

Outside Mount: Window treatments are installed outside the window casing.

Use a steel tape measure for taking measurements.

1. Determine Headrail Location: Determine if headrail will be on molding or above molding and mark the spot.

2. Measure Width: Measure exact width to be covered; we recommend 11⁄2" overlap on each side of the window (3" total) for optimum light control and privacy; record measurement.

3. Measure Length: Measure exact length to be covered, including desired overlap (typically from 1" above the molding to bottom of sill or apron); record measurement.

11⁄2" 11⁄2"

Headrail

Casing

Sill

Molding

ProposedHeadrail Location

or

ProposedHeadrail Location

Measuring for a Relaxed Roman and Balloon Pleated Shade

Relaxed Roman and Balloon Pleated Shade: Tend to "toe-in" at the bottom; inside mounts or multiple shades on one headrail are not recommended.

Use a steel tape measure for taking measurements.

1. Measure Length: Measure to the short point on the bottom edge.

Fabric Shades Control TypeMinimum Depth Needed for

Inside Mount (inches)Depth Needed for Flush Mount(1)

(inches)

Standard Cord Control 3⁄4 23⁄8

Upturned Headrail(2) 11⁄4 1

Continuous-Loop Lift 3⁄4 31⁄8

Motorized Lift 3⁄4 31⁄8

Cordless See cordless size considerations chart See cordless size considerations chart

February 2019

44 | swfconnect.com

• Pull cords can be on the right or left side of each shade; locating cords opposite of the corner is recommended

• Depending on the angle, some corner shades cannot be raised to the same length

• Horizontal panel alignment between shades cannot be guaranteed• Price as standard shades, no additional surcharge• Headrails will not be mitered• Valances will not be mitered• For bottom up/top down corded shades the corner controls may be hard

to reach

NOTE: The projection (P) distance is needed to correctly calculate deductions for ceiling mount installations where the shades are mounted to clear molding. All projection distances must match for correct deductions to be calculated. For additional windows on bays with up to five sides continue with number progression for center shade sizes (C1, C2, C3, …) and angles (angle C1-C2, angle C2-C3, …) as needed. Measure each bay angle using a protractor or angle finder or use two business cards in each bay corner as illustrated above and fax to customer service. The angle to use between adjacent center bay windows along a straight section of wall is 180° (degrees).

Shades will not raiseto same level

NOTE: Manufacturer will take appropriate deductions for proper fit. DO NOT order as a bay window if you do not want manufacturer to take deductions.

Shades cannot be raised to the same level. Light gap may occur.

How to Measure for Shades

Bay Windows

LR

C1

LC1

L and R: Width of each side window from the corners on the mounting surface to the point you would like to cover.

C1: Width of the center window on the mounting surface from corner to corner.

Angle L-C1: Angle between the (L) and (C1) windows.Angle C1-R: Angle between the (C1) and (R) windows.Projection: If needed for ceiling mount: the depth of

the trim or molding the shade will be mounted above.

Measuring Information: Three-Sided Bay Window

Center (C)

Left

(L)Right (R)

Measure:

Angle L-C1

Business Cards or Index Cards

Angle L-C1 Angle C1-R

Shown without projection.

C1

L

C2

R

L and R: Width of each side window from the corners on the mounting surface to the point you would like to cover.

C1, C2: Width of each center window on the mounting surface from corner to corner.

Angle L-C1: Angle between the (L) and (C1) windows.Angle C1-C2: Angle between the (C1) and (C2) windows.Angle C2-R: Angle between the (C2) and (R) windows. Projection: If needed for ceiling mount: the depth of

the trim or molding the shade will be mounted above.

Projection (P)

Measuring Information: Four-Sided Bay Window

Angle L-C1Angle C2-R

Angle C1-C2

Shown with projection.

February 2019

Inspired Drapes | 45

Mounting Options

Mounting on a Wall or Molding:Measure the width of each window from the corner on the mounting surface (molding or wall) to the point you would like to cover.

Mounting Above the Molding:Measure the width of each window from the corner on the mounting surface to the point you would like to cover.

Projection measurement is the distance needed to clear any molding or obstructions that the shade will be mounted above.

• Corner shades are used to butt two shades together in a corner window• Pull cords can be on the right or left side of each shade; locating cords opposite

of the corner is recommended• Depending on the angle, some corner shades cannot be raised to the

same length• Horizontal panel alignment between shades cannot be guaranteed• Price as standard shades, no additional surcharge• Headrails will not be mitered• Valances will not be mitered• For bottom up/top down corded shades the corner controls will be hard to reach

Left Shade Right Shade

Shades cannot be raised to the same level. Light gap may occur.

NOTE: The projection (P) distance is needed to correctly calculate deductions for ceiling mount installations where the shades are mounted to clear molding. All projection distances must match for correct deductions to be calculated.

NOTE: Manufacturer will take appropriate deductions for proper fit. DO NOT order as a corner shade if you do not want manufacturer to take deductions.

How to Measure for Shades

Corner Windows

Right Corner

LeftCorner

Projection (P)

Right Corner

LeftCorner

February 2019

46 | swfconnect.com

Mounting Options

Outside Mount:1. Measure window width including

molding (see figure 1).2. Add any additional width desired,

especially if hanging curtain panels or sheers under cornice (see figure 2). Round up to the nearest full inch.

3. Recommended 2" minimum clearance on face and sides when mounting over decorative panels (see figure 3).

4. Recommended 1" when mounting over inside mount treatments.

Inside Mount:1. Measure the exact width of the window

opening at the very top of the casing (see figure 4).

2. Measure the exact width of the window opening down from the top, depending on the desired length of the cornice being ordered.

Tips for Getting Started:1. Use a steel tape measure. Measure to the nearest 1⁄8".2. Take measurements at the top of window, as not all windows are perfectly square.3. If ordering cornices for multiple windows, make sure to measure each window individually.

NOTE: Measure twice and document the smaller dimension, as not all window openings are perfectly square. Length options vary by styles; see individual style specification pages.

How to Measure for Cornices

Measuring Guidelines

(figure 1)

Width

(figure 2)

Add Additional Width

Window Width

1

2

(figure 4)

Width

Width

(figure 3)

Face Width of Decorative Panel Hardware

Minimum 2" needed when going over decorative panels

Decorative Panel

Projection

Decorative Panel

Projection

February 2019

Inspired Drapes | 47

How to Measure for Cornices

Premium Fabric-Wrapped Cornices

Measure Notes:• An inside mount cornice has a depth of 3"

(mounting board/dust cover)• Measure depth of window casing to

determine if it will accommodate an inside mount

• Determine inside or outside mount• Face width will be approximately 11⁄2"

wider than the ordered width• Inside mount will be approximately 1⁄2" less

than the ordered width

Fabric-Wrapped Cornices

Measure Notes:• Determine inside or outside mount • Outside mount face width on the curved

cornice will be approximately 21⁄2" wider than the ordered width

• Outside mount face width on the other fabric-wrapped cornice styles will be 11⁄2" wider than the ordered width

• Inside mount will be approximately 1⁄2" less than the ordered width

Inside Mount (side view)Outside Mount (side view)

Outside Mount (side view) Inside Mount (side view)

3⁄4" Thickness

Top View of Cornice Ordered Width

3⁄4" Thickness

Face width will be approximately 11⁄2" wider

OrderedReturnSize

Finished return is ordered return size plus 1⁄2"

Finished return is ordered return size plus 13⁄8" for curved and 5⁄8" for all other fabric-wrapped cornices

Orderedreturnsize

3⁄4" Thickness 3⁄4" Thickness11⁄4" Thickness 11⁄4" ThicknessTop View of Cornice

Ordered WidthTop View of Curved

Cornice Ordered Width

February 2019

48 | swfconnect.com

C1

RL

Angle C1-RAngle L-C1

C1

L

C1R

Business cards Business cards

LC1

Shown without projection.

Angle L-C1

Business Cards or Index Cards

L and R: Width of each side window from the corners on the mounting surface to the point you would like to cover.

C1: Width of the center window on the mounting surface from corner to corner.

Angle L-C1: Angle between the (L) and (C1) windows.Angle C1-R: Angle between the (C1) and (R) windows.

Measure:

Bay and Corner Windows

• Available in linear premium fabric-wrapped cornice• Measure bay angle using protractor or angle finder, or use two business cards in bay corner as illustrated.

• Fabric-wrapped cornices—straight style only• Shown as outside mount with returns• Outside mount projection = return depth• Inside mount—projection is specified by the customer• Excludes curved cornice

Measure:Left Cornice: Width from corner (B) to the outside

desired width (A).Right Cornice: Width from corner (B) to the outside

desired width (C).Projection/Return Depth (P): Depth from wall to back of cornice.Choose Either: Left butt/right bypass (as shown in image)

or left bypass/right butt.

NOTE: Face of cornice will be approximately 3⁄4" greater than the ordered projection/return measurement.

Butt/Bypass—Corner Windows Only

C

P— Projection/ Return Depth

A

B

B

Bypass

Butt

How to Measure for Cornices

February 2019

Sp

ecifi

cati

ons

Insp

ired

Dra

pes

| 49

Dec

ora

tive

Pan

el M

easu

re a

nd In

stal

l Ref

eren

ce G

uid

e

Item

Des

crip

tio

nB

rack

et

Des

crip

tio

nB

rack

et

#R

ing

Des

crip

tio

nR

ing

#

Bac

k H

eig

ht o

f B

rack

et

(inch

es)

1 B

rack

et

Nee

ded

E

very

...

(feet

)

Mea

suri

ngIn

stal

ling

Sty

le o

f D

eco

rati

ve P

anel

Sta

rtin

g P

oin

t o

f D

eco

rati

ve P

anel

O

rder

ed L

eng

th

in R

esp

ect

to

Top

of

Ro

d

Pla

cem

ent

of

Top

S

crew

in R

esp

ect

to T

op

of

Ro

d

(inch

es)

13 ⁄8"

Dec

orat

ive

Pol

e13 ⁄8

" w

ith 3

" cl

eara

nce

9-40

00N

one

Non

e33 ⁄4

4R

od p

ocke

t/gr

omm

et/t

ab0

- 3 ⁄8

13 ⁄8"

Dec

orat

ive

Pol

eW

ood

rin

g w

/eye

let

9-30

00P

leat

ed-

17 ⁄8

13 ⁄8"

Dec

orat

ive

Pol

e13 ⁄8

" w

ith 6

" cl

eara

nce

9-40

01N

one

Non

e43 ⁄4

4R

od p

ocke

t/gr

omm

et/t

ab-

3 ⁄823 ⁄8

" D

ecor

ativ

e P

ole

Woo

d r

ing

w/e

yele

t9-

3000

Ple

ated

- 11 ⁄2

2" D

ecor

ativ

e P

ole

2" a

nd 2

1 ⁄4"

with

3"

cle

aran

ce9-

4002

Non

eN

one

41 ⁄26

Rod

poc

ket/

grom

met

/tab

- 5 ⁄8

2" D

ecor

ativ

e P

ole

Woo

d r

ing

smal

l w/e

yele

t9-

3001

Ple

ated

- 25 ⁄8

2" D

ecor

ativ

e P

ole

Woo

d r

ing

(mat

ches

tra

vers

e rin

g) w

/eye

let

9-30

02P

leat

ed-

31 ⁄82"

Dec

orat

ive

Pol

eW

ood

rin

g rib

bed

w/e

yele

t9-

3003

Ple

ated

- 31 ⁄8

2" D

ecor

ativ

e P

ole

2" a

nd 2

1 ⁄4"

with

6"

cle

aran

ce9-

4003

Non

eN

one

43 ⁄46

Rod

poc

ket/

grom

met

/tab

- 5 ⁄8

2" D

ecor

ativ

e P

ole

Woo

d r

ing

smal

l w/e

yele

t9-

3001

Ple

ated

- 25 ⁄8

2" D

ecor

ativ

e P

ole

Woo

d r

ing

(mat

ches

tra

vers

e rin

g) w

/eye

let

9-30

02P

leat

ed-

31 ⁄82"

Dec

orat

ive

Pol

eW

ood

rin

g rib

bed

w/e

yele

t9-

3003

Ple

ated

- 31 ⁄8

2" D

ecor

ativ

e P

ole

2" a

nd 2

1 ⁄4"

leaf

b

rack

et w

ith

3" c

lear

ance

9-40

04

Non

eN

one

41 ⁄26

Rod

poc

ket/

grom

met

/tab

- 3 ⁄8

2" D

ecor

ativ

e P

ole

Woo

d r

ing

smal

l w/e

yele

t9-

3001

Ple

ated

- 21 ⁄8

2" D

ecor

ativ

e P

ole

Woo

d r

ing

(mat

ches

tra

vers

e rin

g) w

/eye

let

9-30

02P

leat

ed-

27 ⁄82"

Dec

orat

ive

Pol

eW

ood

rin

g rib

bed

w/e

yele

t9-

3003

Ple

ated

- 27 ⁄8

21 ⁄4"

Dec

orat

ive

Pol

e

2" a

nd 2

1 ⁄4"

with

3"

cle

aran

ce9-

4002

Non

eN

one

41 ⁄26

Rod

poc

ket/

grom

met

/tab

- 7 ⁄8

21 ⁄4"

Dec

orat

ive

Pol

eW

ood

rin

g sm

all w

/eye

let

9-30

01P

leat

ed-

25 ⁄821 ⁄4

" D

ecor

ativ

e P

ole

Woo

d r

ing

(mat

ches

tra

vers

e rin

g) w

/eye

let

9-30

02P

leat

ed-

31 ⁄821 ⁄4

" D

ecor

ativ

e P

ole

Woo

d r

ing

ribb

ed w

/eye

let

9-30

03P

leat

ed-

31 ⁄8

21 ⁄4"

Dec

orat

ive

Pol

e

2" a

nd 2

1 ⁄4"

with

6"

cle

aran

ce9-

4003

Non

eN

one

43 ⁄46

Rod

poc

ket/

grom

met

/tab

- 7 ⁄8

21 ⁄4"

Dec

orat

ive

Pol

eW

ood

rin

g sm

all w

/eye

let

9-30

01P

leat

ed-

25 ⁄821 ⁄4

" D

ecor

ativ

e P

ole

Woo

d r

ing

(mat

ches

tra

vers

e rin

g) w

/eye

let

9-30

02P

leat

ed-

31 ⁄821 ⁄4

" D

ecor

ativ

e P

ole

Woo

d r

ing

ribb

ed w

/eye

let

9-30

03P

leat

ed-

31 ⁄8

21 ⁄4"

Dec

orat

ive

Pol

e2"

and

21 ⁄4

" le

af

bra

cket

with

3"

cle

aran

ce9-

4004

Non

eN

one

41 ⁄26

Rod

poc

ket/

grom

met

/tab

- 5 ⁄8

21 ⁄4"

Dec

orat

ive

Pol

eW

ood

rin

g sm

all w

/eye

let

9-30

01P

leat

ed-

23 ⁄821 ⁄4

" D

ecor

ativ

e P

ole

Woo

d r

ing

(mat

ches

tra

vers

e rin

g) w

/eye

let

9-30

02P

leat

ed-

27 ⁄821 ⁄4

" D

ecor

ativ

e P

ole

Woo

d r

ing

ribb

ed w

/eye

let

9-30

03P

leat

ed-

27 ⁄8

3" D

ecor

ativ

e P

ole

3" w

ith 3

" cl

eara

nce

9-40

05N

one

Non

e51 ⁄2

6R

od p

ocke

t/gr

omm

et/t

ab-

3 ⁄43"

Dec

orat

ive

Pol

eW

ood

rin

g w

/eye

let

9-30

04P

leat

ed-

33 ⁄4

Uni

vers

al s

upp

ort

with

3"

cle

aran

ce9-

4006

44

+ 1

3 ⁄8 fr

om

cent

er o

f pol

e

Uni

vers

al s

upp

ort

with

6"

cle

aran

ce9-

4007

44

+ 1

3 ⁄8 fr

om

cent

er o

f pol

e

Regency Collection

Feb

ruar

y 20

19

Sp

ecifi

cati

ons

50 |

swfc

onn

ect.

com

Dec

ora

tive

Pan

el M

easu

re a

nd In

stal

l Ref

eren

ce G

uid

e

Item

Des

crip

tio

nB

rack

et

Des

crip

tio

nB

rack

et

#R

ing

Des

crip

tio

nR

ing

#

Bac

k H

eig

ht o

f B

rack

et

(inch

es)

1 B

rack

et

Nee

ded

E

very

...

(feet

)

Mea

suri

ngIn

stal

ling

Sty

le o

f D

eco

rati

ve P

anel

Sta

rtin

g P

oin

t o

f D

eco

rati

ve P

anel

O

rder

ed L

eng

th

in R

esp

ect

to

Top

of

Ro

d

Pla

cem

ent

of

Top

S

crew

in R

esp

ect

to T

op

of

Ro

d

(inch

es)

1" D

ecor

ativ

e P

ole

Fixe

d w

ith 2

" cl

eara

nce

9-40

20N

one

Non

e31 ⁄8

4R

od p

ocke

t/gr

omm

et/t

ab0

- 5 ⁄8

1" D

ecor

ativ

e P

ole

Rin

g w

/clip

s9-

3011

Ple

ated

- 23 ⁄8

1" D

ecor

ativ

e P

ole

Rin

g w

/eye

let

9-30

10P

leat

ed-

13 ⁄4

1" D

ecor

ativ

e P

ole

Fixe

d w

ith 5

" cl

eara

nce

9-40

21N

one

Non

e31 ⁄8

4R

od p

ocke

t/gr

omm

et/t

ab0

- 5 ⁄8

1" D

ecor

ativ

e P

ole

Rin

g w

/clip

s9-

3011

Ple

ated

- 23 ⁄8

1" D

ecor

ativ

e P

ole

Rin

g w

/eye

let

9-30

10P

leat

ed-

13 ⁄4

1" D

ecor

ativ

e P

ole

Dou

ble

fixe

d w

ith

2" c

lear

ance

bac

k ro

d,

5" c

lear

ance

fron

t ro

d9-

4022

Non

eN

one

34

Rod

poc

ket/

grom

met

/tab

0-

5 ⁄81"

Dec

orat

ive

Pol

eR

ing

w/c

lips

9-30

11P

leat

ed-

23 ⁄81"

Dec

orat

ive

Pol

eR

ing

w/e

yele

t9-

3010

Ple

ated

- 13 ⁄4

1" D

ecor

ativ

e P

ole

Ad

just

able

bra

cket

9-40

23N

one

Non

e2

4R

od p

ocke

t/gr

omm

et/t

ab0

+ 5 ⁄8

1" D

ecor

ativ

e P

ole

Rin

g w

/clip

s9-

3011

Ple

ated

- 23 ⁄8

1" D

ecor

ativ

e P

ole

Rin

g w

/eye

let

9-30

10P

leat

ed-

13 ⁄4

1" D

ecor

ativ

e P

ole

Mou

nted

as

ceili

ng

bra

cket

9-40

24N

one

Non

e3

4R

od p

ocke

t/gr

omm

et/t

ab0

Flus

h w

ith c

eilin

g1"

Dec

orat

ive

Pol

eR

ing

w/c

lips

9-30

11P

leat

ed-

23 ⁄81"

Dec

orat

ive

Pol

eR

ing

w/e

yele

t9-

3010

Ple

ated

- 25 ⁄8

from

cei

ling

1" D

ecor

ativ

e P

ole

Mou

nted

as

wal

l b

rack

et9-

4024

Non

eN

one

34

Rod

poc

ket/

grom

met

/tab

0+

7 ⁄81"

Dec

orat

ive

Pol

eR

ing

w/c

lips

9-30

11P

leat

ed-

23 ⁄81"

Dec

orat

ive

Pol

eR

ing

w/e

yele

t9-

3010

Ple

ated

- 13 ⁄4

1" D

ecor

ativ

e P

ole

Fixe

d w

ith 3

" cl

eara

nce

9-40

30N

one

Non

e21 ⁄4

4R

od p

ocke

t/gr

omm

et/t

ab0

+ 1 ⁄4

1" D

ecor

ativ

e P

ole

Rin

g w

/eye

let

9-30

12P

leat

ed-

15 ⁄8

1" D

ecor

ativ

e P

ole

Fixe

d w

ith 6

" cl

eara

nce

9-40

31N

one

Non

e21 ⁄4

4R

od p

ocke

t/gr

omm

et/t

ab0

+ 1 ⁄4

1" D

ecor

ativ

e P

ole

Rin

g w

/eye

let

9-30

12P

leat

ed-

15 ⁄8

1" D

ecor

ativ

e P

ole

Mou

nted

as

ceili

ng

bra

cket

9-40

32N

one

Non

e2

4R

od p

ocke

t/gr

omm

et/t

ab0

Flus

h w

ith c

eilin

g1"

Dec

orat

ive

Pol

eR

ing

w/e

yele

t9-

3012

Ple

ated

- 43 ⁄8

from

cei

ling

1" D

ecor

ativ

e P

ole

Mou

nted

as

wal

l b

rack

et9-

4032

Non

eN

one

24

Rod

poc

ket/

grom

met

/tab

00

1" D

ecor

ativ

e P

ole

Rin

g w

/eye

let

9-30

12P

leat

ed-

15 ⁄8

Prominence Collection Manhattan Collection

PD

F co

pie

s of

thi

s gu

ide

are

avai

lab

le a

t sw

fcon

nect

.com

Feb

ruar

y 20

19

Inspired Drapes | 51

Fabric Content Label Locations• Decorative panels: header of panel• Shades: bottom hem of shade• Pillows: edge of pillow

Ironing and SteamingThis information is for light touch-ups when installing soft products; most wrinkles will fall out naturally once the product has been hanging for 10-14 days

• It is EXTREMELY important to follow the ironing and steaming guidelines provided on the label• When ironing or steaming a product, you should ALWAYS do this on the back side of the product to avoid marking or

damaging the face of the fabric• When steaming, use a low steam setting and avoid actually touching the fabric with the steamer

1. Fabric content2. Manufacturer identification3. Manufacturer location4. Cleaning instructions5. Iron and steam allowances6. Order #7. Date of Order

Specifications

Installation Information

Steaming Correctly Steaming Incorrectly

1

2

3 4

5

6 7

PDF copies of installation instructions are available at swfconnect.com

February 2019

52 | swfconnect.com

Dressing• Decorative panels: start at the top of the panel and gently dress the folds of the panel down to the bottom hem

Specifications

Installation Information

Dressing Your Panel

PDF copies of installation instructions are available at swfconnect.com

• Shades: smooth the fabric along the pleats or support rods, and raise and lower the shade a few times to make sure the shade is pleating smoothly as it is raised and lowered

February 2019

20-0229-02 (02/19) 18-10691|S18-9722

Inspired Drapes | 53

Decorative Panels: Price Group A, B, C, D, E, and F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Decorative Panels: Options Surcharges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Flat Roman: Price Group A, B, C, D, E, F, and Customer's Own Material (C.O.M.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-59Relaxed and Seamless Roman: Price Group A, B, C, D, E, F, and Customer's Own Material (C.O.M.). . . . . . . . . . . . . . . . . . . 60-62Hobbled Roman and Balloon Pleated: Price Group A, B, C, D, E, F, and Customer's Own Material (C.O.M.) . . . . . . . . . . . . . 63-65Options Surcharges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Premium Fabric-Wrapped Cornices: Arch, Casual, Deco, Linear, Scallop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Fabric-Wrapped Cornices: Contour, Curved, Straight, Traditional. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Accent Pillows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Price Charts

Price Charts: Decorative Panels

Price Charts: Fabric Shades

Price Charts: Cornices

Price Charts: Pillows

Price Charts: Fabric

February 2019

54 | swfconnect.com February 2019

Inspired Drapes | 55

NOTE: Decorative panel option not available in Customer's Own Material (C.O.M.) due to variable fabric widths.

Pinch pleat, back tab, grommet top, and rod pocket styles only. Price is per panel and includes standard lining.

Price Charts: Decorative Panels

Decorative Panels

Price Group D Price Group FPrice Group E

Price Group A Price Group CPrice Group B

February 2019

Length up to (inches)

1W Covers Approx.

20"

2W Covers Approx.

40"

60 $328 583

72 358 684

84 385 709

96 437 832

120 494 921

144 575 996

162 718 1231

180 780 1347

198 836 1463

225 895 1574

Length up to (inches)

1W Covers Approx.

20"

2W Covers Approx.

40"

60 $428 800

72 478 875

84 513 949

96 587 1063

120 678 1233

144 849 1427

162 960 1648

180 1044 1802

198 1118 1958

225 1196 2108

Length up to (inches)

1W Covers Approx.

20"

2W Covers Approx.

40"

60 $404 673

72 434 736

84 466 798

96 518 893

120 598 1037

144 700 1289

162 868 1554

180 944 1700

198 1056 1848

225 1129 1988

Length up to (inches)

1W Covers Approx.

20"

2W Covers Approx.

40"

60 $190 320

72 215 366

84 231 397

96 256 444

120 294 492

144 324 546

162 352 604

180 383 633

198 409 655

225 439 739

Length up to (inches)

1W Covers Approx.

20"

2W Covers Approx.

40"

60 $282 484

72 303 538

84 325 584

96 362 624

120 399 726

144 434 823

162 592 1061

180 644 1160

198 657 1207

225 772 1358

Length up to (inches)

1W Covers Approx.

20"

2W Covers Approx.

40"

60 $243 398

72 266 476

84 287 494

96 318 578

120 351 613

144 412 792

162 466 800

180 476 822

198 497 868

225 546 960

56 | swfconnect.com

Options Pricing: Decorative Panels

Decorative Panels

Options Surcharges

(1) Trim: add trim bottom hem and trim inside edge together for both inside and bottom hem surcharge.(2) Banding: double banding surcharge price for both inside and outside banding.

February 2019

Length up to (inches)

Trim Inside Edge(1), Gimp Inside Inset(1), Banding Inside Edge(2),

or Banding Outside Edge(2)

60 $96

72 117

84 131

96 143

120 179

144 197

162 223

180 248

198 272

225 296

Color Blocking Add 10% to price of drape

Decorative Panel Width 1W 2W

Thermal or Water Repellent Liner $38 76

Flannel-Back Liner 76 154

Blackout Liner 76 154

Trim Bottom Hem 64 112

Grommet 69 136

Inspired Drapes | 57

Price Charts: Fabric Shades

NOTE: Shades to the right of the bold line, wider than 106", will be manufactured as multiple shades on one headrail at no extra charge.

Flat Roman

Price Group A

Price Group B

Price Group C

February 2019

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $254 318 373 465 527 580 716 791 1067 1140 1202

48 291 366 439 515 576 639 845 939 1245 1334 1421

60 347 418 514 590 659 689 1066 1154 1415 1524 1621

72 377 488 564 651 737 788 1175 1295 1590 1706 1824

84 420 538 610 704 784 835 1292 1463 1771 1915 2055

96 454 588 661 762 810 878 1358 1530 1887 2034 2175

108 500 646 728 839 891 963 1495 1683 2079 2240 2392

120 549 712 800 921 981 1061 1643 1851 2286 2462 2632

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $331 414 484 604 685 740 914 1008 1300 1387 1463

48 380 476 571 670 749 816 1079 1197 1516 1624 1729

60 435 524 643 739 824 880 1359 1472 1723 1855 1973

72 472 611 707 814 923 1006 1498 1651 1935 2078 2221

84 535 685 778 896 1000 1064 1647 1865 2156 2331 2502

96 590 764 859 990 1053 1099 1765 1989 2407 2594 2773

108 649 840 947 1091 1159 1205 1944 2188 2651 2856 3051

120 713 925 1039 1197 1274 1329 2136 2407 2915 3140 3357

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $387 480 561 748 849 898 1080 1305 1610 1719 1813

48 445 553 662 829 928 992 1251 1549 1879 2013 2142

60 510 608 746 915 1021 1068 1577 1906 2134 2299 2445

72 553 709 820 1008 1143 1223 1738 2138 2398 2573 2751

84 626 794 902 1110 1239 1293 1910 2415 2671 2888 3099

96 691 886 997 1226 1304 1362 2048 2576 2982 3214 3248

108 760 975 1098 1350 1436 1494 2255 2834 3285 3538 3573

120 884 1095 1206 1482 1578 1645 2478 3118 3612 3890 3932

58 | swfconnect.com

Price Charts: Fabric Shades

NOTE: Shades to the right of the bold line, wider than 106", will be manufactured as multiple shades on one headrail at no extra charge.

Flat Roman

Price Group D

Price Group E

Price Group F

February 2019

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $455 567 664 844 958 1014 1254 1514 1834 1958 2065

48 520 653 783 936 1048 1119 1481 1797 2140 2292 2418

60 597 719 881 1082 1208 1263 1865 2210 2431 2619 2758

72 648 838 970 1192 1351 1446 2055 2480 2732 2931 3103

84 734 940 1067 1314 1466 1529 2259 2802 3042 3290 3497

96 809 1048 1179 1450 1542 1610 2421 2988 3365 3626 3877

108 891 1153 1299 1597 1698 1766 2666 3287 3706 3993 4265

120 998 1269 1427 1752 1867 1945 2931 3616 4076 4389 4692

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $549 686 803 1003 1137 1227 1545 1820 2198 2413 2544

48 629 791 966 1111 1244 1353 1825 2161 2565 2825 3009

60 722 870 1087 1225 1367 1460 2299 2658 2914 3226 3432

72 784 1014 1196 1377 1531 1671 2534 2982 3274 3611 3860

84 889 1137 1316 1517 1693 1766 2784 3368 3645 4054 4349

96 997 1291 1482 1707 1815 1895 2985 3593 4071 4510 4822

108 1099 1422 1633 1880 1999 2079 3287 3953 4484 4968 5305

120 1265 1610 1844 2121 2258 2354 3715 4469 5070 5460 5837

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $582 727 853 1063 1204 1301 1638 1929 2329 2559 2697

48 668 838 1024 1178 1319 1435 1935 2291 2719 2994 3188

60 765 923 1152 1299 1449 1547 2436 2816 3089 3421 3638

72 832 1075 1268 1460 1623 1770 2686 3162 3470 3827 4091

84 942 1204 1394 1609 1793 1872 2951 3571 3864 4298 4610

96 1057 1369 1571 1809 1924 2008 3165 3809 4315 4782 5111

108 1165 1507 1730 1992 2119 2203 3485 4189 4753 5265 5624

120 1341 1706 1955 2247 2394 2495 3938 4739 5375 5787 6186

Inspired Drapes | 59

Price Charts: Fabric Shades

Flat Roman

Customer's Own Material (C.O.M.) Labor Only

NOTE: Shades to the right of the bold line, wider than 106", will be manufactured as multiple shades on one headrail at no extra charge.

February 2019

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $247 309 361 451 511 578 681 803 969 1035 1092

48 283 355 426 499 559 638 805 911 1131 1212 1290

60 324 391 480 551 615 687 1014 1098 1285 1384 1473

72 352 456 527 607 688 786 1118 1232 1444 1550 1657

84 399 511 580 670 746 831 1229 1391 1608 1739 1867

96 440 570 641 739 785 836 1317 1484 1796 1936 2070

108 485 627 706 814 864 899 1450 1632 1978 2131 2276

120 531 691 776 893 951 1010 1594 1796 2176 2343 2505

60 | swfconnect.com

Price Charts: Fabric Shades

NOTE: Shades to the right of the bold line, wider than 106", will be manufactured as multiple shades on one headrail at no extra charge.

Relaxed and Seamless Roman

Price Group A

Price Group B

Price Group C

February 2019

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $206 264 316 405 464 493 631 750 979 1048 1108

48 243 309 380 452 509 549 755 899 1148 1235 1318

60 286 345 433 502 568 593 960 1112 1311 1415 1509

72 313 410 481 558 639 685 1063 1255 1480 1592 1704

84 360 464 533 620 696 728 1172 1385 1608 1741 1873

96 401 523 592 688 734 768 1261 1423 1732 1872 2004

108 446 578 655 763 813 849 1392 1572 1913 2063 2207

120 495 640 724 842 898 938 1534 1731 2108 2273 2434

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $262 344 414 527 609 717 877 975 1192 1301 1348

48 309 401 493 588 668 796 1001 1115 1399 1504 1604

60 364 449 562 652 746 861 1248 1354 1595 1723 1838

72 399 533 625 726 838 995 1382 1527 1801 1938 2074

84 459 603 693 805 914 1057 1524 1732 2013 2179 2343

96 511 680 769 895 964 1114 1638 1851 2253 2433 2606

108 570 752 851 992 1067 1232 1810 2045 2486 2683 2870

120 630 832 942 1094 1179 1361 1994 2252 2740 2956 3163

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $337 441 504 677 758 807 1008 1172 1462 1566 1653

48 397 514 605 754 833 897 1151 1403 1716 1844 1968

60 467 576 691 836 928 969 1434 1737 1958 2113 2254

72 511 623 766 930 1044 1120 1587 1959 2210 2378 2545

84 589 706 850 1032 1137 1190 1751 2222 2469 2673 2874

96 656 797 901 1149 1225 1281 1882 2375 2763 2985 3051

108 730 964 997 1273 1355 1415 2079 2621 3051 3292 3361

120 808 1066 1156 1403 1498 1564 2291 2888 3362 3626 3705

Inspired Drapes | 61

Price Charts: Fabric Shades

NOTE: Shades to the right of the bold line, wider than 106", will be manufactured as multiple shades on one headrail at no extra charge.

Relaxed and Seamless Roman

Price Group D

Price Group E

Price Group F

February 2019

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $377 472 553 792 905 964 1127 1373 1712 1905 2013

48 444 549 663 884 995 1072 1347 1643 1919 2142 2287

60 523 617 756 980 1108 1159 1679 2035 2189 2455 2618

72 574 716 840 1090 1247 1339 1860 2295 2471 2762 2956

84 629 811 931 1209 1359 1422 2052 2603 2761 3105 3339

96 700 916 1035 1345 1435 1501 2204 2781 3090 3467 3642

108 782 1012 1144 1491 1587 1657 2436 3071 3411 3823 4011

120 905 1140 1268 1643 1754 1831 2684 3383 3758 4212 4421

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $465 582 681 935 1067 1138 1390 1725 2111 2364 2451

48 547 678 818 1043 1174 1265 1662 2065 2479 2785 2916

60 646 761 933 1156 1308 1366 2110 2558 2828 3192 3340

72 707 884 1036 1285 1471 1579 2338 2885 3193 3591 3772

84 776 1000 1149 1427 1603 1678 2579 3271 3567 4038 4260

96 881 1150 1301 1619 1725 1804 2770 3496 3993 4423 4737

108 983 1272 1439 1792 1908 1992 3061 3862 4408 4878 5216

120 1170 1473 1638 2031 2168 2264 3468 4371 4857 5373 5751

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $494 606 722 991 1131 1205 1473 1829 2239 2506 2598

48 580 706 866 1106 1244 1341 1761 2189 2629 2952 3091

60 685 791 989 1225 1387 1448 2237 2712 2999 3384 3540

72 750 937 1097 1363 1559 1674 2477 3058 3386 3807 3997

84 862 1058 1218 1512 1699 1779 2733 3467 3782 4280 4515

96 978 1220 1380 1716 1828 1913 2937 3705 4232 4689 5021

108 1092 1348 1526 1899 2022 2113 3245 4093 4672 5170 5529

120 1241 1532 1737 2153 2299 2399 3676 4633 5148 5695 6095

62 | swfconnect.com

Customer's Own Material (C.O.M.) Labor Only

Price Charts: Fabric Shades

Relaxed and Seamless Roman

NOTE: Shades to the right of the bold line, wider than 106", will be manufactured as multiple shades on one headrail at no extra charge.

February 2019

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $203 267 318 401 459 545 636 741 906 970 1026

48 239 311 375 446 504 605 748 847 1065 1143 1220

60 277 348 428 497 562 654 949 1031 1214 1310 1398

72 302 404 475 551 632 757 1051 1162 1370 1474 1578

84 343 450 517 600 675 754 1137 1293 1501 1626 1748

96 382 507 574 668 712 795 1223 1381 1681 1815 1944

108 425 561 634 740 788 839 1350 1525 1855 2002 2142

120 470 621 703 816 872 927 1488 1679 2045 2205 2361

Inspired Drapes | 63

Price Charts: Fabric Shades

NOTES: Shades to the right of the bold line, wider than 106", will be manufactured as multiple shades on one headrail at no extra charge. Balloon pleated style available to 90" width only.

Hobbled Roman and Balloon Pleated

Price Group A

Price Group B

Price Group C

February 2019

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $316 397 472 542 639 680 874 963 1236 1314 1392

48 354 440 525 607 712 750 1036 1142 1436 1544 1642

60 430 530 580 672 786 828 1258 1400 1637 1757 1875

72 465 592 653 745 874 920 1430 1572 1839 1978 2111

84 528 666 722 822 965 1025 1588 1743 2012 2172 2335

96 577 716 801 960 1071 1134 1709 1854 2241 2411 2582

103 637 789 883 1055 1177 1248 1880 2042 2465 2652 2839

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $399 501 596 684 806 875 1136 1251 1577 1676 1775

48 447 556 663 766 898 965 1347 1485 1831 1968 2093

60 543 670 732 848 992 1066 1635 1784 2088 2239 2392

72 586 747 825 940 1103 1183 1859 2004 2344 2522 2690

84 666 840 912 1038 1218 1319 2064 2266 2615 2824 3035

96 728 904 1011 1212 1352 1432 2222 2410 2914 3135 3357

103 827 1026 1147 1371 1560 1655 2444 2655 3204 3448 3690

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $494 598 713 913 1029 1144 1343 1589 2042 2171 2299

48 554 664 792 1022 1146 1263 1563 1887 2371 2549 2711

60 674 800 876 1131 1266 1395 1897 2311 2704 2900 3097

72 727 892 986 1255 1407 1548 2156 2596 3037 3267 3484

84 828 1004 1090 1384 1554 1726 2395 2936 3387 3658 3932

96 903 1080 1208 1617 1725 1910 2577 3122 3775 4060 4348

103 997 1237 1384 1652 1845 1956 2946 3199 3861 4155 4448

64 | swfconnect.com

Price Charts: Fabric Shades

NOTES: Shades to the right of the bold line, wider than 106", will be manufactured as multiple shades on one headrail at no extra charge. Balloon pleated style available to 90" width only.

Hobbled Roman and Balloon Pleated

Price Group D

Price Group E

Price Group F

February 2019

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $563 694 827 1027 1211 1289 1633 1881 2310 2456 2601

48 630 770 920 1151 1350 1423 1813 2231 2682 2883 3067

60 766 928 1016 1312 1535 1617 2200 2732 3059 3281 3503

72 828 1056 1143 1454 1707 1795 2501 3069 3435 3695 3942

84 942 1189 1264 1606 1886 2002 2778 3470 3830 4137 4447

96 1029 1277 1402 1875 2093 2216 2990 3693 4270 4593 4917

103 1114 1381 1545 1845 2060 2185 3290 3641 4394 4729 5063

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $747 856 1021 1280 1509 1606 2106 2038 2618 2834 3003

48 835 950 1134 1435 1683 1774 2324 2418 3039 3329 3541

60 1017 1145 1252 1588 1857 1957 2820 2961 3465 3789 4045

72 1098 1277 1410 1760 2066 2172 3205 3326 3892 4266 4552

84 1248 1439 1558 1944 2281 2423 3560 3761 4339 4776 5135

96 1390 1575 1762 2312 2582 2732 3939 4002 4837 5302 5677

103 1374 1703 1906 2275 2542 2694 4058 4406 5316 5832 6243

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $722 906 1083 1384 1559 1660 2037 2458 3020 3299 3496

48 808 1007 1202 1551 1819 1916 2416 2917 3506 3873 4122

60 983 1215 1327 1716 2007 2115 2933 3571 3998 4409 4707

72 1063 1355 1494 1902 2232 2348 3332 4013 4491 4964 5298

84 1208 1525 1652 2100 2465 2618 3701 4537 5005 5558 5976

96 1345 1669 1867 2498 2788 2952 3984 4826 5580 6171 6607

103 1456 1840 2059 2458 2746 2909 4383 4759 5743 6354 6804

Inspired Drapes | 65

Price Charts: Fabric Shades

Hobbled Roman and Balloon Pleated

Customer's Own Material (C.O.M.) Labor Only

NOTES: Shades to the right of the bold line, wider than 106", will be manufactured as multiple shades on one headrail at no extra charge. Balloon pleated style available to 90" width only.

February 2019

Length up to (inches)

Width up to (inches)

24 36 48 60 72 84 96 108 120 132 144

36 $312 392 468 537 631 673 848 933 1199 1275 1349

48 350 436 519 600 705 742 1005 1107 1393 1497 1561

60 425 524 575 664 778 820 1218 1358 1558 1671 1784

72 459 585 647 736 864 909 1387 1523 1749 1882 2007

84 512 658 715 814 955 1014 1541 1724 1951 2108 2265

96 560 709 792 950 1060 1122 1658 1834 2175 2339 2505

103 617 766 856 1023 1142 1211 1824 1981 2391 2573 2754

66 | swfconnect.com

Price Charts: Fabric Shades

Surcharges apply to all shades. See exceptions listed below on individual styles.

Balloon Pleated Shade Exceptions:Due to the construction of the balloon pleated shade, the following options are not available:• Blackout and thermal liners• Bottom up/top down• Multiple shades on one headrail• Cordless or motorized controls• Valance (front or back)

Options Surcharges

(1) Multiple shades on one headrail over 106" wide have no additional surcharge.

Available for relaxed and seamless Roman only.

February 2019

Width up to (inches) 24 36 48 60 72 84 96 108 120 132 144

Valance by Width, Back Controls $48 72 97 121 145 169 193 217 242 266 290

Thermal or Water Repellent Liner 53 62 66 74 82 88 98 104 112 121 127

Flannel-Back Liner 83 99 106 118 131 140 155 167 178 192 201

Blackout Liner 83 99 106 118 131 140 155 167 178 192 201

Trim on Bottom of Valance Only 64 112 143 160 209 234 255 279 306 351 378

Continuous-Loop Lift $70 per shade

Cordless $90 per shade

Motorized Lift See motorization cost and product reference guide for pricing

Back Valance for Standard Controls $63 per shade

Bottom Up/Top Down $70 per shade

2 on 1 Headrail(1) $70 per shade

3 on 1 Headrail(1) $70 per shade

Cord Management Cleats

Clear: no chargeCord winder: $8Solid brass cleat: $10Antique brass cleat: $5

Length up to (inches)

Banding Inset, Deco Tape Inset,

or Edge

36 $116

48 154

60 193

72 231

84 270

96 308

108 347

120 385

Inspired Drapes | 67

Price Charts: Cornices

Fabric-Wrapped Cornices: Contour, Curved(1), Straight, Traditional

Premium Fabric-Wrapped Cornices: Arch, Casual, Deco, Linear, Scallop

(1) Cord trim included in curved style.(2) Corner window available in straight and linear styles only.

February 2019

Width up to (inches) 40 71 96 120 144

Price Group A $257 442 591 703 930

Price Group B 390 615 784 932 1231

Price Group C 452 680 909 1136 1364

Price Group D 526 790 1055 1318 1507

Price Group E 635 892 1193 1489 1788

Price Group F 614 946 1264 1579 1895

Customer's Own Material (C.O.M.) Labor Only 279 481 644 840 1009

Options SurchargesContrast Welting (contour, straight, and traditional styles only) $31 56 74 94 113

Contrast Fabric (curved style only) 33 54 71 89 107

Railroaded Fabric 10% 10% 10% 10% 10%

Corner Window(2) 15% 15% 15% 15% 15%

Width up to (inches) 40 71 96 120 144 168 190

Price Group A $284 488 650 774 1020 1176 1332

Price Group B 430 664 844 1025 1352 1558 1766

Price Group C 499 742 989 1224 1468 1693 1918

Price Group D 578 854 1137 1420 1621 1869 2120

Price Group E 699 984 1310 1637 1962 2262 2565

Price Group F 677 1042 1388 1735 2080 2398 2718

Customer's Own Material (C.O.M.) Labor Only 308 497 662 827 991 1143 1296

Options Surcharges

Contrast Welting $59 70 84 107 130 154 183

Cord Trim 63 76 90 133 176 218 263

Packaging for Widths Over 144" 83 83 83 83 83 83 83

Railroaded Fabric 10% 10% 10% 10% 10% 10% 10%

Corner Window(2) 15% 15% 15% 15% 15% 15% 15%

Bay Window 20% 20% 20% 20% 20% 20% 20%

68 | swfconnect.com

Price Charts: Pillows

Price Charts: Fabric

Accent Pillows

Fabric

NOTE: Due to stuffing, pillow size may vary.

February 2019

Width up to (inches) 16 x 16 20 x 20 22 x 22 12 x 16 16 x 20

Price Group A $81 89 99 74 81

Price Group B 103 116 128 95 103

Price Group C 125 139 153 114 125

Price Group D 152 167 183 138 152

Price Group E 198 218 239 180 198

Price Group F 208 228 252 189 208

Customer's Own Material (C.O.M.) Labor Only 78 87 95 71 78

Options Surcharges

Welting $29 29 29 29 29

Trim 56 56 56 56 56

5" x 7" Swatches No charge

1⁄2 Yard Memo Sample $32 per sample

Fabric by the Yard See fabric listing

Inspired Drapes | 69

Customer's Own Material (C.O.M.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-72

Flat Roman. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Relaxed Roman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Seamless Roman. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Hobbled Roman. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Balloon Pleated Shade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Premium Fabric-Wrapped Cornices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Fabric-Wrapped Cornices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Accent Pillows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Customer's Own Material

Fabric Features

C.O.M. Yardage Requirements: Fabric Shades

C.O.M. Yardage Requirements: Cornices

C.O.M. Yardage Requirements: Pillows

February 2019

70 | swfconnect.com February 2019

Inspired Drapes | 71

Fabric Features

Customer's Own Material (C.O.M.)

C.O.M. Guidelines• The designer is responsible for fabric and style design choices• Not all fabrics are suitable for all product styles; SWF reserves the right to refuse any C.O.M. material that will not allow us to

manufacture a product that meets our quality standards• All fabric types follow the same special considerations as the Signature Series Inspired Drapes Elements collection• Available product styles and options are the same as the Signature Series Inspired Drapes Elements collection• Please contact customer service if you have questions regarding fabric specific restrictions prior to placing your order

Warranty Information• Five-year "No Questions Asked" warranty does not apply to Customer's Own Material orders • Limited lifetime warranty for Customer's Own Material orders excludes fabric

Understanding Your FabricAll fabric types follow the same special considerations as the Signature Series Inspired Drapes Elements collection.• For a quick reference find a similar fabric in the Signature Series Inspired Drapes Elements collection and check the

pictograms on the back of the swatch• Consider how the fabric will perform in the product style chosen; at times it may be necessary to adjust the selection of

product or fabric• Things to consider:

• How will the fabric hang or drape?• Is the hand of the fabric stiff or soft?• Will it flair due to stiffness?• Is it too loosely woven to hold its shape?• Will it wrinkle or ripple?• Can the fabric be steamed or ironed?• Is the fabric too heavy or bulky, or not heavy enough?

• Combining—fabrics used as accent linings, color blocks, or banding should be the same weight and hand to avoid problems such as puckering and flaring

• Check for bleed through when using contrast lining for cascades• Antique satins, silks, and linens wrinkle easily and will require additional dressing during installation• Natural fibers such as linens and silks can have wider variation in dye lots and slubs due to the natural construction of the

fabric; these are considered inherent and part of the natural beauty of these fabrics, they are not flaws• Tumbled or pre-washed fabrics may have variations in width, patterns, and dye lots that can affect repeat size and pattern

match; additional yardage may be required in these cases• Crinkled or crashed fabrics, due to the processing techniques, may not finish with a crisp appearance; the crinkles may relax

over time creating uneven hems• SWF reserves the right to adjust construction specifications to accommodate fabrics with special considerations; as an

example, heavy weight fabrics may have a single turn header and no miter on the side hem

Special Considerations for Patterned Fabrics• Patterned fabrics, whether woven, printed, or embroidered, are rarely straight or square; depending on the product style,

adjustments will be made to try to minimize the appearance, however we cannot guarantee complete alignment• Scale—take note of the pattern repeat vs. the width and length of your custom product; we center the patterns in

manufacturing; some patterns, stripes, and plaids when centered will finish with the ends not the same in pattern and/or color• Patterns with distinct vertical lines such as stripes are not recommended for swags due to the bias cut• We pattern match all our joining seams; patterns that do not match up at the edge of the fabric may require additional fabric

over what is noted in the yardage requirement charts

C.O.M. Yardage Estimates• Select a window treatment style and size from the Signature Series Inspired Drapes Elements collection• Select your fabric from your fabric vendor• Determine the fabric width and repeat; this can typically be found on the back of the fabric swatch• Find your product in the C.O.M. yardage requirement charts• Based on the size and fabric repeat, estimate your fabric needs • Don't forget to include any optional yardage, trim, or other options that might be needed for your particular window treatment • If you have any questions or concerns, please call SWF customer service for assistance with your estimate; be prepared

to provide specific details about the C.O.M. fabric, including the width, pattern repeat, and color; also, have the required information for the selected style ready for proper calculations

• Estimates may be subject to change once your order is received and reviewed• SWF is not responsible for fabric shortages that can occur due to the type of fabric, pattern placement, or complexity of

the treatment

February 2019

72 | swfconnect.com

Fabric Features

Customer's Own Material (C.O.M.)

Ordering a C.O.M. Product• Estimate the fabric or trim requirements before purchase (see instructions on previous page) • Always order your Signature Series Inspired Drapes Elements soft treatments first • Complete the required order form(s) and email or fax them to SWF customer service • SWF will process your C.O.M. order and email you a confirmation with instructions to place your fabric order

• NOTE: Each C.O.M. order will require a separate confirmation• When placing an order with a fabric vendor provide them with the SWF order number• Include the SWF order number on the outside of your package; this includes fabrics sent directly by you or your fabric vendor

• Manufacturing lead times begin when fabric is received, inspected, and approved for manufacturing• It is important each piece of C.O.M. sent to SWF is labeled clearly to ensure timely processing of your order

• Fabrics must be properly marked, noting the face-side and which direction is up• Each fabric must be rolled on a tube and sealed in plastic; we do not accept flat folded materials, bedding, or used materials• An additional flat fee may be applied to your order if additional processing is required for fabrics that arrive without proper

identification or are not rolled on a tube or require ironing• Orders that are shipped directly from your fabric vendor are your responsibility

• This includes products made in the wrong pattern, color, dye lot, or made inside-out or upside-down• SWF is not responsible for products produced from incorrectly marked fabrics• Correctly labeled C.O.M. is received by SWF and processed through for inspection• Approved materials will be placed into production and shipped within 5 business days• If, for any reason, the fabric does not pass our inspection process, or we find additional yardage is required, SWF will contact

you directly regarding replacement fabric; you will need to contact the fabric vendor for additional fabric and a call tag to return the damaged goods

• If your fabric is miscut or damaged during the production process and needs to be replaced, SWF will cover the cost of new fabric up to a maximum of $25 per yard; in this case, we may ask you to purchase the amount needed and provide a receipt for reimbursement

• IMPORTANT: Your order will be placed on hold until SWF receives new material from the fabric vendor.

February 2019

Inspired Drapes | 73

C.O.M. Yardage Requirements: Fabric Shades

Flat Roman

Standard (Non-Sheer) FabricsChart assumes a 54" fabric width; contact customer service to calculate other widths.Not available with sheers, laces, casement, or outdoor fabrics.

Length up to (inches)

Width up to (inches)

48 90 106(1)

36 2 33⁄4 53⁄448 21⁄4 41⁄2 63⁄460 23⁄4 51⁄2 872 31⁄4 61⁄4 91⁄484 31⁄2 7 101⁄496 4 73⁄4 111⁄2108 41⁄4 81⁄2 123⁄4120 43⁄4 91⁄4 133⁄4

Multiplier 1 2 3Valance 3⁄4 11⁄2 21⁄4

Standard (Non-Sheer) FabricsCharts assume a 54" fabric width; contact customer service to calculate other widths.Not available with sheers, laces, casement, or outdoor fabrics.

Standard (Non-Sheer) FabricsCharts assume a 54" fabric width; contact customer service to calculate other widths.Not available with sheers, laces, casement, or outdoor fabrics.

Above charts do not include repeats.Fabrics with vertical repeat require extra fabric for both the shade and valance. Use the following formula:((fabric vertical repeat x multiplier)/36") = extra yardage requiredtotal yardage = (base yardage + extra yardage) + (valance + extra yardage)

(1) For multiple shades on one headrail, order yardage based on individual shade sizes.

Relaxed Roman

Seamless Roman

Length up to (inches)

Width up to (inches)

Edge Banding48 90 106(1)

36 21⁄4 41⁄4 61⁄4 21⁄448 21⁄2 43⁄4 71⁄4 21⁄260 23⁄4 51⁄2 81⁄4 23⁄472 31⁄4 61⁄4 91⁄4 31⁄484 31⁄2 63⁄4 101⁄4 31⁄296 33⁄4 71⁄2 111⁄4 33⁄4108 41⁄4 81⁄4 121⁄4 41⁄4120 41⁄2 83⁄4 131⁄4 41⁄2

Multiplier 1 2 3 1Valance 3⁄4 11⁄2 21⁄4 3⁄4

Length up to (inches)

Width up to (inches)

Edge Banding48 90 106(1)

36 13⁄4 31⁄4 43⁄4 13⁄448 2 33⁄4 53⁄4 260 21⁄4 41⁄2 63⁄4 21⁄472 23⁄4 51⁄4 73⁄4 23⁄484 3 53⁄4 83⁄4 396 31⁄4 61⁄2 93⁄4 31⁄4

108 33⁄4 71⁄4 103⁄4 33⁄4120 4 73⁄4 113⁄4 4

Multiplier 1 2 3 1Valance 3⁄4 11⁄2 21⁄4 3⁄4

February 2019

74 | swfconnect.com

Balloon Pleated Shade

Standard (Non-Sheer) FabricsChart assumes a 54" fabric width; contact customer service to calculate other widths.Not available with sheers, laces, casement, or outdoor fabrics.

Above chart does not include repeats.Fabrics with vertical repeat require extra fabric for both the shade and valance. Use the following formula:((fabric vertical repeat x multiplier)/36") = extra yardage requiredtotal yardage = (base yardage + extra yardage) + (valance + extra yardage)

Length up to (inches)

Width up to (inches)

26 48 69 90

36 13⁄4 31⁄2 5 63⁄4

48 21⁄4 4 6 8

60 21⁄2 43⁄4 7 91⁄4

72 23⁄4 51⁄2 8 103⁄4

84 31⁄4 6 9 12

96 31⁄2 63⁄4 10 131⁄4

103 33⁄4 71⁄2 11 143⁄4

Multiplier 1 2 3 4

Hobbled Roman

Standard (Non-Sheer) FabricsChart assumes a 54" fabric width; contact customer service to calculate other widths.Not available with sheers, laces, casement, or outdoor fabrics.

Length up to (inches)

Width up to (inches)

48 90 106(1)

36 21⁄4 41⁄2 63⁄4

48 3 53⁄4 81⁄2

60 31⁄2 63⁄4 101⁄4

72 4 8 113⁄4

84 41⁄2 9 131⁄2

96 51⁄4 101⁄4 151⁄4

103 53⁄4 111⁄4 163⁄4

Multiplier 1 2 3Valance 3⁄4 11⁄2 21⁄4

C.O.M. Yardage Requirements: Fabric Shades

(1) For multiple shades on one headrail, order yardage based on individual shade sizes.

February 2019

Inspired Drapes | 75

C.O.M. Yardage Requirements: Cornices

Straight CutNot available with sheers, laces, casement, or outdoor fabrics.

Fabric Railroaded—Fabric is Rotated 90°Not available with sheers, laces, casement, or outdoor fabrics.When selecting to railroad fabric consider pattern direction, scale, and repeat.Patterns should have no or minimal repeat.

Single Cut

Side by Side CutTwo cornices cut side by side based on parameters below.Patterns will not be centered.Patterns should have no or minimal repeat.

Options—Straight Cut and Fabric Railroaded

Width up to (inches) 64 120 174 190

All Styles—6"-10" Length 11⁄2 21⁄4 3 33⁄4

All Styles—11"-21" Length 21⁄4 31⁄4 41⁄4 51⁄4

Self or Contrast Welting—Add 1 11⁄2 2 21⁄4

HR > 20", Add 3⁄4 3⁄4 3⁄4 3⁄4

Multiplier 2 3 4 5

Width up to (inches) 36 64 120 174 190

All Fabrics to 21" Length 21⁄4 3 41⁄2 6 61⁄2

Self or Contrast Welting—Add 1 1 11⁄2 2 21⁄4

HR Multiplier N/A 1 1 1 1

Width up to (inches) 36 64 120 174 190

All Styles up to 13" Length with Maximum 4" Return or Dust Cover 21⁄4 3 41⁄2 6 61⁄2

All Styles up to 11" Length with Maximum 8" Return or Dust Cover 21⁄4 3 41⁄2 6 61⁄2

Self or Contrast Welting—Add 1 1 11⁄2 2 21⁄4

HR Multiplier 1 1 1 1 1

Width up to (inches) 36(1) 64 120 174 190

Cording Trim 41⁄2 6 9 12 13

Above charts do not include repeats.Fabrics with vertical repeat require extra fabric for both the shade and valance. Use the following formula:((fabric vertical repeat x multiplier)/36") = extra yardage required

For fabrics with horizontal repeat greater than 20" add 1 yard of primary fabric

(1) 36" only applies to railroaded cornices.

Premium Fabric-Wrapped Cornices

HR MultiplierRailroaded fabrics with horizontal repeat require extra fabric using the following formula:((fabric horizontal repeat x multiplier)/36") = extra yardage required

February 2019

76 | swfconnect.com

C.O.M. Yardage Requirements: Cornices

Fabric-Wrapped Cornices

Straight, Contour, Traditional

Straight, Contour, Traditional

Straight, Contour, Traditional

Straight CutNot available with sheers, laces, casement, or outdoor fabrics.

Fabric Railroaded—Fabric is Rotated 90°Not available with sheers, laces, casement, or outdoor fabrics.When selecting to railroad fabric consider pattern direction, scale, and repeat.Patterns should have no or minimal repeat.

Single Cut

Side by Side CutUp to two cornices cut side by side for straight, contour, and traditional styles.Up to three cornices cut side by side for curved styles.Patterns will not be centered.Patterns should have no or minimal repeat.

Curved

Curved

Curved

Width up to (inches) 72 126 144

All Styles 1 11⁄2 2

Self or Contrast Welting—Add 3⁄4 1 11⁄4

HR > 20", Add 1⁄2 1⁄2 1⁄2

Multiplier 2 3 4

Width up to (inches) 36 72 126 144

All Fabrics, All Lengths 2 3 41⁄2 5

Contrast Welting—Add 1 1 11⁄2 2

HR Multiplier 1 1 1 1

Width up to (inches) 36 72 126 144

All Styles, All Lengths— Includes Welting 2 3 41⁄2 5

Contrast Welting—Bias Cut 1 1 11⁄2 2

HR Multiplier 1 1 1 1

Above charts do not include repeats.Fabrics with vertical repeat require extra fabric for both the shade and valance. Use the following formula:((fabric vertical repeat x multiplier)/36") = extra yardage required

For fabrics with horizontal repeat greater than 20" add 1 yard of primary fabric

Width up to (inches) 72 126 144

Primary Fabric 1 11⁄2 2

Contrast Fabric 1⁄2 3⁄4 1

Cording Trim 5 8 9

HR > 20", Add 1⁄2 1⁄2 1⁄2

Multiplier 2 3 4

Width up to (inches) 36 72 126 144

Primary Fabric 2 3 41⁄2 5

Contrast Fabric 2 3 41⁄2 5

Cording Trim 3 5 8 9

HR Multiplier 1 1 1 1

Width up to (inches) 36 72 126 144

Primary Fabric 2 3 41⁄2 5

Contrast Fabric 2 3 41⁄2 5

Cording Trim 3 5 8 9

HR Multiplier 1 1 1 1

HR MultiplierRailroaded fabrics with horizontal repeat require extra fabric using the following formula:((fabric horizontal repeat x multiplier)/36") = extra yardage required

February 2019

Inspired Drapes | 77

Accent Pillows

Standard (Non-Sheer) Fabrics*Chart assumes a 54" fabric width; contact customer service to calculate other widths.Not available with sheers, laces, casement, or outdoor fabrics.

Square Rectangle

16" x 16" 20" x 20" 22" x 22" 12" x 16" 16" x 20"

Pillow with Plain Edge 3⁄4 3⁄4 3⁄4 3⁄4 3⁄4

Welting (Self or Contrast) 1 1 1 1 1

Trim Yards 2 21⁄2 23⁄4 13⁄4 21⁄4

Multiplier 1 1 1 1 1

Above charts do not include repeats (see formula at bottom of page for fabrics with repeats).For fabrics with vertical repeat use the following formula:((fabric vertical repeat x multiplier)/36") + base yardage = total yardage needed

*Styles not available in sheers, laces, or casement fabrics.

C.O.M. Yardage Requirements: Pillows

February 2019

78 | swfconnect.com February 2019

20-0229-02 (02/19) 18-10691|S18-9722