cusn12-c - cc483k copper-tin alloy - equivalent, chemical co

European Steel and Alloy Grades / NumbersSteelNumber.com

Home NEW! Price charts Steel numbers Steel and cast iron standards Alloy standards Equivalent grades Search Russian steels About us

YOU HERE: Alloy standards -> Copper - all grades OR Alloy standards -> / EN 1982

CuSn12-C ( CC483K )

Grade : CuSn12-C

Number: CC483K

Classification: Copper-tin alloy

Standard: EN 1982: 2008 Copper and copper alloys. Ingots and castings

Equivalent grades: Go here

Chemical composition % of grade CuSn12-C ( CC483K )A suffix -C is added to the designation to identify material in the form of castings

Fe Si Mn Ni P S Al Cu Pb Zn Sb Sn

max 0.2

max 0.01

max 0.2

max 2

max 0.6

max 0.05 max 0.01 85 - 88.5 max 0.7 max 0.5 max 0.15 11 - 13

Mechanical properties of grade CuSn12-C ( CC483K )

Rm - Tensile strength (MPa) (GS) 260

Rm - Tensile strength (MPa) (GM) 270

Rm - Tensile strength (MPa) (GC) 300

Rm - Tensile strength (MPa) (GZ) 280

Rp0.2 0.2% proof strength (MPa) (GS) 140

Rp0.2 0.2% proof strength (MPa) (GM) 150

Rp0.2 0.2% proof strength (MPa) (GC) 150

Rp0.2 0.2% proof strength (MPa) (GZ) 150

A - Min. elongation at fracture (%) (GS) 7

A - Min. elongation at fracture (%) (GM) 5

A - Min. elongation at fracture (%) (GC) 6

A - Min. elongation at fracture (%) (GZ) 5

Brinell hardness (HBW): (GS) or (GM) 80

Brinell hardness (HBW): (GC) or (GZ) 90

Equivalent grades of grade CuSn12-C ( CC483K )Warning! Only for reference

USA-

GermanyDIN,WNr

FranceAFNOR

EnglandBS

ItalyUNI

SwedenSS

CzechiaCSN

InterISO

C91700 2.1052.012.1052.032.1052.04G-CuSn12GC-CuSn12GZ-CuSn12

CuSn12 PB2 G-CuSn12 CuSn12 423123 CuSn12

Illini Foundry CompanyA Green Sand Foundry Serving Customers forOver 80 Years.

ASTM CUSN12 Steel Grades Aluminium Alloy

CuSn12-C / CC483K Copper-tin alloy - equivalent, chemical composition, properties 03/03/2015

http://www.steelnumber.com/en/steel_alloy_composition_eu.php?name_id=1621#1 1 / 3

http://www.steelnumber.com/index.phphttp://www.steelnumber.com/en/lmecomexpricechart.phphttp://www.steelnumber.com/en/number_en10027_eu.phphttp://www.steelnumber.com/en/standard_eu.phphttp://www.steelnumber.com/en/standard_nonferrous_eu.phphttp://www.steelnumber.com/en/equivalent_grades_eu.phphttp://www.steelnumber.com/en/search_form_eu.phphttp://www.splav-kharkov.com/en/index.phphttp://www.steelnumber.com/en/e_contact.phphttp://www.steelnumber.com/en/standard_nonferrous_eu.phphttp://www.steelnumber.com/en/standard_alloy_all_grades_eu.php?type_id=3http://www.steelnumber.com/en/standard_nonferrous_eu.phphttp://www.steelnumber.com/en/standard_alloy_comparison_eu.php?gostname_id=210

Casting processGS Sand castingGM Permanent mould castingGZ Centrifugal castingGC Continuous castingGP Pressure die casting

Material conditions

R Material condition designated by the minimum value of tensile strength requirement for the product withmandatory tensile strength and elongation requirements

H Material condition designated by the minimum value of hardness requirement for the product withmandatory hardness requirements

Mechanical propertiesRReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite delasticite minimaleRRm Tensile strength / Zugfestigkeit / Resistance a la tractionAA Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimalJ Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

Copper-tin alloy CuSn12-C ( CC483K )Chemical composition of CuSn12-C ( CC483K ). Equivalent grades of CuSn12-C ( CC483K ).

Standards of CuSn12-C ( CC483K ). Properties of CuSn12-C ( CC483K ). Hardness of CuSn12-C ( CC483K ).

European Steel and Alloy Grades / Numbers 2011- 2015 All rights reserved. The contents from this site may not be reproduced. The entire risk as to use of these content is assumed by you the user

Anviloy 1150Drastically Reduce Core Pin Wear. Extract Die CavityHeat Faster.





http://www.liveinternet.ru/click

SteelNumber.comCuSn12-C ( CC483K )

cusn12-c - cc483k copper-tin alloy - equivalent, chemical co

Documents