1

CURRICULUM-VITAE

SALIM ISTYAQ

B.Sc. Engineering (Computer), M.TECH. (Communication & Information Systems) Enrolled in Ph.D.(Computer Engineering) on 28-09-2015 in A.M.U. Aligarh-(U.P.)-India

(University under Central Government of India)

Office Address: Assistant Professor Computer Engineering, University Polytechnic, A.M.U. Aligarh-202002-U.P.(India) Mobile No. +919412563748 Email: saleemishtiyak@gmail.com

Teaching Experience: “16”years & “05”months

1. Currently working as Assistant Professor Computer Engineering, University Polytechnic, Faculty

of Engg & Tech, Aligarh Muslim University, Aligarh-202002-India since 1st June-2004 to till date.

2. Worked as Guest Faculty in Electronics & Communications Engg in Jamia Millia Islamia, New

Delhi-110025 (University under Central Government of India) since 01/02/2003 to 25/05/2004.

3. Foreign Teaching Experience: Worked as Lecturer in Computer Engineering in the Department of

Electrical Engg. El-Mergheb University, Al-Khoms, Libya since 01/11/2009 to 31/08/2010.

Trainer/Coordinator/Co-Coordinator/Organizer :

• Efficient with full skill to impart training to teachers either in English/Hindi language.

• Worked as Co-Coordinator in UGC Sponsored Special Winter School (OP/Refresher Course) from

31.12.08-21.01.09 (21 Days) at UGC Academic Staff College, AMU, Aligarh, India.

• Workshop Organized on the theme “Make in India: Opportunities and Challenges for Engineers”

held on 28/03/2016 at University Polytechnic, AMU, Aligarh.

• Workshop Coordinator in National Workshop (2 Days) on “Cyber Security and Ethical Hacking”,

organized by Geek Technologies in collaboration with IIT Delhi in University Polytechnic, A.M.U.

Aligarh on 1-2 March-2017.

2

Member

* Member of B.O.S. Computer Engineering, University Polytechnic, GLA University, Mathura since July,

2016.

1. Reviewer of International Journal of Computer Science & Systems Biology (IJCSB).

http://www.editorialmanager.com/systemsbiology/default.aspx.

2. Reviewer of ARSEAM (Academic Research In Science, Engineering, Art and Management)

http://www.arseam.com/content/salim-istyaq-amu-aligarh-india.

3. Editorial Board Member in (IJETAE) International Journal of Emerging Technology & Advanced

Engineering (ISSN 2250-2459, ISO 9001:2008 Certified Journal) from May, 2016 onwards.

4. Member of World Academy of Science, Engineering and Technology (WASET) for International

Journal of Computer and Information Engineering from 27 May, 2016.

Publications

(International Journals-15 Papers & IEEE International Conferences-03 Papers)

INTERNATIONAL JOURNALS

1. Towfeeq Fairooz, Salim Istyaq titled as “Performance Evaluation of Complex Electrical Bio-

Impedance from V/I Four Electrode Measurements”, Paper in International Journal of Medical,

Health, Biomedical, Bioengineering and Pharmaceutical Engineering, World Academy of Science,

Engineering and Technology (WASET), Vol:5, 2011-09-29, pp. 441-453, ISSN: 2010-3824, Impact

Factor =2.699, SCOPUS, Peer reviewed and fully Refereed Journal listed in UGC approved list of

Journals (UGC Journal No. 47683).***

2. Salim Istyaq and Aufaq Zargar titled as “Debugging, Advanced Debugging and Runtime

analysis”, Paper in International Journal on Computer Science and Engineering (IJCSE), Vol. 02,

No. 02, 2010, pp. 246-249, ISSN: 0975-3397, Peer reviewed and fully Refereed Journal.

3. Soriful Hoque, Salim Istyaq and Md. Mushir Riaz, titled as “A Clustering Method For seismic

Zone Identification And Spatial Data Mining”, Paper in International Journal of Advanced

Research in Computer Science Engineering and Information Technology (IJARCSEIT), Volume 1,

Issue 2, Sep-2013, pp. 66-88, ISSN NO: 2321-3337, Impact Factor =1.521, Peer Reviewed and fully

Refereed Journal.

4. Salim Istyaq and Lovish Kumar titled as “A New Technique For User Authentication Using

Numeric One Time Password Scheme”, Paper in International Journal of Computer Sciences and

Engineering (IJCSE), Volume-4, Issue-5, pp. 163-165, May-2016, E-ISSN: 2347-2693, Impact

Factor =2.162, Peer Reviewed and fully Refereed Journal, listed in UGC approved list of Journals

(UGC Journal No. 63193).***

5. Salim Istyaq titled as “A New Approach of Graphical Password with Integration of Audio

Signature Combination of Recall and Recognition”, Paper in International Journal of Computer

3

Science Engineering and Information Technology Research (IJCSEITR), ISSN(P): 2249-6831;

ISSN(E): 2249-7943, Vol. 6, Issue 4, Aug 2016, pp. 45-50, Impact factor =7.1293, Peer Reviewed

and fully Refereed Journal.

6. Salim Istyaq titled as “Authentication by Equalizing the Graphical Bars”, Paper in International

Journal of Science and Research (IJSR), ISSN (Online): 2319-7064 Index Copernicus Value (2013):

6.14 | Impact Factor (2015): 6.391, Volume 5, Issue 8, August 2016, pp. 1048-1052, Peer Reviewed

and fully Refereed Journal.

7. Salim Istyaq titled as “Triple Secured Hybrid Authentication Scheme”, Paper in International

Journal of Emerging Technology and Advanced Engineering (IJETAE), ISSN 2250-2459, ISO

9001:2008 Certified Journal, Volume 6, Issue 8, August 2016, pp. 121-127, Impact Factor= 2.324,

Peer Reviewed and fully Refereed Journal, listed in UGC approved list of Journals (UGC Journal

No. 44256).***

8. Salim Istyaq and Khalid Saifullah titled as “A New Hybrid Graphical User Authentication

Technique based on Drag and Drop Method”, Paper in International Journal of Innovative

Research in Computer and CommunicationEngineering (IJIRCCE), ISSN 2320-9801(online), Print

(2320-9798) ISO 3297:2007 Certified Journal, Volume 4, Issue 8, August 2016, pp. 15514-15521,

Impact Factor= 6.577, Peer Reviewed and fully Refereed Journal.

9. Salim Istyaq titled as “Hybrid Authentication System Using QR Code with OTP”, Paper in

International Journal of Computer and Information Engineering (IJCIE), World Academy of

Science, Engineering and Technology (WASET), PISSN:2010-376X, EISSN:2010-3778, Volume 10,

No. 6, 2016, pp. 1194-1197, SCOPUS, Peer Reviewed and fully Refereed Journal listed in UGC

approved list of Journals (UGC Journal No. 47683).***

10. Muhammad Yusuf Khan, Salim Istyaq titled as “Novel Matrices Based on DIT To Substitute DCT”,

Paper published in International Journal of Electronics, Electrical and Computational System

(IJEECS), February 2017, ISSN 2348-117X, Volume 6, Issue 2, pp. 37-40, Peer Reviewed and fully

Refereed Journal, listed in UGC approved list of Journals (UGC Journal No. 48203).***

11. Salim Istyaq and Mohammad Sarosh Umar titled as “Hybrid Authentication by Graphically

Ranking of Lines using Specific Scale”, Paper published in International Journal of Innovations &

Advancement in Computer Science (IJIACS), June 2017, ISSN 2347-8616, Volume 6, Issue 6, pp.

127-135, Peer Reviewed and fully Refereed Journal, listed in UGC approved list of Journals (UGC

Journal No. 47464).***

12. Salim Istyaq and Mohammad Sarosh Umar titled as “Novel Hybrid Authentication by Graphical

Arrangement of Rows and Columns using Specific Scale”, Paper published in International

Journal of Computer & Mathematical Sciences (IJCMS), July 2017, ISSN 2347-8527, Volume 6,

4

Issue 7, pp. 73-83, Peer Reviewed and fully Refereed Journal, listed in UGC approved list of

Journals (UGC Journal No. 43464).***

13. Salim Istyaq and Mohammad Sarosh Umar titled as “Hybrid Authentication Scheme for Graphical

Password Using QR Code and Integrated sound Signature”, Paper in International Journal of

Computer and Information Engineering (IJCIE), World Academy of Science, Engineering and

Technology (WASET), PISSN:2010-376X, EISSN:1307-6892, Volume 12, No. 2, 2018, pp. 111-115,

SCOPUS, Peer Reviewed and fully Refereed Journal listed in UGC approved list of Journals

(UGC Journal No. 47683).***

14. Salim Istyaq, Safwan Al Salaimeh and Amjad Miqdadi titled as “Decomposition Algorithm of The

Model of Electronics Systems for Modeling in Conditions of Distributed Resource”, Paper

published in International Journal of Emerging Technology and Advanced Engineering (IJETAE),

ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 8, Issue 3, March 2018, pp. 29-31,

Impact Factor= 2.324, Peer Reviewed and fully Refereed Journal, listed in UGC approved list of

Journals (UGC Journal No. 44256).***

15. Adalat Muradov, Nazim Hajiyev, Safwan Al Salaimeh, Salim Istyaq titled as “Software Design for

Integrated Computerized Management Systems”, Paper published in The Journal of Economic

Sciences: Theory and Practice(JESTP), ISSN 2220-8739, 24, Volume 75, #1/2018, pp. 4-15, Peer

Reviewed and fully Refereed Journal.

INTERNATIONAL CONFERENCES

1. International Conference IEEE, A.M. Abbas and Salim Istyak, “Multiple Attempt Node-Disjoint

Multipath Routing for Mobile Adhoc Networks”, Proceedings of Third IEEE International

Conference on Wireless and Optical Communication Networks (WOCN), April 11-13, 2006,

Bangalore, India, ISSN- 1811-3923, ISBN No. 1-4244-0340-5/06/$20.00 02006 IEEE, pp.-5.

2. International Conference (IEEE), Soriful Hoque, Salim Istyaq and Md. Mushir Riaz, “A

Hierarchical Approach for Clustering and Pattern Matching of Gene Expression Data”,

Proceedings of Sixth International Conference on Genetic and Evolutionary Computing, August 25-

28, 2012, Kitakyushu, Japan, ISBN NO. 978-0-7695-4763-3/12 $26.00 © 2012 IEEE DOI,

10.1109/ICGEC.2012.16, pp. 413-416.

3. International Conference (IEEE), Salim Istyaq and Mohammad Sarosh Umar, “Encoding

Passwords using QR Image for Authentication”, Proceedings of 2nd International Conference on

Next Generation Computing Technologies (NGCT), October 14-16, 2016, Dehradun, India

(Conference ID-39694). ISBN No. 978-1-5090-3256-3/16/$31.00 ©2016 IEEE, pp. 818-823.

Note: *** indicates paper published in UGC approved /recommended list of journals.

5

Orientation Programme & Refresher Courses

1. UGC Sponsored Orientation Programme from 22.3.06-21.4.06 (One Month) at UGC Academic Staff

College, AMU, Aligarh, India.

2. UGC Sponsored Refresher Course from 18.11.07-08.12.07 (21 Days) at UGC Academic Staff College,

AMU, Aligarh, India.

3. Course on “Communication Skills and Academic Writings” from 20.02.06-1.03.06 at UGC Academic

Staff College, AMU, Aligarh, India.

4. UGC Sponsored Special Winter School (OP/Refresher Course) from 31.12.08-21.01.09 (21 Days) at

UGC Academic Staff College, AMU, Aligarh, India.

5. UGC Sponsored Special Summer School (OP/Refresher Course) from 12.08.14-03.09.14 (21 Days) at

UGC Academic Staff College, AMU, Aligarh, India.

Short Term Courses By UGC Academic Staff College, A.M.U. Aligarh

1. Personality Development and Communication Skills (19 .11.2014 to 25.11.2014)

2. Academic Writing Skills (05.12.2014 to 11.12.2014)

3. Your Health Well Being (15.12.2014 to 21.12.2014)

4. Management of Educational Institutions (16.01.2015 to 22.01.2015)

5. Stress Management (18.03.2015 to 24.03.2015)

6. Academic Writing (05.08.2015 to 11.08.2015)

7. Data Analysis / SPSS & R (09.09.2015 to 15.09.2015)

8. Research Methodology for Research Scholars of Department of Geography (10.12.2015 to

16.12.2015)

9. How to do Social Work (25.10.2017 to 31.10.2017)

10. Language & Literature (06.11.2017 to 08.11.2017)

11. Gender Sensitization (08.02.2018 to 14.02.2018)

6

Workshops Attended

1. Workshop on “Environment and Pollution Awareness” (27 Nov, 2004) organized by AICTE at

University Polytechnic, AMU, Aligarh, India.

2. Workshop on “Blue tooth wireless Technology” (10-11 Feb, 2005) under AICTE Project on

Networking of Appliances through Wireless Communication at Deptt. of Electronics Engg. AMU,

Aligarh, India.

3. Workshop on “Signal Processing Applications in Network Multimedia” (19 March, 2005)

organized by DRS programme, Deptt. of Electronics Engg. AMU, Aligarh, India.

4. Workshop on “Advances in Wireless Networks” (17 Jan, 2006) organized by DRS programme,

Deptt. of Electronics Engg. AMU, Aligarh, India.

5. Workshop on “Advances in Wireless Networks” (17 Jan, 2008) organized by DRS programme,

Deptt. of Electronics Engg. AMU, Aligarh, India.

6. National Seminar attended on “Role of Electronics in the development of Modern Industries”

held on 31/12/2008 organized by Shanti Jankalyan Sansthan, Shahjahanpur, Lucknow.

7. Workshop attended on “Multimedia and Its Applications” held on 21-22/03/2009 at Women’s

Polytechnic, AMU, Aligarh.

8. Workshop attended on “Information Technology-Prospectus & Challenges” held on 14-

15/02/2015 at Women’s Polytechnic, AMU, Aligarh.

9. ***Workshop Organized and attended on “Make in India: Opportunities and Challenges for

Engineers” held on 28/03/2016 at University Polytechnic, AMU, Aligarh.

10. Workshop attended on “Analog IC Design using SCL CMOS Technology” held on 9th Oct. 2016

at Z.H.C.E.T. A.M.U. Aligarh.

11. One day Seminar on “S.O.L.I.D. Principles with JAVA” held on 14th Feb. 2017 at University

Polytechnic, A.M.U. Aligarh

12. Workshop attended on “Introduction To Data Science Using Statistica” held on 6th March, 2017 at

Department of Computer Engineering, Z.H.C.E.T. A.M.U. Aligarh.

13. Workshop attended on “Smart Grid Technologies” held on 13th December, 2017 at Department of

Electrical Engineering, Z.H.C.E.T. A.M.U. Aligarh.

14. One day Seminar on “Energy Conservation and management” held on 14th Dec, 2017 at

Department of Electrical Engineering, A.M.U. Aligarh.

7

15. Workshop attended on “Smart Grid Technologies” held on 13th December, 2017 at Department of

Electrical Engineering, Z.H.C.E.T. A.M.U. Aligarh.

16. Workshop attended on “Research, Writing, and Publishing in High impact Journals” held on 17-

19/08/2018 at Department of Civil & Architecture, AMU, Aligarh.

One Week Short Term Courses / Training Programmes

1. One Week Short term Course on “Local Area Networking” conducted (from 20/10/2004-

23/10/2004) by National Institute for Technical Teachers Training, Chandigarh.

2. One Week Short term Course on “Mobile Computing” (from 10/10/05-14/10/05) conducted by

National Institute for Technical Teachers Training, Chandigarh.

3. One Week Short term Course on “PLC & Its Applications” (from 17/01/2005-21/01/05) conducted

by National Institute for Technical Teachers Training, Chandigarh.

4. One Week Short term Course on “Linux Server Administration” (from 13/11/2006-17/11/2006)

conducted by National Institute for Technical Teachers Training, Bhopal.

5. One Week Short term Course on “Multimedia Technology” (from 22/05/06 –26/05/06) conducted

by National Institute for Technical Teachers Training, Chandigarh.

6. One Week Short term Course on “Repair & Maintenance of UPS & SMPS” (from 13/07/2009 to

17/07/2009) at NITTTR, Chandigarh.

7. One Week Workshop on “Advanced Embedded System” under TEQIP-II (from 29/02/2016 to

04/03/2016) at Department of Computer & Electronics Engineering, Z.H.C.E.T. A.M.U. Aligarh.

8. One Week Workshop on “Big Data and Soft Computing Techniques & Applications” under

TEQIP-II (from 05/10/2016 to 09/10/2016) at Department of Computer Engineering, Z.H.C.E.T.

A.M.U. Aligarh.

9. One Week Training Program on “Nature Inspired Optimization Techniques and Research Paper

Writing using LATEX Software” under TEQIP-II (from 16/03/2017 to 22/03/2017) at Department

of Electrical Engineering, Z.H.C.E.T. A.M.U. Aligarh.

10. One Week Teachers Training Workshop organized by Sir Syed Educational Society (SEMWS)

(from 20/03/2017 to 25/03/2017) at C.G.C. A.M.U. Aligarh.

11. *** Organized One Week Workshop on “Web Development Using PHP” (from 11/09/2017 to

16/09/2017) at Computer Engineering, EES, University Polytechnic, A.M.U. Aligarh.

8

Certificate Courses

1. Certificate Course on “C” Programming of duration: 15/07/1997 to 15/09/1997 from NTG, Aligarh.

2. Certificate Course on “Auto-Cad” of duration: 12/04/2001 to 11/07/2001 from PCC, Aligarh.

University Education

M.TECH.(Communication & Information systems) Passed with approx. 69% marks (First Division) in 2001 from Aligarh Muslim University, Aligarh, India. Dissertation: “An Algorithm For Fault Free Sub cubes In Hypercube Multiprocessor”. Brief Summary: This dissertation attempts to provide strategies to overcome the effects of faulty elements and simulate a fault-free architecture on the faulty system. The problem of determining the number of faulty processors and faulty links in an n-cube such that no m-cube is fault-free is considered. Yang and Tien also used the sub cube portioning technique to effectively achieve the embedding of rings, routing and global operations in faulty hyper cubes. We study how to allocate sub cubes in the faulty hypercube and thus maintain the multitasking capability of the system. By using the sub cubes partitioning techniques , a sub cube is first selected and then the faults in the selected sub cubes are replaced by the fault free neighbours in other sub cubes. We first discuss the allocation with two faults since in the worst case, two faults in an n-cube are sufficient to destroy every possible regular (n-1) cube. The sub cube portioning technique used for a two fault case is also applied to overcome the situation with more than two faults. Finally, we develop a two phase fault tolerant sub cube allocation strategy in the presence of faults. The first phase is the reconfiguration process based on the sub cube portioning technique which finds the set of disjoint sub cubes in a faulty hypercube. The second phase applies an existing fault free sub cube allocation strategy.

B.Sc. Engineering (Computer): Passed with approx. 67% marks (First Division) in 1996 from Aligarh

Muslim University, Aligarh, India.

B.Sc. Engineering (Computer) Project: Project:. “Design Of Adaptive Routing For Distributed Network” Brief Summary: In this project we conclude that message routing in networks directly determine message delays through the network. The objective of a routing algorithm is to deliver messages in the shortest possible time. Routing schemes can be classified as fixed or dynamic, deterministic or adaptive and centralize or distributed however, fixed or deterministic routing strategies, which employ centralized techniques are usually considered for networks with predictable loads. A reliable network should provide alternate routes for message transmission in order to handle such conditions as link or node failure. Reliability is an important consideration for network that is exposed to node or link failures. It can also be important for business considerations. Such as for an airline reservation network requiring 24 hour uninterrupted service. Diploma in Engineering (Electrical): Passed with First Division (Honours) 82.7% marks in 1990 from Aligarh Muslim University, India. Secondary Education Intermediate (XII): 1986 Passed Class XII (Intermediate) from U. P. Board (Allahabad), India with First Division (Honours) 75.6% of marks with distinction in Mathematics, Physics, and Chemistry. Subject studied: English, Hindi, Mathematics, Physics and Chemistry.

9

High School (X): 1984 Passed Class X (High School) from U. P. Board (Allahabad) India with Second Division 57.17% of marks Subjects studied: English, Hindi, Mathematics, Science, Social Science and Biology.

Some of the Theory courses I taught at UG : UG:

➢ Programming In “C” ➢ Basic Electronics ➢ Computer Graphics

Practical Courses:

Courses taught at Diploma in Computer Engg:

Theory Courses:

Practical Courses:

Awards and Scholarships ❑ Recipient of prestigious Scholarship from IDB Saudi Arab for a period of 4 years during B.Sc.

Engg.(Computer).

❑ Recipient of prestigious Scholarship from SST, Aligarh for a period of 2 years. ❑ Award of full fee concession throughout the study in A.M.U Aligarh Research Contributions:

▪ Diploma in computer Engg Projects:

❑ Completed: 50

1. Digital Circuits & Systems

2. Analog Integrated Circuits & Systems

3. Analog Filter & Signal Processing

4. Computer Software Lab.

5. Computer Hardware Lab.

1. Computer Graphics

2. Software Engineering

3. Operating Systems

1. Computer Workshop

2. Programming Lab-III

3. Programming Lab-II

4. Projects in Diploma in Engg (Final Yr. Computer Engg)

10

List of few Projects under my supervision of Diploma in Computer Engg (Final Year)

1. Software Package For Exam Tabulation and Mark sheet of University polytechnic, A.M.U. Aligarh

2. Software Package For Library Information System of University polytechnic, A.M.U. Aligarh 3. Software Package For Time Table For University Polytechnic 4. Website Development For University Polytechnic, A.M.U. Aligarh 5. Software Package For Accounts of Food Craft Institute, A.M.U. Aligarh 6. Software Package For Attendance of University polytechnic, A.M.U. Aligarh 7. “C” Program Modifier 8. File Management in “C” 9. Adaptive Routing for the Distributed system 10. Railway Information System 11. Encyclopaedia to Computers 12. Railway Schedule System 13. Updated Website Development For University Polytechnic, A.M.U. Aligarh 14. Updated Software Package For Library Information System of University polytechnic, A.M.U.

Aligarh 15. PC protection against unauthorized access etc.

Administrative &Allied Duties

1. Appointed as an examiner for Software Lab. (B.Tech., 3 rd Yr.), MIT, New Delhi.

2. Appointed as an examiner for Hardware Lab. (B.Tech., 3 rd Yr.), MIT, New Delhi

3. Appointed as an examiner for Programming Lab. (Dip.In Computer Engg 3 rd Yr.), Jamia Millia

Islamia, New Delhi.

MODROB Prepared proposal for MODROB(Modernization & Removal of Obsolescence)

which was successfully sanctioned by AICTE in 2004-2005.

Tabulator Worked as Tabulator for Diploma in Leather & Footwear Technology in 2006 and

now for Diploma in Computer & Electronics Engg from 2007 to 2009 and again 2010 to till date.

Scrutinizer Working as scrutinizer in Applied Science Section and Electrical engg Section from 2004 to

till date.

Scrutiny Officer Worked as scrutiny officer for admission forms of Diploma in Engg.

Paper Moderator Working as Paper Moderator for Examination of Diploma in Computer/Electronics

Engg.

WARDEN Working as Warden R.M. Hall from 15th July, 2007 to 30 th October, 2009 and

September, 2010 to January, 2011. under supervision of Provost Dr. Mubin Ahmad and remain

under Prof. Nawab Ali khan. (Approx. more than 2 and half years) and 1 year under

supervision of Mr. Azhar Jameel.

11

A.T.P.O. Worked as Assistant Placement Officer for 2 years in University Polytechnic for

Electrical Engg Section which includes four branches e.g. Computer Engg, Electronics Engg,

Electrical Engg and Instrumentation. Again Joined as A.T.P.O. since 2015-16 to till date.

Computer Lab Incharge Working as Computer Lab Incharge of four labs (Three Computer labs

in main building) of University Polytechnic, A.M.U. Aligarh since 2008 to till date.

Tour Incharge Worked as Tour In-Charge in 2006-2008 for Diploma in computer and Electronics

Engg (Final year).

Extra Curricular Activities Teaching at Nodal Centre ,Community Polytechnic about the short term

course of duration of 2 months each “Computer Assembly & Maintenance” more than 1 year.

Syllabi Modification of Diploma in Computer Engg(Final Year) in 2005-2006

1. Computer Graphics(BLC-307)

2. Computer Communication Networks(BLC-302)

3. Operating System & Compiler design(BLC-305)

4. Software Engg (BLC-303)

5. Data Base Management Systems(304)

Syllabi Preparation for Diploma in Computer Engg Semester System in 2012-13

Design of Course structure, Commencement of new theory papers in semester system, New Practical labs

etc.

Course Advisor: Diploma in Computer Engineering for all semesters since 2014-15 to till date.

Project Coordinator: Diploma in Computer Engineering for V and VI semester since August

2015 to till date.

Referees

❖ Dr. Sarosh Umar (Professor, Chairman), Department of Computer Engg., AMU, Aligarh,

India

❖ Dr. Ekram Khan (Professor), Department of Electronics Engg., AMU, Aligarh, India.

12

DECLARATION

I certify that above information is correct and complete to the best of my knowledge.

Place: Aligarh (India) Dated-03-08-2019

(Salim Istyaq)

Assistant Professor

(Computer Engineering)

University Polytechnic

Faculty of Engineering & Technology

A.M.U. Aligarh

Email id: saleemishtiyak@gmail.com

Whatsapp: +919412563748