1

CURRICULUM VITAE

Richard F. Reidy III Department of Materials Science and Engineering

University of North Texas 1155 Union Circle #305310

Denton, TX 76203-5017

EDUCATION Ph.D., Metals Science and Engineering, 1992 Pennsylvania State University, University Park, PA Thesis: Defect Structure and Electronic Behavior in Ceria-Stabilized Zirconia M.S., Metals Science and Engineering, 1988 Pennsylvania State University, University Park, PA Thesis: A Study of Electrical Properties in Polymer-Carbon Composites B.A., Chemistry and Biochemistry, 1983 Rice University, Houston, TX

EMPLOYMENT AND RESEARCH EXPERIENCE Associate Chair, Department of Materials Science and Engineering University of North Texas, Denton TX January 2012- present Professor of Materials Science and Engineering University of North Texas, Denton TX September 2011-present

Discovered a lack of oxidation in atomically sharpened tungsten STM tips- (funded by Zyvex/TEF/DARPA).

Studied the carbothermal reduction of ZrO2 to form ZrC at ultrahigh temperatures (funded by US AFRL).

Collaborated with Zyvex and the University of New South Wales’ effort in quantum computing—characterized single atomic layer doping in silicon and germanium using HRTEM and 3-D atom probe (funded by Zyvex/DARPA).

Developing antibacterial coatings using (magnetic) nickel nanoparticles. Examining the wetting behavior of semiconductor material surfaces at multiple scales

and developing methods of studying wetting during chemical cleaning processes. Interim Chair, Department of Engineering Technology University of North Texas, Denton TX June 2010-December 2011

Initiated an MS program at a regional higher education center in Engineering Management and created a curriculum that permits working professionals to take all course work at this site or on-line.

Organized a state-mandated departmental external evaluation of the Engineering Technology program.

Facilitated the creation of a new departmental strategic plan. Represented ETEC at Homecoming, Preview Day, CENG alumni receptions Chair ETEC search committee for dept chair—wrote letters to key perspective candidates

informing them of the position. The eventual hire had received one of these letters. Chaired search for lecturer and lab manager Started CENG Chair’s Lunch Out

2

Co-proposed with (Kuruvilla John) CENG Mentoring Plan Drafted ETEC Strategic Plan Oversaw Construction Engineering Technology’s successful ABET accreditation

process/visit Successfully nominated two lecturers for promotion Administered the promotion package of a faculty member to full professor Planned and implemented a low-cost renovation of a medium sized classroom (F162) to

accommodate the increasing student numbers in classes permitting more efficient use of large classrooms (F183, F185, F187)

Assigned staff to find or develop new scheduling software for ETEC and CENG—staff member (Gina) worked with CITC and developed new scheduling software that is intended to help increase classroom scheduling efficiency for CENG.

Developed Mentor and Mentee survey forms to monitor the program and look for means to improve interactions and assist mentors in their duties.

Rearranged front offices to provide a more accessible and better-used student tutoring center.

Worked with advising to better predict the class sizes for ENGR classes (still a work in progress)

Director, Texas Governor’s School University of North Texas, Denton TX February 2007-August 2011

Developed and instituted a free three week residential program (55 staff) for high achieving high school students (initial class; 152)—assumed position in February 2007 and program began in June 2007.

Developed a science and technology-based curriculum and schedule (8 hours of instruction each weekday) with evening and weekend enrichment activities

Received $200,000 annual funding from Exxon Mobil Foundation for 2008-2010 ($600,000) after the state cut available funding by 60%.

Associate Professor, Department of Materials Science and Engineering, University of North Texas, Denton, TX May 2004- May 2011

Investigated the nanoscale behavior of tungsten STM tips for atomically precise manufacturing (funded by Zyvex/Texas/DARPA)

Developing high temperature methods to form refractory thermal barrier layers onto carbon-carbon composites (funded by US Air Force Research Laboratory)

Studied wetting behavior of dielectric materials Developed an effective method of monitoring moisture adsorption in porous dielectrics

using D2O and FTIR Received 3 US patents for body armor materials Co-edited a book on wet cleaning of semiconductor materials (published December

2010). Interim Chair, Department of Materials Science and Engineering University of North Texas, Denton TX August 2007-December 2009 Developed several action items to involve freshman and sophomore MTSE students in life at

the research park and enhance retention:

3

o Initiated the adoption of local high schools by each faculty member to create persons of contact for MTSE outreach and recruiting programs and to invite input from local educators about recruitment and materials education.

o Initiated a program of paying for a motel stay for any US undergraduate student interested in joining the MTSE graduate program.

Wrote letters in support of successful tenure and tenure/promotion cases Requested external letters for a tenure and a separate promotion case Brought two new faculty members into the department: assisted initial acclamation both

received NSF funding within their first year (one received a CAREER AWARD, the first in MTSE)

Hired a new faculty member in 2009. Drafted the first MTSE Constitution (edited through two faculty meetings and approved) Rewrote the MTSE Promotion and Tenure document to minimize concern among faculty

about decimal differences in scoring and to bring the document more in line with current MTSE goals.

With the staff, developed annual departmental budgets Assistant Professor, Department of Materials Science, University of North Texas, Denton, TX Jan. 1997- 2004 Developed mechanically-enhanced ultra low-k dielectric constant films for semiconductor

applications Examined the relationship between structure and composition of low-k films with

performance and reliability using ellipsometry, XPS, DSIMS, C-V/I-V measurements Studied ash and etch damage to porous low-k dielectrics Investigated and created new methods of semiconductor processing using supercritical fluids

including photoresist removal, interlayer dielectric drying, post-ash repair of dielectrics, and pore sealing

Senior Scientist Rothe Development, Inc., Armstrong Laboratories, Aberdeen Proving Ground, MD, Jan. 1995- Jan 1997. Synthesized novel silica aerogels and xerogels with organic surface functional groups using

sol-gel techniques. Characterized silica aerogel nanostructures using small angle neutron scattering. Developed ceramic sol-gel coatings for surface acoustic wave (SAW)-based device to detect

nerve agents and fuel gases. Office of Naval Technology Research Fellow Naval Research Laboratory, Washington, D.C., Dec. 1992 - Dec. 1994. Developed thermal barrier coating materials for naval gas turbines (In2O3-Y2O3 and Sc2O3-

Y2O3 zirconias) Studied high temperature corrosion of ceramics in molten sulfate and vanadate salts using x-

ray diffraction and thermogravimetric analysis

4

ACADEMIC ACTIVITIES Courses Taught (*first time taught at UNT, in order of introduction, number of times taught) MTSC 5200 Advanced Concepts in Metallurgical Science* (5) MTSC 5300 Science and Technology of Modern Ceramics (16) PHYS 1220 Physical Science for non-science majors(1) MTSC 5310 Sol-gel Processing* (3) MTSC 6720 Corrosion and Oxidation of Materials* (2) MTSC 6610 Diffraction Science* (1) MTSC 6740 Phase Transformations* (1) MTSE 5520 Physical and Chemical Basis of Integrated Circuits (1) MTSE 4030 Ceramic Science and Engineering*(12) MTSE 3090 Materials Science and Engineering Laboratory I* (1) MTSE 3080 Materials Processing*(12) MTSE 1100 Discover How and Why Materials Matter*(4) Students Graduated Dwayne Morgan (MS-2001) Temeku Technologies, Herndon, VA Jodi Ann Roepsch (MS-2001) Raytheon Corp, McKinney, TX Hanjiang Dong (PhD-2003) Phenomenex, Torrance, CA Zhengping Zhang (PhD 2004) Standard and Poor’s, NY, NY Poonam Kadam (MS (non-thesis)-2004) Sungard, Dallas, TX Rosa Amelia Orozco-Teran*(PhD- 2005) IBM, East Fishkill, NY Pawan Nerusu (MS-2005) Baker Hughes, Stafford, TX Mitali Jain (non-thesis MS-2006) Micron Technology, Lehi, UT Ming-ming Du (non-thesis MS-2008) Dept. of Chemistry, UNT Casey E. Smith (PhD-2008) Texas State University, San Marcos, TX Nelson Martinez (MS-2009) Weber Aircraft, Gainesville, TX Eric Osei-Yiadom (PhD-2010) University of North Texas, Denton, TX Saeedeh Ravandi (MS-2014) Bayer Corporation, Berkeley, CA Anchal Sondhi** (PhD-2014) Tosoh Corporation, Grove City, OH *2005 Dissertation Award Winner **co-advised with Tom Scharf Current Students Advised Oseoghaghare Okobiah PhD 2009-present Jesse Smith PhD 2015-present Joshua Barclay MS/PhD 2015-present Research Scientists Peter Capani (2002-2005) Oncor Electric, Ft. Worth, TX Nora Elizondo (2008-2009, visiting scientist) University of Nuevo Leon, Mexico Nadia Todorova (2013) NCSR (Demokritos), Greece Postdoctoral Advisees Brian Gorman (2000-2002) Associate Professor, Colorado School of Mines Ekaterina Vinogradova (2006-2008) University of Texas at San Antonio

5

David Jaeger (2009-2013) University of North Texas Maia Bischof (2009-2016) Texas Academy of Mathematics and Science (TAMS) David Lin (TAMS 1998) Diana Cheng (TAMS 1998) Heather Downey (TAMS 1998) Rabi Upadhyay (TAMS 1999) Robin Howard (TAMS 2001) Shelley Chang (TAMS 2002) Eugene Chuang (TAMS 2004) Michael Lim (TAMS 2004) David Lim (TAMS 2005) Alison Hendley (TAMS 2005) Alizain Devshi TAMS (2007) David Heller (TAMS 2006 and UNT 2007) Amy Pierce (TAMS 2009) Undergraduate Students Advised Ian McKinnon (2007-2011) Carl Morandi (2009-2011) Cameron Lemons (2012) Tyler Smith (2012-2013) Chance Cooper (2012-2013) Kelsey Lynch (2013-2014) Brian Owens (2013-2014) Jacob Scott (2014-2015) Tammy Tancharoensuksavai (2014-2015) Joshua Barclay (2015) Scott Chambers (2015-16) Nonso Chetuya (2015-16) Tyler Hunt (2016-2018) Thesis/Dissertation Committee Membership Baskar Gopalanarayanan (PhD-Materials Science-1997) Jian-Yue Jin (PhD- Physics-1998) Da Xue (PhD-Materials Science-1998) Bryan Bilyeu (MS-Materials Science-1999) Peter Butzloff (MS-Materials Science-2000) Prakaipetch Punchaipetch (PhD-Materials Science-2000) Syed Maswood (MS-Materials Science-2001) Ajit Ranade (MS-Materials Science-2001)

6

Karl Yoder (MS-Materials Science-2002) Art Palos (MS-Materials Science-2002) John White (MS-Materials Science-2002) Benard Bujard (MS-Materials Science-2002) Ed Sosa (PhD-Materials Science-2003) Alejandro Hernandez-Luna (PhD-Materials Science-2003) Merry Pritchard (PhD- Chemistry 2003) Peter Butzlof (PhD- Materials Science- 2004) Bo Zhou (PhD- Materials Science 2004) Will Strauss (MS- Materials Science 2004) Zhengtao Yang (MS- Materials Science 2005) Cai Tong (PhD- Materials Science and Engineering 2005) Uma Choppali (PhD- Materials Science and Engineering 2006) Emmanuel Ogunsonal (MS- Materials Science and Engineering 2007) Vaishali Ukirde (PhD- Materials Science and Engineering 2007) Haley Hagg-Lobland (PhD- Materials Science and Engineering 2008) Jun Zhou (PhD- Materials Science and Engineering 2009) Madhuri Dutta (MS - Materials Science and Engineering 2009) Ming-Hang Li (PhD- Materials Science and Engineering 2010) Ming-Te Lin (PhD- Materials Science and Engineering 2010) Benedict Mensah (PhD- Materials Science and Engineering 2010) Mohammad Maneshian (PhD- Materials Science and Engineering 2011) Fang Ling-Kuo (PhD- Materials Science and Engineering 2011) Sreekar Marpu (PhD- Materials Science and Engineering 2011) Hamidreza Mohseni (PhD- Materials Science and Engineering 2011) Bed Sharma (PhD- Materials Science and Engineering 2013) Quan Xu (PhD- Materials Science and Engineering 2013) Nikhil Yellakara (PhD- Materials Science and Engineering 2014) Ye Xiang (PhD- Materials Science and Engineering 2014) David Brice (MS- Materials Science and Engineering (2014) Graciela Penso (MS- Materials Science and Engineering (2014) Thomas Cloarec (MS- Materials Science and Engineering (2015) Chong Bo (MS- Materials Science and Engineering (2015) Victor Ageh (PhD- Materials Science and Engineering 2015) Reinaldo Santos-Ortiz (PhD- Materials Science and Engineering 2015) Zachary Hoyt (MS- Materials Science and Engineering 2016) Nelson Martinez (PhD- Materials Science and Engineering 2016) Andres Garcia (PhD- Materials Science and Engineering 2016) John D. Beatty (PhD-Chemistry 2016) Hui Che (PhD- Materials Science and Engineering 2017) Lu Deng (PhD- Materials Science and Engineering 2017) Eforma Justin Egede (MS- Materials Science and Engineering (2017) Phillip Mach (PhD-Chemistry 2017) Srinvas Aditya Mantri (PhD- Materials Science and Engineering 2017)

7

Gustavo Salazar (PhD-Chemistry 2017) RESEARCH AND SCHOLARSHIP ACHIEVEMENTS

Externally Funded Projects (Total: $8.72M; As Sole/lead PI: $4.07M; divided by participation: $4.28M; Educational Funding $1.86M; Research Funding $3.43M )

Title Agency Funding Funding Period

Characterization of Superconducting Thin Film Materials

Superconductor Technologies Inc.

$75,000 2018-2019

Development of Ti2AlC Protective Layers for Glass Molds

Entegris $75,000 Lead PI pending

2018-2019

Atomic Manufacturing, Micron Assembly

Zyvex Labs $160,920 Sole PI

2016-2017

Technical Proposal for Advanced Ballistics Technology Materials Development, Characterization and Computational Modeling Activities

Temple University $3,754,970 (10%-375,497)

Co-PI

2016-2018

Characterization of Superconducting Thin Film Materials

Superconductor Technologies Inc.

$38,026 (25%-$9506)

Co-PI

2016-2018

Engaging Male Colleagues as Advocates & Allies for the Advancement of Women Faculty

North Dakota State $71,040 (20%- $14,208)

co-PI

2015-2018

Supercritical Processing of Nucleating Agents

BLH LLC $26,000 sole investigator

2015

Atomically Precise Fabrication of Qubit Devices

Army Research Office/Zyvex

$371,731 Sole investigator

2013-2016

MRI-R2: Acquisition of an X-Ray Micro-Computed Tomography Apparatus for in situ Three-dimensional Microscopy of Microstructural Evolution of Materials Under Deformation

National Science Foundation

$350,000 co-investigator

2010

Characterization of Surfaces in Semiconductor Materials

Sematech $18,243 sole investigator

2009-2010

Atomically Precise Manufacturing Zyvex/Texas Emerging

Technology Fund/DARPA

$600,000 (+$135,000

match) principal

2009-2013

8

investigator (assumed role

after original PI left)

Texas Governor’s School Texas Higher Education

Coordinating Board

$750,000 sole investigator

2009-2011

Texas Governor’s School Exxon Mobil $200,000 Sole investigator

2009

Integrated Wireless Body Networking for Long-Term Therapeutic and Diagnostic Applications

Metroplex Research

Consortium for Electronic Devices

and Materials

$25,916 co-investigator (total $51,833)

2009

Development of a coating for the controlled-release of novel anti-infective agents against methicillin-resistant Staphylococcus aureus (MRSA)

UNTHSC - UNT Joint Institutional

Seed Research Programs

$12,500 co-investigator

2008

Texas Governor’s School TX Higher Education

Coordinating Board

Austin TX

$200,000 sole investigator

2008

Texas Governor’s School Exxon Mobil $200,000 Sole investigator

2008

Development of the Texas Governor’s School

TX Higher Education

Coordinating Board

Austin TX

$500,000

sole investigator

2007

Implantable wireless oxygen/pressure sensors

Metroplex Research

Consortium for Electronic Devices

and Materials

$30,000 co-investigator (total $60,000)

2007-2008

Fundamental Research of Supercritical Carbon Dioxide Wafer Cleans Technology for Post-Etch Cleans

Sematech, Austin TX

$50,000 sole investigator

2004-2005

Supercritical Processing of Ultra Low-k Films

Sematech Austin TX

$75,000 sole investigator

2003-2004

Nanoscale Characterization and Development of Ultra Low-k

National Science Foundation,

$992,000 lead investigator

2003-2008

9

Dielectric Xerogel Films Ceramics Division Supercritical Processing of Ultra Low-k Films

Sematech Austin TX

$50,000 sole investigator

2002-2003

The Use of Aerogel Film Barriers for Devices

Clarisay Inc, Dallas TX

$12,868 lead investigator

2003

Development of Optimum Liquid Nitrogen Gasification Process for the Cryogenic Vehicle

Civilian Research Defense

Foundation

$18,600 (UNT) ($93,430 total) co-investigator

2002-2003

Supercritical Repair of Low-k Films

Texas Instruments, Dallas TX

$25,000 sole investigator

2002

Characterization of Mesoporous Powders

Royal Body Care, Inc.

$7332 sole investigator

2002

Low-k Organosilicate Glass Films Semiconductor Research

Corporation

$22,178 sole investigator

2001

Formation and Characterization of Calcium Hydroxyapatite Deposited on Silica Aerogels and Xerogels

National Science Foundation, Division of

International Programs,

$9000 sole investigator

2001-2004

Innovative Materials for High Speed Devices

Texas Advanced Technology

Program

$180,000 lead investigator

2000-2002

Patents Impact resistant flexible body device US Patent 7,261,945, P. Biermann, J. Roberts, R. Reidy (2007) Impact resistant flexible body device US Patent 7,413,809, P. Biermann, J. Roberts, R. Reidy (2008) Impact resistant flexible body device US Patent 7,556,855, P. Biermann, J. Roberts, R. Reidy (2009) Process to Produce Nanoparticles, U.S. Provisional Applicant No. 62/583889, Richard Francis Reidy III, John E. Lott, Gerhardt E Wissler, Mark C. Hill (2017) Publications (49 journal articles, 4 book chapters, 26 refereed proceedings, and one book) 1993 1) R.F. Reidy and G. Simkovich, Anomalous Electrical Behavior of Polymer-Carbon Composites as a Function of Temperature, J. Mater. Sci, 28 (1993) 799. 2) R.F. Reidy and G. Simkovich, Electrical Conductivity and Point Defect Behavior in Ceria-Stabilized Zirconia, Solid State Ionics, 62, (1993) 85. 3) R.L. Jones, R.F. Reidy, and D. Mess, Vanadate Hot Corrosion Behavior of India, Yttria-Stabilized Zirconia, J. Am. Ceram. Soc., 76 (1993) 2660. 1994 4) R. L. Jones and R.F. Reidy, A Determination of V2O5 Activity in Corrosive Molten Vanadate-Sulfate Phases, Proceedings of the Tri-Service Conference on Corrosion, Orlando, 1994.

10

5) R.L. Jones and R. F. Reidy, Development of Hot Corrosion Resistant Scandia-Stabilized Zirconia Thermal Barrier Coatings, Proceedings of the Symposium on Elevated Temperature Coatings: Science and Technology I, Rosemont, Illinois, October 2-5, 1994, TMS, Warrendale, Pa. 1995 6) R.F. Reidy and R.L. Jones, Thermogravimetric Analysis of the Reaction of CeO2 with the NaVO3-SO3 System, J.Electrochem. Soc., 142 (1995) 1353. 7) R.F. Reidy and K.E. Swider, Determination of the Cerium Oxidation State in Cerium Vanadate, J. Am.Ceram. Soc. 78 (1995)1121. 1996 8) R.L. Jones, R.F. Reidy, and D. Mess, Interaction of Scandia, Yttria-Stabilized Zirconia with Molten Sodium Metavanadate, Surf. Coat. Technol., 82 (1996) 70. 1998 9) M.C. Plummer, C.P. Koehler, D.R. Flanders, R.F. Reidy and C.A. Ordonez, Cryogenic Heat Engine Experiment,'' Advances in Cryogenic Engineering, Vol. 43 (1998) 1245-1252. 10) M.C. Plummer, C.A. Ordonez, R.F. Reidy, Toward Complete Renewability in Transportation Fuels, Sustainable Communities Review 2, 2 (1998) 13-16. 1999 11) M.C. Plummer, C.A. Ordonez, R.F. Reidy, Liquid Nitrogen as a Non-Polluting Vehicle Fuel Society of Automotive Engineers, Paper No. 1999-01-2517 (1999) 12) O. Mendoza, M.A. Quevedo, R.F. Reidy, H. de la Garza, Mexico in the Context of Market Tendencies for the Ceramic Industry in the XXI Century, Información Tecnológica, 10, 6 (1999) 145-151. 2000 13) R.F. Reidy, M.A. Quevedo-Lopez, R.L. Howard, R.A. Orozco-Teran, A. Hernadez-Luna, R. Upadhyay, O. Mendoza-Gonzalez, H. Dong , The Effect of Nanostructure on the Thermal Behavior of Aerogels, Advances in Cryogenic Engineering, Vol. 46, (2000) 345. 14) M.A. Quevedo-Lopez, O.Mendoza-Gonzalez, R.F. Reidy, R.Ramirez-Bon, R.A. Orozco-Teran, Effect of Energetic Treatments on the Structure and Resistivity of Evaporated MoO3 Films on Cadmium Sulfide Substrates, Journal of Physics and Chemistry of Solids 61, 5 (2000) 727-734. 15) M.A. Quevedo-Lopez, O.Mendoza-Gonzalez, R.F. Reidy, R. Ramirez-Bon, R.A. Orozco-Teran, Enhancement of Photo and Thermochromic Properties of Molybdenum Oxide by a CdS Underlayer, Journal of Materials Science: Materials in Electronics, 11 (2000) 151-155. 16) M.C. Plummer, C.A. Ordonez, R.F. Reidy, Liquid Nitrogen-Powered Vehicles, Proceedings of the International Scientific Conference on Automobile Transport and Road Enterprises on the Threshold of the 3rd Millennium, Paper No. 629.1 (2000) 47-52. 2001 17) R.F. Reidy, S. Krueger, A. Allen, Small Angle Neutron Scattering Characterization of Colloidal and Fractal Aerogels, Journal of Non-Crystalline Solids, 285 (2001) 181. 18) Palos, N.A. D’Souza, C.T. Snively, R.F. Reidy, Modification of Cement Mortar with Recycled ABS, Cement and Concrete Research 31 (2001) 1003.

11

19) B. P. Gorman, Rosa A. Orozco-Teran, Jodi A. Roepsch, Hanjiang Dong and Richard F. Reidy, High Strength, Low Dielectric Constant Fluorinated Silica Xerogel Films, App. Phys. Lett. 79 (2001) 4010-4012. 20) H. Dong, R.A. Orozco-Teran, J. Roepsch, D.W. Mueller, B.P. Gorman, R.F. Reidy, Low Dielectric Constant Functionalized Silica Xerogels, Thin Film Materials, Processes, and Reliability in Microelectronics, Electrochemical Society Symposium Proceedings, 2001 p. 193-203. 21) Richard F. Reidy, B.P. Gorman, Rosa A. Orozco-Teran, Jodi A. Roepsch, Hanjiang Dong, D.W. Mueller, “Processing-mechanical Property Relationships In Ultra-low K Xerogel Films” Proceedings of the Advanced Metallization Conference, 2001 p. 319-323. 22) C.A. Ordonez, M.C. Plummer, R.F. Reidy "Cryogenic Heat Engines for Powering Zero Emission Vehicles". Proceedings of the 2001 ASME International Mechanical Engineering Congress and Exposition, Paper No. IMECE2001/PID-25620. 23) Brian P. Gorman, Rosa A. Orozco-Teran, Jodi A. Roepsch, Dennis W. Mueller and Richard F. Reidy, Low Dielectric Constant Functionalized Silica Gels, MRS Symp. Proc. Vol. 714E (2001) p. L7.17.1-7. 2002 24) Decio Coutinho, ,Rosa A.Orozio-Tevan ,Richard F.Reidy, Kenneth J. Balkus Jr., Further studies of DAM-1mesoporous silica preparations, Microporous and Mesoporous Materials 54 (2002)229 –248 25) Zhengping Zhang, Hanjiang Dong, B.P Gorman, Chun Yao, D.W. Mueller, R.F. Reidy, Synthesis And Characterization Of Hydrophobic Fluorine Doped Silica Films, New Contact Metallurgies and Low-k Interlevel Dielectrics (ed. G.S. Mathad) The Electrochemical Society, PV 2002, p.170, 2003. 26) B.P. Gorman, Shelley Chang, D.W. Mueller, R.F. Reidy, Processing of Ultra Low-k Xerogel Composite Films, Advanced Metallization Conference, ed. B.M. Melnick, T.S. Cale, S. Zaima, T. Ohta, 2002, p. 602- 606. 27) R.F. Reidy, B.P. Gorman, R.A. Orozco-Teran, Zhengping Zhang, Shelley Chang, D.W. Mueller, Effects Of Supercritical Processing On Ultra Low-K Films, Advanced Metallization Conference, ed. B.M. Melnick, T.S. Cale, S. Zaima, T. Ohta, 2002. p. 607-612. 2003 28) Hanjiang Dong, M.H. Lee, R.A. Thomas, Zhengping Zhang, R.F. Reidy, D.W. Mueller, Methyltrimethoxysilane Sol-Gel Polymerization in Acidic Ethanol Solutions Studied by 29Si NMR Spectroscopy, Journal of Sol-Gel Science and Technology 28 (2003) 5-14 29) J. Quintanilla, R.F. Reidy, B.P. Gorman, D.W. Mueller, Gaussian Random Field Models of Aerogels, Journal of Applied Physics 93 (2003) 4584-9. 30) R.F. Reidy, Zhengping Zhang, R.A. Orozco-Teran, B.P. Gorman, D.W. Mueller , Effects of Supercritical CO2 Drying and Photoresist Strip on Low-k Films, MRS Proceedings Vol 766, Materials, Technology, and Reliability for Advanced Interconnects and Low-k Dielectrics,Editors: A. McKerrow, J. Leu, O. Kraft, T. Kikkawa,2003, E6.10 31) R.A. Orozco-Teran, B.P. Gorman, Z. Zhang, D.W. Mueller, and R.F. Reidy, Supercritical CO2 as a Recovery Tool for Low-k Materials, MRS Proceedings Vol 766, Materials, Technology, and Reliability for Advanced Interconnects and Low-k Dielectrics, Editors: A. McKerrow, J. Leu, O. Kraft, T. Kikkawa,2003, E8.20

12

32) Zhengping Zhang, B. P. Gorman, Hanjiang Dong, Rosa A. Orozco-Teran, D.W. Mueller, R.F. Reidy, Polymerization and Cyclization of Dimethyldiethoxysilane by 29Si NMR and FTIR, Journal of Sol-gel Science and Technology 28 (2003) 159-165. 33) B.P. Gorman, D. W. Mueller, R. F. Reidy, Drying and Functionalization of Triethoxyfluorosilane-based Low-k Dielectrics in CO2, Electrochemical and Solid State Letters, 6 (2003) F40-41. 34) N.A. D'Souza, M. Paceley, A. J. Ranade, R. F. Reidy and W. Strauss, Effect of Montmorillonite on Formation of Polystyrene Foams Using Supercritical CO2, Annual Technical Conference of the Society of Plastics Engineers, page 1812 (2003) 35) Will Strauss, Ajit Ranade, Nandika A. D’Souza, Richard F. Reidy, Meaghan Paceley, Preparation and Characterization of Supercritical CO2 Processed Polystyrene Nanocomposite Foams, Society for the Advancement of Material and Process Engineering, ed. L.J. Cohen, C-L Ong, C. Arendt, 48 (2003) 1171-1180. 36) R.F. Reidy, R.A. Orozco-Teran, Zhengping Zhang, Pawan K. Nerusu, P.D. Matz, D.W. Mueller, Supercritical Silylation of Ashed Si-O-C Low-K Films to Limit Changes in Critical Dimensions, Advanced Metallization Conference, ed. G.W. Ray, T. Smy, T. Ohta, M. Tsujimura, 2003, p. 513-518 2004 37) J.A. Roepsch, B.P. Gorman, D.W. Mueller, R.F. Reidy, Dielectric Behavior Of Triethoxyfluorosilane Aerogels, Journal of Non-Crystalline Solids 336 (2004) 53-58 38) E. Munoz, D. Coutinho, R.F. Reidy, A. Zakhidov, W.L. Zhou, K.J. Balkus, Synthesis of DAM-1 molecular sieves containing single walled carbon Nanotubes, Microporous And Mesoporous Materials 67 (2004) 61-65 39) B.P. Gorman, R.A. Orozco-Teran, Z. Zhang, P.D. Matz, D.W. Mueller, and R.F. Reidy, Rapid Repair of Plasma Ash Damage in Low-k Dielectrics Using Supercritical CO2, Journal of Vacuum Science and Technology B, 22, 3 (2004) 1210-1212. 40) Zhengping Zhang, Hanjiang Dong, B.P. Gorman, D.W. Mueller, and R. F. Reidy, Copper Ion Behavior in Silica Xerogels, Journal of Non-Crystalline Solids, 341 (2004) 157-161 41) Hanjiang Dong, B.P. Gorman, Zhengping Zhang, R.A. Orozco-Teran, J.A. Roepsch, D.W. Mueller, M.J. Kim, R. F. Reidy, Reinforcement Mechanism for Mechanically-Enhanced Xerogel Films, Journal of Non-Crystalline Solids, 350 (2004) 345-350. 42) R.F. Reidy, P.K. Nerusu, E.C. Chaung, R.A. Orozco-Teran, P.P. Kadam, P.D. Matz, J.T. Rhoad, E.L. Busch, D.W. Mueller, Supercritical Pore Sealing of Porous MSQ, Advanced Metallization Conference, ed. Darrell Erb, Peter Ramm, 2004, ed. D. Erb, P. Ramm, K. Masu, A. Osaki, p.493-497. 43) P.M. Capani, B.P. Gorman, R.F. Reidy, D.W. Mueller, E.R. Walter, P. D. Matz J.T. Rhoad, E.L. Busch, Drying Methods for Low-κ Films and Their Effects on Dielectric Constants, Advanced Metallization Conference ed. Darrell Erb, Peter Ramm, 2004, ed. D. Erb, P. Ramm, K. Masu, A. Osaki, p.509-513. 2005 44) R.A. Orozco-Teran, B.P. Gorman, D.W. Mueller, M.R. Baklanov, R.F. Reidy,Effect of Silylation on TEFS Xerogel Films by means of Atmospheric Pressure Drying, Thin Solid Films 471 (2005) 145-153. 45) P.D. Matz and R.F. Reidy, Supercritical CO2 Applications in BEOL Cleaning, Solid State Phenomena 103-104 (2005) 315-322

13

46) P.M. Capani, P.D. Matz, D.W. Mueller, M.J. Kim, E.R. Walter, J.T. Rhoad, E.L. Busch, R.F. Reidy, Observation of Intrusion Rates of Hexamethyldisilazane During Supercritical Carbon Dioxide Functionalization of Triethoxyfluorosilane Low-k Films, Materials, Technology and Reliability of Advanced Interconnects, Editors: Paul R. Besser, Andrew J. McKerrow, Francesca Iacopi, C.P. Wong, Joost Vlassak, MRS Proceedings Volume 863, 2005, B2.7 47) Hanjiang Dong, Richard F. Reidy, and John D. Brennan, Shrinkage and Springback Behavior of Methylsilsesquioxanes Prepared by an Acid/Base Two-Step Processing Procedure, Chemistry of Materials, 17, 24 (2005) 6012 – 6017 48) Brian P. Gorman, Dennis Mueller, Oliver Chyan, and R.F. Reidy, Analytical TEM Characterization of Metal Penetration and Supercritical Pore-Sealing of Ash-Damaged Porous Low-k Dielectrics, Advanced Metallization Conference 2005, Colorado Springs, ed. S.H. Brongersma, T.C. Taylor, M. Tsujimura, K. Masu, p. 393-397. 2006 49) C.E. Smith, D.W. Mueller, P.D. Matz, R. F. Reidy, Topographical and chemical surface modification of porous MSQ using silylating agents with different numbers of methoxy groups, MRS Proceedings Volume Materials, Technology, and Reliability of Low-k Dielectrics and Copper Interconnects, ed. T.Y. Tsui, Y.-C Joo, A.A. Volinsky, L. Michaelson, M. Lane, 2006, F04-04. 50) C.E. Smith, M. Du, P.D. Matz, D.W. Mueller, R.F. Reidy, Effect of Low-k Surface Roughness on Subsequent Metal Layers, Advanced Metallization Conference 2006, p. 425-431. 2007 51), J.A. Quintanilla, J.R. Chen, R.F. Reidy, A.J. Allen, Versatility and Robustness of Gaussian Random Fields for Modeling Random Media, Modeling and Simulation in Materials Science and Engineering, 15 (2007) S337 52) H. Dong, Z. Zhang, M-H Lee, D.W. Mueller, R.F. Reidy, Sol-Gel Polycondensation of Methyltrimethoxysilane in Ethanol Studied by 29Si NMR Spectroscopy Using a Two-Step Acid-Base Procedure, Journal of Sol-Gel Science and Technology, 41 (2007) 11-17 53) J Wang, D Cha, PM Matz, CE Smith, DW Mueller, RF Reidy, MJ Kim, TEM-EELS Study on the Ash Damage and Repair of Porous Low-k Films, Microscopy and Microanalysis, 13, S02 (2007) 794-795 54) R.F. Reidy, Can Spin-on or CVD Porous Low-k Films Meet Future Integration Needs?, Future Fab International, 23 (2007) 95-98. 55) Souvik Banerjee, Richard F. Reidy, and Laura B. Rothman, Cryogenic Aerosols and Supercritical Fluid Cleaning, Handbook of Semiconductor Wafer Cleaning Technology, 2nd edition, Editors: Werner Kern, Karen Reinhardt, 2007 2008 56) S. Nasrazadani, V. Paliwal, M. Du, R.F. Reidy, J. Stevens, R. Theimer, Lead adsorption on magnetite at 200°C, Corrosion, 64, 2008, 509-516 57) E. Vinogradova, C.E. Smith, D.W. Mueller, R.F. Reidy, Application of deuterium exchange to analyze moisture uptake characteristics of porous low-dielectric-constant SiOCH films, Electrochemical and Solid-State Letters, 11, 2008, H255-7 58) Ekaterina Vinogradova, Casey E Smith, DW Mueller, Andrew J McKerrow, Rick Reidy, Moisture Adsorption in Plasma-Damaged Porous Low-k Dielectrics Materials and Processes for Advanced Interconnects for Microelectronics, MRS Proceedings Volume 1079E, J. Gambino, S. Ogawa, C.L. Gan, Z. Tokei 1079-N02-09

14

2009 59) E. Vinogradova, E. Osei-Yiadom, C.E. Smith, D.W. Mueller, R.F. Reidy, Effects of plasmas on porous low dielectric constant CVD SiOCH films, Microelectronic Engineering 86, 2, (2009) 176-180 60) J. E. McKeathen, R. F. Reidy, S. K. S. Boetcher, and M. J. Traum, "A Cryogenic Rankine Cycle for Space Power Generation," AIAA Paper Number 2009- 4247, Proceedings of the 41st AIAA Thermophysics Conference, University of Texas – San Antonio, San Antonio, TX, June 22 - 25, 2009. 2010 61) B. P. Gorman, J. B. Ballard, M. Romanes, D. Jaeger, R. Reidy and J. N. Randall, Mediation of Electrostatic Discharge Induced Morphological Damage in Atomically Precise Tips, Microscopy and Microanalysis, 16 S2 , 2010, 480 - 481 2011 62) K.A. Reinhardt, R.F. Reidy, J.A. Marsella, “Surface Phenomena: Rinsing and Drying”, Handbook of Cleaning for Semiconductor Manufacturing: Fundamentals and Applications, Ed. Karen A. Reinhardt and Richard F. Reidy, Scrivener Publishing, 2011, p. 143-166. 63) K.A. Reinhardt, R.F. Reidy, J. Daviot, “Low-k/Cu Cleaning and Drying”, Cleaning for Semiconductor Manufacturing: Fundamentals and Applications, Ed. Karen A. Reinhardt and Richard F. Reidy, Scrivener Publishing, 2011, p. 355-389. 2012 64) Scappucci, Giordano; Klesse, Wolfgang; Hamilton, Alexander; Capellini, G. A. ; Jaeger, David; Bischof, Maia; Reidy, Richard; Gorman, Brian; Simmons, Michelle Y. Simmons, 3D Epitaxial Circuits in Germanium: Stacking of Two-dimensional Electron Gases Probed at the Atomic Level Nano Letters 12 (2012) 4953-4959 65) S.W. Schmucker, N. Kumar, J.R. Abelson, S.R. Daly, G.S. Girolami, M.R. Bischof, D.L. Jaeger, R.F. Reidy, B.P. Gorman, J. Alexander, J.B. Ballard, J.N. Randall, J.W. Lyding, Field-directed sputter sharpening for tailored probe materials and atomic-scale lithography, Nature Communications 3 935 (2012) 1945 2013 66) Anchal Sondhi, Carl Morandi, Richard F. Reidy, Thomas W. Scharf, Theoretical and Experimental Investigations on the Mechanism of Carbothermal Reduction of Zirconia, Ceramics International, 39 (2013) pp. 4489-4497 67) Craig M. Polley, Warrick R. Clarke, Jill A. Miwa, Giordano Scappucci, Justin W. Wells, David L. Jaeger, Maia R. Bischof, Richard F. Reidy, Brian P. Gorman , and Michelle Simmons, Exploring the Limits of N-Type Ultra-Shallow Junction Formation, ACS Nano, 2013, 7 (6), pp 5499–5505 68) Anchal Sondhi, Richard F. Reidy, Thomas W. Scharf, Understanding the mechanism of zirconia to zirconium carbide conversion for ultra-high temperature ceramic applications, Am Ceram Soc. Bulletin 92 (2013) 56 69) K Dimos, MA Antoniou, Ch Tampaxis, FL Kuo, RF Reidy, G. Charalambopoulou, Th A Steriotis, D. Gournis, Synthesis and Characterization of Novel Carbon-based Nanostructures for Hydrogen Storage, 6th Panhellenic Symposium on Porous Materials, Sept 9-10, 2013, Kavala, Greece 70) J.B. Ballard, J.H.G. Owen, E. Fuchs, S. McDonnell, D. Dick, G. Mordi, A. Azcatl, O. Seitz, P. Campbell,J.F. Veyan, Y. Chabal, R.M. Wallace, M. Bischof, D. Jaeger, R. Reidy, N. Sarkar,

15

J.N. Randall, Atomically-Precise Three Dimensional Top Down Fabrication, IEEE 17th Annual Conference on Solid State Sensor, Actuators, and Micro-systems, p. 764-767, 2013 2014 71) T.S. Smith, K.M. Lynch, C.M. Cooper, O. Okobiah, E. Osei-Yiadom, M. Bischof, A. Kouloumpis, M. Baikousi, K. Dimos, R.F. Reidy Wetting behavior of plasma treated low-k films in dHF cleans solutions Microelectronic Engineering 128 (2014) 79-84 72) A. Sondhi, O. Okobiah, S. Chattopadhyay, T. Shibata, T. W. Scharf and R. F. Reidy, X-ray absorption spectroscopy studies on the carbothermal reduction reaction products of 3 mol% yttria-stabilized zirconia, Journal of Applied Crystallography 47 (2014) 1512-1519 73) J.B. Ballard, J.H. G. Owen, W. Owen, J.R. Alexander, E. Fuchs, J.N. Randall, J.R. Von Ehr, S. McDonnell, D.D. Dick, R.M. Wallace, Y.J. Chabal, M.R. Bischof, D.L. Jaeger, R.F. Reidy, J. Fu, P. Namboodiri, K. Li, R.M. Silver, Pattern transfer of hydrogen depassivation lithography patterns into silicon with atomically traceable placement and size control, J. Vac. Sci. Technol. B 32, (2014) 041804 2015 74) J.B. Ballard, D.D. Dick, S.J. McDonnell, M. Bischof, J. Fu, J.H.G. Owen, W.R. Owen, J.D. Alexander, D.L. Jaeger, P. Namboodiri, E. Fuchs, Y. J. Chabal, R.M. Wallace, R. Reidy, J.N. Randall, J. Von Her, Atomically Traceable Nanostructure Fabrication, J. Vis. Exp. (101), e52900, doi:10.3791/52900 (2015) 75) M. D. Harris, W. J. Grogg, A. Akoma, B. J. Hayes, R. F. Reidy, E. F. Imhoff, P. C. Collins, Revisiting (Some of) the Lasting Impacts of the Liberty Ships via a Metallurgical Analysis of Rivets from the SS ‘‘John W. Brown’’, JOM, Vol. 67, No. 12, (2015) 2965-2975 2016 76) Oseoghaghare Okobiah, R.F. Reidy, Surface Interactions: Functionalization of Graphene Oxide and Wetting of Graphene Oxide and Graphene, Current Organic Chemistry, 20, (2016) 674-681. 77) D.A. Brice, P. Samimi, I. Ghamarian, Y. Liu, R.M. Brice, R.F. Reidy, J.D. Cotton, M.J. Kaufman, P.C. Collins, Oxidation behavior and microstructural decomposition of Ti-6Al-4Vand Ti-6Al-4V-1B sheet, Corrosion Science 112 (2016) 338-346 2017 78) D.A. Brice, P. Samimi, I. Ghamarian, Y. Liu, M.Y. Mendoza, M.J. Kenney, R.F. Reidy, M. Garcia-Avila, P.C. Collins, On the eutectoid transformation behavior of the Ti-Zn system and its metastable phases, Journal of Alloys and Compounds, 718 (2017) 22-27 2018 79) J.D. Barclay, O. Okobiah, L. Deng, T. Sendphanlaya, J. Du, R.F. Reidy, High temperature water as a clean and etch for low-k and SiO2 films, Microelectronic Engineering 196 (2018) 54-58 80) R.F. Reidy, J.M. Lauerhaas, Cryogenic Aerosols, and Supercritical Fluid Cleaning and Surface Conditioning, Handbook of Silicon Wafer Cleaning, 3rd Edition, 457-502, 2018. Books Edited Handbook of Cleaning for Semiconductor Manufacturing: Fundamentals and Applications, Ed. Karen A. Reinhardt and Richard F. Reidy, Scrivener Publishing, 2011. Presentations (since 2001): (15 invited presentations at national and international conferences and symposia)

16

2001 1) "Low Dielectric Constant Functionalized Silica Gels", B.P. Gorman, R.A. Orozco-Teran, J.A. Roepsch, D.W. Mueller, R.F. Reidy, Materials Research Society Symposium on Materials, Technology, and Reliability for Advanced Interconnects and Low-K Dielectrics, San Francisco, April 18, 2001 (poster). 2) "Functionalized Silica Xerogels for Low-k Applications", R.F. Reidy, B.P. Gorman, R.A. Orozco-Teran, J.A. Roepsch, D.W. Mueller, Texas Instruments (invited) May 14, 2001 3) “Development of Ultra-low k Dielectrics with Enhanced Mechanical Properties”, ", R.F. Reidy, D.W. Mueller, B.P. Gorman, R.A. Orozco-Teran, J.A. Roepsch, H. Dong, International SEMATECH (invited) June 18, 2001. 4) “Supercritical CO2 Drying as a Clean and Water Removal Process for Ultra-low k Interlayer Dielectrics”, R.F. Reidy, Texas Instruments (invited), Sept 17, 2001. 5) “Processing-Mechanical Property Relationships In Ultra-Low K Xerogel Films”, Richard F. Reidy, B.P. Gorman, Rosa A. Orozco-Teran, Jodi A. Roepsch, Hanjiang Dong*, D.W. Mueller, Advanced Metallization Conference, Montreal, Canada, October 10, 2001, (poster). 6) “Application of Silica Aerogels for Thermoelectric Applications”, R.F. Reidy and B.P Gorman, Marlow Industries (Invited) November 14, 2001. 7) ”Development of Ultra Low-k Interlayer Dielectrics,” R. F. Reidy, B. P. Gorman, J. A. Roepsch*, R.A. Orozco-Teran, H. Dong, Z. Zhang, and D. W. Mueller, Texas Tech University (invited), November 16, 2001 2002 8) “Supercritical Processing at the University of North Texas”, R.F. Reidy, B.P. Gorman, D.W. Mueller, Zhengping Zhang, Rosa A. Orozco-Teran, International SEMATECH, Austin TX March 8, 2002, (Invited). 9) “Effects of Supercritical Processing on Ultra Low-k Dielectric Films”, R.F.Reidy, B.P. Gorman, D.W. Mueller, Aman Zhang, Rosa Orozco-Teran, SEMATECH Wafer Cleaning and Surface Preparation Workshop, Austin, TX, May 21, 2002 (Invited). 10) “Supercritical Drying and Repair of Ultra Low- k Films”, R. F. Reidy, B. P. Gorman, D. W. Mueller, A. Zhang, R.A. Orozco- Teran, Semiconductor Research Corporation Engineering Research Center for Environmentally Benign Semiconductor Manufacturing, June 13, 2002 11) “Reaction Kinetics And Models For Hydrolysis And Polycondensation Of Methyl-Functionalized Alkoxides”, Zhengping Zhang, Hanjiang Dong, B.P. Gorman, D.W. Mueller, R.F. Reidy, XIII International Symposium on Organosilicon Chemistry, Guanajuato City, Mexico, August 25-30, 2002. 12) “Effects of Supercritical Processing on Ultra Low-k Dielectric Films”, R.F. Reidy, B.P. Gorman, R.A.Orozco-Teran, Zhengping Zhang, Shelley Chang, D.W. Mueller, Advanced Metallization Conference, San Diego, CA October 1-3, 2002 13) “Processing of Ultra-Low K Xerogel Composite Films,” B.P. Gorman, Shelley Chang, D.W. Mueller, R.F.Reidy, Advanced Metallization Conference San Diego, CA October 1-3, 2002 14) “Synthesis And Characterization Of Hydrophobic Fluorine Doped Silica Films,” Zhengping Zhang, Hanjiang Dong, B.P Gorman, Chun Yao, D.W. Mueller, R.F. Reidy, Electrochemical Society Symposium on Copper Interconnects, New Contact Metallurgies and Low-K Interlevel Dielectrics, Salt Lake City UT October 23, 2002

17

15) “Silylation Reactions of Ultra Low-k Dielectric Films” (Invited), R.F. Reidy, B.P. Gorman, R.A.Orozco Teran, Zhengping Zhang, Shelley Chang, D.W. Mueller, Texas Instruments, Dallas TX, October 31, 2002 16) “Supercritical Processing of Ultra Low-k Dielectric Films” (Invited), R.F. Reidy, B.P. Gorman, R.A.Orozco-Teran, Zhengping Zhang, Shelley Chang, D.W. Mueller, The First International Surface Cleaning Workshop, Boston MA, November 11-12, 2002 (invited) 2003 17) “Scattering and Modeling Methods to Characterize Porous Materials”, Rick Reidy, UNT Probability Seminar, March 7 , 2003 (Invited) 18) “Supercritical CO2 as a Recovery Tool for Low-k Materials”, MRS Symposium on Materials, Technology, and Reliability for Advanced Interconnects and Low-k Dielectrics, R.A. Orozco-Teran, B.P. Gorman, Z. Zhang, D.W. Mueller, and R.F. Reidy, San Francisco, CA, April 24, 2003. 19) “Effects of Supercritical CO2 Drying and Photoresist Strip on Low-k Films,” R.F. Reidy, Zhengping Zhang, R.A. Orozco-Teran, B.P. Gorman, D.W. Mueller, MRS Symposium on Materials, Technology, and Reliability for Advanced Interconnects and Low-k Dielectrics, San Francisco, CA, April 24, 2003 (poster) 20) “Supercritical Processing of Porous MSQ Films,” R.F. Reidy. B.P. Gorman, R.A. Orozco-Teran, Z. Zhang, D.W. Mueller, Sematech Wafer Cleaning and Surface Preparation Workshop, Austin, TX, May 1-2, 2003 21) “Supercritical Processing and Characterization of Low-k Interlayer Dielectrics and Photoresist Layers”, Rick Reidy, R.A. Orozco-Teran, Z. Zhang. D.W. Mueller, Texas Instruments, August 21, 2003 (invited) 22) “Current Research and Future Investigations on SC-CO2 Processes and Low-k Dielectrics” Rick Reidy, R.A. Orozco-Teran, Z. Zhang, D.W. Mueller, Tokyo Electron USA, Austin TX, September 23, 2003 (Invited) 23) “Supercritical Silylation of Low-k Interlayer Dielectrics and SC-Removal of Photoresist Layers” Rick Reidy, R.A. Orozco-Teran, Z. Zhang, D.W. Mueller, SEMATECH International, Austin TX, September 24, 2003 (Invited) 24) “Supercritical Silylation of Ashed Si-O-C Low-k Films to Limit Changes in Critical Dimensions”, R.F. Reidy, R.A. Orozco-Teran, Zhengping Zhang, P.D. Matz, D.W. Mueller, Advanced Metallization Conference, Montreal, CA, October 21-23, 2003 25) “Reinforcement Mechanism for Mechanically-Enhanced Xerogel Films, Hanjiang Dong, B.P. Gorman,” Zhengping Zhang, R.A. Orozco-Teran, J.A. Roepsch, D.W. Mueller, M.J. Kim, R. F. Reidy, Seventh International Symposium on Aerogels, Alexandria, VA, November 3-5, 2003 26) “Effects of Ash, Etch, and Silylation Processes on Organosilicate Glass Low-k Films” R.F. Reidy, R.A. Orozco-Teran, Zhengping Zhang, P.K. Nerusu, D.W. Mueller,The First International Surface Cleaning Workshop, Boston MA, November 11-12, 2002 27) “Supercritical Silylation of Ash-damaged Low-k ILD Films and SC-Removal of 193nm Photoresist Layers”, Rick Reidy, R.A. Orozco-Teran, P.K. Nerusu, Z. Zhang, D.W. Mueller, SEMATECH EAGMeeting, November 20, 2003 (Invited) 2004

18

28) “Supercritical Repair of Ash-damaged Low-k Films”, Rick Reidy, D.W. Mueller, R.A. Orozco-Teran, Z. Zhang, P. Kadam, P. Nerusu, B.P. Gorman, Sematech Wafer Clean and Surface Preparation Symposium, May 6-7, 2004 29) “Supercritical Repair of Ash-damaged Low-k Films”, Rick Reidy, D.W. Mueller, R.A. Orozco- Teran, Z. Zhang, P. Kadam, P. Nerusu, P.M. Capani, B.P. Gorman, SEMATECH Etch Advisory Group May 17, 2004 (invited) 30) “Nanoscale Characterization and Development of Ultra Low-k Dielectric Xerogel Films,” R.F. Reidy, D.W. Mueller, M.J. Kim, Texas Instruments, Dallas, TX August 31, 2004, (invited) 31) “Supercritical CO2 Applications in BEOL Cleaning,” P.D. Matz, R.F. Reidy, Seventh International Symposium on Ultra Clean Processing of Silicon Surfaces, Brussels, Belgium, September 20-22, 2004, (invited) 32) “Ash-Damage and Development of Supercritical Methods to Remediate Processing Effects in Low-k Films”, R.F. Reidy, P.D. Matz, R.A. Orozco-Teran, P.M. Capani, P. Nerusu, P. Kadam, D.W. Mueller, 3rd International Surface Cleaning Workshop, Boston, MA, Oct 5-6, 2004 (invited) 33) “Supercritical Pore Sealing of Porous MSQ”, R.F. Reidy, P.K. Nerusu, E.C. Chaung, R.A. Orozco- Teran, P.P. Kadam, P.D. Matz, J.T. Rhoad, E.L. Busch, D.W. Mueller, Advanced Metallization Conference, San Diego, Oct 19-21, 2004 34) “Drying Methods For Low-κ Films and their Effects on Dielectric Constants,’ P.M. Capani, B.P. Gorman, R.F. Reidy, D.W. Mueller, P.D. Matz, J.T. Rhoad, E.L. Busch, Advanced Metallization Conference, San Diego, Oct 19-21, 2004 35) “Supercritical Cleans and Repair of Low-k Films for 45nm Technology”, R.F. Reidy, B.P. Gorman, P.K Nerusu, P.P. Kadam, Z. Zhang, R.A. Orozco-Teran, E.C. Chaung, P.D. Matz, J.T. Rhoad, E.L. Busch,. D.W. Mueller, Low-k Symposium: 45nm keffective Challenge, October 21-22, 2004 36) “Mechanical Property Enhancement of Sol-Gel TEFS Low-k Films Via Self-Assembled Microstructural Reinforcement”, B.P Gorman, D.W. Mueller, R.F. Reidy, Low-k Symposium: 45nm keffective Challenge, October 21-22, 2004 37) “Pore Sealing of Ash-Damaged Porous MSQ Using Supercritical Methods”, R.F. Reidy, P.K Nerusu, P.P. Kadam, Z. Zhang, R.A. Orozco-Teran, E.C. Chaung, P.D. Matz, B.P. Gorman, J.T. Rhoad, E.L. Busch,. D.W. Mueller, Low-k Symposium: 45nm keffective Challenge, October 21-22, 2004 2005 38) “Viability of Supercritical Processing: Ash-damage Repair and Pore Sealing of Porous MSQ”, Rick Reidy, P.M Capani, P. Nerusu, R.A. Orozco-Teran, D.W. Mueller, Sematech Program Advisory Group meeting, February 23, 2005 (invited) 39) “Development of Supercritical Processing in BEOL Cleans”, Rick Reidy, American Physical Society, March 25, 2005 (invited) 40) “Supercritical Pore Sealing of Low-k Dielectrics”, Pawan K. Nerusu, R. F. Reidy, D. W. Mueller, P.M. Capani, P. D. Matz, E. L. Busch, and J. T. Rhoad, Materials Research Society, Symposium on Materials, Technology, and Reliability of Advanced Interconnects, March 28-April 1, 2005 41) “Intrusion of Hexamethyldisilazane during Supercritical Carbon Dioxide Functionalization of Triethoxyfluorosilane Low-k Films”, P.M.Capani, P.D. Matz, D.W. Mueller, M.J. Kim, E.R. Walter, J.T. Rhoad, E.L. Busch, R.F. Reidy, Materials Research

19

Society, Symposium on Materials, Technology, and Reliability of Advanced Interconnects, March 28-April 1, 2005 42) “The Development of Supercritical Silylation as a Repair Tool for Porous Low-k Films”, Rick Reidy, P.M Capani, P. Nerusu, R.A. Orozco-Teran, B.P. Gorman, P.M. Matz, D.W. Mueller, 2005 Surface Preparation and Cleaning Conference, April 18-20, 2005 43) “Intrusion of Hexamethyldisilazane during Supercritical Carbon Dioxide Functionalization of Low-k Films”, P.M.Capani, P.D. Matz, D.W. Mueller, B.P. Gorman, E.R. Walter, R.F. Reidy, International Symposium on Supercritical Fluids, Orlando, May 2-5, 2005 44) “Analytical TEM Characterization of Metal Penetration and Supercritical Pore Sealing of Ash-Damaged Porous Low-ks”, B.P. Gorman, D.W. Mueller, O. Chyan, R.F. Reidy, Advanced Metallization Conference, Colorado Springs, CO, September 27-29, 2005 45) “Research Directions of Supercritical Fluids in the Semiconductor Industry”, R.F. Reidy, Intel Community Environmental Working Group, Corrales, NM, October 27, 2005 (Invited) 2006 46) Studies of Low Dielectric Constant Films Using Ambient and Supercritical FTIR Spectroscopy, Rick Reidy, Thermo Symposium on Molecular Spectroscopy, Greenbelt MD, Feb. 23, 2006 (invited) 47) “Tailored Repair of low-k Dielectrics Using Mono- and Di- Functional Silanes Dissolved inSupercritical CO2 ,” Casey Eben Smith, Richard Reidy, Dennis Mueller, and Phil Matz, MRS Symposium on Materials, Technology, and Reliability of Low-k Dielectrics and Copper Interconnects, April 17-21, 2006 48) “Ordered Hydrophobic Mesoporous Fluorinated Silica Thin Films,” Mingming Du, Dennis W Mueller, Phil D Matz, Casey E. Smith, Pawan Nerusu, R.F. Reidy, MRS Symposium on Materials, Technology, and Reliability of Low-k Dielectrics and Copper Interconnects, April 17-21, 2006 (poster) 49) “Effects of Ashing and Silylation of Porous Low-k on Surface Roughness and Metal Barrier Penetration,” R.F. Reidy, C.E Smith, B.G. Gorman, D.W. Mueller, Sematech Cleaning and Surface Preparation Conference, May 5, 2006 Austin TX 50) “Panel Discussion on FEOL and BEOL Cleans”, Sematech Cleaning and Surface Preparation Conference, May 5, 2006 Austin TX (invited) 51) “Materials Science—studying the stuff that makes up our world”, R.F. Reidy, North Texas Academic and Leadership Academy, June 7, 2006 52) “Semiconductor International Webcast on Photoresist Removal,” Trace Hurd, Paul Mertens, Rick Reidy, Mark Thrisk, Brian White, June 20, 2006 (invited) 53) “Effects of Ash and Silylation Processes on Porous MSQ”, R.F. Reidy, Sematech Interconnect Group, June 23, 2006 (invited) 54) “Effect of Low-k Surface Roughness on Subsequent Metal Layers”, C.E. Smith, M. Du, P.D. Matz, D.W. Mueller, R.F. Reidy, Advanced Metallization Conference, San Diego, CA, October 17-19, 2006 (poster) 55) “Characterization of Plasma Damage in Porous Low-K Dielectrics.” R.F. Reidy, D.W. Mueller, M. Kim, B.P Gorman, P.D. Matz, C.E. Smith, E. Vinogradova, R.A. Orozco-Teran, Fourth International Surface Cleaning Workshop, November 7-8, 2006 (invited) 2007 56) “Plasma Damage and Moisture Adsorption in Porous Low-k Dielectrics “, R. Reidy, E. Vinogradova, D. Mueller, P. Matz, Sematech Surface Preparation and Cleaning Conference, April 24-26, 2007

20

57) “Key Challenges in Surface Preparation at 45nm”, J. Barnett, P. Martens, S. Ragavahan, R. Reidy, Semiconductor International Webcast, April 30, 2007, (invited) 58) “Effects of Plasma Damage on Low-k Film Surface Properties and Moisture Adsorption,” R.F. Reidy, E. Vinogradova, C.E. Smith, D.W. Mueller, 5th International Surface Cleans Workshop, Boston, MA, November 12-13, 2007 (invited) 2008 59) “Moisture Adsorption in Plasma-Damaged Porous Low-k Dielectrics”, E. Vinogradova, C.E. Smith, D.W Mueller, R.F. Reidy, Materials Research Society, Materials and Processes for Advanced Interconnects for Microelectronics, San Francisco, March 25-27, 2008 60) “Using FTIR and D2O to monitor moisture absorption in porous films”, Ekaterina Vinogradova, D.W. Mueller, P.D. Matz, Rick Reidy, Thermo Vibrational Spectroscopy Research Symposium, Houston, TX, February 21, 2008 (invited) 61) “Cu/Low-k Cleaning and Pore Sealing”, R.F. Reidy, Sematech Surface Preparation and Cleaning Tutorial, Austin, TX, March 31, 2008 (invited) 62) “Effects of Oxidizing and Reducing Plasmas Damage on Porous Low-k Film Surface Properties”, R.F. Reidy, E. Vinogradova, E. Osei-Yiadom, C.E. Smith, D.W. Mueller, Sematech Surface Preparation and Cleaning Conference, Austin, TX, April 1-2, 2008 63) "Synthesis, Modification, and Characterization of Porous Low-k Silica Films for Semiconductor Applications", Texas and Southwest Thermal Analysis and Rheology Forum Section of the North American Thermal Analysis Society (NATEX), Dallas, TX, May 13, 2008 (invited) 64) “Effects of Dry and Wet Cleans on Porous CVD Low-k Films”, 6th International Surface Cleaning Workshop, Eric Osei, Yiadom, D.W. Mueller, Rick Reidy, Boston, MA, November 3-4, 2008 (invited) 65) “Texas Governor’s School at the University of North Texas” 2008 Texas Association for the Gifted and Talented Annual Professional Development Conference, Rick Reidy and Christina Dearman, Dallas, TX, November 12-14, 2008. 2009 66) “The Interaction of Roughness and Chemical Functionalization of Thermal Oxide and TEOS layers on the Wetting of Aqueous Cleans”, R.F. Reidy, N. Martinez, E. Osei-Yiadom, M. Romanes, D.W. Mueller, Casey Smith, Sematech Surface Preparation and Cleaning Conference, Austin, TX, March 22-24, 2009 67) “Functionalization of Porous Films using Supercritical Fluids”, Richard F. Reidy, Casey E. Smith, Peter Capani, R.A. Orozco-Teran, BP Gorman, D.W. Mueller, PolyChar 17 World Forum on Advanced Materials, Rouen, France April 21-24, 2009 2010 68) “The Effects of Surface Roughness and Chemistry on SiO2 and low-k Film Wetting”, R.F. Reidy, N. Martinez, E. Osei-Yiadom, M. Romanes, D.W. Mueller, Sematech Surface Preparation and Cleaning Conference, Austin, TX, March 22-24, 2010 69) “Mediation of Electrostatic Discharge Induced Morphological Damage in Atomically Precise Tips”, B. P. Gorman, J. Ballard, M. Romanes, D. Jaeger, R. F. Reidy, J. N. Randall, Microscopy and Microanalysis 2010, Portland August 1-5, 2010. 70) “The Effects of Plasma and Chemical Modification on Wetting of Low-k Films”, Eric Osei-Yiadom, Nelson Martinez, Maia Bischof, R. F. Reidy, 7th International Surface Cleaning Workshop, Boston, Massachusetts, October 27-29, 2010 (invited)

21

71) “Temperature Effects on Repaired Plasma-damaged Low Dielectric SiOCH Films”, Eric Osei-Yiadom, R. F. Reidy, ASME International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, November 12-18, 2010 (poster) 2011 72) Copper/Low-k Cleaning and Drying, Surface Preparation and Cleaning Conference Tutorial, Austin Texas, March 21-23, 2011 73) Surface Modification of Low-k Porous Films by Silylation and UV-Curing, Eric Osei-Yiadom, Maia Bischof, Neil McHenry, D.W. Mueller, R.F. Reidy, Surface Preparation and Cleaning Conference, Austin, Texas, March 21-23, 2011 (Poster) 74) “Deterministic Single Atom STM Tip Technology for Atomically Precise Manufacturing”, Joshua Ballard, Justin Alexander,Adrian Radocea, Maia Bischof, David Jaeger, John Randall, Brian Gorman, Jim Von Ehr, Rick Reidy, American Physical Society Meeting, Dallas, TX March 21, 2011 75) “Atmospheric Stability of Tungsten STM Tips for Atomically Precise Manufacturing (APM)”, Maia Bischof, David Jaeger, Joshua Ballard, Justin Alexander, John Randall, Richard Reidy, Brian Gorman, Jim Von Her, American Physical Society Meeting, Dallas, TX March 21, 2011 76) “Nanoscale Processing and Characterization of Surfaces”, R.F. Reidy, CINVESTAV, Queretaro, Mexico, November 4, 2011.(invited) 2012 77) “Investigations on the Mechanism of Zirconium Carbide Formation via Carbothermal Reduction of Yttria-Stabilized Zirconia”, Anchal Sondhi, Carl Morandi, Richard F. Reidy, Thomas W. Scharf, 36th International Conference and exposition on Advanced Ceramics and Composites, Orlando, FL, January 22-27, 2012 78) “Chemical Methods to Mitigate Roughness Caused During Wet Cleans of Low-k Films”, R.F. Reidy*, O. Okobiah, N. Martinez, E. Osei-Yiadom, L. Cao**, M. Bischof, Surface Preparation and Cleaning Conference, Austin, Texas, March 19-21, 2012 79) “Development of Magnetic Bio-Active Coatings”, Oseoghaghare Okobiah, Maia Bischof, Ian Mackinnon, Rick Reidy, 4th Workshop on Current Trends in Molecular and Nanoscale Magnetism, Ouranoupolis, Greece, 10-14 June 2012 80) “Mechanistic investigations in Carbothermal reduction of Zirconia”, Anchal Sondhi, Carl Morandi, Richard F. Reidy, Thomas W. Scharf, Materials Science & Technology Conference and Exhibition, Pittsburgh, PA, October 7-11, 2012 2013 81) “The Effect of Cleaning Chemistries on the Wetting of Graphene”, T.S. Smith, C.M. Cooper, K.M. Lynch, O. Okobiah, N.D. Shepherd, A. Kouloumpis, M. Baikousi, K. Dimos, S. Hwang, W. Choi, R.F. Reidy, Surface Preparation and Cleaning Conference, Austin, Texas, April 2-4, 2013 82) “Wetting Behavior of Low-k Substrates in Cleans Solutions” T.S. Smith, K.M. Lynch, C.M. Cooper, O. Okobiah, E. Osei-Yiadom, M. Bischof, A. Kouloumpis, M. Baikousi, K. Dimos, R.F. Reidy, Surface Preparation and Cleaning Conference, Austin, Texas, April 2-4, 2013 84) “Synthesis and Characterization of Novel Carbon-based Nanostructures for Hydrogen Storage”, K Dimos, MA Antoniou, Ch Tampaxis, FL Kuo, RF Reidy, G. Charalambopoulou, Th A Steriotis, D. Gournis, 6th Panhellenic Symposium on Porous Materials, Sept 9-10, 2013, Kavala, Greece 85) “Atomically-Precise Three-Dimensional Top Down Fabrication”, J.B. Ballard, J.H.G. Owen, E. Fuchs, S. McDonnell, D. Dick, G. Mordi, A. Azcatl, O. Seitz, P. Campbell,J.F. Veyan, Y. Chabal, R.M. Wallace, M. Bischof, D. Jaeger, R. Reidy, N. Sarkar, J.N. Randall, 17th Annual Conference on Solid State Sensor, Actuators, and Micro-systems, Barcelona, Spain June 16-20, 2013, IEEE

22

2014 86) The Effects of Surface Preparation of Graphene on Nanometer-scale Copper Layers, Kelsey Lynch, Saeddeh Ravandi, Nadia Todorova, Oseoghaghare Okobiah, Jesse Smith, Tyler Smith, Rick Reidy, Surface Preparation and Cleaning Conference, Austin, Texas, April 22-24, 2014, presenter 87) Wet Processing and Wafer Cleaning, Solid State Technology Webcast, August 14, 2014, presenter 88) BEOL, Passivation, Particle Removal, Wet Cleaning Workshop, Austin, TX April 21, 2014, instructor 89) Surface Preparation and Wet Cleaning, AVS Symposium, Albuquerque, NM, June 2-3, 2014, instructor 2015 90) High Temperature Water Etching of Silicon Nitride, Oseoghaghare Okobiah, Kevin Williams, Rick Reidy, Surface Preparation and Cleaning Conference, Saratoga Springs, NY April 13-14, 2015, presenter 2016 91) High Temperature Water as a Clean and Etch of SiO2 Films, Joshua Barclay, Oseoghaghare Okobiah, Tina Sengphanlaya, Rick Reidy, Surface Preparation and Cleaning Conference, San Jose, CA April 18-20, 2016, presenter 2017 92) High Temperature Water Clean and Etch Reactions with Low-k and SiO2Films: Experiments and Simulations, Joshua Barclay, Lu Deng, Oseoghaghare Okobiah, Tina Sengphanlaya, Jincheng Du, Rick Reidy, Surface Preparation and Cleaning Conference, Austin TX , March 28-29, 2017, presenter 2018 93) Etching of Silicon Nitride with High Temperature Water and Deuterium Oxide, Joshua Barclay, Jesse Smith, Rick Reidy, Surface Preparation and Cleaning Conference, Boston MA , April 10-11, 2018 Honors and Awards University Distinguished Teaching Professor (2016) UNT Leadership Fellow (2011-2012) Tech Titans Finalist—University Education (2011) Johns Hopkins University-Applied Physics Laboratory, Physical Science Invention of the Year Flexible Body Armor, (2004) Semiconductor Research Corporation Summer Faculty Fellow (2001) University of North Texas Summer Research Fellow (1998, 1999, 2000) Council for Advancement and Support of Education Award of Excellence (1998) Office of Naval Technology Postdoctoral Fellow (1992-1994) Mining and Mineral Resources Research Institute Fellow (1990-1992)

23

SERVICE ACTIVITIES (leadership positions in bold) University Advocates and Allies Program Coordinator (2015-present) Institutional Effectiveness Committee (2012-present) Beyond Tenure Promotion Panel (2012-present) Grievance Writing Committee (ad hoc), Chair (2014-2015) Nanofabrication Cleanroom Advisory Group Meeting (2013-2015) Retention Management Committee (2013-2015) TracDat Committee (2012-present) Academic Plan Committee (2012-2013) Beyond Tenure Panel (2011, 2012, 2013, 2014) Workgroup for UNT slogan (2011) REAC Cluster Search Committee member (2011-2012) Chairs Council (2010) Academic Integrity Consultant (2010-present) Cluster Search Committee co-chair (2008-2009) Ad Hoc Committee –Tenure Review for Provost, Chair (2008) University Library Committee (member 2002-2008, Chair, two years) Faculty Senate Ad Hoc Committee on promotion and tenure procedures (2006) Vice President for Finance and Business Affairs Search Committee (2007-8) Faculty Senator- Group III (2003-2008) IP/Patent Committee (2007-2008) Physics Faculty Search Committee –photonics (2007-8) Physics Faculty Search Committee –thin film growth (2007-8) Academic Planning Council (2005-2007) Committee on Scholarly Misconduct (2005-2007) Ad Hoc Committee for Scholarly Misconduct (9-07 through 12-07), Chair Faculty Senate Ad Hoc Committee on Tenure (2006) Visiting Scholars Lecture Series Committee (2002-2004) Ad Hoc Committee on Research (1999)

College Library Liaison for College of Engineering (2004-present) Academic Integrity Officer for the college of Engineering (2010-present) Chair, CENG Ad Hoc Committee to amend rules of CENG PAC (2017-2018) Chair, Search Committee for Biomedical Engineering (2015-17) Engineering Technology Ad Hoc Committee for Promotion (2016) College of Engineering Ad Hoc Committee for Promotion (2015) Ad Hoc Committee for Promotion for Dept. of Engineering Technology (2015) Search Committee for Associate Dean for Accreditation and Assessment (2013- 2014) Mentor for MEE (Xu Nie, 2012-2015) Ad Hoc Committee member for Promotion (2013) Ad Hoc Committee for Promotion and Tenure Guidelines (2012-2014) Library Liaison (2012-present)

24

Chair Evaluation Committee (2011-2012) Ad Hoc Grievance Committee (2009-2010) Mechanical and Energy Engineering Chair Search Committee (2008-9) College of Engineering Personnel Affairs Committee (2007-2008) College of Engineering Constitution and Bylaws Creation Committee (2007-8) Mechanical and Energy Engineering Department Personnel Affairs Committee (2006,

2008 chair) Advocate for Engineering promotion candidate (2007) College of Engineering Curriculum Committee (2004-2006) College of Arts and Sciences Expo Committee (renamed: Solutions 99) (1997- 99) Department MTSE Newsletter (2016-present) Class of 2019 cohort advisor (2015-present) Class of 2018 cohort co-advisor (2014-present) Associate Chair (2012-present) ABET and Undergraduate committee (2012-present) TracDat Coordinator (2012-present) Library Liaison for Department (1997-present) Advocate for Tenure candidates (2016-2017) Chair Search Committee, (2014-2015) Chair Merit Policy Committee (2014) PhD Qualifier Ombudsman (2013,2014) Strategic Plan Committee (2013- 2014) Departmental space committee, chair (2012-2014) Departmental webpage redesign Mentor (2012-2015, Pete Collins) Ad Hoc Committee on Adjunct and Research Faculty (2012) Ad Hoc Committee on Space (2012) MTSE Search Committee member (2011-2012) MTSE Search Committee member (2010-2011) MTSE Search Committee Chair (2009-2010) Member Personnel Affairs Committee (2004-2007, 2010, 2013 (acting chair)) MTSE Search Committee co-Chair (2006-7) MTSE Search Committee, Chair (2005) Department Curriculum Coordinator (1997- 2001) Department WebMaster (1997- 2001, 2003-2005) Department Qualifier Examination Committee ((2000-2003) MTSE Search Committee for Chair (1999) MTSE Search Committee (1999, 2001) Community Outside the University Organizing Committee—Sematech Surface Preparation and Cleaning Conference (2008-

present)

25

Tutoring 8th graders for Texas Assessment of Knowledge and Skills (TAKS)- Science (2010-2011)

o Organized a group of graduate students to tutor 8th graders at Strickland Middle School. These weekly after school session were to help the middle school increase its passing rate in the Science TAKS. All of the approximately 15 kids we tutored over the spring semester passed helping the school increase its passing rate to 80% (up from 68% in the previous year).

Advisor Science Fair projects for Azle HS students (2 projects, total of 5 students)—worked in my laboratory for several weeks (2013-2014).

Session Chair, Sematech Surface Preparation and Cleaning Conference, 2007, 2009, 2010 Session Chair, International Surface Cleaning Workshop, 2005, 2007, 2010 International Technology Roadmap for Semiconductors (ITRS) Front End Processes- Surface

Preparation Technical Working Group (Surface Prep- Sub TWG) (2003-present) The TWG is comprised of representatives from chip manufacturers, supplier companies,

universities and academia, technology labs, and semiconductor technology consortia and is charged to:

o assess the state of technology and identify areas that may provide solutions in front and back end surface preparation.

o describes opportunities for new research and innovation in this field. Co-Chair Interconnect Surface Preparation Focus Team (2005-2010)—developed issues

and solutions for the ITRS Roadmap regarding low-k cleans and etching. Focus Team meetings are separate from the Sub-TWG—meeting monthly. Created Agenda and recruited members for the focus team

Steering Committee member for UNT – Metroplex Research Consortium for Electronic Devices and Materials (2002-2009)

Testified before a US House subcommittee on the role of nanotechnology in the US (2003) Journal Reviews (130 reviews- 2003-2017) : Advanced Materials, Applied Surface Science,

Electrochemical and Solid State Letters, IEEE Transactions on Electronic Devices, IEEE Transactions on Semiconductor Manufacturing, Industrial & Engineering Chemistry Research, International Journal of Applied Ceramic Technology, Journal of the American Ceramics Society, Journal of the American Chemical Society, Journal of Applied Physics, Journal of Colloid and Interface Science, Journal of the Electrochemical Society, Journal of Electronic Materials, Journal of Non-Crystalline Solids, Journal of Physical Chemistry, Journal of Physics and Chemistry of Solids, Journal of Sol-Gel Science and Technology, Langmuir, Materials Research Innovations, Metallurgical and Materials Transactions , Microelectronic Engineering, Science, Thin Solid Films

Proposal Reviews (22 reviews 2003-2017): NSF, NASA, Austrian Science Foundation, NIST Outreach: talks to Denton Chamber of Commerce, Kiwanis, local high schools, and Earth

Day Celebrations Science Fair Judge (8 times) Soccer coach— Denton Soccer (9 seasons)