curriculum vitae - educ.utm.my file2 award and honors received 2016 : silver award for “resolving...

1

CURRICULUM VITAE

PERSONAL DETAILS

Name : NOR FADILA BINTI MOHD. AMIN

Gender : FEMALE

Date of Birth : 28 NOVEMBER 1969

Nationality : MALAYSIAN

Marital Status : MARRIED

Permanent

Address

: 19, JALAN SILAT LINCAH 21, BANDAR SELESA JAYA, 81300 JOHOR

BAHRU, JOHOR

Correspondence

Address

: DEPARTMENT OF TECHNICAL AND ENGINEERING EDUCATION,

FACULTY OF EDUCATION

UNIVERSITI TEKNOLOGI MALAYSIA

81310 JOHOR BAHRU, JOHOR, MALAYSIA

Telephone : +607-553 4396

Mobile : +6019-770 1969

Fax : +607- 553 4895/ 557 7351/ 553 4884

Email : [email protected]

Website : http://www.edu.utm.my/fadila

ID Staff : 7076

Expertise : Technical and Vocational Education

Design and Technology

Innovation in Learning and Teaching

ACADEMIC QUALIFICATIONS

2013 : Doctor of Philosopy (Technical and Vocational Education)

Universiti Teknologi Malaysia

2006 : Certificate of Education

University Technology of Sydney

1997 : Master of Education (Technical and Vocational Education)


1992 : Bachelor of Technology with Education (Civil Engineering)


2

AWARD AND HONORS RECEIVED

2016 : SILVER Award for “Resolving the Conundrum of Superior Performers in

Organizations : The Star-Chef Competency Profiling Using the Application of

the Rasch Measurement Model”, in Innovative Practices in Education and

Industry Exhibition (I-PEINX 2016).

2015 : Vice Chancellor Innovation Award 2015 for the innovation of "Sistem

Maklumat Latihan Mengajar", Citra Karisma, 7 June 2015

2014 : SILVER Award for "Sistem Maklumat Latihan Mengajar" in National University

Carnival on e-Learning (NUCEL) 2014

2012 : SILVER Medal (Engineering and Technology Category) for Shuttlecock

Launcher Project in Novel Research and Innovation Competition (NRIC)

2012 : University Excellent Service Award

2002 : University Excellent Service Award

PROFESSIONAL MEMBERSHIP / QUALIFICATIONS / RECOGNITION

1. Member of the Asian Academic Society for Vocational Education and Training (AASVET).

Membership No. : M00006

2. Member of the Malaysia Technical and Vocational Education Association. Membership No. :

V00377

3. Member of the Malaysian Educational Research Association (MERA). Membership No. : O-

0228

ADMINISTRATIVE EXPERIENCE

University Level

2017 : Position/Employer

Nov 2017 to Oct 2020 – Academic Manager (General Courses),

Center for Co-curriculum and Service Learning

Office of Undergraduate Study

UNIVERSITY COMMITTEE

2017 - 2018 : Member of the Innovation and Commercialisation Committe, Faculty of

Education, UTM.

2017 - 2018 : Member of the Technical and Vocational Education and Training Group

Research Colloquium Committee, Faculty of Education, UTM.

2016 – 2018 : Member of the Quality Committee, Faculty of Education, UTM.

3

2016 : Member of the International Service Learning Programme Committee,

Faculty of Education, UTM.

2016 : Member of the Service Learning Comittee, Faculty of Education, UTM.

2016 : Secretary of the Practical Training Committee, Faculty of Education, UTM.

2016 : Member of the Curriculum Review Committee Task Force, Faculty of

Education, UTM.

2016 : Technical and Vocational Education Postgraduate Programme Coordinator,


2015 : Member of the Task Force of the 11th Malaysia Plan Document Preparation

– The construction of building and the provision of equipment for UTM Centre

for Student Innovation

2015 : Member of the Practical Training Committee, Faculty of Education, UTM.

2015 : Member of the First Year Experience Programme Committee, Faculty of

Education, UTM.

2015 : Member of the Undergraduate Compliance Audit Committee, Faculty of

Education, UTM.



2014 : Member of the Occupational Health and Safety Committee, Faculty of

Education, UTM.

2014 : Member of the Practical Training Committee, Faculty of Education, UTM.

2014 : Member of the Students’ Character Development and Activity Committee,


2014 : Member of the Undergraduate Project Committee, Faculty of Education,

UTM.

2014 : Member of the School in Hospital Programme Committee, Faculty of

Education, UTM.



2013 – 2014 : Member of the Faculty of Education Website Project Committee, Faculty of

Education, UTM.

4

2013 : Member of the Enhancing Graduate Attribute Project, Faculty of Education,

UTM.

2013 : Member of the Faculty of Education UTM Brand Pedagogy, Faculty of

Education, UTM.

2013 – 2015 : Member of the Quality Committee, Faculty of Education, UTM.

2012 - 2015 : Member of the Occupational Environment, Safety and Health Committee,


2012 : Fascilitator for the University General Courses TOT Workshop – Innovation,

Creativity and Entrepreneurship Cluster, UTM.

2012 : Fascilitator for the Teacher Development Program, Faculty of Education,

UTM.

2011 – 2013 : Member of the University Students Innovation Committe, UTM

2011 – 2013 : Member of the Data Management System/Office Automation Programme,


2011 – 2013 : Member of the Basic Training Courses for Trainers Programme, Faculty of

Education, UTM.

2010 : Interview Panel for the Bachelor’s Degree Programme in Education and

Diploma in Education Admissions, Faculty of Education

2009 : Member of the Facility Management Committee, Faculty of Education

2009 : Member of the English Proficiency Enhancement Committee, Faculty of

Education

2009 : Coordinator for the purpose of preparing an audit of institution visits

(Academic Performance Audit)

2009 : Facilitator for the Programme of How to Get Yourself Employed and Teacher

Development, Faculty of Education

2009 : Member of the Occupational Safety and Health Committee, Faculty of

Education

2008 : Member of the Vice Chancellor Quality Award Committee, Faculty of

Education

2007 : Member of the Undergraduate Programme Curriculum Review Working

Committee, Faculty of Education

5

2002 : Member of ISO 2000 Committee Task Force, Faculty of Education

2002 : Member of Quality Monitoring Committee, Faculty of Education

2002 : Coordinator for the Special Graduating Programme for Teachers (PKPG) for

Technical Teacher College, Kuala Lumpur

2001 : Member of Islamic Development Bank Tender Evaluation Committee, Faculty

of Education

2001 : Internal Auditor, Faculty of Education

2000 : Coordinator for the Special Graduating Programme for Teachers (PKPG) for

Batu Pahat Teacher College

2000 : Coordinator for Faculty Teaching, Faculty of Education

2000 : Member of Technical and Vocational Education Curriculum Review

Committee, Faculty of Education

1999 : Member of Smart Faculty Committee, Faculty of Education

1999 : Member of ISO 9000 – Teaching Task Force Group Committee, Faculty of

Education

1999 : Member of Task Force for the Preparation of the Vice Chancellor's Quality

Award

NATIONAL APPOINTMENT/COMMITTEE

2016 : Associate Editor

Bulletin of Educational Research, Innovation and Thought (BRIGHT),

Universiti Sains Malaysia.

2016 : Pemikir

Leadership Training Module for Johor State UMNO

The Johor State Umno Liaison Body, 15 Feb 2016.

2016 : Item Development Panels

Competency Assessment of Teachers’ Pedagogical Skills in the Field of

STEM Ministry of Education (MoE), Teacher Education Division, Ministry of

Education, 4 October 2016.

2016 : Item Assessment Panels

Competency Assessment of Teachers’ Pedagogical Skills in the Field of

STEM Ministry of Education (MoE), Teacher Education Division, Ministry of

Education, 4 October 2016.

2015 : Speaker, The Sharing Session on the Development of Service Learning

Guidelines, 23 June 2015, Universiti Pendidikan Sultan Idris (UPSI).

6

2015 : Project Advisor,

School in Hospital Volunteer Program Phase 2/ Serie 2, June 2015.

2015 : Panel for The National Professor Council Roundtable Discussion on

Innovation in Teaching and Learning, 23 November 2015, UTM International

Kuala Lumpur.

2014 : Speaker

Innovation Week Programme 2014, Kota Tinggi Vocational College, Johor.

17 April 2014.

2001 : Chairman of the Quality Control Committee of the KBSM Textbook for

Engineering Drawing Form 4 subject

2000 : Panel for Syllabus Development for the Postgraduate Teacher Education

Course

2000 : Judge for the Science and Innovation Competition in conjuction with Pahang

State Science and Technology Education Carnival 2000

INTERNATIONAL APPOINTMENT/COMMITTEE

2017 : Plenary Speaker

The 3rd International Seminar on Education Technology (ISET 2017), 24

May 2017, Universitas Negeri Semarang, Indonesia

2017 : Workshop Speaker

Universitas PGRI Semarang Postgraduate Programme in Conjunction with

The 3rd International Seminar on Education Technology (ISET 2017), 24

May 2017, Universitas PGRI Semarang, Indonesia

2017 : Committee Member

International Conference Applied Counseling and Psychology (ICACP 2017),

7 – 8 Feb 2017, Le Grandeur Palm Resort, Johor, Malaysia

2017 : Supervisor

International Teaching Practices Programme in collaboration between

Universitas PGRI Semarang and UTM at Sek. Men. Kejuruan Negeri 4 and

Sek. Menengah Kejuruan Negeri 7, Semarang, Indonesia. 12 Feb – 11

March 2017.

2017 : Coordinator

International Teaching Practices Programme in collabaoration between UTM

and Universitas Muhammadiyah Purwokerto, Indonesia, 14 Feb – 14 March

2017.

2016 : Deputy Chair,

Technical and Vocational EducationTraining International Conference

(TVETIC2016), 17 – 20 Nov 2016, KSL Johor Bahru, Malaysia

7

2016 : Workshop Speaker

“Innovation Ecosystem in TVET”

Technical and Vocational EducationTraining International Conference

(TVETIC2016), 17 – 20 Nov 2016, KSL Johor Bahru, Malaysia

2016 : Committe Member

International Conference on Education and Higher Order Thinking Skills

(ICES 2016), 11 – 13 April 2016, Dewan Sultan Iskandar, Universiti Teknologi

Malaysia.

2016 : Coordinator,

International Teaching Practice Programme

Universitas PGRI Semarang, Indonesia, 25 Apr – 20 May 2016.

2016 : Supervisor

International Teaching Practices Sit-In Programme Faculty of Education.,

UTM and Universitas Muhammadiyah Jakarta, Indonesia, 19 Sept – 10 Oct

2016.

2015 : Guest Judge

The Final Round of the South East Asian Global Innovation Challenges

Competition (SEAGIC 2015) organized by the American Chemical Society,

Malaysia International Chemical Science Chapter, 4 Nov 2015, Centre for

Student Innovation, UTM.

2015 : Speaker

Postgraduate Seminar on Sustainability in Higher Educationn, 10 November

2015, Universitas PGRI Semarang, Indonesia.

2015 : Supervisor

International Community Services and Field Teaching Practices for Students

of Faculty of Mathematics and Science, State University of Makassar, 26 July

– 20 August 2015.

2015 : Secretary I

The 2nd International Education Postgraduate Seminar (2ndIEPS 2015), 20 –

21 December 2015, Pulai Spring Resort, Johor Bahru, Johor.

2014 : Mentor Lecturer,

International Teaching Practice Programme for Students of Yogyakarta State

University, 28 June – 20 July 2014.

2014 : Advisor

International Community Services and Teaching Practices for Students of

Faculty of Mathematics and Science, State University of Makassar, 23 August

– 18 September 2014.

8

2014 : Member of The Development of International Sustainable Cultural Village in

Khleang Sbek, Cambodia Council. Nov 2014 – Nov 2016.

2014 : Committee Member

International Seminar on Technical and Vocational Education (TVEIS 2014),

25 – 26 Aug 2014, Universiti Teknologi Malaysia.

2013 : Editor for the 2nd International Seminar on Quality and Affordable Education

(ISQAE 2013), 7 – 10 October 2013, KSL Hotel & Resort Johor Bahru, Johor,

Malaysia.

1999 : Officer for the International Solar Cycle Team, Faculty of Education

RESEARCH ACTIVITIES

Project Leader

1. Pembangunan Modul Latihan Kemahiran Vokasional bagi Peningkatan Kebolehpasaran

Pekerjaan dalam Kalangan Belia di Negeri Johor. Funded by : Universiti Teknologi Malaysia.

Feb 2018 – Jan 2020. (Vot. PY/2017/02040), Allocation RM30,000)

2. The 21st Century and Green Job Competency Framework for Elderly Caregivers in Malaysia.

Funded by : Ministry of Higher Education. Aug 2017 – Aug 2019 (Vot. PY/2017/01180,

Allocation RM44,096)

3. Pelaksanaan Internship dalam Kerja Kursus bagi Program Sarjana Muda. Funded by :

Universiti Teknologi Malaysia July 2016 - July 2018. (Vot. 4J245, Allocation RM10,000)

4. Kualiti Pengurusan Penyiasatan Jenayah PDRM. Funded by : Ministry of Home Affairs

February 2016 - November 2016. (Vot. 4B251, Allocation RM131,105.04)

5. Petunjuk Kesediaan Pembelajaran Arah Diri dalam kalangan Pelajar Pendidikan Teknik dan

Vokasional di Malaysia. Funded by : Universiti Teknologi Malaysia. April 2011 - Sept 2012.

(Vot. 04J86, Allocation RM40,000)

9

Co-Researcher

1. Pembangunan Kurikulum Prasekolah Berteraskan Penggunaan Media Digital dan

Pendekatan Design Thinking. Funded by Industry Kumpulan Niaga Al-Fateh Sdn. Bhd.

March 2017 – February 2020. (Vot. 4C135, Allocation RM30,000)

2. International Service Learning 'Menuju Sejuta Impian Bersama'. Funded by Universitas

Sriwijaya, Palembang, Indonesia 8 - 15 March 2016. (Vot. 4X212, Allocation RM5,000)

3. Development of Rasch-Calibrated Item Pools in Computer Adaptive Testing (CAT) for

Enhancing Reasoning Skills in High School Science and Mathematics. Funded by : Ministry

of Higher Education. November 2015 – October 2017. (Vot. 4X218, Allocation RM99,000) 1

4. Program Pendidikan Kesihatan Menangani Stress dalam kalangan Care-Giver. Funded by :

Universiti Teknologi Malaysia May 2015 - Oct 2016. (Vot.09H60, Allocation RM30,000)

5. Permasalahan Pengajaran dan Pembelajaran Sekolah Memandu di Malaysia dalam Proses

Penguasaan Kemahiran Memandu. Funded by Fundamental Research Grant Scheme

(FRGS) July 2014 - June 2016. (Vot. 4F567, Allocation RM68,200) 2

6. Procrastination Among University Teknologi Malaysia Undergraduate Students and Its

Affects to the Academic Performance. Funded by Universiti Teknologi Malaysia April 2014 -

March 2015. (Vot.09J56, Allocation RM20,000)

7. Kepimpinan Glokal Penghulu Model 3KI Johor Darul Ta'zim. Funded by Universiti Teknologi

Malaysia April 2014 - March 2015. (Vot. 0825, Allocation RM23,000)

8. Penghayatan Jemaah Terhadap Khutbah Jumaat Negeri Johor Darul Ta'zim. Funded by

Johor State Religious Department Dec 2014 - March 2015. (Vot.4B175, Allocation

RM66,478)

9. Formulasi Interpretasi Skor Ujian Menggunakan Perbandingan Pendekatan Teori Ujian

Klasik dan Teori Respon Item. Funded by Fundamental Research Grant Scheme (FRGS)

Dec 2013 - Dec 2015. (Vot.4F381 , Allocation RM81,500)

10. Capacity Building Towards Innovative Ecopshere in Higher Education Institutions in

Malaysia. Funded by National Higher Education Research Institute Aug 2013 - July 2014.

(Allocation RM220,000)

11. Penerokaan Adaptasi Pentaksiran Akhlak dalam Sistem Penggredan Pencapaian Pelajar di

Institusi Pengajian Tinggi Awam. Funded by Exploratory Reseach Grant Scheme (ERGS)

June 2012 - Dec 2014. (Vot.4L057, Allocation RM75,000)

12. Pembinaan dan Pengesahan Instrumen Pengujian Pemahaman Konsep Inovasi. Funded by

Universiti Teknologi Malaysia May 2012 - April 2013. (Vot.05J24, Allocation RM12,099)

13. Exploratory Study in Developing a Framework to Observe, Identify and Capturing Behaviour

Whilst Designer engaged in Sketching Toward Creative and Innovative Designing. Funded

by Exploratory Research Grant Scheme 2014 – 2015. (Vot.4L018, Allocation RM75,000)

14. Pola Kemahiran Visualisasi dan Gaya Belajar dalam kalangan Pelajar Kejuruteraan di UTM.

10

Funded by Universiti Teknologi Malaysia Sept 2009 - Aug 2010. (Vot. 77942, Allocation

RM10,000)

15. The Strategic Management in technical and Vocational Education Program of Malaysia

Higher Institution. Funded by SEAMEO VOCTECH/Netherland Government July 2008 - June

2009. (Allocation USD2,000)

16. Kerangka Pegangan dan Amalan Penyeliaan Pengajaran Pensyarah Pembimbing

Pendidikan Teknikal dan Vokasional/Kejuruteraan dalam Praktikum Latihan Mengajar.

Funded by Fundamental Research Grant Scheme (FRGS) Dec 2007 - Aug 2008.

(Vot.78261, Allocation RM59,918)

17. Characterizing Design for Web-Based Adult Learning System. Funded by Fundamental

Research Grant Scheme (FRGS) Mac 2007 - Mac 2009. (Vot.78113, Allocation RM25,000)

18. Design and Develop Special Equipments for Cerebral Palsy. (Vot. 71030)

CONSULTANCY PROJECTS

Member :

1. Program Pemerkasaan Asnaf bagi Tahun 2016. Unit Pembangunan Asnaf, Majlis Agama

Islam Negeri Johor, Amount : RM134,000 from Majlis Agama Islam Negeri Johor

(Ref.UT.KORP/1.11 Jld. 13 (90), 2016)

2. Electronic Product Development Course (Malaysian Skills Certification Level 4) Module B05-

04001 (Microcntroller Configuration) K2, Amount : RM35,000 from Ministry of Education,

Malaysia (Ref.UT.KORP/1.11 Jld. 8 (13)

3. Research Methodology and Instrument Construction Training for IKBN Graduate

Employability. Amount : RM35,000 from Ministry of Youth and Sports. (29 Sept – 1 Oct

2013)

4. The Concept of Nine Technical and Thrity One Vocational Textbook. Amount : RM19,000

from Ministry of Education (Vot. 63353, June 2002 – October 2003)

ITELECTUAL PROPERTIES

11

Copyright 1. Projek “Kit Merangka Karangan” (December 2015)

2. Projek Inovasi Model Pencernaan Makanan (December 2015)

3. Projek Inovasi Model Bulatan Penyelesaian Masalah Matematik Berayat (December 2015)

4. Projek Inovasi Model Bentuk dan Ruang (December 2015)

5. Block Puzzle (December 2015)

6. Projek Inovasi Pengajaran dan Pembelajaran Ekonomi Asas (Skim Perbankan Islam) –

Wheel of Islamic Banking Kit (December 2015)

7. Projek Inovasi Pengajaran dan Pembelajaran Matematik Berkonsepkan Koordinat Bricknet

(December 2015)

8. Projek Inovasi Permainan Eksplorasi Pendidikan Moral Tahun 3 KSSR (December 2015)

9. Projek Inovasi Pengajaran dan Pembelajaran Perbendaharaan Kata dalam Bahasa Inggeris

“Words Tower” (December 2015)

10. The Understanding Towards the Concepts of Innovation (UKI) Among Students (April 2013)

11. Pemahaman Konsep Inovasi (UKI) di kalangan Pelajar (April 2013)

TEACHING ACTIVITIES

Postgraduate

No. Course Code Course Semester

1. MPPU1003 Innovation in Learning anf Teaching 20172018/2






12



9. MPPV1313 Models of Teaching in Technical and

Vocational Education

20142015/1

10. MPK2053 Current Issues in Technical and Vocational

Education

20132014/2

11. MPK1033 Supervision in Technical and Vocational

Education

20032004/1

12. MPK1043 Foundations of Technical and Vocational

Education

20012002/1

Undergraduate

No. Course Code Course Semester

1. SPPL4412 Invention 20172018/2

2. SPPL1002 Wood Technology 20172018/2

3. SPPE1102 Woodworking Practices 20172018/2

4. UKQA2082 Woodcrafts 20172018/2

5. SPPA2001 Microteaching 20172018/1

6. UKQA2082 Woodcrafts 20172018/1

7. SPPE3102 Domestic Plumbing Works 20172018/1

8. SPPE3392 Plastering and Finishing Works 20172018/1

9. SPPE2272 Foundation and Concrete Works 20162017/2

10. SPPE2272 Foundation and Concrete Works 20162017/1

11. SPPA2001 Micro Teaching 20162017/1

12. SPPE 2052 Basic Furniture Making 20152016/2

13. SPPL4403 Innovation 20152016/1

14. SPPE1322 Construction Materials 20142015/2



17. SPPE3032 Building Drawing 20142015/1


19. SPPE2032 Basic Innovation 20132014/1

13


21. SPPE2052 Basic Furniture Making 20132014/1

22. UKQU2202 Innovation and Creativity 20132014/1

23. UKQU2202 Innovation and Creativity 20132014/2


25. SPPE1622 Construction Technology 20122013/2

26. SPPE1022 Engineering Drawing 1 20122013/2





31. SPPE1102 Wood Practices 20112012/2

32. SPPE1622 Construction Technology 20112012/2



35. SPPE1322 Construction Materials 20112012/1


37. SPE2402 Computer Aided Design 20102011/1

38. SPE2032 Basic Innovation 20092010/2

39. SPE2622 Industrial Design 20092010/2

40. SPL1002 Wood Technology 20092010/1



43. SPE2402 Computer Aided Design 20082009/2

44. LPT1003 Engineering Drawing 20082009/2

45. SPL1002 Wood Technology 20082009/1



14

48. LPA1002 Basic Engineering Drawing 20072008/2

49. SPL2402 Computer Aided Design 20072008/2

50. LPT1003 Engineering Drawing 20072008/2


52. SPK3402 Architectural Drawing 20032004/1

53. SPK3033 Workshop Safety 20022003/2

54. SPK4012 Innovation II 20022003/2

55. SPK4002 Innovation 20022003/2


57. SPH4002 Innovation 20022003/1

58. SPK3032 Basic Innovation 20022003/1


60. SPK2013 Evaluation and Assessment in TVE 20012002/2

61. SPK1042 Construction Technology 20012002/2

62. SPA2000 Micro Teaching 20012002/2


64. SPK3002 Advanced Engineering Drawing 20012002/1

65. SPK2013 Evaluation and Assessment in TVE 20002001/2

66. SPK4002 Innovation 20002001/2

67. SPK1002 Basic Engineering Drawing 20002001/2

68. SPK3042 Trade Practices II 20002001/1

69. SPK2001 Engineering Drawing I 20002001/1


71. SPK1002 Basic Engineering Drawing 19992000/2

72. SPK4012 Innovation II 19992000/2




15

76. SPK3033 Workshop Safety 19961997/2


78. SPK4002 Innovation 19961997/1

79. SPK1013 Basic Trades 19961997/1


SUPERVISION

PhD Student

No. Name Research Title Year/Status Role of

Supervision

1. Muhamad Shafeq bin Abdul

Rashid

Technical and Vocational

Education and Training

2017/Active Main Supervisor

2. Olojuolawe Sunday Rufus Deepening Employability

Skills Among Technical

and Vocational Education

Students in College of

Education in South West

Nigeria


3. Nor Hasmida binti Mohd.

Nor

PPP153043

Competencies

Framework of

Gerontology and Geriatric

Caregivers in Malaysia


4. Crystal Joan Peter

PP123063

Sustainability Leadership

Framework for Malaysian

Polytechnics


5. Nornazira binti Suhairom

PP123023

Chef's Competency

Model for Superior Work

Performance in Culinary

Profession

2013 –

2016/Completed

Co-Supervisor

6. Rohaiza binti Zakaria

PP113206

Sketching to Encourage

Creativity in Designing

2012/ Active Co-Supervisor

Master of Education (by Research)


16

Supervision

1. Noraisyah binti Che

Derashid

MPP143001

Instrument to Measure

the Level of Innovation

Among UTM

Undergraduate Students

2014 - 2017/

Completed

Co-Supervisor

Master of Education (Mixed Mode)


Supervision

1. Zahrina binti Ahmad

MPP162025


2. Fauzi bin Toed

MPP142026

Penerapan Kemahiran

Insaniah dalam Kalangan

Pelajar Program Binaan

Bangunan di Kolej

Vokasional Negeri Johor

2014/ Active Main Supervisor

3. Haslina binti Sulfani

MP121136

Implikasi Transformasi

Pendidikan Vokasional

Terhadap Kursus

Perkhidmatan Asuhan

Kanak-kanak di Kolej

Vokasional

2012 – 2015/

Completed

Main Supervisor

Master of Education (Taught Course)


Supervision

1. Nurfazwin binti Ab Rashid Tahap Kemahiran

Generik Hijau dalam

Kalangan Pelajar

Kejuruteraan Awam

2017/

Completed

Main Supervisor

2. Wan Nurul Nadia binti Wan

Sallehudin

Kaedah Penerapan

Kemahiran Berfikir Aras

Tinggi Dalam Pengajaran

Bagi Guru Reka Bentuk

dan Teknologi di Daerah

Skudai, Johor

2017/Completed Main Supervisor

3. Siti Khadijah binti Rahmad Tahap Kemahiran

Generik Hijau dalam

Kalangan Pelajar

2013 – 2015/

Completed

Main Supervisor

17

Pendidikan Teknik dan

Vokasional di Universiti

Teknologi Malaysia

4. Emeliana binti Elias Ciri-ciri Inovasi Pelajar

Pendidikan Teknik dan

Vokasional

2013/

Completed

Main Supervisor

5. Nasriah binti Sudin Penglibatan Pelajar

dalam Program Formal

Pendidikan dan Latihan

Teknik dan Vokasional di

Institusi Awam di

Malaysia Mengikut

International Standard

Classification of

Education

2010/

Completed

Main Supervisor

6. Syarina binti Ramli Model Kemahiran

Employability bagi Pelajar

Fakulti Pendidikan, UTM

2009/

Completed

Main Supervisor

Undergraduate Student

1. Franklin anak Bala,"Aplikasi M-pembelajaran Berasaskan Sistem Android Bertajuk Unjuran

Ortografik Tahun Dua Kolej Vokasional." 2015 - 2016.

2. Mohammad Khairil Ibraq bin Mohamad Badi, "Modul Pembelajaran Kendiri Vokasional Kerja

Melepa, Bahan Sanitari, Saliran dan Pembentungan bagi Kursus Teknologi Pembinaan."

2014 - 2015.

3. Nor Faralia binti Ngadirin, "Modul Pembelajaran Kendiri Bertajuk Penyediaan Tapak Bina

bagi Pelajar Jurusan Teknologi Pembinaan." 2013 - 2014.

4. Muhammad Faathir bin Basar, " Penggunaan Enapcemar Sungai dalam Pembuatan Bata."

2012 - 2013.

5. Saidatun Nor binti Awang, "Pembangunan Instrumen Kemahiran Berfikir Kreatif dalam

kalangan Pelajar Pendidikan Teknik dan Vokasional." 2011 - 2012.

6. Norsalmi binti Ramli, "Pembangunan Instrumen Penyelesaian Masalah Kreatif Pelajar

Pendidikan Teknik dan Vokasional (CIPSTVE)." 2011 - 2012.

7. Mashitoh binti Mahadi, "Pembangunan Instrumen Gaya Penyelesaian Masalah dalam

kalangan Pelajar Pendidikan Teknik dan Vokasional (PILs)." 2011 - 2012.

8. Nor Nasarah binti Kamal, "Pembangunan Instrumen Kemahiran Employabiliti Pelajar

Pendidikan Teknik dan Vokasional (i-tvees)." 2011 - 2012.

9. Saiful Amri bin Mohd. Ali, "Membangunkan Mesin Shuttlecock Launcher untuk Latihan

Pukulan Smash dalam Permainan Badminton (Sistem Pelancar)." 2011 – 2012.

18

10. Wan Mohd. Elyas bin Wan Deraman, "Membangunkan Mesin Pelancar Bulu Tangkis untuk

Latihan Pukulan Smash dalam Sukan Badminton (Reka Bentuk dan Bahan)." 2011 - 2012.

11. Sazari bin Sapawi, "Membangunkan Mesin Pelancar Bulu Tangkis untuk Latihan Latih Tubi

Pukulan Smash dalam Sukan Badminton (Sistem Feeder)." 2011 – 2012.

12. Azimah binti Mohd. Ajis, "Penguasaan Bahasa Inggeris dalam kalangan Pelajar SPH di UTM

Skudai Johor." 2008 - 2009.

13. Toh Yin Leei, "Pembangunan Perisian E-Kamus Visual Berasaskan Web bagi Topik Struktur

Bangunan dalam Kursus Asas Teknologi Kejuruteraan." 2009 - 2010.

14. Mohd. Samsulnahar bin Mohd. Yusof, "Membina B-ramp untuk Sukan Boccia Kategori BC3."

2009 - 2010.

15. Chia Peggie, "Pembangunan Perisian E-Glossary Berasaskan Web bagi Pembinaan." 2009 -

2010.

16. Mazlisa Banu binti Mohd. Faruk, "Pembinaan Modul Pembelajaran Kendiri Tajuk Peralatan

Tangan dan Tanggam dalam Kerja Kayu bagi Kursus Teknologi Kayu." 2009 - 2010.

17. Zulkifli bin Josti, "Pelaksanaan Mata Pelajaran Kemahiran Hidup di Sekolah Rendah di

Daerah Sabak Bernam." 2008 - 2009.

18. Emy Mastura binti Zulkifli, "Pembangunan Perisian Multimedia Berkonsepkan Teori

Konstruktivisme bagi Lukisan Tangen." 2008 - 2009.

19. Joelymond bin Raymund, "Perlaksanaan Pengajaran Mata Pelajaran Kemahiran Hidup di

Sekolah Menengah Daerah Beaufort, Sabah." 2008 - 2009.

20. Chiew Kai Wan, "Persepsi Guru Terhadap Penggunaan Perisian Multimedia dalam Proses

Pengajaran dan Pembelajaran Mata Pelajaran Kemahiran Hidup Sekolah Jenis Kebangsaan

Cina." 2008 - 2009.

21. Azman bin Ripin, "Kesediaan Kerja dikalangan Pelajar Fakulti Kejuruteraan Elektrik

Universiti Teknologi Malaysia." 2008 - 2009.

22. Adibah binti Abd. Rahim, "Tahap Penguasaan Bahasa Inggeris sebahgai Persediaan untuk

Kerjaya dalam kalangan Pelajar Pendidikan Teknikal dan Kejuruteraan." 2008 - 2009.

23. Lely Khalilah binti Abd. Kamar, "Pembangunan Perisian Multimedia Berkonsepkan Teori

Konstruktivisme bagi Lukisan Persilangan." 2008 - 2009.

24. Ain Aisyarina binti Hamadin, "Kesediaan Pelajar Pendidikan Teknikal dan Kejuruteraan

Universiti Teknologi Malaysia untuk Mengajar Mata Pelajaran Kemahiran Hidup dalam

Bahasa Inggeris." 2008 - 2009

25. Malisa Aini Noor binti A. Malek, "Kesediaan Pelajar Pendidikan Teknikal dan Kejuruteraan

dalam Menceburi Bidang Keusahawanan." 2008 - 2009.

26. Dzufi Iszura binti Ispawi, "Faktor-faktor yang Mempengaruhi Pemilihan Bidang

Keusahawanan sebagai Kerjaya dalam kalangan Pelajar Pendidikan Teknikal dan

Vokasional." 2007 - 2008.

27. Nik Mohd. Amir bin Nik Ab. Aziz, "Faktor yang Mempengaruhi Kreativiti Pelajar Tingkatan 4

dalam Mata Pelajaran Reka Cipta." 2007 - 2008.

28. Mohd. Fairul bin Mohamad Nawai, "Amalan Penyelesaian Masalah Secara Kreatif di dalam

mata Pelajaran Reka Cipta di kalangan Pelajar SPH." 2007 - 2008.

19

29. Subri bin Mohd. Nor, "Tinjauan Terhadap Guru di Sekolah Menengah Teknik Negeri Johor

Terhadap Penerapan Kemahiran Generik dalam Proses Pengajaran dan Pembelajaran Mata

Pelajaran Kejuruteraan." 2007 - 2008.

30. Mazyla binti Mokhtar, "Aplikasi Teknologi Maklumat dan Komunikasi (ICT) dalam

Meningkatkan Pengajaran dan Pembelajaran oleh Guru Teknikal (Awan, Elektrik dan

Jentera) Sekolah Menengah Teknik di Negeri Selangor." 2003 - 2004.

31. Lim Yee Chian, "Faktor-faktor yang mempengaruhi Kepuasan Kerja di kalangan Guru

Teknikal di Sekolah Menengah Teknik : Satu Kajian di Negeri Kedah Darul Aman." 2003 -

2004.

32. Lim Ai Hui, "Keupayaan Mengajar Guru-guru Kemahiran Hidup dalam Bahagian Teras bagi

Sukatan Pelajaran Baru Tingkatan Satu : Satu Tinjauan di Sekolah-sekolah Menengah

Kawasan Skudai." 2003 - 2004.

33. Nur Rabbuaah binti Haji Ismail, "Faktor-faktor yang Mendorong Pertukaran Bidang oleh

Graduan Kejuruteraan ke dalam Bidang Pendidikan ke atas Pelajar-pelajar Sarjana Muda

Teknologi serta Pendidikan di Universiti Teknologi Malaysia." 2003 - 2004.

34. Kua Wee Hong, "Cabaran Pelajar -pelajar Aliran Vokasional di SMT Naik Taraf di Negeri

Johor." 2002 - 2003.

35. Mimi Mohaffyza binti Mohamad, "Faktor-faktor yang Mempengaruhi Suri Rumah Menyertai

Industri Kampung di Mulim Sri Gading, Batu Pahat, Johor." 2002 - 2003.

36. Mohamad Azam bin Hussain, "Peluang Kerjaya Pelajar-pelajar Kursus Kemahiran dan

Teknikal di Kolej Yayasan Pelajaran Johor." 2002 - 2003.

37. Hazlina binti Harun, "Persepsi Pelajar Orang Asli tentang Pendidikan Teknik dan Vokasional

: Satu Tinjauan di Daerah Temerloh, Pahang." 2002 - 2003.

38. Norsuhainy binti Ibrahim, "Tahap Pengetahuan dan Kemahiran Pengajar Pendidikan Teknik

dan Vokasional bagi Orang Kurang Upaya dalam Pelaksanaan Pengajaran dan

Pembelajaran di Kelas-kelas Khas." 2002 - 2003.

39. Nornazalishah binti Ahmad Lias, "Tinjauan terhadap Kemahiran Teknik dan Vokasional di

Institusi Latihan Perindustrian di Negeri Johor bagi Melahirkan Pelatih yang memenuhi

Keperluan Industri." 2002 - 2003.

40. Chin Wee Siong, "Persepsi Pelatih terhadap Latihan Kemahiran di Pusat Latihan Teknologi

Tinggi (ADTEC) di Negeri Johor." 2002 - 2003.

41. Saidi bin Said, "Persepsi Pelajar Perempuan Tingkatan 4 Aliran Vokasional Terhadap latihan

Amali Kerja Bata di Sekolah Menengah Teknik di Negeri Pahang." 2001 - 2002.

42. Zaini bin Che Lah, "Persepsi Guru Pembimbing Terhadap Guru Pelatih Semasa Menjalani

Latihan Mengajar di Sekolah Menengah Teknik di Negeri Pahang." 2001 - 2002.

43. Thayalan a/l Supramani, "Persepsi Guru-guru Pelatih UTM terhadap Peranan Penyelia

Bersekutu di Sekolah Semasa Menjalani Latihan Mengajar." 2001 - 2002.

44. Wan Mohd. Hanif bin Wan Hamzah, "Satu Tinjauan Tentang Pengaruh Faktor Minat, Sikap

dan Persekitaran dalam Pembelajaran Teknologi Automotif di kalangan Pelajar Tingkatan

Empat di Tiga Buah Sekolah Menengah Teknik di Negeri Kelantan." 2001 - 2002.

45. Yasin bin Yusoff, "Tinjauan Terhadap Motivasi, Sahsiah dan Sikap Pelajar Tingkatan Empat

Aliran Vokasional di SMV Naik Taraf kepada SMT di Kelantan." 2001 - 2002.

20

46. Yahya bin Akelah, "Kajian ke atas Pelaksanaan Pendekatan Pembelajaran Masteri dalam

Aliran Vokasional di SMT Negeri Sembilan." 2001 - 2002.

47. Zalina binti Muhammad Zainudin, "Persepsi Tenaga Pengajar Vokasional Terhadap Program

Vokasional di Pusat Serenti di Negeri Johor Darul Takzim." 2001 - 2002.

48. Foong Mang Kit, "Faktor-faktor Yang Mempengaruhi Aliran Teknik dan Vokasional di

kalangan Pelajar Kaum Cina : Satu Tinjauan di Sekolah Akademik di Daerah Skudai." 2000 -

2001.

49. Nurhaslinda binti Hadli, "Kajian Terhadap Kefahaman Konsep bagi Pembinaan Geometri

serta Teknik Pembelajaran yang Diamalkan dalam Lukisan Geometri di kalangan Pelajar

Aliran Vokasional di SMT Daerah Johor Bahru." 2000 - 2001.

50. Fauziah binti Mohd. Noor, "Satu Tinjauan Kesesuaian Mata Pelajaran Pengkhususan

Kejuruteraan Awam Terhdap Pelajar Sarjana Muda Teknologi Serta Pendidikan

(Kejuruteraan Awam) Sebagai Persediaan Mangajar Mata Pelajaran Pengajaian

Kejuruteraan Awam di Sekoalh Menengah Teknik." 2000 - 2001.

51. Karpagam a/p Gurusamy, "Suatu Kajian Terhadap Tahap Celik Komputer di kalangan

Mahasiswa Tahun Satu Fakulti Pendidikan, Unversiti Teknologi Malaysia." 2000 - 2001.

52. Mohd. Khaizalamin bin Kadir, "Tahap Kesediaan Guru Pelatih Lelaki mengajar Mata

Pelajaran Elektif Kemahiran Hidup Ekonomi Rumah Tangga." 2000 - 2001.

53. Azidi binti Sarudin, "Tahap Kesediaan Pelajar Tahun 3STP UTM Terhadap Latihan

Mengajar." 1999 - 2000.

54. Che Rejuna bin Che Lah, "Satu Tinjauan ke atas Amalan Kebersihan di kalangan

Pengusaha Kedai Makan di dalam Kawasan Pentadbiran Majlis Daerah Kota Bharu,

Kelantan." 1999 - 2000.

55. Nor Suhailah binti Jusah, "Pengaruh Kafe Siber Terhadap Pembentukan Sahsiah Remaja

Mas Kini : Satu Tinjauan." 1999 - 2000.

56. Md. Zamsuri bin Harjin, "Rekabentuk Acuan Pasir Berukir." 1999 - 2000.

57. Samsul Bahri bin Abd. Hamid, "Kajian Rekabentuk Alat Penyegar Makanan." 1999 - 2000.

58. Junainah binti Tarif, "Faktor-faktor yang Mempengaruhi Pencapaian Pelajar Melayu dalam

Mata Pelajaran Prinsip Akaun di Daerah Kulai." 1999 - 2000.

59. Ismail bin Tamby Chik, "Penilaian Diri Pelajar Kejuruteraan Awam Universiti Teknologi

Malaysia, Skudai Terhadap Ciri-ciri Seorang Jurutera Awam Menurut Kehendak Institusi

Jurutera Malaysia." 1999 - 2000.

POSTGRADUATE EXAMINATION/VIVA

UTM Students/Viva-Voce

1. Chairman of the Med Viva for Yuzamri Yusoff, 7 March 2017.

2. Co-Chairman of the PhD Viva Panels for Zhang Yong, 4 December 2016.

3. Co-Chairman of the PhD Viva Panels for Sada Adamu Maigari, 25 September 2016.

4. Co-Chairman of the PhD Viva Panels for Siti Dahlia Said, 13 September 2016.

5. Co-Chairman of the PhD Viva Panels for Zulkifli, 24 December 2013.

21

MEd Internal Examiner

1. Nurashikin binti Jubri, “Kesedaran Pemakaian Bra Sukan dan Corak Pergerakan Payu Dara

dalam kalangan Atlet Remaja.” Master of Philosophy, May 2015.

2. Dian Dianti binti Jumaat, “Hubungan Kepercayaan Penyeliaan dengan Gaya Kepimpinan

Guru Penolong Kanan Terhadap Guru Kemahiran Hidup Sekolah Rendah di Pasir Gudang”,

Master of Education, Dec 2013.

3. Jamaliah binti Mohd. Jamal, “Kesediaan Guru Terhadap Pelaksanaan Penataran

Pentaksiran Berasaskan Sekolah Kemahiran Hidup Bersepadu Tingkatan Satu” Master of

Education, Mei 2013.

PUBLICATIONS

JOURNAL

Scopus Journal :

1. Nor Fadila Amin, Adibah Abdul Latif, Mahyuddin Arsat and Nornazira Suhairom (2017).

“Measuring Changing of Problem Solving Ability Using Rasch Measurement Model”. Advanced

Science Letters, 23 (1), 117 – 120.

2. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Latib and Nurul Ida Mohd.

Azmi (2017). “International Teaching Practice in Technical and Vocational Education.”

Advanced Science Letters, 23 (1), 647 – 650.

3. Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nor Fadila Amin (2017). “A

Conceptual Model of Scenario Based Learning for Developing Higher Order Thinking Skills in

Engineering." Advanced Science Letters, 23(1), 194-196.

4. Mahyuddin Arsat, Nor Fadila Amin, Adibah Abdul Latif and Rashidah Arsat (2017).

“Integrating Sustainability in a Student-Centered Learning Environment for Engineering

Education”. Advanced Science Letters, 23 (1), 651 - 655.

5. Yusri Bin Kamin, Azlan Abdul Latib, Nor Fadila Amin, and Muhammad Sukri Saud (2017).

“Technical Skills Competency Level Among Students at Vocational Colleges in Malaysia.”

Advanced Science Letters, 23 (1), 573 - 576.

6. Azlan Abdul Latib, Nor Fadila Amin, Muhammad Sukri Saud, and Yusri Kamin (2017).

“Impact of a Service Learning Program to the University and the Community.” Advanced

Science Letters, 23 (1), 596 - 599.

7. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Amin, Dayana Farzeeha Ali and

Umawathy Techanamurthy (2017). “A Framework of Culinary-Specific Competencies for

Sustainable Professional Development in Gastronomic Tourism.” International Information

Institute (Tokyo). Information 19, no. 10B (2016): 4683.

8. Nor Aisyah Che Derasid, Aede Hatib Musta’amal. Nor Fadila Amin, and Abdul Rashid

Husain. “Content Validity for Innovation Level of UTM Undergarduate Students: A Quantitative

Approach.” Man In India, 96(1-2), 477-488

22

9. Adibah Abdul Latif, Nor Fadila Amin and Wilfredo Herrera Libunao (2016). "Multiple Choice

Item Analysis Using Classical Test Theory and Rasch Measurement Model." Man in India, 19

(1-2), 173 - 181.

10. Nornazira, S., Aede, H. M. A., Fadila, M. A. N., Mahani, M., & Husna, A. W. N. (2015)." A

Needs Assessment for the Development of a Competency Model for Culinary

Professionals." Advanced Science Letters, 21(6), 1662-1665.

11. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Amin and Noor Khairul Anuar

Johari. “A Preliminary Study of the Needs for the Development of Competency Measurement

Instrument for Malaysian Chefs”. Pertanika Journal of Social Sciences & Humanities, 23.

12. Nazira Suhairom, Aede Hatib Musta'amal, Nor Fadila Mohd. Amin and Noor Khairul Anuar

Johari (2014). "The Development of Competency Model and Instrument for Competency

Measurement : The Research Methods." Procedia-Social and Behavioral Sciences, 152, 1300

- 1308. (ISI indexed). http://dx.doi.org/10.1016/j.sbspro.2014.09.367

13. Nor Fadila Amin, Muhamad Sukri Saud, Yahya Buntat and Adibah Abdul latif (2013). "The

Application of Rasch measurement Model in Measuring Change in Students Self-Directed

Learning Readiness." Advanced Science Letters. 19 (22), 3736 - 3738. (SCOPUS indexed).

http://dx.doi.org/10.1166/asl.2013.5242

14. Muhammad Sukri Saud, Mohd. Hizwan Mohd. Hisham, Mohd. Safarin Nordin, Nor Fadila

Amin and Yahya Buntat (2013). "Cooperative Problem Based Learning (CPBL) Model : A

Technical Review." Advanced Science Letters. 19 (22), 3637 - 3638. (SCOPUS indexed).


Non-Refereed Journal

1. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Mohd. Amin, Muhammad Khair

Nordin and Dayana Farzeeha Ali (2016). “Quality indicators in the field of culinary

professions in Malaysia - a method of developing competency profiling through self-

assessment.” The Online Journal for Technical and Vocational Education and Training in

Asia, 7.

2. Asnul Dahar Minghat, Nor Fadila Amin, Ruhizan M. Yasin and Ramlee Mustapha (2014).

"Pembinaan Indikator Kelestarian Pendidikan Teknikal dan Vokasional Sekolah Menengah

Harian Melalui Kajian Delphi." Sains Humanika, 2(4).

3. Saud, M. S., Rajuddin, M. R., Ismail, S., Nordin, M. S., Minghat, S. D., Subari, K., Amin, N.

F. & Arsat, M. (2010). "ICT Application in Vocational and Technical Education and Training

(TVET) Onstitutions in malaysia. " SEAVERN Journals, 2(1).

4. Rajuddin, M. R., Ibrahim, Z., Ismail, S., Udin, A., Abdul Latib, A. and Mohd. Amin, N.F.

(2008). "The Expectation of the Small and Medium Enterprises in Malaysia." SEAVERN

Journal. 1 (1).

5. Nor Fadila Amin & Widad Othman (1999), "Persepsi Guru Terhadap Cabaran Pelaksanaan

Mata Pelajaran Elektif KBSM", Jurnal Penyelidikan Pendidikan, 1(1), 15 - 28.

http://dx.doi.org/10.1016/j.sbspro.2014.09.367



23

Book

1. Mohd. Shuisma Mohd. Amail, Bahrain Abu, Rubita Sudirman, Lim Cheng Song, Fauzan

Khairi Che Harun, Maheza Irma Mohamad Salim, Nor Fadila Mohd. Amin, Nor Bahiah

Ahmad, Zainuddin Abu Bakar and Mahyuddin Arsat (2016). High Impact Educational

Practices (HEIPs). In Rose Alinda Alias and Baharuddin Aris (Eds). A Guide to New

Academia Learning Innovation (1st edition). pp. 63 – 79, ISBN 978-967-0194-71-4.

Book Chapter

1. Widad Othman, Nor Fadila Mohd. Amin, Halijah Ibrahim and Muhammad Sukri Saud

(2008). "Tahap Kesediaan Arah Diri Pelajar Dewasa dan Reka Bentuk Scaffolding dalam

Pembelajaran Reka Cipta Secara Online." In ICT Dalam Pendidikan Teknik dan Vokasional.

pp. 99 - 114. ISBN 978-983-52-0513-2.

Classified/Technical Report

1. Abdul Rashid Hussein, Aede Hatib Musta’amal, Nor Fadila Amin, Mohd. Azhar Abd. Hamid,

Abd. Rahman Tamuri, Norma Alias, Mohd. Bakri Bakar, Hairudin Abdul Majid, Azurah A

Samah and Normal Jusoh (2015). “Innovation Competition : Lighting, Improving Community &

Creative Souvenir : Report 2015”. UTM Centre of Student Innovation, Johor Bahru.

Proceedings/Conference International

1. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib, Haslina Sulfani

Mohd. Hanapiah and Nor Hasmida Mohd. Noor, “The Aftermath of Transformation of Malaysia

Vocational Education System on Early Childhood Studies in Vocational Colleges.” 2017 2nd

Advanced Researchon Business, management and Humanities (ARBUHUM 2017). Oct 10 –

12, Patong Resort Hotel, Phuket, Thailand.

2. Yusri bin Kamin, Azlan Abdul Latib, Nor Fadila Amin, Muhammad Sukri Saud and Adnan

Ahmad, “Work-based Learning: Employer Perspective towards the Automotive Industry.” 2017

2nd Advanced Researchon Business, management and Humanities (ARBUHUM 2017). Oct

10 – 12, Patong Resort Hotel, Phuket, Thailand.

3. Muhammad Muhammad Inti, Azlan Abdul latib, Shola Francis Bakare, Yusri Kamin and Nor

Fadila Amin. “Pedagogical Approaches Required for Fostering Interpersonal Skills among

Mechanical Engineering Technology Students.” 2017 2nd Advanced Researchon Business,

management and Humanities (ARBUHUM 2017). Oct 10 – 12, Patong Resort Hotel, Phuket,

Thailand.

4. Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nor Fadila Amin, “Setup,

Maintenance and Troubleshooting of Computer System Skills for Technical and Vocational

Education Teachers.” 2017 2nd Advanced Researchon Business, management and

Humanities (ARBUHUM 2017). Oct 10 – 12, Patong Resort Hotel, Phuket, Thailand.

5. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib, Adibah Abdul Latif

and Haslina Sulfani Mohd. Hanapiah, “Implications of Malaysian Technical and Vocational

24

Education Transformation on the Implementations of Early Childhood Studies in Vocational

Colleges.” Asia International Multidisciplinary Conference (AIMC 2017). May 1 - 2, Universiti

Teknologi Malaysia.

6. Yusri Bin Kamin, Azlan Abdul Latib, Nor Fadila Amin and Muhammad Sukri Saud, “What

Employers says about Work-Based Learning.” Asia International Multidisciplinary Conference

(AIMC 2017). May 1 - 2, Universiti Teknologi Malaysia.

7. Franklin Bala, Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Mahyuddin Arsat and

Adibah Abdul Latif, “M-Note Application Based on Android System in Learning Orthographic

Projections in Vocational Colleges. ” International Symposium on Innovation Education and

Technology (ISIET 2017). May 11-12, Asia Airport Hotel, Bangkok, Thailand.

8. Mahyuddin Arsat, Nor Fadila Amin, Adibah Abdul Latif and Hasnah Mohamed, “Impact of

Sustainable Design and Computational Thinking Towards Students’ Learning Experience.”

International Symposium on Innovation Education and Technology (ISIET 2017). May 11-12,

Asia Airport Hotel, Bangkok, Thailand.

9. Yusri Kamin, Muhammad Sukri Saud, Nor Fadila Amin and Asnul Dahar Minghat, “Pedagogy

Practices between Australia’s TAFE abd Malaysia’s Community College : Lecturer Views.”

International Symposium on Innovation Education and Technology (ISIET 2017). May 11-12,

Asia Airport Hotel, Bangkok, Thailand.

10. Nurzalina binti Hashim, Muhammad Sukti Saud, Yusri Kamin and Nor Fadila Amin.

“Developing Students’ Higher Order Thingking Skills (HOTS)in the Classroom for Design and

Technology.” International Symposium on Innovation Education and Technology (ISIET 2017).

May 11-12, Asia Airport Hotel, Bangkok, Thailand.

11. Nor Hasmida Mohd. Nor, Nor Fadila Amin, Adibah Abdul Latif and Mahyuddin Arsat (2017).

“Competencies Framework for Elderly Caregivers in Malaysia”. International Conference on

Aplied Psychology and Counseling (ICACP-2017). Feb. 8-9, Le Grandeur Palm Resort, Johor

Bahru, Johor.

12. Adibah Abdul Latif, Mohd. Tajuddin Ninggal, Mashayekhi, Nor Fadila Amin and Mahyuddin

Arsat (2017). “Developing Hierarchical of Mental Health Based on Homesickness : Item

Response Theory Approach”. International Conference on Aplied Psychology and

Caounseling (ICACP-2017). Feb. 8-9, Le Grandeur Palm Resort, Johor Bahru, Johor.

13. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Amin and Arasinah Khamis (2016).

“Resolving the Conundrum of Superior Performers in Organizations: Competency”. Innovative

Practices in Education and Industry Exhibition 2016. March 14. Universiti Teknologi Malaysia,

Skudai.

14. Adibah Abdul Latif, Suheibah Sobaki, Ibnatul Jalilah Yusof and Nor Fadila Amin (2016).

“Kicking Out the Items: Discrimination Index and Item Fit Analysis Approaches”. International

Conference On Education High Order Thinking Skills 2016 (ICES HOTS 2016). April 11 – 13,

Universiti Teknologi Malaysia, Skudai.

15. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nurul Ida

Mohd. Azmi (2016). “International Teaching Practice in Technical and Vocational Education”.

2016 Advanced Research on Business, Management and Humanities (ARBUHUM2016).

March 15 – 17, Bandung, Indonesia.

25

16. Nor Fadila Amin, Adibah Abdul Latif, Mahyuddin Arsat and Nornazira Suhairom (2016).

“Measuring Changing of Problem Solving Ability Using Rasch Measurement Model”. 2016

Advanced Research on Business, Management and Humanities (ARBUHUM2016). March 15

– 17, Bandung, Indonesia.

17. Yusri Kamin, Azlan Abdul Latib Nor Fadila Amin and Muhammad Sukri Saud (2016).

“Technical Skills Competency Level among Students at Vocational Colleges in Malaysia.”



18. Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nor Fadila Amin (2016). “A

Conceptual Model of Scenario Based Learning for Developing Hots in Engineering Education”.



19. Azlan Abdul Latib, Nor Fadila Amin, Muhammad Sukri Saud and Yusri Kamin (2016). “Impact

of a Service Learning Program to the University and the Community”. 2016 Advanced

Research on Business, Management and Humanities (ARBUHUM2016). March 15 – 17,

Bandung, Indonesia.

20. Mahyuddin Arsat, Nor Fadila Amin, Adibah Abdul Latif and Rashidah Arsat (2016).

“Integrating Sustainability in a Student-Centered Learning Environment for Engineering”. 2016

Advanced Research on Business, Management and Humanities (ARBUHUM2016). March 15

– 17, Bandung, Indonesia.

21. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Mohd. Amin, Dayana Farzeeha Ali

and Umawathy Techanamurthy (2016). “A Framework of Culinary-Specific Competencies for

Sustainable Professional Development in Gastronomic Tourism.” 2016 1st International

Conference on Information in Business and Technology. November 26 – 28, Melaka :

MALTESAS.

22. Crystal Joan Peter, Wilfredo Herrera Libunao, Nor Fadila Amin, Adibah Abdul Latif and

Mahyuddin Arsat (2016).” Preliminary Research on Sustainable Development Integration in

Malaysian University”. Technical And Vocational Education & Training International

Conference 2016 (TVETIC 2016). November 18 – 20, KSL Hotel and Resort , Johor Bahru.

23. Nadiah Yusof, Mahyuddin Arsat, Nor Fadila Amin, and Adibah Abdul Latif (2016). “Malaysia's

Model for Sustainable Campus”. Technical And Vocational Education & Training International

Conference 2016 (TVETIC 2016). November 18 – 20, KSL Hotel and Resort , Johor Bahru.

24. Nor Fadila Amin, Adibah, Abdul Latif, Wilfredo Herrera Libunao, Sarimah Ismail, Mahyuddin

Arsat and Nornazira Suhairom (2015). "The Application of Rasch Measurement Model in

Measuring Changes of Students' Perceptions on Their Problem Solving Ability." 1st

International Conference of Educational Studies (ICES2015). June 3 - 4, Pulai Spring Resort,

Johor Bahru, Johor.

25. Leong Ting Chee, Nor Fadila Amin, Adibah Abdul Latif and Siti Aisyah Muhammad (2015).

"Development of Teaching and Learning Module to Enhance Creativity of Preschoolers. " 1st

International Conference of Educational Studies (ICES2015). June 3 - 4, Pulai Spring Resort,

Johor Bahru, Johor.

26. Adibah Abdul Latif, Ibnatul Jalilah Yusof, Nor Fadila Mohd. Amin and Wilfredo Herrera

Libunao (2015). "Score Interpretation Using Classical Test Theory and Item Response

26

Theory." 1st International Conference of Educational Studies (ICES2015). June 3 - 4, Pulai

Spring Resort, Johor Bahru, Johor.

27. Nor Aisyah Che Derasid, Aede Hatib Musta'amal , Nor Fadila Amin and Abdul Rashid

Hussain (2015). "Content Validity for Innovation Level of UTM undergraduate Students : A

QUalitative Approach." 1st International Conference of Educational Studies (ICES2015). June

3 - 4, Pulai Spring Resort, Johor Bahru, Johor.

28. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Mohd. Amin and Adibah Abdul Latif

(2015). “Reliability and Validity Evidence of Instrument Measuring Competencies for Superior

Work Performance”. Proceedings of Pacific Rim Objective Measurement Symposium

(PROMS) 2015 Conference. Aug 20 – 24, Singapore : Springer, 323 – 338.

29. Nornazira Suhairom, Aede Hatib Musta'amal, Nor Fadila Mohd. Amin and Noor Khairul

Anuar Johari (2014). "The Needs for the Development of Instrument for Measuring Culinary

Competencies Among Malaysian Chefs". The 3rd International Conference on Humanities and

Social Sciences (ICHSS2014). June 3 - 5, Kuala Lumpur Convention Centre.

30. Nornazira binti Suhairom, Aede bin Musta’amal and Nor Fadila binti Mohd. Amin (2014).

“Validity and Reliability of Instrument Measuring Culinary Competencies : The Rasch

Measurement Model.” Proceedings of the 1st International Postgraduate Seminar 2014. 23 –

24 November. Johor Bahru : Faculty of Education, UTM, 1 – 5.

31. Mashitoh Mahadi, Nor Fadila Mohd. Amin, Adibah Abdul Latif, Aede Musta'amal, Sarimah

Ismail, Mohd. Safarin Nordin and Mohd. Najib Ghaffar (2013). “Pembangunan Instrumen Gaya

Penyelesaian Masalah dalam Kalangan Pelajar Pendidikan”. Proceedings of the 2nd

International Seminar on Quality and Affordable Education (ISQAE2013). Oct 7 – 10. Johor

Bahru, Johor, 500 – 505.

32. Kamalularifin Subari, Maliani Mihamad, Nor Fadila Mohd. Amin, Asnul Dahar Minghat,

Sarimah Ismail and Yusri Kamin (2013). "Meninjau Kemahiran Insaniah Pelatih Institut Latihan

Perindustrian (ILP) dalam Kerjaya. " Proceedings of the 2nd International Seminar on Quality

and Affordable Education (ISQAE2013). Oct 7 – 10. Johor Bahru, Johor, 40 – 44.

33. Sarimah Ismail, Wan Zulkhairi Zakaria and Nor Fadila Amin (2013). "Struktur Kurikulum

Program Diploma Pendidikan Lepasan Ijazah Pendidikan Teknikal dan Vokasional. "

Proceedings of the 2nd International Seminar on Quality and Affordable Education

(ISQAE2013). Oct 7 - 10, Johor Bahru, Johor, 482 – 490.

34. Aede Hatib Musta'amal, Norzanah Rosmin, Nor Fadila Mohd. Amin and Yahya Buntat

(2013). "Rekacipta : Ke Arah Pemupukan Budaya Kreatif dan Inovatif." Proceedings of the 2nd

International Seminar on Quality and Affordable Education (ISQAE2013). Oct 7 - 10, Johor

Bahru, Johor, 229 - 233

35. Mohd. Safarin bin Nordin, Nor Fadila binti Mohd. Amin, Kamalularifin bin Subari and Mohd.

Zolkifli bin Abdul Hamid (2012). "Visualization Skills and Learning Style Patterns Among

Engineering Students at Universiti Teknologi Malaysia." World Conference on Learning,

Teaching and Administration (WCLTA 2012), Oct 28 - 30, University of Barcelona, Barcelona,

Spain.

36. Adibah Abdul Latif, Zairul Nur Deana Md. Desa, Mohd. Najib Ghaffar and Nor Fadila Amin

(2011). "Development and Validation of Moral Assessment Instrument for Higher Education

Students." International Conference on Measurement and Evaluation in Education

27

(ICMEE2011). Oct 10 - 12, Univesiti Sains Malaysia, Penang.

37. Wilfredo Herrera Libunao, Adibah Abdul Latif, Nor Fadila Mohd. Amin and Dayang Hjh Tiawa

Abd. Hamid (2011). "Assessing the Utilization of Research Findings in technical and

Vocational Education Policy Making in Malaysia." International Conference on Measurement

and Evaluation in Education (ICMEE2011). Oct 10 - 12, Univesiti Sains Malaysia, Penang.

38. Nor Fadila Mohd. Amin and Muhammad Sukri Saud (2010). "e-Product Design : Learning

Design in Web-based Learning Environment." ." International Conference on VTET Research

and Networking. June 23 - 24, Brunei Darussalam.

39. Muhammad Sukri Saud, Muhammad Rashid Rakuddin, Sarimah Ismail, Mohd. Safarin Nordin,

Asnul Dahar Minghat, Kamalulariffin Subari, Nor Fadila Mohd. Amin, Mohd. Zulkifli Abdul

Hamid & Mahyuddin Arsat (2010). "ICT Application in Vocational and Technical Education

anfd Training (TVET) Institutions in malaysia." International Conference on VTET Research

and Networking. June 23 - 24, Brunei Darussalam.

40. Nor Fadila Amin, Muhammad Sukri Saud, Sarimah Ismail and Widad Othman (2007).

"eProductDesign : A New Perspective of Teaching and Learning Product Design for Adult."

The 2007 International Conference on e-Commerce, eAdministration, e-Society and e-

Education (e-CASE2007). Aug 15 - 17, Hong Kong.

41. Sarimah Ismail, Muhammad Sukri Saud, Nor Fadila Mohd. Amin and Mohd. Rizal Mohd.

Said (2007). "Customer Satisfaction Model of Malaysian Malay Restaurants." The 8th

International Joint World Cultural Tourism Conference. Nov 16 - 18, Busan, South Korea.

42. Widad Othman, Muhammad SUkri Saud and Nor Fadila Amin (2006). "How Can Web-based

:earning System Enhances Adults Learning in Product Design." 6th Annual South East Asian

Association for Institutional Research Conferences. Sept 5 - 7, Langkawi, Kedah.

43. Muhammad Sukri Saud, Nor Fadila Mohd. Amin, Widad Othman and Megat Aman Zahiri

Megat Zakaria (2005). " E-Learning Computer Technology Skills and Knowledge for Technical

and Vocational Teachers in Malaysia." International Symposium on E-Learning. July 25 - 26.,

Universiti malaysia Sabah, Sabah.

Proceedings/Conference (others)

1. Mahyuddin Arsat, (2016). “Sustainability and Innovation in Teacher Education Program”.

Proceedings of Seminar Kebangsaan Majlis Dekan Pendidikan Universiti Awam 2016.

November 13 – 15. TH Hotel, Bayan Lepas, Pulau Pinang, 32 – 38.

2. Asnul Dahar Minghat, Nor Fadila Amin, Ruhizan M. Yasin and Ramlee Mustapha (2012).

"Pembinaan Indikator Kelestarian Pendidikan Teknikal dan Voksional Sekolah Menengah

Harian Melalui Kajian Delphi." Seminar Kebangsaan Majlis Dekan Pendidikan IPTA

(MEDC2012). Oct 7 - 10, Johor Bahru, Johor.

3. Mohamad Bilal Ali, Lokman Mohd. Tahir, Meor Ibrahim Kamaruddin, Mohd. Ali Ibrahim

Megat Aman Zahiri Megat Zakaria, Nor Fadila Mohd. Amin, M. Al-Muzzamil Yasin and

Muhammad Sukri Saud (2011). "Penilaian Hasil Pembelajaran Program Latihan Mengajar :

Praktikaliti di Universiti Teknologi Malaysia." Seminar Majlis Dekan-Pendidikan IPTA

(MEDC2011). Sepr 27 - 28, Universiti Putra Malaysia, Serdang, Selangor.

28

4. Zainuddin Abu Bakar, Meor Ibrahim Kamaruddin, Nor Fadila Mohd. Amin, Mohd. Ali

Ibrahim, Megat Aman Zahiri Megat Zakaria and M. Al-Muzzamil Yasin (2010). "Creativity in

Teaching and Learning in the Faculty of Education of Malaysian Public Universities."

Seminar Majlis Dekan-Pendidikan IPTA (MEDC2010). Aug 2-3, Shah Alam, Selangor.

5. Nor Fadila Mohd. Amin and Muhammad Sukri Saud (2008). "Pelaksanaan Kursus Reka

Cipta : Pengalaman Pengajaran dan Pembelajran di UTM". Educational Postgraduate

Research Seminar (EDUPRES 2008). Dec 25 - 27, Universiti Teknologi Malaysia, Johor.

6. Muhammad Sukri Saud, Sarimah Ismail, Mohd. Safarin Nordin and Nor Fadila Mohd. Amin

(2005). "E-Learning Computer Technology : Issues and Challenges for Technical and

Vocational Teachers." Seminar Kebangsaan ICT dalam Pendidikan. Nov 17 - 19, Kuala

Lumpur.

7. Nor Fadila Mohd. Amin and Widad Othman (2004). "Pembinaan dan Penilaian Sistem

Pembelajaran Berasaskan Web Asas Reka Cipta Berdasarkan Teori Pembelajaran Dewasa :

Satu Kertas Konsep." National Conference on Graduate Research in Education. Sept. 11,

Universiti Putra Malaysia, Serdang, Selangor.

8. Nor Fadila Mohd. Amin and Widad Othman (1999). "Cabaran Pelaksanaan Mata Pelajaran

Elektif KBSM Lukisan Kejuruteraan di Sekolah Menengah Atas." Malaysia Educational

Research Association-Educational Research Association of Singapore Joint Conference

(MERA-ERA1999). December, Malacca.

COURSE/WORKSHOPS

1. Curriculum Design, Management and Development Level 3, AKEPT, 1 – 2 October 2017.

2. Curriculum Design, Management and Development Level 2, AKEPT, 21 – 22 August 2017.

3. Bengkel Bimbingan Tenaga Pengajar Kursus Tamadun Islam & Tamadun Asia (TITAS),

Kursus Hubungan Etnik dan Kursus Kenegaraan Malaysia, UUM, 16 – 17 August 2017.

4. Curriculum Design, Management and Development Level 1 I(Introductory), AKEPT, 25 – 26

July 2017.

5. The Course Outline of University General Courses, UTM 17 April 2017.

6. The Implementation of University General Courses, UTM, 10 July 2017.

7. The Teaching of Credited Co-Curriculum Courses - PUPW Diploma Programme, UTMKL; 9

June 2017.

8. Curriculum Design, Management and Development Level 1 I(Introductory), AKEPT, 25 – 26

July 2017.

9. Scholarship of Teaching and Learning – Advanced Level, Centre for Teaching and Learning

(CTL), UTM ; 12 – 13 October 2016.

29

REFEREES

1. Name : Professor Dr. Baharuddin bin Aris

Designation : Professor

Admin Position : Dean, Faculty of Education, UTM

Address : Faculty of Education


81310 Johor Bahru, Johor MALAYSIA

Contact no : +607 5534258


2. Name : Assoc. Prof. Dr. Muhammad Sukri Saud

Designation : Assoc. Prof.

Admin Position : Deputy Dean

(Research, Innovation, Community and Network)

Address : Faculty of Education


81310 Johor Bahru, Johor MALAYSIA

Contact no : +607 5534405


curriculum vitae - educ.utm.my file2 award and honors received 2016 : silver award for “resolving...

Documents