curriculum vitae · dubai. ii) august 2018 technical evaluator for tender “solar – house...

1

CURRICULUM VITAE

PERSONAL DETAILS

Name : Shek Poi Ngian Nationality : Malaysian Tel : (Mobile) : 0127980928 (Office): 075531627

(Fax): 075576841 E-mail : [email protected], [email protected] Website : http://people.utm.my/shekpoingian/ Expertise : Steel connection, steel and concrete composite structures, Interlocking

brick system ACADEMIC QUALIFICATIONS Year : 2009 Doctor of Philosophy in Civil Engineering (Structure) Universiti Teknologi Malaysia Year : 2005 Bachelor in Civil Engineering Universiti Teknologi Malaysia AWARD AND HONORS RECEIVED

Date : Awards/Achievement

i) October 2018 – Bronze Award for 20th Industrial Art and Technology Exhibition (INATEX 2018)

ii) September 2018 – Silver Award in New Academia Learning Innovation for Education 4.0, NALI 2018 Exhibition & Competition.

iii) February 2018 – Gold Medal for Invention & Innovation Awards 2018, Malaysia Technology Expo 2018 (MTE 2018)

iv) November 2017 – Bronze award for 19th Industrial Art and Technology Exhibition (INATEX 2017)

v) July 2017 – Special award for SWA Accreditation Faculty of Civil Engineering

vi) August 2016 – Gold Medal for 2016 International Invention Innovation Competition in Canada, iCAN

vii) May 2016 – Gold Medal for 27th International Invention, Innovation & Technology Exhibition 2016 (ITEX)

mailto:[email protected]

mailto:[email protected]

http://people.utm.my/shekpoingian/

2

viii) February 2016 – Silver Medal for Malaysia Technology Expo and Invention & Innovation Competition 2016 (MTE 2016)

ix) November 2015 – Silver Medal for 17th Industrial Art and Technology Exhibition (INATEX) 2015

x) February 2013 - Bronze Award for 12th Malaysia Technology Expo and Invention & Innovation Competition 2013 (MTE 2013)

xi) November 2012 – Best Researcher – Research Grant in Construction Research Alliance

xii) October 2012 – Silver Award for 14th Industrial Art and Technology Exhibition (INATEX) 2012

xiii) October 2012 – “Anugerah Perkhidmatan Cemerlang” sempena Majlis Anugerah Kecemerlangan & Penghargaan (Citra Karisma)

xiv) November 2011 – Bronze Award for 13th Industrial Art and Technology Exhibition (INATEX 2011)

PROFESSIONAL EXPERIENCE

Date : Positions/Employer i) 16 Mac 2010 – present – Senior Lecturer, Universiti

Teknologi Malaysia ii) 1 Nov 2012 – 31 Oct 2013 – Design Engineer,

Perunding DMMT JOURNAL EDITOR/EDITORIAL/ADVISORY PANEL

i) Editorial Board Member, Jurnal Teknologi (Sciences & Engineering) Vol 74, No 4: Special Issue on Advances in Sustainable Structure, Construction, Building and Urban Research.

ii) Editorial Board Member, Jurnal Teknologi (Sciences & Engineering) Vol 77, No 16: Research Advances in Sustainable Structure, Material and Construction

3

ADMINISTRATIVE EXPERIENCE Faculty Level

Date : Positions/Employer

i) July 2018 – Coordinator, for Engineering Doctorate (Technology and Construction Management) Programme SKA (semester I & II 2018/2019)

ii) October 2018 – member for Emergency Response Team School of Civil Engineering, Faculty of Engineering.

iii) October 2018 – committee member (sponsorship) for international UTM Bridge model competition (UTMBridge 2019)

iv) September 2018 – committee member for UTM Civil Engineering Alumni Dinner (UTM-CEAD) 2019

v) June 2018 – supervisor for Industrial Training SKA session 2017/2018.

vi) March 2018 – committee member for Academic Postgraduate Programme SKA.

vii) March 2018 – committee member for Curriculum And Sillybus Postgraduate Programme SKA.

viii) March 2018 – Assistant Chairman for PhD VIVA ix) January 2018 – Coordinator, for Engineering

Doctorate (Technology and Construction Management) Programme SKA (semester I & II 2017/2018)

x) December 2017 – member for Strategic Planning SKA 2018

xi) October 2017 – committee member Study Circle (Non Muslim) FKA

xii) October 2017 – Committee member for ISO 9001:2008 FKA

xiii) July 2017 – Coordinator, for Engineering Doctorate (Technology and Construction Management) Programme FKA (semester I & II 2016/2017)

xiv) July 2016 – Coordinator, for Engineering Doctorate (Technology and Construction Management) Programme FKA (semester I & II 2015/2016)

xv) Mac 2016 – Committee member for ISO 9001:2008 FKA

xvi) January 2016 – Committee member for Jawatankuasa Akademik (JKAPG) Postgraduate FKA

4

xvii) May 2016 – committee member (sponsorship) for international UTM Bridge model competition (UTMBridge 2017)

xviii) July 2016 – Editor of book chapter on “Structural Behaviour of Innovative Constructional Steel”

xix) February 2016 – committee member Study Circle (Non Muslim) FKA

xx) May 2016 – committee member for seminar on “Non-destructive evaluation (NDE) for building condition assessment”

xxi) November 2016 – secretariat for interactive course on non-destructive evaluation (NDE) for building condition assessment (NDE 2016)

xxii) April 2015 - committee member (sponsorship) for UTM Bridge 2015 model competition (UTMBridge 2015)

xxiii) March 2015 – task force head on “strengthen UTM alumni network”

xxiv) March 2015 – task force head on “to enforce all research and taught course PG students to publish”

xxv) September 2012 – committee member for Joint Conference GEOTROPIKA & ICONBUILD : GEOCON 2013

xxvi) September 2014 – coordinator of strategic planning workshop focus group for Construction Research Alliance 2014

xxvii) March 2014 – Reviewer for Research Seminar Civil Engineering (SEPKA 2014)

xxviii) March 2012 – Judge to the event of Mini Tower Competition in conjuction with UTMOST Imagination 2012.

xxix) January 2012 – committee member for Anual Report FKA

xxx) February 2012 – committee member for bridge model competition 2012

xxxi) October 2012 – fasilitator for research methodology course semester 1 session 2012/2013.

xxxii) September 2011 – student advisor for Asia Pacific Universities Build & Break Competition 2011

xxxiii) March 2011 – Research Follow in Steel Technology Centre (STC)

xxxiv) August 2010 – committee member for coordination of Adjunct Professor Department of Structures and Materials, Dato’ Seri Ir. Dr. Judin bin Abdul Karim

5

xxxv) October 2010 – present - evaluator for PhD first stage presentation

xxxvi) October 2010 – present - evaluator for MEng first stage presentation

University Level

Date : Positions/Committe

i) November 2018 – Member of Team MIZANHOME for Solar Decathlon Middle East 2018 Competition, Dubai.

ii) August 2018 – technical evaluator for tender “Solar house 6.825KWP rooftop solar photovoltaic system for Solar Decathlon Middle East, Dubai.”

iii) January 2018 – supervision for CSR program “Projek Perintis My Beautiful New Home (MYBNHOME) at Slim River, Perak

iv) December 2017 – supervision for CSR program “Projek Perintis My Beautiful New Home (MYBNHOME) at Slim River, Perak

v) May 2017 - Technical evaluator proposal GUP 2018/1 niche area Innovative Engineering

vi) January 2017 – Structural engineer for Solar Decathlon Middle East (SDME 2018), Dubai

vii) May 2016 – Technical evaluator proposal GUP 2016/1 niche area Innovative Engineering

viii) December 2016 – secretariat for the operning ceremony of UTM Eco-Home

ix) December 2016 – Structural engineer of UTM Eco-Home

x) December 2015 – editorial board for Jurnal Teknologi Special Issue: Research Advances in Sustainable Structure, Material and Construction

xi) October 2015 – Technical evaluator proposal GUP 2015/3 niche area Innovative Engineering

xii) June 2015 – committee member for tender evaluation of UTM Eco-Home Project

xiii) May 2014 – editorial board Jurnal Teknologi – Special Edition (Construction Structure and Material)

xiv) March 2014 – Researcher Project Solar Home UTM xv) March 2012 – Member of Team Solar Home UTM for

Solar Decathlon China 2013 Competition.

6

NATIONAL COMMITTEE

i) Technical committee on Steel for Structural Purposes (TC/P/3), SIRIM

INTERNATIONAL APPOINTMENT/COMMITTEE

i) Reviewer for the 10th Asia Pacific Structural Engineering and Construction Conference (APSEC 2018), 13 – 15 November 2018, Langkawi, Malaysia.

ii) Invited speaker for public lectures, supervision for experimental testing, evaluator for PhD presentation at Universitas Sriwijaya, 16 – 18 October 2018.

iii) Moderator for The Third International Conference on Construction and Building Engineering (ICONBUILD 2017): 14 – 17 August 2017, Palembang, Inodonesia.

iv) Reviewer for The Third International Conference on Construction and Building Engineering (ICONBUILD 2017): 14 – 17 August 2017, Palembang, Inodonesia.

v) Scientific reviewer for the special issue on Global Congress on Construction, Material and Structural Engineering 2017 (GCOMSE 2017), Malaysian Construction Research Journal (MCRJ)

vi) Invited speaker for public lectures, supervision for experimental testing, evaluator for PhD presentation at Universitas Sriwijaya, 10 – 13 February 2017.

vii) International Scientific Commmittee and Technical Committee Member for The Third International Conference on Construction and Building Engineering (ICONBUILD 2017): 14 – 17 August 2017, Palembang, Inodonesia.

viii) Reviewer for special issues of Pertanika Journal of Science & Technology (JST) – Advances in Science and Technology Research.

ix) Reviewer for Jurnal Teknologi (Science and Engineering) x) Reviewer for KSCE Journal of Civil Engineering xi) Assistant secretary (UTM Organizing Committee) of 2nd International

Conference on Construction and Building Engineering (ICONBUILD 2015) xii) International Scientific Committee and Technical Committee Member (Section

Head – Structures) for the 2nd International Conference on Construction and Building Engineering 2015 (ICONBUILD 2015)

xiii) Moderator for the 2nd International Conference on Construction and Building Engineering 2015 (ICONBUILD 2015)

xiv) Reviewer for International Conference on Advanced Science, Engineering and Technology (ICASET) 2015: Advanced Science, Technology and Engineering: Lighting the Way Towards Sustainable Future

xv) Reviewer for 2nd International Conference on Construction and Building Engineering (ICONBUILD 2015)

xvi) Committee member of The 3rd Technical Conference on Hydraulic Engineering (CHE 2014)

xvii) Reviewer Jurnal Teknologi – Special Issue (Sustainability and Construction Management)

xviii) Session Chairman for the 1st International Conference on The Science & Engineering of Materials (ICOSEM 2013)

7

xix) Chairperson in the event of Joint Conference GEOTROPIKA & ICONBUILD: GEOCON 2013.

xx) Reviewer for the 4th International Graduate Conference on Engineering, Science and Humanities (IGCESH 2013)

xxi) Reviewer for Malaysian Journal of Civil Engineering (MJCE) PROFESSIONAL MEMBERSHIP AND RECOGNITION

i) Member, Institute Engineer Malaysia, Membership No.: G27125, (2007 – present)

ii) Member, Malaysian Society for Engineering & Technology (mSeT), Membership No: 00568, (2010 – present)

iii) Member, Malaysian Structural Steel Association (MSSA), Membership No: OM-1031, (2014 – present)

iv) Member, Society of Engineering Education Malaysia (SEEM), Membership No: P0138, (2012 – present)

TEACHING EXPERIENCES UNDERGRADUATE COURSES TAUGHT

Semester Sem Subject Code

Subject Credit Hour

No. of Students

2010/2011 1 SAB2223 Mekanik Bahan Dan Struktur 3 53

2010/2011 2 SAB4223 Analisis Struktur 3 65

2010/2011 2 SAB3233 Rekabentuk Struktur Keluli & Kayu 3 52

2011/2012 1 SAB2223 Mekanik Bahan Dan Struktur 3 53

2011/2012 2 SAB4223 Analisis Struktur 3 48 2012/2013 1 SKAA1213 Mekanik Kejuruteraan 3 39


2013/2014 1 SKAA2012 Makmal Kejuruteraan Awam 1 2 81

2013/2014 1 SKAA2223 Mekanik Bahan Dan Struktur 3 48


2013/2014 2 SKAA3233 Rekabentuk Struktur Keluli & Kayu 3 46


8



2014/2015 1 SAB1042 Makmal Kejuruteraan Awam 1 2 2


















Total 85 1302

9

RESEARCH EXPERIENCES RESEARCH PROJECT UNDERTAKEN Date : Project Leader/Project Member

i) Project Leader, Development of Lightweight Foam Concrete for Structural Application (VOT18H02) Research University Grant (GUP Tier 1). Budget approved RM40,000. Project duration: 1/7/2017 – 30/6/2019

ii) Project Leader, “Fire Resistance of Interlocking Brick Column under Normal Working Load (VOT03G60)” Flagship Grant (RUG of UTM). Budget approved RM50,000. Project duration:15/09/2016 - 14/09/2018

iii) Project Leader, “Smart Lightweight Innovative Modular Panel System (Slim) Using Cold-Formed Steel Section (VOT11H32)” Research University Grant (GUP Tier 1). Budget approved RM50,000. Project duration: 15/11/2015 - 14/11/2017

iv) Project Leader, “Development of Partial Strength Connection for Cruciform Column Section in Low Rise Structures (VOT06H59)” Research University Grant (GUP Tier 1). Budget approved RM45,000. Project duration: 1/4/2014 – 30/9/2015

v) Project Leader, “Development of New Technologies for Interlocking Brick Block Construction (VOT 03H77)” Research University Grant (GUP Tier 1). Budget approved RM140,000. Project duration: 1/12/2012 – 30/12/2014.

vi) Project Leader, “Analytical Study of Blind Bolted Connections to Structural Hollow Sections (VOT 00J18)” University Grant (GUP Tier 2). Budget approved RM40,000. Project duration: 1/4/11 – 31/3/12.

vii) Project Leader, “Parametric Study of Cruciform Column Sections in Multi-storey Un-braced Steel Frame Design (VOT 77966)” UTM Short Term Grant. Budget approved RM20,000. Project duration: 1/8/10 – 31/7/11.

viii) Project Member, HIR 7.2: Thermal Properties and Behavior of Effective Microorganisms (Em) Concrete. University Grant (HIR). Approved budget RM75,000 (2018).

10

ix) Project Member, A Study on The Use of Nano Materials and Microorganism For Sustainable And Maintenance Free Concrete. University Grant (COE). Approved budget RM50,000 (2018).

x) Project Member, Performance of Rubberized Pozzolanic Concrete Filled Hollow Steel Column Subjected to Cyclic Loadings. University Grant (GUP Tier 1). Budget approved RM37,600 (2017).

xi) Project Member, Flexural Behaviour Of Innovative Cold-Formed Encased Composite Beam. University Grant (GUP Tier 2). Budget approved RM20,000 (2017).

xii) Project Member, Heutagogy Framework for Structural Steel Design in Civil Engineering Curriculum. University Grant (GUP Tier 1). Budget approved RM40,000 (2017).

xiii) Project Member, Right Technology to Power Affordable Housing. University Grant (GUP Tier 1). Budget approved RM40,000 (2017).

xiv) Project Member, Sustainable Concrete Performance Evaluation for Climate Change Effect in Asia Region. Matching Grant (RUG of UTM). Budget approved RM150,000 (2016).

xv) Project Member, Prediction Model on Hydration Temperature of Palm Oil Fuel Ash Concrete using Advanced Software. Matching Grant (RUG of UTM). Budget approved RM150,000 (2016).

xvi) Project Member, Landslides Assessment in Korea and Malaysia Region with Climite Change. Matching Grant (RUG of UTM). Budget approved RM150,000 (2016).

xvii) Project Member, Structural Behavior of Composite Beam used in Self-Compacting Concrete Integrated with Cold-Formed Steel Section. Matching Grant (RUG of UTM). Budget approved RM150,000 (2016).

xviii) Project Member, Innovative Modular Pile Cap System using Cold-formed Steel Section for Building Foundation. GUP Tier 1 (RUG of UTM). Budget approved RM150,000. (2016)

xix) Project Member, Maximizing Building Information Modeling (BIM) Functions in Integrated Project Delivery System. GUP Tier 1 (RUG of UTM). Budget approved RM50,000. (2016).

11

xx) Project Member, Development of High Strength Hollow Interlocking Brick System (HIBS) using Fly Ash and Volcanic Ash. GUP Tier 1 (RUG of UTM). Budget approved RM50,000. (2014)

xxi) Project Member, Fast Track Construction of Composite Floor System with Cold-Formed Steel Section. GUP Tier 1 (RUG of UTM). Budget approved RM50,000. (2014)

xxii) Project Member, Geometrical effects of bioinspired whale flipper's tubercles on hydro turbine blade performance. GUP Tier 1 (RUG of UTM). Budget approved RM140,000. (2012)

xxiii) Project Member, Exploring The Interaction of Composite Beam and Slab for Multi-Storey Frame with Interlocking Brick System Produced Locally as Industrialized Building System. GUP Tier 1 (RUG of UTM). Budget approved RM140,000. (2012)

xxiv) Project Member, Structural Performance on Cold-formed Steel Joint for House-in-a-Box System. GUP Tier 2 (RUG of UTM). Budget approved RM35,000. (2012)

xxv) Project Member, Investigation on Precast Floor Panel using Lightweight Concrete and Cold-formed Steel Section. GUP Tier 2 (RUG of UTM). Budget approved RM40,000 (2011)

xxvi) Project Member, Innovative Construction Using Cold-Formed Steel Sections For Light Steel Structures For Industrialised Building System. GUP Tier 1 (RUG of UTM). Budget approved RM170,000. (2011)

xxvii) Project Member, Analytical Models for Strength of Composite Joints in Light Steel Framing. GUP Tier 2 (RUG of UTM). Budget approved RM40,000. (2011)

FUNDAMENTAL RESEARCH GRANT SCHEME (FRGS FUND) Date : Project Leader/Project Member

i) Project Leader, Investigative Study of Partial Strength Connection On Both Axes of Cruciform Column (CCUB) Section (VOT 4F050) Fundamental Research Grant Scheme (FRGS 2010/2). Budget approved RM50,000. Project duration: 1/1/11 – 31/12/12.

ii) Project Member, A Theoretical Model to Enhance Community Acceptance of Migrant Labour

12

Settlement in Malaysia. FRGS. Approved budget RM86,200 (2019).

iii) Project Member, Buckling Resistance Factor for Build-up Cold-Formed Steel Slender Column under Elevated Temperatures. FRGS 2015. Budget approved RM70,200.

iv) Project Member, Innovative Construction of Floating Light-Weight Affodable House Designed for Flood Resistant. FRGS 2015. Budget approved RM69,400.

v) Project Member, Innovative Design and Technology for Sustainable Post Disaster Settlement. FRGS 2015. Budget approved RM75,700.

vi) Project Member, Formilated Elementary Strnegth and Stability Equations for Thin-Walled Behaviour of Cold-Formed Steel Joints in Rapid Building-in-Box System (RaBiB). FRGS 2013. Budget approved RM67,000.

EXPLORATORY RESEARCH GRANT SCHEME (ERGS FUND) Date : Project Leader/Project Member

i) Project Member, Exploration Of Woodpecker's Head Mechanics For Development Of A New Structural Impact Resistance. ERGS 2013. Budget approved RM112,000

CONTRACT RESEARCH PROJECT AWARDED BY Jabatan Kerja Raya Malaysia (JKR) SHRE Date : Project Leader/Project Member

i) Project Leader, RNP3-Solid Material Diverter (SOLMAD). Contract Research with JKR SHRE. Budget approved RM109,000 Project duration: 1/11/2013 – 29/2/2016.

ii) Project Member, RNP2-Hydrokinetic Turbine Anchoring System (HTAS). Contract Research with JKR SHRE. Budget approved RM79,000. (2013)

13

CONTRACT RESEARCH PROJECT AWARDED BY MINISTRY OF HIGHER EDUCATION Date : Project Leader/Project Member

i) Project Member, An Innovative Construction and Production Method of Interlocking Brick System for Green Building Construction. Translational Research Grant (Ministry of Education). Budget Approved RM500,000 (2017).

INTERNATIONAL CONTRACT RESEARCH PROJECT AWARDED Date : Project Leader/Project Member

i) Project Member, Sustainable High-Performance Materials for Climate Change. Research Grant from Yonsei University. Budget approved RM150,000 (2016).

ii) Project Member, Structural Behavior of Composite Connection used in Pre-Cast Concrete Integrated with Cold-formed Steel Section used in Construction Industry. Research Grant from Universitas Sriwijaya. Budget approved RM150,000. (2016)

iii) Project Member, Real Time Monitoring of Geo-Disaster due to Climate Change. Research Grant from Yonsei University. Budget approved RM150,000. (2016)

iv) Project Member, Microstructure and Hydration Model of POFA Concrete. Research Grant from Hanyang University. Budget approved RM150,000. (2015)

PATENT GRANTED

i) Mahmood Md Tahir et al., A Prefabricated Pad Footing Foundation Constructed Using Cold-Formed Steel Sections (PI 2008 3336)

PATENT FILED/DISCLOSURE

i) Haryati binti Yaacob et al. Self Assessment Report For Self Accreditation : Master In Engineering Transportation (LY2018006224 Copyright UTM)

ii) Shek Poi Ngian, Shahrin Mohammad, copyright of book chapter “Structural Behaviour of Innovative Constructional Steel” (ISBN 978-983-52-1276-5)

iii) Shek Poi Ngian et al. Wall Frame Type 1 (15-00326-0112 Registered Industrial Design)

iv) Shek Poi Ngian et al. Wall Frame Type 2 (15-00332-0212 Registered Industrial Design)

v) Shek Poi Ngian et al. Wall Frame Type 3 (15-00333-0312 Registered Industrial Design)

14

vi) Shek Poi Ngian et al. Wall Frame Type 4 (15-00334-0412 Registered Industrial Design)

vii) Shek Poi Ngian et al. Wall Frame Type 5 (15-00335-0512 Registered Industrial Design)

viii) Shek Poi Ngian et al. Wall Frame Type 6 (15-00336-0612 Registered Industrial Design)

ix) Shek Poi Ngian et al. Wall Frame Type 7 (15-00337-0712 Registered Industrial Design)

x) Shek Poi Ngian et al. Wall Frame Type 8 (15-00338-0812 Registered Industrial Design)

xi) Shek Poi Ngian et al. Wall Frame Type 9 (15-00339-0912 Registered Industrial Design)

xii) Shek Poi Ngian et al. Wall Frame Type 10 (15-00340-1012 Registered Industrial Design)

xiii) Shek Poi Ngian et al. Wall Frame Type 11 (15-00341-1112 Registered Industrial Design)

xiv) Shek Poi Ngian et al. Wall Frame Type 12 (15-00342-1212 Registered Industrial Design)

xv) Shek Poi Ngian, Arizu Sulaiman, Mohd Yunus Ishak. Teaching Material for SAB2223 Mechanics of Material & Structures (Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License) (Copyright for OpenCourseware Universiti Teknologi Malaysia)

xvi) Shek Poi Ngian et al. New Concept of Cruciform Column Steel Sections Formed using Universal Beam (Copyright Universiti Teknologi Malaysia)

xvii) Shek Poi Ngian et al. Retrofitted Flush End-Plate Connection with Built-Up Hybrid Beam Section (Copyright Universiti Teknologi Malaysia)

xviii) Shek Poi Ngian et al. Retrofitted Extended End-Plate Connection with Built-Up Hybrid Beam Section (Copyright Universiti Teknologi Malaysia)

xix) Tan Cher Siang et al. Prefabricated Connector (MY 10-00837-0105 Industrial Design)

xx) Tan Cher Siang et al. Prefabricated Connector (MY 10-00838-0205 Industrial Design)

xxi) Tan Cher Siang et al. Prefabricated Connector (MY 10-00839-0305 Industrial Design)

xxii) Tan Cher Siang et al. Prefabricated Connector (MY 10-00840-0405 Industrial Design)

xxiii) Tan Cher Siang et al. Prefabricated Connector (MY 10-00841-0505 Industrial Design)

15

SUPERVISION

PhD Student

Year No. Name Status Title Roles of Supervision

2012 1 Tan Boon Kai Ongoing

Behavior Of Beam To Column Connections With Double Channelcold Formed Steel Sections

Main Supervisor

2012 2 Woon Chin Peow Ongoing

Engineering Properties Of Bio-Inspired Mortar Using Seashell

Main Supervisor

2019 3 Mu Ker Shin Graduated

Geometrical Effects Of Bio-Inspired Whale Flipper Tubercles On Hydro Turbine Blade Performance

Main Supervisor

2019 4 Tan Boon Cheik Graduated

Moment Rotation Behaviour Of End-Plate Connection Using Cruciform Column Section

Main Supervisor

2017 5 NURIZATY

BINTI ZUHAN

Ongoing

Performances of Pozzolanic Concrete Filled Steel Hollow Short Column Subject to Fire Loading

Co-Supervisor

2017 6 CHAI TECK JUNG Ongoing

Prefabricated Deployable Modular Cold-Formed Steel Building

Co-Supervisor

2016 7 TAN HEAN SEONG Ongoing Co-Supervisor

2015 8 EDRIZAL Ongoing Co-Supervisor

2015 9 RAHMAT BIN ALI FIARDI Ongoing Co-Supervisor

2019 10 Bishir Kado Graduated Behaviour Of Lightweight Foam Concrete Filled Steel Tube Column Under Fire

Co-Supervisor

2015 11 Lee Yeong Huei Graduated

Performance Of Light Steel Framing With Bolted Top-Seat Flange Cleat Connection

Co-Supervisor

2015 12 Lee Yee Ling Graduated

Structural Behaviour Of Slab Panel System With Embedded Cold-Formed Steel Skeletal Frame

Co-Supervisor

16

MSc. Student Year No. Name Status Title Type Roles of

Supervision

2016 1 Chin Hap Boon Ongoing

Compression Resistance Factor of Interlocking Brick Column under Elevated Temperatures

Research Main Supervisor

2016 2 Gan Hong Wei Graduated

Economic And Structural Performance Of Cruciform Column Section With End-Plate Connection.


2017 3 Tenku

Firdaus bin Tuan Lah

Graduated

Stress Analysis Of Solid Material Diverter Subject To Impact Collision With Respect To Angle Variation


2013 4

Joma Hamed

Mohamed Omer

Graduated

Analytical And Numerical Modeling Of Flush End-Plate Connection System With Built-Up Hybrid Beam

Research Co-Supervisor

2016 5 Tee Chin Wee Graduated

Behaviour Of An Innovative Connection Used In Steel Storage Racking Systems


2014 6 Siti Hajjar binti Mohd

Salleh

Ongoing 2014 - 2017

Economic Aspect Of Interlocking Block System In Ibs (Industrilized Building System)


2017 7 Jibeh bin Gonolon Graduated

Hydro-Response Of Grid-Like Floating Structure Subjected To A Mono-Directional Flow


2012 8 Tang Xue Graduated Sensitivity Study of Blind Bolted End-

Taught Course

Main Supervisor

17

Plate Connection on Structural Hollow Section

2013 9 Lau Hui Hie Graduated

Economic Aspect of Square Hollow Section (SHS) in the Design of Multi-Storey Unbraced Steel Frame

Taught Course

Main Supervisor

2014 10 Seah Ivy Graduated

Parametric Study of Blind Bolted End-Plate Connection on Structural Square Hollow Section

Taught Course

Main Supervisor

2015 11 Nurul Ain Nabilah

binti Mamat Graduated

Parametric Study of Cross-Section Capacity of Interlocking Block Column

Taught Course

Main Supervisor

2017 12 Low Jun Xiu Graduated

Experimental Investigation on Lightweight Composite Slab System with Hollow Box Beam for Flood Resistant

Taught Course

Main Supervisor

2017 13 Law Chin Yong Graduated

Performance and Applications of Lightweight Foamed Concrete with Various Density

Taught Course

Main Supervisor

2017 14 Koo Ting Choong Graduated

Structural Behaviour of Pre-Fabricated Composite Pad Footig Foundation using Cold-Formed Steel of Lipped Channel Sections

Taught Course

Co-Supervisor

18

Final Year Project

Year No. Name Status Title Roles of Supervision

2012

1 Tan Boon Cheik Graduated

Analytical Study Of End-Plate Connection On Cruciform Column Section

Main Supervisor

2 Lim Chia Wei Graduated

Experimental Investigation Of Flush End-Plate Connection Of Cruciform Column Section

Main Supervisor

3 Philip Heng Jin We Graduated

Experimental Investigation Of Extended End-Plate Connection On Cruciform Column Section

Main Supervisor

4 Noor Aliff

bin Zainuddin

Graduated

Comparison Of Multi-Storey Steel Frames Analysis Using Wind Moment Method And Stiffness Method

Main Supervisor

2013

5 Chan Chyun Sheng

Graduated

Analytical Study of Blind Bolted End-Plate Connection on Structural Hollow Section using the Component Method

Main Supervisor

6 Chee Wing Sam Graduated

Experimental Investigation of Blind Bolted Extended End-Plate Connection on Square Hollow Section

Main Supervisor

7 Gan Bee Huay Graduated

Finite Element Analysis of Blind Bolted Extended End-Plate Connection to Square Hollow Section using ANSYS

Main Supervisor

8 Sia Pik Tung Graduated

Experimental Investigation of Blind Bolted Flush End-Plate Connection on Structural Hollow Section

Main Supervisor

9 Chong Shin Yee Graduated

Finite Element Analysis of Blind Bolted Flush End-Plate Connection on Square Hollow Section using ANSYS

Main Supervisor

2014

10 Wong Lit Choong Graduated

Experimental Investigation of Short Interlocking Brick Column using Mortar Filler and Different Reinforcement Bar Size

Main Supervisor

11 Loh Tat Eu Graduated Experimental Investigation on Short Interlocking Block Column with Concrete as Filler

Main Supervisor

19

12 Leong June Kwok Graduated

Experimental Investigation on Short Interlocking Block Column using Cement Mortar as Filler Material

Main Supervisor

13 Choi Wee Lim Graduated

Experimental Investigation On Short Interlocking Block Column With Cementitious Grout As Filler

Main Supervisor

2015

14 Lim Jin Sheng Graduated

Compression Capacity of Double Channel Cold-Formed Steel Column Section

Main Supervisor

15 Alvin Lim Wei Hoong Graduated

Structural Behavior of End-Plate Connections to Cruciform Column Section under Monotonic Loading

Main Supervisor

16 Law Chin Yong Graduated

Experimental Investigation on End-Plate Connection with Build-Up Beam Section

Main Supervisor

17 Tan Wee Jet Graduated

Economic Aspects of Cruciform Column used in the Design of Multi-Storey Unbraced Steel Frame

Co-Supervisor

2016

18 Tang Siow Ting Graduated

Structural Behavior of Lightweight Modular Wall Panel with Various Stud Thickness

Main Supervisor

19 Raymond Ling Toh

Siung Graduated

Structural Behavior of Lightweight Modular Wall Panel with Various Wall Thickness

Main Supervisor

2017

20 Nurizaty binti Zuhan Graduated

Section Properties of Cold-Formed Steel Section with Various Thickness

Main Supervisor

21 Lim Teck Thong Graduated

Structural Behaviour of Lightweight Modular Wall Panel under Combined Gravity and Lateral Loading

Main Supervisor

22 Nur Adilah binti Mohd

Idrus Graduated

Strucrtural Behaviour of Prefabricated Pad Footing Designed using Cold-Formed Steel Lipped Channel

Co-Supervisor

23 Yew Zhi Hao Graduated

Experimental Investigation of Long Interlocking Brick Column Subjected to Eccentric Load

Co-Supervisor

2018 24 Nur Asyiqin binti Saiful

Azmi Graduated

Experimental Investigation On Compression Resistance Of Short Upright Section For Storage Racking System

Co-Supervisor

20

25 Wong Sui Hieng Graduated

Compressive Strength Of Lightweight Foamed Concrete With Various Density

Co-Supervisor

26 Nur Afiza Izzati binti

Ahmad Graduated

Experimental Investigation On Slender Upright For Storage Racking System With Different Thickness

Co-Supervisor

27 Nurdini binti Zulkepli Graduated

Experimental Investigation On Slender Upright For Storage Racking System With Different Depth of Web

Co-Supervisor

28

Farah Annisa binti

Mohd Fauzli

Graduated

Comparison Of Compression Resistance Between Channel And Lipped Channel Steel Section Of Various Section Thickness

Main Supervisor

29 Amirah

Nabihah binti Ismail

Graduated

Comparison Of Cross Section Resistance And Buckling Resistance Between C Section And Lipped C Section Of Various Section Depth

Main Supervisor

30 Ivan Vun Kai Wen Graduated

Compression Resistance Of Interlocking Brick Column Under Elevated Temperature

Main Supervisor

21

POSTGRADUATE EXAMINATION /VIVA

UTM STUDENTS/VIVA

i) Co-Chairman to the PhD Viva Panels for Hadi Sarvari ii) Co-Chairman to the PhD Viva Panels for Hamed Ganjbakhsh iii) Co-Chairman to the PhD Viva Panels for Yip Chun Chieh iv) Co-Chairman to the PhD Viva Panels for Seyed Esmaeil Mohammadyan

Yasouj v) Co-Chairman to the PhD Viva Panels for Goh Lyn Dee vi) Co-Chairman to the PhD Viva Panels for Behrouz Gordan vii) Co-Chairman to the PhD Viva Panels for Elnaz Talebi viii) Co-Chairman to the PhD Viva Panels for Saleh Omar Ahmed Bamaga ix) Co-Chairman to the PhD Viva Panels for Talal M H F Alhajri

PUBLICATIONS AND PAPER PRESENTED

THESIS 1. Shek Poi Ngian, Structural Behaviour of Built-Up Steel Sections Using Partial Strength

Connection. Ph.D. Thesis, Universiti Teknologi Malaysia, Malaysia (2009)

EDITED BOOK 1. Structural Behaviour of Innovative Constructional Steel, Edited by Shek Poi Ngian and

Shahrin Mohammad, 2016, Penerbit UTM Press

BOOK CHAPTER 1. Low Jun Xiu, Shek Poi Ngian, Mahmood Md Tahir, Experimental Investigation On

Lightweight Composite Slab For Floating Structures. Improving Flood Management, Prediction And Monitoring: Case Studies In Asia. Emerald Publishing Limited, 2018, volume 20, Pages 73-78.

2. Tan Wee Jet, Mahmood Md Tahir, Shek Poi Ngian, Ali Keyvanfar, Economic Aspects of Cruciform Column Used in the Design of unbraced Multi-Storey Steel Frame, Chapter 5, Edited by Ali Keyvanfar, Mahmood Md Tahir and Arezou Shafaghat, Lambert Academic Publishing, 2016, Pages 84-107.

3. Alvin Lim Wei Hoong, Shek Poi Ngian, Lee Yee Yong, Sariffuddin Saad, Structural Behavior of End-Plate Connections to Cruciform Column Section under Monotonic Loading, Chapter 1, Edited by Shahrin Mohammad and Shek Poi Ngian, Penerbit UTM, 2016, Pages 1-14.

4. Law Chin Yong, Shek Poi Ngian, Lee Yee Yong, Ramli Abdullah, Experimental Investigation on End-Plate Connection with Built-up Beam Section, Chapter 2, Edited by Shahrin Mohammad and Shek Poi Ngian, Penerbit UTM, 2016, Pages 15-28.

22

JOURNAL ISI Journal : 1. Mahmood Md. Tahir, Hossein Mohammadhosseini, Shek Poi Ngian, Mahmud Kori

Effendi (2018) I-beam to square hollow column blind bolted moment connection: Experimental and numerical study. Journal of Constructional Steel Research 148 (2018) 383–398. (IF 2.509)

2. Joma HM Omer, Ahmad BH Kueh and Poi-Ngian Shek (2018) Three-dimensional numerical and linearly distributed multi-parameter fitted analytical modeling of hybrid beam–column with partially welded flush end-plate connection. Advances In Structural Engineering. Volume 21, pp 1777-1791. DOI: 10.1177/1369433218754698 (IF 0.968)

3. Yeong Huei Lee, Poi Ngian Shek, Shahrin Mohammad (2017) Structural performance of reinforced interlocking blocks column. Construction and Building Materials 07/2017; 142:469-481., DOI:10.1016/j.conbuildmat.2017.03.110 (IF: 2.421)

4. A. Saggaff, M.M. Tahir, A. Sulaiman, S.P. Ngian, J. Mirza (2015) Standardization of composite connections for trapezoid web profiled steel sections. Structural Engineering & Mechanics 08/2015; 55(4):765-784. DOI:10.12989/sem.2015.55.4.765 (IF 0.927)

5. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang (2015) Wind-moment design of semi-rigid un-braced steel frames using cruciform column (CCUB) section. International journal of steel structures 03/2015; 15(1-1):115-124. DOI:10.1007/s13296-015-3008-2 (IF 0.471)

6. CZ Kam, ABH Kueh, KB Low, XY Wang, PN Shek (2014) “Uniaxial compressive stability of laminated composite plate with localised interfacial degeneration” Materials Research Innovations 18 (S6), S6-109-S6-116 (IF 0.473)

7. HH Lau, PN Shek, BH Ahmad Kueh, MT Mahmood (2014) “Economic aspect of square hollow section in the design of multi-storey unbraced steel frame” Materials Research Innovations 18 (S6), S6-164-S6-168 (IF 0.473)

8. Yeong-Huei Lee, Cher-Siang Tan, Shahrin Mohammad, Mahmood Md Tahir, Poi-Ngian Shek (2014) “Review on Cold-Formed Steel Connections” The Scientific World Journal, Volume 2014, Ariticle ID 951216, 11 pages. (Impact factor 2013: 1.74)

9. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang (2012) “Experimental Evaluation of Flush End–Plate Connection with Built-up Hybrid Beam Section” Advances in Structural Engineering, Volume 15, No 2, pp 357 – 367. (Impact Factor 2011 : 0.463)

10. Mahmood Md Tahir, Shek Poi Ngian (2011) “Limiting the sway on multi-storey un-braced steel frames bending on weak axis with partial strength connections” Structural Engineering and Mechanics, Volume 38, Number 6, pp 825-847. (Impact factor 2011: 0.429)

11. Mahmood Md Tahir, Irwan Juki, Lee Hong Yong, Shahrin Mohammad, Shek Poi Ngian (2011) “Finite Element Analysis of Flush End-Plate Connections Connected to Column Web.” International Journal of Steel Structures (IJOSS) Vol 11, No 3, 247-258. (Impact Factor 2011: 0.362)

12. Mahmood Md Tahir, Shek Poi Ngian, Tan Cher Siang (2009) “Push-Off Tests on Pin-Connected Shear Studs with Composite Steel-Concrete Beams” Construction and Building Materials 23 (2009) 3024 – 3033 (Impact factor 2009: 0.947)

23

13. Mahmood Md Tahir, Shek Poi Ngian, Arizu Sulaiman, Tan Cher Siang (2009) “Experimental Investigation of Short Cruciform Columns Using Universal Beam Sections” Construction and Building Materials 23 (2009) 1354–1364 (Impact factor 2009: 0.947)

SCOPUS Journal : 1. E. U. Syamsuri, M. M. Tahir, B. A. Basyaruddin, A. Sulaiman, S. P. Ngian (2018)

Conceptual Design Using Industrialized Building System For Affordable Housing Construction In Indonesia. Advanced Science Letters, Volume 24, pp 4322-4325. DOI: 10.1166/ASL.2018.11598.

2. Bishir Kado, Shahrin Mohammad, Yeong Huei Lee, Poi Ngian Shek, Mariyana Aida Ab. Kadir, Fadhluhartini Muftah (2018) Review On Column Fire Resistance Design For Concrete Filled Steel Tube. Jurnal Teknologi 80:6 (2018) 169–179.

3. M. M. Lawan, P. N. Shek, M. M. Tahir (2018) Comparative Study between Linear-Interpolation and Stress-Block Methods of Composite Design Using Cold-Formed Steel Section. International Journal of Engineering & Technology, 7 (3.9) (2018) 38-41. DOI: 10.14419/IJET.V7I3.9.15270.

4. Fadhluhartini Muftah, Mohd Syahrul Hisyam Mohd Sani, Shahrin Mohammad, Shek Poi Ngian, Mahmood Md Tahir (2016) Temperature rise of cold-formed steel built-up back-to-back column under standard fire. Jurnal Teknologi 05/2016; 78(5-4)., DOI:10.11113/jt.v78.8526

5. Zaiton Haron, Nadirah Darus, Lim Ming Han, Zanariah Jahya, Mohamad Fauzi Abdul Hamid, Khairulzan Yahya, Yee Ling Lee, Poi Ngian Shek (2015) A Preliminary Study Of Occupational Noise Exposure Among Leaf Blower And Grass Cutter Workers In Public University. Jurnal Teknologi 11/2015; 77(16). DOI:10.11113/jt.v77.6412

6. T. Y. Taher, M. M. Tahir, A. Sulaiman, S. P. Ngian, A. Saggaff (2015) Steel Weight Saving Developed From Semi-Continuous Construction In Multi-Storey Braced Steel Frame Based On Euro-Code 3. Jurnal Teknologi 11/2015; 77(16). DOI:10.11113/jt.v77.6401

7. Zaiton Haron, Lim Ming Han, Nadirah Darus, Yee Ling Lee, Zanariah Jahya, Mohamad Fauzi Abdul Hamid, Khairulzan Yahya, Poi Ngian Shek (2015) A preliminary study of environmental noise in public university. Jurnal Teknologi 11/2015; 77(16). DOI:10.11113/jt.v77.6411

8. M.M. Lawan, M.M. Tahir, S.P. Ngian, A. Sulaiman (2015) Structural Performance of Cold-Formed Steel Section in Composite Structures: A Review. Jurnal Teknologi 05/2015; 74(4-4):165-175. DOI:10.11113/jt.v74.4625

9. Ker Shin Mu, Poi Ngian Shek, Arizu Sulaiman, Boon Cheik Tan (2015) Parametric Study of Compound Cold-Formed Steel Sections as Flexural Members. Jurnal Teknologi 05/2015; 74(4-4):61-66. DOI:10.11113/jt.v74.4610

10. Boon Cheik Tan, Poi Ngian Shek, Mahmood Md Tahir, Ker Shin Mu (2015) Analytical Study of End-Plate Connection on Cruciform Column Section. Jurnal Teknologi 05/2015; 74(4). DOI:10.11113/jt.v74.4602

11. Cher-Siang Tan, Yeong-Huei Lee, Yee-Ling Lee, Shahrin Mohammad, Arizu Sulaiman, Mahmood Md Tahir, Poi-Ngian Shek (2013) “Numerical Simulation of Cold-Formed Steel Top-Seat Flange Cleat Connection” Jurnal Teknologi, Volumn 61 (3), 63-71

24

12. Chee-Zhou Kam, Ahmad Beng-Hong Kueh, Poi-Ngian Shek, Cher-Siang Tan, Mahmood Md Tahir (2012) “Flexural Performance of Laminated Composite Plates with Diagonally Perturbed Localized Delamination” Advance Science Letters, Volume 14, 455 – 457. (Impact factor 2010: 1.253)

13. Poi-Ngian Shek, Mahmood Md Tahir, Cher-Siang Tan, Ahmad Beng-Hong Kueh, Shahrin Mohammad (2012) “Experimental Investigation on Locally Produced Cold-Formed Steel Sections for Roof Truss System” Advance Science Letters, Volume 13, 620 – 623. (Impact factor 2010: 1.253)

14. Cher-Siang Tan, Mahmood Md Tahir, Poi-Ngian Shek, Shahrin Mohammad, Ahmad Beng-Hong Kueh (2012) “Structural Behaviour of Combined Flange-Cleat and Gusset Plate Connection for Cold-Formed Steel Double Channel Sections” Advance Science Letters, Volume 14, 517 – 520. (Impact factor 2010: 1.253)

15. Mahmood Md Tahir, Shek Poi Ngian, Tan Cher Siang (2006) “Performance of Cruciform Column Using Universal Beam Sections under Axial Compression Load” Journal Teknologi, 43(B) Dis. 2005: 51 - 66

PROCEEDINGS/CONFERENCE 1. Bishir Kado, Shahrin Mohammad, Yeong Huei Lee, Poi Ngian Shek, Mariyana Aida Ab

Kadir (2018) Temperature Analysis of Steel Hollow Column Exposed to Standard Fire. Journal of Structural Technology, Volume 3, Issue 1.

2. Khadavi; Tahir, MM; Ngian, SP; Sulaiman, A; Bakri, A (2018) Economic Aspects of Cold Formed Steel Section Designed as Composite Beam. Advanced Science Letters, Volume 24, Issue 6, pp 4318-4321. DOI: 10.1166/asl.2018.11597.

3. B Kado, S Mohammad, Y H Lee, P N Shek, M A A Kadir (2018) Experimental investigation on temperature distribution of foamed concrete filled steel tube column under standard fire. Iop Conference Series : Earth And Environment Science. Volume 140.

4. Musab N A Salih, Mahmood Md Tahir, S Mohammad, Y Ahmad, A Sulaiman, PN Shek, Achmad Abraham, Muhammad Firdaus, K M Aminuddin and Khadavi (2018) Experimental Study On Flexural Behavior Of Partially Encased Cold-Formed Steel Composite Beams Using Rebar As Shear Connector. 10th Asia Pacific Structural Engineering And Construction Conference (APSEC 2018). 13 – 15 November 2018, Langkawi, Malaysia.

5. A K Mariyana, M Najmi Mastor, M S Abdul Rahman, Z Nurizaty, P N Shek, and M Z Ramli (2018) Utilization Of Rubberized Concrete Columns To Enhance Damping Ratio Subjected To Seismic Loading. Regional Conference In Civil Engineering (RCCE) 2018. 5 – 6 September 2018, Royal Ambarrukmo Hotel, Yogyakarta, Indonesia.

6. Nur Adilah Mohd Idrus, Mahmood Md Tahir, Shek Poi Ngian (2017) Structural Behavior Of Prefabricated Pad Footing System Designed Using Cold-Formed Steel Lipped Channel Section. 2nd Proceeding Of Civil Engineering: Volume 1 - Structure And Materials.

7. Nurizaty Zuhan, Shek Poi Ngian (2017) Section Properties Calculation By Matlab Software Of Lipped C Section. 2nd Proceeding Of Civil Engineering: Volume 1 - Structure And Materials.

25

8. Yew Zhi Hao, Mahmood Md. Tahir, Shek Poi Ngian (2017) Experimental Investigation Of Long Interlocking Brick Column Subjected To Eccentric Load. 2nd Proceeding Of Civil Engineering: Volume 1 - Structure And Materials.

9. Lim Teck Thong, Shek Poi Ngian (2017) Structural Behavior Of Light Weigh Steel Frame Under Combined Gravity And Lateral Loadings. 2nd Proceeding Of Civil Engineering: Volume 1 - Structure And Materials.

10. Yee Yong Lee, Yeong Huei Lee, Shahrin Mohammad, Poi Ngian Shek, Chau Khun Ma (2017) Thermal Characteristics Of A Residential House In A New Township In Johor Bahru. Iop Conference Series: Materials Science And Engineering. Volume 271, pp 1-7.

11. Mahmood Md Tahir, Anis Saggaff, Shek Poi Ngian, Arizu Sulaiman (2017) “Economic Aspects Of Interlocking Hollow Brick System Designed For Industrialized Building System” AIP Conference Proceedings, Volume 1903.

12. Yeong-Huei Lee, Cher-Siang Tan, Mahmood Md Tahir, Shahrin Mohammad, Poi-Ngian Shek, Yee-Ling Lee (2014) “Influence of Angle Thickness towards Stiffness and Strength Prediction for Cold-Formed Steel Top-Seat Flange Cleat Connection” Applied Mechanics and Materials, Volume 479-480, pp 1144-1148.

13. Anis Saggaff, Mahmood Md Tahir, Poi-Ngian Shek (2013) “Flexural Behavior of Steel Reinforced Brick Beam Utilizing Interlocking Brick System” Advanced Materials Research, Volume 661, 116-119.

14. Yee Ling Lee, Cher Siang Tan, Yeong Huei Lee, Shahrin Mohammad, Mahmood M. Tahir, Poi Ngian Shek (2013) “Effective Steel Area of Fully Embedded Cold-Formed Steel Frame in Composite Slab System under Pure Bending” Applied Mechanics and Materials, Volume 284 – 287, 1300 -1304

15. Poi-Ngian Shek, Mahmood Md Tahir, Cher-Siang Tan, Arizu Sulaiman (2013) “Experimental Investigation of Retrofitted Extended End-Plate Connections” Applied Mechanics and Materials, Volume 284 – 287, 1330 – 1333

16. Yeong Huei Lee, Cher-Siang Tan, Yee Ling Lee, Mahmood M. Tahir, Shahrin Mohammad, Poi Ngian Shek (2013) “Numerical Modelling of Stiffness and Strength Behaviour of Top-seat Flange-cleat Connection for Cold-formed Double Channel Section” Applied Mechanics and Materials, Volume 284 – 287, 1426 – 1430

17. Shahrin Mohammad, Mahmood Md Tahir, Cher-Siang Tan, Poi-Ngian Shek (2012) “Experimental Investigation on Wide-Span Cold-Formed Steel Roof Truss System” Applied Mechanics and Materials, Volume 166 - 169, 1304 - 1307.

18. Anis Saggaff, Mahmood Md Tahir, Norwati Bte Jamaluddin, Poi-Ngian Shek, Cher-Siang Tan (2012) “Experimental Test on Composite Beam with Various Slab Systems” Applied Mechanics and Materials, Volume 166 - 169, 33 - 36.

19. Roya Kohamdel, Behzad Abdi, Poi-Ngian Shek, Mahmood Md Tahir, Ahmad Beng-Hong Kueh (2012) “Optimization of Cold-Formed Channel Sections using Imperialist Competitive Algorithm” Applied Mechanics and Materials, Volume 166 - 169, 493 - 496.

20. Shek Poi Ngian, Mahmood Md Tahir, Tan Cher Siang, Ahmad Kueh Beng Hong (2011) “Experimental Investigation of End-Plate Connection with Cruciform Column Section” Advanced Materials Research 250-253, pp. 3730-3733.

21. Mahmood Md Tahir, Anis Saggaff, Arizu Sulaiman, Shek Poi Ngian, Tan Cher Siang, Ahmad Kueh Beng Hong (2011) “Behaviour of Composite Beam with Trapezoid Web

26

Profiled Steel Section in Sub-Assemblage Frame” Advanced Materials Research 250-253, pp. 1271-1274.

22. Tan Cher Siang, Mahmood Md Tahir, Shek Poi Ngian, Ahmad Kueh Beng Hong (2011) “Experimental Investigation on Slip-in Connection for Cold-formed Steel Double Channel Sections” Advanced Materials Research 250-253, pp. 1038-1041.

23. A.B.H. Kueh, W.W. Seh, P.N. Shek, C.S. Tan, M.M. Tahir (2011) “Maximum Local Thermal Effects Carpet Plot for Symmetric Laminated Composite Plates” Advanced Materials Research 250-253, pp. 3748-3751.

24. Fadhluhartini binti Muftah, Mohd Syahrul Hisyam bin Mohd Sani, Shahrin bin Mohammad, Mahmood Md Tahir, Shek Poi Ngian (2016) “Temperature Development Of Cold Formed Steel Column Channel Section Under Standard Fire” International Conference On Advanced Science, Engineering And Technology (ICASET)

25. Shek Poi Ngian, Lee Yeong Huei (2015) “Capacity Of Interlocking Stub Column With Cement Mortar Infill Under Axial Compression Load” 9th Asia Pacific Structural Engineering And Construction Conference & 8th Asean Civil Engineering Conference (APSEC-ACEC 2015)

26. Woon Chin Peow, Shek Poi Ngian, Mahmood Md Tahir, Ahmad Kueh Beng Hong (2015) “Compressive Strength Of Ground Waste Seashells In Cement Mortars For Masonry And Plastering” Applied Mechanics And Materials

27. Mohd Syahrul Hisyam bin Mohd Sani, Hau Tam Ping, Tan Cher Siang, Lee Yeong Huei, Shek Poi Ngian, Arizu Sulaiman (2015) “Force And Deformation Behaviour Of Roof Truss System With Cold-Formed Steel Channel Section” 9th Asia Pacific Structural Engineering And Construction Conference & 8th Asean Civil Engineering Conference

28. Tan Boon Kai, Shek Poi Ngian, Tan Cher Siang, Ahmad Kueh Beng Hong (2014) “Monotonic Behaviour Of Beam-To-Column Connections With Double Channel Cold-Formed Steel Sections” National Seminar On Civil Engineering Research SEPKA 2014

29. Woon Chin Peow, Shek Poi Ngian, Mahmood Md Tahir (2014) “Engineering Properties Of Bio-Inspired Cement Mortar Containing Seashell Powder” National Seminar On Civil Engineering Research SEPKA2014

30. Seah Ivy, Shek Poi Ngian (2014) “Parametric Study of Blind Bolted End-Plate Connection On Structural Square Hollow Section” 2014 Structural And Civil Engineering Workshop (SCEW 2014)

31. Tan Boon Kai, Shek Poi Ngian, Tan Cher Siang, Ahmad Kueh Beng Hong (2014) “Finite Element Analysis Of Top-Seat Beam-To-Column Connections With Double Channel Cold-Formed Steel Sections” The 6th International Conference Of Asian Concrete Federation

32. Boon-Cheik Tan, Poi-Ngian Shek, Mahmood Md Tahir, Ker-Shin Mu (2013) “Analytical Study of End-Plate Connection on Cruciform Column Section” The 9th International Conference On Geotechnical And Transportation Engineering And The 1st International Conference On Construction And Building Engineering, 2013 (GEOCON 2013)

33. Ker-Shin Mu, Poi-Ngian Shek, Arizu Sulaiman, Boon-Cheik Tan (2013) “Parametric Study of Compound Cold-Formed Steel Sections as Flexural Members” The 9th International Conference On Geotechnical And Transportation Engineering And The 1st International Conference On Construction And Building Engineering, 2013 (GEOCON 2013)

27

34. Roya Kohandel Gargari, Mahmood Md Tahir, Poi-Ngian Shek (2012) “Finite Element Models for Blind-Bolted End-Plate Connection on Structural Hollow Section” 8th Asia Pacific Structural Engineering and Construction Conference (APSEC 2012)

35. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang (2012) “Experimental and Theoretical Analysis of Retrofitted Extended End-Plate Connections” 8th Asia Pacific Structural Engineering and Construction Conference (APSEC 2012)

36. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang (2011) “Experimental Investigation on Sub-Assemblage Frame with Cruciform Column Section.” Full paper accepted for The 6th International Symposium on Steel Structures (ISSS 2011)

37. Shek Poi Ngian, Mahmood Md Tahir, Tan Cher Siang, Arizu Sulaiman (2011) “Experimental Investigation on Full-Scale Sub-Assemblage Frame” 7th International Conference on Steel and Aluminium Structures 2011 (ICSAS11)

38. Tan Cher Siang, Mahmood Md Tahir, Shek Poi Ngian (2011) “Experimental Investigation on Bolted Angle Connections for Cold-Formed Steel Sections” 7th International Conference on Steel and Aluminium Structures 2011 (ICSAS11)

39. Mahmood Md Tahir, Irwan Juki, Tan Cher Siang, Shek Poi Ngian (2011) “Experimental Investigation of Flush End-Plate Connection Connected to Column Web” 7th International Conference on Steel and Aluminium Structures 2011 (ICSAS11)

40. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Wong Kah Leong (2008) "Comparison of Partial Strength Connection between Extended and Flush End-Plate Connections Using Built-Up Beam Sections" International Graduate Conference on Engineering and Science 2008 (IGCES 2008)

41. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Wong Kah Leong (2008) "Experimental Behaviour of Partial Strength Steel Beam-To-Column Connection Using Built-Up Beam Sections" 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management (EnCon 08)

42. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Wong Kah Leong (2007) "The Economic Comparison Of Multi-Storey Un-braced Steel Frames Design In Semi-Continuous Construction" National Seminar on Civil Engineering Research (SEPKA 2007)

43. Wong Kah Leong, Airil Yasreen Mohd Yassin, Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian (2007) "Application Of Cold-Formed Steel Sections For Permanent Formwork Of Pad Footing Foundation" National Metallurgical Conference 2007

44. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Wong Kah Leong (2007) "The Use Of Cruciform Column Sections For Multi-Storey Steel Frames" National Metallurgical Conference 2007

45. Mahmood Md Tahir, Anis Saggaff, Arizu Sulaiman, Shek Poi Ngian (2007) "Standardisation Of Partial Strength Composite Connections Using Pre-Fabricated Steel Sections" EACEF

46. Anis Saggaff, Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Wong Kah Leong. (2007) "Buckling Analysis Of Cruciform Column Using Universal Beam Section" EACEF

47. Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Shek Poi Ngian (2007) "Economic Aspects of Partial Strength Connection in the Design of Braced Steel Frame Using Trapezoidal Web Profiled Steel Sections" Persidangan Kebangsaan AWAM 07

28

48. Shek Poi Ngian, Mahmood Md Tahir, Tan Cher Siang (2007) "Ultimate Axial Load of Cruciform Column Using Universal Beam Section" Persidangan Kebangsaan AWAM 07

49. Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian (2006) "Typical Experimental Tests on Cold-Formed Steel Structures" 6th Asia Pacific Structural Engineering and Construction Conference 2006

50. Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian, Anis Saggaff (2006) "Economic Aspect of Un-braced Frame Design for Multi Storey Structure Using Cruciform Column" 6th Asia Pacific Structural Engineering and Construction Conference 2006

51. Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian, Sariffudin Saad (2006) "Application of Wind Moment Method on the Design of Multi-storey Un-braced Steel Frames with Partial and Full Strength Connections" 6th Asia Pacific Structural Engineering and Construction Conference 2006

52. Mahmood Md Tahir, Shek Poi Ngian, Tan Cher Siang, Anis Saggaff (2006) "Development of Sections Properties Tables for Cruciform Column Using Universal Beam Sections" 1st Regional Postgraduate Conference on Engineering and Science 2006

53. Mahmood Md Tahir, Anis Saggaff, Shek Poi Ngian, Shahrin Mohamed (2006) "Full scale testing on composite connection using Trapezoid Web Profiled steel section" 19th Australasian Conference on the Mechanics of Structures and Materials

54. Mahmood Md Tahir, Shek Poi Ngian, Tan Cher Siang (2006) "The Economic Aspect Of Multi-Storey Un-braced Steel Frames Design In Continuous Construction Using S275 And S355" International Seminar on Civil and Infrastructure Engineering 2006 (ISCIE '06)

SEMINARS/WORKSHOPS 1. Mahmood Md Tahir, Shek Poi Ngian, Arizu Sulaiman, “short course CREaTE JKR on

Advanced Structural Steel Design to Eurocode 3” short course CREaTE JKR, 24 – 26 September 2018.

2. Shahrin Mohamed, Shek Poi Ngian, Arizu Sulaiman, “Basic Structural Steel Design to Eurocode 3” short course CREaTE JKR, 1 – 3 August 2018.

3. Arizu Sulaiman and Shek Poi Ngian, “Short Course on Steel Design to EC3” Lecture given at Forensic Engineering Centre (FEC), 28-29 July, 2016, FKA, UTM.

4. Shek Poi Ngian, Basic Steelwork Design to Eurocode 3, Seminar for PGSS FKA, 22 August 2015, D02 Smart Classroom, FKA, UTM.

INVITED/GUEST SPEAKER 1. Shek Poi Ngian, Innovative Construction Using Cruciform Column Universal Beam

(CCUB) Section, public lectures given at Universitas Sriwijaya, 16 – 18 October 2018. 2. Shek Poi Ngian, Ethics in Engineering Profession, lecture given for program PPMH, 20

May 2015, M47-215, FKA, UTM. 3. Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian, “An Innovative Prefabricated Pad

Footing Foundation Constructed using Cold-Formed Steel Sections”, UTM Technology Transfer Showcase (TTS) 2015

29

CONSULTANCY 1. Analysis and Testing on Dexion Asia Sdn. Bhd. Product. Dexion Asia Sdn Bhd. 1/1/2018

– 31/12/2018. 2. Fire Resistance Test For 3 Timber Sample For 1 Hour. Universiti Teknologi Mara Shah

Alam. 1/1/2018 – 6/2/2018. 3. Mechanical Testing on Steel Storage Racking System DEX 808 to AS4084. Dexion Asia

Sdn Bhd. 1/1/2017 – 31/8/2017. 4. Fire Resistance Test on Concrete Column. Universiti Teknologi Mara (UiTM) Shah

Alam. 1/11/2017 – 20/12/2017. 5. Fire Resistance Test on FireProofing Material. SIKA Kimia Sdn Bhd. 1/2/2017 –

31/7/2017. 6. 2 Hours Fire Resistance Test for Cementitious Vermiculite Fireproof Coating. Ap

Firespray Plt. 11/8/2017 – 21/11/2017. 7. Structural Test on Racking Component. Approved Forensic International. 1/3/2016 –

11/3/2016. 8. Fire Resistance Test on Steel Column. SIKA Kimia Sdn Bhd. 1/4/2016 – 30/6/2016. 9. Fire Resistance Test on Composite Column. Universiti Teknologi Mara Shah Alam

(UiTM). 1/1/2016 – 30/12/2016. 10. Analysis and Testing on Mechanical Properties for Schaefer Systems International

Product. Scahefer Systems International Sdn Bhd. 1/1/2015 – 31/12/2015. 11. Fire Testing on FRP Column. Universiti Teknologi Mara Shah Alam. 1/1/2015 –

9/3/2015. 12. Fire Testing on Cold-Formed Steel Column. Universiti Teknologi Malaysia (VOT 4F258).

1/1/2015 – 11/6/2015. 13. Analysis and Testing on Mechanical Properties for Schaefer Systems International

Product. Scahefer Systems International Sdn Bhd. 1/1/2014 – 5/8/2014. 14. Fire Testing on Concrete and Composite Column. Universiti Teknologi Mara Shah Alam

(UiTM). 1/6/2014 – 31/8/2014. 15. Analysis and Testing on Mechanical Properties for Schaefer Systems International

Product. Scahefer Systems International Sdn Bhd. 1/1/2013 – 31/12/2013. 16. Structural Test on Racking Component. Approved Forensic International. 1/4/2013 –

24/4/2013. 17. Full Scale Stub Column Test. Approved Forensics Sdn Bhd. 2/4/2012 – 10/4/2012. 18. Analysis and Testing on Mechanical Properties for Schaefer Systems International

Product. Scahefer Systems International Sdn Bhd. 6/2/2012 – 28/12/2012. 19. Analysis and Testing on Mechanical Properties for Schaefer Systems International

Product. Scahefer Systems International Sdn Bhd. 20/4/2011 – 2/12/2011. 20. Analysis and Testing on Mechanical Properties for Schaefer Systems International

Product. Scahefer Systems International Sdn Bhd. 1/2/2010 – 10/12/2010. 21. Shear and Tensile Test for Bolts. T & E Project Consultancy Sdn. Bhd. 1/9/10 –

25/11/10.

30

MOU/MOA (Coordinator) 1. MEMORANDUM PERSEFAHAMAN (MoU) DI ANTARA UTM DAN CSDC ACADEMY

SDN BHD. CSDC ACADEMY SDN BHD. 22/8/17 (3 Years) 2. MEMORANDUM OF UNDERSTANDING (MoU) between IPM PROFESSIONAL

SERVICES SDN BHD and UNIVERSITI TEKNOLOGI MALAYSIA (UTM). IPM PROFESSIONAL SERVICES SDN BHD. 21/10/17 (3 Years)

curriculum vitae · dubai. ii) august 2018 technical evaluator for tender “solar – house...

Documents