curriculum vitae - aerg.ump.edu.my€¦ · university learning and teaching (incult’08),...

1

Curriculum Vitae

1. PERSONAL INFORMATION

Name : Engr. Dr. Kumaran a/l Kadirgama

I/C Number : 810304-04-5123

Nationality : Malaysia

Date of Birth : 04 March 1981

Sex : Male

Race : India

Religion : Hindu

Marital Status : Single

Spoken Language: Bahasa Malaysia, English and Tamil

Present Position: Senior Lecturer,

Faculty of Engineering,

Universiti Malaysia Pahang (UMP).

Work Address : Faculty of Mechanical Engineering,

Universiti Malaysia Pahang,

Karung Berkunci 12, 25000 Kuantan,

Pahang Darul Makmur.

Email : [email protected], [email protected]

Home Address : No.80, JLN 32, Taman Tas, 25150 Kuantan,Pahang

Home Tel. No.: 09-5393597

Hand Phone : 012 – 6325043

Scopus H-index 11

(12761486500) :

Google Scholar

H-index : 16

2. EDUCATION

Street-Fighting Math (Mathematic course) - Massachusetts Institute of Technology

(MiT) (2014)

PhD (Mechanical Engineering) – University Tenaga Nasional (2011)

M.Eng (Mechanical Engineering) – University Tenaga Nasional (2006)

B.Eng. (Hons-Mechanical Engineering) – University Tenaga Nasional (2003)

Sek. Men. Seri Mahkota, Kuantan. (1994-98)

Sek. Keb.Batu Lapan, Kuantan. (1988-93)

3. CAREER HISTORY

Dec 2015 – Current : Professor Madya at University Malaysia Pahang (UMP)

Mei 2011 – Nov 2015 : Senior Lecturer at University Malaysia Pahang (UMP)

Jun 2015 – Jun 2017 : Appoint As Associate Researcher in Nelson Mandela

Metropolitan University (NMMU), South Africa

Mei 2010 – 2014 : Head of Biomechanical Programme, UMP

mailto:[email protected]

2

Jan 2008 – Mei 2011 : Lecturer at University Malaysia Pahang (UMP)

Feb 2005 – Dec. 2007 : Research .Asst, Universiti Tenaga Nasional

Feb 2004 – Jan. 2005 : Head of Department /Mechanical Engineer (Mould

Maintenance) at Maruwa Sdn.Bhd

Feb 2003 – Nov.2003 : Mechanical Engineer at Pahang Cement Sdn.Bhd (YTL)

4. Professional Associations

BEM – Graduate member (50427R)

IEM – Graduate member

IMECHE – Member (80203255), CEng (UK)

MQA Auditor (2012 – current)

Member IAENG ( International Association of Engineers) -64580

ASME – Graduate member (100023402)

KPT BUDI commitee (2011 – current)

Malaysian Automotive Institute (MAI)

Malaysian Society of Engineering and Technology (mSET No. 00241)

Member, International Association for Computational Mechanics (IACM)

Member, Malaysian Association of Computational Mechanic. (MACM)

Member, UMP Automotive Excellent Center

Member, IAENG Society of Artificial Intelligence (64580)

Member, ResearchGate Scientific Network. (64580)

Member, IAENG Society of Industrial Engineering (64580)

Member, IAENG Society of Mechanical Engineering (64580)

Member, American Communication Association, (ACA) (64580)

Member, IAENG Society of Operations Research (64580)

Member, IAENG Society of Scientific Computing (64580)

Judge/Panel Evaluator for Fac. of Mechanical Engineering Solidwork Competition,

Mar 2009

Standing Committee, mSET Admission, Accreditation, Examination & Certification

(mSET EAEC), 2009.

5. Goverment\Non-goverment Organazation

Member of Mariaman Temple

Member of Kuantan Indian Association (KIA)

6. Journal Editorial Board

International Journal of Automotive & Mechanical Engineering (IJAME), (Founder),

Malaysia.

International Journal of Vehicle Structure: Design, Analysis & Optimisation

(IJVSDAO), India.

Engineering Letters, International Association of Engineers (IAENG).

News in Engineering

3

7. Journal & Paper Reviewer

Energy, Elsevier

Thermal Science, Elsevier

Applied Thermal science, Elsevier

Advanced Manufacturing Technology

International Journal of Engineering Education, (IJEE) Ireland.

International Journal of Automotive and Mechanical Engineering (IJAME) Malaysia

International Journal of Design and manufacturing ,Emerald

Jordan Journal of Mechanical & Industrial Engineering (JJMIE) Jordan

International Journal of Engineering Education, (IJEE) Ireland.

African Journal of Food Science, AJFS. Academic Journals, Africa.

International Journal of Vehicle Structure: Design, Analysis & Optimisation

(IJVSDAO), Mechaero.

Open Industrial Journal

International Journal of Recent Trends in Engineering (IJRTE), Academy Publishers,

Finland

Panel of Journal Reviewer for Mechanical Engineering Faculty, UMP.

Malaysian Technical Universities Conference and Exhibition on Engineering and

Technology (MUCEET 2009), 20~22Jun, Ms Garden, Kuantan, Pahang, Malaysia.

Advanced Material Processing Technology (AMPT 08)International Conference on

University Learning and Teaching (InCULT’08), 20~21Oct, UiTM Shah Alam,

Malaysia.

Malaysian Technical Universities Conference and Exhibition on Engineering and

Technology (MUCEET 2009), 20~22Jun, Ms Garden, Kuantan, Pahang, Malaysia.

National Conference of Post Graduate Research (NCON-PGR 2009), 1st Oct 2009,

UMP.

Asia Pacific Defence & Security Technology Conference (DSTC 2009), Universiti

Putra Malaysia, 6~7 Oct, Kuala Lumpur.

International Conference on Software Engineering and Computer Systems

(ICSECS’09), 19~21Oct, Swiss Garden Resort & Spa, Kuantan, Pahang, Malaysia.

International Conference on Advances in Recent Technologies in Communication and

Computing, (ARTCom’09), 27~28 Oct, IEEE-Computational Intelligence Society,

India

International Conference on Advance Material Processing Technology (AMPT’09),

26~29 Oct, Legend Hotel, Kuala Lumpur, Malaysia.

UMP/USM Post Graduate Research Colloquium/Conference (PGRC 2009), 15~17

December 2009, Kuantan

The World Congress on Engineering (WCE 2010), 30 June - 2 July, London, U.K.

The International Multi-Conference of Engineers and Computer Scientists (IMECS

2010), 17-19 March, Hong Kong.

The World Congress on Engineering and Computer Science (WCECS2010), 20-22

Oct, San Francisco, USA.

The 4th World Engineering Congress 2010 (WEC2010), Conference on Aerospace

and Mechanical Engineering, 2~5 August, Kuching, Serawak, Malaysia.

4

Session Chairperson, 2nd Regional Engineering Conference on Sustainable

Engineering Infrastructures Development & Management (ENCON’08), 18-19

December 2008, Crowne Plaza Riverside Hotel, Kuching, Sarawak, Malaysia, 2008.

Session Chairperson, Malaysian Technical Universities Conference and Exhibition on

Engineering and Technology (MUCEET’09), 20~22Jun, Ms Garden, Kuantan,

Pahang, Malaysia, 2009.

Chairman – Organising Committee and Session Chairperson, National Conference of

Post Graduate Research (NCON-PGR 2009), 1st Oct 2009, UMP.

Technical Committee, UMP/USM Post Graduate Research Colloquium/Conference

(PGRC 2009), Dec’09, UMP.

Technical Committee, 4th World Engineering Congress 2010 (WEC2010),

Conference on Aerospace and Mechanical Engineering, 2~5 August, Kuching,

Serawak, Malaysia.

Technical comitee for ICMER 2013

Technical comitee for ICMER 2015

8. Administrative Committees Involved

Member, 2015 FKM EAC Task Force for BMM/BMA Accreditation, 2015

Head of biomechanical programme, 2010 to 2014

Member, 2013 FKM EAC Task Force for BMM/BMA Accreditation, 2013

Member, 2010 FKM EAC Task Force for BMM/BMA Accreditation, 2010-2011

Member, 2009 FKM EAC Task Force for BMM Accreditation, 2009 - 2010

Leader, FKM APEX15 Committee, (2008 to date)

Member, UMP Cendikia Bitara Award Main Committee, 2009

Leader, FKM Thermodynamics Laboratory, (2009 to date)

Technical Committee, Malaysian Technical Universities Conference and Exhibition

Member, UMP Research Committee, since 2009.

Advisor, ASME Student Club, (2009 to date)

Member, Committee for MoU Setup between UMP and Hicom Automotive

Manufacturers Sdn Bhd.

Member and Founder UMP International Journal of Automotive and Mechanical

Engineering (IJAME) Setup Committee (2009)

Member, UMP Automotive Excellent Center Auto News Bulletin Editorial Board

(2009 to date)

Member, FKM ISO9001 Committee, (2008 to date)

Member, 2009 FKM Industrial Advisory Panel Committee Meeting,

(Dec’08~Mar’09)

Member, 2009 FKM EAC Task Force for BMM Accreditation, Nov’08~Jul’09.

Member, FKM EAC Task Force for OBE Transformations. (Sept’08 to date)

Member, New Program, Biomechanics Feasible Analysis Committee, (Dec’08 ~

Mar’09)

Member, Setup Comm. UMP-DRB Hicom Automotive Institute, 2008 to 2009.

5

Member, Faculty Research and Postgraduate Committee, 2008 to date.

MeMember, Faculty Technical Committee (JKTF), Jan’08 to date.

9. Working Paper (Management)

Kertas Kerja Fakulti: Penganjuran UMP Research and Innovation Exhibition

(UMPRIE 2009) untuk Fakulti Kejuruteraan Mekanikal, UMP, May 2009.

Kertas Kerja Fakulti: Perlantikan Panel Penasihat Industri (Industry Advisory Panel)

untuk Fakulti Kejuruteraan Mekanikal, UMP, May 2009.

Kertas Kerja Fakulti: Penubuhan Empat Research Focus Group untuk Fakulti

Kejuruteraan Mekanikal, UMP, May 2009.

Kertas Kerja Senat/Fakulti: Perlantikan Panel Penasihat Luar (External Examiner)

untuk Fakulti Kejuruteraan Mekanikal, UMP, Mar 2009.

Kertas Kerja Universiti/Fakulti: Self Assessment Report for Bachelor of Mechanical

Engineering accreditation application to Board of Engineer (BEM) thru Engineering

Accreditation Council (EAC), Jan 2009.

Kertas Kerja Penerbitan International Journal Automotive And Mechanical

Engineering (IJAME) Untuk Automotive Excellent Center (AEC), 2009

Kertas Kerja Penerbitan Bulletin Automotive Untuk Automotive Excellent Center

(AEC), 2009

10. List of Consultation

Consultation for UIE-Solution Sdn Bhd: Finite Element Analysis for Storage Tank

and Pressure Vessel Corrosion, RM12,900, Vot No. UIC080102,Researcher, Apr

2009.

Consultation for Huntsman Tioxide Sdn Bhd., Finite Element Study of Failure

Analysis For 20 Meter Industrial Cooler Unit, Researcher, Vot No. UIC080102.

RM19,100, Jan ~ Mar 2009.

Consultation: The Development of Fertilizer Mixer for Small Scale Mixing Process,

Researcher, RM10,000, Vot No. UIC080102.

Consultation for MMC Oil and Gas Sdn Bhd., Modal Analysis of Transport Pipe

(Mode Shape), Vot No. UIC080102.Researcher, Jan ~ Feb 2009. (Completed)

Petronas Carigali Angsi-B Crane B-7020 Structural Analysis. Researcher, Vot No.

UIC080102, Petronas Carigali Sdn. Bhd. thru RIA Solution Sdn. Bhd. Apr ~ Aug

2008. (Completed)

6

11. POSTGRADUATE STUDENT SUPERVISON

Name Level Title

Mohammad Ashikur

Rahman Khan

(Phd – Completed) An Experimental

Investigation And

Modelling Of The

Electrical Discharge

Machining Performance

On Titanium Alloys

Adnan Mohammed

Hussein

(Phd – Completed) Combined Forced And

Natural Convective Heat

Transfer From Cylinder

Embedded In Saturated

Porous Media

Haji Amiruddin Bin

Kadir

(Phd – On Going) Friction And Wear

Analysis Of Nanolubricant

On Engine

Benedict Foojs Choong

Meng

(Phd – On Going) Microalgea Reactor For

Lubrication

Hizanorhuda Zurgiba (Phd – On Going) Effect of nanofluids as

coolant in the cooling

system

Yogeswaran A/L

Muthusamy

(Master – Completed) Synthesis And

Characterizing Of Green

Machining Using Tio2

Based Nanocoolant

Lingenthiran A/L

Samylingam

(Master – Completed) Hybrid Fiber Composite

For Knee Pad

Developement

Sakinah Muhammad

Hisham

(Waiting for viva) Waste Cooking Oil As

Lubricant For Engine

Maizatul Asnida Hassan (Waiting for viva) Thermal Management of

Vehicle Radiator by

nanofluids

Arvind Kottasamy (Master-On-going) Nanolubrication For

Automotive Radiator

Mudather Bahreldeen

Hamid Nour

(Master – On-Going) Multiobjective

Evolutionary Optimization

On Performance Measures

7

Of Minimum Quantity

Lubricant In Grinding

Processes

Noor Safiqah Mohd

Sahid

(Master – On-Going) Investigation of

nanolubricant performance

characteristics for friction

reduction application

Nur Syawanie Manam (Master – On-Going) Design fabrication of

dental alloy using direct

metal laser sintering

12. List of thesis Examiner

Name Level Title

Nurhidayah Master thesis Machining of hastelloy

Haynes22

Fauzlina Master thesis Sintering of Aluminium

and tool steel

Najihah PhD thesis MQL Nano lubrication

when machining titanium

Adib Anuar Master thesis Vibration and chatter

analysis when machining

titanium alloy

13. List of Research / Project

Grant. No Title Role Status Value

GRS150307 TRIBOLOGICAL BEHAVIOUR OF WASTE COOING OIL AS BIOLUBRICANT FOR INTERNAL COMBUSTION ENGINE

LEADER ON-GOING 10,000

NPRP8-876-2-375

DIRECT METAL LASER SINTERING TECHNOLOGY FOR THE MANUFACTURE OF FULLY POROUS FUNCTIONALLY GRADED TITANIUM ALLOY FEMORAL STEMS (QATAR NATIONAL FUND)

LEADER ON-GOING 2,710,000

GRS150309 INFLUENCE OF WASTE COOKING OIL AS BIO-NANLUBRICANT ON WEAR AND FRICTION BEHAVIOUR OF ALUMINIUM AGAINST STAINLESS STEEL


RDU1403134 HYBRID NANOPARTICLES WITH ETHYLENE GLYCOL FOR CAR RADIATOR APPLICATION


RDU130129 DEVELOPMENT AND CHARACTERISTICS OF WASTE COOKING OIL AS BIO -LUBRICANT AND NANO-LUBRICANT AT HIGH TEMPERATURE (FRGS)


RDU130393 CHARACTERISTICTION OF ENGINE OIL WITH NANO PARTICLE AS AN ADDITIVES


RDU131205 WATER BASED NANO COOLANTS (MTUN GRANT)

LEADER COMPLETED 44,000

RDU130313 DEVELOPMENT OF FUEL TESTING SYSTEM ON CHASSIS DYNAMOMETER FOR COMPRESSED NATURAL GAS DIRECT INJECTION POWERED VEHICLE


RDU110373 DEVELOPMENT OF TOOL-LIFE LEADER COMPLETED 36,000

8

PERFORMANCE MODEL FOR MOLD AND DIE USING NEAR DRY MACHINING TECHNIQUE

RDU110326 SURFACE IMPREGNATION/MODIFICATION USING NANOMATERIALS FOR ENHANCED MECHANICAL PROPERTIES OF METAL SURFACES


RDU0903126 AN INVESTIGATION OF WIND POWER POTENTIAL AT KUALA PAHANG, PEKAN.


RDU090202 DESIGN AND DEVELOP BLOW MOULD USING MACHINING OPTIMIZATION PARAMETERS


RDU090374 OPTIMIZATION OF GRINDING WHEEL PARAMETERS WITH INTELLIGENT TECHNIQUES


RDU080324 STATISTICAL AND ARTIFICIAL INTELLIGENT STUDY TO DETERMINE THE EFFECT OF MILLING PARAMETERS ON CUTTING FORCE, STRESS AND SURFACE ROUGHNESS WHEN MILLING ALUMINIUM AND NICKEL SUPERALLOY


RDU080502 DEVELOPMENT OF A DESIGN EVALUATION SYSTEM SOFTWARE FOR HOME APPLIANCES REMANUFACTURING (E-SCIENCE)


RDU150338 PROGRESSIVE WEAR IN SUSTAINABLE MACHINING OF COBALT CHROMIUM ALLOY USING CUTTING INSERTS OF DIFFERENT COATING MATERIALS

MEMBER ON-GOING 33,000

RDU1403126 IMPACT BIODIESEL FUEL CHARACTERISTICS ON ULTRA-LOW EMISSION HOMOGENEOUS CHARGE COMPRESSION IGNITION ENGINE


RDU1403124 VALVE WEAR ANALYSIS WITH NANO COATING FOR COMPRESSED NATURAL GAS (CNG) ENGINE (FRGS)


RDU1403110 FUNDAMENTAL STUDY OF THERMO-PHYSICAL PROPERTIES AND FORCED CONVECTION HEAT TRANSFER RATE BIOGLYCOL BASED NANOFLUIDS COOLANT


RDU140116 MULTIAXIAL MODELLING OF LIGHTWEIGHT SANDWICH STRUCTURES BASED ON CORRUGATED-CORES FOR AEROSPACE APPLICATION (FRGS)


RDU140104 ENHANCED DRIVER SEATING COMFORT IN A SMALL SIZE CAR THROUGH DIGITAL HUMAN MODELLING(DHM)AND PRESSURE MAPPING METHOD (FRGS)


RDU140125 ENGINE VALVE SEAT WEAR STUDY ON COMPRESSED NATURAL GAS (CNG)BY USING NANO POWDER


RDU140377 DEVELOPMENT OF A SMART CUTTING TOOL FOR SUSTAINABLE MACHINING OF NICKEL BASED ALLOYS FOR THE APPLICATION TO TURBOCHARGER MANUFACTURING


RDU140502 DEVELOPMENT AN OLYMPIC SCALE OF RECURVE BOW AND ARCHERY FOR LOCAL JUNIOR ATHLETES UNDER 15 AND 17 (U-15 AND U-17)


RDU140354 DEVELOPMENT OF TITANIUM MANGANESE ALLOYS FOAMS FOR BIOMEDICAL APPLICATIONS BY METAL INJECTION MOLDING


RDU1303121 A LOW COST FORCE DYNAMOMETER FOR PRECISON MACHINING OF AUTOMOTIVE CYLINDER HEAD


RDU1303127 DEVELOPMENT OF MULTIAXIAL FATIGUE MODELLING FOR LIGHTWEIGHT AUTOMOTIVE SUSPENSION COMPONENTS (FRGS)


RDU130146 MULTIAXIAL FATIGUE MODELLING FOR SAFETY-CRITICAL LIGHTWEIGHT AUTOMOTIVE SUSPENSION COMPONENTS


RDU1303110 THREE-DIMENSIONAL (3D) MODELLING OF HUMAN AIRWAY USING FLUID STRUCTURE INTERACTION (FSI) TECHNIQUE


RDU1303107 MODELLING OF VEHICLE SEAT FOR HUMAN COMFORT OF A SMALL SIZE PASSENGER CAR (K-CAR)


9

RDU130131 FUNDAMENTAL STUDY OF JATROPHA BIODIESEL OIL ON ULTRA-LOW EMISSION HOMOGENEOUS CHARGE COMPRESSION IGNITION ENGINE COMBUSTION (FRGS)


RDU1303108 DEVELOPMENT AND ANALYSIS OF BOW AND ARROW FOR MALAYSIAN ATHLETE


RDU130134 THE EFFECT OF STEAM INJECTION ON POWER AND EMISSION OF HYBRID AIR-DIESEL ENGINE USING STEAM INJECTOR (FRGS)


RDU130391 FUNDAMENTAL STUDY OF EG BASED NANOFLUIDS FOR APPLICATION IN AUTOMOTIVE COOLING SYSTEM

MEMBER COMPLETED 32,000

RDU121408 NANO PARTICLE'S HEAT TRANSFER CHARACTERISTICS IN REFRIGERATION AND AUTOMOTIVE AIRI CONDITIONING SYSTEMS FOR REDUCTIION OFO ENERGY CONSUMPTION (RAGS)


RDU120104 POTENTIAL OF INTEGRATED CHATTER AVOIDANCE AND MINIMUM QUANTITY LUBRICATION CONDITION IN MACHINING PROCESS (FRGS)


RDU120310 NANOPARTICLE BASED COOLANTS IN GRINDING PROCESSES FOR AUTOMOTIVE INDUSTRY COOLING APPLICATIONS


RDU110702 DEVELOPMENT OF HIGH PERFORMANCE SPORTS SHOES AND KNEE PAD FOR MALAYSIAN ATHLETES (KPT)


RDU110336 DEVELOPMENT OF NEW LUBRICANT DISPERSED WITH NANOPARTICLES


RDU110110 MINIMUM QUALITY LUBICATION TECHNIQUE FOR END MILL TO ENHANCE MACHINABILITY OF ALUMINUM ALLOYS


RDU100387 CHARACTERIZATION OF HEAT TRANSFER PROCESS FOR HYDROGEN FUELED INTERNAL COMBUSTION ENGINE


RDU100380 MACHINING OF NICKEL SUPERALLOLY MATERIAL USING NANOFLUID AS COOLANT FOR LIGHT ALLOY PISTON


RDU100108 HYBRID OPTIMIZATION MODEL TO ENHANCED THE MACHINABILITY OF TITANIUM ALLOYS (FRGS)


RDU100351 MODELLING OF THERMAL COMFORT AND PRODUCTIVITY IN AUTOMATIVE INDUSTRIES


RDU100323 DEVELOPMENT OF ONLINE MACHINING CONDITION SYSTEM: AN ACOUSTIC EMISION APPROACHED


RDU0903131 INVESTIGATING OF MICROMACHINING OF SILICON USING MICRO EDM


RDU0903125 DEVELOPMENT OF REVETEC ENGINE CAM FOR INTERNAL COMBUSTION ENGINES


RDU0903100 HEAT TRANSFER AUGMENTATION WITH ALUMINIUM OXIDE NANOFLUID IN A PLAIN TUBE AND WITH INSERTS


RDU090398 ACCURACY OF STAINLESS STEEL THICK PLATES IN PERIPHERAL MACHINING


RDU090201 A NOVEL AND FLEXIBLE SOLAR CAR KIT FOR EDUCATIONAL USE


RDU090203 INVESTIGATION OF REFRIGERATOR PERFORMANCE USING EXPERIMENTAL AND SIMULATION METHOD


RDU090367 DEVELOPMENT OF MICRO-EDM WITH MICROACTUATOR FEED CONTROL SYSTEM


RDU090372 DESIGN AND DEVELOPMENT OF A LIFT SYSTEM FOR DIASABLE PEOPLE


RDU090394 EXPERIMENTAL INVESTIGATION OF MACHINING PERFORMANCE OF NEAR DRY AND POWDER MIXED DIELECTRIC (PMD) ELECTRICAL DISCHARGE MACHINING (EDM) ON TITANIUM ALLOYS


RDU090366 DEVELOPMENT OF MICROPUMP IN FUEL CELL APPLICATION USING MICRO ELECTRO-MECHANICAL SYSTEM (MEMS) MACHINING METHOD


10

14. Exhibition/Award

No. Title Award Committee Level

Who Who’s in the World for 2009 Marquis International

2000 Outstanding Intellectuals in

21st Century

American

Biographical

Institute

International

Great mind of 21st Century American

Biographical

Institute

International

Represent Malaysia as an

Ambassador in World Forum 2009

American

Biographical

Institute

International

Deputy Director General for Asia

region

International

Bibliography

Center (IBC),

Cambridge

International

Honorary Doctorate of Letter International

Bibliography

Center (IBC),

Cambridge

International

Anugerah Perkhidmatan

Cemerlang, 2008

Universiti Malaysia

Pahang

National

Anugerah Perkhidmatan

Cemerlang,2012

Universiti Malaysia

Pahang

National

Final nominee for Malaysia Young

Scientist, 2012 MOSTI National

Won Best Malaysia Team Award,

2013 Shell Eco Marathon Shell International

Bronze – Title: Design and

Development of Blow Mould using

Machining Optimization

Parameters

19th International

Invention,

Innovation,

Industrial Design &

Technology

Exhibition

(ITEX08)

International

Bronze – Title: Design and

Development of Blow Mould

Using Genetic Algorithms

Malaysian

Technology Expo

National

Bronze – Title: Little Mantis:

Short Mobility Electic Scooter

Development

Malaysian

Technology Expo

National

Gold – Title: Motorized Cutter for

Harvesting Plant

Malaysian

Technology Expo

National

Bronze – Title: Motorized Cutter

for Harvesting Plant

GENEVA International

11

Bronze – Title: CarJack Using

Internal Car Power

20th International

Invention,

Innovation,

Industrial Design &

Technology

Exhibition

(ITEX09)

International

Silver – Title: A New Machining

Mould Algorithm based on

Response Ant Colony (RACA)

20th International

Invention,

Innovation,

Industrial Design &

Technology

Exhibition

(ITEX09)

International

Silver – Title: Spring Activated

Pole (SAP)

20th International

Invention,

Innovation,

Industrial Design &

Technology

Exhibition

(ITEX09)

International

Silver – Title: Multi-Axial Fixing

Elements (MAFE) an Innovative

Product to Effectively Manage

Most Clinically Unstable Situation

of the Bone

Ministry of Higher

Education,

International

Exposition of

Research and

Development of

Institute of Higher

Learning 2009

(PECIPTA’09)

National

Bronze – Title: New Technique for

Laser-Micromachining of MEMS

Components

Ministry of Higher

Education,

International

Exposition of

Research and

Development of

Institute of Higher

Learning 2009

(PECIPTA’09)

National

Gold – Nanocoolant for

Automotive and Industry

application

ITEX12 International

Silver - Nanocoolant for

Automotive and Industry

application

SIFF12 International

Cendekia Bitara Merit Award Universiti Malaysia National

12

Journal Publication, 2009 Pahang

Cendekia Bitara Merit Award for

Research Product,2009

Universiti Malaysia

Pahang National

Cendekia Bitara Merit Award

Journal Publication,2010

Universiti Malaysia

Pahang National

Cendekia Bitara Award Journal

Publication,2010

Universiti Malaysia

Pahang National


Journal Publication, 2011

Universiti Malaysia

Pahang National


Journal Publication, 2012

Universiti Malaysia

Pahang National

Cendekia Bitara Award

Product,2012

Universiti Malaysia

Pahang National

Cendekia Bitara Award

Publication, 2013

Universiti Malaysia

Pahang National

15. Patent

Blow mould shell, MY-143846-A, 2012

Method and System for Enhancing Moulding Machining Performance. PI20093258,

2009

Car Jack Assembly and Method, PI20093259, 2009

Method and System for Determining End of Life Strategy for Products, PI20095013,

2009

Nanocoolant for manufacturing and automotive application,PI20106510

16. Research Interests

• Nanofluid

• Heat transfer

• Machining operation

• Nontraditional Machining Operations

• Optimization of Manufacturing Processes

• Artificial Intelligent in Manufacturing Process

17. TEACHING ASSIGNMENTS (Undergraduate and Postgraduate)

• Mechanics II : Dynamic tutorial (30 students)

• Mechanics of Materials Lab

• Manufacturing Process Lab

• Thermodynamic 2 (BMM 2523 2007/2008 – 6 credit (240 students))

13

• Thermodynamic 1 (BMM 2513 2007/2008 (short semester) – 6 credit (30

students))


• Thermodynamic 2 (BMM 2523 2008/2009 – 6 credit (242students))

• Industrial Engineering( BMM3633 2008/2009 - 3 credits (225 Students))

• Thermodynamic 2 (BMM 2523 2008/2009 (short semester) – 6 credit (30

students))


• Product Planning Control (BMM 4703 2009/2010 – 3 credit)

• Fundamental of Engineering (BMM1011 2009/2010 – 3 credit)

• Engineering Materials (BMM 1523 2009/2010 – 3 credit)

• Final Year Project 1( BMM3912 - 2 credits )

• Final Year Project 2 (BMM3923 - 4 credits )

• Industrial Training (BMM4999 - 9 credit)

• Industrial Training Report (BMM4993 – 3 credit)

• Computer Aided Engineering (BMM 2011 – 2credit)

• Quality Enviromental Management System (BMM 2021 – 2 credit)

• Quality Engineering (BMM 4627 – 4 credit)

• DFMA (BMM 4626 – 4 credit)

• Mechanical System Design (BMM 4623 – 4 credit)

• Precision Engineering (MKM 1243)

• Mechanical Engineering Design (MME 6143)

18. Computer & Programming Skill

• Autocad Advanced

• Catia Advanced

• Cam Advanced

• Fotran Advanced

• Neuron solution Advanced

• Minitab Advanced

• Finite Element Analysis Advanced

19. STRENGTH

• Optimization

• Dynamic team player

• Sense of responsibility

• Highly inquisitive

• Creative and resourceful

• Excellent skills in communication and collaboration

14

20. International Journal papers

1. Khan, M.A.R., Rahman, M.M., Kadirgama, K.An experimental investigation

on surface finish in die-sinking EDM of Ti-5Al-2.5Sn (2015) International

Journal of Advanced Manufacturing Technology, 14 p. Article in Press.

2. Muthusamy, Y., Kadirgama, K., Rahman, M.M., Ramasamy, D., Sharma,

K.V. Wear analysis when machining AISI 304 with ethylene glycol/TIO2

nanoparticle-based coolant (2015), International Journal of Advanced

Manufacturing Technology. Article in Press

3. Sivaraos, Darwis, F., Kadirgama, K, Amran, M., Lajis, M.A, Hardness and

microstructural investigation of laser welded SS400 steel performed by CO2

laser cutting machine (2015), International Journal of Applied Engineering

Research

4. Sahid, N.S.M., Rahman, M.M., Kadirgama, K, Neural network modeling of

grinding parameters of ductile cast iron using minimum quantity lubrication

(2015), International Journal of Automotive and Mechanical Engineering,11

5. Shukri, M.R., Rahman, M.M., Ramasamy, D., Kadirgama, K, Artificial neural

network optimization modeling on engine performance of diesel engine using

biodiesel fuel (2015), International Journal of Automotive and Mechanical

Engineering,11

6. Sivaraos, Raguvaran, M.J., Dahlan, A.S., Kadirgama, K., Amran, M.A, Air

permeability investigation towards automotive tyre pressure sustainability and

life saving (2015), ARPN Journal of Engineering and Applied Sciences

7. Ramasamy, D., Kadirgama, K., Rahman, M.M., Zainal, Z.A, Analysis of

compressed natural gas burn rate and flame propagation on a sub-compact

vehicle engine (2015), International Journal of Automotive and Mechanical

Engineering,11

8. Hasan, M.M., Rahman, M.M., Kadirgama, K, A review on homogeneous

charge compression ignition engine performance using biodiesel-diesel blend

as a fuel (2015), International Journal of Automotive and Mechanical

Engineering,11

9. Yogeswaran, M., Kadirgama, K., Rahman, M.M., Devarajan, R, Temperature

analysis when using ethylene-glycol-based TiO2 as a new coolant for

milling,(2015), International Journal of Automotive and Mechanical

Engineering,11

15

10. Hussein, A.M., Bakar, R.A., Kadirgama, K. Study of forced convection

nanofluid heat transfer in the automotive cooling system (2014) Case Studies

in Thermal Engineering, 2, pp. 50-61.

11. Kadirgama, K., Rahman, M., Mohamed, B., Bakar, R.A., Ismail, A.R.

Development of temperature statistical model when machining of aerospace

alloy materials (2014) Thermal Science, 18, pp. S269-S282.

12. Hussein, A.M., Bakar, R.A., Kadirgama, K., Sharma, K.V. Heat transfer

augmentation of a car radiator using nanofluids (2014) Heat and Mass

Transfer/Waerme- und Stoffuebertragung, 50 (11), pp. 1553-1561.

13. Puvanesan, M., Rahman, M.M., Najiha, M.S., Kadirgama, K. Experimental

investigation of minimum quantity lubrication on tool wear in aluminum alloy

6061-T6 using different cutting tools (2014) International Journal of

Automotive and Mechanical Engineering, 9 (1), pp. 1538-1549.

14. Puvanesan, M., Rahman, M.M., Najiha, M.S., Kadirgama, K.Experimental

investigation of minimum quantity lubrication on tool wear in aluminum alloy

6061-T6 using different cutting tools (2014) International Journal of


15. Hussein, A.M., Sharma, K.V., Bakar, R.A., Kadirgama, K.A review of forced

convection heat transfer enhancement and hydrodynamic characteristics of a

nanofluid (2014) Renewable and Sustainable Energy Reviews, 29, pp. 734-

743.

16. Khan, M.A.R., Rahman, M.M., Kadirgama, K.Electrode wear rate of graphite

electrodes during electrical discharge machining processes on titanium alloy

Ti-5Al-2.5SN (2014) International Journal of Automotive and Mechanical

Engineering, 9 (1), pp. 1782-1792.

17. Rahman, M.M., Kadirgama, K., Ab Aziz, A.S.Artificial neural network

modeling of grinding of ductile cast iron using water based SiO2 nanocoolant

(2014) International Journal of Automotive and Mechanical Engineering, 9

(1), pp. 1649-1661.

18. Hussein, A.M., Bakar, R.A., Kadirgama, K., Sharma, K.V. Heat transfer

enhancement using nanofluids in an automotive cooling system (2014)

International Communications in Heat and Mass Transfer, 53, pp. 195-202.

19. Kadirgama, K., Amirruddin, A.K., Bakar, R.A. Estimation of solar radiation

by artificial networks: East coast Malaysia (2014) Energy Procedia, 52, pp.

383-388.

20. Razak, N.H., Rahman, M.M., Kadirgama, K.Experimental study on surface

integrity in end milling of Hastelloy C-2000 superalloy (2014) International

Journal of Automotive and Mechanical Engineering, 9 (1), pp. 1578-1587.

16

21. Hussein, A.M., Bakar, R.A., Kadirgama, K., Sharma, K.V. Simulation study

of turbulent convective heat transfer enhancement in heated tube flow using

TiO2-water nanofluid (2013) IOP Conference Series: Materials Science and

Engineering, 50 (1),

22. Hussein, A.M., Sharma, K.V., Bakar, R.A., Kadirgama, K.The effect of cross

sectional area of tube on friction factor and heat transfer nanofluid turbulent

flow (2013) International Communications in Heat and Mass Transfer, 47, pp.

49-55.

23. Hussein, A.M., Sharma, K.V., Bakar, R.A., Kadirgama, K.The effect of

nanofluid volume concentration on heat transfer and friction factor inside a

horizontal tube (2013) Journal of Nanomaterials, 2013, art. no. 859563, .

24. Ismail, A.R., Karagaratnan, S.K., Kadirgama, K.Thermal comfort findings:

Scenario at Malaysian automotive industry (2013) Thermal Science, 17 (2),

pp. 387-396.

25. Hussein, A.M., Bakar, R.A., Kadirgama, K., Sharma, K.V. Experimental

measurement of nanofluids thermal properties (2013) International Journal of


26. Mahendran, M., Lee, G.C., Shahrani, A., Bakar, R.A., Kadirgama, K., Amir,

A.R., Sharma, K.V.Diurnal pattern and estimation of global solar radiation in

east coast Malaysia (2013) International Journal of Automotive and

Mechanical Engineering, 8 (1), pp. 1162-1175.

27. Ashikur Rahman Khan, M., Rahman, M.M., Kadirgama, K., Ismail, A.R.

RSM model to evaluate material removal rate in EDM of Ti-5Al-2.5Sn using

graphite electrode (2012) IOP Conference Series: Materials Science and

Engineering, 36 (1), art. no. 012016, .

28. Rahman Khan, M.A., Rahman, M.M., Kadirgama, K., Ismail, A.R.

Mathematical model for wear rate of negative graphite electrode in electrical

discharge machining on Ti-5A1-2.5Sn (2012) Jurnal Teknologi (Sciences and

Engineering), 59 (SUPPL.2), pp. 55-59.

29. Razak, N.H., Rahman, M.M., Kadirgama, K.Response surface design model to

predict surface roughness when machining hastelloy C-2000 using uncoated

carbide insert (2012) IOP Conference Series: Materials Science and

Engineering, 36 (1), art. no. 012022, .

30. Kadirgama, K., Noor, M.M., Rahman, M.M. Optimization of Surface

Roughness in End Milling Using Potential Support Vector Machine (2012)

Arabian Journal for Science and Engineering, 37 (8), pp. 2269-2275.

17

31. Khan, M.A.R., Rahman, M.M., Kadirgama, K.Mathematical model and

optimization of surface roughness during electrical discharge machining of Ti-

5Al-2.5Sn with graphite electrode (2012) Advanced Science Letters, 15 (1),

pp. 367-372.

32. Khan, M.A.R., Rahman, M.M., Kadirgama, K., Bakar, R.A.Artificial neural

network model for material removal rate of TI-15-3 in electrical discharge

machining (2012) Energy Education Science and Technology Part A: Energy

Science and Research, 29 (2), pp. 1025-1038.

33. Najiha, M.S., Rahman, M.M., Yusoff, A.R., Kadirgama, K.Investigation of

flow behavior in minimum quantity lubrication nozzle for end milling

processes (2012) International Journal of Automotive and Mechanical

Engineering, 6 (1), pp. 768-776.

34. Kamil, M., Rahman, M.M., Bakar, R.A., Kadirgama, K.Modeling of SI engine

for duel fuels of hydrogen, gasoline and methane with port injection feeding

system (2012) Energy Education Science and Technology Part A: Energy

Science and Research, 29 (2), pp. 1399-1416.

35. Razak, N.H., Rahman, M.M., Kadirgama, K. Investigation of machined

surface in end-milling operation of hastelloy C-2000 using uncoated-carbide

insert (2012) Advanced Science Letters, 13, pp. 300-305.

36. Amirruddin, A.K., Noor, M.M., Kadirgama, K., Sharma, K.V.The potential of

wind and solar energy in malaysia east coast: Preliminary study at Universiti

Malaysia Pahang (UMP) (2011) WIT Transactions on Ecology and the

Environment, 148, pp. 475-482.

37. Rahman, M.M., Hamada, K.I., Kadirgama, K. Heat transfer of intake port for

hydrogen fueled port injection engine: A steady state approach (2011)

International Journal of Physical Sciences, 6 (16), pp. 3969-3976.

38. Noor, M.M., Kadirgama, K., Rahman, M.M., Maleque, M.A. Pattern

recognition method to predict recycling strategy for electronic equipments

(2011) Advanced Materials Research, 264-265, pp. 949-955.

39. Khan, M.A.R., Rahman, M.M., Noor, M.M., Kadirgama, K., Maleque, M.A.

Current research trends on dry, near-dry and powder mixed electrical

discharge machining (2011) Advanced Materials Research, 264-265, pp. 956-

961.

40. Noor, M.M., Kadirgama, K., Rahman, M.M., Maleque, M.A. Prediction of

recycle method using relevance vector machine (2011) Advanced Materials

Research, 264-265, pp. 943-948.

41. Rahman, M.M., Noor, M.M., Kadirgama, K., Maleque, M.A., Bakar, R.A.

Modeling, analysis and fatigue life prediction of lower suspension arm (2011)

Advanced Materials Research, 264-265, pp. 1557-1562.

18

42. Noor, M.M., Kadirgama, K., Rahman, M.M. Particle swarm optimisation

prediction model for surface roughness (2011) International Journal of

Physical Sciences, 6 (13), pp. 3082-3090.

43. Sani, M.S.M., Rahman, M.M., Noor, M.M., Kadirgama, K., Izham, M.H.N.

Identification of dynamics modal parameter for car chassis (2011) IOP

Conference Series: Materials Science and Engineering, 17 (1), art. no. 012038,

44. Rahman, M.M., Ibrahim, T.K., Kadirgama, K., Mamat, R., Bakar, R.A.

Influence of operation conditions and ambient temperature on performance of

gas turbine power plant (2011) Advanced Materials Research, 189-193, pp.

3007-3013.

45. Rahman, M.M., Khan, M.A.R., Noor, M.M., Kadirgama, K., Bakar, R.A.

Optimization of machining parameters on surface roughness in EDM of Ti-

6Al-4V using response surface method (2011) Advanced Materials Research,

213, pp. 402-408.

46. Rahman, M.M., Mohyaldeen, H.M., Noor, M.M., Kadirgama, K., Bakar, R.A.

Linear static response of suspension arm based on artificial neural network

technique (2011) Advanced Materials Research, 213, pp. 419-426.

47. Rahman, M.M., Khan, M.A.R., Kadirgama, K., Noor, M.M., Bakar, R.A.

Experimental investigation into electrical discharge machining of stainless

steel 304 (2011) Journal of Applied Sciences, 11 (3), pp. 549-554.

48. Khan, M.A.R., Rahman, M.M., Kadirgama, K., Maleque, M.A., Bakar, R.A.

Artificial intelligence model to predict surface roughness of Ti-15-3 Alloy in

EDM process (2011) World Academy of Science, Engineering and

Technology, 50, pp. 194-198.

49. Khan, M.A.R., Rahman, M.M., Kadirgama, K., Maleque, M.A., Bakar, R.A.

Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in

EDM process (2011) World Academy of Science, Engineering and

Technology, 74, pp. 198-202.

50. Kadirgama, K., Abou-El-Hossein, K.A., Noor, M.M., Sharma, K.V.,

Mohammad, B. Tool life and wear mechanism when machining Hastelloy C-

22HS (2011) Wear, 270 (3-4), pp. 258-268.

51. Rahman, M.M., Hamada, K.I., Noor, M.M., Kadirgama, K., Bakar, R.A.,

Rahim, M.F.A.Heat transfer characteristics in exhaust port for hydrogen

fueled port injection engine: A transient approach (2011) Advanced Materials

Research, 152-153, pp. 1909-1914.

52. Rahman, M.M., Khan, M.A.R., Kadirgama, K., Noor, M.M., Bakar,

R.A.Optimization of machining parameters on tool wear rate of Ti-6Al-4V

through EDM using copper tungsten electrode: A statistical approach (2011)

Advanced Materials Research, 152-153, pp. 1595-1602.

19

53. Rahman, M.M., Hamada, K.I., Noor, M.M., Bakar, R.A., Kadirgama, K.,

Maleque, M.A. In-cylinder heat transfer characteristics of hydrogen fueled

engine: A steady state approach (2010) American Journal of Environmental

Sciences, 6 (2), pp. 124-129.

54. Rahman, M.M., Hamada, K.I., Noor, M.M., Bakar, R.A., Kadirgama, K.,

Maleque, M.A.Transient in-cylinder gas flow characteristics of single cylinder

port injection hydrogen fueled engine (2010) American Journal of Applied

Sciences, 7 (10), pp. 1364-1371.

55. Rahman, M.M., Khan, Md.A.R., Kadirgama, K., Noor, M.M., Bakar, R.A.

Mathematical modeling of material removal rate for Ti-5Al-2.5Sn through

EDM process: A surface response method (2010) European Conference of

Chemical Engineering, ECCE'10, European Conference of Civil Engineering,

ECCIE'10, European Conference of Mechanical Engineering, ECME'10,

European Conference of Control, ECC'10, pp. 34-37.

56. Rahman, M.M., Hamada, K.I., Noor, M.M., Kadirgama, K., Bakar, R.A.

Effect of intake conditions on heat transfer characteristics for port injection

hydrogen fueled engine (2010) ICMET 2010 - 2010 International Conference

on Mechanical and Electrical Technology, Proceedings, art. no. 5598419, pp.

549-554.

57. Kadirgama, K., Noor, M.M., Rahman, M.M., Sani, M.S.M., Rejab, M.R.M.,

Bakar, R.A., Abou-El-Hossein, K.A.Prediction modeling of power and torque

in end-milling (2010) WIT Transactions on the Built Environment, 112, pp.

409-418.

58. Noor, M.M., Kadirgama, K., Rahman, M.M., Rejab, M.R.M., Sani, M.S.M.,

Mon, T.T., Bakar, R.A.Development of statistical model to predict Ra and Rz

in laser cutting (2010) WIT Transactions on the Built Environment, 112, pp.

401-408.

59. Sani, M.S.M., Noor, M.M., Zainury, M.S.M., Rejab, M.R.M., Kadirgama, K.,

Rahman, M.M.Investigation on modal transient response analysis of engine

crankshaft structure (2010) WIT Transactions on the Built Environment, 112,

pp. 419-428.

60. Rejab, M.R.M., Sani, M.S.M., Noor, M.M., Kadirgama, K., Rahman, M.M.,

Alias, A.Mechanical behaviour of polymeric foam core at various orientation

angles (2010) WIT Transactions on the Built Environment, 112, pp. 429-438.

61. Habeeb, H.H., Kadirgama, K., Noor, M.M., Rahman, M.M., Mohammad, B.,

Bakar, R.A., Abouel Hossein, K.A.Machining of nickel alloy 242 with cubic

boron nitride tools (2010) Journal of Applied Sciences, 10 (19), pp. 2322-

2327.

62. Rahman, M.M., Khan, M.A.R., Kadirgama, K., Noor, M.M., Bakar,

R.A.Modeling of material removal on machining of Ti-6Al-4V through EDM

20

using copper tungsten electrode and positive polarity (2010) World Academy

of Science, Engineering and Technology, 71, pp. 576-581.

63. Kadirgama, K., Noor, M.M., Abou-El-Hossein, K.A., Habeeb, H.H., Rahman,

M.M., Mohamad, B., Bakar, R.A.Effect of dry cutting on force and tool life

when machining aerospace material (2010) World Academy of Science,

Engineering and Technology, 71, pp. 452-456.

64. Rahman, M.M., Hamada, K.I., Noor, M.M., Kadirgama, K., Maleque, M.A.,

Bakar, R.A.Heat transfer characteristics of intake port for spark ignition

engine: A comparative study (2010) Journal of Applied Sciences, 10 (18), pp.

2019-2026.

65. Kadirgama, K., Noor, M.M., Harun, W.S.W., Aboue-El-Hossein,

K.A.Optimisation of heat affected zone by partial swarm optimisation in air

plasma cutting operation (2010) Journal of Scientific and Industrial Research,

69 (6), pp. 439-443.

66. Noor, M.M., Kadirgama, K., Habeeb, H.H., Rahman, M.M., Mohammad, B.

Performance of carbide cutting tools when machining of nickel based alloy

(2010) International Journal of Material Forming, 3 (SUPPL. 1), pp. 475-478.

67. Kadirgama, K., Noor, M.M., Rahman, M.M., Sani, M.S.M., Abou-El-Hossein,

K.A.Optimised tool life by partial swarm optimisation (2010) International

Journal of Material Forming, 3 (SUPPL. 1), pp. 479-482.

68. Kadirgama, K., Noor, M.M., Abd Alla, A.N.Response ant colony optimization

of end milling surface roughness (2010) Sensors, 10 (3), pp. 2054-2063.

69. Noor, M.M., Kadirgama, K., Rahman, M.M., Zuki, N.M., Rejab, M.R.M.,

Muhamad, K.F., Mohamed, J.J. Prediction modelling of surface roughness for

laser beam cutting on acrylic sheets (2010) Advanced Materials Research, 83-

86, pp. 793-800.

70. Kadirgama, K., Noor, M.M., Abou-El-Hossein, K.A., Mohammad, B.,

Habeeb, H.H.Aspects of wear mechanisms of carbide tools when machine

Hastelloy C-22HS (2010) Advanced Materials Research, 83-86, pp. 295-302.

71. Sharma, K.V., Suryanarayana, K.V., Sarma, P.K., Rahman, M.M., Noor,

M.M., Kadirgama, K.Experimental investigations of oxygen stripping from

feed water in a spray and tray type de-aerator (2010) International Journal of


72. Rahman, M.M., Mohyaldeen, H.M., Noor, M.M., Kadirgama, K., Bakar, R.A.

RETRACTED ARTICLE: Robust design of suspension arm based on

stochastic design improvement (2010) ICMEE 2010 - 2010 2nd International

Conference on Mechanical and Electronics Engineering, Proceedings, 1, art.

no. 5558508, pp. V1460-V1464.

21

73. Kadirgama, K., Abou-El-Hossein, K.A.Prediction of torque in milling by

response surface method and neural network (2009) International Journal of

Modelling and Simulation, 29 (1), pp. 19-25.

74. Harun, W.S.W., Sharif, S., Idris, M.H., Kadirgama, K.Characteristic studies of

collapsibility of ABS patterns produced from FDM for investment casting

(2009) Materials Research Innovations, 13 (3), pp. 340-343.

75. Rahman, M.M., Ariffin, A.K., Rejab, M.R.M., Kadirgama, K., Noor,

M.M.Multiaxial fatigue behavior of cylinder head for a free piston linear

engine (2009) Journal of Applied Sciences, 9 (15), pp. 2725-2734.

76. Kadirgama, K., Noor, M.M., Rahman, M.M., Bakar, R.A., Hossein, A.-

E.Fourth order torque prediction model in end milling (2009) Journal of

Applied Sciences, 9 (13), pp. 2431-2437.

77. Kadirgama, K., Noor, M.M., Rahman, M.M., Harun, W.S.W., Haron, C.H.C.

Finite element analysis and statistical method to determine temperature

distribution on cutting tool in end-milling (2009) European Journal of

Scientific Research, 30 (3), pp. 451-463.

78. Rahman, M.M., Kadirgama, K., Noor, M.M., Rejab, M.R.M., Bakar,

R.A.,Harun, W.S.W.An experimental investigation into the effect of minimum

quality lubricant on cutting temperature for machinability of AISI 9310 steel

alloy (2009) European Journal of Scientific Research, 29 (4), pp. 502-508.

79. Rahman, M.M., Kadirgama, K., Noor, M.M., Rejab, M.R.M., Kesulai,

S.A.Fatigue life prediction of lower suspension arm using strain-life approach

(2009) European Journal of Scientific Research, 30 (3), pp. 437-450.

80. Kadirgama, K., Noor, M.M., Rahman, M.M., Rejab, M.R.M., Haron, C.H.C.,

Abou-El-Hossein, K.A.Surface roughness prediction model of 6061-T6

aluminium alloy machining using statistical method (2009) European Journal

of Scientific Research, 25 (2), pp. 250-256.

81. Rahman, M.M., Noor, M.M., Kadirgama, K., Rejab, M.R.M.Study of air fuel

ratio on engine performance of direct injection hydrogen fueled engine (2009)

European Journal of Scientific Research, 34 (4), pp. 506-513.

82. Kadirgama, K., Abou-El-Hossein, K.A., Mohammad, B., Noor, M.M.,

Sapuan, S.M.Prediction of tool life by statistic method in end-milling

operation (2008) Scientific Research and Essays, 3 (5), pp. 180-186.

83. Kadirgama, K., Abou-El-Hossein, K.A., Mohammad, B., Al-Ani, H., Noor,

M.M.Cutting force prediction model by FEA and RSM when machining

Hastelloy C-22HS with 90° holder (2008) Journal of Scientific and Industrial

Research, 67 (6), pp. 421-427.

84. Habeeb, H.H., Abou-El-Hossein, K.A., Mohammad, B., Kadirgama, K.Effect

of tool holder geometry and cutting condition when milling nickel-based alloy

22

242 (2008) Journal of Materials Processing Technology, 201 (1-3), pp. 483-

485.

85. Ng, K.C., Kadirgama, K., Ng, E.Y.K.Response surface models for CFD

predictions of air diffusion performance index in a displacement ventilated

office (2008) Energy and Buildings, 40 (5), pp. 774-781.

86. Kadirgama, K., Abou-El-Hossein, K.A., Mohammad, B., Habeeb, H.Statistical

model to determine surface roughness when milling hastelloy C-22HS (2007)

Journal of Mechanical Science and Technology, 21 (10), pp. 1651-1655.

87. Kadirgama, K., Abou-El-Hossein, K.A., Mohammad, B., Habeeb, H.A fem

analysis to determine effect of milling parameters on plastic strain and plastic

strain-rate distribution when milling hastelloy C-22HS (2007) Multidiscipline

Modeling in Materials and Structures, 3 (3), pp. 313-324.

88. Abou-El-Hossein, K.A., Kadirgama, K., Hamdi, M., Benyounis,

K.Y.Prediction of cutting force in end-milling operation of modified AISI P20

tool steel (2007) Journal of Materials Processing Technology, 182 (1-3), pp.

241-247.

89. Kadirgama, K., Abou-El-Hossein, K.A.Torque, power and cutting force

prediction model by using response surface method and factorial design

(2007) European Journal of Scientific Research, 18 (1), pp. 20-44.

90. Kadirgama, K., Abou-El-Hossein, K.A.Torque and cutting force prediction

model by using response surface method (2006) International Journal of

Applied Mathematics and Statistics, 4 (MO6), pp. 11-30.

91. Kadirgama, K., Abou-El-Hossein, K.A.Prediction of cutting force model by

using neural network (2006) Journal of Applied Sciences, 6 (1), pp. 31-34.

92. Kadirgama, K., Abou-El-Hossein, K.A.Torque prediction model for milling

618 stainless steel using response surface methodology (2006) Journal of

Applied Sciences, 6 (3), pp. 518-523.

21.International/National Conference papers

1 K.Kadirgama, K.A.Abou-El-Hossein. (2005),’ Study on Tool Wear

Mechanisms during End-Milling Operations of 618 Tool Steel,’14th

Scientific Conference and 15th Annual General meeting of the Electron

Microscopy Society of Malaysia, Malaysia.

2 K.Kadirgama, K.A.Abou-El-Hossein. (2005),’Resultant cutting force

prediction model by statistical method and artificial intelligent method,’

Proceedings of the Student Conference on Research and Development

(SCORED 2005), Universiti Tenaga Nasional, Malaysia.

23

3 K.A.Abou-El-Hossein, K.Kadirgama. (2005),’ Application of Experimental

Design Techniques to predict Cutting Force in milling,’ National Seminar

on Science and Its Applications in Industry 2006, Kolej University

Technical Kebangsaan Malaysia, Malaysia.

4 K.Kadirgama, K.A.Abou-El-Hossein, M.Bashir (2006),’ Modelling and

Prediction of Cutting Force by AI, RSM and CANFIS in Milling’,

International Conference on Manufacturing Science & Technology,

Multimedia University, Malaysia.

5 K,Kadirgama, K.A.Abou-El-Hossein, M.Bashir, H,Habeeb (2007),’ Effect

of milling parameters towards temperature and heat distribution in end-

milling’, Third International Conference on Thermal Engineering: Theory

and Applications, Hashemite University (Jordan) and Ryerson University

(Canada), Jordan.

6 K,Kadirgama, K.A.Abou-El-Hossein, M.Bashir, H,Habeeb (2007), A FEM

analysis to determine effect of Milling Parameters on Plastic Strain

Distribution When Milling Hastelloy C-22HS, Proceedings of the Student

Conference on Research and Development (SCORED 2007), Universiti

Tenaga Nasional, Malaysia.

7 K,Kadirgama, K.A.Abou-El-Hossein, M.Bashir, H,Habeeb (2007), “First

and second order statistical model to determine surface roughness when

milling HASTELLOY C-22HS with PVD and CVD coated carbide cutting

tools”, The 10th International Conference on Advances in Materials and

Processing Technologies, Daejeon, Korea.

8 Habeeb H. H, Bashir Mohamad, K.A.Abou-El-Hossein, K. Kadirgama,

Machining of Nickel Alloy 242 With PVD and CVD Cutting Tools,

Proceedings of the Student Conference on Research and Development

(SCORED), May 2007, Universiti Tenaga Nasional, Malaysia.

9 M.M.Noor, K.Kadirgama, N.M.Zuki.N.M, K.F.Muhamad, M.R.M.Rejab

(2008), A Surface Roughness Prediction Model for Laser Beam Cutting

(LBC) on Arcylic sheets, International Conference on Advanced in

Materials and Processing Technologies, AMPT2008, Manama, Bahrain.

10 K,Kadirgama, K.A.Abou-El-Hossein, M.Bashir, H,Habeeb (2008),

“Aspects of Wear Mechanisms of Carbide Tools when Machinining

Hastelloy C-22HS”,International Conference on Advanced in Materials and

Processing Technologies, AMPT2008, Manama, Bahrain.

14. K.Kadirgama, M.M.Noor, M.M.Rahman, M.S.M.Sani, N.M.Zuki.N.M, K.

A. Abou-El-Hossein, “Prediction Modelling of Power and Torque in End-

24

Milling”, Accepted for presentation in the 11th International Conference on

Optimum Design of Structures and Materials in Engineering (OPTI 2009), 8-

10 June 2009, Algarge, Portugal.

15. K.Kadirgama, M.M.Noor, R.Daud, Julie J.Mohamed, Z.Hamedon, N.M.

Zuki N.M, M.R.M. Rejab, M.S. Reza, “Design And Development of Blow

Mold using Machining Optimization Parameters”, DECON08 UTEM.

(Accepted)

16. K,Kadirgama, K.A.Abou-El-Hossein, M.Bashir, H,Habeeb (2008),

“Aspects of Wear Mechanisms of Carbide Tools when Machinining

Hastelloy C-22HS”,International Conference on Advanced in Materials

and Processing Technologies, AMPT2008, Manama, Bahrain.

17. K.Kadirgama, M.M.Noor, M.M.Rahman, M.S.M.Sani, Rosli A.Bakar, K.

A. Abou-El-Hossein, “Prediction Modelling of Power and Torque in End-

Milling”, 11th International Conference on Optimum Design of Structures

and Materials in Engineering (OPTI 2009), 8-10 June, Algarve, Portugal,

2009.

18. K.Kadirgama, M.M.Noor, M.M.Rahman, M.R.M.Rejab, M.S.M.Sani,

N.M.Zuki.N.M, Rosli A. Bakar, “Prediction Modelling of Torque in End-

Milling”, 2nd Engineering Conference on Sustainable Engineering

Infrastructures Development & Management (ENCON 08), 18-19 December

Crowne Plaza Riverside Hotel, Kuching, Sarawak, Malaysia, 2008.

19. K.Kadirgama, K.A.Abou-El-Hossein, M.M.Noor, M.R.M.Rejab,

B.Mohammad, “Modelling of Tool Life when Milling Nickel Base Super

alloys with Two Differently Coated Carbide Inserts”, 2nd South African

International Aerospace Symposium (SAIAS08), 14~16Sep, Stellenbosch,

South Africa, 1~7, 2008.

20. K.Kadirgama, M.M.Noor, M.M.Rahman, Habeeb H.H., A.K.M.Nurul

Amin, B.Mohammad, Tool life prediction model for machining of power

generation component, AMPT 2009,UIA

21. K.Kadirgama, M.M.Noor, M.M.Rahman, Habeeb H.H., A.K.M.Nurul

Amin, B.Mohammad, Study of chips texture when machining aerospace

materials, AMPT 2009,UIA

22. , K.Kadirgama M.M.Noor, M.R.M.Rejab, W.S.W.Harun, Julie J.

Mohamed, M.A.Omar, “Distribution of Temperature When End Milling

Aged Hardened Alloy” The 1st AUN/SEED-Net Regional Conference on

Materials 2009, 16~17 February 2009, Equatorial Hotel Penang, Malaysia.

23. K. Kadirgama, M.M.Noor, M.R.M.Rejab, M.S.M.Sani, T.T.Mon, Julie J.

Mohamed “Wear and Tool Life Characteristics when Machining Aerospace

25

Materials” The 1st AUN/SEED-Net Regional Conference on Materials 2009,

16~17 February 2009, Equatorial Hotel Penang, Malaysia.

24. K.Kadirgama, M.M.Noor, N.M.Zuki N.M., M.R.M.Rejab, B.Mohammad,

“Prediction of Cutting Force by Numerical Solution and Statistic Method in

End-Milling Operation”, 2nd International Conference on Science and

Technology, Applications in Industry and Education, ICSTIE08, 12~13

December, UiTM Penang, 466-472, ISBN 978-983-42204-1-9, 2008.

25. K.Kadirgama, M.M.Noor, M.M.Rahman, Rosli A.Bakar, B.Mohammad,”

Experimental and Numerical Study of Cutting Force in End-Milling

Operation Using Statistical Method”, 12th CIRP Conference on Modeling

of Machining Operations, San Sebastian, Spain, May 2009

26. K.Kadirgama, M.M.Noor, R.Daud, M.R.M.Rejab, M.S.M.Sani, Z.Ghazalli,

Z.Hamedon, “Development of New Genetic Algorithm Software for Blow

Mould Process”, Malaysian Science and Technology Congress, MSTC08,

16~17 Dec, KLCC, Malaysia, 643-647, 2008.

27. K.Kadirgama, M.M.Noor, R.Daud, M.M.Rahman, N.M.Zuki.N.M,

M.R.M.Rejab, B.Mohammad, “Design And Development of Blow Mold

using Machining Optimization Parameters”, National Conference on Design

and Concurrent Engineering (DECON08), 28-29th October, Avillion Legacy

Hotel, Melaka, 211-216, ISBN 978-983-2948-54-4, 2008.

28. M.M.Noor, K.Kadirgama, M.M.Rahman, Rosli A. Bakar, C.H.C.Haron,

“Response Surface Method and Neural Network to Determine Surface

Roughness for Laser Cutting on Acrylic Sheets”, 12th CIRP International

Conference On Modelling Of Machining Operations, (CIRP CMMO’09), 7-

8 May, Donostia-San Sebastian, Spain, Vol. 2, 851-858, ISBN: 978-84-608-

0866-4, 2009. (Scopus and Thomson ISI Indexing)

29. K.Kadirgama, M.M.Noor, M.M.Rahman, Rosli A.Bakar, B.Mohammad,

“Experimental and Numerical Study of Cutting Force in End-Milling

Operation Using Statistical Method”, 12th CIRP International Conference

On Modelling Of Machining Operations, (CIRP CMMO’09), 7-8 May,

Donostia-San Sebastian, Spain, Vol. 2, 843-850, ISBN: 978-84-608-0866-4,

2009. (Scopus and Thomson ISI Indexing)

30. M.M.Noor, K.Kadirgama, M.M.Rahman, M.R.M.Rejab, Rosli A.Bakar,

S.M.Sapuan, A.G.Olabi, “Laser Machining Of Acrylic Sheet for Industrial

Jigs Application”, 11th International Conference on Optimum Design of

Structures and Materials in Engineering (OPTI09), 8-10 June, Algarve,

Portugal, 2009. (Scopus and Thomson ISI Indexing)

31. M.R.M.Rejab, M.S.M.Sani, M.M.Noor, K.Kadirgama, M.M.Rahman,

A.Alias, “Mechanical Behaviour of Polymeric Foam Core at Various

Orientation Angles”, 11th International Conference on Optimum Design of

Structures and Materials in Engineering (OPTI09), 8-10 June, Algarve,

Portugal, 2009. (Scopus and Thomson ISI Indexing)

26

32. M.S.M.Sani, M.S.M. Zainury, M.R.M.Rejab, M.M.Noor, K.Kadirgama,

M.M.Rahman, “Investigation on Modal Transient Response Analysis of

Engine Crankshaft Structure”, 11th International Conference on Optimum

Design of Structures and Materials in Engineering (OPTI09), 8-10 June,

Algarve, Portugal, 2009. (Scopus and Thomson ISI Indexing)

33. K.Kadirgama, M.M.Noor, M.M.Rahman, M.S.M.Sani, Rosli A.Bakar, K. A.

Abou-El-Hossein, “Prediction Modelling of Power and Torque in End-

Milling”, 11th International Conference on Optimum Design of Structures

and Materials in Engineering (OPTI09), 8-10 June, Algarve, Portugal, 2009.

(Scopus and Thomson ISI Indexing)

34. M.M.Noor, K.Kadirgama, M.R.M.Rejab, W.S.W.Harun, Julie J.Mohamed,

M.A.Omar, “Distribution of Temperature When End Milling Aged Hardened

Alloy” The 1st AUN/SEED-Net Regional Conference on Materials 2009

(RCM09), 16~17 February, Equatorial Hotel Penang, Malaysia, 2009.

35. K.Kadirgama, M.M.Noor, M.R.M.Rejab, M.S.M.Sani, T.T.Mon, Julie

J.Mohamed “Wear and Tool Life Characteristics when Machining Aerospace

Materials” The 1st AUN/SEED-Net Regional Conference on Materials 2009

(RCM09), 16~17 February, Equatorial Hotel Penang, Malaysia, 2009.

36. M.M.Rahman, M.M.Noor, K. Kadirgama, M.R.M.Rejab, W.S.W. Harun,

M.S.M.Sani, “Study of Minimum Quality Lubricant on Chip-Tool Interface

Temperature under Different Cutting Velocity and Feed Rate”, The 1st

AUN/SEED-Net Regional Conference on Materials 2009 (RCM09), 16~17

February, Equatorial Hotel Penang, Malaysia, 2009.

37. M.R.M.Rejab, W.A.W.Hassan, M.M.Noor, K.Kadirgama, M.M.Rahman,

A.Alias, “Energy Absorption Efficiency of Polymeric Foams under Static

Compression Loading”, The 1st AUN/SEED-Net Regional Conference on

Materials 2009 (RCM09), 16~17 February, Equatorial Hotel Penang,

Malaysia, 2009.

38. M.A.Azmir, R.Daud, M.A.Hassan, S.H.Tomadi, M.M.Noor, M.R.M.Rejab,

“Optimization Drilling Process of Glass Fiber Reinforced Plastics”

International Conference on Industrial Engineering (ICINDE'09), 18~20

Mac, Hong Kong, ISBN: 978-988-17012-2-0, 2009.

39. R.Daud, N.K.Hasfa, S.H.Tomadi, M.A.Hassan, K.Kadirgama, M.M.Noor,

M.R.M.Rejab, “Prediction of Chatter in CNC Machining Based On Dynamic

Cutting Force for Ball End Milling”, International Conference on Industrial

Engineering (ICINDE'09), 18~20 Mac, Hong Kong, 1751-1756, ISBN: 978-

988-17012-2-0, 2009.

40. M.M.Noor, K.Kadirgama, M.M.Rahman, M.S.M.Sani, M.R.M.Rejab,

A.K.Ariffin, “Tool Life Analysis by Partial Swarm Optimisation” 6th

International Conference on Numerical Analysis in Engineering (NAE2009),

27

15 -16 May, 2009, Lombok Island, Mataram City, West Nusa Tenggara

Province, Indonesia.

41. K.Kadirgama, M.M.Noor, M.M.Rahman, M.S.M.Sani, A.K.Ariffin, “Surface

Roughness Analysis in End Milling With Response Ant Colony

Optimization“6th International Conference on Numerical Analysis in

Engineering (NAE2009), 15 -16 May, 2009, Lombok Island, Mataram City,

West Nusa Tenggara Province, Indonesia.

42. M.M.Noor, K.Kadirgama, M.Y.Taib, S.Mahendran, D.Ramasamy, “Analysis

of the JackCar”, Malaysian Technical Universities Conference and

Exhibition on Engineering and Technology (MUCEET09), 20~22 Jun, Ms

Garden Hotel, Kuantan, Malaysia, 2009.

43. M.R.M.Rejab, K.Kadirgama, M.M.Noor, Z.Ahmad@Manap, M.M.Rahman,

R.Daud, M.S.M.Sani, “An Investigation of Profiles for Plate Cams with

Vertical In-line Roller Followers”, Malaysian Technical Universities

Conference and Exhibition on Engineering and Technology (MUCEET09),

20~22 Jun, Ms Garden Hotel, Kuantan, Malaysia, 2009.

44. M.M.Rahman, M.M.Noor, K.Kadirgama, Rosli A.Bakar, M.R.M.Rejab,

“Finite Element Modelling, Analysis and Fatigue Life Prediction of Lower

Suspension Arm”, Malaysian Technical Universities Conference and



45. K.Kadirgama, M.M.Noor, M.S.M.Sani, M.M.Rahman, M.R.M.Rejab,

M.Y.Taib, A.Sulaiman, Abdullah Ibrahim, Rosli A.Bakar, “Student

Performance Analysis using Artificial Intelligent Technique”, Malaysian

Technical Universities Conference and Exhibition on Engineering and

Technology (MUCEET09), 20~22 Jun, Ms Garden Hotel, Kuantan,

Malaysia, 2009.

46. M.M.Noor, K.Kadirgama, M.M.Rahman, M.S.M.Sani, M.R.M.Rejab,

M.Y.Taib, Abdullah Ibrahim, Rosli A.Bakar, “The Entry Qualifications and

Gender Analysis for Student Performance by using Artificial Intelligent

Method”, Malaysian Technical Universities Conference and Exhibition on

Engineering and Technology (MUCEET09), 20~22 Jun, Ms Garden Hotel,

Kuantan, Malaysia, 2009.

47. K.Kadirgama, M.M.Noor, M.M.Rahman, M.Y.Taib, “Effect of Milling

Parameters towards Heat Distribution in End-Milling”, Malaysian Technical

Universities Conference and Exhibition on Engineering and Technology

(MUCEET09), 20~22 Jun, Ms Garden Hotel, Kuantan, Malaysia, 2009.

48. M.M.Rahman, M.M.Noor, K.Kadirgama, Rosli A.Bakar, “Machining

Characteristics in Turning of AISI 9310 with Dry, Wet and Minimum

Quantity Lubrication (MQL) Conditions”, Malaysian Technical Universities



28

49. Z.Ahmad@Manap, M.R.M.Rejab, M.M.Noor, R.Daud, M.S.M.Sani,

K.Kadirgama, “Effect of Adverse Environment on Buckling of Composite

Laminates”, Malaysian Technical Universities Conference and Exhibition on



50. K.Kadirgama, M.M.Noor, “Modelling of Residual Stresses in

HASTELLOY C-22HS after End Milling by Finite Element Analysis and

Response Surface Methodology”, Malaysian Technical Universities



51. Khalaf Hamada, M. M. Rahman, Mohammed K. Mohammed, Rosli A.

Bakar, M.M.Noor, K. Kadirgama, “Numerical Investigation of the In-

cylinder Flow Characteristics of Hydrogen Fuelled Internal Combustion

Engine”, Malaysian Technical Universities Conference and Exhibition on



52. M.M.Noor, K.Kadirgama, “Effect of Cutting Speed, Feed Rate, Axial Depth

and Radial Depth On Cutting Force In Milling of 618 Steel using PVD

Carbide Inserts.”, Malaysian Technical Universities Conference and



53. K.Kadirgama, M.M.Noor, M.M.Rahman, M.S.M.Sani, “The Analysis of

Heat Distribution and Temperature in End-Milling.”, Malaysian Technical



54. K.Kadirgama, M.M.Noor, M.M.Rahman, M.R.M.Rejab, “A FEM Analysis

to Determine effect of Milling Parameters on Plastic Strain Distribution

When Milling Hastelloy C-22HS”, Malaysian Technical Universities



55. K.Kadirgama, M.M.Noor, “Power Prediction Model for Milling 618

Stainless Steel using Response Surface Method”, Malaysian Technical



56. M.M.Rahman, Mohammed K.Mohammed, Rosli A.Bakar, M.M.Noor,

K.Kadirgama, “Modelling and Engine Performance of Direct Injection

Hydrogen Fuelled Engine”, Malaysian Technical Universities Conference

and Exhibition on Engineering and Technology (MUCEET09), 20~22 Jun,

Ms Garden Hotel, Kuantan, Malaysia, 2009.

57. K.Kadirgama, M.M.Noor, “Modelling of Residual Stresses in

HASTELLOY C-22HS after End Milling by Finite Element Analysis and

29

Response Surface Methodology”, Malaysian Technical Universities



58. M.S.M.Sani, M.H.N.Izham, M.R.M.Rejab, M.M.Noor, K.Kadirgama,

M.M.Rahman, “Identification of Dynamics Modal Parameter of Car Chassis

Structure”, Malaysian Technical Universities Conference and Exhibition on



59. M.M.Noor, K.Kadirgama, M.S.M.Sani, H.Ishak, “Experimental Study of the

Strength for the Spot Welding”, Malaysian Technical Universities



60. K.Kadirgama, M.M.Noor, H.H.Habeeb, “Machining of Nickel Alloy 242

with PVD and CVD Cutting Tools”, Malaysian Technical Universities



61. M.S.M.Sani, M.M.Noor, K.Kadirgama, M.M.Rahman, A.Senawi,

M.R.M.Rejab, M.Y.Taib, Abdullah Ibrahim, “Exit Surveys Assessment of

Bachelor Mechanical Engineering Programs at Universiti Malaysia Pahang”,

Malaysian Technical Universities Conference and Exhibition on Engineering

and Technology (MUCEET09), 20~22 Jun, Ms Garden Hotel, Kuantan,

Malaysia, 2009.

62. K.Kadirgama, M.M.Noor, W.S.W.Harun, M.M.Rahman, T.T.Mon,

“Optimisation of Heat Affected Zone by Ant Colony Optimisation in Air

Plasma Cutting Operation”, Malaysian Technical Universities Conference

and Exhibition on Engineering and Technology (MUCEET09), 20~22 Jun,

Ms Garden Hotel, Kuantan, Malaysia, 2009.

63. T.T.Mon, M.M.Noor, F.Ramli, Rosli A.Bakar, K.Kadirgama, “Finite

Element Analysis Thermal of Vehicle Engine”, Malaysian Technical



64. K.Kadirgama, M.M.Noor, Z.Ghazalli, M.R.M.Rejab, “Development of New

Software (Axiomatic-DFA) for Remanufacturing”, Malaysian Technical



65. K.Kadirgama, H.H.Habeeb, B.Mohamad, M.M.Noor, “Performance of

Advanced Cutting Tools When Machining of Nickel Based Alloys”,

Malaysian Technical Universities Conference and Exhibition on Engineering

and Technology (MUCEET09), 20~22 Jun, Ms Garden Hotel, Kuantan,

Malaysia, 2009.

30

66. M.Y.Taib, M.M.Noor, K.Kadirgama, M.M.Rahman, “Investigation of

Performance of Domestic Refrigerator in Malaysia using Experimental

Method”, Malaysian Technical Universities Conference and Exhibition on



67. T.T.Mon, M.M.Noor, Rosli A.Bakar, M.K. Hadi Che, “Prediction of Carbon

Dioxide Emission from Passenger Cars”, Malaysian Technical Universities



68. M.M.Noor, K.Kadirgama, R.Daud, M.M.Rahman, M.R.M.Rejab,

M.S.M.Sani, A.A.A.Rahman, “Optimize Parameter of Orthogonal and

Oblique Cutting Using Adaptive Network-Fuzzy Inference System”,

International Conference on Advance Mechanical Engineering (ICAME09),

22~25Jun, Concorde Hotel, Shah Alam, Selangor, 2009.

69. M.M.Noor, K.Kadirgama, M.M.Rahman, M.R.M.Rejab, M.S.M.Sani,

A.Sulaiman, Rosli A.Bakar, Abdullah Ibrahim, “An Experience of Outcome

Based Education in the Faculty of Mechanical Engineering, Universiti

Malaysia Pahang”, International Conference on Advance Mechanical

Engineering (ICAME09), 22~25Jun, Concorde Hotel, Shah Alam, Selangor,

2009.

70. W.S.W.Harun, K.Kadirgama, M.M.Noor, M.M.Rahman, “Effect of Volume

Fraction on Strength of Woven Composite”, International Conference on

Advance Mechanical Engineering (ICAME09), 22~25Jun, Concorde Hotel,

Shah Alam, Selangor, 2009.

71. M.M.Rahman, S.A.Kesulai, M.R.M.Rejab, M.S.M.Sani, K.Kadirgama,

M.M.Noor, “Fatigue Life Prediction of Lower Suspension Arm Using Strain-

Life Approach”, International Conference on Advance Mechanical

Engineering (ICAME09), 22~25Jun, Concorde Hotel, Shah Alam, Selangor,

2009.

72. M.M.Noor, T.T.Mon, K.Kadirgama, M.R.M.Rejab, M.S.M.Sani,

R.Rafizuan, W.A.W.Yusof, “Drilling on Fibre-Glass Composite Using CO2

Laser”, International Conference on Advance Mechanical Engineering

(ICAME09), 22~25Jun, Concorde Hotel, Shah Alam, Selangor, 2009.

73. K.Kadirgama, M.M.Noor, M.R.M.Rejab, M.M.Rahman, M.S.M.Sani,

T.T.Mon, “The Effect of End Milling Parameters on Surface Roughness

when Machining Corrosion Resistance Alloy”, International Conference on

Advance Mechanical Engineering (ICAME09), 22~25Jun, Concorde Hotel,

Shah Alam, Selangor, 2009.

74. M.R.M.Rejab, K.Kadirgama, M.M.Noor, M.S.M.Sani, M.M.Rahman,

A.Alias, “Composite Sandwich Panel Assessment under Static Loading”,

International Conference on Advance Mechanical Engineering (ICAME09),

22~25Jun, Concorde Hotel, Shah Alam, Selangor, 2009.

31

75. M.S.M.Sani, M.H.A. Rasid, M.R.M.Rejab, M.M.Noor, K.Kadirgama &

M.M.Rahman, “Experimental Study on Noise Source Identification of Split

Unit Air Conditioner System” International Conference on Advance

Mechanical Engineering (ICAME09), 22~25Jun, Concorde Hotel, Shah

Alam, Selangor, 2009.


Abdullah Ibrahim “Education Reform Model at Faculty of Mechanical

Engineering, Universiti Malaysia Pahang”, International Journal Conference

in Recent Trends in Mechanical Engineering, (IJCRTME09), 24~26 Apr,

Trivandrum, Kerala, India. 2009.

77. K.Kadirgama, M.M.Noor, M.S.M.Sani, Abdullah Adnan Mohamed, Rosli

A.Bakar, Abdullah Ibrahim, “The Effect of the Foundation Subject to the

Final Year Subject”, International Journal Conference in Recent Trends in

Mechanical Engineering, (IJCRTME09), 24~26 Apr, Trivandrum, Kerala,

India. 2009.

78. W.S.W.Harun, K.Kadirgama, M.M.Noor, “Prediction of Heat Affected Zone

by Statistical Method in Plasma Cutting Operation”, International

Conference of Composites Manufacturing 2009, (ICCM09), 29 Apr~1 May

Hilton San Diego Bayfront, San Diego CA USA, 2009.

79. M.M.Noor, K.Kadirgama, M.M.Rahman, M.Y.Taib, M.R.M.Rejab,

M.S.M.Sani, A.Sulaiman, Abdullah Ibrahim, Rosli A.Bakar, “The Effect of

Entry Qualifications and Gender towards Student Performance”,

International Engineering Education Conference (IEEC09), 16~18May,

Madinah, Kingdom of Saudi Arabia, 2009.

80. K.Kadirgama, M.M.Noor, M.S.M.Sani, M.M.Rahman, M.R.M.Rejab,

M.Y.Taib, A.Sulaiman, Abdullah Ibrahim, Rosli A.Bakar, “Development of

Genetic Algorithms and Multilayer Perceptron Neural Network (MPNN)

Model to Study the Student Performance in Thermodynamics”, International

Engineering Education Conference (IEEC09), 16~18May, Madinah,

Kingdom of Saudi Arabia, 2009.

81. M.R.M.Rejab, M.M.Noor, N.F.Hasan, M.Y.Taib, K.Kadirgama,

M.S.M.Sani, M.M.Rahman, “The Outcome Assessment of the Industrial

Training for Mechanical Engineering Students, Universiti Malaysia Pahang”,

International Engineering Education Conference (IEEC09), 16~18May,

Madinah, Kingdom of Saudi Arabia, 2009.

82. M.S.M.Sani, A.Senawi, M.M.Noor, M.M.Rahman, M.Y.Taib, A.Sulaiman,

K.Kadirgama, S.H.Tomadi, R.Daud, M.R.M.Rejab, “Quantitative

Assessment of Bachelor Mechanical Engineering Programs by Senior Exit

Surveys at Universiti Malaysia Pahang”, International Engineering Education

Conference (IEEC09), 16~18May, Madinah, Kingdom of Saudi Arabia,

2009.

32

83. M.M.Noor, K.Kadirgama, M.R.M.Rejab, M.M.Rahman, Rosli A. Bakar,

H.Ismail, “Artificial Intelligent Model to Predict Surface Roughness in Laser

Machining”, International Conference on Recent Advances in Materials,

Minerals & Environment (RAMM’09), 1~3 Jun, Bayview Beach Resort,

Batu Ferringhi, Penang, Malaysia, 2009.

84. K.Kadirgama, M.M.Noor, M.R.M.Rejab, K.A. Abou-El-Hossein, Rosli

A.Bakar, H.Ismail. “Effect of Tool Holder Angles on Cutting Force when

Machining Aerospace Material”, International Conference on Recent

Advances in Materials, Minerals & Environment (RAMM’09), 1~3 Jun,

Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia, 2009.

85. M.R.M.Rejab, M.M.Noor, K.Kadirgama, M.M.Rahman, A.Alias.

“Mechanical Properties on Hexagonal CFRP Composite on Compressive

Loading”, International Conference on Recent Advances in Materials,

Minerals & Environment (RAMM’09), 1~3 Jun, Bayview Beach Resort,

Batu Ferringhi, Penang, Malaysia, 2009.

86. M.M.Noor, M.A.Omar, I.Subuki, K.Kadirgama, “Effect of Palm Stearin

Content on the Properties of Injection Moulded 316L Stainless Steel

Powder”, 3rd International Conference on Sustainable Energy &

Environmental Protection (SEEP’09), 12-15 August, Dublin City University,

Dublin, Ireland, 2009.

87. K.Kadirgama, M.M.Noor, M.M.Rahman, K.A. Abou-El-Hossein,

H.H.Habeeb “Effect of Dry Cutting on Cutting Force and Tool Life When

Machining Aerospace Material”, 3rd International Conference on

Sustainable Energy & Environmental Protection (SEEP’09), 12-15 August,

Dublin City University, Dublin, Ireland, 2009.

88. M.S.M.Sani, M.R.M.Rejab, M.M.Noor, K.Kadirgama, M.M.Rahman,

I.I.A.Rahman, “Study on Stress and Modal Analysis of Automobile Tyre”,

International Conference on Applications and Design in Mechanical

Engineering (ICADME’09), 11-13 Oct, Universiti Malaysia Perlis, Kangar,

Malaysia, 2009.

89. M.R.M.Rejab, K.Kadirgama, M.M.Noor, M.M.Rahman, M.S.M.Sani,

A.Alias, “Development of Compressive-Shear Test Rig for Polymeric Foam

Material Behaviours”, International Conference on Applications and Design

in Mechanical Engineering (ICADME’09), 11-13 Oct, Universiti Malaysia

Perlis, Kangar, Malaysia, 2009.

90. M.M.Noor, K.Kadirgama, M.M.Rahman, A.K.M.Nurul Amin, B.S.Yilbas,

“Effect Of Thickness When Machining Of The Non-Metallic Composite

Using CO2 Laser”, International Conference on Advances Materials and

Processing Technologies (AMPT09), 19-21 October, Kuala Lumpur,

Malaysia, 2009.

91. M.M.Noor, K.Kadirgama, M.M.Rahman, M.R.M.Rejab, M.S.M.Sani,

M.A.Omar, “Optimization of Laser Cutting on Bone”, International

33

Conference on Advances Materials and Processing Technologies (AMPT09),

19-21 October, Kuala Lumpur, Malaysia, 2009.

92. K.Kadirgama, M.M.Noor, M.M.Rahman, M.R.M.Rejab, M.S.M.Sani,

C.H.C.Haron, “Chips Texture When Machining Aerospace Material”,

International Conference on Advances Materials and Processing

Technologies (AMPT09), 19-21 October, Kuala Lumpur, Malaysia, 2009.

93. K. Kadirgama, M.M.Noor, M.M.Rahman, Habeeb H.H., A.K.M.Nurul Amin

“Tool Life Prediction Model for Machining of Power Generation

Component”, International Conference on Advances Materials and

Processing Technologies (AMPT09), 19-21 October, Kuala Lumpur,

Malaysia, 2009.

94. M.M.Rahman, K.Kadirgama, M.M.Noor, M.R.M.Rejab, W.S.W.Harun,

“Minimal Quantity Lubrication on Machinability of AISI 9310 Steel: Effect

on Tool Wear and Surface Roughness”, International Conference on

Advances Materials and Processing Technologies (AMPT09), 19-21

October, Kuala Lumpur, Malaysia, 2009.

95. M.M.Rahman, M.R.M.Rejab, M.S.M.Sani, K.Kadirgama, M.M.Noor,

“Effects of Minimal Quantity Lubricant on Cutting Temperature and Chip

Formation for Cutting Performance of AISI 9310 Alloy Steel”, International

Conference on Advances Materials and Processing Technologies (AMPT09),

19-21 October, Kuala Lumpur, Malaysia, 2009.

96. K.Kadirgama, M.M.Noor, Z.Ghazalli, M.M.Rahman, M.S.M.Sani,

M.R.M.Rejab, “Software Development of Assembly Sequence Approach by

using Integrated TRIZ, Axiomatic Design and Boothroyd-Dewhurst DFA”,

International Conference on Software Engineering and Computer Systems

(ICSECS '09), 19~21Oct, Swiss Garden Resort, Kuantan, 2009.

97. W.S.W.Harun, A.H.Ahmad, M.M.Noor, K.Kadirgama, S.Sharif, M.H.Idris,

“Evaluation of ABS Patterns Produced from FDM for Investment Casting

Process” Waset Conference, UK, 2009.

98. M.M.Noor, K.Kadirgama, M.M.Rahman, Z.Ghazalli, S.H.Tomadi, “Pattern

Recognition Method to Predict Recycling Strategy for Electronic

Equipments”, International Conference on Computer, Electrical, and

Systems Science, and Engineering, (CESSE 2009), 25-27 Nov, Bali,

Indonesia, 2009.

99. K.Kadirgama, M.M.Noor, Z.Ghazalli, W.S.W.Harun, M.R.M.Rejab,

“Prediction of Recycle Method by Relevance Vector Machine (RVM)”,

International Conference on Computer, Electrical, and Systems Science, and

Engineering, (CESSE 2009), 25-27 Nov, Bali, Indonesia, 2009.

34

22. Book in Chapter


Abdullah Ibrahim “The Implementation of OBE at Faculty of Mechanical

Engineering, Universiti Malaysia Pahang”, 'Selected Papers in University

Teaching and Learning', UiTM Shah Alam, Selangor, 2009.

2. K.Kadirgama, M.M.Noor, M.M.Rahman, M.S.M.Sani, Rosli A.Bakar,

Abdullah Ibrahim, “Development of Artificial Intelligent and Statistical

Model to Study the Importance of Pre-Requisite for Heat Transfer”, 'Selected

Papers in University Teaching and Learning', UiTM Shah Alam, Selangor,

2009.

3. K.Kadirgama, M.M.Noor, M.M.Rahman, M.S.M.Sani, Rosli A.Bakar, K. A.

Abou-El-Hossein, “Prediction Modelling of Power and Torque in End-

Milling”, Machining Recent Advancement, Algarve, Portugal, 2009.

4. Advances in Natural Gas Technology, Chapter title: Application of Natural

Gas for Internal Combustion Engines, ISBN 978-953-51-0507-7, 2013,

InTech publication

5. Finite Element Analysis - From Biomedical Applications to Industrial

Developments, Chapter title: Modelling of Residual Stresses, ISBN 978-953-

51-0474-2,2013, InTech publication

23. List of Book

CNC machining for beginner, UMP Press, 2012

Quality Engineering – Six Sigma Approach, Under UMP Press, 2015

REFEREE

Assoc.Prof.Dr.Rizalman Mamat

University Malaysia Pahang,

Dean Of faculty of Mechanical Engineering

Tun Razak Highway,

26300 Kuantan,Pahang

[email protected]

Prof.Dato.Dr.Rosli Abu Bakar

University Malaysia Pahang

Tun Razak Highway,

26300 Kuantan,Pahang

[email protected]

mailto:[email protected]

curriculum vitae - aerg.ump.edu.my€¦ · university learning and teaching (incult’08),...

Documents