current date 21nov2014 313 skid steer - dms · current date 21nov2014 313 skid steer equipment for...

87
Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions 4 Cylinder Turbo-Charged 49 Gross H.P. 45 Net H.P. Dual Element Air Cleaner Automatic Fan Belt Tensioner John Deere "Cool Gard II" Extended Life Anti-Freeze Solution to -34F John Deere Plus 50 10w30 Engine Oil 5 Micron Primary Fuel Filter 17.5 Gallon (66 L) Fuel Tank Final Drive System and Brake: Manual Hydrostatic Pumps Four Wheel Drive Four 80 HZ Endless Chain 10w30 Engine Oil Integral Automatic Wet-Disk Brake Spring Applied Hydraulic Release Gauges and Instruments: Fuel Gauge Engine Coolant Temperature Gauge Operator Selectable LCD Digital Readout: Hourmeter Engine RPM Battery Voltage Engine Coolant Temp. Indicator Warning Lights: Battery Not Charging Hydraulics Locked Out Stop Park Brake Illumination Hydraulic Oil Over Temp. Air Filter Restriction Hydraulic Oil Filter Restriction Seat Belt Switch Seat Switch Door Open Switch Engine Preheat Low Engine Oil Pressure Automatic Engine Preheat Automatic Engine Shutdown with Alarm Electrical: 12-Volt Electrical Battery 750 cca Alternator 70 Amp Halogen Work Lights, Two Front and One Rear Hydraulics: 3-Spool Open Center Valve 15 gpm (57 lpm) Pump 3 Micron Hydraulic Filter 10w30 Engine Oil John Deere Boom and Bucket Cylinders with Cushioned Boom Cylinders Auxiliary Hydraulics with Flat Faced Couplers Loader Arm, Bucket, & Auxiliary Hydraulic Lockout System Auxiliary Hydraulics Lockout Override Performance Characteristics: Rated Operating Capacity - 1260 lb. (572 kg) Tipping Load - 2525 lb. (1146 kg) Bucket Breakout Force - 3300 lb. (1498 kg) Boom Breakout Force - 2800 lbs. (1271 kg) Axle Torque - 3420 lbs-ft (4651 Nm) Machine Width - 59 in. (1.5m) Quik-Tatch Mounting Operator Protection/Comfort: FOPS / ROPS Roll-Guard Canopy with Side Screens Headliner Interior Dome Lighting 12 Volt Receptacle Beverage Holder Cell Phone Cargo Net Storage In-Cab Boom Lockout System Retractable Seat Belt Operator Presence System (Seat Switch & Seat Belt Interlocks with Brake, Loader Arm, Bucket, & Auxiliary Circuits) Two Full Length Grab Handles for Easy Entry / Exit Rear Cab Window Water Shedding Deluxe Vinyl Seat Ergonomic and Adjustable Armrests Adjustable Pedal Foot Controls Convenient Tie Downs Tires: Four 10x16.5 8 PR SKS Extra-Wall Heavy Duty Tires Warranty (US and Canada): John Deere Standard Page 1 of 9 11/21/2014 https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Upload: others

Post on 11-Mar-2020

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Current Date 21Nov2014

313 SKID STEER

Equipment for Base MachineEngine:John Deere PowerTech E2.4L certified to IT4 / StageIIIB emissions 4 Cylinder Turbo-Charged 49 Gross H.P. 45 Net H.P. Dual Element Air Cleaner Automatic Fan Belt Tensioner John Deere "Cool Gard II" Extended Life Anti-Freeze Solution to -34F John Deere Plus 50 10w30 Engine Oil 5 Micron Primary Fuel Filter 17.5 Gallon (66 L) FuelTankFinal Drive System andBrake: Manual Hydrostatic Pumps Four Wheel Drive Four 80 HZ Endless Chain 10w30 Engine Oil Integral Automatic Wet-Disk

Brake Spring Applied Hydraulic ReleaseGauges and Instruments: Fuel Gauge Engine Coolant Temperature Gauge Operator Selectable LCD Digital Readout: Hourmeter Engine RPM Battery Voltage Engine Coolant Temp. Indicator Warning Lights: Battery Not Charging Hydraulics Locked Out Stop Park Brake Illumination

Hydraulic Oil Over Temp. Air Filter Restriction Hydraulic Oil Filter Restriction Seat Belt Switch Seat Switch Door Open Switch Engine Preheat Low Engine Oil Pressure Automatic Engine Preheat Automatic Engine Shutdown with Alarm

Electrical: 12-Volt Electrical Battery 750 cca Alternator 70 Amp Halogen Work Lights, Two Front and One RearHydraulics: 3-Spool Open Center Valve 15 gpm (57 lpm) Pump 3 Micron Hydraulic Filter 10w30 Engine Oil John Deere Boom andBucket Cylinders with Cushioned Boom Cylinders Auxiliary Hydraulics with Flat Faced Couplers Loader Arm, Bucket, & Auxiliary Hydraulic Lockout System Auxiliary Hydraulics Lockout OverridePerformance Characteristics: Rated Operating Capacity - 1260 lb. (572 kg) Tipping Load - 2525 lb. (1146 kg) Bucket Breakout Force - 3300 lb. (1498 kg)

Boom Breakout Force - 2800 lbs. (1271 kg) Axle Torque - 3420 lbs-ft (4651 Nm) Machine Width - 59 in. (1.5m) Quik-Tatch Mounting

OperatorProtection/Comfort: FOPS / ROPS Roll-Guard Canopy with Side Screens Headliner Interior Dome Lighting 12 Volt Receptacle Beverage Holder Cell Phone Cargo Net Storage In-Cab Boom LockoutSystem Retractable Seat Belt Operator Presence System (Seat Switch & Seat Belt Interlocks with Brake, Loader Arm, Bucket, & Auxiliary Circuits) Two Full Length Grab Handles for Easy Entry / Exit Rear Cab Window Water Shedding Deluxe Vinyl Seat Ergonomic and Adjustable Armrests Adjustable Pedal Foot Controls Convenient Tie Downs

Tires: Four 10x16.5 8 PR SKS Extra-Wall Heavy Duty Tires

Warranty (US and Canada): John Deere Standard

Page 1 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 2: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Warranty 1 Year Unlimited Hours

Required - You must select one from each categoryBASE MACHINE

F.O.B. Dubuque, Iowa

Description Code Price313 SKID STEER 1590T $27,877.00

SKID STEER VALUE PACKAGES

PRICE LISTED IS A 10% DISCOUNT FOR THE COMPLETE VALUE PACKAGE. (Each option's price will be listed on the sameline as that option.)

Description Code PriceVP01

Package includes:* Foot Controls (0900)* Tires 10 X 16.5 8 PR SKS Extra-Wall HD (2280)* Standard Hydraulics (3000)* 3" Seat Belt (4002)* Manual Quik-Tatch (5002)* Canopy - ROPS / FOPS (5200)* Seat (Vinyl) (6000)* Less Horn (6801)* Less Severe-Duty Fuel Filtration System (7210)* 60" Dirt Bucket (14.3 cu.ft.) with Edge (9021)

0801 ($74.00)

VP02

Package includes:* Foot Controls (0900)* 10x16.5 8 PR SKS Hauler Heavy Duty (2270)* Standard Hydraulics (3000)* 3" Seat Belt (4002)* Manual Quik-Tatch (5002)* Canopy - ROPS / FOPS (5200)* Seat (Vinyl) (6000)* Less Horn (6801)* Less Severe-Duty Fuel Filtration System (7210)* Backup Alarm (8040)* 60" Dirt Bucket (14.3 cu.ft.) with Edge (9021

0802 ($107.00)

VP03

Package includes:* Foot Controls (0900)* 10x16.5 8 PR SKS Hauler Heavy Duty (2270)* Standard Hydraulics (3000)* 3" Seat Belt (4002)* Power Quik-Tatch (5003)* Canopy - ROPS / FOPS (5200)* Seat (Vinyl) (6000)* Less Horn (6801)* Less Severe-Duty Fuel Filtration System (7210)* Backup Alarm (8040)* Rear Counterweight (8131)* 60" Dirt Bucket (14.3 cu.ft.) with Edge (9021)

0803 ($222.00)

VP04 0804 ($439.00)

Page 2 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 3: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Package includes:* Foot Controls (0900)* 10x16.5 8 PR SKS Hauler Heavy Duty (2270)* Standard Hydraulics (3000)* 3-Inch Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5003)* Cab Enclosure with Heat and Defrost (5202)* Seat (Vinyl) (6000)* Less Horn (6801)* Less Severe-Duty Filtration System (7210)* Block Heater Kit (8050)* 60" Dirt Bucket (14.3 cu.ft.) with Edge (9021

VP05

Package includes:* Foot Controls (0900)* 10x16.5 8 PR SKS Hauler Heavy Duty (2270)* Standard Hydraulics and Hydraulic Self-Leveling (3001)* 3-Inch Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5003)* Cab Enclosure with Heat and Defrost (5202)* Mechanical Suspension Seat (Vinyl) (6001)* Horn (6800)* Less Severe-Duty Filtration System (7210)* Backup Alarm (8040)* Block Heater Kit (8050)* Rear Counterweight (8131)* 60" Dirt Bucket (14.3 cu.ft.) with Edge (9021)

0805 ($593.00)

313 Standard Skid Steer

Includes standard equipment

0800 In Base Price

CONTROLS

Description Code PriceFoot Controls 0900 In Base Price

Hands Only Controls 0925 $796.00

WHEELS AND TIRES

Description Code Price10x16.5 8 PR SKS Extra-Wall Heavy Duty

For use primarily in dirt applicationsGives 59.0 in. Skid Steer width at narrow settingGives 65.5 in. Skid Steer width at wide setting

2280 In Base Price

10x16.5 8 PR SKS Hauler Heavy Duty

Gives 59.3 in. Skid Steer width at narrow settingGives 65.3 in. Skid Steer width at wide setting

2270 $229.00

10x16.5 8 PR Galaxy "Beefy Baby II" HD

Gives 58.5 in. Skid Steer width at narrow settingGives 64.5 in. Skid Steer width at wide setting

2040 $365.00

7x15 Solideal 6 PR SKS Classic

Gives 55.7 in. Skid Steer width at narrow settingGives 64.6 in. Skid Steer width at wide setting

2030 ($108.00)

10x16.5 Treaded Brawler SolidFlex 2400 $2,636.00

Page 3 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 4: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Gives 63.5 in. Skid Steer width at wide settingNot compatible with Tracks

HYDRAULIC OPTIONS

Description Code PriceStandard Hydraulics 3000 In Base Price

Standard Hydraulics and Hydraulic Self-Leveling 3001 $569.00

SEAT BELTS

Description Code Price2-Inch Seat Belt

For use with Canopy - ROPS / FOPS (5200)

4000 In Base Price

2-Inch Seat Belt with Shoulder Harness

For use with Canopy - ROPS / FOPS with Demolition Door (5201) and CabEnclosure with Heat and Defrost (5202)

4001 $210.00

3-Inch Seat Belt

Required in British Columbia and California; construction industry safety orders useof 3 inch wide webbing seat beltFor use with Canopy - ROPS / FOPS (5200)

4002 $162.00

3-Inch Seat Belt with Shoulder Harness

Required in British Columbia and California; construction industry safety orders useof 3 inch wide webbing seat beltFor use with For use with Canopy - ROPS / FOPS with Demolition Door (5201) andCab Enclosure with Heat and Defrost (5202)

4003 $375.00

QUIK-TATCH

Description Code PriceManual Quik-Tatch 5002 In Base Price

Power Quik-Tatch 5003 $826.00

OPERATOR STATION

Description Code PriceCanopy - ROPS / FOPS 5200 In Base Price

Canopy - ROPS / FOPS with Demolition Door

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003)

5201 $1,255.00

Cab Enclosure with Heat and Defrost (NO A/C)

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003)

5202 $2,287.00

Cab Enclosure with Demolition Door, Heat, and Defrost 5203 $2,753.00

SEAT

Page 4 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 5: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Description Code PriceSeat (Vinyl) 6000 ($413.00)

Mechanical Suspension Seat (Vinyl) 6001 In Base Price

HORN

Description Code PriceHorn 6800 $139.00

Less Horn 6801 In Base Price

SEVERE-DUTY FUEL FILTRATION

Description Code PriceSevere-Duty Fuel Filtration System 7200 $370.00

Less Severe-Duty Fuel Filtration System 7210 In Base Price

Optional - Select as desiredKITS AND ACCESSORIES - FACTORY INSTALLED

Description Code PriceBackup Alarm 8040 $104.00

Battery, Heavy Duty, 925cca 8045 $54.00

Block Heater Kit 8050 $95.00

Hazard Warning Lights 8075 $157.00

Heater / Defroster Kit 8110 $807.00

Rear Counterweight

Includes 2-100 lb. weights and the mounting hardware

8131 $315.00

Low Noise Package 8172 $470.00

Top Window 8220 $105.00

Machine Security Activation 8320 $79.00

Mirror, Boom-Mounted 8355 $85.00

Rear View Mirror (Interior cab mount) 8350 $89.00

BUCKETS:

See Attachments for Multi-Purpose Buckets

Description Code Price56 in. Dirt Bucket (12.3 cu. ft.) 9010 $757.00

56 in. Dirt Bucket (12.3 cu. ft.) with Edge 9011 $948.00

Page 5 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 6: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

60 in. Dirt Bucket (14.3 cu. ft.) 9020 $801.00

60 in. Dirt Bucket (14.3 cu. ft.) with Edge 9021 $992.00

60 in. Dirt Bucket (14.3 cu. ft.) with Teeth 9190 $1,060.00

66 in. Construction Bucket (16.2 cu. ft.) 9031 $987.00

66 in. Construction Bucket (16.2 cu. ft.) with Edge 9032 $1,128.00

66 in. Dirt Bucket (14.5 cu. ft.) 9033 $861.00

66 in. Dirt Bucket (14.5 cu. ft.) with Edge 9034 $1,071.00

66 in. Dirt Bucket with Teeth (14.5 cu. ft.) 9035 $1,038.00

66 in. Tooth Bucket (16.2 cu. ft.) 9200 $1,088.00

66 in. Utility Bucket (20.6 cu. ft.) 9310 $953.00

66 in. Utility Bucket (20.6 cu. ft.) with Edge 9311 $1,117.00

EXPORT CODES

Description Code PriceAustralian Compliance Certificate and Hearing ProtectionCaution Label

9280 No Charge

French Canadian Operator's Manual and Decals 9260 No Charge

Spanish Operator's Manual and Decals 9240 No Charge

Russian Operator's Manual and Decals 9270 No Charge

SPECIAL EQUIPMENT - ORDER AS DESIRED

Description Code Price

DEALER-INSTALLED KITS

Description Code Price7x15 Solideal SKS Classic AT332904 $293.00

BUCKETS:See Attachments for Multi-Purpose Buckets

66 in. Construction Bucket (16.2 cu. ft.) KV11630 $987.00

66 in. Dirt Bucket (14.5 cu. ft.) AT354876 $861.00

66 in. Dirt Bucket (14.5 cu. ft.) with Edge AT354874 $1,071.00

66 in. Dirt Bucket with Teeth (14.5 cu. ft.) AT354880 $1,038.00

66 in. Tooth Bucket (16.2 cu. ft.) KV12311 $1,088.00

66 in. Utility Bucket (20.6 cu. ft.) with Edge KV24755 $1,117.00

Page 6 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 7: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Buckets:

56 in. Dirt Bucket (12.3 cu. ft.) AT332287 $757.00

56 in. Dirt Bucket (12.3 cu. ft.) with Edge AT332288 $948.00

60 in. Dirt Bucket (14.3 cu. ft.) AT331803 $801.00

60 in. Dirt Bucket (14.3 cu. ft.) with Edge AT333697 $992.00

60 in. Dirt Bucket (14.3 cu. ft.) with Teeth AT336694 $1,060.00

66 in. Construction Bucket (16.2 cu. ft.) with Edge KV24751 $1,128.00

66 in. Foundry Bucket (14.6 cu. ft.) KV11636 $876.00

66 in. Utility Bucket (20.6 cu. ft.) KV22801 $953.00

Cutting Edges:

56 in. Bolt-On Cutting Edge

Requires Five Grade 8 Plow Bolts and Nuts (PB750225)

T225190 View Price

60 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

KV17819 View Price

Kits and Accessories:

12 Volt Demonstration Kit

3-pin connector

KV21995 $300.00

12 Volt Receptacle Kit AT332454 $200.00

2-inch Seat Belt with Shoulder Harness for StandardSeat

AT364722 $305.00

2-inch Seat Belt with Shoulder Harness forSuspension Seat

AT312692 $305.00

3-inch Seat Belt with Shoulder Harness for StandardSeat

AT364826 $462.00

3-inch Seat Belt with Shoulder Harness forSuspension Seat

AT316210 $462.00

Backup Alarm AT332459 $182.00

Block Heater Kit AT350243 $70.00

Bobcat Attachment Harness Adapter Kit

Must have the 14 pin attachment connector already installed

AT417736 $339.00

Bucket Offset Adapter

Lowers bucket approximately 2 inches.

AT351259 $561.00

Cab Enclosure

Requires Shoulder Belt, AT312692 or AT316210

AT425248 $1,450.00

Page 7 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 8: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Includes Wiper Control Harness

Deluxe Wire Harness AT332451 $585.00

Demolition Door Kit

2- or 3-inch Seat Belt with Shoulder Harness required.

AT425249 $900.00

Diesel Fuel Fired Coolant Heater Kit AT366382 $2,682.00

Hazard Warning Lights KV25449 $175.00

Heater / Defroster Kit

* Recommend Cab Enclosure (AT368402)* Requires Deluxe Wire Harness, AT332451

AT332378 $842.00

Horn AT332457 $116.00

Radio

Radio ONLY. Refer to bulletin 08SS04 for mounting kit, speakers, andantennas.

SWJHD905 View Price

Rear Counterweight

Includes 2-100 lb. weights and mounting hardware.

AT393242 $274.00

Rear View Mirror Kit KV11791 $32.00

SMV Sign KV26958 $74.00

Side Window Kit AT332384 $512.00

Single Point Lift System AT329802 $696.00

Top Window Kit KV11776 $87.00

Vinyl Cab Enclosure AT332380 $293.00

Warning Beacon KV25448 $212.00

Miscellaneous:

66 in. Bolt-On Cutting Edge

Requires Seven Grade 8 Plow Bolts and Nuts (PB750225)

U16748 View Price

Tooth Bars:

56 in. Tooth Bar - 6 Teeth AT337951 $438.00

60 in. Tooth Bar - 7 Teeth KV12292 $445.00

66 in. Tooth Bar - 7 Teeth KV12294 $463.00

66 in. Tooth Bar for BOCE - 6 Teeth AT347126 $703.00

Wheels and Tires, Single (Left Hand Only):

10x16.5 Treaded GPX Brawler SolidFlex, Left SW10165527L View Price

Page 8 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 9: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Wheels and Tires, Single (Right Hand Only):

10x16.5 8 PR Galaxy "Beefy Baby II" HD AT336800 $366.00

10x16.5 8 PR SKS Extra-Wall Heavy Duty AT332906 $317.00

10x16.5 Treaded GPX Brawler SolidFlex, Right SW10165527R View Price

Copyright © 1996-2014 Deere & Company. All Rights Reserved. About Our Site | Privacy and Data | Legal | |

Page 9 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 10: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Current Date 21Nov2014

315 SKID STEER

Engine:John Deere PowerTech E2.4L certified to IT4 / StageIIIB emissions 49 Gross H.P. 45 Net H.P. Dual Element Air Cleaner Automatic Fan Belt Tensioner John Deere "Cool Gard II" Extended Life Anti-Freeze Solution to -34F John Deere Plus 50 10w30 Engine Oil 5 Micron Primary Fuel Filter 17.5 Gallon (66 L) FuelTank

Final Drive System andBrake: Manual Hydrostatic Pumps Four Wheel Drive Four 80 HZ Endless Chain 10w30 Engine Oil Integral Automatic Wet-Disk

Brake Spring Applied Hydraulic Release

Gauges and Instruments: Fuel Gauge Engine Coolant Temperature Gauge Operator Selectable LCD Digital Readout: Hourmeter Engine RPM Battery Voltage Engine Coolant Temp. Indicator Warning Lights: Battery Not Charging Hydraulics Locked Out Stop Park Brake Illumination Hydraulic Oil Over Temp.

Air Filter Restriction Hydraulic Oil Filter Restriction Seat Belt Switch Seat Switch Door Open Switch Engine Preheat Low Engine Oil Pressure Automatic Engine Preheat Automatic Engine Shutdown with Alarm

Electrical: 12-Volt Electrical Battery 750 cca Alternator 70 Amp Halogen Work Lights, Two Front and One RearHydraulics: 3-Spool Open Center Valve 16 gpm (61 lpm) Pump 3 Micron Hydraulic Filter 10w30 Engine Oil John Deere Boom andBucket Cylinders with Cushioned Boom Cylinders Auxiliary Hydraulics with Flat Faced Couplers Loader Arm, Bucket, & Auxiliary Hydraulic Lockout System Auxiliary Hydraulics Lockout Override

Performance Characteristics: Rated Operating Capacity - 1500 lb. (681 kg) Tipping Load - 3000 lb. (1361 kg) Bucket Breakout Force - 3300 lb. (1498 kg) Boom Breakout Force -

3900 lbs. (1771 kg) Axle Torque - 4050 lbs-ft (5508 Nm) Machine Width - 59 in. (1.5m) Quik-Tatch Mounting

OperatorProtection/Comfort: FOPS / ROPS Roll-Guard Canopy with Side Screens Headliner Interior Dome Lighting 12 Volt Receptacle Beverage Holder Cell Phone Cargo Net Storage In-Cab Boom LockoutSystem Retractable Seat Belt Operator Presence System (Seat Switch & Seat Belt Interlocks with Brake, Loader Arm, Bucket, & Auxiliary Circuits) Two Full Length Grab Handles for Easy Entry / Exit Rear Cab Window Water Shedding Deluxe Vinyl Seat Ergonomic and Adjustable Armrests Adjustable Pedal Foot Controls Convenient Tie Downs

Tires: Four 10x16.5 8 PR SKS Extra-Wall Heavy Duty Tires

Warranty (US and Canada): John Deere StandardWarranty

Page 1 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 11: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

1 Year Unlimited Hours

Required - You must select one from each categoryBASE MACHINE

F.O.B. Dubuque, Iowa

Description Code Price315 SKID STEER 1600T $30,051.00

SKID STEER VALUE PACKAGES

PRICE LISTED IS A 10% DISCOUNT FOR THE COMPLETE VALUE PACKAGE. (Each option's price will be listed on the sameline as that option.)

Description Code PriceVP01

Package includes:* Foot Controls (0900)* Tires 10 X 16.5 8 PR SKS Extra-Wall HD (2280)* Standard Hydraulics (3000)* 3" Seat Belt (4002)* Manual Quik-Tatch (5002)* Canopy - ROPS / FOPS (5200)* Seat (Vinyl) (6000)* Less Horn (6801)* Less Severe-Duty Fuel Filtration System (7210)* 60" Dirt Bucket (14.3 cu.ft.) with Edge (9021)

0801 ($74.00)

VP02

Package includes:* Foot Controls (0900)* 10x16.5 8 PR SKS Hauler Heavy Duty (2270)* Standard Hydraulics (3000)* 3" Seat Belt (4002)* Manual Quik-Tatch (5002)* Canopy - ROPS / FOPS (5200)* Seat (Vinyl) (6000)* Less Horn (6801)* Less Severe-Duty Fuel Filtration System (7210)* Backup Alarm (8040)* 60" Dirt Bucket (14.3 cu.ft.) with Edge (9021)

0802 ($107.00)

VP03

Package includes:* Foot Controls (0900)* 10x16.5 8 PR SKS Hauler Heavy Duty (2270)* Standard Hydraulics (3000)* 3" Seat Belt (4002)* Power Quik-Tatch (5003)* Canopy - ROPS / FOPS (5200)* Seat (Vinyl) (6000)* Less Horn (6801)* Less Severe-Duty Fuel Filtration System (7210)* Backup Alarm (8040)* Rear Counterweight (8131)* 60" Dirt Bucket (14.3 cu.ft.) with Edge (9021)

0803 ($222.00)

VP04

Package includes:

0804 ($439.00)

Page 2 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 12: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

* Foot Controls (0900)* 10x16.5 8 PR SKS Hauler Heavy Duty (2270)* Standard Hydraulics (3000)* 3-Inch Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5003)* Cab Enclosure with Heat and Defrost (5202)* Seat (Vinyl) (6000)* Less Horn (6801)* Less Severe-Duty Fuel Filtration System (7210)* Block Heater Kit (8050)* 60" Dirt Bucket (14.3 cu.ft.) with Edge (9021)

VP05

Package includes:* Foot Controls (0900)* 10x16.5 8 PR SKS Hauler Heavy Duty (2270)* Standard Hydraulics and Hydraulic Self-Leveling (3001)* 3-Inch Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5003)* Cab Enclosure with Heat and Defrost (5202)* Mechanical Suspension Seat (Vinyl) (6001)* Horn (6800)* Less Severe-Duty Fuel Filtration System (7210)* Backup Alarm (8040)* Block Heater Kit (8050)* Rear Counterweight (8131)* 60" Dirt Bucket (14.3 cu.ft.) with Edge (9021)

0805 ($593.00)

315 Standard Skid Steer

Includes standard equipment

0800 In Base Price

CONTROLS

Description Code PriceFoot Controls 0900 In Base Price

Hands Only Controls 0925 $796.00

WHEELS AND TIRES

Description Code Price10x16.5 8 PR SKS Extra-Wall Heavy Duty

For use primarily in dirt applicationsGives 59.0 in. Skid Steer width at narrow settingGives 65.5 in. Skid Steer width at wide setting

2280 In Base Price

10x16.5 8 PR SKS Hauler Heavy Duty

Gives 59.3 in. Skid Steer width at narrow settingGives 65.3 in. Skid Steer width at wide setting

2270 $229.00

10x16.5 8 PR Galaxy "Beefy Baby II" HD

Gives 58.5 in. Skid Steer width at narrow settingGives 64.5 in. Skid Steer width at wide setting

2040 $365.00

7x15 Solideal 6 PR SKS Classic

Gives 55.7 in. Skid Steer width at narrow settingGives 64.6 in. Skid Steer width at wide setting

2030 ($108.00)

10x16.5 Treaded Brawler SolidFlex

Gives 63.5 in. Skid Steer width at wide setting

2400 $2,636.00

Page 3 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 13: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Not compatible with Tracks

HYDRAULIC OPTIONS

Description Code PriceStandard Hydraulics 3000 In Base Price

Standard Hydraulics and Hydraulic Self-Leveling 3001 $569.00

High Flow Hydraulics

Total 25 gpm with High FlowIncludes Deluxe Wire Harness

3002 $1,812.00

High Flow Hydraulics and Hydraulic Self-Leveling

Includes Deluxe Wire Harness

3003 $2,384.00

SEAT BELTS

Description Code Price2-Inch Seat Belt

For use with Canopy - ROPS / FOPS (5200)

4000 In Base Price

2-Inch Seat Belt with Shoulder Harness

For use with Canopy - ROPS / FOPS with Demolition Door (5201) and CabEnclosure with Heat and Defrost (5202)

4001 $210.00

3-Inch Seat Belt

Required in British Columbia and California; construction industry safety orders useof 3 inch wide webbing seat beltFor use with Canopy - ROPS / FOPS (5200)

4002 $162.00

3-Inch Seat Belt with Shoulder Harness

Required in British Columbia and California; construction industry safety orders useof 3 inch wide webbing seat beltFor use with For use with Canopy - ROPS / FOPS with Demolition Door (5201) andCab Enclosure with Heat and Defrost (5202)

4003 $375.00

QUIK-TATCH

Description Code PriceManual Quik-Tatch 5002 In Base Price

Power Quik-Tatch 5003 $826.00

OPERATOR STATION

Description Code PriceCanopy - ROPS / FOPS 5200 In Base Price

Canopy - ROPS / FOPS with Demolition Door

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003)

5201 $1,255.00

Cab Enclosure with Heat and Defrost (NO A/C) 5202 $2,287.00

Page 4 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 14: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003)

Cab Enclosure with Demolition Door, Heat, and Defrost 5203 $2,753.00

SEAT

Description Code PriceSeat (Vinyl) 6000 ($413.00)

Mechanical Suspension Seat (Vinyl) 6001 In Base Price

HORN

Description Code PriceHorn 6800 $139.00

Less Horn 6801 In Base Price

SEVERE-DUTY FUEL FILTRATION

Description Code PriceSevere-Duty Fuel Filtration System 7200 $370.00

Less Severe-Duty Fuel Filtration System 7210 In Base Price

Optional - Select as desiredKITS AND ACCESSORIES - FACTORY INSTALLED

Description Code PriceBackup Alarm 8040 $104.00

Battery, Heavy Duty, 925cca 8045 $54.00

Block Heater Kit 8050 $95.00

Hazard Warning Lights 8075 $157.00

Heater / Defroster Kit 8110 $807.00

Rear Counterweight

Includes 2-100 lb. weights and the mounting hardware

8131 $315.00

Low Noise Package 8172 $470.00

Top Window 8220 $105.00

Machine Security Activation 8320 $79.00

BUCKETS:

See Attachments for Multi-Purpose Buckets

Description Code Price56 in. Dirt Bucket (12.3 cu. ft.) 9010 $757.00

Page 5 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 15: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

56 in. Dirt Bucket (12.3 cu. ft.) with Edge 9011 $948.00

60 in. Dirt Bucket (14.3 cu. ft.) 9020 $801.00

60 in. Dirt Bucket (14.3 cu. ft.) with Edge 9021 $992.00

60 in. Dirt Bucket (14.3 cu. ft.) with Teeth 9190 $1,060.00

66 in. Construction Bucket (16.2 cu. ft.) 9031 $987.00

66 in. Construction Bucket (16.2 cu. ft.) with Edge 9032 $1,128.00

66 in. Dirt Bucket (14.5 cu. ft.) 9033 $861.00

66 in. Dirt Bucket (14.5 cu. ft.) with Edge 9034 $1,071.00

66 in. Dirt Bucket with Teeth (14.5 cu. ft.) 9035 $1,038.00

66 in. Tooth Bucket (16.2 cu. ft.) 9200 $1,088.00

66 in. Utility Bucket (20.6 cu. ft.) 9310 $953.00

66 in. Utility Bucket (20.6 cu. ft.) with Edge 9311 $1,117.00

EXPORT CODES

Description Code PriceAustralian Compliance Certificate and Hearing ProtectionCaution Label

9280 No Charge

French Canadian Operator's Manual and Decals 9260 No Charge

Spanish Operator's Manual and Decals 9240 No Charge

SPECIAL EQUIPMENT - ORDER AS DESIRED

Description Code PriceRust Preventative

Coating protects exposed unpainted surfaces from road salt during shipment.Applied at PSL.Not for use with export shipments as export pricing includes rust prevention.

9909 $158.00

DEALER-INSTALLED KITS

Description Code Price7x15 Solideal SKS Classic AT332904 $293.00

BUCKETS:See Attachments for Multi-Purpose Buckets

66 in. Construction Bucket (16.2 cu. ft.) KV11630 $987.00

66 in. Dirt Bucket (14.5 cu. ft.) AT354876 $861.00

66 in. Dirt Bucket (14.5 cu. ft.) with Edge AT354874 $1,071.00

66 in. Dirt Bucket with Teeth (14.5 cu. ft.) AT354880 $1,038.00

Page 6 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 16: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

66 in. Tooth Bucket (16.2 cu. ft.) KV12311 $1,088.00

66 in. Utility Bucket (20.6 cu. ft.) with Edge KV24755 $1,117.00

Buckets:

56 in. Dirt Bucket (12.3 cu. ft.) AT332287 $757.00

56 in. Dirt Bucket (12.3 cu. ft.) with Edge AT332288 $948.00

60 in. Dirt Bucket (14.3 cu. ft.) AT331803 $801.00

60 in. Dirt Bucket (14.3 cu. ft.) with Edge AT333697 $992.00

60 in. Dirt Bucket (14.3 cu. ft.) with Teeth AT336694 $1,060.00

66 in. Construction Bucket (16.2 cu. ft.) with Edge KV24751 $1,128.00

66 in. Foundry Bucket (14.6 cu. ft.) KV11636 $876.00

66 in. Utility Bucket (20.6 cu. ft.) KV22801 $953.00

Cutting Edges:

56 in. Bolt-On Cutting Edge

Requires Five Grade 8 Plow Bolts and Nuts (PB750225)

T225190 View Price

60 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

KV17819 View Price

Kits and Accessories:

12 Volt Demonstration Kit

3-pin connector

KV21995 $300.00

12 Volt Receptacle Kit AT332454 $200.00

2-inch Seat Belt with Shoulder Harness for StandardSeat

AT364722 $305.00

2-inch Seat Belt with Shoulder Harness forSuspension Seat

AT312692 $305.00

3-inch Seat Belt with Shoulder Harness for StandardSeat

AT364826 $462.00

3-inch Seat Belt with Shoulder Harness forSuspension Seat

AT316210 $462.00

Backup Alarm AT332459 $182.00

Block Heater Kit AT350243 $70.00

Bobcat Attachment Harness Adapter Kit

Must have the 14 pin attachment connector already installed

AT417736 $339.00

Page 7 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 17: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Bucket Offset Adapter

Lowers bucket approximately 2 inches.

AT351259 $561.00

Cab Enclosure

Requires Shoulder Belt, AT312692 or AT316210Includes Wiper Control Harness

AT425248 $1,450.00

Deluxe Wire Harness AT332451 $585.00

Demolition Door Kit

2- or 3-inch Seat Belt with Shoulder Harness required.

AT425249 $900.00

Diesel Fuel Fired Coolant Heater Kit AT366382 $2,682.00

Hazard Warning Lights KV25449 $175.00

Heater / Defroster Kit

* Recommend Cab Enclosure (AT368402)* Requires Deluxe Wire Harness, AT332451

AT332378 $842.00

Horn AT332457 $116.00

Radio

Radio ONLY. Refer to bulletin 08SS04 for mounting kit, speakers, andantennas.

SWJHD905 View Price

Rear Counterweight

Includes 2-100 lb. weights and mounting hardware.

AT393242 $274.00

Rear View Mirror Kit KV11791 $32.00

SMV Sign KV26958 $74.00

Side Window Kit AT332384 $512.00

Single Point Lift System AT329802 $696.00

Top Window Kit KV11776 $87.00

Vinyl Cab Enclosure AT332380 $293.00

Warning Beacon KV25448 $212.00

Miscellaneous:

66 in. Bolt-On Cutting Edge

Requires Seven Grade 8 Plow Bolts and Nuts (PB750225)

U16748 View Price

Tooth Bars:

56 in. Tooth Bar - 6 Teeth AT337951 $438.00

60 in. Tooth Bar - 7 Teeth KV12292 $445.00

66 in. Tooth Bar - 7 Teeth KV12294 $463.00

Page 8 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 18: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

66 in. Tooth Bar for BOCE - 6 Teeth AT347126 $703.00

Wheels and Tires, Single (Left Hand Only):

10x16.5 Treaded GPX Brawler SolidFlex, Left SW10165527L View Price

Wheels and Tires, Single (Right Hand Only):

10x16.5 8 PR Galaxy "Beefy Baby II" HD AT336800 $366.00

10x16.5 8 PR SKS Extra-Wall Heavy Duty AT332906 $317.00

10x16.5 Treaded GPX Brawler SolidFlex, Right SW10165527R View Price

Copyright © 1996-2014 Deere & Company. All Rights Reserved. About Our Site | Privacy and Data | Legal | |

Page 9 of 9

11/21/2014https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.E...

Page 19: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Current Date 13Apr2015

318E SKID STEER

318E SKID STEEREquipment for Base MachineEngine:Electronic Injection SystemAuto IdleGlow PlugsAutomatic Engine Shutdownwith AlarmV-Plenum CoolingHydraulic Cool-on-Demand Variable Speed FanDual Element Air CleanerFan Belt TensionerJohn Deere "Cool Gard II"Extended Life Anti-FreezeJohn Deere Plus 50 10w30engine oil5 Micron fuel filter withWater Separator100 Micron secondary fuelfilter21 Gallon (79 L) Fuel TankFinal Drive System andBrakes:Four Wheel DriveHydrostatic-Manual PumpsFour 80 HD continuous loopchain driveIntegral Automatic Wet-DiskBrake SpringApplied Hydraulic ReleaseGauges and Instruments:Fuel GaugeEngine Coolant TemperatureOperator Selectable LCDDigital Readout:HourmeterEngine RPMBattery VoltageEngine Coolant Temp.Hydraulic Oil Temp.Job ClockService CodesDiagnostic Codes

Configuration CodesIndicator Warning Lights:Battery Not ChargingHydraulics Locked OutPark Brake IlluminationHydraulic Oil Over Temp2-Speed EngagedAir Filter RestrictionHydraulic Oil FilterRestrictionLap Bar SwitchSeat SwitchDoor Open SwitchEngine PreheatLow Engine Oil PressureAutomatic Engine PreheatElectrical:12-Volt Electrical Battery750ccaAlternator 70 AmpHalogen Work Lights, 2 Frontand 1 RearProgrammable courtesylighting shutoff systemHydraulics:3-Spool Open Center Valve18 gpm (68 L/m) Pump5 Micron Hydraulic Filter10w30 Engine OilJohn Deere Boom andBucket Cylinders withCushioned Boom

Connect-under-pressureauxiliary hydraulic couplersLoader Arm, Bucket, &Auxiliary Hydraulic LockoutSystem

Auxiliary Hydraulics Lock-outOverrideBoom FloatPerformance Characteristics:Rated Operating Capacity1,950 lbs. (885 kg)

Tipping Load 3,900 lbs.(1,771 kg)Bucket Breakout Force6,000lbs. (2,724 kg)Boom Breakout Force3.500lbs. (1,589 kg)Axle Torque 4,701 lbs-ft(6,374 Nm)OperatorProtection/Comfort:FOPS / ROPS Roll-Guard withSide ScreensIn-Cab Boom LockoutSystemAdjustable Lap BarOperator Presence SystemInterlocking Lap Bar andRetractable Seat Belt systemSeat Switch & Lap BarInterlocks for Loader Arm,Bucket, & Auxiliary CircuitsDeluxe Headliner12V power portCell Phone cargo net storageInterior Dome LightingCup HolderGrab Handles for EasyEntry / ExitTop and Rear WindowsWater Shedding DeluxeSeatingConvenient Tie DownsAttachment Coupler:John Deere patented Quik-Tatch system (no greaserequired)Warranty (US and Canada):John Deere StandardWarranty 1 Year UnlimitedHours

Page 1 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 20: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Required - You must select one from each categoryBASE MACHINE

F.O.B. Dubuque, Iowa

Description Code Price318E SKID STEER 8201T $37,100.00

SKID STEER VALUE PACKAGES

PRICE LISTED IS A 10% DISCOUNT FOR OPTIONAL EQUIPMENT-EXCLUDING ENGINES. (Each option's price will be listedon the same line as that option.)

Description Code Price318E Standard Skid Steer

Note: Includes standard equipment

0800 In Base Price

Utility Package with Foot Controls

Package includes:Foot Controls (0900)Single-Speed (1025)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)10x16.5 8 PR Galaxy ""Beefy Baby II"" HD (2040)Standard Base Hydraulics (3000)Less Ride Control (3101)3 in. Seat Belt (4002)Manual Quik-Tatch (5000)Canopy - ROPS / FOPS (5200)Seat (Vinyl) (6000)Standard Fan Drive (6500)Horn (6800)Less EH Joystick Performance Package (7101)Backup Alarm (8040)

0845 ($182.00)

Utility Package with ISO Pattern EH Joystick Controls

Package includes:EH (ISO Pattern) Joystick Controls (0950)Single-Speed (1025)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)10x16.5 8 PR Galaxy ""Beefy Baby II"" HD (2040)Standard Hydraulics and Hydraulic Self-Leveling Up (3001)Less Ride Control (3101)3 in. Seat Belt (4002)Manual Quik-Tatch (5000)Canopy - ROPS / FOPS (5200)Mechanical Suspension Seat (Vinyl) (6001)Standard Fan Drive (6500)Horn (6800)Less EH Joystick Performance Package (7101)Backup Alarm (8040)Rear View Mirror (Interior Cab Mount) (8350)

0850 ($547.00)

Utility Package with Switchable EH Joystick Controls

Package includes:Switchable EH (Foot-H-ISO Pattern) Joystick Controls (0990)Single-Speed (1025)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)10x16.5 8 PR Galaxy "Beefy Baby II" HD (2040)

0855 ($888.00)

Page 2 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 21: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Standard Hydraulics and Hydraulic Self-Leveling Up (3001)Less Ride Control (3101)3 in. Seat Belt (4002)Manual Quik-Tatch (5000)Canopy - ROPS / FOPS (5200)Mechanical Suspension Seat (Vinyl) (6001)Standard Fan Drive (6500)Horn (6800)Less EH Joystick Performance Package (7101)Backup Alarm (8040)Rear View Mirror (interior cab mount) (8350)Keyless Start (Sealed Switch Module) (8395)

Deluxe Cab Package with Foot Controls

Package includes:Foot Controls (0900)Single-Speed (1025)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)10x16.5 8 PR Galaxy ""Beefy Baby II"" HD (2040)Standard Base Hydraulics (3000)Less Ride Control (3101)3 in. Seat Belt with Shoulder Harness (4003)Power Quik-Tatch (5001)Cab Enclosure with Air-Conditioning, Heat and Defrost (5204)Mechanical Suspension Seat (Vinyl) (6001)Standard Fan Drive (6500)Horn (6800)Less EH Joystick Performance Package (7101)Backup Alarm (8040)Rear View Mirror (Interior Cab Mount) (8350)

0860 ($798.00)

Deluxe Cab Package with ISO Pattern EH Joystick Controls

Package includes:EH (ISO Pattern) Joystick Controls (0950)Two-Speed (1050)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)10x16.5 8 PR Galaxy ""Beefy Baby II"" HD (2040)Standard Hydraulics (3000)Ride Control (3100)3 in. Seat Belt with Shoulder Harness (4003)Power Quik-Tatch (5001)Cab Enclosure with Air-Conditioning, Heat and Defrost (5204)Air Suspension Seat (Cloth) (6002)Standard Fan Drive (6500)Horn (6800)Less EH Joystick Performance Package (7101)Backup Alarm (8040)Radio, AM/FM/WB with Aux Input (8340)Rear View Mirror (interior cab mount) (8350)Keyless Start (Sealed Switch Module) (8395)

0865 ($1,544.00)

Deluxe Cab Package with EH Switchable Joystick Controls

Package includes:Switchable EH (Foot-H-ISO Pattern) Joystick Controls (0990)Two-Speed (1050)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)10x16.5 8 PR Galaxy ""Beefy Baby II"" HD (2040)Standard Hydraulics (3000)Ride Control (3100)3 in. Seat Belt with Shoulder Harness (4003)Power Quik-Tatch (5001)Cab Enclosure with Air-Conditioning, Heat and Defrost (5204)Air Suspension Seat (Cloth) (6002)Standard Fan Drive (6500)Horn (6800)Less EH Joystick Performance Package (7101)

0870 ($1,846.00)

Page 3 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 22: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Backup Alarm (8040)Radio, AM/FM/WB with Aux Input (8340)Rear View Mirror (interior cab mount) (8350)Keyless Start (Sealed Switch Module) (8395)

ENGINE

Description Code PriceEngine - Turbocharged

Option for the United States for use at altitudes above 5,000 feet. Not available forexport to markets without ultra-low sulfur fuel. This engine is certified to FT4 EPAemission standards.

Yanmar 4TNV98CT 3.3L4 Cylinder Turbo-Charged63 Gross hp (47.1 kW)60 Net hp (44.8 kW)

1301 $2,613.00

Engine - Naturally Aspirated

Required for the United States. Not available for export to markets without ultra-low sulfur fuel. This engine is certified to FT4 EPA emission standards.

Yanmar 4TNV98C 3.3L4 Cylinder Naturally Aspirated63 Gross hp (47.1 kW)60 Net hp (44.8 kW)

1305 $1,475.00

OPERATOR STATION

Description Code PriceCanopy - ROPS / FOPS 5200 In Base Price

Canopy - ROPS / FOPS with Severe Duty Door

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003).

5201 $2,768.00

Cab Enclosure with Air-Conditioning, Heat and Defrost

Glass Front Door w/ Wiper and Glass Slide Windows. Requires 2-inch Seat Beltwith Shoulder Harness (4001) or 3-inch Seat Belt with Shoulder Harness (4003).

5204 $4,608.00

Cab Enclosure with Air-Conditioning, Heat, Defrost, andSevere Duty Door

Polycarbonate Front Door w/ Wiper and Glass Side Windows.Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003).

5205 $6,672.00

SEAT

Description Code PriceSeat (Vinyl) 6000 ($417.00)

Mechanical Suspension Seat (Vinyl) 6001 In Base Price

Air Suspension Seat (Cloth)

For use with Cab Enclosure/Severe Duty Door (5204 & 5205).

6002 $452.00

Vinyl, Air-Ride Seat 6003 $452.00

Page 4 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 23: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

SEAT BELTS

Description Code Price2-Inch Seat Belt

For use with Canopy - ROPS / FOPS (5200)

4000 In Base Price

2-Inch Seat Belt with Shoulder Harness 4001 $212.00

3-Inch Seat Belt

Required in British Columbia and California; construction industry safety orders useof 3 inch wide webbing seat beltFor use with Canopy - ROPS / FOPS (5200)

4002 $164.00

3-Inch Seat Belt with Shoulder Harness 4003 $379.00

CONTROLS

Description Code PriceFoot Controls 0900 In Base Price

Hands Only Controls 0925 $796.00

E-H (ISO Pattern) Joystick Controls 0950 $2,565.00

EH (H Pattern) Joystick Controls

High Spring Efforts

0975 $2,778.00

EH Foot and Joystick Controls 0980 $3,894.00

Switchable EH Foot-H-ISO Pattern Joystick Controls

Code 8395 Keyless Start (Sealed Switch Module) is required.

Three way Switchable Controls between EH Foot Control, ISO Joystick Control, orH-Pattern Joystick Control modes.

Includes Switchable Accelerator/Decelerator with right side foot pedal whenoperating in ISO or H-Pattern Joystick Control mode.

0990 $5,585.00

JOYSTICK PERFORMANCE

Description Code PriceEH Joystick Performance Package

Code 8395 Keyless Start (Sealed Switch Module) is required.

Switchable control patterns between ISO and H (If ordered with code 0950 or0975)Selectable propel aggressivenessCreeper ModeBoom and Bucket speed settings12V 3 Pin and 14 Pin Attachment Control Harness

7100 $798.00

Less EH Joystick Performance Package 7101 In Base Price

TRANSMISSION

Description Code PriceSingle-Speed 1025 In Base Price

Page 5 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 24: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Two-Speed 1050 $2,508.00

HYDRAULIC OPTIONS

Description Code PriceStandard Hydraulics

Pump Flow = 18 gpm

3000 In Base Price

Standard Hydraulics and Hydraulic Self-Leveling Up

Pump Flow = 18 gpm

Order Code 3101 (Less Ride Control) is required; Order Code 3100 (Ride Control)is NOT available with this option.

3001 $575.00

High Flow Hydraulics

Pump Flow = 27 gpm

Includes 1/2 in Auxiliary coupler sizes.

3002 $1,830.00

High Flow Hydraulics and Hydraulic Self-Leveling Up

Pump Flow = 27 gpm

Order Code 3101 (Less Ride Control) is required; Order Code 3100 (Ride Control)is NOT available with this option.

Includes 1/2 in Auxiliary coupler sizes.

3003 $2,408.00

RIDE CONTROL

Description Code PriceRide Control

Code 8395 Keyless Start (Sealed Switch Module) is required.

3100 $995.00

Less Ride Control 3101 In Base Price

QUIK-TATCH

Description Code PriceManual Quik-Tatch 5000 In Base Price

Power Quik-Tatch 5001 $834.00

COOLING FAN

Description Code PriceStandard Fan Drive 6500 In Base Price

Reversing Fan Drive 6501 $830.00

HORN

Description Code PriceHorn 6800 $140.00

Less Horn 6801 In Base Price

Page 6 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 25: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

WHEELS AND TIRES

Description Code Price10x16.5 8 PR SKS Extra-Wall Heavy Duty

For use primarily in dirt applicationsGives 62.9 in. Skid Steer width at narrow settingGives 69.0 in. Skid Steer width at wide setting

2280 $1,321.00

10x16.5 8 PR Galaxy "Beefy Baby II" HD

Gives 62.4 in. Skid Steer width at narrow settingGives 68.4 in. Skid Steer width at wide setting

2040 $1,826.00

10x16.5 Brawler Treaded SolidFlex

Gives 67.4 in. Skid Steer width at wide settingNot Compatible with Tracks

2400 $3,600.00

10x16.5 10 PR Galaxy Hulk 2430 $2,031.00

OPERATOR MANUAL & DECALS

Description Code PriceEnglish Operator's Manual & Decals

For use with FT4 Engine

1501 No Charge

English Operator's Manual & No Text Decals

Not for CanadaFor use with IT4/Stage IIIB Engine

1503 No Charge

French Operator's Manual & Decals

For use with FT4 Engine

1510 No Charge

French Operator's Manual & No Text Decals

Not for CanadaFor use with IT4/Stage IIIB Engine

1512 No Charge

Spanish Operator's Manual & Decals

For use with FT4 Engine

1515 No Charge

Spanish Operator's Manual & No Text Decals

Not for CanadaFor use with IT4/Stage IIIB Engine

1516 No Charge

Optional - Select as desiredKITS AND ACCESSORIES - FACTORY INSTALLED

Description Code PriceBackup Alarm 8040 $105.00

Battery, Heavy Duty, 925cca

NOTE: Not for use with Cold Start Package (8050)

8045 $55.00

Cold Start Package

Includes Heavy Duty 925cca Battery, Hydraulic Bypass, and Block Heater. (110

8050 $303.00

Page 7 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 26: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

volt)

Engine Air Precleaner 8060 $455.00

Hazard Warning Lights 8075 $159.00

Chrome Exhaust 8225 $328.00

Counterweight, Stackable (Single Set)

Includes 2 - 86 lb weights (39 Kg)

8300 $349.00

Counterweight, Stackable (Second Set)

Includes 2 - 86 lb weights (39 Kg)Requires Counterweight, Stackable (Single Set) (8300)

8305 $349.00

Counterweight, Stackable (Third Set)

Includes 2 - 86 lb weights (39 Kg)Requires Counterweight, Stackable (Single Set) (8300) and Counterweight,Stackable (Second Set) (8305)

8310 $349.00

Radio, AM/FM/WB with Aux Input

For use with enclosed cab only: codes 5204 & 5205

8340 $540.00

Rear View Mirror (Interior cab mount) 8350 $90.00

HD Rear Grille

Provides protection to cooling package

8370 $486.00

Foot Rest with Floormat

For use with E-H (ISO Pattern) Joystick Controls (0950), or E-H (H Pattern)Joystick Controls (0975).

8380 $144.00

Floormat

For use with E-H (ISO Pattern) Joystick Controls (0950), or E-H (H Pattern)Joystick Controls (0975).

8390 $122.00

Switchable Accelerator / Decelerator

Turns existing foot throttle in to a decelerating pedal.

Requires order code 8395 (Keyless Start) and 0950 (E-H (ISO Pattern) JoystickControls) or 0975 (EH (H-Pattern) Joystick Controls).

8392 $237.00

Keyless Start (Sealed Switch Module)

Includes: programmable machine security code system

8395 $399.00

BUCKETS: (REFER TO BUCKET COMPATABILITY CHART)

See Attachments for Multi-Purpose Buckets

Description Code Price66 in. Construction Bucket (16.2 cu. ft.) 9031 $997.00

66 in. Construction Bucket (16.2 cu. ft.) with Edge 9032 $1,139.00

Page 8 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 27: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

66 in. Dirt Bucket (14.5 cu. ft.) 9033 $870.00

66 in. Dirt Bucket (14.5 cu. ft.) with Edge 9034 $1,082.00

66 in. Dirt Bucket (14.5 cu. ft.) with Teeth 9035 $1,048.00

66 in. Tooth Bucket (16.2 cu. ft.) 9200 $1,099.00

66 in. Utility Bucket (20.6 cu. ft.) 9310 $963.00

66 in. Utility Bucket (20.6 cu. ft.) with Edge 9311 $1,128.00

72 in. Construction Bucket (17.8 cu. ft.) 9040 $1,030.00

72 in. Construction Bucket (17.8 cu. ft.) with Edge 9041 $1,231.00

72 in. Tooth Bucket (17.8 cu. ft.) 9210 $1,231.00

72 in. Utility Bucket (22.6 cu. ft.) 9320 $1,065.00

72 in. Utility Bucket (22.6 cu. ft.) with Edge 9321 $1,252.00

76 in. HD Construction Bucket (18.5 cu. ft.) 9045 $1,096.00

76 in. HD Construction Bucket (18.5 cu. ft.) with Edge 9046 $1,319.00

76 in. HD Tooth Bucket (18.5 cu. ft.) 9215 $1,322.00

EXPORT CODES

Description Code PriceAustralian Compliance Certificate and Hearing ProtectionCaution Label

9280 No Charge

SPECIAL EQUIPMENT - ORDER AS DESIRED

Description Code PriceRust Preventative

Coating protects exposed unpainted surfaces from road salt during shipment.Applied at PSL.Not for use with export shipments as export pricing includes rust prevention.

9909 $160.00

DEALER-INSTALLED KITS

Description Code PriceBUCKETS:See Attachments for Multi-Purpose Buckets

66 in. Construction Bucket (16.2 cu. ft.) KV11630 $997.00

66 in. Dirt Bucket (14.5 cu. ft.) AT354876 $870.00

66 in. Dirt Bucket (14.5 cu. ft.) with Edge AT354874 $1,082.00

66 in. Dirt Bucket (14.5 cu. ft.) with Teeth AT354880 $1,048.00

66 in. Tooth Bucket (16.2 cu. ft.) KV12311 $1,099.00

Page 9 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 28: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

66 in. Utility Bucket (20.6 cu. ft.) with Edge KV24755 $1,128.00

76 in. HD Construction Bucket (18.5 cu. ft.) AT329506 $1,096.00

76 in. HD Construction Bucket (18.5 cu. ft.) with Edge AT329644 $1,319.00

76 in. HD Tooth Bucket (18.5 cu. ft.) AT329580 $1,322.00

Buckets:

60 in. Dirt Bucket (14.3 cu. ft.) AT331803 $813.00

60 in. Dirt Bucket (14.3 cu. ft.) with Teeth AT336694 $1,076.00

66 in. Construction Bucket (16.2 cu. ft.) with Edge KV24751 $1,139.00

66 in. Foundry Bucket (14.6 cu. ft.) KV11636 $889.00

66 in. Utility Bucket (20.6 cu. ft.) KV22801 $963.00

72 in. Construction Bucket (17.8 cu. ft.) AT319177 $1,030.00

72 in. Construction Bucket (17.8 cu. ft.) with Edge AT322309 $1,231.00

72 in. Foundry Bucket (16.0 cu. ft.) KV11637 $956.00

72 in. Tooth Bucket (17.8 cu. ft.) AT321177 $1,231.00

72 in. Utility Bucket (22.6 cu. ft.) KV21474 $1,065.00

72 in. Utility Bucket (22.6 cu. ft.) with Edge KV24756 $1,252.00

Construction Buckets with Edge, 66-78" Bundle

Includes 66", 72", 76", and 78" sizes.Different bucket sizes fit different machine sizes.Price includes a 5% discount from individual buckets' prices.

AT340103 $4,801.00

Construction Buckets with Edge, 72-84" Bundle

Includes 72", 76", 78", and 84" sizes.Different bucket sizes fit different machine sizes.Price includes a 5% discount from individual buckets' prices.

AT340104 $5,071.00

Cutting Edges:

76 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

T223081 View Price

Kits and Accessories:

12 Volt Demonstration Kit

3-pin connector

KV21995 $305.00

Attachment Control

For E series (models 328, 329, 332, and 333) with EH controls (0950,0975, 0980, and 0990). Includes 3-pin and 14-pin connector. Replaces

AT427986 $406.00

Page 10 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 29: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

existing handles.

Attachment Control Kit

For E series (models 318, 319, 320, 323, and 326) with manual controlwith Foot Controls (0900) or Hand Controls (0925) OR with EH controls(0950, 0975, 0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.

AT427985 $721.00

Backup Alarm

For use with EH Controls (0950) or (0975)

AT348451 $204.00

Backup Alarm (Foot, Hand Controls)

For use with Foot Controls (0900) or Hand Controls (0925)

AT348456 $204.00

Beacon Warning Light AT431920 $320.00

Block Heater Kit AT427686 $110.00

Bobcat Attachment Harness Adapter Kit

Must have the 14 pin attachment connector already installed

AT417736 $344.00

Cold Start Package AT432105 $355.00

Counterweight, Stackable (Single Set)

Includes 2 - 86 lb weights (39 Kg)

AT348835 $352.00

EH Joystick Performance Package

Factory Code 8395 or kit AT427990 Keyless Start (Sealed Switch Module)is required prior to installing EH performance package

Enables the following features:Switchable control patterns between ISO and HSelectable propel aggressivenessCreeper ModeBoom and Bucket speed settings

AT427988 $593.00

Engine Air Pre-Cleaner Kit

For use with FT4 Naturally Aspirated Engine (Order code 1305)

AT425360 $457.00

Engine Air Pre-Cleaner Kit

For Turbo Engines (FT4 and Non-Reg); Order codes 1301 or 1310

AT425361 $457.00

Field Kit, Reversing Fan

For S/N 269401 and below.

AT413072 $964.00

Foot Throttle Removal Kit AT374642 $51.00

HD Rear Grille

Provides protection to cooling package

AT398389 $593.00

Hazard Warning Lights AT431921 $127.00

High Spring Effort Joysticks AT433683 $766.00

Horn AT348484 $152.00

Page 11 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 30: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

For use with Foot Controls (0900) or Hand Controls (0925)

Horn

For use with EH Controls (0950) or (0975)

AT339797 $115.00

Hydraulic Quick Coupler Adapter Kit

Adapts Highflow Machine Aux Couplers to Operate Low Flow Attachment.

AT428072 $325.00

Joystick Pod Mounted Throttle AT419446 $152.00

Keyless Start (Sealed Switch Module) AT427990 $401.00

Radio, AM/FM/WB with Aux Input AT427984 $510.00

Reversing Fan Kit

For S/N 269402 and above.

AT448244 $834.00

SMV Sign AT427982 $77.00

Severe Duty Door

Includes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.

AT417602 $3,076.00

Severe Duty Door

Includes windshield wiper.For ROPS Canopy units also order AT440395.Required to meet ISO 8084 Forestry Applications.S/N 269402 and above.

AT446334 $3,076.00

Severe Duty Door Hardware and Washer Bottle Kit AT440395 $170.00

Single Point Lift System AT417891 $1,523.00

Standard Door, Field Kit

S/N 269401 and below.

AT425132 $1,030.00

Standard Door, Field Kit

S/N 269402 and above.

AT446335 $1,030.00

Miscellaneous:

66 in. Bolt-On Cutting Edge

Requires Seven Grade 8 Plow Bolts and Nuts (PB750225)

U16748 View Price

72 in. Bolt-On Cutting Edge T32742 View Price

Operator Environment:

Trim Elbow Pad Field Kit AT417600 $28.00

Tooth Bars:

66 in. Tooth Bar - 7 Teeth KV12294 $470.00

Page 12 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 31: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

66 in. Tooth Bar for BOCE - 6 Teeth AT347126 $714.00

72 in. Tooth Bar - 7 Teeth KV11598 $510.00

72 in. Tooth Bar for BOCE - 8 Teeth AT347128 $733.00

76 in. Tooth Bar - 8 Teeth AT331906 $525.00

76 in. Tooth Bar for BOCE - 8 Teeth AT347130 $772.00

Wheels and Tires, Single (Left Hand Only):

10x16.5 10PR Galaxy Hulk, Left AT446723 $496.00

10x16.5 Treaded GPX Brawler SolidFlex, Left SW10165527L View Price

Wheels and Tires, Single (Right Hand Only):

10x16.5 10PR Galaxy Hulk, Right AT446724 $496.00

10x16.5 8 PR Galaxy "Beefy Baby II" HD AT336800 $371.00

10x16.5 8 PR SKS Extra-Wall Heavy Duty AT332906 $322.00

10x16.5 Treaded GPX Brawler SolidFlex, Right SW10165527R View Price

REFERRAL ATTACHMENTS

Description Code PriceG.R. Mfg.:G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales supportand assistance will be the responsibility of G.R. Manufacturing, Inc., and will behandled directly between the Dealer and G.R. Manufacturing, Inc.

G.R. Manufacturing, Inc.4800 Commerce DriveTrussville, Alabama 35173Phone: (800)841-8001Fax: (205)655-8005

Auxiliary Hydraulic Line Quick Coupler AT437326 $180.00

Front Work Lights and Rear Light Guards AT432854 $218.00

Guard, Bucket Cylinder Rod AT406620 $320.00

Level II FOPS Plate

Required to meet ISO 8083 Level 2 Forestry ApplicationsFor use on D and E Series

AT445276 $602.00

Lift Cylinder Hose Guards AT437325 $320.00

Operator Rear Window / Side Window Guards

Required to meet ISO 8084 Forestry ApplicationsNot recommended for use with Hazard Warning Lights

AT372949 $640.00

Page 13 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 32: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Rear Grille Guard w/o Side Bumpers AT437324 $980.00

Toe Guard and Door Upgrade Kit

Required to meet ISO 8084 Forestry Applications

AT372950 $492.00

Copyright © 1996-2014 Deere & Company. All Rights Reserved. About Our Site | Privacy and Data | Legal | |

Page 14 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 33: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Current Date 13Apr2015

320E SKID STEER

320E SKID STEEREquipment for Base MachineEngine:Electronic Injection SystemAuto IdleGlow PlugsAutomatic Engine Shutdownwith AlarmV-Plenum CoolingHydraulic Cool-on-DemandVariable Speed FanDual Element Air CleanerFan Belt TensionerJohn Deere "Cool Gard II"Extended Life Anti-FreezeJohn Deere Plus 50 10w30engine oil5 Micron fuel filter withWater Separator100 Micron secondary fuelfilter21 Gallon (79 L) Fuel TankFinal Drive System andBrakes:Four Wheel DriveHydrostatic-Manual PumpsFour 80 HD continuous loopchain driveIntegral Automatic Wet-DiskBrake Spring AppliedHydraulic ReleaseGauges and Instruments:Fuel GaugeEngine Coolant TemperatureOperator Selectable LCDDigital Readout:HourmeterEngine RPMBattery VoltageEngine Coolant Temp.Hydraulic Oil Temp.Job ClockService CodesDiagnostic Codes

Configuration CodesIndicator Warning Lights:Battery Not ChargingHydraulics Locked OutPark Brake IlluminationHydraulic Oil Over Temp2-Speed EngagedAir Filter RestrictionHydraulic Oil FilterRestrictionLap Bar SwitchSeat SwitchDoor Open SwitchEngine PreheatLow Engine Oil PressureAutomatic Engine PreheatElectrical:12-Volt Electrical Battery750ccaAlternator 70 AmpHalogen Work Lights, 2 Frontand 1 RearProgrammable courtesylighting shutoff systemHydraulics:3-Spool Open Center Valve20 gpm (76 L/m) Pump5 Micron Hydraulic Filter10w30 Engine OilJohn Deere Boom andBucket Cylinders withCushioned BoomConnect-under-pressureauxiliary hydraulic couplersLoader Arm, Bucket, &Auxiliary Hydraulic LockoutSystemAuxiliary Hydraulics Lock-outOverrideBoom FloatPerformance Characteristics:

Rated Operating Capacity2,190 lbs. (994 kg)

Tipping Load 4,380 lbs.(1,989 kg)Bucket Breakout Force6,000lbs. (2,724 kg)Boom Breakout Force3.500lbs. (1,589 kg)Axle Torque 4,994 lbs-ft(6,771 Nm)OperatorProtection/Comfort:FOPS / ROPS Roll-Guard withSide ScreensIn-Cab Boom LockoutSystemAdjustable Lap BarOperator Presence SystemInterlocking Lap Bar andRetractable Seat Belt system

Seat Switch & Lap BarInterlocks for Loader Arm,Bucket, & Auxiliary CircuitsDeluxe Headliner12V power portCell Phone cargo net storage

Interior Dome LightingCup HolderGrab Handles for EasyEntry / ExitTop and Rear WindowsWater Shedding DeluxeSeatingConvenient Tie DownsAttachment Coupler:John Deere patented Quik-Tatch system (no greaserequired)Warranty (US and Canada):John Deere StandardWarranty 1 Year UnlimitedHours

Page 1 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 34: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Required - You must select one from each categoryBASE MACHINE

F.O.B. Dubuque, Iowa

Description Code Price320E SKID STEER 8311T $38,465.00

SKID STEER VALUE PACKAGES

PRICE LISTED IS A 10% DISCOUNT FOR OPTIONAL EQUIPMENT-EXCLUDING ENGINES. (Each option's price will be listedon the same line as that option.)

Description Code Price320E Standard Skid Steer

Note: Includes standard equipment

0800 In Base Price

Utility Package with Foot Controls

Package includes:Foot Controls (0900)Two-Speed (1050)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)Standard Hydraulics and Hydraulic Self-Leveling Up (3001)Less Ride Control (3101)3 in. Seat Belt (4002)Power Quik-Tatch (5001)Canopy - ROPS / FOPS (5200)Mechanical Suspension Seat (Vinyl) (6001)Standard Fan Drive (6500)Horn (6800)Less EH Joystick Performance Package (7101)Backup Alarm (8040)Rear View Mirror (Interior Cab Mount) (8350)

0845 ($656.00)

Utility Package with ISO Pattern EH Joystick Controls

Package includes:EH (ISO Pattern) Joystick Controls (0950)Two-Speed (1050)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)Standard Hydraulics (3000)Ride Control (3100)3 in. Seat Belt (4002)Power Quik-Tatch (5001)Canopy - ROPS / FOPS (5200)Vinyl Air-Ride Seat (6003)Reversing Fan Drive (6501)Horn (6800)EH Joystick Performance Package (7100)Backup Alarm (8040)Rear View Mirror (Interior Cab Mount) (8350)Foot Rest with Floormat (8380)Switchable Accelerator/Decelerator (8392)Keyless Start (Sealed Switch Module) (8395)

0850 ($1,241.00)

Utility Package with Switchable EH Joystick Controls

Package includes:Switchable EH (Foot-H-ISO Pattern) Joystick Controls (0990)

0855 ($1,505.00)

Page 2 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 35: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Two-Speed (1050)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)Standard Hydraulics (3000)Ride Control (3100)3 in. Seat Belt (4002)Power Quik-Tatch (5001)Canopy - ROPS / FOPS (5200)Vinyl Air-Ride Seat (6003)Reversing Fan Drive (6501)Horn (6800)EH Joystick Performance Package (7100)Backup Alarm (8040)Rear View Mirror (interior cab mount) (8350)Keyless Start (Sealed Switch Module) (8395)

Deluxe Cab Package with Foot Controls

Package includes:Foot Controls (0900)Two-Speed (1050)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)Standard Hydraulics and Hydraulic Self-Leveling Up (3001)Less Ride Control (3101)3 in. Seat Belt with Shoulder Harness (4003)Power Quik-Tatch (5001)Cab Enclosure with Air-Conditioning, Heat and Defrost (5204)Air Suspension Seat (Cloth) (6002)Standard Fan Drive (6500)Horn (6800)Less EH Joystick Performance Package (7101)Backup Alarm (8040)Chrome Exhaust (8225)Radio, AM/FM/WB with Aux Input (8340)Rear View Mirror (Interior Cab Mount) (8350)

0860 ($1,271.00)

Deluxe Cab Package with ISO Pattern EH Joystick Controls

Package includes:EH (ISO Pattern) Joystick Controls (0950)Two-Speed (1050)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)Standard Hydraulics (3000)Ride Control (3100)3 in. Seat Belt with Shoulder Harness (4003)Power Quik-Tatch (5001)Cab Enclosure with Air-Conditioning, Heat and Defrost (5204)Air Suspension Seat (Cloth) (6002)Reversing Fan Drive (6501)Horn (6800)EH Joystick Performance Package (7100)Backup Alarm (8040)Chrome Exhaust (8225)Radio, AM/FM/WB with Aux Input (8340)Rear View Mirror (interior cab mount) (8350)Foot Rest with Floormat (8380)Switchable Accelerator/Decelerator (8392)Keyless Start (Sealed Switch Module) (8395)

0865 ($1,810.00)

Deluxe Cab Package with EH Switchable Joystick Controls

Package includes:Switchable EH (Foot-H-ISO Pattern) Joystick Controls (0990)Two-Speed (1050)Naturally Aspirated Engine (1305)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)

0870 ($2,074.00)

Page 3 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 36: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Standard Hydraulics (3000)Ride Control (3100)3 in. Seat Belt with Shoulder Harness (4003)Power Quik-Tatch (5001)Cab Enclosure with Air-Conditioning, Heat and Defrost (5204)Air Suspension Seat (Cloth) (6002)Reversing Fan Drive (6501)Horn (6800)EH Joystick Performance Package (7100)Backup Alarm (8040)Chrome Exhaust (8225)Radio, AM/FM/WB with Aux Input (8340)Rear View Mirror (interior cab mount) (8350)Keyless Start (Sealed Switch Module) (8395)

ENGINE

Description Code PriceEngine - Turbocharged

Option for the United States for use at altitudes above 5,000 feet. Not available forexport to markets without ultra-low sulfur fuel. This engine is certified to FT4 EPAemission standards.

Yanmar 4TNV98CT 3.3L4 Cylinder Turbo-Charged69 Gross hp (51.7 kW)66 Net hp (49.4 kW)

1301 $2,613.00

Engine - Naturally Aspirated

Required for the United States. Not available for export to markets without ultra-low sulfur fuel. This engine is certified to FT4 EPA emission standards.

Yanmar 4TNV98C 3.3L4 Cylinder Naturally Aspirated69 Gross hp (51.7 kW)66 Net hp (49.4 kW)

1305 $1,475.00

OPERATOR STATION

Description Code PriceCanopy - ROPS / FOPS 5200 In Base Price

Canopy - ROPS / FOPS with Severe Duty Door

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003).

5201 $2,768.00

Cab Enclosure with Air-Conditioning, Heat and Defrost

Glass Front Door w/ Wiper and Glass Slide Windows. Requires 2-inch Seat Beltwith Shoulder Harness (4001) or 3-inch Seat Belt with Shoulder Harness (4003).

5204 $4,608.00

Cab Enclosure with Air-Conditioning, Heat, Defrost, andSevere Duty Door

Polycarbonate Front Door w/ Wiper and Glass Side Windows.Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003).

5205 $6,672.00

SEAT

Description Code PriceSeat (Vinyl) 6000 ($417.00)

Page 4 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 37: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Mechanical Suspension Seat (Vinyl) 6001 In Base Price

Air Suspension Seat (Cloth)

For use with Cab Enclosure/Severe Duty Door (5204 & 5205).

6002 $452.00

Vinyl, Air-Ride Seat 6003 $452.00

SEAT BELTS

Description Code Price2-Inch Seat Belt

For use with Canopy - ROPS / FOPS (5200)

4000 In Base Price

2-Inch Seat Belt with Shoulder Harness 4001 $212.00

3-Inch Seat Belt

Required in British Columbia and California; construction industry safety orders useof 3 inch wide webbing seat beltFor use with Canopy - ROPS / FOPS (5200)

4002 $164.00

3-Inch Seat Belt with Shoulder Harness 4003 $379.00

CONTROLS

Description Code PriceFoot Controls 0900 In Base Price

Hands Only Controls 0925 $796.00

E-H (ISO Pattern) Joystick Controls 0950 $2,565.00

EH (H Pattern) Joystick Controls

High Spring Efforts

0975 $2,778.00

EH Foot and Joystick Controls 0980 $3,894.00

Switchable EH Foot-H-ISO Pattern Joystick Controls

Code 8395 Keyless Start (Sealed Switch Module) is required.

Three way Switchable Controls between EH Foot Control, ISO Joystick Control, orH-Pattern Joystick Control modes.

Includes Switchable Accelerator/Decelerator with right side foot pedal whenoperating in ISO or H-Pattern Joystick Control mode.

0990 $5,585.00

JOYSTICK PERFORMANCE

Description Code PriceEH Joystick Performance Package

Code 8395 Keyless Start (Sealed Switch Module) is required.

Switchable control patterns between ISO and H (If ordered with code 0950 or0975)Selectable propel aggressivenessCreeper ModeBoom and Bucket speed settings

7100 $798.00

Page 5 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 38: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

12V 3 Pin and 14 Pin Attachment Control Harness

Less EH Joystick Performance Package 7101 In Base Price

TRANSMISSION

Description Code PriceSingle-Speed 1025 In Base Price

Two-Speed 1050 $2,508.00

HYDRAULIC OPTIONS

Description Code PriceStandard Hydraulics

Pump Flow = 20 gpm

3000 In Base Price

Standard Hydraulics and Hydraulic Self-Leveling Up

Pump Flow = 20 gpm

Order Code 3101 (Less Ride Control) is required; Order Code 3100 (Ride Control)is NOT available with this option.

3001 $575.00

High Flow Hydraulics

Pump Flow = 30 gpm

Includes 1/2 in Auxiliary coupler sizes.

3002 $1,830.00

High Flow Hydraulics and Hydraulic Self-Leveling Up

Pump Flow = 30 gpm

Order Code 3101 (Less Ride Control) is required; Order Code 3100 (Ride Control)is NOT available with this option.

Includes 1/2 in Auxiliary coupler sizes.

3003 $2,408.00

RIDE CONTROL

Description Code PriceRide Control

Code 8395 Keyless Start (Sealed Switch Module) is required.

3100 $995.00

Less Ride Control 3101 In Base Price

QUIK-TATCH

Description Code PriceManual Quik-Tatch 5000 In Base Price

Power Quik-Tatch 5001 $834.00

COOLING FAN

Description Code PriceStandard Fan Drive 6500 In Base Price

Page 6 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 39: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Reversing Fan Drive 6501 $830.00

HORN

Description Code PriceHorn 6800 $140.00

Less Horn 6801 In Base Price

WHEELS AND TIRES

Description Code Price12x16.5 10 PR SKS Extra-Wall

Gives 70.0 in. Skid Steer width at narrow settingGives 73.3 in. Skid Steer width at wide setting

2310 $1,636.00

12x16.5 10 PR Titan HD2000-III

Gives 70.3 in. Skid Steer width at narrow settingGives 73.2 in. Skid Steer width at wide setting

2070 $2,147.00

10x16.5 Brawler Treaded SolidFlex

Gives 67.4 in. Skid Steer width at wide settingNot Compatible with Tracks

2400 $3,600.00

12x16.5 Treaded Brawler SolidFlex

Gives 73.3 in. Skid Steer width at wide settingNot Compatible with Tracks

2410 $4,300.00

10x16.5 8 PR SKS Extra-Wall Heavy Duty

For use primarily in dirt applicationsGives 62.9 in. Skid Steer width at narrow settingGives 69.0 in. Skid Steer width at wide setting

2280 $1,321.00

10x16.5 8 PR Galaxy "Beefy Baby II" HD

Gives 62.4 in. Skid Steer width at narrow settingGives 68.4 in. Skid Steer width at wide setting

2040 $1,826.00

12x16.5 12 PR Galaxy Hulk 2440 $2,470.00

OPERATOR MANUAL & DECALS

Description Code PriceEnglish Operator's Manual & Decals

For use with FT4 Engine

1501 No Charge

English Operator's Manual & No Text Decals

Not for CanadaFor use with IT4/Stage IIIB Engine

1503 No Charge

French Operator's Manual & Decals

For use with FT4 Engine

1510 No Charge

French Operator's Manual & No Text Decals 1512 No Charge

Page 7 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 40: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Not for CanadaFor use with IT4/Stage IIIB Engine

Spanish Operator's Manual & Decals

For use with FT4 Engine

1515 No Charge

Spanish Operator's Manual & No Text Decals

Not for CanadaFor use with IT4/Stage IIIB Engine

1516 No Charge

Optional - Select as desiredKITS AND ACCESSORIES - FACTORY INSTALLED

Description Code PriceBackup Alarm 8040 $105.00

Battery, Heavy Duty, 925cca

NOTE: Not for use with Cold Start Package (8050)

8045 $55.00

Cold Start Package

Includes Heavy Duty 925cca Battery, Hydraulic Bypass, and Block Heater. (110volt)

8050 $303.00

Engine Air Precleaner 8060 $455.00

Hazard Warning Lights 8075 $159.00

Chrome Exhaust 8225 $328.00

Counterweight, Stackable (Single Set)

Includes 2 - 86 lb weights (39 Kg)

8300 $349.00

Counterweight, Stackable (Second Set)

Includes 2 - 86 lb weights (39 Kg)Requires Counterweight, Stackable (Single Set) (8300)

8305 $349.00

Counterweight, Stackable (Third Set)

Includes 2 - 86 lb weights (39 Kg)Requires Counterweight, Stackable (Single Set) (8300) and Counterweight,Stackable (Second Set) (8305)

8310 $349.00

Radio, AM/FM/WB with Aux Input

For use with enclosed cab only: codes 5204 & 5205

8340 $540.00

Rear View Mirror (Interior cab mount) 8350 $90.00

HD Rear Grille

Provides protection to cooling package

8370 $486.00

Foot Rest with Floormat

For use with E-H (ISO Pattern) Joystick Controls (0950), or E-H (H Pattern)Joystick Controls (0975).

8380 $144.00

Floormat 8390 $122.00

Page 8 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 41: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

For use with E-H (ISO Pattern) Joystick Controls (0950), or E-H (H Pattern)Joystick Controls (0975).

Switchable Accelerator / Decelerator

Turns existing foot throttle in to a decelerating pedal.

Requires order code 8395 (Keyless Start) and 0950 (E-H (ISO Pattern) JoystickControls) or 0975 (EH (H-Pattern) Joystick Controls).

8392 $237.00

Keyless Start (Sealed Switch Module)

Includes: programmable machine security code system

8395 $399.00

BUCKETS: (REFER TO BUCKET COMPATABILITY CHART)

See Attachments for Multi-Purpose Buckets

Description Code Price66 in. Construction Bucket (16.2 cu. ft.) 9031 $997.00

66 in. Construction Bucket (16.2 cu. ft.) with Edge 9032 $1,139.00

66 in. Dirt Bucket (14.5 cu. ft.) 9033 $870.00

66 in. Dirt Bucket (14.5 cu. ft.) with Edge 9034 $1,082.00

66 in. Dirt Bucket (14.5 cu. ft.) with Teeth 9035 $1,048.00

66 in. Tooth Bucket (16.2 cu. ft.) 9200 $1,099.00

66 in. Utility Bucket (20.6 cu. ft.) 9310 $963.00

66 in. Utility Bucket (20.6 cu. ft.) with Edge 9311 $1,128.00

72 in. Construction Bucket (17.8 cu. ft.) 9040 $1,030.00

72 in. Construction Bucket (17.8 cu. ft.) with Edge 9041 $1,231.00

72 in. Tooth Bucket (17.8 cu. ft.) 9210 $1,231.00

72 in. Utility Bucket (22.6 cu. ft.) 9320 $1,065.00

72 in. Utility Bucket (22.6 cu. ft.) with Edge 9321 $1,252.00

76 in. HD Construction Bucket (18.5 cu. ft.) 9045 $1,096.00

76 in. HD Construction Bucket (18.5 cu. ft.) with Edge 9046 $1,319.00

76 in. HD Tooth Bucket (18.5 cu. ft.) 9215 $1,322.00

EXPORT CODES

Description Code PriceAustralian Compliance Certificate and Hearing ProtectionCaution Label

9280 No Charge

Page 9 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 42: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

SPECIAL EQUIPMENT - ORDER AS DESIRED

Description Code PriceRust Preventative

Coating protects exposed unpainted surfaces from road salt during shipment.Applied at PSL.Not for use with export shipments as export pricing includes rust prevention.

9909 $160.00

DEALER-INSTALLED KITS

Description Code PriceBUCKETS:See Attachments for Multi-Purpose Buckets

66 in. Construction Bucket (16.2 cu. ft.) KV11630 $997.00

66 in. Dirt Bucket (14.5 cu. ft.) AT354876 $870.00

66 in. Dirt Bucket (14.5 cu. ft.) with Edge AT354874 $1,082.00

66 in. Dirt Bucket (14.5 cu. ft.) with Teeth AT354880 $1,048.00

66 in. Tooth Bucket (16.2 cu. ft.) KV12311 $1,099.00

66 in. Utility Bucket (20.6 cu. ft.) with Edge KV24755 $1,128.00

76 in. HD Construction Bucket (18.5 cu. ft.) AT329506 $1,096.00

76 in. HD Construction Bucket (18.5 cu. ft.) with Edge AT329644 $1,319.00

76 in. HD Tooth Bucket (18.5 cu. ft.) AT329580 $1,322.00

Buckets:

60 in. Dirt Bucket (14.3 cu. ft.) AT331803 $813.00

60 in. Dirt Bucket (14.3 cu. ft.) with Edge AT333697 $1,007.00

60 in. Dirt Bucket (14.3 cu. ft.) with Teeth AT336694 $1,076.00

66 in. Construction Bucket (16.2 cu. ft.) with Edge KV24751 $1,139.00

66 in. Foundry Bucket (14.6 cu. ft.) KV11636 $889.00

66 in. Utility Bucket (20.6 cu. ft.) KV22801 $963.00

72 in. Construction Bucket (17.8 cu. ft.) AT319177 $1,030.00

72 in. Construction Bucket (17.8 cu. ft.) with Edge AT322309 $1,231.00

72 in. Foundry Bucket (16.0 cu. ft.) KV11637 $956.00

72 in. Tooth Bucket (17.8 cu. ft.) AT321177 $1,231.00

72 in. Utility Bucket (22.6 cu. ft.) KV21474 $1,065.00

72 in. Utility Bucket (22.6 cu. ft.) with Edge KV24756 $1,252.00

Page 10 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 43: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Construction Buckets with Edge, 66-78" Bundle

Includes 66", 72", 76", and 78" sizes.Different bucket sizes fit different machine sizes.Price includes a 5% discount from individual buckets' prices.

AT340103 $4,801.00

Construction Buckets with Edge, 72-84" Bundle

Includes 72", 76", 78", and 84" sizes.Different bucket sizes fit different machine sizes.Price includes a 5% discount from individual buckets' prices.

AT340104 $5,071.00

Cutting Edges:

76 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

T223081 View Price

Kits and Accessories:

12 Volt Demonstration Kit

3-pin connector

KV21995 $305.00

Attachment Control

For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.

AT427986 $406.00

Attachment Control Kit

For E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975, 0980,and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.

AT427985 $721.00

Backup Alarm

For use with EH Controls (0950) or (0975)

AT348451 $204.00

Backup Alarm (Foot, Hand Controls)

For use with Foot Controls (0900) or Hand Controls (0925)

AT348456 $204.00

Beacon Warning Light AT431920 $320.00

Block Heater Kit AT427686 $110.00

Bobcat Attachment Harness Adapter Kit

Must have the 14 pin attachment connector already installed

AT417736 $344.00

Cold Start Package AT432105 $355.00

Counterweight, Stackable (Single Set)

Includes 2 - 86 lb weights (39 Kg)

AT348835 $352.00

EH Joystick Performance Package

Factory Code 8395 or kit AT427990 Keyless Start (Sealed Switch Module) isrequired prior to installing EH performance package

Enables the following features:Switchable control patterns between ISO and HSelectable propel aggressivenessCreeper Mode

AT427988 $593.00

Page 11 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 44: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Boom and Bucket speed settings

Engine Air Pre-Cleaner Kit

For use with FT4 Naturally Aspirated Engine (Order code 1305)

AT425360 $457.00

Engine Air Pre-Cleaner Kit

For Turbo Engines (FT4 and Non-Reg); Order codes 1301 or 1310

AT425361 $457.00

Field Kit, Reversing Fan

For S/N 269401 and below.

AT413072 $964.00

Foot Throttle Removal Kit AT374642 $51.00

HD Rear Grille

Provides protection to cooling package

AT398389 $593.00

Hazard Warning Lights AT431921 $127.00

High Spring Effort Joysticks AT433683 $766.00

Horn

For use with Foot Controls (0900) or Hand Controls (0925)

AT348484 $152.00

Horn

For use with EH Controls (0950) or (0975)

AT339797 $115.00

Hydraulic Quick Coupler Adapter Kit

Adapts Highflow Machine Aux Couplers to Operate Low Flow Attachment.

AT428072 $325.00

Joystick Pod Mounted Throttle AT419446 $152.00

Keyless Start (Sealed Switch Module) AT427990 $401.00

Radio, AM/FM/WB with Aux Input AT427984 $510.00

Reversing Fan Kit

For S/N 269402 and above.

AT448244 $834.00

SMV Sign AT427982 $77.00

Severe Duty Door

Includes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.

AT417602 $3,076.00

Severe Duty Door

Includes windshield wiper.For ROPS Canopy units also order AT440395.Required to meet ISO 8084 Forestry Applications.S/N 269402 and above.

AT446334 $3,076.00

Severe Duty Door Hardware and Washer Bottle Kit AT440395 $170.00

Page 12 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 45: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Single Point Lift System AT417891 $1,523.00

Standard Door, Field Kit

S/N 269401 and below.

AT425132 $1,030.00

Standard Door, Field Kit

S/N 269402 and above.

AT446335 $1,030.00

Miscellaneous:

66 in. Bolt-On Cutting Edge

Requires Seven Grade 8 Plow Bolts and Nuts (PB750225)

U16748 View Price

72 in. Bolt-On Cutting Edge T32742 View Price

Operator Environment:

Trim Elbow Pad Field Kit AT417600 $28.00

Tooth Bars:

66 in. Tooth Bar - 7 Teeth KV12294 $470.00

66 in. Tooth Bar for BOCE - 6 Teeth AT347126 $714.00

72 in. Tooth Bar - 7 Teeth KV11598 $510.00

72 in. Tooth Bar for BOCE - 8 Teeth AT347128 $733.00

76 in. Tooth Bar - 8 Teeth AT331906 $525.00

76 in. Tooth Bar for BOCE - 8 Teeth AT347130 $772.00

Wheels and Tires, Four:

12x16.5 10 PR SKS Extra-Wall KV21876 $1,577.00

12x16.5 10 PR Titan HD2000-III KV14674 $1,817.00

Wheels and Tires, Single (Left Hand Only):

10x16.5 10PR Galaxy Hulk, Left AT446723 $496.00

12x16.5 12PR Galaxy Hulk, Left AT446726 $598.00

Wheels and Tires, Single (Right Hand Only):

10x16.5 10PR Galaxy Hulk, Right AT446724 $496.00

10x16.5 8 PR Galaxy "Beefy Baby II" HD AT336800 $371.00

10x16.5 8 PR SKS Extra-Wall Heavy Duty AT332906 $322.00

12x16.5 10 PR SKS Extra-Wall KV23687 $396.00

12x16.5 10 PR Titan HD2000-III KV23689 $468.00

12x16.5 12PR Galaxy Hulk, Right AT446727 $598.00

Page 13 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 46: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

REFERRAL ATTACHMENTS

Description Code PriceG.R. Mfg.:G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales supportand assistance will be the responsibility of G.R. Manufacturing, Inc., and will behandled directly between the Dealer and G.R. Manufacturing, Inc.

G.R. Manufacturing, Inc.4800 Commerce DriveTrussville, Alabama 35173Phone: (800)841-8001Fax: (205)655-8005

Auxiliary Hydraulic Line Quick Coupler AT437326 $180.00

Front Work Lights and Rear Light Guards AT432854 $218.00

Guard, Bucket Cylinder Rod AT406620 $320.00

Level II FOPS Plate

Required to meet ISO 8083 Level 2 Forestry ApplicationsFor use on D and E Series

AT445276 $602.00

Lift Cylinder Hose Guards AT437325 $320.00

Operator Rear Window / Side Window Guards

Required to meet ISO 8084 Forestry ApplicationsNot recommended for use with Hazard Warning Lights

AT372949 $640.00

Rear Grille Guard w/o Side Bumpers AT437324 $980.00

Toe Guard and Door Upgrade Kit

Required to meet ISO 8084 Forestry Applications

AT372950 $492.00

Copyright © 1996-2014 Deere & Company. All Rights Reserved. About Our Site | Privacy and Data | Legal | |

Page 14 of 14

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 47: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Current Date 16Apr2015

326E SKID STEER

326E SKID STEEREquipment for Base MachineEngine:Electronic Injection SystemAuto IdleGlow PlugsAutomatic Engine Shutdownwith AlarmV-Plenum CoolingHydraulic Cool-on-DemandVariable Speed FanDual Element Air CleanerAutomatic Fan Belt TensionerJohn Deere "Cool Gard II"Extended Life Anti-FreezeJohn Deere Plus 50 10w30engine oil5 Micron Primary Fuel Filter25 Gallon (96.1 L) Fuel TankFinal Drive System andBrakes:Four Wheel DriveServo Hydrostatic PumpsFour 100 HD continuous loopchain driveIntegral Automatic Wet-DiskBrake Spring AppliedHydraulic ReleaseGauges and Instruments:Fuel GaugeEngine Coolant TemperatureOperator Selectable LCDDigital Readout:HourmeterEngine RPMBattery VoltageEngine Coolant Temp.Hydraulic Oil Temp.Job ClockService CodesDiagnostic CodesConfiguration Codes

Indicator Warning Lights:Battery Not ChargingHydraulics Locked OutPark Brake IlluminationHydraulic Oil Over Temp2-Speed EngagedAir Filter RestrictionHydraulic Oil FilterRestrictionLap Bar SwitchSeat SwitchDoor Open SwitchEngine PreheatLow Engine Oil PressureAutomatic Engine PreheatElectrical:12-Volt Electrical Battery925ccaAlternator 70 AmpHalogen Work Lights, Frontand RearProgrammable courtesylighting shutoff systemHydraulics:3-Spool Open Center Valve21 gpm (80 L/m) Pump3 Micron Hydraulic Filter10w30 Engine OilJohn Deere Boom andBucket Cylinders withCushioned BoomConnect-under-pressureauxiliary hydraulic couplersLoader Arm, Bucket, &Auxiliary Hydraulic LockoutSystemAuxiliary Hydraulics Lock-outOverrideBoom FloatPerformance Characteristics:Rated Operating Capacity2,700 lbs. (1,225 kg)

Tipping Load 5,400 lbs.(2,449 kg)Bucket Breakout Force7,750lbs. (3,519 kg)Boom Breakout Force5,000lbs. (2,270 kg)Axle Torque 5,680 lbs-ft(7,725 Nm)OperatorProtection/Comfort:FOPS / ROPS Roll-Guard withSide ScreensIn-Cab Boom LockoutSystemAdjustable Lap BarOperator Presence SystemInterlocking Lap Bar andRetractable Seat Belt systemSeat Switch & Lap BarInterlocks for Loader Arm,Bucket, & Auxiliary CircuitsDeluxe Headliner12V power portCell Phone cargo net storageInterior Dome LightingCup HolderGrab Handles for EasyEntry / ExitTop and Rear WindowsWater Shedding DeluxeSeatingConvenient Tie DownsAttachment Coupler:John Deere patented Quik-Tatch system (no greaserequired)Warranty (US and Canada):John Deere StandardWarranty 1 Year UnlimitedHours

Required - You must select one from each category

Page 1 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 48: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

BASE MACHINE

F.O.B. Dubuque, Iowa

Description Code Price326E SKID STEER 8331T $44,221.00

SKID STEER VALUE PACKAGES

PRICE LISTED IS A 10% DISCOUNT FOR OPTIONAL EQUIPMENT-EXCLUDING ENGINES. (Each option's price will be listedon the same line as that option.)

Description Code Price326E Standard Skid Steer

Note: Includes standard equipment

0800 In Base Price

Utility Package With ISO Pattern Joystick Controls

Package includes:EH (ISO Pattern) Joystick Controls (0950)Single-Speed (1025)Turbocharged Engine (1301)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)Standard Base Hydraulics (3000)Less Ride Control (3101)3 in. Seat Belt (4002)Power Quik-Tatch (5001)Canopy - ROPS / FOPS (5200)Mechanical Suspension Seat (Vinyl) (6001)Standard Fan Drive (6500)Horn (6800)Less EH Joystick Performance Package (7101)Backup Alarm (8040)Rear View Mirror (interior cab mount) (8350)Keyless Start (8395)

0815 ($388.00)

Deluxe Cab Package With ISO Pattern Joystick Controls

Package includes:EH (ISO Pattern) Joystick Controls (0950)Two-Speed (1050)Turbocharged Engine (1301)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)Standard Base Hydraulics (3000)Ride Control (3100)3 in. Seat Belt w/ Shoulder Harness (4003)Power Quik-Tatch (5001)Cab Enclosure w/ A/C, Heat, Defrost (5204)Air Suspension Seat (Cloth) (6002)Reversing Fan Drive (6501)Horn (6800)EH Joystick Performance Package (7100)Backup Alarm (8040)Chrome Exhaust (8225)Radio, AM/FM/WB w/ Aux Input (8340)Rear View Mirror (interior cab mount) (8350)Foot Rest w/ Floormat (8380)Keyless Start (8395)

0820 ($1,530.00)

Deluxe Cab Package With ISO Pattern Joystick Controls &Hi-Flow

Package includes:EH (ISO Pattern) Joystick Controls (0950)

0825 ($1,809.00)

Page 2 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 49: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Two-Speed (1050)Turbocharged Engine (1301)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)High Flow Hydraulics (3002)Ride Control (3100)3 in. Seat Belt w/ Shoulder Harness (4003)Power Quik-Tatch (5001)Cab Enclosure w/ A/C, Heat, Defrost (5204)Vinyl, Air-Ride Seat (6003)Reversing Fan Drive (6501)Horn (6800)EH Joystick Performance Package (7100)Backup Alarm (8040)Engine Air Precleaner (8060)Chrome Exhaust (8225)Radio, AM/FM/WB w/ Aux Input (8340)Rear View Mirror (interior cab mount) (8350)HD Louvered Grille (8370)Foot Rest w/ Floormat (8380)Keyless Start (8395)

Utility Package With Switchable Joystick Controls

Package includes:Switchable EH Foot-H-ISO Pattern Joystick Controls (0990)Single-Speed (1025)Turbocharged Engine (1301)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)Standard Hydraulics (3000)Less Ride Control (3101)3 in. Seat Belt (4002)Power Quik-Tatch (5001)Canopy ROPS/FOPS (5200)Mechanical Suspension Seat (vinyl) (6001)Standard Fan Drive (6500)Horn (6800)Less EH Joystick Performance Package (7101)Backup Alarm (8040)Rear View Mirror (interior cab mount) (8350)Keyless Start (8395)

0830 ($690.00)

Deluxe Cab Package With Switchable Joystick Controls

Package includes:Switchable EH Foot-H-ISO Pattern Joystick Controls (0990)Two-Speed (1050)Turbocharged Engine (1301)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)Standard Hydraulics (3000)Ride Control (3100)3 in. Seat Belt w/ Shoulder Harness (4003)Power Quik-Tatch (5001)Cab Enclosure w/ A/C, Heat, Defrost (5204)Air Suspension Seat (cloth) (6002)Reversing Fan Drive (6501)Horn (6800)EH Joystick Performance Package (7100)Backup Alarm (8040)Chrome Exhaust (8225)Radio, AM/FM/WB w/ Aux Input (8340)Rear View Mirror (interior cab mount) (8350)Keyless Start (8395)

0835 ($1,817.00)

Deluxe Cab Package With Switchable Joystick Controls & Hi-Flow

Package includes:Switchable EH Foot-H-ISO Pattern Joystick Controls (0990)

0840 ($2,094.00)

Page 3 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 50: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Two-Speed (1050)Turbocharged Engine (1301)English Operator's Manual & Decals (1501)12x16.5 10 PR Titan HD2000-III (2070)High Flow Hydraulics (3002)Ride Control (3100)3 in. Seat Belt w/ Shoulder Harness (4003)Power Quik-Tatch (5001)Cab Enclosure w/ A/C, Heat, Defrost (5204)Vinyl, Air-Ride Seat (6003)Reversing Fan Drive (6501)Horn (6800)EH Joystick Performance Package (7100)Backup Alarm (8040)Engine Air Precleaner (8060)Chrome Exhaust (8225)Radio, AM/FM/WB w/ Aux Input (8340)Rear View Mirror (interior cab mount) (8350)HD Louvered Grille (8370)Keyless Start (8395)

ENGINE

Description Code PriceEngine - Turbocharged

Required for the United States. Not available for export to markets without ultra-low sulfur fuel. This engine is certified to FT4 EPA emission standards.

Yamnar 4TNV98CT 3.3L4 Cylinder Turbo-Charged72 Gross hp (53.7 kW)69 Net hp (51.4 kW)

1301 $2,613.00

Engine - Turbocharged

Not available for the United States. This engine may only be used in markets thatare not subject to current U.S. EPA or EU non-road emission regulations. Thisengine is certified to IT4 / Stage IIIA emissions.

Cold Start Required for Extreme High Altitude.

1310 In Base Price

OPERATOR STATION

Description Code PriceCanopy - ROPS / FOPS 5200 In Base Price

Canopy - ROPS / FOPS with Severe Duty Door

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003).

5201 $2,768.00

Cab Enclosure with Air-Conditioning, Heat and Defrost

Glass Front Door w/ Wiper and Glass Slide Windows. Requires 2-inch Seat Beltwith Shoulder Harness (4001) or 3-inch Seat Belt with Shoulder Harness (4003).

5204 $4,608.00

Cab Enclosure with Air-Conditioning, Heat, Defrost, andSevere Duty Door

Polycarbonate Front Door w/ Wiper and Glass Side Windows.Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003).

5205 $6,672.00

SEAT

Description Code Price

Page 4 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 51: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Seat (Vinyl) 6000 ($417.00)

Mechanical Suspension Seat (Vinyl) 6001 In Base Price

Air Suspension Seat (Cloth)

For use with Cab Enclosure/Severe Duty Door (5204 & 5205).

6002 $452.00

Vinyl, Air-Ride Seat 6003 $452.00

SEAT BELTS

Description Code Price2-Inch Seat Belt

For use with Canopy - ROPS / FOPS (5200)

4000 In Base Price

2-Inch Seat Belt with Shoulder Harness 4001 $212.00

3-Inch Seat Belt

Required in British Columbia and California; construction industry safety orders useof 3 inch wide webbing seat beltFor use with Canopy - ROPS / FOPS (5200)

4002 $164.00

3-Inch Seat Belt with Shoulder Harness 4003 $379.00

CONTROLS

Description Code PriceFoot Controls 0900 ($2,681.00)

Hands Only Controls 0925 ($1,842.00)

E-H (ISO Pattern) Joystick Controls 0950 In Base Price

EH (H Pattern) Joystick Controls

High Spring Efforts

0975 $212.00

EH Foot and Joystick Controls 0980 $1,328.00

Switchable EH Foot-H-ISO Pattern Joystick Controls

Code 8395 Keyless Start (Sealed Switch Module) is required.

Three way Switchable Controls between EH Foot Control, ISO Joystick Control, orH-Pattern Joystick Control modes.

Includes Switchable Accelerator/Decelerator with right side foot pedal whenoperating in ISO or H-Pattern Joystick Control mode.

0990 $3,020.00

JOYSTICK PERFORMANCE

Description Code PriceEH Joystick Performance Package

Code 8395 Keyless Start (Sealed Switch Module) is required.

Switchable control patterns between ISO and H (If ordered with code 0950 or0975)Selectable propel aggressiveness

7100 $798.00

Page 5 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 52: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Creeper ModeBoom and Bucket speed settings12V 3 Pin and 14 Pin Attachment Control Harness

Less EH Joystick Performance Package 7101 In Base Price

TRANSMISSION

Description Code PriceSingle-Speed 1025 In Base Price

Two-Speed 1050 $2,508.00

HYDRAULIC OPTIONS

Description Code PriceStandard Hydraulics

Pump Flow = 21 gpm

3000 In Base Price

Standard Hydraulics and Hydraulic Self-Leveling Up

Pump Flow = 21 gpm

Order Code 3101 (Less Ride Control) is required; Order Code 3100 (Ride Control)is NOT available with this option.

3001 $575.00

High Flow Hydraulics

Pump Flow = 29 gpm

Includes 1/2 in Auxiliary coupler sizes.

3002 $1,830.00

High Flow Hydraulics and Hydraulic Self-Leveling Up

Pump Flow = 29 gpm

Order Code 3101 (Less Ride Control) is required; Order Code 3100 (Ride Control)is NOT available with this option.

Includes 1/2 in Auxiliary coupler sizes.

3003 $2,408.00

RIDE CONTROL

Description Code PriceRide Control

Code 8395 Keyless Start (Sealed Switch Module) is required.

3100 $995.00

Less Ride Control 3101 In Base Price

QUIK-TATCH

Description Code PriceManual Quik-Tatch 5000 In Base Price

Power Quik-Tatch 5001 $834.00

COOLING FAN

Description Code Price

Page 6 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 53: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Standard Fan Drive 6500 In Base Price

Reversing Fan Drive 6501 $830.00

HORN

Description Code PriceHorn 6800 $140.00

Less Horn 6801 In Base Price

WHEELS AND TIRES

Description Code Price12x16.5 10 PR Titan HD2000-III

Gives 70.3 in. Skid Steer width at narrow settingGives 73.2 in. Skid Steer width at wide setting

2070 $2,147.00

12x16.5 10 PR SKS Extra-Wall

Gives 70.0 in. Skid Steer width at narrow settingGives 73.3 in. Skid Steer width at wide setting

2310 $1,636.00

14x17.5 14 PR Titan HD2000-II

No narrow setting possible

2320 $3,362.00

14x17.5 12 PR SKS Extra-Wall

For use primarily in dirt applications.No narrow setting possible.

2330 $2,887.00

12x16.5 Treaded Brawler SolidFlex

Gives 73.3 in. Skid Steer width at wide settingNot Compatible with Tracks

2410 $4,300.00

14x17.5 Treaded Brawler SolidFlex

Gives 73.5 in. Skid Steer width at wide settingNot Compatible with Tracks

2420 $5,700.00

12x16.5 12 PR Galaxy Hulk 2440 $2,470.00

14x17.5 14 PR Galaxy Hulk 2450 $3,865.00

OPERATOR MANUAL & DECALS

Description Code PriceEnglish Operator's Manual & Decals

For use with FT4 Engine

1501 No Charge

English Operator's Manual & Decals for Canada

Canada onlyFor use with IT4/Stage IIIB Engine

1502 No Charge

English Operator's Manual & No Text Decals

Not for Canada

1503 No Charge

Page 7 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 54: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

For use with IT4/Stage IIIB Engine

French Operator's Manual & Decals

For use with FT4 Engine

1510 No Charge

French Operator's Manual & Decals for Canada

Canada onlyFor use with IT4/Stage IIIB Engine

1511 No Charge

French Operator's Manual & No Text Decals

Not for CanadaFor use with IT4/Stage IIIB Engine

1512 No Charge

Spanish Operator's Manual & Decals

For use with FT4 Engine

1515 No Charge

Spanish Operator's Manual & No Text Decals

Not for CanadaFor use with IT4/Stage IIIB Engine

1516 No Charge

Optional - Select as desiredKITS AND ACCESSORIES - FACTORY INSTALLED

Description Code PriceBackup Alarm 8040 $105.00

Cold Start Package

Includes Hydraulic Bypass, and Block Heater. (110 volt)

8050 $303.00

Cold Start Package

Includes Hydraulic Bypass, and Block Heater. (220 volt)

8051 $303.00

Engine Air Precleaner 8060 $455.00

Hazard Warning Lights 8075 $159.00

Chrome Exhaust 8225 $328.00

Counterweight, Stackable (Single Set)

Includes 2 - 86 lb weights (39 Kg)

8300 $349.00

Counterweight, Stackable (Second Set)

Includes 2 - 86 lb weights (39 Kg)Requires Counterweight, Stackable (Single Set) (8300)

8305 $349.00

Counterweight, Stackable (Third Set)

Includes 2 - 86 lb weights (39 Kg)Requires Counterweight, Stackable (Single Set) (8300) and Counterweight,Stackable (Second Set) (8305)

8310 $349.00

Radio, AM/FM/WB with Aux Input

For use with enclosed cab only: codes 5204 & 5205

8340 $540.00

Rear View Mirror (Interior cab mount) 8350 $90.00

Page 8 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 55: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

HD Rear Grille

Provides protection to cooling package

8370 $486.00

Foot Rest with Floormat

For use with E-H (ISO Pattern) Joystick Controls (0950), or E-H (H Pattern)Joystick Controls (0975).

8380 $144.00

Floormat

For use with E-H (ISO Pattern) Joystick Controls (0950), or E-H (H Pattern)Joystick Controls (0975).

8390 $122.00

Switchable Accelerator / Decelerator

Turns existing foot throttle in to a decelerating pedal.

Requires order code 8395 (Keyless Start) and 0950 (E-H (ISO Pattern) JoystickControls) or 0975 (EH (H-Pattern) Joystick Controls).

8392 $237.00

Keyless Start (Sealed Switch Module)

Includes: programmable machine security code system

8395 $399.00

BUCKETS: (REFER TO BUCKET COMPATABILITY CHART)

See Attachments for Multi-Purpose Buckets

Description Code Price76 in. HD Construction Bucket (18.5 cu. ft.) 9045 $1,096.00

76 in. HD Construction Bucket (18.5 cu. ft.) with Edge 9046 $1,319.00

76 in. HD Tooth Bucket (18.5 cu. ft.) 9215 $1,322.00

78 in. HD Construction Bucket (19.4 cu. ft.) 9051 $1,149.00

78 in. HD Construction Bucket (19.4 cu. ft.) with Edge 9052 $1,339.00

78 in. HD Tooth Bucket (19.4 cu. ft.) 9221 $1,353.00

78 in. HD Utility Bucket (24.5 cu. ft.) 9330 $1,138.00

78 in. HD Utility Bucket (24.5 cu. ft.) with Edge 9331 $1,339.00

84 in. HD Construction Bucket (21.0 cu. ft.) 9061 $1,286.00

84 in. HD Construction Bucket (21.0 cu. ft.) with Edge 9062 $1,422.00

84 in. HD Tooth Bucket (21.0 cu. ft.) 9231 $1,447.00

84 in. HD Utility Bucket (27.0 cu. ft.) 9340 $1,205.00

84 in. HD Utility Bucket (27.0 cu. ft.) with Edge 9341 $1,500.00

EXPORT CODES

Description Code Price

Page 9 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 56: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Australian Compliance Certificate and Hearing ProtectionCaution Label

9280 No Charge

SPECIAL EQUIPMENT - ORDER AS DESIRED

Description Code PriceRust Preventative

Coating protects exposed unpainted surfaces from road salt during shipment.Applied at PSL.Not for use with export shipments as export pricing includes rust prevention.

9909 $160.00

DEALER-INSTALLED KITS

Description Code PriceBUCKETS:

76 in. HD Construction Bucket (18.5 cu. ft.) AT329506 $1,096.00

76 in. HD Construction Bucket (18.5 cu. ft.) with Edge AT329644 $1,319.00

76 in. HD Tooth Bucket (18.5 cu. ft.) AT329580 $1,322.00

78 in. HD Construction Bucket (19.4 cu. ft.) with Edge AT322310 $1,339.00

78 in. HD Tooth Bucket (19.4 cu. ft.) AT321180 $1,353.00

78 in. HD Utility Bucket (24.5 cu. ft.) KV22802 $1,138.00

78 in. HD Utility Bucket (24.5 cu. ft.) with Edge KV24757 $1,339.00

84 in. HD Construction Bucket (21.0 cu. ft.) AT319181 $1,286.00

84 in. HD Construction Bucket (21.0 cu. ft.) with Edge AT322311 $1,422.00

84 in. HD Tooth Bucket (21.0 cu. ft.) AT321181 $1,447.00

84 in. HD Utility Bucket (27.0 cu. ft.) KV21470 $1,205.00

84 in. HD Utility Bucket (27.0 cu. ft.) with Edge KV24758 $1,500.00

Buckets:

72 in. Construction Bucket (17.8 cu. ft.) AT319177 $1,030.00

72 in. Construction Bucket (17.8 cu. ft.) with Edge AT322309 $1,231.00

72 in. Foundry Bucket (16.0 cu. ft.) KV11637 $956.00

72 in. Tooth Bucket (17.8 cu. ft.) AT321177 $1,231.00

72 in. Utility Bucket (22.6 cu. ft.) KV21474 $1,065.00

72 in. Utility Bucket (22.6 cu. ft.) with Edge KV24756 $1,252.00

78 in. HD Construction Bucket (19.4 cu. ft.) AT319180 $1,149.00

78 in. HD Foundry Bucket (17.8 cu. ft.) KV22758 $1,040.00

Page 10 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 57: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Construction Buckets with Edge, 66-78" Bundle

Includes 66", 72", 76", and 78" sizes.Different bucket sizes fit different machine sizes.Price includes a 5% discount from individual buckets' prices.

AT340103 $4,801.00

Construction Buckets with Edge, 72-84" Bundle

Includes 72", 76", 78", and 84" sizes.Different bucket sizes fit different machine sizes.Price includes a 5% discount from individual buckets' prices.

AT340104 $5,071.00

Cutting Edges:

76 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

T223081 View Price

78 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

KV12758 View Price

84 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

KV12471 View Price

Kits and Accessories:

12 Volt Demonstration Kit

3-pin connector

KV21995 $305.00

Attachment Control

For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.

AT427986 $406.00

Attachment Control Kit

For E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975, 0980,and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.

AT427985 $721.00

Backup Alarm

For use with EH Controls (0950) or (0975)

AT348451 $204.00

Beacon Warning Light AT431920 $320.00

Block Heater Kit AT427686 $110.00

Bobcat Attachment Harness Adapter Kit

Must have the 14 pin attachment connector already installed

AT417736 $344.00

Counterweight, Stackable (Single Set)

Includes 2 - 86 lb weights (39 Kg)

AT348835 $352.00

EH Joystick Performance Package

Factory Code 8395 or kit AT427990 Keyless Start (Sealed Switch Module) isrequired prior to installing EH performance package

Enables the following features:Switchable control patterns between ISO and H

AT427988 $593.00

Page 11 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 58: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Selectable propel aggressivenessCreeper ModeBoom and Bucket speed settings

Engine Air Pre-Cleaner Kit AT425357 $457.00

Field Kit, Reversing Fan

For S/N 269401 and below.

AT413082 $964.00

Foot Throttle Removal Kit AT410246 $51.00

HD Rear Grille

Provides protection to cooling package

AT398389 $593.00

Hazard Warning Lights AT431921 $127.00

High Spring Effort Joysticks AT433683 $766.00

Horn

For use with EH Controls (0950) or (0975)

AT339797 $115.00

Hydraulic Quick Coupler Adapter Kit

Adapts Highflow Machine Aux Couplers to Operate Low Flow Attachment.

AT428072 $325.00

Joystick Pod Mounted Throttle AT419446 $152.00

Keyless Start (Sealed Switch Module) AT427990 $401.00

Radio, AM/FM/WB with Aux Input AT427984 $510.00

Reversing Fan Kit

For S/N 269402 and above.

AT448244 $834.00

SMV Sign AT427982 $77.00

Severe Duty Door

Includes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.

AT417602 $3,076.00

Severe Duty Door

Includes windshield wiper.For ROPS Canopy units also order AT440395.Required to meet ISO 8084 Forestry Applications.S/N 269402 and above.

AT446334 $3,076.00

Severe Duty Door Hardware and Washer Bottle Kit AT440395 $170.00

Single Point Lift System AT417891 $1,523.00

Standard Door, Field Kit

S/N 269401 and below.

AT425132 $1,030.00

Standard Door, Field Kit AT446335 $1,030.00

Page 12 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 59: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

S/N 269402 and above.

Miscellaneous:

72 in. Bolt-On Cutting Edge T32742 View Price

Operator Environment:

Trim Elbow Pad Field Kit AT417600 $28.00

Tooth Bars:

72 in. Tooth Bar - 7 Teeth KV11598 $510.00

72 in. Tooth Bar for BOCE - 8 Teeth AT347128 $733.00

76 in. Tooth Bar - 8 Teeth AT331906 $525.00

76 in. Tooth Bar for BOCE - 8 Teeth AT347130 $772.00

78 in. Tooth Bar - 8 Teeth KV12296 $559.00

78 in. Tooth Bar for BOCE - 7 Teeth AT347132 $803.00

84 in. Tooth Bar - 8 Teeth KV12298 $680.00

84 in. Tooth Bar for BOCE - 9 Teeth AT347135 $827.00

Wheels and Tires, Four:

12x16.5 10 PR SKS Extra-Wall KV21876 $1,577.00

12x16.5 10 PR Titan HD2000-III KV14674 $1,817.00

14x17.5 12 PR SKS Extra-Wall KV21887 $2,418.00

14x17.5 14 PR Titan HD2000-III KV21892 $2,959.00

Wheels and Tires, Single (Left Hand Only):

12x16.5 12PR Galaxy Hulk, Left AT446726 $598.00

14x17.5 14PR Galaxy Hulk, Left AT446729 $923.00

Wheels and Tires, Single (Right Hand Only):

12x16.5 10 PR SKS Extra-Wall KV23687 $396.00

12x16.5 10 PR Titan HD2000-III KV23689 $468.00

12x16.5 12PR Galaxy Hulk, Right AT446727 $598.00

14x17.5 12 PR SKS Extra-Wall KV23690 $615.00

14x17.5 14 PR Titan HD2000-III KV23691 $753.00

14x17.5 14PR Galaxy Hulk, Right AT446730 $923.00

REFERRAL ATTACHMENTS

Page 13 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 60: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Description Code PriceG.R. Mfg.:G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales supportand assistance will be the responsibility of G.R. Manufacturing, Inc., and will behandled directly between the Dealer and G.R. Manufacturing, Inc.

G.R. Manufacturing, Inc.4800 Commerce DriveTrussville, Alabama 35173Phone: (800)841-8001Fax: (205)655-8005

Auxillary Hydraulic Line Quick Coupler Guard AT432855 $220.00

Bottom Opening Cover Plates AT432853 $350.00

Front Work Lights and Rear Light Guards AT432854 $218.00

Guard, Bucket Cylinder Rod AT406619 $320.00

Guard, Bucket Cylinder Rod AT406618 $320.00

Level II FOPS Plate

Required to meet ISO 8083 Level 2 Forestry ApplicationsFor use on D and E Series

AT445276 $602.00

Lift Cylinder Hose Guards AT372956 $420.00

Operator Rear Window / Side Window Guards

Required to meet ISO 8084 Forestry ApplicationsNot recommended for use with Hazard Warning Lights

AT372949 $640.00

Rear Deflector and Bumper AT432858 $1,962.00

Rear Grille Guard w/o Side Bumpers AT432857 $1,220.00

Rear Hydraulic Circuit

Standard Flow Only - 25 gpm maximum.Will not work on Hand Control Units.

AT432860 $3,200.00

Rubber Boom Pocket Debris Guards AT388938 $340.00

Severe Duty Package

Package Includes: Rear Deflector/Bumper, Exh Hood Opening Gd., FOPS, LiftCyl Hose Gds., Aux.Hyd Line Quick Gd., Oper Rear & Side Screens, Toe Gd.,Bottom Gds., Front & Rear Wrk Light Gds., Rubber Boom Pocket Gd.

AT433164 $5,052.00

Toe Guard and Door Upgrade Kit

Required to meet ISO 8084 Forestry Applications

AT372950 $492.00

Winch, Rear Mounted

Requires Rear Deflector/Bumper Kit.Will not work on Hand Control Units.Not for use with Ride Control or Hydraulic Self-Level.

AT432859 $9,120.00

Page 14 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 61: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Includes Rear Hydraulic Circuit Kit.

Copyright © 1996-2014 Deere & Company. All Rights Reserved. About Our Site | Privacy and Data | Legal | |

Page 15 of 15

4/16/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 62: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Current Date 13Apr2015

328E SKID STEER

Equipment for Base MachineEngine: Yanmar 4TNV94CHT 3.1Lmeets Interim Tier 4emissions 4 Cylinder Turbo-Charged 86 Gross H.P. 83 Net H.P. Electronic Injection System Auto Idle Glow Plugs Hydraulic Cool-on-DemandVariable Speed Fan V-Plenum Cooling Dual Element Air Cleaner Automatic Fan BeltTensioner John Deere "Cool Gard II"Extended Life Anti-Freeze John Deere Plus 50 10w30Engine Oil 5 Micron Primary Fuel Filter 26 Gallon (98.4 L) FuelTankFinal Drive System andBrake: Servo Hydrostatic Pumps Four Wheel Drive Two 100 HD Endless Chain Integral Automatic Wet-Disk

Brake Spring AppliedHydraulic ReleaseGauges and Instruments: Fuel Gauge Engine Coolant TemperatureGauge Operator Selectable LCD Digital Readout: Hourmeter Engine RPM Battery Voltage Engine Coolant Temp. Hydraulic Oil Temp. Job Clock Service Codes

Configuration Codes Indicator Warning Lights: Battery Not Charging Hydraulics Locked Out Park Brake Illumination Hydraulic Oil Over Temp. 2-Speed Engaged Air Filter Restriction Hydraulic Oil FilterRestriction Lap Bar Switch Seat Switch Door Open Switch Engine Preheat Low Engine Oil Pressure Automatic Engine Preheat Automatic Engine Shutdownwith Alarm

Electrical: 12-Volt Electrical Battery925 cca Alternator 70 Amp Halogen Work Lights, Frontand Rear Time delayed courtesylighting shutoff systemHydraulics: 3-Spool Open Center Valve 21 gpm (80 L/m) Pump 3 Micron Hydraulic Filter 10w30 Engine Oil John Deere Boom andBucket Cylinders withCushioned Boom Cylinders Auxiliary Hydraulics withFlat Faced Connect-under-pressure Couplers Loader Arm, Bucket, &Auxiliary Hydraulic LockoutSystem Auxiliary Hydraulics Lock-out Override Boom Float

Performance Characteristics: Rated Operating Capacity2,800 lb. (1,271 kg) Tipping Load 5,600 lb.(2,542 kg) Bucket Breakout Force10,300 lb. (4,763 kg) Boom Breakout Force 5,000lbs. (2,270 kg) Axle Torque 6,235 lbs-ft(8,480 Nm)

OperatorProtection/Comfort: FOPS / ROPS Roll-Guardwith Side Screens In-Cab Boom LockoutSystem Interlocking Lap Bar andRetractable Seat Belt system Adjustable Lap Bar Operator Presence SystemSeat Switch & Lap BarInterlocks for Loader Arm,Bucket, & AuxiliaryCircuits Deluxe Headliner 12V power port Cell Phone cargo netstorage Interior Dome Lighting Cup Holder Grab Handles for EasyEntry / Exit Top and Rear Windows Water Shedding DeluxeVinyl Seat Convenient Tie Downs

Attachment Coupler: John Deere patented Quik-Tatch system (no greaserequired)

Warranty (US and Canada):

Page 1 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 63: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Diagnostic Codes John Deere StandardWarranty 1 Year UnlimitedHours

Required - You must select one from each categoryBASE MACHINE

F.O.B. Dubuque, Iowa

Description Code Price328E SKID STEER 8390T $48,561.00

SKID STEER VALUE PACKAGES

PRICE LISTED IS A 10% DISCOUNT FOR OPTIONAL EQUIPMENT-EXCLUDING ENGINES. (Each option's price will be listedon the same line as that option.)

Description Code Price328E Standard Skid Steer

Note: Includes standard equipment

0800 In Base Price

Utility Package With ISO Pattern Joystick Controls

Package includes:* EH (ISO Pattern) Joystick Controls (0950)* Single-Speed (1025)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* Standard Base Hydraulics (3000)* Ride Control (3100)* 3 in. Seat Belt (4002)* Power Quik-Tatch (5001)* Canopy - ROPS / FOPS (5200)* Mechanical Suspension Seat (Vinyl) (6001)* Standard Fan Drive (6500)* Horn (6800)* Less EH Joystick Performance Package (7101)* Backup Alarm (8040)* Rear View Mirror (interior cab mount) (8350)* Keyless Start (8395)

0815 ($609.00)

Deluxe Cab Package With ISO Pattern Joystick Controls

Package includes:* EH (ISO Pattern) Joystick Controls (0950)* Two Speed (1050)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* Standard Base Hydraulics (3000)* Ride Control (3100)* 3 in. Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5001)* Cab Enclosure with Heat, Defrost, & Air Conditioning (5204)* Air Suspension Seat (Cloth) (6002)* Standard Fan Drive (6500)* Horn (6800)* EH Joystick Performance Package (7100)* Backup Alarm (8040)* Chrome Exhaust (8225)* Radio AM/FM/WB W/ Aux Input (8340)* Rear View Mirror (interior cab mount) (8350)* Foot Rest with Floormat (8380)

0820 ($1,568.00)

Page 2 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 64: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

* Keyless Start (8395)

Deluxe Cab Package With ISO Pattern Joystick Controls &Hi-Flow

Package includes:* EH (ISO Pattern) Joystick Controls (0950)* Two Speed (1050)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* High Flow Hydraulics (3002)* Ride Control (3100)* 3 in. Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5001)* Cab Enclosure with Heat, Defrost, & Air Conditioning (5204)* Air Suspension Seat (Vinyl) (6003)* Reversing Fan Drive (6501)* Horn (6800)* EH Joystick Performance Package (7100)* Backup Alarm (8040)* Engine Air Precleaner (8060)* Chrome Exhaust (8225)* Radio AM/FM/WB W/ Aux Input (8340)* Rear View Mirror (interior cab mount) (8350)* HD Rear Grille (8370)* Foot Rest with Floormat (8380)* Keyless Start (8395)

0825 ($1,928.00)

Utility Package With Switchable Joystick Controls

Package includes:* Switchable EH Foot-H-ISO Pattern Joystick Controls (0990)* Single-Speed (1025)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* Standard Hydraulics (3000)* Ride Control (3100)* 3 in. Seat Belt (4002)* Power Quik-Tatch (5001)* Canopy - ROPS/FOPS (5200)* Mechanical Suspention Seat (Vinyl) (6001)* Standard Fan Drive (6500)* Horn (6800)* Less EH Joystick Performance Package (7101)* Backup Alarm (8040)* Rear View Mirror (interior cab mount) (8350)* Keyless Start (8395)

0830 ($911.00)

Deluxe Cab Package With Switchable Joystick Controls

Package includes:* Switchable EH Foot-H-ISO Pattern Joystick Controls (0990)* Two Speed (1050)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* Standard Base Hydraulics (3000)* Ride Control (3100)* 3 in. Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5001)* Cab Enclosure with Heat, Defrost, & Air Conditioning (5204)* Air Suspension Seat (Cloth) (6002)* Standard Fan Drive (6500)* Horn (6800)* EH Joystick Performance Package (7100)* Backup Alarm (8040)* Chrome Exhaust (8225)* Radio AM/FM/WB W/ Aux Input (8340)* Rear View Mirror (interior cab mount) (8350)* Keyless Start (8395)

0835 ($1,856.00)

Deluxe Cab Package With Switchable Joystick Controls & Hi- 0840 ($2,216.00)

Page 3 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 65: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Flow

Package includes:* Switchable EH Foot-H-ISO Pattern Joystick Controls (0990)* Two Speed (1050)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* High Flow Hydraulics (3002)* Ride Control (3100)* 3 in. Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5001)* Cab Enclosure with Heat, Defrost, & Air Conditioning (5204)* Air Suspension Seat (Vinyl) (6003)* Reversing Fan Drive (6501)* Horn (6800)* EH Joystick Performance Package (7100)* Backup Alarm (8040)* Engine Air Precleaner (8060)* Chrome Exhaust (8225)* Radio AM/FM/WB W/ Aux Input (8340)* Rear View Mirror (interior cab mount) (8350)* HD Rear Grille (8370)* Keyless Start (8395)

ENGINE

Description Code PriceEngine - Turbocharged 1301 $2,169.00

OPERATOR STATION

Description Code PriceCanopy - ROPS / FOPS 5200 In Base Price

Canopy - ROPS / FOPS with Severe Duty Door

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003).

5201 $2,768.00

Cab Enclosure with Air-Conditioning, Heat and Defrost

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003)

5204 $4,608.00

Cab Enclosure with Air-Conditioning, Heat, Defrost, andSevere Duty Door

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003)

5205 $6,672.00

SEAT

Description Code PriceSeat (Vinyl) 6000 ($417.00)

Mechanical Suspension Seat (Vinyl) 6001 In Base Price

Air Suspension Seat (Cloth)

For use with Cab Enclosure/Severe Duty Door (5204 & 5205).

6002 $452.00

Vinyl, Air-Ride Seat 6003 $452.00

SEAT BELTS

Page 4 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 66: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Description Code Price2-Inch Seat Belt

For use with Canopy - ROPS / FOPS (5200)

4000 In Base Price

2-Inch Seat Belt with Shoulder Harness 4001 $212.00

3-Inch Seat Belt

Required in British Columbia and California; construction industry safety orders useof 3 inch wide webbing seat beltFor use with Canopy - ROPS / FOPS (5200)

4002 $164.00

3-Inch Seat Belt with Shoulder Harness 4003 $379.00

CONTROLS

Description Code PriceE-H (ISO Pattern) Joystick Controls 0950 In Base Price

EH (H Pattern) Joystick Controls

High Spring Efforts

0975 $212.00

EH Foot and Joystick Controls 0980 $1,328.00

Switchable EH Foot-H-ISO Pattern Joystick Controls

Code 8395 Keyless Start (Sealed Switch Module) is required.

Three way Switchable Controls between EH Foot Control, ISO Joystick Control, orH-Pattern Joystick Control modes.

Includes Switchable Accelerator/Decelerator with right side foot pedal whenoperating in ISO or H-Pattern Joystick Control mode.

0990 $3,020.00

JOYSTICK PERFORMANCE

Description Code PriceEH Joystick Performance Package

Code 8395 Keyless Start (Sealed Switch Module) is required.

Switchable control patterns between ISO and H (If ordered with code 0950 or0975)Selectable propel aggressivenessCreeper ModeBoom and Bucket speed settings12V 3 Pin and 14 Pin Attachment Control Harness

7100 $798.00

Less EH Joystick Performance Package 7101 In Base Price

TRANSMISSION

Description Code PriceSingle-Speed 1025 In Base Price

Two-Speed 1050 $2,508.00

HYDRAULIC OPTIONS

Description Code Price

Page 5 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 67: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Standard Hydraulics

Pump Flow = 21 gpm

3000 In Base Price

Standard Hydraulics and Hydraulic Self-Leveling Up

Pump Flow = 21 gpm

Note - Order Code 3101 (Less Ride Control) is required; Order Code 3100 (RideControl) is NOT available with this option.

3001 $575.00

High Flow Hydraulics

Pump Flow = 35 gpm.

Includes 1/2 in Auxiliary coupler sizes.

3002 $1,830.00

High Flow Hydraulics and Hydraulic Self-Leveling Up

Pump Flow = 35 gpm

Note - Order Code 3101 (Less Ride Control) is required; Order Code 3100 (RideControl) is NOT available with this option.

Includes 1/2 in Auxiliary coupler sizes.

3003 $2,408.00

RIDE CONTROL

Description Code PriceRide Control

Code 8395 Keyless Start (Sealed Switch Module) is required.

3100 $995.00

Less Ride Control 3101 In Base Price

QUIK-TATCH

Description Code PriceManual Quik-Tatch 5000 In Base Price

Power Quik-Tatch 5001 $834.00

COOLING FAN

Description Code PriceStandard Fan Drive 6500 In Base Price

Reversing Fan Drive 6501 $830.00

HORN

Description Code PriceHorn 6800 $140.00

Less Horn 6801 In Base Price

WHEELS AND TIRES

Description Code Price

Page 6 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 68: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

14x17.5 12 PR SKS Extra-Wall

For use primarily in dirt applications.No narrow setting possible.

2330 $2,887.00

14x17.5 14 PR Titan HD2000-II

No narrow setting possible

2320 $3,362.00

14x17.5 Treaded Brawler SolidFlex

Gives 73.5 in. Skid Steer width at wide settingNot Compatible with Tracks

2420 $5,700.00

12x16.5 10 PR SKS Extra-Wall

Gives 70.0 in. Skid Steer width at narrow settingGives 73.3 in. Skid Steer width at wide setting

2310 $1,644.00

12x16.5 10 PR Titan HD2000-III

Gives 70.3 in. Skid Steer width at narrow settingGives 73.2 in. Skid Steer width at wide setting

2070 $2,158.00

12x16.5 Treaded Brawler SolidFlex

Gives 73.3 in. Skid Steer width at wide settingNot Compatible with Tracks

2410 $4,300.00

14x17.5 14 PR Galaxy Hulk 2450 $3,865.00

OPERATOR MANUAL & DECALS

Description Code PriceEnglish Operator's Manual & Decals

For use with FT4 Engine

1501 No Charge

French Operator's Manual & Decals

For use with FT4 Engine

1510 No Charge

Spanish Operator's Manual & Decals

For use with FT4 Engine

1515 No Charge

Optional - Select as desiredKITS AND ACCESSORIES - FACTORY INSTALLED

Description Code PriceBackup Alarm 8040 $105.00

Cold Start Package

Includes Heavy Duty 925cca Battery, Hydraulic Bypass, and Block Heater

8050 $303.00

Engine Air Precleaner 8060 $455.00

Hazard Warning Lights 8075 $159.00

Chrome Exhaust 8225 $328.00

Counterweight, Stackable (Single Set) 8300 $349.00

Page 7 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 69: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Includes 2 - 86 lb weights (39 Kg)

Counterweight, Stackable (Second Set)

Includes 2 - 86 lb weights (39 Kg)Requires Counterweight, Stackable (Single Set) (8300)

8305 $349.00

Counterweight, Stackable (Third Set)

Includes 2 - 86 lb weights (39 Kg)Requires Counterweight, Stackable (Single Set) (8300) and Counterweight,Stackable (Second Set) (8305)

8310 $349.00

Radio, AM/FM/WB with Aux Input

For use with enclosed cab only: codes 5204 & 5205

8340 $540.00

Rear View Mirror (Interior cab mount) 8350 $90.00

HD Rear Grille

Provides protection to cooling package.

8370 $486.00

Foot Rest with Floormat

For use with E-H (ISO Pattern) Joystick Controls (0950), or E-H (H Pattern)Joystick Controls (0975).

8380 $144.00

Floormat

For use with E-H (ISO Pattern) Joystick Controls (0950), or E-H (H Pattern)Joystick Controls (0975).

8390 $122.00

Switchable Accelerator / Decelerator

Turns existing foot throttle in to a decelerating pedal.

Requires order code 8395 (Keyless Start) and 0950 (E-H (ISO Pattern) JoystickControls) or 0975 (EH (H-Pattern) Joystick Controls).

8392 $237.00

Keyless Start (Sealed Switch Module)

Includes: programmable machine security code system

8395 $399.00

BUCKETS: (REFER TO BUCKET COMPATABILITY CHART)

See Attachments for Multi-Purpose Buckets

Description Code Price78 in. HD Construction Bucket (19.4 cu. ft.) 9051 $1,149.00

78 in. HD Construction Bucket (19.4 cu. ft.) with Edge 9052 $1,339.00

78 in. HD Tooth Bucket (19.4 cu. ft.) 9221 $1,353.00

78 in. HD Utility Bucket (24.5 cu. ft.) 9330 $1,138.00

78 in. HD Utility Bucket (24.5 cu. ft.) with Edge 9331 $1,339.00

84 in. HD Construction Bucket (21.0 cu. ft.) 9061 $1,286.00

84 in. HD Construction Bucket (21.0 cu. ft.) with Edge 9062 $1,422.00

Page 8 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 70: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

84 in. HD Tooth Bucket (21.0 cu. ft.) 9231 $1,447.00

84 in. HD Utility Bucket (27.0 cu. ft.) 9340 $1,205.00

84 in. HD Utility Bucket (27.0 cu. ft.) with Edge 9341 $1,500.00

EXPORT CODES

Description Code PriceAustralian Compliance Certificate and Hearing ProtectionCaution Label

9280 No Charge

SPECIAL EQUIPMENT - ORDER AS DESIRED

Description Code PriceRust Preventative

Coating protects exposed unpainted surfaces from road salt during shipment.Applied at PSL.Not for use with export shipments as export pricing includes rust prevention.

9909 $160.00

DEALER-INSTALLED KITS

Description Code PriceBUCKETS:See Attachments for Multi-Purpose Buckets

78 in. HD Construction Bucket (19.4 cu. ft.) with Edge AT322310 $1,339.00

78 in. HD Tooth Bucket (19.4 cu. ft.) AT321180 $1,353.00

78 in. HD Utility Bucket (24.5 cu. ft.) KV22802 $1,138.00

78 in. HD Utility Bucket (24.5 cu. ft.) with Edge KV24757 $1,339.00

84 in. HD Construction Bucket (21.0 cu. ft.) AT319181 $1,286.00

84 in. HD Construction Bucket (21.0 cu. ft.) with Edge AT322311 $1,422.00

84 in. HD Tooth Bucket (21.0 cu. ft.) AT321181 $1,447.00

84 in. HD Utility Bucket (27.0 cu. ft.) KV21470 $1,205.00

84 in. HD Utility Bucket (27.0 cu. ft.) with Edge KV24758 $1,500.00

Buckets:

78 in. HD Construction Bucket (19.4 cu. ft.) AT319180 $1,149.00

78 in. HD Foundry Bucket (17.8 cu. ft.) KV22758 $1,040.00

Construction Buckets with Edge, 66-78" Bundle

Includes 66", 72", 76", and 78" sizes.Different bucket sizes fit different machine sizes.Price includes a 5% discount from individual buckets' prices.

AT340103 $4,801.00

Page 9 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 71: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Construction Buckets with Edge, 72-84" Bundle

Includes 72", 76", 78", and 84" sizes.Different bucket sizes fit different machine sizes.Price includes a 5% discount from individual buckets' prices.

AT340104 $5,071.00

Cutting Edges:

76 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

T223081 View Price

78 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

KV12758 View Price

84 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

KV12471 View Price

Kits and Accessories:

12 Volt Demonstration Kit

3-pin connector

KV21995 $305.00

Attachment Control

For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.

AT427986 $406.00

Backup Alarm

For use with EH Controls (0950) or (0975)

AT348451 $204.00

Beacon Warning Light AT431920 $320.00

Block Heater Kit AT427686 $110.00

Bobcat Attachment Harness Adapter Kit

Must have the 14 pin attachment connector already installed

AT417736 $344.00

Cold Start Package AT430894 $355.00

Counterweight, Stackable (Single Set)

Includes 2 - 86 lb weights (39 Kg)

AT348835 $352.00

EH Joystick Performance Package

Factory Code 8395 or kit AT427990 Keyless Start (Sealed Switch Module) isrequired prior to installing EH performance package

AT427988 $593.00

Engine Air Pre-Cleaner Kit AT425357 $457.00

Field Kit, Reversing Fan

For S/N 269401 and below.

AT410782 $964.00

Foot Throttle Removal Kit AT410246 $51.00

HD Rear Grille AT398389 $593.00

Page 10 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 72: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Provides protection to cooling package

Hazard Warning Lights AT431921 $127.00

High Spring Effort Joysticks AT433683 $766.00

Horn

For use with EH Controls (0950) or (0975)

AT339797 $115.00

Hydraulic Quick Coupler Adapter Kit

Adapts Highflow Machine Aux Couplers to Operate Low Flow Attachment.

AT428072 $325.00

Joystick Pod Mounted Throttle AT419446 $152.00

Keyless Start (Sealed Switch Module) AT427990 $401.00

Radio, AM/FM/WB with Aux Input AT427984 $510.00

Reversing Fan Kit

For S/N 269402 and above.

AT448244 $834.00

SMV Sign AT427982 $77.00

Severe Duty Door

Includes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.

AT417602 $3,076.00

Severe Duty Door

Includes windshield wiper.For ROPS Canopy units also order AT440395.Required to meet ISO 8084 Forestry Applications.S/N 269402 and above.

AT446334 $3,076.00

Severe Duty Door Hardware and Washer Bottle Kit AT440395 $170.00

Single Point Lift System AT417891 $1,523.00

Standard Door, Field Kit

S/N 269401 and below.

AT425132 $1,030.00

Standard Door, Field Kit

S/N 269402 and above.

AT446335 $1,030.00

Operator Environment:

Trim Elbow Pad Field Kit AT417600 $28.00

Tooth Bars:

72 in. Tooth Bar - 7 Teeth KV11598 $510.00

72 in. Tooth Bar for BOCE - 8 Teeth AT347128 $733.00

76 in. Tooth Bar - 8 Teeth AT331906 $525.00

Page 11 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 73: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

76 in. Tooth Bar for BOCE - 8 Teeth AT347130 $772.00

78 in. Tooth Bar - 8 Teeth KV12296 $559.00

78 in. Tooth Bar for BOCE - 7 Teeth AT347132 $803.00

84 in. Tooth Bar - 8 Teeth KV12298 $680.00

84 in. Tooth Bar for BOCE - 9 Teeth AT347135 $827.00

Wheels and Tires, Four:

12x16.5 10 PR SKS Extra-Wall KV21876 $1,577.00

12x16.5 10 PR Titan HD2000-III KV14674 $1,817.00

14x17.5 12 PR SKS Extra-Wall KV21887 $2,418.00

14x17.5 14 PR Titan HD2000-III KV21892 $2,959.00

Wheels and Tires, Single (Left Hand Only):

14x17.5 14PR Galaxy Hulk, Left AT446729 $923.00

Wheels and Tires, Single (Right Hand Only):

12x16.5 10 PR SKS Extra-Wall KV23687 $396.00

12x16.5 10 PR Titan HD2000-III KV23689 $468.00

14x17.5 12 PR SKS Extra-Wall KV23690 $615.00

14x17.5 14 PR Titan HD2000-III KV23691 $753.00

14x17.5 14PR Galaxy Hulk, Right AT446730 $923.00

REFERRAL ATTACHMENTS

Description Code PriceG.R. Mfg.:G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales supportand assistance will be the responsibility of G.R. Manufacturing, Inc., and will behandled directly between the Dealer and G.R. Manufacturing, Inc.

G.R. Manufacturing, Inc.4800 Commerce DriveTrussville, Alabama 35173Phone: (800)841-8001Fax: (205)655-8005

Auxillary Hydraulic Line Quick Coupler Guard AT432855 $220.00

Bottom Opening Cover Plates AT432853 $350.00

Page 12 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 74: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Exhaust Hood Opening Seal AT432861 $120.00

Front Work Lights and Rear Light Guards AT432854 $218.00

Guard, Bucket Cylinder Rod AT406618 $320.00

Level II FOPS Plate

Required to meet ISO 8083 Level 2 Forestry ApplicationsFor use on D and E Series

AT445276 $602.00

Lift Cylinder Hose Guards AT372956 $420.00

Operator Rear Window / Side Window Guards

Required to meet ISO 8084 Forestry ApplicationsNot recommended for use with Hazard Warning Lights

AT372949 $640.00

Rear Deflector and Bumper AT432858 $1,962.00

Rear Grille Guard w/o Side Bumpers AT432857 $1,220.00

Rear Hydraulic Circuit

Standard Flow Only - 25 gpm maximum.Will not work on Hand Control Units.

AT432860 $3,200.00

Rubber Boom Pocket Debris Guards AT388938 $340.00

Severe Duty Package

Package Includes: Rear Deflector/Bumper, Exh Hood Opening Gd., FOPS, LiftCyl Hose Gds., Aux.Hyd Line Quick Gd., Oper Rear & Side Screens, Toe Gd.,Bottom Gds., Front & Rear Wrk Light Gds., Rubber Boom Pocket Gd.

AT433164 $5,052.00

Toe Guard and Door Upgrade Kit

Required to meet ISO 8084 Forestry Applications

AT372950 $492.00

Winch, Rear Mounted

Requires Rear Deflector/Bumper Kit.Will not work on Hand Control Units.Not for use with Ride Control or Hydraulic Self-Level.Includes Rear Hydraulic Circuit Kit.

AT432859 $9,120.00

Copyright © 1996-2014 Deere & Company. All Rights Reserved. About Our Site | Privacy and Data | Legal | |

Page 13 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 75: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Current Date 13Apr2015

332E SKID STEER

Equipment for Base MachineEngine: Yanmar 4TNV94CHT 3.1Lmeets Interim Tier 4emissions 4 Cylinder Turbo-Charged 100 Gross H.P. 97 Net H.P. Electronic Injection System Auto Idle Glow Plugs Hydraulic Cool-on-DemandVariable Speed Fan V-Plenum Cooling Dual Element Air Cleaner Automatic Fan BeltTensioner John Deere "Cool Gard II"Extended Life Anti-Freeze John Deere Plus 50 10w30Engine Oil 5 Micron Primary Fuel Filter 26 Gallon (98.4 L) FuelTankFinal Drive System andBrake: Servo Hydrostatic Pumps Four Wheel Drive Two 100 HD Endless Chain Integral Automatic Wet-Disk

Brake Spring AppliedHydraulic ReleaseGauges and Instruments: Fuel Gauge Engine Coolant TemperatureGauge Operator Selectable LCD Digital Readout: Hourmeter Engine RPM Battery Voltage Engine Coolant Temp. Hydraulic Oil Temp. Job Clock Service Codes

Configuration Codes Indicator Warning Lights: Battery Not Charging Hydraulics Locked Out Park Brake Illumination Hydraulic Oil Over Temp. 2-Speed Engaged Air Filter Restriction Hydraulic Oil FilterRestriction Lap Bar Switch Seat Switch Door Open Switch Engine Preheat Low Engine Oil Pressure Automatic Engine Preheat Automatic Engine Shutdownwith Alarm

Electrical: 12-Volt Electrical Battery925 cca Alternator 70 Amp Halogen Work Lights, Frontand Rear Time delayed courtesylighting shutoff systemHydraulics: 3-Spool Open Center Valve 25 gpm (95 L/m) Pump 3 Micron Hydraulic Filter 10w30 Engine Oil John Deere Boom andBucket Cylinders withCushioned Boom Cylinders Auxiliary Hydraulics withFlat Faced Connect-under-pressure Couplers Loader Arm, Bucket, &Auxiliary Hydraulic LockoutSystem Auxiliary Hydraulics Lock-out Override Boom Float

Performance Characteristics: Rated Operating Capacity3,200 lb. (1,453 kg) Tipping Load 6,400 lb.(2,906 kg) Bucket Breakout Force13,875 lb. (6,299 kg) Boom Breakout Force 6,600lbs. (2,270 kg) Axle Torque 6,830 lbs-ft(9,289 Nm)OperatorProtection/Comfort: FOPS / ROPS Roll-Guardwith Side Screens In-Cab Boom LockoutSystem Interlocking Lap Bar andRetractable Seat Belt system Adjustable Lap Bar Operator Presence SystemSeat Switch & Lap BarInterlocks for Loader Arm,Bucket, & AuxiliaryCircuits Deluxe Headliner 12V power port Cell Phone cargo netstorage Interior Dome Lighting Cup Holder Grab Handles for EasyEntry / Exit Top and Rear Windows Water Shedding DeluxeVinyl Seat Convenient Tie Downs

Attachment Coupler: John Deere patented Quik-Tatch system (no greaserequired)Warranty (US and Canada): John Deere StandardWarranty 1 Year Unlimited

Page 1 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 76: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Diagnostic Codes Hours

Required - You must select one from each categoryBASE MACHINE

F.O.B. Dubuque, Iowa

Description Code Price332E SKID STEER 8411T $52,417.00

SKID STEER VALUE PACKAGES

PRICE LISTED IS A 10% DISCOUNT FOR OPTIONAL EQUIPMENT-EXCLUDING ENGINES. (Each option's price will be listedon the same line as that option.)

Description Code Price332E Standard Skid Steer

Note: Includes standard equipment

0800 In Base Price

Utility Package With ISO Pattern Joystick Controls

Package includes:* EH (ISO Pattern) Joystick Controls (0950)* Single-Speed (1025)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* Standard Base Hydraulics (3000)* Ride Control (3100)* 3 in. Seat Belt (4002)* Power Quik-Tatch (5001)* Canopy - ROPS / FOPS (5200)* Mechanical Suspension Seat (Vinyl) (6001)* Standard Fan Drive (6500)* Horn (6800)* Less EH Joystick Performance Package (7101)* Backup Alarm (8040)* Rear View Mirror (interior cab mount) (8350)* Keyless Start (8395)

0815 ($609.00)

Deluxe Cab Package With ISO Pattern Joystick Controls

Package includes:* EH (ISO Pattern) Joystick Controls (0950)* Two Speed (1050)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* Standard Base Hydraulics (3000)* Ride Control (3100)* 3 in. Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5001)* Cab Enclosure with Heat, Defrost, & Air Conditioning (5204)* Air Suspension Seat (Cloth) (6002)* Standard Fan Drive (6500)* Horn (6800)* EH Joystick Performance Package (7100)* Backup Alarm (8040)* Chrome Exhaust (8225)* Radio AM/FM/WB W/ Aux Input (8340)* Rear View Mirror (interior cab mount) (8350)* Foot Rest with Floormat (8380)* Keyless Start (8395)

0820 ($1,568.00)

Deluxe Cab Package With ISO Pattern Joystick Controls & 0825 ($1,928.00)

Page 2 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 77: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Hi-Flow

Package includes:* EH (ISO Pattern) Joystick Controls (0950)* Two Speed (1050)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* High Flow Hydraulics (3002)* Ride Control (3100)* 3 in. Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5001)* Cab Enclosure with Heat, Defrost, & Air Conditioning (5204)* Air Suspension Seat (Vinyl) (6003)* Reversing Fan Drive (6501)* Horn (6800)* EH Joystick Performance Package (7100)* Backup Alarm (8040)* Engine Air Precleaner (8060)* Chrome Exhaust (8225)* Radio AM/FM/WB W/ Aux Input (8340)* Rear View Mirror (interior cab mount) (8350)* HD Rear Grille (8370)* Foot Rest with Floormat (8380)* Keyless Start (8395)

Utility Package With Switchable Joystick Controls

Package includes:* Switchable EH Foot-H-ISO Pattern Joystick Controls (0990)* Single-Speed (1025)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* Standard Hydraulics (3000)* Ride Control (3100)* 3 in. Seat Belt (4002)* Power Quik-Tatch (5001)* Canopy - ROPS/FOPS (5200)* Mechanical Suspention Seat (Vinyl) (6001)* Standard Fan Drive (6500)* Horn (6800)* Less EH Joystick Performance Package (7101)* Backup Alarm (8040)* Rear View Mirror (interior cab mount) (8350)* Keyless Start (8395)

0830 ($911.00)

Deluxe Cab Package With Switchable Joystick Controls

Package includes:* Switchable EH Foot-H-ISO Pattern Joystick Controls (0990)* Two Speed (1050)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* Standard Base Hydraulics (3000)* Ride Control (3100)* 3 in. Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5001)* Cab Enclosure with Heat, Defrost, & Air Conditioning (5204)* Air Suspension Seat (Cloth) (6002)* Standard Fan Drive (6500)* Horn (6800)* EH Joystick Performance Package (7100)* Backup Alarm (8040)* Chrome Exhaust (8225)* Radio AM/FM/WB W/ Aux Input (8340)* Rear View Mirror (interior cab mount) (8350)* Keyless Start (8395)

0835 ($1,856.00)

Deluxe Cab Package With Switchable Joystick Controls & Hi-Flow

Package includes:

0840 ($2,216.00)

Page 3 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 78: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

* Switchable EH Foot-H-ISO Pattern Joystick Controls (0990)* Two Speed (1050)* English Operator's Manual & Decals (1501)* 14x17.5 14 PR Titan HD2000-II (2320)* High Flow Hydraulics (3002)* Ride Control (3100)* 3 in. Seat Belt with Shoulder Harness (4003)* Power Quik-Tatch (5001)* Cab Enclosure with Heat, Defrost, & Air Conditioning (5204)* Air Suspension Seat (Vinyl) (6003)* Reversing Fan Drive (6501)* Horn (6800)* EH Joystick Performance Package (7100)* Backup Alarm (8040)* Engine Air Precleaner (8060)* Chrome Exhaust (8225)* Radio AM/FM/WB W/ Aux Input (8340)* Rear View Mirror (interior cab mount) (8350)* HD Rear Grille (8370)* Keyless Start (8395)

ENGINE

Description Code PriceEngine - Turbocharged 1301 $2,339.00

OPERATOR STATION

Description Code PriceCanopy - ROPS / FOPS 5200 In Base Price

Canopy - ROPS / FOPS with Severe Duty Door

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003).

5201 $2,768.00

Cab Enclosure with Air-Conditioning, Heat and Defrost

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003)

5204 $4,608.00

Cab Enclosure with Air-Conditioning, Heat, Defrost, andSevere Duty Door

Requires 2-inch Seat Belt with Shoulder Harness (4001) or 3-inch Seat Belt withShoulder Harness (4003)

5205 $6,672.00

SEAT

Description Code PriceSeat (Vinyl) 6000 ($417.00)

Mechanical Suspension Seat (Vinyl) 6001 In Base Price

Air Suspension Seat (Cloth)

For use with Cab Enclosure/Severe Duty Door (5204 & 5205).

6002 $452.00

Vinyl, Air-Ride Seat 6003 $452.00

SEAT BELTS

Description Code Price

Page 4 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 79: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

2-Inch Seat Belt

For use with Canopy - ROPS / FOPS (5200)

4000 In Base Price

2-Inch Seat Belt with Shoulder Harness 4001 $212.00

3-Inch Seat Belt

Required in British Columbia and California; construction industry safety orders useof 3 inch wide webbing seat beltFor use with Canopy - ROPS / FOPS (5200)

4002 $164.00

3-Inch Seat Belt with Shoulder Harness 4003 $379.00

CONTROLS

Description Code PriceE-H (ISO Pattern) Joystick Controls 0950 In Base Price

EH (H Pattern) Joystick Controls

High Spring Efforts

0975 $212.00

EH Foot and Joystick Controls 0980 $1,328.00

Switchable EH Foot-H-ISO Pattern Joystick Controls

Code 8395 Keyless Start (Sealed Switch Module) is required.

Three way Switchable Controls between EH Foot Control, ISO Joystick Control, orH-Pattern Joystick Control modes.

Includes Switchable Accelerator/Decelerator with right side foot pedal whenoperating in ISO or H-Pattern Joystick Control mode.

0990 $3,020.00

JOYSTICK PERFORMANCE

Description Code PriceEH Joystick Performance Package

Code 8395 Keyless Start (Sealed Switch Module) is required.

Switchable control patterns between ISO and H (If ordered with code 0950 or0975)Selectable propel aggressivenessCreeper ModeBoom and Bucket speed settings12V 3 Pin and 14 Pin Attachment Control Harness

7100 $798.00

Less EH Joystick Performance Package 7101 In Base Price

TRANSMISSION

Description Code PriceSingle-Speed 1025 In Base Price

Two-Speed 1050 $2,508.00

HYDRAULIC OPTIONS

Description Code PriceStandard Hydraulics 3000 In Base Price

Page 5 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 80: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Pump Flow = 25 gpm

Standard Hydraulics and Hydraulic Self-Leveling Up

Pump Flow = 25 gpm

Note - Order Code 3101 (Less Ride Control) is required; Order Code 3100 (RideControl) is NOT available with this option.

3001 $575.00

High Flow Hydraulics

Pump Flow = 38 gpm

Includes 1/2 in Auxiliary coupler sizes.

3002 $1,830.00

High Flow Hydraulics and Hydraulic Self-Leveling Up

Pump Flow = 38 gpm

Note - Order Code 3101 (Less Ride Control) is required; Order Code 3100 (RideControl) is NOT available with this option.

Includes 1/2 in Auxiliary coupler sizes.

3003 $2,408.00

RIDE CONTROL

Description Code PriceRide Control

Code 8395 Keyless Start (Sealed Switch Module) is required.

3100 $995.00

Less Ride Control 3101 In Base Price

QUIK-TATCH

Description Code PriceManual Quik-Tatch 5000 In Base Price

Power Quik-Tatch 5001 $834.00

COOLING FAN

Description Code PriceStandard Fan Drive 6500 In Base Price

Reversing Fan Drive 6501 $830.00

HORN

Description Code PriceHorn 6800 $140.00

Less Horn 6801 In Base Price

WHEELS AND TIRES

Description Code Price14x17.5 14 PR Titan HD2000-II 2320 $3,362.00

Page 6 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 81: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Gives 78.5 in. Skid Steer width at wide setting

14x17.5 Treaded Brawler SolidFlex

Gives 73.5 in. Skid Steer width at wide settingNot Compatible with Tracks

2420 $5,700.00

14x17.5 12 PR SKS Extra-Wall

For use primarily in dirt applications.No narrow setting possible.

2330 $2,887.00

14x17.5 14 PR Galaxy Hulk 2450 $3,865.00

OPERATOR MANUAL & DECALS

Description Code PriceEnglish Operator's Manual & Decals

For use with FT4 Engine

1501 No Charge

French Operator's Manual & Decals

For use with FT4 Engine

1510 No Charge

Spanish Operator's Manual & Decals

For use with FT4 Engine

1515 No Charge

Optional - Select as desiredKITS AND ACCESSORIES - FACTORY INSTALLED

Description Code PriceBackup Alarm 8040 $105.00

Cold Start Package

Includes Heavy Duty 925cca Battery, Hydraulic Bypass, and Block Heater

8050 $303.00

Engine Air Precleaner 8060 $455.00

Hazard Warning Lights 8075 $159.00

Chrome Exhaust 8225 $328.00

Counterweight, Stackable (Second Set)

Includes 2 - 86 lb weights (39 Kg)

8305 $349.00

Counterweight, Stackable (Third Set)

Includes 2 - 86 lb weights (39 Kg)Requires Counterweight, Stackable (Second Set) (8305)

8310 $349.00

Radio, AM/FM/WB with Aux Input

For use with enclosed cab only: codes 5204 & 5205

8340 $540.00

Rear View Mirror (Interior cab mount) 8350 $90.00

HD Rear Grille 8370 $486.00

Page 7 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 82: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Provides protection to cooling package.

Foot Rest with Floormat

For use with E-H (ISO Pattern) Joystick Controls (0950), or E-H (H Pattern)Joystick Controls (0975).

8380 $144.00

Floormat

For use with E-H (ISO Pattern) Joystick Controls (0950), or E-H (H Pattern)Joystick Controls (0975).

8390 $122.00

Switchable Accelerator / Decelerator

Turns existing foot throttle in to a decelerating pedal.

Requires order code 8395 (Keyless Start) and 0950 (E-H (ISO Pattern) JoystickControls) or 0975 (EH (H-Pattern) Joystick Controls).

8392 $237.00

Keyless Start (Sealed Switch Module)

Includes: programmable machine security code system

8395 $399.00

BUCKETS: (REFER TO BUCKET COMPATABILITY CHART)

See Attachments for Multi-Purpose Buckets

Description Code Price78 in. HD Construction Bucket (19.4 cu. ft.) 9051 $1,149.00

78 in. HD Construction Bucket (19.4 cu. ft.) with Edge 9052 $1,339.00

78 in. HD Tooth Bucket (19.4 cu. ft.) 9221 $1,353.00

78 in. HD Utility Bucket (24.5 cu. ft.) 9330 $1,138.00

78 in. HD Utility Bucket (24.5 cu. ft.) with Edge 9331 $1,339.00

84 in. HD Construction Bucket (21.0 cu. ft.) 9061 $1,286.00

84 in. HD Construction Bucket (21.0 cu. ft.) with Edge 9062 $1,422.00

84 in. HD Tooth Bucket (21.0 cu. ft.) 9231 $1,447.00

84 in. HD Utility Bucket (27.0 cu. ft.) 9340 $1,205.00

84 in. HD Utility Bucket (27.0 cu. ft.) with Edge 9341 $1,500.00

EXPORT CODES

Description Code PriceAustralian Compliance Certificate and Hearing ProtectionCaution Label

9280 No Charge

SPECIAL EQUIPMENT - ORDER AS DESIRED

Description Code PriceRust Preventative 9909 $160.00

Page 8 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 83: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Coating protects exposed unpainted surfaces from road salt during shipment.Applied at PSL.Not for use with export shipments as export pricing includes rust prevention.

DEALER-INSTALLED KITS

Description Code PriceBUCKETS:See Attachments for Multi-Purpose Buckets

78 in. HD Construction Bucket (19.4 cu. ft.) with Edge AT322310 $1,339.00

78 in. HD Tooth Bucket (19.4 cu. ft.) AT321180 $1,353.00

78 in. HD Utility Bucket (24.5 cu. ft.) KV22802 $1,138.00

78 in. HD Utility Bucket (24.5 cu. ft.) with Edge KV24757 $1,339.00

84 in. HD Construction Bucket (21.0 cu. ft.) AT319181 $1,286.00

84 in. HD Construction Bucket (21.0 cu. ft.) with Edge AT322311 $1,422.00

84 in. HD Tooth Bucket (21.0 cu. ft.) AT321181 $1,447.00

84 in. HD Utility Bucket (27.0 cu. ft.) KV21470 $1,205.00

84 in. HD Utility Bucket (27.0 cu. ft.) with Edge KV24758 $1,500.00

Buckets:

78 in. HD Construction Bucket (19.4 cu. ft.) AT319180 $1,149.00

78 in. HD Foundry Bucket (17.8 cu. ft.) KV22758 $1,040.00

Construction Buckets with Edge, 66-78" Bundle

Includes 66", 72", 76", and 78" sizes.Different bucket sizes fit different machine sizes.Price includes a 5% discount from individual buckets' prices.

AT340103 $4,801.00

Construction Buckets with Edge, 72-84" Bundle

Includes 72", 76", 78", and 84" sizes.Different bucket sizes fit different machine sizes.Price includes a 5% discount from individual buckets' prices.

AT340104 $5,071.00

Cutting Edges:

76 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

T223081 View Price

78 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

KV12758 View Price

84 in. Bolt-On Cutting Edge

Requires additional hardware; see Parts.

KV12471 View Price

Kits and Accessories:

Page 9 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 84: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

12 Volt Demonstration Kit

3-pin connector

KV21995 $305.00

Attachment Control

For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.

AT427986 $406.00

Backup Alarm

For use with EH Controls (0950) or (0975)

AT348451 $204.00

Beacon Warning Light AT431920 $320.00

Block Heater Kit AT427686 $110.00

Bobcat Attachment Harness Adapter Kit

Must have the 14 pin attachment connector already installed

AT417736 $344.00

Cold Start Package AT430894 $355.00

Counterweight, Stackable (Single Set)

Includes 2 - 86 lb weights (39 Kg)

AT348835 $352.00

EH Joystick Performance Package

Factory Code 8395 or kit AT427990 Keyless Start (Sealed Switch Module) isrequired prior to installing EH performance package

AT427988 $593.00

Engine Air Pre-Cleaner Kit AT425357 $457.00

Field Kit, Reversing Fan

For S/N 269401 and below.

AT410782 $964.00

Foot Throttle Removal Kit AT410246 $51.00

HD Rear Grille

Provides protection to cooling package

AT398389 $593.00

Hazard Warning Lights AT431921 $127.00

High Spring Effort Joysticks AT433683 $766.00

Horn

For use with EH Controls (0950) or (0975)

AT339797 $115.00

Hydraulic Quick Coupler Adapter Kit

Adapts Highflow Machine Aux Couplers to Operate Low Flow Attachment.

AT428072 $325.00

Joystick Pod Mounted Throttle AT419446 $152.00

Keyless Start (Sealed Switch Module) AT427990 $401.00

Radio, AM/FM/WB with Aux Input AT427984 $510.00

Reversing Fan Kit AT448244 $834.00

Page 10 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 85: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

For S/N 269402 and above.

SMV Sign AT427982 $77.00

Severe Duty Door

Includes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.

AT417602 $3,076.00

Severe Duty Door

Includes windshield wiper.For ROPS Canopy units also order AT440395.Required to meet ISO 8084 Forestry Applications.S/N 269402 and above.

AT446334 $3,076.00

Severe Duty Door Hardware and Washer Bottle Kit AT440395 $170.00

Single Point Lift System AT417891 $1,523.00

Standard Door, Field Kit

S/N 269401 and below.

AT425132 $1,030.00

Standard Door, Field Kit

S/N 269402 and above.

AT446335 $1,030.00

Operator Environment:

Trim Elbow Pad Field Kit AT417600 $28.00

Tooth Bars:

78 in. Tooth Bar - 8 Teeth KV12296 $559.00

78 in. Tooth Bar for BOCE - 7 Teeth AT347132 $803.00

84 in. Tooth Bar - 8 Teeth KV12298 $680.00

84 in. Tooth Bar for BOCE - 9 Teeth AT347135 $827.00

Wheels and Tires, Four:

14x17.5 14 PR Titan HD2000-III KV21892 $2,959.00

Wheels and Tires, Single (Left Hand Only):

14x17.5 14PR Galaxy Hulk, Left AT446729 $923.00

Wheels and Tires, Single (Right Hand Only):

14x17.5 14 PR Titan HD2000-III KV23691 $753.00

14x17.5 14PR Galaxy Hulk, Right AT446730 $923.00

REFERRAL ATTACHMENTS

Page 11 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 86: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Description Code PriceG.R. Mfg.:G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales supportand assistance will be the responsibility of G.R. Manufacturing, Inc., and will behandled directly between the Dealer and G.R. Manufacturing, Inc.

G.R. Manufacturing, Inc.4800 Commerce DriveTrussville, Alabama 35173Phone: (800)841-8001Fax: (205)655-8005

Auxillary Hydraulic Line Quick Coupler Guard AT432855 $220.00

Bottom Opening Cover Plates AT432853 $350.00

Exhaust Hood Opening Seal AT432861 $120.00

Front Work Lights and Rear Light Guards AT432854 $218.00

Guard, Bucket Cylinder Rod AT397454 $320.00

Level II FOPS Plate

Required to meet ISO 8083 Level 2 Forestry ApplicationsFor use on D and E Series

AT445276 $602.00

Lift Cylinder Hose Guards AT372947 $420.00

Operator Rear Window / Side Window Guards

Required to meet ISO 8084 Forestry ApplicationsNot recommended for use with Hazard Warning Lights

AT372949 $640.00

Rear Deflector and Bumper AT432858 $1,962.00

Rear Grille Guard w/o Side Bumpers AT432857 $1,220.00

Rear Hydraulic Circuit

Standard Flow Only - 25 gpm maximum.Will not work on Hand Control Units.

AT432860 $3,200.00

Rubber Boom Pocket Debris Guards AT388938 $340.00

Severe Duty Package

Package Includes: Rear Deflector/Bumper, Exh Hood Opening Gd., FOPS, LiftCyl Hose Gds., Aux.Hyd Line Quick Gd., Oper Rear & Side Screens, Toe Gd.,Bottom Gds., Front & Rear Wrk Light Gds., Rubber Boom Pocket Gd.

AT432870 $5,052.00

Toe Guard and Door Upgrade Kit

Required to meet ISO 8084 Forestry Applications

AT372950 $492.00

Winch, Rear Mounted

Requires Rear Deflector/Bumper Kit.Will not work on Hand Control Units.Not for use with Ride Control or Hydraulic Self-Level.

AT432859 $9,120.00

Page 12 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...

Page 87: Current Date 21Nov2014 313 SKID STEER - DMS · Current Date 21Nov2014 313 SKID STEER Equipment for Base Machine Engine: John Deere PowerTech E 2.4L certified to IT4 / Stage IIIB emissions

Includes Rear Hydraulic Circuit Kit.

Copyright © 1996-2014 Deere & Company. All Rights Reserved. About Our Site | Privacy and Data | Legal | |

Page 13 of 13

4/13/2015https://configurator-stage.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Eq...