ctrl
TRANSCRIPT
-
CONTROL ACCESSORIES
Cable Ducts Page
Product Data - Type A, Type B 9/2,9/3
Ordering Information 9/4,9/5
Technical Data 9/6
Overall Dimensions 9/43
Limit Switches Page
Product Data and Ordering Information 9/7-9/12
Technical Data 9/13
Overall Dimensions 9/44-9/46
Foot Switches Page
Product Data and Ordering Information 9/14,9/15
Technical Data 9/16
Overall Dimensions 9/47
Electronic Timers Page
Product Data and Ordering Information 9/17,9/18
Accessories 9/19
Technical Data 9/23
Overall Dimensions 9/48
www.LNTEBG.com
9
-
CONTROL ACCESSORIES
Electro Mechanical Timing Devices Page
Product Data and Ordering Information 9/17,9/20
Accessories 9/21
Technical Data 9/24,9/25
Overall Dimensions 9/49,9/50
Modular Remote Control Units Page
Product Data and Ordering Information 9/27-9/29,9/31
9/32,9/34-9/36,9/38
Accessories 9/30,9/33,9/34,9/37,9/38
Spares 9/31,9/33
Technical Data 9/40-9/42
Overall Dimensions 9/51-9/53
Push Button Pendants Page
Product Data and Ordering Information 9/39
Overall Dimensions 9/54
Time Switches Page
Product Data and Ordering Information 9/17,9/22
Accessories 9/22
Technical Data 9/26
Overall Dimensions 9/50
www.LNTEBG.com
9
-
9/1 www.LNTEBG.com
9
Manufactured from specially compounded high impact rigid polyvinyl chloride.
Will not peel, chip or crack.
Resists oils, salt solutions, fungus.
Nonflammable, warp-proof, non-brittle.
High dielectric strength and withstands temperature upto 70
Tested as per European and North American Standards, Carries CSA_NRTL/C, UL and CE Mark.
Unique Cover locking design.
Prevents popping up of wires, while removing cover.
Elongated slots at the bottom allows flexible mounting.
Heavy, robust sections.
Applications :
Facilities systematic wiring.
Enhances aesthetics and clarity.
Permits faster connections, addition and fault tracing of wires.
(Manufactured by Salzer Controls Limited)
SALIENT FEATURES OF CABLE DUCTS
-
9/2www.LNTEBG.com
9
1 A15 x 15 11 9 7 200
2 A25 x 15 19 15 12 128
3 A25 x 25 31 25 20 96
4 A25 x 30 37 30 23 96
5 A30 x 40 59 48 37 96
6 A25 x 45 56 45 35 96
7 A30 x 45 67 54 42 64
8 A45 x 45 100 81 63 36
9 A60 x 45 134 108 84 48
10 A25 x 60 74 60 47 72
11 A45 x 60 134 108 84 36
12 A60 x 60 178 145 112 36
13 A75 x 75 278 226 175 16
14 A80 x 80 316 257 199 16
15 A100 x 100 495 401 311 8
16 A120 x 60 356 289 224 8
S.No. Channel with Cover
Width x Height
mm
Cable Housing Capacity (Nos)
1.5 mm2
OD 3.18 mm
16 AWG
2.5mm2
OD 3.53 mm
14 AWG
Standard Pack,
*Total Length in Metres4 mm2
OD 4.01mm
12 AWG
PRODUCT INFORMATION - TYPE A
Note: * Each Length of 1 Metre
-
9/3 www.LNTEBG.com
9
1 B25 x 30 36 29 23 72
2 B25 x 40 48 39 31 72
3 B25 x 60 72 57 45 36
4 B25 x 80 92 75 59 36
5 B40 x 40 81 65 51 36
6 B40 x 60 121 98 77 36
7 B40 x 80 160 130 102 36
8 B60 x 40 123 99 78 24
9 B60 x 60 180 146 114 24
10 B60 x 80 246 199 156 24
11 B60 x 100 308 247 194 16
12 B80 x 40 165 134 105 24
13 B80 x 60 251 203 159 24
14 B80 x 80 337 272 214 24
15 B100 x 60 315 256 201 16
16 B100 x 80 425 344 270 16
17 B100 x 100 531 429 336 16
18 B150 x 100 807 653 512 8
S.No. Channel with Cover
Width x Height
mm
Cable Housing Capacity (Nos)
1.5 mm2
OD 3.18 mm
16 AWG
2.5mm2
OD 3.53 mm
14 AWG
Standard Pack,
*Total Length in Metres4 mm2
OD 4.01mm
12 AWG
PRODUCT INFORMATION - TYPE B
Note: * Each Length of 2 Metre
-
9/4www.LNTEBG.com
9
Description Catalogue No.
ORDERING INFORMATION - TYPE A
Note: Replace last two digits as SC for special color (Please Specify Color)
A 15x15 (HxW) 1M STD SLOT STD GREY CDA1515SG
A 15x25 (HxW) 1M STD SLOT STD GREY CDA1525SG
A 25x25 (HxW) 1M STD SLOT STD GREY CDA2525SG
A 30x25 (HxW) 1M STD SLOT STD GREY CDA3025SG
A 40x30 (HxW) 1M STD SLOT STD GREY CDA4030SG
A 45x25 (HxW) 1M STD SLOT STD GREY CDA4525SG
A 45x30 (HxW) 1M STD SLOT STD GREY CDA4530SG
A 45x45 (HxW) 1M STD SLOT STD GREY CDA4545SG
A 45x60 (HxW) 1M STD SLOT STD GREY CDA4560SG
A 60x25 (HxW) 1M STD SLOT STD GREY CDA6025SG
A 60x45 (HxW) 1M STD SLOT STD GREY CDA6045SG
A 60x60 (HxW) 1M STD SLOT STD GREY CDA6060SG
A 60x120 (HxW) 1M STD SLOT STD GREY CDA60120SG
A 75x45 (HxW) 1M STD SLOT STD GREY CDA7545SG
A 75x75 (HxW) 1M STD SLOT STD GREY CDA7575SG
A 80x80 (HxW) 1M STD SLOT STD GREY CDA8080SG
A 100x100 (HxW) 1M STD SLOT STD GREY CDA100100SG
A 15 COVER STD GREY CDA15SG
A 25 COVER STD GREY CDA25SG
A 30 COVER STD GREY CDA30SG
A 45 COVER STD GREY CDA45SG
A 60 COVER STD GREY CDA60SG
A 75 COVER STD GREY CDA75SG
A 80 COVER STD GREY CDA80SG
A 100 COVER STD GREY CDA100SG
-
9/5 www.LNTEBG.com
9
ORDERING INFORMATION - TYPE B
B 25x30 (WxH) 1M STD SLOT GREENISH GREY CDB2530GG
B 25x40 (WxH) 1M STD SLOT GREENISH GREY CDB2540GG
B 25x60 (WxH) 1M STD SLOT GREENISH GREY CDB2560GG
B 25x80 (WxH) 1M STD SLOT GREENISH GREY CDB2580GG
B 30x20 (WxH) 1M STD SLOT GREENISH GREY CDB3020GG
B 40x40 (WxH) 1M STD SLOT GREENISH GREY CDB4040GG
B 40x60 (WxH) 1M STD SLOT GREENISH GREY CDB4060GG
B 40x80 (WxH) 1M STD SLOT GREENISH GREY CDB4080GG
B 45x20 (WxH) 1M STD SLOT GREENISH GREY CDB4520GG
B 60x20 (WxH) 1M STD SLOT GREENISH GREY CDB6020GG
B 60x40 (WxH) 1M STD SLOT GREENISH GREY CDB6040GG
B 60x60 (WxH) 1M STD SLOT GREENISH GREY CDB6060GG
B 60x80 (WxH) 1M STD SLOT GREENISH GREY CDB6080GG
B 60x100 (WxH) 1M STD SLOT GREENISH GREY CDB60100GG
B 80x40 (WxH) 1M STD SLOT GREENISH GREY CDB8040GG
B 80x60 (WxH) 1M STD SLOT GREENISH GREY CDB8060GG
B 80x80 (WxH) 1M STD SLOT GREENISH GREY CDB8080GG
B 100x60 (WxH) 1M STD SLOT GREENISH GREY CDB10060GG
B 100x80 (WxH) 1M STD SLOT GREENISH GREY CDB10080GG
B 100x100 (WxH) 1M STD SLOT GREENISH GREY CDB100100GG
B 150x100 (WxH) 1M STD SLOT GREENISH GREY CDB150100GG
B 25 COVER GREENISH GREY CDB25GG
B 30 COVER GREENISH GREY CDB30GG
B 40 COVER GREENISH GREY CDB40GG
B 60 COVER GREENISH GREY CDB60GG
B 80 COVER GREENISH GREY CDB80GG
B 100 COVER GREENISH GREY CDB100GG
B 150 COVER GREENISH GREY CDB150GG
Description Cataloge No.
Note: Replace last two digits as SC for special color (Please Specify Color)
-
9/6www.LNTEBG.com
9
Type A Type B
Material High impact, self extinguishing High impact, self extinguishing
warp-proofing rigid PVC. warp-proofing rigid PVC.
Other material such as chlorine free Other material such as chlorine free
PPO is available. PPO is available.
Color
Standard Light Grey Dark Grey
Other Colors Black, Ivory, White, Blue, Green and Pink Black, Ivory, White, Blue, Green and Pink
Mechanical Properties
Tensile strength 390 kg/cm2 390 kg/cm2
IZOD impact strength 7 kgcm/cm 7 kg.cm/cm
Electrical Properties
Dielectric strength 36 kV/mm 36 kV/mm
Specific resistance 6.1 x 1014 ohm.cm 6.1 x 1014 ohm.cm
Thermal Properties
Flammability UL 94 VO UL 94 VO
TECHNICAL DATACABLE DUCTS
-
9/7 www.LNTEBG.com
9
SALIENT FEATURES OF LIMIT SWITCHES
Movable contact assembly with two coiled springs provides quick-make / quick-break action.
Absence of zero contact pressure ensures non-teasing action even with an extremely slow operation motion.
Light weight phosphor bronze contact carrier with silver contacts, assure long life on life load applications.
Silver contacts, definite wiping action and high contact pressure assure reliability on dry circuit applications.
Phenolic moulded case provides great physical strength, high arc resisting capacity and semi-dust proofness.
High degree of versatility as wide variety of operating heads available with individual mounting.
Applications :
Textile Machines
Injection Moulding Machines
Electrical hoist and cranes
Machine tools and wherever a mechanical to Electrical transution is required
(Manufactured by Pneumatic Controls)
-
9/8www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
PC 100 SERIES
SNAP - WITH HORIZONTAL ROLLER ACTUATOR SNAP ACTION 2NO+2NC 101H/2NO+2NC
SNAP - WITH VERTICAL ROLLER ACTUATOR SNAP ACTION 2NO+2NC 102V/2NO+2NC
SNAP - WITH STEM ACTUATOR ROLLER SNAP ACTION 2NO+2NC 103L/2NO+2NC
SNAP - WITH BELLOW ACTUATOR SNAP ACTION 2NO+2NC 104B/2NO+2NC
PC 200 SERIES
SNAP BALL ACTUATOR SNAP ACTION 1NO+1NC 201/1NO+1NC
NORM - WITH ROLLER ACTUATOR NORMAL ACTION 1NO+1NC 201/N/1NO+1NC
SNAP LEVER ACTUATOR SNAP ACTION 1NO+1NC 202/1NO+1NC
NORM - WITH ROLLER ACTUATOR NORMAL ACTION 1NO+1NC 202N/1NO+1NC
SNAP ROLLER LEVER ACTUATOR SNAP ACTION 1NO+1NC 203/1NO+1NC
NORM - WITH ROLLEVER LEVER ACTUATOR NORMAL ACTION 1NO+1NC 203N/1NO+1NC
SNAP SLIPPING ROLLER LEVER ACTUATOR SNAP ACTION 1NO+1NC 204/1NO+1NC
NORM - WITH SLIPPING ROLLER LEVER ACTUATOR NORMAL ACTION 1NO+1NC 204N/1NO+1NC
SNAP ROTATING ROLLER LEVER ACTUATOR SNAP ACTION 1NO+1NC 205/1NO+1NC
NORM - WITH ROTATING ROLLER LEVER ACTUATOR NORMAL ACTION 1NO+1NC 205N/1NO+1NC
SNAP SPRING NEEDLE ACTUATOR SNAP ACTION 1NO+1NC 206/1NO+1NC
NORM - WITH SPRING NEEDLE ACTUATOR NORMAL ACTION 1NO+1NC 206N/1NO+1NC
SNAP ANGULAR ROLLER LEVER (RH) ACTUATOR SNAP ACTION 1NO+1NC 207/1NO+1NC
NORM - ANGULAR ROLLER LEVER (RH) ACTUATOR SNAP ACTION 1NO+1NC 207/2/1NO+1NC
SNAP ANGULAR ROLLER LEVER (LH) ACTUATOR NORMAL ACTION 1NO+1NC 207/1N/1NO+1NC
NORM - ANGULAR ROLLER LEVER (LH) ACTUATOR NORMAL ACTION 1NO+1NC 207/2N/1NO+1NC
SNAP LONG ROLLER LEVER ACTUATOR SNAP ACTION 1NO+1NC 208/1NO+1NC
NORM - WITH LONG ROLLER LEVER ACTUATOR NORMAL ACTION 1NO+1NC 208N/1NO+1NC
PC 300 SERIES
SNAP - WITH HORIZONTAL ROLLER LEVER ACTUATOR SNAP ACTION 1NO+1NC 301H/1NO+1NC
SNAP - WITH VERTICAL ROLLER LEVER ACTUATOR SNAP ACTION 1NO+1NC 301V/1NO+1NC
SNAP - WITH PLUNGER ACTUATOR SNAP ACTION 1NO+1NC 302P/1NO+1NC
SNAP - WITH ANGULAR LEAF ROLLER LEVER ACTUATOR SNAP ACTION 1NO+1NC 303H/1NO+1NC
PC 400 SERIES
DOUBLE PLUNGER ACTUATOR DOUBLE ACTION 1NO+1NC 401/1NO+1NC
PC 500 SERIES
SNAP SPECIAL MICRO SWITCH SNAP ACTION 1NO+1NC 501/1NO+1NC
DescriptionContacts
Type ConfigurationCatalogue No.
-
9/9 www.LNTEBG.com
9
PC 600 SERIES
SNAP PUSH ROD OPERATOR SNAP ACTION 1NO+1NC 600/1NO+1NC
NORM WITH PUSH ROD OPERATOR NORMAL ACTION 1NO+1NC 600N/1NO+1NC
EXTE STROKE WITH PUSH ROD OPERATOR EXTENDED STROKE 1NO+1NC 600NE/1NO+1NC
OVERLAP WITH PUSH ROD OPERATOR OVER-LAPPING 1NO+1NC 600NOL/1NO+1NC
SNAP WITH PUSH ROD AND PROTECTIVE COVER SNAP ACTION 1NO+1NC 600P/1NO+1NC
NORM WITH PUSH ROD AND PROTECTIVE COVER NORMAL ACTION 1NO+1NC 600NP/1NO+1NC
EXTE WITH PUSH ROD AND PROTECTIVE COVER EXTENDED STROKE 1NO+1NC 600NEP/1NO+1NC
OVERLAP WITH PUSH ROD AND PROTECTIVE COVER OVER-LAPPING 1NO+1NC 600NOLP/1NO+1NC
SNAP WITH PUSH ROD ALUMINIUM HOUSING SNAP ACTION 1NO+1NC 601/1NO+1NC
NORM WITH PUSH ROD ALUMINIUM HOUSING NORMAL ACTION 1NO+1NC 601N/1NO+1NC
EXTE WITH PUSH ROD ALUMINIUM HOUSING EXTENDED STROKE 1NO+1NC 601NE/1NO+1NC
OVERLAP WITH PUSH ROD ALUMINIUM HOUSING OVERLAPPING 1NO+1NC 601NOL/1NO+1NC
SNAP WITH ROLLER - ALUMINIUM HOUSING SNAP ACTION 1NO+1NC 602/1NO+1NC
NORM WITH ROLLER - ALUMINIUM HOUSING NORMAL ACTION 1NO+1NC 602N/1NO+1NC
EXTE WITH ROLLER - ALUMINIUM HOUSING EXTENDED STROKE 1NO+1NC 602NE/1NO+1NC
OVERLAP WITH ROLLER - ALUMINIUM HOUSING OVER-LAPPING 1NO+1NC 602NOL/1NO+1NC
SNAP WITH NORMAL ROLLER LEVER AL. HOUSING SNAP ACTION 1NO+1NC 603/1NO+1NC
NORM WITH NORMAL ROLLER LEVER AL. HOUSING NORMAL ACTION 1NO+1NC 603N/1NO+1NC
EXTE WITH NORMAL ROLLER LEVER AL. HOUSING EXTENDED STROKE 1NO+1NC 603NE/1NO+1NC
OVERLAP WITH NORMAL ROLLER LEVER AL. HOUSING OVER-LAPPING 1NO+1NC 603NOL/1NO+1NC
SNAP WITH NORMAL ROLLER LEVER AL. HOUSING SNAP ACTION 1NO+1NC 604/1NO+1NC
NORM WITH NORMAL ROLLER LEVER AL. HOUSING NORMAL ACTION 1NO+1NC 604N/1NO+1NC
EXTE WITH NORMAL ROLLER LEVER AL. HOUSING EXTENDED STROKE 1NO+1NC 604NE/1NO+1NC
OVERLAP WITH NORMAL ROLLER LEVER AL. HOUSING OVER-LAPPING 1NO+1NC 604NOL/1NO+1NC
SNAP WITH ROTATING ROLLER LEVER AL. HOUSING SNAP ACTION 1NO+1NC 605/1NO+1NC
NORM WITH ROTATING ROLLER LEVER AL. HOUSING NORMAL ACTION 1NO+1NC 605N/1NO+1NC
OVERLAP WITH ROTATING ROLLER LEVER AL. HOUSING OVER-LAPPING 1NO+1NC 605NOL/1NO+1NC
SNAP WITH SPRING NEEDLE ACTUATOR - AL. HOUSING SNAP ACTION 1NO+1NC 606/1NO+1NC
NORM WITH SPRING NEEDLE ACTUATOR - AL. HOUSING NORMAL ACTION 1NO+1NC 606N/1NO+1NC
SNAP WITH ANGULAR ROLLER LEVER - AL. HOUSING SNAP ACTION 1NO+1NC 607/1NO+1NC
NORM WITH ANGULAR ROLLER LEVER - AL. HOUSING NORMAL ACTION 1NO+1NC 607N/1NO+1NC
EXTE WITH ANGULAR ROLLER LEVER - AL. HOUSING EXTENDED STROKE 1NO+1NC 607NE/1NO+1NC
OVERLAP WITH ANGULAR ROLLER LEVER - AL. HOUSING OVER-LAPPING 1NO+1NC 607NOL/1NO+1NC
SNAP WITH LONG ROLLER LEVER - AL. HOUSING SNAP ACTION 1NO+1NC 608/1NO+1NC
NORM WITH LONG ROLLER LEVER - AL. HOUSING NORMAL ACTION 1NO+1NC 608N/1NO+1NC
OVERLAP WITH LONG ROLLER LEVER - AL. HOUSING OVER-LAPPING 1NO+1NC 608NOL/1NO+1NC
SNAP WITH NORMAL ROL. LEVER - AL. HOUSING SNAP ACTION 1NO+1NC 609/1NO+1NC
NORM WITH NORMAL ROL. LEVER - AL. HOUSING NORMAL ACTION 1NO+1NC 609N/1NO+1NC
EXTE WITH NORMAL ROL. LEVER - AL. HOUSING EXTENDED STROKE 1NO+1NC 609NE/1NO+1NC
OVERLAP WITH NORMAL ROL. LEVER - AL. HOUSING OVER-LAPPING 1NO+1NC 609NOL/1NO+1NC
DescriptionContacts
Type ConfigurationCatalogue No.
RANGE AND ORDERING INFORMATION
-
9/10www.LNTEBG.com
9
PC 700 SERIES
TOP PLUNGER 1NO+1NC 701/1NO+1NC
TOP PLUNGER WITH ROLLER 1NO+1NC 702/1NO+1NC
SIDE PLUNGER 1NO+1NC 703/1NO+1NC
SIDE PLUNGER WITH ROLLER 1NO+1NC 704/1NO+1NC
ROTARY SHAFT WITH ROLLER LEVER 38mm 1NO+1NC 705/1NO+1NC
MULTI-DIRECTION WITH NYLON ROD 1NO+1NC 706/1NO+1NC
ROTARY SHAFT WITH STEEL ROD 1NO+1NC 706/2/1NO+1NC
ROTARY SHAFT + FORK LEVER (ROLLER INLINE) 1NO+1NC 707/1/1NO+1NC
ROTARY SHAFT + STEEL ROD (ROLLER OFFSET) 1NO+1NC 708/1NO+1NC
ROTARY SHAFT + LONG ROLLER LEVER (76mm) 1NO+1NC 709/1NO+1NC
MAINTAINED ROTARY SHAFT + ROL LVR 38mm 1NO+1NC 705M/1NO+1NC
MAINTAINED ROTARY SHAFT + STEEL ROD 1NO+1NC 706/2M/1NO+1NC
MAINTAINED ROTARY SHAFT + FORK LEVER (INLINE) 1NO+1NC 707/1M/1NO+1NC
MAINTAINED ROTARY SHAFT + FORK LEVER (OFFSET) 1NO+1NC 707/2M/1NO+1NC
MAINTAINED ROTARY + LONG ROL LVR (76mm) 1NO+1NC 708M/1NO+1NC
MAINTAINED ROTARY SHAFT + ADJ. ROL. LVR 1NO+1NC 709M/1NO+1NC
PC 900 SERIES
NORM + PUSH ROD OPERATOR NORMAL ACTION 1NO+2NC 901N/1NO+2NC
NORM + PUSH ROD OPERATOR NORMAL ACTION 2NO+1NC 902N/2NO+1NC
OVERLAP + PUSH ROD OPERATOR OVER-LAPPING 1NO+2NC 901NOL/1NO+2NC
OVERLAP + PUSH ROD OPERATOR OVER-LAPPING 2NO+1NC 902NOL/2NO+1NC
NORM + PUSH ROD AND PROTECTIVE COVER NORMAL ACTION 1NO+2NC 901NP/1NO+2NC
NORM + PUSH ROD AND PROTECTIVE COVER NORMAL ACTION 2NO+1NC 902NP/2NO+1NC
OVERLAP + PUSH ROD AND PROTECTIVE COVER OVER-LAPPING 1NO+2NC 901NOLP/1NO+2NC
OVERLAP + PUSH ROD AND PROTECTIVE COVER OVER-LAPPING 2NO+1NC 902NOLP/2NO+1NC
NORM + PUSH ROD AND STD. AL. HOUSING NORMAL ACTION 1NO+2NC 901N-1A/1NO+2NC
NORM + PUSH ROD AND STD. AL. HOUSING NORMAL ACTION 2NO+1NC 902N-1A/2NO+1NC
OVERLAP + PUSH ROD AND STD. AL. HOUSING OVER-LAPPING 1NO+2NC 901N-1AOL/1NO+2NC
OVERLAP + PUSH ROD AND STD. AL. HOUSING OVER-LAPPING 2NO+1NC 902N-1AOL/2NO+1NC
NORM + NOR. ROL LEVER STD. AL. HOUSING NORMAL ACTION 1NO+2NC 901N-3A/1NO+2NC
NORM + NOR. ROL LEVER STD. AL. HOUSING NORMAL ACTION 2NO+1NC 902N-3A/2NO+1NC
OVERLAP + NOR. ROL LEVER STD. AL. HOUSING OVER-LAPPING 1NO+2NC 901N-3AOL/1NO+2NC
OVERLAP + NOR. ROL LEVER STD. AL. HOUSING OVER-LAPPING 2NO+1NC 902N-3AOL/2NO+1NC
NORM + ANG. ROLLER LEVER STD. AL. HOUSING NORMAL ACTION 1NO+2NC 901N-7A/1NO+2NC
NORM + ANG. ROLLER LEVER STD. AL. HOUSING NORMAL ACTION 2NO+1NC 902N-7A/2NO+1NC
OVERLAP + ANG. ROLLER LEVER STD. AL. HOUSING OVER-LAPPING 1NO+2NC 901N-7AOL/1NO+2NC
OVERLAP + ANG. ROLLER LEVER STD. AL. HOUSING OVER-LAPPING 2NO+1NC 902N-7AOL/2NO+1NC
NORM + ROLLER STD. AL. HOUSING NORMAL ACTION 1NO+2NC 901N-10A/1NO+2NC
NORM + ROLLER STD. AL. HOUSING NORMAL ACTION 2NO+1NC 902N-10A/2NO+1NC
OVERLAP + ROLLER STD. AL. HOUSING OVER-LAPPING 1NO+2NC 901N-10AOL/1NO+2NC
OVERLAP + ROLLER STD. AL. HOUSING OVER-LAPPING 2NO+1NC 902N-10AOL/2NO+1NC
DescriptionContacts
Type ConfigurationCatalogue No.
RANGE AND ORDERING INFORMATION
-
9/11 www.LNTEBG.com
9
PC 1000 SERIES
SNAP WITH 1.2 KG PRESSURE SWITCH SNAP ACTION 1NO+1NC 1000/12/1NO+1NC
SNAP WITH 1.5 KG PRESSURE SWITCH SNAP ACTION 1NO+1NC 1001/15/1NO+1NC
SNAP WITH 2.5 KG PRESSURE SWITCH SNAP ACTION 1NO+1NC 1001/25/1NO+1NC
SNAP WITH 6.0 KG PRESSURE SWITCH SNAP ACTION 1NO+1NC 1001/6/1NO+1NC
PC 1500 SERIES
PRECISION SWITCH WITHOUT OPERATOR 1NO+1NC 1500-1A/1NO+1NC
PRECISION SWITCH WITHOUT OPERATOR 2NO+2NC 1500-2A/2NO+2NC
TOP PUSH BUTTON OPERATOR 1NO+1NC 1501-1A/1NO+1NC
TOP PUSH BUTTON OPERATOR 2NO+2NC 1501-2A/2NO+2NC
SNAP - TOP PUSH ROLLER OPERATOR (HORIZONTAL) 1NO+1NC 1502-1AH/1NO+1NC
SNAP - TOP PUSH ROLLER OPERATOR (HORIZONTAL) 2NO+2NC 1502-2AH/2NO+2NC
SNAP - TOP PUSH ROLLER OPERATOR (VERTICAL) 1NO+1NC 1502-1AH/1NO+1NC
SNAP - TOP PUSH ROLLER OPERATOR (VERTICAL) 2NO+2NC 1502-2AH/2NO+2NC
SNAP - ROLLER LEVER OPERATOR (RH MOUNTING) 1NO+1NC 1503-1AR/1NO+1NC
SNAP - ROLLER LEVER OPERATOR (RH MOUNTING) 2NO+2NC 1503-2AR/2NO+2NC
SNAP - ROLLER LEVER OPERATOR (LH MOUNTING) 1NO+1NC 1503-1AL/1NO+1NC
SNAP - ROLLER LEVER OPERATOR (LH MOUNTING) 2NO+2NC 1503-2AL/2NO+2NC
SNAP - 6 INCH LEVER OPERATOR (RH MOUNTING) 1NO+1NC 1504-1AR/1NO+1NC
SNAP - 6 INCH LEVER OPERATOR (RH MOUNTING) 2NO+2NC 1504-2AR/2NO+2NC
SNAP - 6 INCH LEVER OPERATOR (LH MOUNTING) 1NO+1NC 1504-1AL/1NO+1NC
SNAP - 6 INCH LEVER OPERATOR (LH MOUNTING) 2NO+2NC 1504-2AL/2NO+2NC
DescriptionContacts
Type ConfigurationCatalogue No.
RANGE AND ORDERING INFORMATION
-
9/12www.LNTEBG.com
9
PC 200 SERIES
LIMIT SWIT ASSLY (SNAP FOR 200 SERIES) ALL TYPE OF 200 SERIES - SNAP ACTION 200S1
LIMIT SWIT ASSLY (NORMAL FOR 200 SERIES) ALL TYPE FO 200 SERIES - NORMAL ACTION 200NS1
ACTUATOR WITH ROLLER 202/202N 200AR
NORMAL ROLLER LEVER 203/203N 200NLR
SLIPPING ROLLER LEVER 204/204N 200SLR
38MM LEVER WITH ROLLER 205/205N 700L1
ANGULAR ROLLER LEVER 207/1, 207/2,, 207/1N & 207/2N 200ALR
LONG ROLLER LEVER 208/208N 200LLR
PC 600 SERIES
NORMAL ROLLER LEVER 603N/609/609N 600NLR
SLIPPING ROLLER LEVER 604N/604 600SLR
38mm LEVER WITH ROLLER 605N/605 700L1
ANGULAR ROLLER LEVER 607/607N 600ALR
LONG ROLLER LEVER 608/608N 600LLR
38mm LEVER FOR 705 705 700L1
76mm LEVER FOR 708 708 700L2
ADJUSTABLE LEVER FOR 709 709 700LA
FORK TYPE LEVER (INLINE) 707/1 700LF
FORK TYPE LEVER (OFFSET) 707/2 700LFO
OPERATING HEAD - LEVER TYPE LEVER TYPE 700HTP-B
OPERATING HEAD - TOP PLUNGER 701 700HTP-R
OPERATING HEAD - TOP PLUNGER 702 700HTP-B
OPERATING HEAD - SIDE PLUNGER 703 700HSP-B
OPERATING HEAD - SIDE PLUNGER 704 700HSP-R
LIMIT SWITCH ASSLY ALL TYPES 700S1
OIL TIGHT CONDUIT ENTRY ALL TYPES 700CE
PC 900 SERIES
NORMAL ROLLER LEVER 901N-3A/901N-3A OL 600NLR
902N-3A/902N-3A OL
ANGULAR ROLLER LEVER 901N-7A/901N-7A OL 700ALR
902N-7A/902N-7A OL
Description Contacts Catalogue No.
RANGE AND ORDERING INFORMATION
-
9/13 www.LNTEBG.com
9
TECHNICAL DATA
Confirms to Standard IEC 947-5-1 / IS 13947-5
Utilization Category AC 15 and DC 13 Duty
Thermal Current 5 Amps & 10 Amps
Insulation Voltage 600 VAC and 250 VDC
Operating Temperature -20C to 80C
Terminal Capacity 2.5 mm2 solid or stranded
Protection Category IP4X, IP43, IP65 and IP67 according to housing design
Mechanical Life 15 Million Cycles
Contact Life 10 Million Cycles at 1 Amps rating
Head Operating Force 300 Gms to 2 Kgs
LIMIT SWITCHES
-
9/14www.LNTEBG.com
9
SALIENT FEATURES OF FOOT SWITCHES
Rubber cushions at bottom provide good support on ground while in operation, thus eliminating additional accessories.
Gasket between case and cover and a friction type seal on the treadle shaft / actuator plunger assure water and oil tightperformance.
Provision to accomodate one contact block on 1NO+1NC contact combination in compact foot switch - PCFS1.
Provision to accomodate two contact blocks facilates adjustment of lever assembly and provides simultaneous or differentialtripping of the contact blocks in heavy duty foot switch - PCFS2.
Domestic Foot Switch - PCFS3 provides a small microswitch for press to ON and release to OFF operations.
Meditwin - PCFS4 provides two pedals attached to a single housing and can be operated individually to control two independentcontact blocks.
Applications :
Open or close either AC or DC pilot circuits.
Enable machine operating sequences to be controlled by foot for industrial, domestic and medical appliances.
-
9/15 www.LNTEBG.com
9
ORDERING INFORMATION
1NO+1NC COMPACT TYPE FS-1/ONE
1NO+1NC (SPDT-SB) DOMSTC TYPE WITH CABLE FS-3/ONE
1NO+1NC MEDI TWIN FS-4/TWO
1NO+1NC HEAVY DUTY WITH PLAIN COVER FS-2/H1/ONE
1NO+1NC HEAVY DUTY WITH PLAIN COVER FS-2/H11/TWO
1NO+1NC HEAVY DUTY WITH GUARD FS-2/H11G/TWO
1NO+1NC HEAVY DUTY + GUARD 3 POSI FS-2/H11GZ/TWO
1NO+1NC HEAVY DUTY WITH SHIELD FS-2/H11S/TWO
1NO+1NC HEAVY DUTY WITH SHIELD 3 POSI FS-2/H11SZ/TWO
1NO+1NC HEAVY DUTY WITH PLAIN COVER 3 POSI FS-2/H11Z/TWO
1NO+1NC HEAVY DUTY WITH GUARD FS-2/H1G/ONE
1NO+1NC HEAVY DUTY WITH SHIELD FS-2/H1S/ONE
1NO+1NC HEAVY DUTY WITH PLAIN COVER FS-2/P1/ONE
1NO+1NC HEAVY DUTY WITH PLAIN COVER FS-2/P11/TWO
1NO+1NC HEAVY DUTY WITH GUARD FS-2/P11G/TWO
1NO+1NC HEAVY DUTY WITH GUARD 3 POSI FS-2/P11GZ/TWO
1NO+1NC HEAVY DUTY WITH SHIELD FS-2/P11S/TWO
1NO+1NC HEAVY DUTY WITH SHIELD 3 POSI FS-2/P11SZ/TWO
1NO+1NC HEAVY DUTY WITH PLAIN COVER FS-2/P11Z/TWO
1NO+1NC HEAVY DUTY WITH GUARD FS-2/P1G/ONE
1NO+1NC HEAVY DUTY WITH SHIELD FS-2/P1S/ONE
2NO+2NC HEAVY DUTY WITH PLAIN COVER FS-2/P2/ONE
2NO+2NC HEAVY DUTY WITH PLAIN COVER FS-2/P22/TWO
2NO+2NC HEAVY DUTY WITH GUARD FS-2/P22G/TWO
2NO+2NC HEAVY DUTY WITH GUARD 3 POSI FS-2/P22GZ/TWO
2NO+2NC HEAVY DUTY WITH SHIELD FS-2/P22S/TWO
2NO+2NC HEAVY DUTY WITH SHIELD 3 POSI FS-2/P22SZ/TWO
2NO+2NC HEAVY DUTY WITH PLAIN COVER FS-2/P22Z/TWO
2NO+2NC HEAVY DUTY WITH GUARD FS-2/P2G/ONE
2NO+2NC HEAVY DUTY WITH GUARD FS-2/P2S/ONE
2NO+2NC HEAVY DUTY WITH SWITCH FSR50FL
Description Catalogue No.
-
9/16www.LNTEBG.com
9
TECHNICAL DATA
Type of Foot switch PCFS1 PCFS2 PCFS3 PCFS4
Type of contact block PC600 PC600 or PC1500 Micro switch PC600
Utilization category AC 15 AC 15 AC 15 AC 15
DC 13 DC 13 DC 13 DC 13
Thermal Current Ith
10 A 10 A 10 A 10 A
Insulation Voltage Ui 500V AC 500V/600V AC 250V AC 500V AC
Contact Combination 1 NO + 1NC 1 NO + 1 NC or 1 NO + 1NC 1 NO + 1 NC
SPDT - DB* 2NO + 2NC SPDT - SB** SPDT - DB*
Terminal Capacity 2.5 sq. mm 2.5 sq. mm 2.5 sq. mm 2.5 sq. mm
Enclosure Category IP65 IP65 IP43 IP65
Mech. & Electrical Life 5 x 106 5 x 106 5 x 106 5 x 106
FOOT SWITCHES
-
9/17 www.LNTEBG.com
9
SALIENT FEATURES OF TIMERS
Time delay is independent of normal voltage and temperature fluctuations.
Large transparent knob on a graduated dial enables accurate time setting.
Black pointer gives clear indication of time set on a calibrated dial while the red one indicates the time left to complete the cycle.
Longer life of contacts is ensured by output through a relay.
All contacts are made of hard silver.
Automatic reset on de-energisation of the clutch coil.
Micro size synchronous motor is provided with specially made sintered bearings, well lubricated for noiseless operation.
All parts subjected to constant wear and tear are moulded of Delrin to ensure longer life.
Base mounting or flush mounting versions.
The synchronous timer is enclosed in a poly-carbonate enclosure, has compact dimensions and provides protection conformingto IP30 of IS:13947.
(Manufactured by General Industrial Controls Private Limited)
-
9/18www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
Electronic Timer True - Off Delay - 110V AC 1 21TDT0
Electronic Timer True - Off Delay - 240V AC 1 22TDT0
DescriptionQty per
packing
[No.]
Catalogue No.
Compact DIN rail mountable. Wide operating voltage range. High setting and repeat accuracy. Wide time setting. Low power consumption. Universal mounting.
Electronic Timer Series 175 - 110V AC 1 110DT4
Electronic Timer Series 175 - 240V AC 1 120DT4
Description Catalogue No.
MICON ELECTRONIC TIMERS
Qty per
packing
[No.]
ELECTRONIC TIMER TRUE - OFF DELAY
Electronic Timer Series 225 - Asymmetrical ON/OFF 1 24ADT0
Electronic Timer Series 225 - Star-Delta 1 20SDT0
Electronic Timer Series 225 - Multifunction 1 20MDT0
Electronic Timer Series 480 - Asymmetrical ON/OFF 1 40AFS0
Electronic Timer Series 480 - Star-Delta 1 40SFS0
Electronic Timer Series 480 - Multifunction 1 40MFS0
Electronic Timer Series 780 - Asymmetrical ON/OFF - 110/240V AC 1 70ADT0
Electronic Timer Series 780 - Asymmetrical ON/OFF - 240/415V AC 1 74ADT0
Electronic Timer Series 780 - Star-Delta - 110/240V AC 1 70SDT0
Electronic Timer Series 780 - Star-Delta - 240/415V AC 1 74SDT0
Electronic Timer Series 780 - Multifunction - 110/240V AC 1 70MDT0
Electronic Timer Series 780 - Multifunction - 240/415V AC 1 74MDT0
SERIES 175
SERIES 225
SERIES 480
SERIES 780
-
9/19 www.LNTEBG.com
9
ACCESSORIES
11 pin Universal Socket for Electronic Timers 1 0.048 FF9601
Accessory Type Description Qty per
packing
[No.]
Catalogue No.Wt approx
per Timer
[Kg]
Universal Socket
-
9/20www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
ON Delay Auto Reset Synchronous Timer 1 0.6 BSingle Range
ON Delay Auto Reset Synchronous Timer Multi Range
240V 1 Inst + 1 Del C/O Flush Mounting Standard 8 0.6 B 41F10008
On Delay
ON Delay Auto Reset Synchronous Timer Multi Range 1 0.6 Bin any other configuration other than above
AUTO-RESET
SYNCHRONOUS TIMER
Description Qty per
packing
[No.]
Catalogue No.
ELECTRO MECHANICAL TIMING DEVICES
Wt approx
per Timer
[Kg]
EM 1000
CATALOGUE NO. SUFFIXES FOR AUTO-RESET SYNCHRONOUS TIMER - EM 1000
ON Delay Type, 240V AC 6A (Resistive). Base and DIN Rail mounting.
ON Delay Auto Reset Synchronous Timer 1 0.3 C B1
AUTO-RESET
SYNCHRONOUS TIMER
Description Qty per
packing
[No.]
Catalogue No.Wt approx
per Timer
[Kg]
EM 2000
CATALOGUE NO. SUFFIXES FOR AUTO-RESET SYNCHRONOUS TIMER - EM 2000
-
9/21 www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
HM 700 Synchronous for 240V or 110V AC Control Supply 1 0.085 E5 S 1
HM 700 Synchronous for 24V AC Control Supply 1 0.085 E51S 1
HM 700 Synchronous for 415V AC Control Supply 1 0.085 E55S 1
HM 700 Quartz for 12-36V DC Control Supply 1 0.085 E61Q 1
HM 700 Quartz for 6-12V or 36-80V DC Control Supply 1 0.085 E6 Q 1
HM 700 Quartz for 110V DC Control Supply 1 0.085 E63Q 1
HM 700 Quartz for 220V DC Control Supply 1 0.085 E64Q 1
HOUR METERS Description Qty per
packing
[No.]
Catalogue No.
ELECTRO MECHANICAL TIMING DEVICES
Wt approx
per Timer
[Kg]
Precision time counter with a white digit register which indicates the whole hour and a red digit register which indicates hundredth and tenthof an hour.
Fully insulated plastic enclosure with IP 54 protection. Flush Mounting (in 45x45mm cutout) with metallic bracket/base. Compact construction.
HM 700
HM 48
HM 48 Synchronous for AC Control Supply 1 0.070 K5 S 1
CATALOGUE NO. SUFFIXES FOR HOUR METERS
ACCESSORIES
Description
Qty per
packing
[No.]Catalogue No.
Wt approx
per Timer
[Kg]
For HM 700 Mounting frame size 55x55mm 1 - EF1900
Mounting frame size 72x72mm 1 - EF1901
Vibration proof buffer with mounting 1 - EF9000
Base mounting bracket 1 - EF2002
-
9/22www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
One daily dial, 240V AC - QT J648F1 J648B1
One weekly dial, 240V AC - QW J848F1 J848B1
One daily dial 110V AC - QT J638F1 J638B1
One weekly dial 110V AC - QW J838F1 J838B1
UNIVERSAL TIME SWITCHES Description Catalogue No.
TIME SWITCHES - TYPE FM/1
1 set of changeover, 240V AC, 16A (Resistive). Enclosure IP 55 with gland plate and locking arrangement. Modular construction. Power reserve upto 150 hrs. Inbuilt over-ride facility. High switching capacity. Analog and Digital versions. Tamper proof sealing.
FM/1 QT, QW
FM/1 digi20
Digital 240V AC D847F1 D847B1
Digital 110V AC D837F1 D837B1
Flush Mounting Base/DIN Rail Mounting
Enclosure for Time Switch A648B1WE
Description Catalogue No.
FM/1 WE
ACCESSORIES
-
9/23 www.LNTEBG.com
9
TECHNICAL DATA
Type True - Off Delay Series 175
Range 0.3 min. - 3 min. 3 sec. - 30 hrs.
Operating Voltage Range 110V AC / 240V AC 110V AC / 240V AC
Contact Output 1 C/o. - AgCdO 1 C/o. - AgCdO
Contact Rating 10A, 240V AC / 28V DC 5A, 240V AC / 28V DC
Indication Power ON LED LED for power ON and relay status
Mounting Base / DIN rail Base / DIN rail
ELECTRONIC TIMERS
Type Asymmetrical ON/OFF Star-Delta Multifunction
Range 0.1 sec. - 10 hrs. 0.3 sec. - 120 sec. 0.1 sec. - 10 hrs.
Pause Time 60, 90, 120, 150 msec.
Operating Voltage Range
for series 225 and 480 24V - 240V AC/DC 110 & 240V AC 24V - 240V AC/DC
for series 780 110/240V AC, 240/415V AC 110/240V AC, 240/415V AC 110/240V AC, 240/415V AC
Contact Output
for series 225 1 C/o - AgCdO 1 NO () + 1NO () - AgCdO 1 C/o - AgCdO for series 480 2 C/o - AgCdO 1 NO () + 1NO () - AgCdO 2 C/o - AgCdO for series 780 1 Inst + 1 Dly - AgCdO 1 NO () + 1NO () - AgCdO 1 Inst + 1 Dly - AgCdO
Contact Rating
for series 225 and 480 5A, 240V AC / 28V DC 5A, 240V AC / 28V DC 5A, 240V AC / 28V DC
for series 780 10A, 240V AC / 28V DC 10A, 240V AC / 28V DC 10A, 240V AC / 28V DC
Indication LED for power ON and LED for star & delta LED for power ON
relay status indication relay status
Mounting
for series 225 and 780 Base / DIN rail Base / DIN rail Base / DIN rail
for series 480 - Base / DIN rail with 11 pin Base / DIN rail with 11 pin Base / DIN rail with 11 pin
Universal socket Universal socket Universal socket
- Flush Mounting with Flush Mounting with Flush Mounting with
Solderable Socket Solderable Socket Solderable Socket
MICON ELECTRONIC TIMERS SERIES - 225, 480 & 780
-
9/24www.LNTEBG.com
9
TECHNICAL DATA
Type EM 1000 EM 2000
Type of delay ON DELAY ON DELAY
Voltage range -20% - +10% 80% - 110% of nominal
Frequency range 95% - 105% 95% - 105%
Maximum frequency of operations per hour 3000 1000
Pointer reset time 250 m sec at max. setting Less than 4% of set time
Ambient service temperature -5C to +45C -5C to +45C
Protection Enclosure - IP 30 - IS:13947 Enclosure - IP 30 - IS:13947
VA Rating - AC Loads
Cos 0.7 - 1.0 24V 150 12048V 250 240
110V 500 500
240V 500 500
Cos 0.4 - 0.7 24V 50 4048V 80 75
110V 150 150
240V 200 200
VA Rating - DC Loads
Non-inductive 24V 100 85
48V 100 85
110V 80 65
220V 80 65
Inductive 24V 30 24
48V 50 40
110V 40 30
220V 40 30
AUTO-RESET SYNCHRONOUS TIMER
-
9/25 www.LNTEBG.com
9
TECHNICAL DATA
Voltage Range 80% - 110% 80% - 110% 80% - 110%
Drive Synchronous Motor Synchronous Motor Stepper Motor
(Controlled by quartz crystal)
Consumption 1 VA 5 VA 2 W
Register 7 digit (2 decimal) 7 digit (2 decimal) 7 digit (1 decimal)
Read out 999999.99 99,999.99 999999.9
Least count 1/100 hrs. 1/100 hrs. 1/10 hrs.
Accuracy Directly proportional to Directly proportional to +/-1.0 sec./24 Hrs. at 25C
supply frequency supply frequency
Vibration 10 to 2000 Hz with 0.5 g 10 to 50 Hz, amplitude 0.35mm 10 to 50 Hz, amplitude 0.35mm
Shocks - 50 blows at acceleration 7 g for 50 blows at acceleration 7 g for
vibration proof buffer mounting vibration proof buffer mounting
Protection IP 20 IP 54 as per IS 13947, IP 54 as per IS 13947,
double insulation double insulation
Ambient Service Temperature 20C to +55C -5C to +45C -5C to +45C
HOUR METERS
HM 48HM700
AC Model Synchronous DC Model QuartzType
-
9/26www.LNTEBG.com
9
TECHNICAL DATA
Type FM/1 Quartz FM/1 Digi
Operating Voltage 240V AC 240V AC
Supply Frequency 45 - 65 Hz 45 - 65 Hz
Power consumption 2 VA 4.4 VA
Ambient Service Temperature -20C to +55C -10C to +55C
Clock accuracy 2.5 Sec./day at 20C 2.5 Sec./day at 20C
Switching contact 1 C/o contact - AgCdO 1 C/o contact - AgCdO
Charging period 70 hrs. 140 hrs.
Shortest Switching Time:
- Daily 15 min. 1 min.
- Weekly 2 hrs. 1 min.
Memory locations 20
Contact rating :
- Resistive 16A / 250V AC 16A / 250V AC
- Inductive (cos=0.6) 8A / 250V AC 8A / 250V AC
- Incandescent Lamp 1350 W 1000 W
Manual Over-ride Provided Provided
Mounting Flush, Base / DIN rail Flush, Base / DIN rail
TIME SWITCHES - TYPE FM/1
-
9/27 www.LNTEBG.com
9
SALIENT FEATURES
Elegant and light weight.
Measuring high standards of reliability.
Components are made of superior grade of engineering plastics which enhances mechanical life.
Specially devised mounting arrangement reduces mounting time.
Modular blocks are snap fit and allow various contact combinations.
(Manufactured by Esbee Industrial Combines)
MODULAR REMOTE CONTROL UNITS
-
9/28www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
Flush Head (Non Illuminated) HD15C
Flush Head (Illuminated) HD16C
Projecting Head Push Function (Non Illuminated) HD45C
Projecting Head Push Function (Illuminated) HD46C
Projecting Head Push-Push Function (Non Illuminated) HF45C
Projecting Head Push-Push Function (Illuminated) HF46C
Mushroom Head Push Function (Non Illuminated) HD55C
Mushroom Head Push Turn (Non Illuminated) HH55C
Mushroom Head with Lock & Key (Non Illuminated) HQ55C
Mushroom Head Push Pull (Non Illuminated) HG55B
Twin Touch (Non Illuminated) HD15GO
Twin Touch with Pilot Lamp (Illuminated) HD16G
Tip Head (Non Illuminated) HP95C
Lock & Key (Push Turn) HH85C3
Actuator Type Description Catalogue No.*
PUSH BUTTON ACTUATORS 22.5 mm
* For colour code suffix refer page 9/31
-
9/29 www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
Symmetric Head (Non Illuminated) H 65C
Symmetric Head (Illuminated) H 66C
Lever Head (Non Illuminated) H 75C
Lock & Key Rotary Type (Non Illuminated) H 85C3
Actuator Type Description Catalogue No.*
SELECTOR ACTUATORS
2 POSITION 3 POSITION
POSITIONS OF SELECTOR ACTUATORS
Non Spring Return Spring Return Non Spring Return Spring ReturnSpring Return
From L.H.
Spring Return
From R.H.
* For position and colour code of selector actuator suffix refer page 9/32
-
9/30www.LNTEBG.com
9
ACCESSORIES
Red HH152002
Green HH153003
Black HH154004
Yellow HH155005
Colourless HH150100
SHROUD Colour Catalogue No.
For Selector Actuator
Grey HH180002
Black HH182009
Chrome Plated ABS HH196010
BLANKING PLUGS Colour Catalogue No.
For Push Button Actuator
Black HB192000
Chrome Plated ABS HB196000
Chrome Plated Brass HB326000
COLLAR Colour Catalogue No.
For Flush/Projecting HeadPush Button
Grey HH180000
Black HH182004
Chrome Plated ABS HH196006
ADAPTOR RING Colour Catalogue No.
For 30 to 22mm in Panel cutoutconversion
Black HB10258
Yellow HB105163
Orange HB108169
Colourless HB100161
CENTER INDICATION STRIP Colour Catalogue No.
For Twin Touch Push Button
-
9/31 www.LNTEBG.com
9
SPARES
Red HB103002 HB103103
Green HB104000 HB104101
Black HB102006 Not Available
Yellow HB105008 HB105109
White / Opal HB101004 HB101105
Blue HB107010 HB107111
Orange HB108012 HB108113
Colourless Not Available HB100107
LENS CAP ColourCatalogue No.
Non Illuminated Illuminated
Catalogue No. Suffixes
Red 1 1 1 - 1
Green 2 2 2 - 2
Black - 3 3 - 3
Yellow 4 4 4 4 -
White / Opal 5 5 - - 5
Blue 6 6 - - -
Orange 7 7 - 7 -
Colourless 8 - - 8 -
PUSH BUTTON ACTUATORS
Colour Code
ORDERING INFORMATION:
Example: a) With Black ABS Collar Catalogue No. is HD15C1b) With Chrome Plated ABS Collar (replace C by A) Catalogue No. is HD15A1c) With Chrome Plated Brass Collar (replace C by B) Catalogue No. is HD15B1
For Flush Head Non-Illuminated Red Actuator Catalogue No. is HD15C1
2 Position Spring Return I 3 Position Non Spring Return L
3 Position Spring Return J 3 Position Spring Return from L.H. Side M
2 Position Non Spring Return K 3 Position Spring Return from R.H. Side N
SELECTOR ACTUATORS
Position of Selector Actuator
ORDERING INFORMATION:
For Symmetric Head (Non-Illuminated) Last Digit only three colours available : Red-1, Black-3 & White/Opal-5For Symmetric Head (Illuminated) Last Digit only four colours available : Red-1, Green-2, White/Opal-5 & Colourless-8For Lever Head (Non-Illuminated) Last Digit only two colours available : Black-3 & White/Opal-5
Second Digit of
Catalogue No.Position of Selector Actuator
Second Digit of
Catalogue No.
Flush/Projecting Head
Illuminated Non-Illuminated
Mushroom Head
Non-Illuminated
Twin Touch with
centre Indication
Illuminated
Tip Head
Non-Illuminated
Colour Code Suffix
-
9/32www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
Ribbed Lens (With Trim Collar) HB07E
Ribbed Lens (Without Trim Collar) HB07F
MODULAR INDICATORS Description Catalogue No.*
INDICATORS 22.5 mm
* For colour code suffix refer page 9/33
Red HW03F1X1 HW03F1W1
Green HW03F2X1 HW03F2W1
Yellow HW03F4X1 HW03F4W1
Blue HW03F6X1 HW03F6W1
Orange HW03F7X1 HW03F7W1
LED INDICATORS
(LOW VOLTAGE -
GLOW PROTECTION)Colour
Catalogue No.
AC
240V 110V
Red HS03F1X1 HS03F1W1 HS03F1V1 HS03F1U1 HS03F1T1
Green HS03F2X1 HS03F2W1 HS03F2V1 HS03F2U1 HS03F2T1
Yellow HS03F4X1 HS03F4W1 HS03F4V1 HS03F4U1 HS03F4T1
Blue HS03F6X1 HS03F6W1 HS03F6V1 HS03F6U1 HS03F6T1
Orange HS03F7X1 HS03F7W1 HS03F7V1 HS03F7U1 HS03F7T1
LED INDICATORSColour
Catalogue No.
AC
240V 110V
AC/DC
48V 24V 12V
Ribbed Lens (With Trim Collar) HS03E
Ribbed Lens (Without Trim Collar) HS03F
Ribbed Lens (With Trim Collar) - 240V HV03E X
Ribbed Lens (Without Trim Collar) - 240V HV03F X
INTEGRAL INDICATORS Description Catalogue No.*
* For supply voltage and colour code suffix refer page 9/33
Note : 110V/220Vdc LED Indicators available on request.
-
9/33 www.LNTEBG.com
9
ACCESSORIES
6V AC/DC HC550001
12V AC/DC HC550002
24V AC/DC HC550003
48V AC/DC HC550004
130V AC/DC HC550005
FILAMENT LAMPS Description Catalogue No.
BA 9S type
HH192000
FIXING DEVICE Description Catalogue No.
HH157000
LAMP EXTRACTOR Description Catalogue No.
SPARES
Red HE903108 HE103108
Green HE904109 HE104109
Yellow HE905110 HE105110
Opal HE901111 HE101111
Blue HE907112 HE107112
Orange HE908113 HE108113
Colourless HE900101 HE100101
RIBBED LENS ColourCatalogue No.
With Trim Collar Without Trim Collar
Catalogue No. Suffixes
Red 1 6V AC S
Green 2 12V AC T
Yellow 4 24V AC U
White/Opal 5 48V AC V
Blue 6 110V AC W
Orange 7
Colourless 8
Colour Code 6th Digit of Catalogue No. Supply Voltage for Indicator 7th Digit of Catalogue No.Suffix usedSuffix used
-
9/34www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
NO Blocks HC61A2
NC Blocks HC61B2
MODULAR CONTACT BLOCK Description Catalogue No.
MODULAR CONTACT BLOCK
6V,2W AC/DC HC61S1
12V,2W AC/DC HC61T1
24V,2W AC/DC HC61U1
48V,2W AC/DC HC61V1
130V,20mA AC/DC HC61W1
MODULAR BLOCKS
(Bulb holders with seriesresistor) Description
Catalogue No.
130V,20mA AC/DC - 240V AC Supply HC61X1
MODULAR BLOCKS
(Bulb holders with inbuilt
Resistor & Diode)
Description Catalogue No.
6-110V AC/DC Supply HC61R1
MODULAR BLOCKS
(Bulb holders without Resistor/Diode) Description
Catalogue No.
ACCESSORIES
First Row Clip (For Mounting) HC922002
Second Row Clip (For Vertical Cascading) HC122030
Side Row Clip (For Horizontal Cascading) HC929002
CLIPS Description Catalogue No.
110V, 6V, 1VA HC51W1
240V, 6V, 1VA HC51X1
110V, 12V, 1VA HC52W1
240V, 12V, 1VA HC52X1
TRANSFORMER BLOCK Description Catalogue No.
Dummy Block HC71C2
DUMMY BLOCK Description Catalogue No.
To be used with Transformer Block
-
9/35 www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
Flush Head Actuator - Red, with legend - STOP, Contact - 1 NC JAA10000
Flush Head Actuator - Green, with legend - START, Contact - 1 NO JAB20000
Station Type Description Catalogue No.
PUSH BUTTON STATIONS
Two Position Symmetric Head Selector Switch - Black, with legend - OFF / ON, JAH20000
Contact - 1 NO
Illuminated Actuator - Red, with legend - OFF, Contact - 1 NC JAC50000
Bulb Holder with Bulb 240V AC
Illuminated Actuator - Green, with legend - ON, Contact - 1 NO JAD60000
Bulb Holder with Bulb 240V AC
Two Position Lock and Key Rotary Switch, with legend - OFF / ON, JAI20000
Contact - 1 NO
Mushroom Head Actuator Push Function on Yellow Cover, with legend - STOP, JAE10000
Contact - 1 NC for Emergency Stop
Mushroom Head Actuator Push Turn Type on Yellow Cover, JAF10000
with legend - STOP, Contact - 1 NC for Emergency Stop
-
9/36www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
Station Type Description Catalogue No.
PUSH BUTTON STATIONS
Pilot Light 240V AC, Colourless Lens
(Station One)JCZ4B2A1
Flush Head Actuator - Green, with Legend - START, Contact - 1 NO
(Station Two)JBB2F100
Flush Head Actuator - Red, with Legend - STOP, Contact - 1 NC
(Station Three)
Mushroom Head Actuator Push Pull Type on Yellow Cover, JAJ10000
with legend - STOP, Contact - 1 NC for Emergency Stop
Mushroom Head Actuator with Lock and Key on Yellow Cover, JAG10000
with legend - STOP, Contact - 1 NC for Emergency Stop
Flush Head Actuator - Green, with legend - START, Contact - 1 NO
(Station One)
JBB2A100
Flush Head Actuator - Red, with legend - STOP, Contact - 1 NC
(Station Two)
Flush Head Actuator - Green, with Legend - FORWARD, Contact - 1 NO
(Station One)
Flush Head Actuator - Red, with Legend - STOP, Contact - 1 NC JDB2A1B2
(Station Two)
Flush Head Actuator - Green, with Legend - REVERSE, Contact - 1 NO
(Station Three)
Flush Head Actuator - Green, with Legend - UP, Contact - 1 NO
(Station One)
Flush Head Actuator - Red, with Legend - STOP, Contact - 1 NC JEB2A1B2
(Station Two)
Flush Head Actuator - Green, with Legend - DOWN, Contact - 1 NO
(Station Three)
-
9/37 www.LNTEBG.com
9
ACCESSORIES
All Grey without hole HF999000
All Grey & 1 hole of 22.5 HF999001
All Grey & 2 holes of 22.5 HF999002
Translucent Red cover without hole and grey base HF993100
GENERAL PURPOSE
ENCLOSURESDescription Catalogue No.
All Grey single hole HF999004
All Grey & 2 holes of 22.5 HF999005
All Grey & 3 holes of 22.5 HF999003
Single hole yellow cover & grey base HF995001
PUSH BUTTON STATION
ENCLOSURESDescription Catalogue No.
NO Contact Block HC22A2
NC Contact Block HC22B2
1NO + 1NC Contact Block HC22C2
CONTACT BLOCK Description Catalogue No.
NO Contact Block HC22N1
NC Contact Block HC22O1
2NO Contact Block HC22D2
2NC Contact Block HC22E2
For Push Button Stations
For Bulb Holder with Bulb 240VAC+Contact Block
OFF-ON HH242001 HH242016 HH242031
FORW. - OFF-REV. HH242002 HH242017 HH242032
HAND - OFF - AUTO HH242003 HH242018 HH242033
STOP - START HH242004 HH242019 HH242034
FAST - OFF - SLOW HH242005 HH242020 HH242035
O - I HH242006 HH242021 HH242036
I - O - II HH242007 HH242022 HH242037
METAL PLATES DescriptionCatalogue No.
Small Large Square
Small
Large
Square
-
9/38www.LNTEBG.com
9
RANGE AND ORDERING INFORMATION
Shrouded Push Button Actuator - Black colour SS91519OAOO
Shrouded Push Button Actuator - Red colour SS91519OBOO
Shrouded Push Button Actuator - Green colour SS91519OCOO
Shrouded Push Button Actuator - Yellow colour SS91519ODOO
Shrouded Push Button Actuator - Blue colour SS91519OEOO
Shrouded Push Button Actuator - Grey colour SS91519OFOO
Actuator Type Description Catalogue No.
PUSH BUTTON ACTUATORS 30 mm - TYPE TK3
ACCESSORIES
Rubber Cap With fixing ring in red, green and black colours SS91540OOOO
Latching Device For unshrouded push buttons SS91539OOOO
Start SS00597OOOO
Stop SS00598OOOO
Forward SS00599OOOO
Reverse SS00600OOOO
Fast SS00601OOOO
Legend Plate Slow SS00602OOOO
ON SS00603OOOO
OFF SS00604OOOO
Raise SS00605OOOO
Lower SS00606OOOO
Blank plate with single line space SS00596OOOO
Blank plate with double line space SS00607OOOO
Accessory Type Description Catalogue No.
Selector Actuator - Two-position switch SS91516OAOO
Selector Actuator - Three-position switch SS91517OAOO
Mushroom Push Button Actuator - Black colour SS91518OAOO
Mushroom Push Button Actuator - Red colour SS91518OBOO
Mushroom Push Button Actuator - Green colour SS91518OCOO
Unshrouded Push Button Actuator - Black colour SS91520OAOO
Unshrouded Push Button Actuator - Red colour SS91520OBOO
Unshrouded Push Button Actuator - Green colour SS91520OCOO
Unshrouded Push Button Actuator - Yellow colour SS91520ODOO
Unshrouded Push Button Actuator - Blue colour SS91520OEOO
Unshrouded Push Button Actuator - Grey colour SS91520OFOO
Key Actuator - Lockable OUT and IN positions SS91521OOOO
Key Actuator - Lockable OUT position SS91522OOOO
-
9/39 www.LNTEBG.com
9
RANGE AND ORDERING INFORMATIONPUSH BUTTON PENDANTS
Type Description Catalogue No.
Wt approx
per Pendant
[Kg]
Ideally suited for control of cranes, hoists, trolleys and machine tools. Interchangeability of two push button units to four or six units on site. Buttons are completely shrouded and cannot be operated accidentally. Enclosure of pendant, is oil and acid resistant, impact proof and insulated.
2 Unit Push Buttons Pendant 0.30 SS90502OOOO
4 Unit Push Buttons Pendant 0.55 SS90504OOOO
6 Unit Push Buttons Pendant 0.80 SS90506OOOO
-
9/40www.LNTEBG.com
9
TECHNICAL DATAACTUATOR, INDICATORS, MODULAR & FRONT CONNECTION BLOCKS
-
9/41 www.LNTEBG.com
9
TECHNICAL DATA
Rated Voltage 12 V Ac /Dc, 24 V Ac / Dc, 48 V Ac / Dc
110 V Ac, 240 V Ac 50/60 Hz. (110 Dc / 220V Dc)
Operating Voltage -20% To +10% Of Rated Voltage
Power Consumption 9VA Max.
Insulation Resistance 100 M W At 500 V Dc
Dielectric Strength 1.5 Kv Ac
Operating Temp. -10C To 55C
Storage Temp. -25C To 70C
Indicator Colours Red, Green, Yellow, Blue, Orange, White.
Panel Cut-out Required F 22.5 Mm
Overall Dimension F 29 X 70 Mm (Approximately)
Weight 25 Grms.
Ingress Protection Ip 30 - (For Terminals)
Ip 65 - (Top Surface Of Indicators)
Life 1,00,000 (Burning Hrs.)
LED INDICATORS
-
9/42www.LNTEBG.com
9
TECHNICAL DATAPUSH BUTTON STATIONS & GENERAL PURPOSE ENCLOSURES
-
9/43 www.LNTEBG.com
9
OVERALL DIMENSIONSCABLE DUCTS
TYPE A
TYPE B
BOTTOM SLOTS FOR B40 AND B60 BOTTOM SLOTS FOR B150
BOTTOM SLOTS FOR B80BOTTOM SLOTS FOR B25
THIN SLOT BOTTOM MOUNTING SLOTS FOR ALL SIZESSTANDARD SLOT
Note: All dimensions are in mm.
-
9/44www.LNTEBG.com
9301H 301V 302P 303
101H 102V 103LS 104B
100 SERIES
300 SERIES
OVERALL DIMENSIONSLIMIT SWITCHES
Note: All dimensions are in mm.
200AR 200NLR 200SLR
200 ALR 200 LLR 206
401
200 SERIES
205 SERIES
-
9/45 www.LNTEBG.com
9
OVERALL DIMENSIONSLIMIT SWITCHES
Note: All dimensions are in mm.
600 SERIES 600 LLR 900 SERIES 901 N - 10A
605 SERIES
705 SERIES
700 L1(200,600,700)
700 L2(600 & 700)
700 LF(600 & 700)
700 LF0(600 & 700)
700 SN(700)
700 LA(600 & 700)
700 SERIES 700 HTPB 700 HTPR 700 HSPB 700 HSPR
-
9/46www.LNTEBG.com
9
OVERALL DIMENSIONSLIMIT SWITCHES
2NO+2NCPC 1500 SERIES
TOP PUSH BUTTONOPERATOR
TOP PUSH ROLLEROPERATOR (HOR) 9 INCH LEVER OPERATOR
ROLLER LEVER OPERATOR
Note: All dimensions are in mm.
-
9/47 www.LNTEBG.com
9
OVERALL DIMENSIONSFOOT SWITCHES
PCFS-1COMPACT TYPE
PCFS-3DOMESTIC TYPE
PCFS-4MEDI TWIN
PCFS-2HEAVY DUTY SHIELD
PCFS-2HEAVY DUTY GUARD
Note: All dimensions are in mm.
-
9/48www.LNTEBG.com
9
OVERALL DIMENSIONSELECTRONIC TIMERS
TRUE OFF DELAY - BASE / DIN MOUNTING
Note: All dimensions are in mm.
MICON SERIES 175 - BASE / DIN MOUNTING MICON SERIES 225 - BASE / DIN MOUNTING
MICON SERIES 480 - FLUSH MOUNTING MICON SERIES 780 - BASE / DIN MOUNTING
-
9/49 www.LNTEBG.com
9
OVERALL DIMENSIONSELECTRO MECHANICAL TIMING DEVICES
EM 2000
Note: Panel Cutout 91mm Diameter
EM 1000 - Flush Mounting
EM 1000 - Base Mounting
Note: All dimensions are in mm.
-
9/50www.LNTEBG.com
9
OVERALL DIMENSIONSHOUR METERS
HM 700
PANEL (FLUSH) MOUNTING
Panel cut-out
MOUNTING FRAMES55 x 55 or 72 x 72 mm.
Panel cut-out
BASE (WALL) MOUNTING
Mounting holes plan
VIBRATION PROOF MOUNTING
Panel Cut-out
Note: All dimensions are in mm.
HM 48
TIME SWITCHES
FLUSH MOUNTINGBASE/DIN MOUNTING
-
9/51 www.LNTEBG.com
9
OVERALL DIMENSIONSPUSH BUTTON ACTUATORS 22.5 mm
Note: All dimensions are in mm.
SELECTOR ACTUATORS 22.5 mm
Flush Head Projecting Head Push Function Projecting Head Push-Push Function Mushroom Head Push Function
Mushroom Head Push Turn Mushroom Head with Lock & Key Mushroom Head Push Pull Twin Touch
Symmetric Head Lever Head Lock & Key Rotary Type
Twin Touch with Pilot Lamp Tip Head Lock & Key
-
9/52www.LNTEBG.com
9
OVERALL DIMENSIONS
Note: All dimensions are in mm.
INDICATORS
Modular Indicators Integral Indicators Integral Indicators (240V)
-
9/53 www.LNTEBG.com
9
OVERALL DIMENSIONSPUSH BUTTON ACTUATORS 30 mm - TYPE TK3
Note: All dimensions are in mm.
Description L P
Key Actuator 49 34.5 (w/o key)
Unshrouded Actuator 35 20.5
Shrouded Actuator 28 13.5
Mushroom Actuator 33.5 19
Selector Actuator 49 29.5
DRILLING PLAN
-
9/54www.LNTEBG.com
9
OVERALL DIMENSIONSPUSH BUTTON PENDANTS
Note: All dimensions are in mm.
Description A
2 Unit Push Buttons Pendant 159
4 Unit Push Buttons Pendant 273
6 Unit Push Buttons Pendant 391