CTI CEtJTRE TE:;'lrJG l!HfRtlAT<ullAl

Test Report

Report No.: EED35K000208-1

Customer

Address

Access Lighting Corporation

14410 Myford Road, Irvine, CA 92606 USA

Description of the submitted sample(s):

Sample Name

Model/Type

Manufacturer

Brand

: LED Luminaire

: 20080LED/20082LED/20084LED

access

: 100-277 V AC, 50/60 Hz, 13 W, 3000 K

Page 1 of 9

Ratings

Test Item : Total Luminous Flux, Luminous Efficacy, Zonal Lumen Density, Luminous

Sample Quantity

Sample No.

State of Sample(s)

LED Driver Model

Sample Received Date

Sample Tested Date

Test Requested

Intensity Distribution and Electrical Parameters

: 1 pc

: 35K0208-01

: Normal

: RG-15W300/RG-15W300A/RG-15W300

: Sept. 21, 2018

: Sept. 25, 2018

: All test items were measured according to

IES LM-79-08 Electrical and Photometric Measurements of Solid-State

Lighting Products

Laboratory Note: The laboratory that conducted the testing items in this report has been accredited by the

National Voluntary Laboratory Accreditation Program (NVLAP LAB CODE: 200889-0), for IES LM-79 testing

of SSL products. And the report must not be used by the client to claim product certification, approval, or

endorsement by NVLAP, NIST, or any agency of the Federal Government.

Reviewed by

CENTRE TESTING INTERNATIONAL CO

Approved by

Date

Supervisor/Vivian Wang

Sept. 27, 2018

Check No.: 2448716088

NO.1996, Xinjin qiao Road, Pudong New District,

Shanghai, 201206, China

CTI CWT- c TESWIG IIITERNATICilAl

Test Report

Report No.: EED35K000208-1

Equipment list:

Test Equipment

Goniophotometer

Standard Lamp

Digital Power Meter

1 Test Condition

Ambient Condition

Photometric Method

Tested

Stabilization Time

Equipment Model

GO-R5000

D908

WT210

Total Operation Time including Stabilization

2 Test Method

2.1 Requirements of Ambient Condition

Equipment No.

ATTEELSH00 105

ATTEELSH00106

BTTEELSZ 10093

: 25.2 ·c

: Goniophotometer

: 120 V AC, 60 Hz

: 30 minutes

: 70 minutes

Page 2 of9

Calibration Due Date

Jul. 08, 2019

Jul. 03, 2019

May 29, 2019

The ambient temperature in which measurements are being taken shall be maintained at 25 ·c ± 1 ·c, measured

at a point not more than 1 m from the SSL product and at the same height as the SSL product. Air flow around

the SSL product being tested should be such that normal convective air flow induced by device under test is not

affected.

2.2 Seasoning of SSL Product

For the purpose of rating new SSL products, SSL products shall be tested with no seasoning. Therefore, no

seasoning was performed.

2.3 Stabilization of SSL Product

Before measurements are taken, the SSL product under test shall be operated long enough to reach stabilization

and temperature equilibrium. The time required for stabilization depends on the type of SSL products under test.

The stabilization time typically ranges from 30 minutes to 2 or more hours for SSL product. It can be judged

that stability is reached when the variation (maximum - minimum) of at least 3 readings of the light output and

electrical power over a period of 30 minutes, taken 15 minutes apart, is less than 0.5%.