ctc union 2011 product catalog

Since 1993

PRODUCT CATALOG

Your Reliable SupplierNetwork communication solutions

Industrial Fiber Fiber Media Conversion Fiber Optical Multiplexer Carrier Ethernet CWDM

FTTX SDH xDSL iMux EPON

CompliantMETRO ETHERNET FORUM

MEMBER

ISO 9001

w w w.c tcu.com

Content2 2 2Ethernet Switch

Fiber SeriesChapter

1

Industrial FiberNew New

Industrial Fiber Media Converter .......................................................................... IFC-1200, IFC-1200-X Industrial Fiber Ethernet Switch ............................................................................. IFC-1400, IFC-1400-X RS485/422/232 Fiber Converter ............................................................................ IFC-Serial, IFC-Serial-X RS485/422/232 Daisy Chain Fiber Converter .................................................. IFC-Serial/FDC, IFC-Serial/FDC-X RS485, RS232 to IP

1-1 1-5 1-9 1-13

Industrial Serial Device ServerNew

Chapter

2

.................................................................................................. STE100A/RS-485, STE100A/RS-232 1-17

Multi-Service Platform FRM220.................................................................. FRM220 In-band Managed Multiservice Platform CH01,02,04 Standalone Slide-in card Chassis .................................................................................. NMC FRM220-NMC Network Management Controller .............................................................................. ............................................................... FRM220 NMC Management Application SV-Fiber EMS Examples for FRM220 .............................................................................................. 10G CWDM 10G Transponder ................................................................................................... MD40,MD80 CWDM Mux/DeMux .......................................................................................................... 1000EAS/X Gigabit Ethernet over Fiber ............................................................................................ .................................................................................................... 10/100i,10/100A Fast Ethernet over Fiber FXO/FXS POTS over Fiber .................................................................................................................... ............................................................................................................ V35 Datacom over Fiber Serial RS485 over Fiber ..................................................................................................................... .................................................................................................................. E1/T1 PDH over Fiber ET100 Ethernet over PDH ................................................................................................................ FOM04 Ethernet/ PDH Multiplexer ................................................................................................ ........................................................................................... FTEC E1/T1 Cross Rate Converter .............................................................................................. iMux5 E1 Inverse Multiplexer .............................................................................................. E1/Data CSU/DSU E1 Access Unit

2-1 2-3 2-5 2-6 2-7 2-9 2-14 2-44 2-21 2-26 2-27 2-30 2-28 2-29 2-33 2-34 2-40 2-35

New New

New

New

-Platform

FRM220AEthernet Aggregation Platform ........................................................................................ 2-37 FRM220A Ethernet Aggregate Switch ............................................................................................. 2-39 FRM220A-GSW/SNMP E1 Inverse Multiplexer ......................................................................................................... 2-40 FRM220A-iMux5 Ethernet over E1 Access Unit .......................................................................................... 2-43 FRM220A-Eoe1 Gigabit Ethernet Switch .................................................................................................... 2-44 FRM220A-1000EAS/XFRM220A-ESW202 Ethernet Demarcation Switch NIC ............................................................................... 2-47 ESW-104 Ethernet Demarcation Switch ......................................................................................... 2-49

New

-EDD -FTTX

Ethernet Demarcation (MEF-EDD)

Media Conversion PlatformNew

New

New

FMC FMC-08, FMC-17 Non-Managed Fiber Converter Concentrator ....................................................... ..................................................................................................... FMC-10/100i, FMC-10/100 Fast Ethernet over Fiber FMC-1000ES Gigabit Ethernet over Fiber .............................................................................................. FMC-10/100POF Plastic Optical Fiber ............................................................................................................. FMC-10/100P(POE) Power over Ethernet PD Converter .............................................................................. Web Smart Managed Media Converter ........................... FMC-100M, FMC-1000ESM OFC Fast Ethernet over Fiber ..................................................................................................... OFC-10/100i Power over Ethernet PSE Converter .............................................................................. OFC-1000PSE(POE) FRM401 Fast Ethernet Fiber Converter Concentrator ........................................................... FRM401 Fast Ethernet over Fiber ..................................................................................................... FRM401-10/100

2-50 2-52 2-56 2-53 2-55 2-57 2-58 2-59 2-60 2-62

New

FTTX Fast Ethernet over Fiber .................................................................................................... 2-63 FTH3-10/100,FTH4-10/100A

CWDM

www.ctcu.com

FOM

Media Conversion

Content2 2-

-Switch

Ethernet SwitchL2 Managed Ethernet Switch .......................................................................... ............. 2-67 GSW-3208M Non-Managed Ethernet Switch ..................................................................................... 2-71 FSW-2104

Integrated Access DeviceNew

Fiber IAD Gateway ........................................................................................................... 2-73 GW621FW SML5000 (Sigma Links) CWDM Managed Platform Concentrator(5U/2U) ................................................. SML5000,SML2000 Network Management Controller ............................................................................... SML-SNMP Transponder ............................................................................................................................ SML-TR12/ TR22 Mux/Demux ............................................................................................................................ SML-MD91/ MD51 Optical Add and Drop Mux ............................................................................................. SML-OADM Optical Protection ............................................................................................................... SML-Protection SML2100 CWDM Managed Platform Concentrator (2U) ....................................................... SML2100 Network Management Controller ................................................................................ SML21-SNMP Transponder ........................................................................................................................... SML21-10G/ 2.7G Mux/DeMux ........................................................................................................................... SML21-MD40/MD80

-CWDM

CWDM2-75 2-79 2-82 2-83 2-84 2-85 2-86 2-88 2-89 2-92

SML1000 Transponder Rack ................................................................................................................ 2-93 SML1000 SML4000 Mux/Demux Rack ................................................................................................................ 2-94 SML4000 Mux/DeMux ........................................................................................................................... 2-95 SML40-MD81

2 FOM

Fiber Optical MultiplexerGigabit Ethernet/ PDH Multiplexer .............................................................................. FMUX1000S Multi-service Access Multiplexer .................................................................................. FMUX01A/Plus PDH Multiplexer .................................................................................................................... FMUX04 Ethernet PDH Multiplexer ................................................................................................. FMUX04E Ethernet PDH Multiplexer Concentrator ..................................................................... FMUX202-97 2-99 2-104 2-105 2-101

2 SDH

Next Generation SDH MultiplexerNew NewSDH01A STM-1 NG-SDH ADM ........................................................................................................... 2-107 SDH04A STM-4/1 NG-SDH ADM ....................................................................................................... 2-109 SDH16A-RM STM-4/16 NG-SDH ADM Platform .................................................................................. 2-111

GEPON

Managed OLT Chassis ........................................................................................ OLT-200 2-113 ONU-311, ONU-241 ONU ............................................................................................................................................ 2-114 OLT-EMS GEPON Network Management System ...................................................................... 2-116 Hot-Pluggable Fiber Transceiver Modules.............................................................. 2-117 SFP/GBIC

Fiber Transceiver Fiber Attenuator

In-line Fiber Attenuators in Standard and Custom Values ................................ 2-121

ManagementChapter

3

Element Management System.......... EMS ...................................................................................................................................... 3-1 SV-Fiber, SV-FOM, SV-PDH, SV-CWDM

Graphic User InterfaceGUI ....................................................................................................................................... 3-6

IP NetworkingChapter

4

Ethernet over E1 ............................................................................................................. Eoe1A ............................... EOC-20,EOC-21,EOC-10A Ethernet over Coax ...................................................................................................... .................................................................................................. ................................. ET100,ET100/NRZ,ET100/G64 Ethernet Bridge

4-1 4-3 4-5

G.SHDSL.BIS ADSL2+ VDSL2 iMUX CSU/DSU Management U

PDH SeriesChapter

5

iMux (E1 Inverse Multiplexer) TDM over IP

............ ERM04 iMux Concentrator ............................................................................................ 5-35 ............. iMUX5 iMux Standalone Unit .......................................................................................... 5-36 .............. 5-41 IPM-1SE Single E1 over IP ............................................................................................... IPM-4SE 4E1 over IP ............................................................................................................... 5-42ERM01 E1 DSU/CSU concentrator .................................................................................. 5-1 TRM01 T1 (DSU) concentrator .......................................................................................... 5-7

E1/T1 Concentrator

Single Port E1/T1 Access UnitETU01A Single Modular port E1 CSU/DSU with SNMP ................................................. 5-12 ETU011 Single Modular port E1 CSU/DSU ....................................................................... 5-13 ETU01-Plus Single V35 port E1 CSU/DSU ................................................................................ 5-14

E1 to T1 Cross Rate ConverterNew NewETRM01 E1/T1 Cross Rate Converter Concentrator .................................................... 5-20 ETRM01-FTEC E1/T1 Cross Rate Converter Standalone Unit ................................................ 5-22 ERM-MUX/Plus 8E1 Multi-Service Multiplexer Platform ............................................................ 5-23 ETU02-MUX E1/Sub E1 Multiplexer ........................................................................................... 5-33 TTU02-MUX T1 Access Multiplexer ...................................................................................... G.703 64Kbps Co-directional

E1 Access Multiplexer5-34

New

...................................... 5-43 G703/64A-STD G.703 64Kbps Co-directional Standalone Unit ........................................................................ 5-44 G/DSL64 G.703 64Kbps G.SHDSL Modem

xDSL SeriesChapter

6

SHDSL

G.SHDSL.bis TDM ................. ....................... G.SHDSL.bis TDM Concentrator ...........................................................SHRM03b-TDM ................. ....................................................................................................................... SHDTU03b-E1/T1 E1/T1 (TR-069) ........ ....................... V35/ X21/ RS530 (TR-069) .........................................................................SHDTU03b-V35 ......... .......................... Ethernet Bridge ........................................................................................SHDTU03b-ET100 ............ SHDTU03b-31/SNMP Multi-Interface (SNMP) .......................................................................................1/.......... G.SHDSL.bis ATM ........... ....................... G.SHDSL.bis ATM Concentrator ...........................................................SHRM03b-ATM ........... SHDTU03b-ET10R(S) Ethernet Bridge/Router ..................................................................................................... G.SHDSL TDM SHRM03-TDM G.SHDSL TDM Concentrator ............................................................................. .................. SHRM03-E1 E1 (SNMP) ................................................................................................. ...................................................................... .................... SHRM03-V35 V35/ X21/ RS530 (SNMP) ....................... SHRM03-ET100 Ethernet Bridge ...................................................................................... G.SHDSL ATM ..................... SHRM03-ATM G.SHDSL ATM Concentrator ............................................................... ................................................................... ........................... SHRM03-ET10R(S) Ethernet Bridge/Router

6-1 6-4 6-7 6-8 6-9 6-11 6-14 6-16 6-18 6-18 6-18 6-23 6-24

LAN Extender ...................... EFM LAN Extender ........................................................................................EFM-10/20/40 6-29 .................... 6-32 New VDSL2 LAN Extender ........................................................................................ VDTU2A-301

VDSL

....... ....................... VDSL2 modem ..............................................................................................VDTU2-104/204 6-34

ADSL

ADSL2+ .......... MD20,MD15,MD15A IP DSLAM ................................................................................................................................... ....................................................................................................... ............... ATU-R170 ADSL2+ modem ADSL Splitter ........... ......................... ADSL Splitter Rack .....................................................................................ALS-R50,ALS-R60 ...........................................................................................ALS-12,ALS-10 ....... ..................... CPE ADSL Splitter .................................................................... .................... MDF-LP-10C Main Distribution Frame (MDF)

6-35 6-38 6-39 6-41 6-45

www.ctcu.com

Surge Protector

Balun

Testers

Surveillance

Content

BalunChapter

7

ITU-T G.703 Balun Patch Panel

............................ BP20-CH 7-3 24-port BNC to RJ45 E1 balun Rack ............................................................................. ............................. BLN-3010 7-2 1.6/ 5.6 Jack to Krone IDC .............................................................................................. ............................. Balun-P/S 7-1 Two BNC pigtail Balun .................................................................................................... ............................ Balun-B1 7-1 One BNC box Balun ....................................................................................................... ............................ Balun-B2 7-1 Two BNC box Balun ........................................................................................................

ITU-T G.703 Mini Balun (3 poles IDC) ITU-T G.703 Coax to Twisted Pair

Surge ProtectorChapter

8

Surge ProtectorNew

.............................. SP-POE-01 8-1 10/100Base-TX Ethernet POE ........................................................................................... .................8-1 SP-ETH-01 10/100Base-TX Ethernet .................................................................................................... .............. 8-1 New 10/100/1000Base-T Ethernet ........................................................................................... SP-GE-01 ............. SP-V35-01 8-3 V35 Data Line MB34 cable adapter ........................................................................... .............................. SP-SE-B01 G.703 E1 75 BNC ............................................................................................. 8-3 ........................ TSP-10 8-2 Telephone, FAX, Dialup modem ........................................................................

Tester SeriesChapter

9

Fiber Tester

................ 9-1 OTDR-30A OTDR ....................................................................................................................................... .................. 9-2 HCT-SDH155 SDH Tester ............................................................................................................................. ................... 9-3 OPM-300A/B Optical Power Meter ........................................................................................................ ................ OLS-100 9-3 Optical Laser Source ........................................................................................................ ............................................ HCT-7000,HCT-6000 9-5 E1/T1, Datacom ................................................................................................................. ....................... BTM10 9-9 E1/T1, Datacom .................................................................................................................. ............................................................................................................ ........................... LCT-300/400 9-15

Protocol Analyzer PCM Analyzer

LAN Cable Tester

Interface ConvertersChapter

10

V.35 Interface Converter

................................ V35/Data 10-1 V.35 to RS485 Interface Converter ............................................................................... ....................... RS232/Data 10-2 RS232 to V35 Interface Converter ................................................................................. ................. IC485-3 10-3 Async RS232 to RS422/ RS485, RJ-45 Interface Converter ....................................... ........................ IC232IP 10-4 Async RS232 Interface short haul modem .................................................................

RS232 Interface Converter

RS485 Interface Converters

RS232 Short Haul Modem/ Current Loop

IP SurveillanceChapter

11

Digital Video Server

..................................... DVS-8501E 11-7 H.264 Encoder ....................................................................................................................... ..................................... DVS-8501D 11-13 H.264 Decoder .......................................................................................................................

New

.............................. iDVS-01 11-17 Intelligence Digital Video Server ........................................................................... .............................................................................................. .......................... NVR 11-19 Network Video Recorder ....................................... IPCAM-8301 11-22 Network Camera ............................................................................................................. ................................. EOC-10 11-25 Ethernet over Coax .......................................................................................................

Balun Surge Protector

Tester

Interface Converter

Surveillance

- 40Outside plant applications

1

Industrial Fiber

+85

Industrial Fiber ConverterIndustrial Fast Ethernet Media Converter

Table of Contents

IFC-1200The IFC-1200 is industrial grade fiber media converter that provides 2-port 10/100Base-TX and 1-port 100Base-FX. The reliable hardware 10/100B TX d 1 t 100B FX Th design is suitable for keeping industrial automation application running continuously. Each IFC-1200 media converter comes with two relay output alarms and two redundant DC power inputs to help prevent damage and loss. The IFC-1200 media converter supports operating temperatures of 0 to 60 degree C.

Features 2-port 10/100Base-TX to 100Base-FX Converter Auto-Negotiation on two LAN port Auto MDI/MDIX Supports max forwarding packet length 1552 bytes Supports Q in Q double tagged frame transparent Supports IEEE 802.1q Tag VLAN pass thru Supports flow control (Pause) Supports Far End Fault Supports two Relay out (Arc-Free Contact)

Industrial Grade Performance Power or Optical Fiber failure alarm by relay output Supports DIN-Rail & wall mount Redundant dual DC power inputs

SpecificationsOptical Interface Connector: 1x9 (SC,FC,ST) Data rate: 100Mbps Duplex mode: Full duplex Fiber MM 50/125m, 62.5/125m. SM 9/125m Distance MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km Wavelength MM 1310nm, SM 1310,1550nm WDM 1310Tx/1550Rx (type A) 1550Tx/1310Rx (type B) LED Indications PWR 1/2, FX-Link/Act, LAN1-Link/Act, LAN2-Link/Act, Alarm(Power or Optical Fiber Failure Alarm)

Standard IEEE 802.3, IEEE 802.3u

Environmental Temperature Operating: 0 ~ 60C Storage: -10 ~ 70C Humidity 0 ~ 90% non-condensing Approvals Safety CSA C22.2 No.60950-1, EN60950-1 EMI FCC Part 15, CISPR(EN55022) ClassA EMS EN61000-4-2 (ESD), Level3 EN61000-4-3 (RS), Level3 EN61000-4-4 (EFT), Level3 EN61000-4-5 (Surge), Level3 EN61000-4-6 (CS), Level3 EN61000-4-8 EN61000-4-11 MTBF 401,000 hrs Warranty 5 years

Power Power Input PWR : 1/2 DC12-48 VDC Power Consumption < 4.8W Mechanical Dimension 106 x 62.5 x 134.8mm (DxWxH) Weight 460g Physical Characteristics Housing: Metal IP Protection IP30

Electrical Interface Connector: RJ45 Data rate: 10Mbps, 100Mbps Duplex mode: Half / Full duplex Cable 10Base-T Cat.3, 4, 5, UTP, 100Base-TX Cat.5, 5e or higher

1-1

Industrial Fiber Converter

Table of Contents


ApplicationsFast Ethernet LAN1 Fast Ethernet LAN1

1IndustrialIFC-1200 IFC IFC-1200 F

LAN2

Fast Ethernet

Fast Ethernet

LAN2

Dimensions64.9615.20

50.00

25.40

10.10

43.7053.8062.50

12.00

106.00

Side View

134.80

Front View

Rear View

DIN-rail Kit View

Ordering InformationProduct Type IFC-1200 IFC-1200-X Connector Type SC ST FC Connectivity Distance Wide Temperature Range

002:2km 015:15km 030:30km 050:50km 080:80km 120:120km

*20A: WDM 20km A type *20B: WDM 20km B type *40A: WDM 40km A type *40B: WDM 40km B type *60A: WDM 60km A type *60B: WDM 60km B type *80A: WDM 80km A type *80B: WDM 80km B type

X:-40~85C operating range*Standard model(IFC-1200)has 0 to 60C operating range

Optional Accessories DRK01: Din Rail mount kit (standardized 35 mm wide) WMK01:Wall mount kit Sample: IFC-1200-SC002 IFC-DRK01


184.30

Wall-Mount Kit View

1-2

Industrial Fiber ConverterIndustrial Fast Ethernet Media Converter

Table of Contents

IFC-1200-XThe IFC-1200-X is industrial grade fiber media converter that provides 2-port 10/100Base-TX and 1-port 100Base-FX. The reliable hardware t 10/100B TX d 1 t 100B FX Th design is suitable for keeping industrial automation application running continuously. Each IFC-1200-X media converter comes with two relay output alarms and two redundant DC power inputs to help prevent damage and loss. The IFC-1200-X media converter supports operating temperatures of -40 to 85 degree C.

Features 2-port 10/100Base-TX to 100Base-FX Converter Auto-Negotiation on two LAN port Auto MDI/MDIX Support max forwarding packet length 1552 bytes Supports Q in Q double tagged frame transparent Supports IEEE 802.1q Tag VLAN pass thru Support flow control (Pause) Supports Far End Fault Support two Relay out (Arc-Free Contact)

Industrial Grade Performance Power or Optical Fiber failure alarm by relay output Support DIN-Rail & wall mount -40 to 85C operating temperature range Redundant dual DC power inputs

SpecificationsOptical Interface Connector: 1x9 (SC,FC,ST) Data rate: 100Mbps Duplex mode: Full duplex Fiber MM 50/125m, 62.5/125m. SM 9/125m Distance MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km Wavelength MM 1310nm, SM 1310,1550nm WDM 1310Tx/1550Rx (type A) 1550Tx/1310Rx (type B) LED Indications PWR 1/2, FX-Link/Act, LAN1-Link/Act, LAN2-Link/Act, Alarm (Power or Optical FiberFailure Alarm)


Environmental Temperature Operating: -40 ~ 85C Storage: -40 ~ 85C Humidity 0 ~ 90% non-condensing Approvals Safety CSA C22.2 No.60950-1, EN60950-1 EMI FCC Part 15, CISPR(EN55022) ClassA EMS EN61000-4-2 (ESD), Level3 EN61000-4-3 (RS), Level3 EN61000-4-4 (EFT), Level3 EN61000-4-5 (Surge), Level3 EN61000-4-6 (CS), Level3 EN61000-4-8 EN61000-4-11 MTBF 401,000 hrs Warranty 5 years

Power Power Input PWR : 1/2 DC12-48 VDC Power Consumption: < 4.8W Mechanical Dimension 106 x 62.5 x 134.8mm (DxWxH) Weight 460g Physical Characteristics Housing: Metal IP Protection IP30


1-3


Table of Contents



1IndustrialIFC-1200-X X IFC IFC-1200-X F

LAN2

Fast Ethernet

Fast Ethernet

LAN2


50.00

25.40

10.10

43.7053.8062.50

12.00

106.00

Side View

134.80

Front View

Rear View

DIN-rail Kit View


002:2km 015:15km 030:30km 050:50km 080:80km 120:120km



Optional Accessories DRK01: Din Rail mount kit (standardized 35 mm wide) WMK01:Wall mount kit Sample: IFC-1200-X-SC002 IFC-DRK01


184.30

Wall-Mount Kit View

1-4

Industrial Ethernet SwitchIndustrial Fast Ethernet Switch

Table of Contents

IFC-1400The IFC-1400 is industrial grade Fast Ethernet Switch that provides 4-port 10/100Base-TX and 1-port 100Base-FX. The reliable hardware 10/100B TX d 1 t 100B FX Th design is suitable for keeping industrial automation application running continuously. Each IFC-1400 media converter comes with two relay output alarms and two redundant DC power inputs to help prevent damage and loss. The IFC-1400 media converter is available in models that support operating temperatures of 0 to 60 degree C.

Features 4-port 10/100Base-TX to 100Base-FX Switch Auto-Negotiation on two LAN port Auto MDI/MDIX Supports max forwarding packet length 1552 bytes Supports Q in Q double tagged frame transparent Supports IEEE 802.1q Tag VLAN pass thru Supports flow control (Pause) Supports Far End Fault Supports two Relay out (Arc-Free Contact)


SpecificationsOptical Interface Connector: 1x9 (SC,FC,ST) Data rate: 100Mbps Duplex mode: Full duplex Fiber MM 50/125m, 62.5/125m. SM 9/125m Distance MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km Wavelength MM 1310nm, SM 1310,1550nm WDM 1310Tx/1550Rx (type A) 1550Tx/1310Rx (type B) LED Indications PWR 1/2, FX-Link/Act, LAN1-Link/Act, LAN2-Link/Act, Alarm(Power or Optical Fiber Failure Alarm)


Environmental Temperature Operating: 0 ~ 60C Storage: -10 ~ 70C Humidity 0 ~ 90% non-condensing Approvals Safety CSA C22.2 No.60950-1, EN60950-1 EMI FCC Part 15, CISPR(EN55022) ClassA EMS EN61000-4-2 (ESD), Level3 EN61000-4-3 (RS), Level3 EN61000-4-4 (EFT), Level3 EN61000-4-5 (Surge), Level3 EN61000-4-6 (CS), Level3 EN61000-4-8 EN61000-4-11 MTBF 401,000 hrs Warranty 5 years

Power Power Input PWR : 1/2 DC12-48 VDC Power Consumption < 4.8W Mechanical Dimension 106 x 62.5 x 134.8mm (DxWxH) Weight 460g Physical Characteristics Housing: Metal IP Protection IP30


1-5

Industrial Ethernet Switch

Table of Contents



1IndustrialIFC-1400 0 IFC IFC-1400 F

LAN2

Fast Ethernet

Fast Ethernet

LAN2


50.00

25.40

10.10

43.7053.8062.50

12.00

106.00

Side View

134.80

Front View

Rear View

DIN-rail Kit View


002:2km 015:15km 030:30km 050:50km 080:80km 120:120km



Optional Accessories DRK01: Din Rail mount kit (standardized 35 mm wide) WMK01:Wall mount kit Sample: IFC-1400-SC002 IFC-DRK01


184.30

Wall-Mount Kit View

1-6

Industrial Ethernet SwitchIndustrial Fast Ethernet Switch

Table of Contents

IFC-1400-XThe IFC-1400-X is industrial grade Fast Ethernet Switch that provides 4-port 10/100Base-TX and 1-port 100Base-FX. The reliable hardware t 10/100B TX d 1 t 100B FX Th design is suitable for keeping industrial automation application running continuously. Each IFC-1400-X media converter comes with two relay output alarms and two redundant DC power inputs to help prevent damage and loss. The IFC-1400-X media converter is available in models that support operating temperatures of -40 to 85 degree C.

Features 4-port 10/100Base-TX to 100Base-FX Switch Auto-Negotiation on two LAN port Auto MDI/MDIX Supports max forwarding packet length 1552 bytes Supports Q in Q double tagged frame transparent Supports IEEE 802.1q Tag VLAN pass thru Supports flow control (Pause) Supports Far End Fault Supports two Relay out (Arc-Free Contact)

Industrial Grade Performance Power or Optical Fiber failure alarm by relay output Supports DIN-Rail & wall mount -40 to 85C operating temperature range Redundant dual DC power inputs

SpecificationsOptical Interface Connector: 1x9 (SC,FC,ST) Data rate: 100Mbps Duplex mode: Full duplex Fiber MM 50/125m, 62.5/125m. SM 9/125m Distance MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km Wavelength MM 1310nm, SM 1310,1550nm WDM 1310Tx/1550Rx (type A) 1550Tx/1310Rx (type B) LED Indications PWR 1/2, FX-Link/Act, LAN1-Link/Act, LAN2-Link/Act, Alarm (Power or Optical FiberFailure Alarm)


Environmental Temperature Operating: -40 ~ 85C Storage: -40 ~ 85C Humidity 0 ~ 90% non-condensing Approvals Safety CSA C22.2 No.60950-1, EN60950-1 EMI FCC Part 15, CISPR(EN55022) ClassA EMS EN61000-4-2 (ESD), Level3 EN61000-4-3 (RS), Level3 EN61000-4-4 (EFT), Level3 EN61000-4-5 (Surge), Level3 EN61000-4-6 (CS), Level3 EN61000-4-8 EN61000-4-11 MTBF 401,000 hrs Warranty 5 years

Power Power Input PWR : 1/2 DC12-48 VDC Power Consumption: < 4.8W Mechanical Dimension 106 x 62.5 x 134.8mm (DxWxH) Weight 460g Physical Characteristics Housing: Metal IP Protection IP30


1-7


Table of Contents



1IndustrialIFC-1400-X X IFC IFC-1400-X F

LAN2

Fast Ethernet

Fast Ethernet

LAN2


50.00

25.40

10.10

43.7053.8062.50

12.00

106.00

Side View

134.80

Front View

Rear View

DIN-rail Kit View


002:2km 015:15km 030:30km 050:50km 080:80km 120:120km



Optional Accessories DRK01: Din Rail mount kit (standardized 35 mm wide) WMK01:Wall mount kit Sample: IFC-1400-X-SC002 IFC-DRK01


184.30

Wall-Mount Kit View

1-8


Table of Contents

New

RS485/422/232 Fiber Converter

IFC-SerialThe IFC-Serial is industrial grade fiber media converter that provides a solution to extend asynchronous RS-485 or RS-232 transmission l ti t t d h RS 485 RS distance up to 2km over multimode fiber or up to 120km over single mode fiber. The converter is equipped with multiple interface circuits for connection to RS-232 or RS-485/422 (2 or 4 wire, full or half duplex). The IFC-Serial secures data transmission over EMI resistant fiber at speeds up to 460kbps for RS-232 or up to 1024kbps for RS-485/422. The IFC-Serial reliable industrial design is suitable for keeping your industrial automation applications running continuously. Each IFC-Serial media converter comes with two relay output alarms and two redundant DC power inputs to help prevent damage and loss. The IFC-Serial media converter is available in models that support operating temperatures of 0 to 60C.

Features Extend asynchronous serial transmission from 2km to 120km


over fiber Dip Switch selectable data interface for RS232/ 422/ 485 Dip Switch selectable two wires (half duplex) or four wires

(full duplex) RS485 Dip Switch selectable three or five wires RS232 Speeds up to 256kbps for RS232 (Async. mode) Speeds up to 1Mbps for RS485/422

SpecificationsOptical Interface Connector : 1x9 (SC, ST, FC) or SFP LC Data rate : 36.864Mbps LED Indications Power, FX Link, DI, DO, Test-10

Standard EIA/TIA RS485, RS422, RS232

Environmental Temperature Operating: 0 ~ 60C , Storage: -10 ~ 70C Humidity 10 ~ 90% non-condensing

Line coding : Scrambled NRZ Bit Error Rate : Less than 10 SM 9/125m Distance : MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km Wavelength : MM 1310nm, SM 1310, 1550nm, WDM 1310Tx/1550Rx(type A) 1550Tx/1310Rx(type B) Electrical Interface Connector: 6 pins Terminal block Data: Signal Formats RS485 2-wire RS422 4-wire RS232 RTS/CTS 5-wire RS232 3-wire Baud Rate : RS422, RS485 up to 1024kbps RS232 up to 256kbps Bit Error Rate: Less than 10-10 Cable type : MM 62.2/125m, 50/125m.

Power Power Input Standalone : AC, DC options Power Consumption < 5W

Approvals Safety CSA C22.2 No.60950-1, EN60950-1 EMI FCC Part 15, CISPR(EN55022) ClassA EMS EN61000-4-2 (ESD), Level3 EN61000-4-3 (RS), Level3 EN61000-4-4 (EFT), Level3 EN61000-4-5 (Surge), Level3 EN61000-4-6 (CS), Level3 EN61000-4-8 EN61000-4-11 MTBF 401,000 hrs Warranty 5 years

Mechanical Dimension 155 x 88 x 23mm (D x W x H) Weight 460g Physical Characteristics Housing: Metal IP Protection IP30

1-9


Table of Contents


1IndustrialApplicationsRS485 Twisted pair

R RS-485 network on one twisted pair / 2-wire half duplex 2

HOST

IFC-Serial

IFC-Serial Slot machine 1.32


50.00

25.40

10.10

43.7053.8062.50

12.00

106.00

Side View

134.80

Front View

Rear View

DIN-rail Kit View

Ordering InformationProduct Type IFC-Serial IFC-Serial-X Connector Type SC ST FC Connectivity Distance Wide Temperature Range

002:2km 015:15km 030:30km 050:50km 080:80km 120:120km


X:-40~85C operating range*Standard model (IFC-Serial)has 0 to 60C operating range

Optional Accessories DRK01: Din Rail mount kit (standardized 35 mm wide) WMK01:Wall mount kit Sample: IFC-Serial-SC002 IFC-DRK01


184.30

Wall-Mount Kit View

1-10


Table of Contents

New

RS485/422/232 Fiber Converter

IFC-Serial-XThe IFC-Serial-X is industrial grade fiber media converter that provides a solution to extend asynchronous RS-485 or RS-232 transmission l ti t t d h RS 485 RS distance up to 2km over multimode fiber or up to 120km over single mode fiber. The converter is equipped with multiple interface circuits for connection to RS-232 or RS-485/422 (2 or 4 wire, full or half duplex). The IFC-Serial-X secures data transmission over EMI resistant fiber at speeds up to 460kbps for RS-232 or up to 1024kbps for RS-485/422. The IFC-Serial reliable industrial design is suitable for keeping your industrial automation applications running continuously. Each IFC-Serial media converter comes with two relay output alarms and two redundant DC power inputs to help prevent damage and loss. The IFC-Serial-X media converter is available in models that support operating temperatures of -40 to 85C.


Industrial Grade Performance Power or Optical Fiber failure alarm by relay output Support DIN-Rail & wall mount -40 to 85C operating temperature range Redundant dual DC power inputs

over fiber Dip switch selectable data interface for RS232/ 422/ 485 Dip switch selectable two wires (half duplex) or four wires

(full duplex) RS485 Dip switch selectable three or five wires RS232 Speeds up to 256kbps for RS232 (Async. mode) Speeds up to 1Mbps for RS485/422

SpecificationsOptical Interface Connector : 1x9 (SC, ST, FC) or SFP LC Data rate : 36.864Mbps-10

Standard EIA/TIA RS485, RS422, RS232 Certification CE, FCC, LVD, RoHS LED Indications Power, FX Link, DI, DO, Test

Environmental Temperature Operating: -40 ~ 85C , Storage: -40 ~ 85C Humidity 10 ~ 90% non-condensing Approvals Safety CSA C22.2 No.60950-1, EN60950-1 EMI FCC Part 15, CISPR(EN55022) ClassA EMS EN61000-4-2 (ESD), Level3 EN61000-4-3 (RS), Level3 EN61000-4-4 (EFT), Level3 EN61000-4-5 (Surge), Level3 EN61000-4-6 (CS), Level3 EN61000-4-8 EN61000-4-11 MTBF 401,000 hrs Warranty 5 years

Line coding : Scrambled NRZ Bit Error Rate : Less than 10 SM 9/125m Distance : MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km Wavelength : MM 1310nm, SM 1310, 1550nm, WDM 1310Tx/1550Rx(type A) 1550Tx/1310Rx(type B) Electrical Interface Connector: 6 pins Terminal block Data: Signal Formats RS485 2-wire RS422 4-wire RS232 RTS/CTS 5-wire RS232 3-wire Baud Rate : RS422, RS485 up to 1024kbps RS232 up to 256kbps Bit Error Rate: Less than 10-10 Cable type : MM 62.2/125m, 50/125m.

Power Power Input Standalone : AC, DC options Power Consumption < 5W Mechanical Dimension 155 x 88 x 23mm (D x W x H) Weight 460g Physical Characteristics Housing: Metal IP Protection IP30

1-11


Table of Contents


1IndustrialApplicationsRS485 Twisted pair

R RS-485 network on one twisted pair / 2-wire half duplex 2

HOST

IFC S i l X IFC-Serial-X

IFC-Serial-X FC S i l X Slot machine 1.32


50.00

25.40

10.10

43.7053.8062.50

12.00

106.00

Side View

134.80

Front View

Rear View

DIN-rail Kit View

Ordering InformationProduct Type IFC-Serial IFC-Serial-X Connector Type SC ST FC Connectivity Distance Wide Temperature Range

002:2km 015:15km 030:30km 050:50km 080:80km 120:120km


X:-40~85C operating range*Standard model (IFC-Serial)has 0 to 60C operating range

Optional Accessories DRK01: Din Rail mount kit (standardized 35 mm wide) WMK01:Wall mount kit Sample: IFC-Serial-X-SC002 IFC-DRK01


184.30

Wall-Mount Kit View

1-12


Table of Contents

New

RS485/232 Daisy Chain Fiber Converter

IFC-Serial/FDCThe IFC-Serial/FDC is industrial grade fiber media converter that provides a dual fiber connection converter solution to extend id d l fib ti t l asynchronous RS-485 or RS-232 transmission distance up to 2km over multimode fiber or up to 120km over single mode fiber. The dual fiber inputs allow connecting multiple devices in a cascade or "daisy chain" fashion as well as creating ring architecture for fiber redundancy. The converter is equipped with multiple interface circuits for connection to RS-232 or RS-485/422 (2 or 4 wire, full or half duplex). The IFC-Serial/FDC secures data transmission over EMI resistant fiber at speeds up to 256kbps for RS-232 or up to 1024kbps for RS-485/422. The IFC-Serial/FDC reliable industrial design is suitable for keeping your industrial automation applications running continuously. Each IFC-Serial/FDC media converter comes with two relay output alarms and two redundant DC power inputs to help prevent damage and loss. The IFC-Serial/FDC media converter is available in models that support operating temperatures of 0 to 60C.


Dip switch selectable three or five wires RS232 Speeds up to 256kbps for RS232 (Async. mode) Speeds up to 1Mbps for RS485/422

over fiber Two fiber ports support daisy chain and ring architecture Multi-drop operation over fiber ring Dip switch selectable data interface for RS232/ 422/ 485 Dip switch selectable two wires (half duplex) or four wires


(full duplex) RS485

SpecificationsOptical Interface Connector : SFP LC Data rate : 31.104Mbps LED Indications Power, FX-Link1, FX-Link2, Test, Master, Ring TD, RD Power Power Input AC adapter: 100~240VAC to 12VDC AC 100~240V, DC -18~75V Electrical Interface Connector: 6 pins Terminal block Data: Signal Formats RS485/422 2-wire , 4-wire RS232 RTS/CTS 5-wire, 3-wire RS423 RTS/CTS 5-wire, 3-wire TTL 3-wire Baud Rate : RS422, RS485 up to 1024kbps RS232 up to 256kbps TTL up to 1024kbps Mechanical Dimension DC12 : 160x88x24mm(DxWxH) AC/DC48/AD: 201x135x35mm(DxWxH) Physical Characteristics Housing: Metal IP Protection IP30 Power Consumption < 5W-11


Environmental Temperature Operating: 0 ~ 60C , Storage: -10 ~ 70C Humidity 0 ~ 90% non-condensing Approvals Safety CSA C22.2 No.60950-1, EN60950-1 EMI FCC Part 15, CISPR(EN55022) ClassA EMS EN61000-4-2 (ESD), Level3 EN61000-4-3 (RS), Level3 EN61000-4-4 (EFT), Level3 EN61000-4-5 (Surge), Level3 EN61000-4-6 (CS), Level3 EN61000-4-8 EN61000-4-11 MTBF 401,000 hrs Warranty 5 years

Line coding : Scrambled NRZ Bit Error Rate : Less than 10 SM 9/125m Distance : MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km Wavelength : 1310nm, 1550nm Cable type : MM 62.2/125m, 50/125m.

1-13


Table of Contents


ApplicationsControl Center PLC RS485 RS485/232 Management PC( (Sl (Slave Mode) M d )

1Industrial IndustrialPLC RS485 RS485/232 IFC IFC-Serial/FDC(Sla (Slave Mode)

2 RS485/232 PLC RS485/232

IFC IFC-Serial/FDC( (Mas (Master Mode)(Slave Mode) de) e

RS48 RS485/232

PLC

(Slave Mode)

(Slave Mode) lave v e

RS485/232 RS485 PLC

RS485 RS485/232 PLC


50.00

25.40

10.10

43.7053.8062.50

12.00

106.00

Side View

134.80

Front View

Rear View

DIN-rail Kit View

Ordering InformationProduct Type IFC-Serial/FDC Connector Type SC Connectivity Distance Wide Temperature Range

IFC-Serial/FDC-X ST FC

002:2km 015:15km 030:30km 050:50km 080:80km 120:120km


X:-40~85C operating range*Standard model (IFC-Serial/FDC)has 0 to 60C operating range

Optional Accessories DRK01: Din Rail mount kit (standardized 35 mm wide) WMK01:Wall mount kit Sample: IFC-Serial/FDC-SC002 IFC-DRK01


184.30

Wall-Mount Kit View

1-14


Table of Contents

New

RS485/232 Daisy Chain Fiber Converter

IFC-Serial/FDC-XThe IFC-Serial/FDC-X is industrial grade fiber media converter that provides a dual fiber connection converter solution to extend id d l fib ti t asynchronous RS-485 or RS-232 transmission distance up to 2km over multimode fiber or up to 120km over single mode fiber. The dual fiber inputs allow connecting multiple devices in a cascade or "daisy chain" fashion as well as creating ring architecture for fiber redundancy. The converter is equipped with multiple interface circuits for connection to RS-232 or RS-485/422 (2 or 4 wire, full or half duplex). The IFC-Serial/FDC-X secures data transmission over EMI resistant fiber at speeds up to 256kbps for RS-232 or up to 1024kbps for RS-485/422. The IFC-Serial/FDC-X reliable industrial design is suitable for keeping your industrial automation applications running continuously. Each IFC-Serial/FDC-X media converter comes with two relay output alarms and two redundant DC power inputs to help prevent damage and loss. The IFC-Serial/FDC-X media converter is available in models that support operating temperatures of -40 to 85C.


Dip switch selectable three or five wires RS232 Speeds up to 256kbps for RS232 (Async. mode) Speeds up to 1Mbps for RS485/422

over fiber Two fiber ports support daisy chain and ring architecture Multi-drop operation over fiber ring Dip switch selectable data interface for RS232/ 422/ 485 Dip switch selectable two wires (half duplex) or four wires

Industrial Grade Performance Power or Optical Fiber failure alarm by relay output Supports DIN-Rail & wall mount -40 to 85C operating temperature Redundant dual DC power inputs

(full duplex) RS485

SpecificationsOptical Interface Connector : SFP LC Data rate : 31.104Mbps LED Indications Power, FX-Link1, FX-Link2, Test, Master, Ring TD, RD Power Power Input AC adapter: 100~240VAC to 12VDC AC 100~240V, DC -18~75V Power Consumption < 5W Electrical Interface Connector: 6 pins Terminal block Data: Signal Formats RS485/422 2-wire , 4-wire RS232 RTS/CTS 5-wire, 3-wire RS423 RTS/CTS 5-wire, 3-wire TTL 3-were Baud Rate : RS422, RS485 up to 1024kbps RS232 up to 256kbps TTL up to 1024kbps Mechanical Dimension DC12 : 160x88x24mm(DxWxH) AC/DC48/AD: 201x135x35mm(DxWxH) Weight 460g Physical Characteristics Housing: Metal IP Protection IP30-11


Environmental Temperature Operating: -40 ~ 85C , Storage: -40 ~ 85C Humidity 0 ~ 90% non-condensing Approvals Safety CSA C22.2 No.60950-1, EN60950-1 EMI FCC Part 15, CISPR(EN55022) ClassA EMS EN61000-4-2 (ESD), Level3 EN61000-4-3 (RS), Level3 EN61000-4-4 (EFT), Level3 EN61000-4-5 (Surge), Level3 EN61000-4-6 (CS), Level3 EN61000-4-8 EN61000-4-11 MTBF 401,000 hrs Warranty 5 years

Line coding : Scrambled NRZ Bit Error Rate : Less than 10 SM 9/125m Distance : MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km Wavelength : 1310nm, 1550nm Cable type : MM 62.2/125m, 5/125m.

1-15


Table of Contents


Applications

1IndustrialPLC RS485/ RS485/232 Management PC( v (Slave (Slave Mode) e

Control Center

PLC RS485/232 IFC IFC-Serial/FDC-X(Slav (Slave Mode)

RS485/232 PLC RS485/232

IFC IFC-Serial/FDC-X( (Mas (Master Mode)(Slave Mode) de) e

RS4 RS485/232

PLC

(Slave Mode)

(Slave Mode) Slave v e

RS485/232 RS485 PLC

RS48 RS485/232 PLC


50.00

25.40

10.10

43.7053.8062.50

12.00

106.00

Side View

134.80

Front View

Rear View

DIN-rail Kit View

Ordering InformationProduct Type IFC-Serial/FDC Connector Type SC Connectivity Distance Wide Temperature Range

IFC-Serial/FDC-X ST FC

002:2km 015:15km 030:30km 050:50km 080:80km 120:120km


X:-40~85C operating range*Standard model (IFC-Serial/FDC)has 0 to 60C operating range

Optional Accessories DRK01: Din Rail mount kit (standardized 35 mm wide) WMK01:Wall mount kit Sample: IFC-Serial/FDC-X-SC002 IFC-DRK01


184.30

Wall-Mount Kit View

1-16

Terminal Server

Table of Contents

Single Port IP to Serial Device Server

STE100A/RS232The IP Serial Server provides the serial device server for Windows hosts to control serial devices located virtually anywhere through a TCP/IP or UDP/IP connection. The IP Serial Server has the asynchronous serial port connection on one side, and a 10/100 Mbps Ethernet connection on the other side. It connects devices, such as CNC, weight scales, and scanners. Applications include industrial/factory automation, automatic warehouse control, and hospital/laboratory automation. The IP Serial Server Windows driver is designed to control the IP Serial Server devices. The driver installs a virtual COM on Windows which maps the virtual COM port to the IP address of the IP Serial Server device across the network, enabling the Windows applications to access remote serial devices over Ethernet. IP Serial Server can function as a UDP or a server or client for TCP connection. The application scenarios are direct IP mode, virtual COM mode, and paired mode. When in the paired mode one IP Serial Server must set as a client and the other must set as a server in TCP connection.

Features 10/100Mbps Ethernet port 230.4kbps serial interface TCP Server, TCP client, Virtual com mode, UDP Supports for DHCP, HTTP, ICMP, ARP, IP, UDP, TCP Easy to use with Windows utility Configuration by web browser Compack size 53x85x21(mm) Low power consumption with single + 12V to +48V input

SpecificationsGeneral LED: Ready, TP Link/Act, RS232 Tx/Rx Push button for Load Default Configuration OS supported: Windows XP/2000/2003/2008/VISTA/WIN7 Serial Interface RS-232 Serial Connector DB-9 male Baudrate 110 to 230.4Kbps Data bits 5, 6, 7, 8 Stop bits 1, 1,5 for Data bits 5 mode; 1, 2 for data bits 6, 7, 8 mode Parity None, Even, Odd Flow Control None, RTS/CTS Data Packing Delimiter 1,2 LAN Interface RJ-45 connector, IEEE802.3 10/100BaseT, Auto-detecting, Full/Half-duplex Communication Modes TCP Server, TCP Client, Virtual COM mode, UDP Protocols TCP, UDP, IP, ARP, ICMP, HTTP, DHCP, ICMP Client requests connection at Power up TCP Inactivity Time (TCP alive time) Management Web pages, Firmware upgrade Security Password Access Power AC Adapter, 12VDC output Operating Temperature 0 to 60 C Storage Temperature -10 to 70 C Humidity 0 90% non-condensing DIN rail mount Yes Panel mount Yes Dimensions 53 x 85 x 21mm(WxDxH) Certifications CE, FCC

STE-100A/RS232 RS-232 10/100Base-T Ethernet UDP, TCP Server STE-100A/RS232 RS-232 Telnet Server STE-100A/RS232

STE-100A/RS232 RS-232 UDP, TCP Client

10/100Base-T Ethernet Telnet Client

RS-232 Telnet Client

10/100Base-T Ethernet Telnet Server

Ordering InformationSTE100A/RS232 Single port IP to Serial/RS-232 Device Server

1-17

Terminal Server

Table of Contents

New

Terminal ServerSingle Port IP to Serial Device Server

1Industrial

STE100A/RS485The IP Serial Server provides the serial device server for Windows hosts to control serial devices located virtually anywhere through a TCP/IP or UDP/IP connection. The IP Serial Server has the asynchronous serial port connection on one side, and a 10/100 Mbps Ethernet connection on the other side. It connects devices, such as CNC, weight scales, and scanners. Applications include industrial/factory automation, automatic warehouse control, and hospital/laboratory automation. The IP Serial Server Windows driver is designed to control the IP Serial Server devices. The driver installs a virtual COM on Windows which maps the virtual COM port to the IP address of the IP Serial Server device across the network, enabling the Windows applications to access remote serial devices over Ethernet. IP Serial Server can function as a UDP or a server or client for TCP connection. The application scenarios are direct IP mode, virtual COM mode, and paired mode. When in the paired mode one IP Serial Server must set as a client and the other must set as a server in TCP connection.

Features 10/100Mbps Ethernet port 230.4kbps serial interface TCP Server, TCP client, Virtual com mode, UDP Support for DHCP, HTTP, ICMP, ARP, IP, UDP, TCP Easy to use with Windows utility 2 Wire(half duplex) or 4 Wire(full duplex)RS-485 Configuration by web browser Compack size 53x85x21(mm) Low power consumption with single + 12V to +48V input

SpecificationsGeneral LED: Ready, TP Link/Act, Data Tx/Rx Push button for Load Default Configuration OS supported: Windows XP/2000/2003/2008/VISTA/WIN7 Serial Interface RS-485, RS-422 (2 or 4 Wire RS-485; 4 Wire RS-422) Serial Connector Terminal Block Baudrate 110 to 230.4Kbps Data bits 5, 6, 7, 8 Stop bits 1, 1,5 for Data bits 5 mode; 1, 2 for data bits 6, 7, 8 mode Parity None, Even, Odd Flow Control Full/ Half Duplex Data Packing Delimiter 1,2 LAN Interface RJ-45 connector, IEEE802.3 10/100BaseT, Auto-detecting, Full/Half-duplex Communication Modes TCP Server, TCP Client, Virtual COM mode, UDP Protocols TCP, UDP, IP, ARP, ICMP, HTTP, DHCP, ICMP Client requests connection at Power up TCP Inactivity Time (TCP alive time) Management Web pages, Firmware upgrade Security Password Access Power AC Adapter, 12VDC output Operating Temperature 0 to 60 C Storage Temperature -10 to 70 C Humidity 0 90% non-condensing DIN rail mount Yes Panel mount Yes Dimensions 53 x 85 x 21mm(WxDxH) Certifications CE, FCC

STE-100A/RS485

STE-100A/RS485

RS485/422

10/100Base-T Ethernet UDP, TCP Server UDP, TCP Client

RS485/422

Remote Host ote

Local Host

Internet

Ethernet 192.168.1.1 S STE-100A/RS485

RS-485 2 or 4 Wire

Slot machine 1

.32

Ordering InformationSTE100A/RS485 Single port IP to Serial/RS-485 Device Server


1-18

2

Fiber Series

Ethernet Demarcation

Ethernet over SDHCWDM

10GTransponderIntegrated

Access Device

Ethernet over FiberEPON

2U Managed Platform - FRM220

Table of Contents

In-band Managed Multi-service Platform

FRM220The FRM220 is a 2U high 19" Rack, 20 slot modular media converter rack. It provides an economic solution in high density fiber converter installations in enterprises or central offices. All critical components, Power, fans, management module and interface cards are hot swappable, allowing online field replacement. The

SpecificationsConnectorsConsole RS232(DB9) LAN 10/100 Base TX RJ45

Physical SpecificationsDimensions: 303mm x 438mm x 88mm (W x D x H) Weight: 5.2kg w/o P/S AC : 100 ~ 240VAC DC24 : 18 ~ 36VDC, DC48: 36 ~ 75VDC

Power Characteristics Environmental SpecificationsOperating 0C ~ 60C Storage -10C ~ 70C Relative humidity 5% ~ 90% non-condensing Predicted MTBF : 65,000 hrs

hot-swappable power modules can be chosen from AC100-240V, DC18-36. or DC 36-75V. The chassis also has a pair of alarm relays and is able to stack up to 10 chassis as one management IP address. A number of cards are available that support different protocols including Ethernet, Voice, Data, transponders, FOM and IMUX.

Certification

FCC class A, VCCI class A, CE, RoHS

Technology support 10G, 2.7G 3R Transponder

2U High 19 20-slot modular media converter Chassis overview

Gigabit Ethernet Converter Fast Ethernet Converter Fiber Multiplexer POTS Fiber Converter Fiber Repeater E1/T1 Fiber Modem V35/X21/RS530 Fiber Modem Serial RS485/422 Fiber Converter CWDM Mux/DeMUX E1/T1 Cross Rate Converter Gigabit Ethernet Switch

Chassis backplane consists of passive components SNMP Card

Thermal fan Holes

Chassis cascade up to 10 with one IP management Alarm relay

Hot swappable Thermal fans

Single or optional redundant power supplies

Ordering Information

FRM220 Chassis FRM220-CH20 : 2U 19 20 slot chassis FRM220-AC : 100 ~ 240 AC power card FRM220-DC24 : 18 ~ 36 DC power card FRM220-DC48 : 36 ~ 72 DC power card

Smart View Element Management System(EMS) Device Agents SV-AGT-50: 50 Device agents SV-AGT-100: 100 Device agents SV-AGT-200: 200 Device agents SV-AGT-500: 500 Device agents Example: SV-PLF-05, SV-AGT-50, SV-Fiber Platform server SV-PLF-05: 5 Client user admission SV-PLF-25: 25 Client user admission SV-PLF-50: 50 Client user admission Managed Modules SV-Fiber: FRM220

2-1

FRM220

w w w. c tc u. co m

Table of Contents

2U Managed Platform - FRM220

Slide-in card overviewEthernet over FiberFast Ethernet 1.In-Band Managed FE MC 2.OAM/IP FE Switch FRM220-10/100A Gigabit Ethernet 1.GbE OAM/IP MC 2.Managed GbE MC 3.GbE OAM/IP Switch FRM220-1000EAS FRM220-1000EAS/X Fiber Optical Multiplexer FOM04

Transponder/ Repeater2.7G 3R Transponder 10G 3R Transponder FRM220-10G FRM220-2.7G 155Mbps Transponder FRM220-155MS

Mux/Demux4ch CWDM Mux/Demux 8ch CWDM Mux/Demux FRM220-MD40 FRM220-MD80

2

Fiber Series

Fiber Multiplexer

POTS over FiberFXO/FXS FRM220-FXO/FXS

V.35 Datacom/ RS485 over FiberV.35 / X.21 /RS530 Fiber Modem FRM220-Data RS485 / RS422 / RS232 Fiber Modem FRM220-Serial

PDH over FiberE1/T1 Fiber Modem FRM220-E1/T1

Ethernet over PDH5E1, 8E1, 16E1 Inverse Multiplexer FRM220-ET100

E1/T1 Cross Rate ConverterE1 To Data converter E1 To T1 Converter FRM220-FTEC

Chassis cascade

Power RedundancyAll the FRM220 chassis power supplies are hot swappable and modular, installing two into a chassis provides redundancy should a single power supply fail. A fully loaded chassis can run continuously with only one power module fitted into the chassis.

Master

Cooling FanTo further increase system reliability, the FRM220 chassis is fitted with two hot swappable fan modules. Both fan modules can be easily removed from the rear of the chassis, without interruption to the operation of the line cards. A fully loaded chassis can run continuously with only one fan module fitted into the chassis.

Slave 1

UTP cable

Chassis cascadeThe FRM220 features cascadeable management which allows managing a stack (up to 10 chassis) from a single IP address. Chassis are interconnected with standard UTP cables that carry control signals. Each chassis has its own ID, starting with the master chassis ID0 and cascading up to ID9.Slave 9 10 chassis cascade with one IP management

Ordering InformationNetwork ManagementThe FRM220 chassis provides an NMC (Network Management Controller) card which must be installed into the first slot of chassis. The NMC card allows a network administrator with the ability to configure and monitor the status of the blades. Management can be achieved locally over RS232, or over the network by Telnet, Web or SNMP If the blades support Ethernet in the First Mile (IEEE 802.3ah), then the management module can also configure and monitor the status of a remote blade. FRM220 Slide-in cardFRM220-NMC FRM220-1000EAS FRM220-1000EAS/X FRM220-1000EAS-1 FRM220-1000E(S)-1 FRM220-1000TS FRM220-10/100A FRM220-10/100AS-2 FRM220-10/100i FRM220-10/100iS-2 FRM220-10/100i-2E FRM220-FXO/FXS FRM220-Data FRM220-Serial FRM220-E1/T1 FRM220-ET100 FRM220-FOM04 FRM220-FTEC FRM220-E1/Data FRM220-10G FRM220-2.7G-2S FRM220-2.7G-3S FRM220-TR21 FRM220-155MS FRM220-MD40/80 :Network Management Controller :2-port 10/100/1000T + 2-port 1000X OAM/IP Switch :2-port 10/100/1000T + 2-port 1000X GE Switch :10/100/1000T to 1000X OAM/IP MC :10/100/1000T to 1000X MC :1000T to 1000X MC :2-port 10/100TX to 100FX OAM/IP MC :2-port 10/100TX + 2-port 100FX OAM/IP Switch :10/100TX to 100FX with In-band management :Dual channels 10/100TX to 100FX with In-band management :2-port 10/100T to 100X In-band Management MC :POTS over fiber FXO/FXS 2-wire MC :V35/ X21/ RS530/ RS449/ RS232 Fiber modem :RS485/422/232 Fiber Converter :E1/T1 Fiber modem :Ethernet over E1 Fiber modem :4-port E1/T1+100M Ethernet Fiber Multiplexer :E1/T1 Cross Rate Converter :V35/ X21/ RS530/ RS449/ RS232 to fractional E1 :10G 3R Transponder :2.7G 3R Transponder :2.7G 3R Transponder with Optical Fiber Protection :2R 2.5G Transponder :155Mbps Fiber Repeater :4ch/8ch Mux/DeMUX

Protocol SupportedThe FRM220 chassis has been designed as a Multi-serivce platform. This allows network administrators to deploy the chassis in a wide range of networks. Technologies supported by the chassis included Fast/Gigabit Ethernet, E1/T1, V35/X21/RS530, Serial RS485/422, Voice FXO/FXS, Repeater, Fiber Multiplexer, E1 Inverse Multiplexer and 10G, 2.7G Transponder.

www. c tcu. co m

FRM220

2-2

Slide-in card Chassis - FRM220

Table of Contents

FRM220 Stand-alone Chassis OverviewThe FRM220 Chassis Product line includes various metal chassis sizes, which can hold from one to twenty FRM220 slide-in modules. The FRM220-CH01 is one slot chassis, which can be installed with one single width blade card for stand-alone applications. The available power options are external AC adapter, built-in AC, DC power or built-in AC+DC, AC+AC, DC+DC dual power. The FRM220-CH01M is one slot chassis with DB9 console port for local management, which can be installed with one single width blade card for stand-alone applications. The available power options are built-in AC, DC or built-in AC+DC dual power.The FRM220-CH02 is a two slot chassis, which can be installed with one double width blade card for stand-alone applications. The only available power supply option is an external AC adapter. The FRM220-CH02M is a two slot chassis with DB9 console port for local management, which can be installed with either one or two single width blade cards or one double width blade card. The available power supplies are built-in AC, DC or AC+DC dual power.The FRM220-CH02/NMC is a two slot chassis and the FRM220-CH04/NMC is a four slot chassis. Both chassis can be SNMP managed when installing one FRM220-NMC card for Web, Telnet, Console and SNMP management. The FRM220-CH02/NMC and FRM220-CH04/NMC can be installed with either one or two single width blade cards or one double width blade card. The FRM220-CH02/NMC available power options are built-in AC, DC or AC+DC dual power. The FRM220-CH04/NMC is only available with external AC adapter.

FRM220 One Slot Chassis FRM220- CH01Features One slot chassis for FRM220 Single width blade line cards. Available in six types: external power adapter or power built-in AC, DC, AC+DC, AC+AC or DC+DC. Fanless Dimensions external adapter: 160 x 88 x 24mm (D x W x H) internal power: 180 x 135 x 35mm (D x W x H)

Ordering Information ormationLine card model Power type

Power Input External adapter: Input voltage 100 ~ 240VAC 50/60Hz Output voltage 12VDC 1A AC power DC power 100 ~ 240VAC 24VDC, 48VDC, 72VDC

FRM220Example:

-CH01DC12 : AC adapter AC : AC power DC : DC power AD : AC+DC power AA : AC+AC power DD : DC+DC power

FRM220-10/100i-CH01-AC

FRM220 One Slot Chassis with Console port FRM220-CH01MFeatures One slot chassis for FRM220 Single width blade line cards.(include: E1/T1, Data, 10/100i, iMax5/ 8/ 16,Eoe1, E1/Data)

Supports DB9 console port for Local management Available in three types: power built-in AC, DC, AC+DC. Fanless Dimensions : 201 x 135 x 35mm (D x W x H)

Ordering InformationLine card model

Power InputAC power DC power 100 ~ 240VAC 24VDC, 48VDC, 72VDC

Power type

FRM220Example:

-CH01MAC : AC power DC :DC power AD : AC+DC power

FRM220-10/100i -CH01M-AC

2-3

FRM220 Slide-in Card Chassis

w w w. c tc u. co m

Table of Contents

Slide-in card Chassis - FRM220FRM220 Two Slot Chassis FRM220-CH02Features Two slot chassis for FRM220 line cards. (include: FOM04, iMUX16, MD50/80) Supports one double width blade card. Power type: external power adapter Fanless

2Fiber Series

Ordering InformationFRM220-CH02Power type

Dimensions : 139 x 88 x 44mm (D x W x H)

Power InputPower adapter : Input voltage 100 ~ 240VAC 50/60Hz, Output voltage 12VDC 1A

DC12 : chassis for one AC adapter Example: FRM220-CH02-DC12

FRM220 Two Slot Chassis with Console port FRM220-CH02MFeatures Two slot chassis for FRM220 line cards. (include: 10G, 2.7G, iMUX16, FOM04) Supports backplane connection between two slots Supports DB9 console port for local management

Ordering InformationFRM220-CH02MPower type

Supports either one or two single width blades or one double width blade. Available in three types: built-in AC, DC, AC+DC. Cooling Fan Dimensions : 220 x 168 x 45mm (D x W x H)

AC : AC power DC : DC power AD : AC+DC power Example: FRM220-CH02M-AC

Power Input

AC power: 100 ~ 240VAC, DC power: 24VDC, 48VDC, 72VDC

FRM220 SNMP manageable Two Slot Chassis FRM220-CH02 / NMCFeatures Two slot chassis for FRM220 line cards Supports backplane connection between two slots Telnet, Web, Console, SNMP manageable via NMC card

Ordering InformationFRM220-CH02/NMCPower type

Supports either one or two single width blades or one double width blade. Available in three types: built-in AC, DC, AC+DC. Cooling Fan Dimension : 220 x 168 x 45mm (D x W x H)

AC : AC power DC :DC power AD : AC+DC power Example: FRM220-CH02/NMC-AC

Power Input

AC power: 100 ~ 240VAC, DC power: 24VDC, 48VDC, 72VDC

FRM220 SNMP manageable Four Slot Chassis FRM220-CH04 / NMCFeatures Four slot chassis for FRM220 line cards Supports backplane connection between four slots Telnet, Web, Console, SNMP manageable via NMC card Supports one to four single width blades or two double width blades. Available with external power only Fanless Dimension : 162 x 87 x 88mm (D x W x H)

Power Input

Ordering InformationFRM220-CH04/NMC-DC12: 4 Slot Chassis with external adapter

Power adapter: Input voltage: 100 ~ 240VAC 50/60Hz, Output voltage: 12VDC 2A

www. c tcu. co m

FRM220 Slide-in Card Chassis

2-4

Management - FRM220

Table of Contents

Network Management Controller

FRM220-NMCThe FRM220-NMC is a Network Management Controller card that can be placed in a compatible FRM220 series chassis to provide network management functions. The management interface supports a local RS-232 serial console or remote TCP/IP management by Telnet, HTTP or SNMP protocols. The card is designed to be hot swapped so that it may be field replaced without affecting any online service of any other rack cards. The card also supports online firmware upgrade from TFTP server, using any user interface.Support for any standard NMS is provided by the included enterprise MIB file.Management Interface In-band management: provide all system OAM/IP functions: software updates, and management system interaction through Ethernet port. Out-band management: supports Web, Telnet and SNMP , EMS management Electrical Interface Console RS232 port LAN 10/100Base-TX

CTC Union also provides and maintains their own EMS (Element Management System) which is a Java based client/server manager for monitoring and maintaining a large number of network elements over a long period of time.

Features Supports local / remote monitor and configuration Supports local / remote online TFTP f/w upgrade Fiber transceiver status & info display Supports multiple accesses for SNMP management Supports Web GUI management, Telnet, Serial console Supports console RS-232 port and 10/100Base-T Ethernet port Supports SNMP standard MIB II and enterprise MIB Supports NTP time synchronization Supports 100 entries system log

OAM/IP

Configuration Management Performance Management Fault Management Status Monitoring.

Indications Dimensions Weight Temperature Humidity Certification MTBF

PWR, Fan, Alarm Act, STK, LAN LNK/SPD 155 x 88 x 23mm (DxWxH) 120g 0 ~ 60C (Operating) , -10 ~ 70C (Storage) 10 ~90% non-condensing CE, FCC, LVD, RoHS 65,000 hrs (25C)

Serial Console Management**************************************** *** CTC UNION TECHNOLOGIES CO., LTD. *** *** FRM220 NMC VER. 1.95 *** **************************************** This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00] Chassis List:[Master] #0:[X] #1:[ ] #2:[ ] #3:[ ] #4:[ ] #5:[ ] #6:[ ] #7:[ ] #8:[ ] #9:[ ] :SLOT #01 > NMC & Chassis :SLOT #11 > FRM220-SERIAL :SLOT #02 > FRM220-10/100I :SLOT #12 > FRM220-1000EDS :SLOT #03 > FRM220-10/100I :SLOT #13 > FRM220-1000EAS :SLOT #04 > FRM220-10/100I :SLOT #14 > FRM220-155MS :SLOT #05 > FRM220-10/100I :SLOT #15 > FRM220-155MS :SLOT #06 > FRM220-10/100I :SLOT #16 > FRM220-1000EAS :SLOT #07 > FRM220-10/100I :SLOT #17 > FRM220-E1/T1 :SLOT #08 > FRM220-10/100I :SLOT #18 > FRM220-1000EAS-1 :SLOT #09 > FRM220-10/100A :SLOT #19 > FRM220-FXO/FXS :SLOT #10 > FRM220-DATAPORT :SLOT #20 > FRM220-FXO/FXS :Monitor Previous Chassis :Monitor Next Chassis :SNMP System Configuration Setup :SNMP Manager Configuration Setup :Password Setup :Reboot :Logout Please select an itemWeb GUI ManagerOrdering InformationFRM220-NMC: Network Management Controller2-5FRM220-NMCw w w. c tc u. co mTable of ContentsManagement - FRM220FRM220-NMC Management ApplicationNMC Management ApplicationWhen a standalone unit with Dip switch for setting connects by fiber to CH20 or CH02/NMC chassis with NMC management card:When the standalone is powered on, the operation first follows the configuration set by Dip Switch setting. After the NMC card starts polling the standalone unit, the Dip switch settings are ignored and the standalone unit will follow the configuration stored in the NMC card. The DIP switch settings are in vain.2Fiber SeriesNMC in Chassis NMCCH20 + NMC + NICStandaloneDip switchLi Line card + CH01 dNMCCH02/NMC + NMC + NIC Line card + CH01NMC Card Dip switchfig.1-1: NMC Management & Dip Switch ApplicationWhen a standalone unit with a RS232 console connects by fiber to CH20 or CH02/NMC chassis with NMC card:NMCCPEWhen the standalone unit is powered on, the configuration will first follow the previously saved console setting. After the NMC card starts polling the standalone unit, the local console settings are ignored and the standalone unit will follow the configuration stored in the NMC card. The console settings are then in vain.NMCCH20 + NMC + NICCH01M + NICRS232 Console/ CH02/NMC + NMC + NICCH02M + NICNMC Card RS23 RS232 Consolefig.1-2: NMC Management & RS232 Console ApplicationConsole Management ApplicationWhen a standalone unit with Console port connects to a remote standalone that also has console port:User can use RS-232 Console to setup both CO or CPE unit and save configuration in CO or CPE unit. When powering on the standalone, the standalone configuration will follow console setting. Any DIP switch settings are ignored and are in vain.COCPECH01M + NICCH01M + NICRS232 ConsoleCH02M + NICCH02M + NICRS232 Consolefig.2-1: Console Management ApplicationWhen a standalone with Dip Switch connects to a standalone with console port:User can use RS-232 Console to setup both CO or CPE unit and save configuration in CO or CPE unit. When powering on the standalone, the standalone configuration will follow the saved console settings. The dip switch configuration will be in vain.COCPECH01M + NICRS232 ConsoleCH01 + NICDip switchCH02M + NICCH02 + NICRS23 Console RS232 Console lDip switchfig.2-2: Console Management & Dip Switch ApplicationDip Switch Management ApplicationWhen a standalone with Dip Switch connects to standalone with Dip switch:User can use CO Unit dip switch to setup CO unit configuration or use CPE unit dip switch to setup CPE unit configuration. When CO unit is powered on, the configuration will follow dip switches on the CO unit. When CPE unit is powered on, the configuration will follow dip switches on the CPE unit.COCH01 +NICCPEDip switchCH01 + NICLine card + CH02 CH02 + NICLine card + CH02 CH02 + NICDip switchfig.3-1: Dip Switch Managementwww. c tcu. co mFRM220-NMC2-6Network Management Smart View EMSExample for FRM220Table of ContentsSV-FiberElement Management SystemagerManagement Via NMC CardExample 1: EMS manage FRM220 chassis NIC with NMC card NMC collects NIC status from chassis backplane. EMS does polling NMC SNMP function for FRM220 NIC management. EMS receive SNMP alarm trap from NMC.Fig. 1: Management via NMC cardCOCPE 1PollingElement Management SystemagerEMSAlarm Trap NMC cardCPE 2IP-based point to pointExample 2: EMS manage FRM220 IP-based stand-alone (10/100A, 1000EAS series.) EMS does polling from FRM220 IP-based stand-alone with SNMP for management. EMS receives real-time alarm trap from FRM220 IP-based stand-alone.Figure 2: IP based point to pointCOCPEPollingElement Management SystemagerEMSAlarm TrapIP-based without NMC CardExample 3: EMS manage FRM220 chassis IP-based NIC without NMC card EMS does polling from FRM220 IP-based NIC with SNMP for management. EMS receives real-time alarm traps from FRM220 IP-based NIC.Figure 3: IP-based without NMC Card Figure 3: IP-based without NMC cardCO CO CPE 1CPECH20PollingElement Management SystemagerCH04 CH02 CH02MFRM220 chassis series CH20/04/02/02MEMSAlarm TrapCPE 22-7SV-Fiberw w w. c tc u. co mTable of ContentsNetwork Management1 2Fiber Series Series FiberNIC viewFig. 1: Management via NMC card- UI overviewRack viewoverviewConguration viewFigure 2: IP-based point to point- UI overviewFigure 3: IP-based without NMC Card UI overviewOrdering InformationSmart View Element Management System(EMS) Platform server SV-PLF-05: 5 Client user admission SV-PLF-25: 25 Client user admission SV-PLF-50: 50 Client user admission Device Agents SV-AGT-50: 50 Device agents SV-AGT-100: 100 Device agents SV-AGT-200: 200 Device agents SV-AGT-500: 500 Device agents Managed Modules SV-Fiber: FRM220, FRM220A Example: SV-PLF-05, SV-AGT-50, SV-Fiberwww. c tcu. co mSV-Fiber2-810G Transponder - FRM220Table of Contents10G 3R TransponderFRM220-10G-SSThe FRM220-10G is a series of managed 10G fiber to fiber 3R repeater and transponders. Based on a number of 10 Gigabit Fiber standards, these transponders support SFP+ to SFP+ (SS) fiber connections. The transponders are protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) regeneration between these different optical module types. One of the major applications for this converter is in connecting proprietary transceiver equipment to CWDM or DWDM when these 'colored' optical modules are not available for the proprietary equipment. With full duplex wire speed forwarding capability between the 2 fiber media, the FRM220-10G brings you the best and simplest solution for your 10G conversion between fiber and fiber.Optical Interface Connector FRM220-10G-SS LC, 1x Line SFP+ to 1x Client SFP+ Traffic Format OC-192/STM-64 (9.95328Gbps) 10 Gigabit Ethernet LAN(10.3125Gbps) G.709 OTU2 (10.709225Gbps) Fiber Channel 1xFC(1.062 Gbps); 2xFC(2.125 Gbps); 4xFC(4.25 Gbps); 8xFC(8.5 Gbps); 10xFC(10 Gbps) Regeneration Re-amplification Re-shaping, Re-timing Loopback Fiber Line / Client SM 9/125um DWDM 1529.55 ~ 1565.50nm Indications Power Input Power Consumption Dimensions Weight Temperature Humidity Certification MTBF LED (Power, Line Link, Client Link, Test, Loop back, Port Active, Alarm) Card : 12VDC , Standalone : AC,DC option 25dB@1*10 SC, FC, ST-101280 1550nmThe switching time between is less than 50m secE1 BNC I/FE1 ModuleStandards Ports Framing Data rate Line code Receive Level Line impedance ConnectorE1 Wire-Wrap I/FITU-T G.703, G.704, G.706, G.732 4 ports Unframed ( clear channel ) 2.048 Mbps 50 ppm HDB3/AMI Short haul - 15dB 75 ohms 5% / 120 ohms 5% RJ-45 for 120 ohms BNC for 75 ohms Wirewrap for 120 ohmsDatacom I/FDatacom Interface ModuleStandards Card Type Bit rateN/A V.35/ RS-530 (Include X.21 and RS-449) / RS-232 I/F n x 64K, n = 1 to 32 V.35 & RS-530 up to 2Mbps RS-232 up to 128Kbps (SYNC) V.35H & RS-530H up to 8MbpsLine code Clock ModeNRZ Transparent, Recovery External (From data port) Internal (From oscillator)Control SignalCTS always On or follows RTS DSR constantly ON, except during test loops (RS-530 DSR always connect to DTR) DCD constantly ON,except during fiber signal lossT1 RJ - 45 I/FT1 Interface ModuleStandards Ports Framing Data rate Line code Receive Level Line impedance ConnectorITU-T G.703, G.704, AT&T TR-62411,ANSI T1.403Test Loops ConnectorLocal loop back, Remote loop back, V.54 Type Uses HD-68 pin D type Female with adapter cables4 ports Unframed ( clear channel ) 1.544 Mbps 50 ppm B8ZS / AMI Short haul - 15dB 100 ohms 5% RJ-45 for 100 ohms Wirewrap for 100 ohmsOrdering InformationFMUX01A/Plus Rack FMUX01A/Plus-ACFMUX01A/Plus-DC FMUX01A/Plus-ADExample:FMUX01A/Plus-ACFMUX01A/Plus Modules FMUX01A/Plus-4x E1/T1 FMUX01A/Plus-DATA FMUX01A/Plus-FXO/FXS FMUX01A/Plus-EXT/CLKExample:FMUX01A/Plus-4xE1/T1www. c tcu. co mFMUX01A/Plus 2-100Fiber Optic Multiplexer-FRM220 FamilyPDH Fiber Optic Multiplexer PlatformFMUX20The FMUX20 is a 2U high 19" Rack, 20-slot modular Fiber Optic Multiplexer rack, It provides an economic solution in high density fiber multiplexer installations in central offices. All critical components, Power, fans, management module and interface cards are hot swappable, allowing online field replacement. The hot-swappable power modules can be chosen from AC100-240V, DC18-36. or DC 36-72V. The chassis also has a pair of alarm relays and is able to stack up to 10 chassis as one management unit.Port Network Management Controller Card : Electrical Interface : Console RS232, LAN 10/100Base-TX Indication Network Management Controller Card: Power, FAN Alarm, Act, STK, LAN LNK/SPD Gigabit Ethernet Switch Card FAN, PWR, ALM, STK, LNK/ACT/SPD Power Input Power Consumption Dimensions Weight Temperature Humidity Certification MTBF AC : 100 ~ 240V DC24 : 18 ~ 36V, DC48: 36 ~ 72V 150W 303 x 438 x 88 mm (D x W x H) 5.2g 0 ~ 50 C (Operating), -10 ~ 70 C (Storage) 5 ~90% non-condensing CE, FCC, RoHS 65,000 hrs (25 C)Features 2U 19 20-slot Chassis with AC/DC power redundancy Chassis cascade up to 10 with one IP management Chassis backplane consists of passive components All modules and cards support hot-swap function Two alarm relays20 slot Fiber Optic Multiplexer PlatformTechnologies Supported:Fiber Optic MultiplexerChassis backplane consists of passive components Chassis cascade up to 10 with one IP managementHot swappable Thermal fansTwo Alarm relays Single or optional redundant power supplies2-101FMUX20w w w.c tcu.comFiber Optic Multiplexer-FRM220 FamilyPower RedundancyAll the FMUX20 chassis power supplies are hot swappable and modular, installing two into a chassis provides redundancy should a single power supply fail. A fully loaded chassis can run continuously with only one power module fitted into the chassis.2Fiber SeriesIntelligent Cooling FanTo further increase system reliability, the FMUX20 chassis is fitted with two hot swappable fan modules. Both fan modules can be easily removed from the rear of the chassis, without interruption to the operation of the line cards. A fully loaded chassis can run continuously with only one fan module fitted into the chassisChassis cascadeThe FMUX20 features cascadeable management which allows managing a stack (up to 10 chassis) from a single IP address. Chassis are interconnected with standard UTP cables that carry control signals. Each chassis has its own ID, starting with the master chassis ID0 and cascading up to ID9UTP cableMasterSlave 1Network ManagementThe FMUX20 chassis provides an NMC (Network Management Controller) card which must be installed into the first slot of chassis. The NMC card allows a network administrator with the ability to configure and monitor the status of the blades. Management can be achieved locally over RS232, or over the network by Telnet, Web or SNMP.Slave 910 chassis cascade with one IP managementProtocol SupportedThe FMUX20 chassis has been designed as a Fiber Mux Managed platform. This allows network administrators to deploy the chassis in a wide range of Fiber Mux network. Technologies supported by the chassis included Ethernet Fiber Optic Multiplexer.Slide-in card overviewFiber Optical MultiplexerFiber Optical Multiplexer FOM04Functions 4 channels unframed E1/T1 10/100Base-TX Ethernet Auto MDI/MDIX Auto-Negotiation or Force mode Supports flow control Supports 9K jumbo packets Supports Link fault pass through (LFP) One clear channel RS232 up to 250Kbps(Async) 1+1 fiber protection, less than 50ms Supports Digital Diagnostics Monitoring Interface (DDMI) AIS on signal loss on E1/T1 and fiber port Loopback test on E1/T1, LAN, RS232, fiber ports Supports Dying Gasp Supports local or remote In-band management (Monitor or Configure status) by SNMP manager and console port. Supports Order wire Ear / Microphone port. Supports On-Line F/W upgrade.Ordering InformationFMUX20 ChassisFMUX20-CH20 : 2U 19 20 slot chassis FMUX20-AC : 100 ~ 240 AC power card FMUX20-DC24 : 18 ~ 36 DC power card FMUX20-DC48 : 36 ~ 72 DC power cardExample:Smart View Element Management System(EMS) Platform server SV-PLF-05: 5 Client user admission SV-PLF-25: 25 Client user admission SV-PLF-50: 50 Client user admission Managed Modules SV-Fiber: FMUX20 Example: SV-PLF-05, SV-AGT-50, SV-Fiber Device Agents SV-AGT-50: 50 Device agents SV-AGT-100: 100 Device agents SV-AGT-200: 200 Device agents SV-AGT-500: 500 Device agentsFMUX20-CH20FMUX20 Slide-in cardFMUX20-NMC :Network Management Card FRM220-FOM04 :4E1 +100Mbps Ethernet cardExample:FRM220-FOM04www. c tcu. co mFMUX20 2-102Table of ContentsFiber Optic Multiplexer4 Channel E1/T1, Order wire Plus 100M Ethernet MultiplexerFOM04FOM04 is a standalone 4xE1/T1 + Fast Ethernet Fiber Multiplexer with 1+1 fiber redundancy. FOM04 provides E1/T1 transmissions transparently along with wire-speed 100Mbps Fast Ethernet simultaneously. The fiber optics utilize industry standard SFP technology that allows a flexible use of Multimode or Single mode lines and enables the support of different wavelengths and distances. The use of bi-directional SFPs maximizes the utilization of the fiber optic line and results in saving line costs. With SNMP and Web-based management in the FMUX20, the Network administrator can monitor, configure and control the activity of each card in the chassis.2Fiber SeriesFeatures Occupies two card slots 4 channels unframed E1/T1 10/100Base-TX Ethernet Auto MDI/MDIX Auto-Negotiation or Force mode Supports flow control Supports 9K jumbo packets Supports Link fault pass through (LFP) One clear channel RS232 up to 250Kbps(Async) Standard: ITU-T G.703, G.704, G.706 and G.732 Interface Connectors: RJ-45, Wire wrap, BNC RRLB (Request Remote Loop Back) Test Loops: LLB (Local Loop Back) NELB (Near End Loop Back) RLB (Remote Loop Back) 1+1 fiber protection, less than 50ms Supports Digital Diagnostics Monitoring Interface (DDMI) AIS on signal loss on E1/T1 and fiber port Loopback test on E1/T1, RS232, fiber ports Supports Dying Gasp to detect remote power off Supports local or In-band remote management Supports Order wire Ear / Microphone port. Supports On-Line F/W upgradeE1/T1 portsFraming: Unframed (transparent) Bit Rate: E1:2.048 Mb/s , T1: 1.544Mb/s Line Code: E1:AMI/HDB3, T1: AMI/B8ZS Line Impedance: E1: Unbalanced 75 ohms (BNC) E1: Balanced 120 ohms (RJ-45) T1: Balanced 120 ohms (RJ-45) Receiver sensitivity: Short haul Pulse" Amplitude: Nominal 2.37V+/-10% for 75 ohms Nominal 3.00V+/-10% for 120 ohms Nom Zero" Amplitude: +/-0.3V Transmit Frequency Tracking: w/external clock card option Internal Timing: +/-30 ppm Jitter Performance: According to ITU-T G.823 Performance monitoring: According to ITU-T G.821Dimensions155 x 88 x 23mm (D x W x H)Operating Temperature0~50C (Operating) ,-10~20C (Storage)Humidity10~90% non-condensingCertificationsCE, FCC, RoHSEthernetInterface Type: 10/100Base-TX Connector: 4xRJ-45 Standard: IEEE 802.3, 802.3u Duplex modes: full/half Test: Loop back testIndicationFX1 Link, FX2 link , E1/T1 Mode/Link/Loopback test , Order wire phone indicator , LAN Link/Speed.Power InputAC, DC OptionManaged 4E1/T1 + Fast Ethernet Fiber Optical MultiplexerSTM1FMUX20-FOM04 inserted in FMUX20 ChassisEMS Order Wire RS232 clear channel ADMFMUX204E1/T1Ordering InformationLANFOM04-DC12: PDH/Ethernet MUX with AC to DC adapter FOM04-DC48: PDH/Ethernet MUX with 48VDC FOM04-AC : PDH/Ethernet MUX with 100~240VACPDH Fiber Optic Multiplexer Platform1+1 Fiber ProtectionLocal ManagementFOM04RS232 clear channel4E1/T1LANFOM04Local ManagementOrder WireOrder Wire4E1/T1LANPBXPBXwww. c tcu. co mFOM04 2-104Fiber Optic Multiplexer4 Channel E1/T1, Order wire Plus 100M Ethernet Multiplex

ctc union 2011 product catalog

Documents

fiber et100 ethernet

fiber serial rs485

x rs485422232 fiber

fiber fxofxs pots

fast ethernet

fom04 ethernet pdh multiplexer

easx gigabit ethernet

g cwdm