cs61c l15 floating point i (1) garcia, fall 2011 © ucb lecturer soe dan garcia ddgarcia...
Post on 21-Dec-2015
218 views
TRANSCRIPT
CS61C L15 Floating Point I (1) Garcia, Fall 2011 © UCB
Lecturer SOE Dan Garcia
www.cs.berkeley.edu/~ddgarcia
inst.eecs.berkeley.edu/~cs61c CS61C : Machine Structures
Lecture 15Floating Point
2011-09-30
Koomey’s law Stanford Prof Jonathan Koomey
looked at 6 decades of data (including pre-electronic) and found that energy
efficiency of computers doubles roughly every 18 months. This is even more relevant as
battery-powered devices become more popular. www.technologyreview.com/computing/38548/
Hello to Ahmed Bahjatlistening from Penn State!
CS61C L15 Floating Point I (2) Garcia, Fall 2011 © UCB
Quote of the day
“95% of thefolks out there are
completely clueless about floating-point.”
James GoslingSun FellowJava Inventor1998-02-28
CS61C L15 Floating Point I (3) Garcia, Fall 2011 © UCB
Review of Numbers•Computers are made to deal with numbers
•What can we represent in N bits?• 2N things, and no more! They could be…• Unsigned integers:
0 to 2N - 1
(for N=32, 2N–1 = 4,294,967,295)• Signed Integers (Two’s Complement)
-2(N-1) to 2(N-1) - 1
(for N=32, 2(N-1) = 2,147,483,648)
CS61C L15 Floating Point I (4) Garcia, Fall 2011 © UCB
What about other numbers?
1. Very large numbers? (seconds/millennium) 31,556,926,00010 (3.155692610 x 1010)
2. Very small numbers? (Bohr radius) 0.000000000052917710m (5.2917710 x 10-11)
3. Numbers with both integer & fractional parts? 1.5
First consider #3.
…our solution will also help with 1 and 2.
CS61C L15 Floating Point I (5) Garcia, Fall 2011 © UCB
Representation of Fractions
“Binary Point” like decimal point signifies boundary between integer and fractional parts:
xx.yyyy21
20 2-1 2-2 2-3 2-4
Example 6-bit representation:
10.10102 = 1x21 + 1x2-1 + 1x2-3 = 2.62510
If we assume “fixed binary point”, range of 6-bit representations with this format:
0 to 3.9375 (almost 4)
CS61C L15 Floating Point I (6) Garcia, Fall 2011 © UCB
Fractional Powers of 2
0 1.0 11 0.5 1/22 0.25 1/43 0.125 1/84 0.0625 1/165 0.03125 1/326 0.0156257 0.00781258 0.003906259 0.00195312510 0.000976562511 0.0004882812512 0.00024414062513 0.000122070312514 0.0000610351562515 0.000030517578125
i 2-iMark Lu’s “Binary Float Displayer”
http://inst.eecs.berkeley.edu/~marklu/bfd/?n=1000
CS61C L15 Floating Point I (7) Garcia, Fall 2011 © UCB
Representation of Fractions with Fixed Pt.
What about addition and multiplication?
Addition is straightforward:
01.100 1.510
+ 00.100 0.510
10.000 2.010
Multiplication a bit more complex:
01.100 1.510
00.100 0.510
00 000 000 00 0110 0 00000 000000000110000
Where’s the answer, 0.11? (need to remember where point is)
CS61C L15 Floating Point I (8) Garcia, Fall 2011 © UCB
Representation of FractionsSo far, in our examples we used a “fixed” binary point what we really want is to “float” the binary point. Why?Floating binary point most effective use of our limited bits (and
thus more accuracy in our number representation):
… 000000.001010100000…
Any other solution would lose accuracy!
example: put 0.1640625 into binary. Represent as in 5-bits choosing where to put the binary point.
Store these bits and keep track of the binary point 2 places to the left of the MSB
With floating point rep., each numeral carries a exponent field recording the whereabouts of its binary point.
The binary point can be outside the stored bits, so very large and small numbers can be represented.
CS61C L15 Floating Point I (9) Garcia, Fall 2011 © UCB
Scientific Notation (in Decimal)
6.0210 x 1023
radix (base)decimal point
mantissa exponent
• Normalized form: no leadings 0s (exactly one digit to left of decimal point)
• Alternatives to representing 1/1,000,000,000• Normalized: 1.0 x 10-9
• Not normalized: 0.1 x 10-8,10.0 x 10-10
CS61C L15 Floating Point I (10) Garcia, Fall 2011 © UCB
Scientific Notation (in Binary)
1.01two x 2-1
radix (base)“binary point”
exponent
•Computer arithmetic that supports it called floating point, because it represents numbers where the binary point is not fixed, as it is for integers
• Declare such variable in C as float
mantissa
CS61C L15 Floating Point I (11) Garcia, Fall 2011 © UCB
Floating Point Representation (1/2)•Normal format: +1.xxx…xtwo*2yyy…ytwo
•Multiple of Word Size (32 bits)
031S Exponent30 23 22
Significand
1 bit 8 bits 23 bits
•S represents SignExponent represents y’sSignificand represents x’s
•Represent numbers as small as 2.0 x 10-38 to as large as 2.0 x 1038
CS61C L15 Floating Point I (12) Garcia, Fall 2011 © UCB
Floating Point Representation (2/2)•What if result too large?
(> 2.0x1038 , < -2.0x1038 )• Overflow! Exponent larger than represented in 8-
bit Exponent field
•What if result too small? (>0 & < 2.0x10-38 , <0 & > -2.0x10-38 )• Underflow! Negative exponent larger than
represented in 8-bit Exponent field
•What would help reduce chances of overflow and/or underflow?
0 2x10-38 2x10381-1 -2x10-38-2x1038
underflow overflowoverflow
CS61C L15 Floating Point I (13) Garcia, Fall 2011 © UCB
IEEE 754 Floating Point Standard (1/3)Single Precision (DP similar):
• Sign bit: 1 means negative0 means positive
• Significand:• To pack more bits, leading 1 implicit for
normalized numbers• 1 + 23 bits single, 1 + 52 bits double• always true: 0 < Significand < 1
(for normalized numbers)
• Note: 0 has no leading 1, so reserve exponent value 0 just for number 0
031S Exponent30 23 22
Significand
1 bit 8 bits 23 bits
CS61C L15 Floating Point I (14) Garcia, Fall 2011 © UCB
IEEE 754 Floating Point Standard (2/3)
• IEEE 754 uses “biased exponent” representation. • Designers wanted FP numbers to be used even if no FP hardware; e.g., sort records with FP numbers using integer compares
• Wanted bigger (integer) exponent field to represent bigger numbers.
• 2’s complement poses a problem (because negative numbers look bigger)
• We’re going to see that the numbers are ordered EXACTLY as in sign-magnitude
I.e., counting from binary odometer 00…00 up to 11…11 goes from 0 to +MAX to -0 to -MAX to 0
CS61C L15 Floating Point I (15) Garcia, Fall 2011 © UCB
IEEE 754 Floating Point Standard (3/3)•Called Biased Notation, where bias is number subtracted to get real number• IEEE 754 uses bias of 127 for single prec.• Subtract 127 from Exponent field to get actual value for exponent
• 1023 is bias for double precision
•Summary (single precision):031
S Exponent30 23 22
Significand
1 bit 8 bits 23 bits• (-1)S x (1 + Significand) x 2(Exponent-127)
• Double precision identical, except with exponent bias of 1023 (half, quad similar)
CS61C L15 Floating Point I (16) Garcia, Fall 2011 © UCB
“Father” of the Floating point standard
IEEE Standard 754 for Binary Floating-Point
Arithmetic.
www.cs.berkeley.edu/~wkahan/ieee754status/754story.html
Prof. Kahan
1989ACM Turing
Award Winner!
CS61C L15 Floating Point I (17) Garcia, Fall 2011 © UCB
Representation for ± ∞• In FP, divide by 0 should produce ± ∞, not overflow.
•Why?• OK to do further computations with ∞ E.g., X/0 > Y may be a valid comparison
• Ask math majors
• IEEE 754 represents ± ∞• Most positive exponent reserved for ∞• Significands all zeroes
CS61C L15 Floating Point I (18) Garcia, Fall 2011 © UCB
Representation for 0•Represent 0?
• exponent all zeroes• significand all zeroes• What about sign? Both cases valid.+0: 0 00000000 00000000000000000000000
-0: 1 00000000 00000000000000000000000
CS61C L15 Floating Point I (19) Garcia, Fall 2011 © UCB
Special Numbers•What have we defined so far? (Single Precision)
Exponent Significand Object
0 0 0
0 nonzero ???
1-254 anything +/- fl. pt. #
255 0 +/- ∞
255 nonzero ???
•Professor Kahan had clever ideas; “Waste not, want not”
• Wanted to use Exp=0,255 & Sig!=0
CS61C L15 Floating Point I (20) Garcia, Fall 2011 © UCB
Representation for Not a Number•What do I get if I calculate sqrt(-4.0)or 0/0?
• If ∞ not an error, these shouldn’t be either• Called Not a Number (NaN)• Exponent = 255, Significand nonzero
•Why is this useful?• Hope NaNs help with debugging?• They contaminate: op(NaN, X) = NaN• Can use the significand to identify which!
CS61C L15 Floating Point I (21) Garcia, Fall 2011 © UCB
Representation for Denorms (1/2)•Problem: There’s a gap among representable FP numbers around 0
• Smallest representable pos num:a = 1.0… 2 * 2-126 = 2-126
• Second smallest representable pos num:b = 1.000……1 2 * 2-126
= (1 + 0.00…12) * 2-126 = (1 + 2-23) * 2-126 = 2-126 + 2-149
a - 0 = 2-126
b - a = 2-149
b
a0+-
Gaps!
Normalization and implicit 1is to blame!
CS61C L15 Floating Point I (22) Garcia, Fall 2011 © UCB
Representation for Denorms (2/2)
•Solution:• We still haven’t used Exponent = 0, Significand nonzero
• DEnormalized number: no (implied) leading 1, implicit exponent = -126.
• Smallest representable pos num:a = 2-149
• Second smallest representable pos num:b = 2-148
0+-
CS61C L15 Floating Point I (23) Garcia, Fall 2011 © UCB
Special Numbers Summary
•Reserve exponents, significands:Exponent Significand Object0 0 00 nonzero Denorm1-254 anything +/- fl. pt. #255 0 +/- ∞255 nonzero NaN
CS61C L15 Floating Point I (24) Garcia, Fall 2011 © UCB
Conclusion• Floating Point lets us:
• Represent numbers containing both integer and fractional parts; makes efficient use of available bits.
• Store approximate values for very large and very small #s.
• IEEE 754 Floating Point Standard is most widely accepted attempt to standardize interpretation of such numbers (Every desktop or server computer sold since ~1997 follows these conventions)
•Summary (single precision):031
S Exponent30 23 22
Significand
1 bit 8 bits 23 bits• (-1)S x (1 + Significand) x 2(Exponent-127)
• Double precision identical, except with exponent bias of 1023 (half, quad similar)
Exponent tells Significand how much (2i) to count by (…, 1/4, 1/2, 1, 2, …)
Can store NaN, ± ∞
www.h-schmidt.net/FloatApplet/IEEE754.html
CS61C L15 Floating Point I (25) Garcia, Fall 2011 © UCB
Bonus slides
•These are extra slides that used to be included in lecture notes, but have been moved to this, the “bonus” area to serve as a supplement.
•The slides will appear in the order they would have in the normal presentation
CS61C L15 Floating Point I (26) Garcia, Fall 2011 © UCB
Example: Converting Binary FP to Decimal
•Sign: 0 positive
•Exponent: • 0110 1000two = 104ten
• Bias adjustment: 104 - 127 = -23
•Significand:1 + 1x2-1+ 0x2-2 + 1x2-3 + 0x2-4 + 1x2-5 +...=1+2-1+2-3 +2-5 +2-7 +2-9 +2-14 +2-15 +2-17 +2-22
= 1.0 + 0.666115
0 0110 1000 101 0101 0100 0011 0100 0010
•Represents: 1.666115ten*2-23 ~ 1.986*10-7
(about 2/10,000,000)
CS61C L15 Floating Point I (27) Garcia, Fall 2011 © UCB
Example: Converting Decimal to FP
1. Denormalize: -23.40625
2. Convert integer part:23 = 16 + ( 7 = 4 + ( 3 = 2 + ( 1 ) ) ) = 101112
3. Convert fractional part:.40625 = .25 + ( .15625 = .125 + ( .03125 ) ) = .011012
4. Put parts together and normalize:10111.01101 = 1.011101101 x 24
5. Convert exponent: 127 + 4 = 100000112
1 1000 0011 011 1011 0100 0000 0000 0000
-2.340625 x 101
CS61C L15 Floating Point I (28) Garcia, Fall 2011 © UCB
Administrivia…Midterm in < 2 weeks!
•Midterm scheduled! 2011-10-06 Thursday @ 7-9pm
• How should we study for the midterm?• Form study groups…don’t prepare in isolation!• Attend the review session• Look over HW, Labs, Projects, class notes!• Go over old exams – HKN office has put them online
(link from 61C home page)• Attend TA office hours and work out hard probs
CS61C L15 Floating Point I (29) Garcia, Fall 2011 © UCB
Double Precision Fl. Pt. Representation•Next Multiple of Word Size (64 bits)
•Double Precision (vs. Single Precision)• C variable declared as double• Represent numbers almost as small as 2.0 x 10-308 to almost as large as 2.0 x 10308
• But primary advantage is greater accuracy due to larger significand
031S Exponent
30 20 19Significand
1 bit 11 bits 20 bitsSignificand (cont’d)
32 bits
CS61C L15 Floating Point I (30) Garcia, Fall 2011 © UCB
QUAD Precision Fl. Pt. Representation•Next Multiple of Word Size (128 bits)
• Unbelievable range of numbers• Unbelievable precision (accuracy)
• IEEE 754-2008 “binary128” standard• Has 15 exponent bits and 112 significand bits (113 precision bits)
•Oct-Precision? • Some have tried, no real traction so far
•Half-Precision? • Yep, “binary16”: 1/5/10
en.wikipedia.org/wiki/Floating_point
CS61C L15 Floating Point I (31) Garcia, Fall 2011 © UCB
Understanding the Significand (1/2)•Method 1 (Fractions):
• In decimal: 0.34010 34010/100010
3410/10010
• In binary: 0.1102 1102/10002 = 610/810
112/1002 = 310/410
• Advantage: less purely numerical, more thought oriented; this method usually helps people understand the meaning of the significand better
CS61C L15 Floating Point I (32) Garcia, Fall 2011 © UCB
Understanding the Significand (2/2)•Method 2 (Place Values):
• Convert from scientific notation• In decimal: 1.6732 = (1x100) + (6x10-1) + (7x10-2) + (3x10-3) + (2x10-4)
• In binary: 1.1001 = (1x20) + (1x2-1) + (0x2-
2) + (0x2-3) + (1x2-4)• Interpretation of value in each position extends beyond the decimal/binary point
• Advantage: good for quickly calculating significand value; use this method for translating FP numbers
CS61C L15 Floating Point I (33) Garcia, Fall 2011 © UCB
Precision and Accuracy
Precision is a count of the number bits in a computer word used to represent a value.
Accuracy is a measure of the difference between the actual value of a number and its computer representation.
Don’t confuse these two terms!
High precision permits high accuracy but doesn’t guarantee it. It is possible to have high precisionbut low accuracy.
Example: float pi = 3.14;pi will be represented using all 24 bits of the significant (highly precise), but is only an approximation (not accurate).
CS61C L15 Floating Point I (34) Garcia, Fall 2011 © UCB
Rounding•When we perform math on real numbers, we have to worry about rounding to fit the result in the significant field.
•The FP hardware carries two extra bits of precision, and then round to get the proper value
•Rounding also occurs when converting: double to a single precision value, or
floating point number to an integer
CS61C L15 Floating Point I (35) Garcia, Fall 2011 © UCB
IEEE FP Rounding Modes
• Round towards + ∞• ALWAYS round “up”: 2.001 3, -2.001 -2
• Round towards - ∞• ALWAYS round “down”: 1.999 1, -1.999 -2
• Truncate• Just drop the last bits (round towards 0)
• Unbiased (default mode). Midway? Round to even• Normal rounding, almost: 2.4 2, 2.6 3, 2.5 2, 3.5 4• Round like you learned in grade school (nearest int)• Except if the value is right on the borderline, in which case
we round to the nearest EVEN number• Ensures fairness on calculation• This way, half the time we round up on tie, the other half time
we round down. Tends to balance out inaccuracies
Examples in decimal (but, of course, IEEE754 in binary)
CS61C L15 Floating Point I (36) Garcia, Fall 2011 © UCB
FP Addition
•More difficult than with integers
•Can’t just add significands
•How do we do it?• De-normalize to match exponents• Add significands to get resulting one• Keep the same exponent• Normalize (possibly changing exponent)
•Note: If signs differ, just perform a subtract instead.
CS61C L15 Floating Point I (37) Garcia, Fall 2011 © UCB
MIPS Floating Point Architecture (1/4)
•MIPS has special instructions for floating point operations:
• Single Precision:add.s, sub.s, mul.s,
div.s• Double Precision:
add.d, sub.d, mul.d, div.d
•These instructions are far more complicated than their integer counterparts. They require special hardware and usually they can take much longer to compute.
CS61C L15 Floating Point I (38) Garcia, Fall 2011 © UCB
MIPS Floating Point Architecture (2/4)
•Problems:• It’s inefficient to have different instructions take vastly differing amounts of time.
• Generally, a particular piece of data will not change from FP to int, or vice versa, within a program. So only one type of instruction will be used on it.
• Some programs do no floating point calculations
• It takes lots of hardware relative to integers to do Floating Point fast
CS61C L15 Floating Point I (39) Garcia, Fall 2011 © UCB
MIPS Floating Point Architecture (3/4)
•1990 Solution: Make a completely separate chip that handles only FP.
•Coprocessor 1: FP chip• contains 32 32-bit registers: $f0, $f1, …• most registers specified in .s and .d instruction refer to this set
• separate load and store: lwc1 and swc1(“load word coprocessor 1”, “store …”)
• Double Precision: by convention, even/odd pair contain one DP FP number: $f0/$f1, $f2/$f3, … , $f30/$f31
CS61C L15 Floating Point I (40) Garcia, Fall 2011 © UCB
MIPS Floating Point Architecture (4/4)
•1990 Computer actually contains multiple separate chips:
• Processor: handles all the normal stuff• Coprocessor 1: handles FP and only FP; • more coprocessors?… Yes, later• Today, cheap chips may leave out FP HW
• Instructions to move data between main processor and coprocessors:
• mfc0, mtc0, mfc1, mtc1, etc.
•Appendix pages A-70 to A-74 contain many, many more FP operations.
CS61C L15 Floating Point I (41) Garcia, Fall 2011 © UCB
Example: Representing 1/3 in MIPS•1/3
= 0.33333…10
= 0.25 + 0.0625 + 0.015625 + 0.00390625 + …
= 1/4 + 1/16 + 1/64 + 1/256 + …
= 2-2 + 2-4 + 2-6 + 2-8 + …
= 0.0101010101… 2 * 20
= 1.0101010101… 2 * 2-2
• Sign: 0• Exponent = -2 + 127 = 125 = 01111101• Significand = 0101010101…
0 0111 1101 0101 0101 0101 0101 0101 010
CS61C L15 Floating Point I (42) Garcia, Fall 2011 © UCB
Casting floats to ints and vice versa(int) floating_point_expression
Coerces and converts it to the nearest integer (C uses truncation)
i = (int) (3.14159 * f);
(float) integer_expressionconverts integer to nearest floating point
f = f + (float) i;
CS61C L15 Floating Point I (43) Garcia, Fall 2011 © UCB
int float int
•Will not always print “true”
•Most large values of integers don’t have exact floating point representations!
•What about double?
if (i == (int)((float) i)) {
printf(“true”);
}
CS61C L15 Floating Point I (44) Garcia, Fall 2011 © UCB
float int float
•Will not always print “true”
•Small floating point numbers (<1) don’t have integer representations
•For other numbers, rounding errors
if (f == (float)((int) f)) {
printf(“true”);
}
CS61C L15 Floating Point I (45) Garcia, Fall 2011 © UCB
Floating Point Fallacy•FP add associative: FALSE!
• x = – 1.5 x 1038, y = 1.5 x 1038, and z = 1.0• x + (y + z) = –1.5x1038 + (1.5x1038 + 1.0)
= –1.5x1038 + (1.5x1038) = 0.0• (x + y) + z = (–1.5x1038 + 1.5x1038) + 1.0
= (0.0) + 1.0 = 1.0
•Therefore, Floating Point add is not associative!
• Why? FP result approximates real result!• This example: 1.5 x 1038 is so much larger than 1.0 that 1.5 x 1038 + 1.0 in floating point representation is still 1.5 x 1038
CS61C L15 Floating Point I (46) Garcia, Fall 2011 © UCB
Peer Instruction
What is the decimal equivalent of the floating pt # above?
1 1000 0001 111 0000 0000 0000 0000 0000a) -7 * 2^129b) -3.5c) -3.75d) -7e) -7.5
CS61C L15 Floating Point I (48) Garcia, Fall 2011 © UCB
Peer Instruction
1. Converting float -> int -> float produces same float number
2. Converting int -> float -> int produces same int number
3. FP add is associative:(x+y)+z = x+(y+z)
ABC1: FFF2: FFT 3: FTF4: FTT5: TFF6: TFT7: TTF8: TTT