cs usa catalog 2019 0619 - crc line · 127.972 beige/3,97 lbs tin (incl. hardener) 1 6 132.116...

CATALOG

a trademark of

>AAcryl Thinner ..................................................... 22Alu Spezial ........................................................ 9

>BBPO Hardener ................................................... 8

>CCar Grip ............................................................ 6Carbo Spray ...................................................... 24Carbo Spray Thinner ......................................... 242K Carbo Clear Plus ......................................... 242K Clear VOC Silkmatt ...................................... 233K Carbo Spray ................................................ 23CHP hardener for Spray .................................... 10Cockpit-Spray ................................................... 14

>DDry Coat-black ................................................13Dualmatic ........................................................11

>FFlex ................................................................... 9Foam Tape ........................................................ 12

>GGlas white ......................................................... 7

>HHpP Primer ....................................................... 21HpP Primer Spray ............................................. 21

>KKS-100 .............................................................. 16KS-1000 ............................................................ 18KS-1050 ............................................................ 18KS-200 .............................................................. 16KS-250 .............................................................. 16KS-300 .............................................................. 17KS-3000 Plus .................................................... 18KS-4000 ............................................................ 19KS-50 ................................................................ 15KS-500 .............................................................. 17KS-550 .............................................................. 17KS-Dual Gun ..................................................... 19KS-Gun ............................................................. 19

>LLiquid Putty....................................................... 8

>MMagnetic Flat Strip ........................................... 14Magnetic Sanding Protection............................ 13Master Tape Green ........................................... 12Metal Spray Out Cards ..................................... 13

>MMulti Glas Green ............................................... 7Multi Green ....................................................... 6Multi Plus .......................................................... 9Multi Silver Light ............................................... 10

>N1K NC Putty ...................................................... 8

>PPad Saver ......................................................... 27Paint Planer ...................................................... 22Plastic Cleaner .................................................. 22Plastic Pro......................................................... 9Plastic Spreader ............................................... 11ProFlex Interface Pad ....................................... 28ProFlex Interface Pad ...................................... 27ProFlex Interface Pad ...................................... 27ProFlex Jupiter .................................................. 26ProFlex Jupiter .................................................. 27ProFlex Kit #1 ................................................... 26ProFlex Kit #2 ................................................... 26ProFlex Pluto .................................................... 28ProFlex Pluto Sanding Block ............................ 28Putty Knife ........................................................ 11

>RRefinish Restorer .............................................. 14Rust Remover Spray ......................................... 14

>SSilicone Remover Mild ...................................... 23Silver Wheel ...................................................... 15Slim Tape .......................................................... 12Soft ................................................................... 6Spray ................................................................ 101K Spray Primer ................................................ 11Spray Thinner ................................................... 10Steel.................................................................. 7

>TTouch Up .......................................................... 13

>UUV Clear............................................................ 20UV FILLER Spray .............................................. 21UV LED Lamp ................................................... 20UV Spraygun cleaner ........................................ 21

>WWR-Lifting Tape Premium ................................. 1212W UV LED Lamps w/Tripod ........................... 20

>ZZink-Spray ........................................................ 15

The information is intended as aguide to application and is based on current information. The information is offered in good faith and without guarantee or liability.Product specifications subject to change availability.

© VOSSCHEMIE

QUICKFINDER

2

Art. No. Product Page

123.892 DUALMATIC 3 KG 32 EXV AV 6

124.315 CS SPRAY THINNER 10

124.623 BPO HARDENER for Soft & Multi Green 8

125.580 CS 1K Spray Primer 11

126.020 CS Cockpit-SPRAY 14

126.021 CS Silver-Wheel-SPRAY 15

126.023 CS KS-1050 StoneChipProtect. black 18

126.028 CS Rust Remover SPRAY 14

126.029 CS KS-550 Bitumen SPRAY black 17

126.030 CS Zinc-SPRAY 15

126.032 CS KS-100 Bitumenbase brushable 16

126.034 CS KS-500 Bitumen black 17

126.040 CS KS-Dual Gun 1-2 UBS Gun 17

126.048 CS Suction Pipe for KS Dual-Gun 19

126.058 CS CAVITY PROTECTION TUBE for Dual Gun 19

126.061 CS KS-250 Cavity Protection 16

126.062 CS KS-200 Cavity Protection ML 16

127.972 CS SOFT incl.hardener 6

127.978 CS SPRAY incl.hardener 10

128.366 CS DRY-COAT black 13

130.992 CS Magnetic Sanding Protection 4x55cm 13

132.116 CS SOFT H19 incl.hardener cartridge KG 2,6 6

132.413 BPO-HARDENER USA red Förster 8

133.827 CS SLIM TAPE 18mm × 50m 12

134.165 CS KS-300 Cavity Wax white-transp. 17

134.374 CS KS-4000 water based black 19

134.796 CS FLEX incl.hardener 9

135.396 CS KS-Gun 17

137.214 CS Magnetic Flat Strip 4x55cm Set 14

137.435 CS PUTTY KNIFE Special Steel Spreader 60mm 11



138.451 CS MULTI PLUS INKL. HARDENER 9

138.587 CS STEEL incl.hardener 7

140.795 CS Multi Silver Light incl hardener 10

142.279 CS KS-Gun tube set 18

142.889 CS Putty Board Set (10 pcs.) 11

142.995 Paint Planer 22

142.996 Paint Planer Holder 22

143.496 CS Liquid Putty incl.hardener 8

144.808 CS GLAS WHITE incl.BPO white 7

145.985 CS Plastic Cleaner 22

146.191 CS SPRAY CARD metal WHITE 13

146.608 CS SPRAY CARD DARK GREY 13

146.706 CS MULTI GREEN incl. hardener KG 6

146.707 CS MULTI GLAS GREEN incl.hardener 7

146.711 CS Silicone Remover Mild 23

147.337 CS MULTI GREEN H19 incl.hardener 11

147.473 CHP HARDENER for Spray 10

148.019 CS CARBO SPRAY incl. MEKP hardener 24

148.234 CS CARBO SPRAY THINNER 24

148.524 CS ALU SPEZIAL INKL. HARDENER 9

148.861 CS FOAM TAPE Classic 13 mm BOX (oval) 12

148.983 CS 2K Clear VOC Matt 23

Art. No. Product Page

148.984 CS 2K VOC hardener matt 23

148.986 CS 2K Clear VOC silkmatt 23

149.221 CS MASTER TAPE GREEN 19 mm × 50 m 12



149.265 CS KS-1000 Stone Chip Protection black 18

149.613 CS PLASTIC PRO incl. hardener 9

150.331 CS Acryl Thinner 22

150.769 CS TOUCH UP BOTTLE transp. 25 pcs 13

150.801 CS KS-50 Brushable SEAM SEALER 15

151.071 CS Refinish Restorer 14

151.504 CS WR-LIFTING TAPE PREMIUM 9+11mmx10 m 12

152.719 CS Plastiksp. 115x77mm Box á 100 St 6

152.804 CS KS-3000 Plus Stone Protect.grey 18

153.207 CS 2K Carbo Clear Plus 5 l 24

153.217 CS 2K Carbo Clear Plus 1 l 24

153.432 CS CarGrip USA incl. Hardener 6

153.466 ProFlex P 2000 / no holes / ø 75 mm 27



153.777 CS UV Smart Lamp 20

154.093 CS IND 1K NC Putty 8

154.099 ProFlex Pad Saver á 5 pcs. / bag 27

154.189 CS UV Filler 21

154.190 CS UV Filler Spray 21

154.296 ProFlex Interface Pad soft 75 mm 27

154.297 ProFlex Pluto sanding Block 27

154.428 ProFlex P 1500 / ø 34 mm 28

154.429 ProFlex P 2000 / ø 34 mm 28

154.430 ProFlex P 2500 / ø 34 mm 28

154.431 ProFlex P 3000 / ø 34 mm 28


154.528 CS UV Clear 20

154.615 CS UV Gun Cleaner 21

154.645 CS 12W UV LED Lamp 20

154.646 CS Stand for UV LED Lamp XL 21

154.648 CS Magnet for UV LED Lamp XL 20





154.706 HpP Primer white 21

154.707 HpP Primer grey 21

154.708 HpP Primer black 21

154.709 HpP Primer Spray white 21

154.710 HpP Primer Spray grey 21

154.711 HpP Primer Spray black 21

154.712 HpP Primer thinner 21

154.980 CS 12W UV LED Lamps w/Tripod 20

155.036 CS UV LED Lamp XL 20

155.097 ProFlex Interface Pad / no holes / 34 mm 28

155.098 ProFlex Interface Pad hard 75 mm 27


155.199 CS 3K Carbo Spray 23

REGISTER

3

Car GripLightweight Perfomance Body Filler

AREA OF APPLICATION

Use for Dents to Small Scratches with the same Product. Works on the most Automotive Substrates.

CHARACTERISTICS

• Improves cycle time• High Standard of qualitly• No need for Body Filler & Putty, Car Grip is both in one

Art. No. Specification SP MOQ

153.432light blue / 8,82 lbs (4000g)

tin (incl. hardener)1 6

152.719CS Plastic Spreader Box

á 100 pcs.1 1

Softpolyester body putty

AREA OF APPLICATION

For filling deep, uneven areas, particularly suitable for large areas.

CHARACTERISTICS

Easily sandable, high viscosity, concentrated filling, pore-free surface.


127.972 beige / 3,97 lbs tin (incl. hardener) 1 6

132.116beige / 5,73 lbs cartridge

(incl. hardener)1 6


á 100 pcs.1 1

123.892Putty dispenser-manual

for 3kg cartridges1 1

Multi Greenpolyester multifunctional putty – green

AREA OF APPLICATION

For universal use on all steel, aluminium and galvanised bodywork in car repairs as well as on GRP and wooden parts.

CHARACTERISTICS

Multifunctional putty for a variety of surfaces. This new multifunctional putty is a complete new developed putty with resins and fillers of the latest generation. This high thixotropic putty is characterised by a high stability during application matched with a rapid drying time and a pore-free surface before sanding. VOC reduced.


146.706 green / 3.53 lbs tin (incl. hardener) 1 6

147.337green 5.56 lbs cartridge

(incl. hardener)1 6

152.719 CS Plastic Spreader Box á 100 pcs. 1 1

123.892Putty dispenser-manual

for 3kg cartridges1 1

CARSYSTEM

4

Multi Glas Greenpolyester multifunctional fibreglass reinorced putty – green

AREA OF APPLICATION

Reinforced fibreglass putty for steel-, aluminium- and galvanised carbodies as well as for GRP and wooden elements.

CHARACTERISTICS

This new fibreglass putty has not only a wide range of surface applications but also enhanced improvements in spreading behaviour, sandability and an even more pore-free surface as conventional fibreglass putties. VOC reduced.


146.707green / 3.64 lbs (1.650 g) tin

(incl. hardner)1 6


á 100 pcs.1 1

Glas whitepolyester fibreglass reinforced putty – white

AREA OF APPLICATION

A fibreglass filler for repairing GRP components and for filling deeper uneven areas.

CHARACTERISTICS

This white fibreglass putty has a direct adhesion on GRP components, steel and wood. The white neutral color makes it versatile applicable on these var-ious surfaces. It‘s modified fibre structure offers a better spreading behaviour and makes it easier to sand.


144.808white / 3.97 lbs (1.800 g) tin

(incl. hardener)1 6


á 100 pcs.1 1

Steelpolyester body putty

AREA OF APPLICATION

For filling bodywork edges, wing flanges and joints, as well as for repairs to tank supports and door edges.

CHARACTERISTICS

Putty with a very high degree of hardness. Suitable for special repairs.


138.587alu-grey / 1.98 lbs (900g) tin

(incl. hardener)1 6


á 100 pcs.1 1

For all our polyester body pastes:If there is resin floating on top, please don’t mix but thr ow it away. Mixing causes air pockets in the paste and pinholes on the surface.

For all our putties / Body Fillers: If there is resin floating on top, please DON’T attempt to mix resin into the product, instead pour off extra resin into an approved waste container. Mixing causes air pockets in the paste and pinholes on the surface.

CARSYSTEM

5

Liquid Puttypolyester finishing putty

AREA OF APPLICATION

Liquid Putty is used for filling small surface imperfections like scratches and pinholes before applying the primer / filler. It can be used to fill up to approx. 3 mm deep imperfections.

CHARACTERISTICS

Liquid Putty is a 2 component polyester finishing. Liquid Putty has been spe-cially developed for the professional. It has excellent adhesion to metal, body filler, wood, fibreglass, catalysed primers and old / sanded OEM topcoats.


143.496beige / 2.20 lbs (1.000 g) bottle

(incl. hardener)1 8


á 100 pcs.1 1

1K NC Puttykombi putty

CHARACTERISTICS

The CS 1K NC Putty is 1-component nitrocellulose-based filler. The puty is ideal for spot repair of small uneveness, such as scratches, holes or stone damages. By application in thin layers, the filler dries very fast and forms an smooth surface. The 1K NC Putty is applicable on polyser fillers, acrylic fillers, metal, steel, aluminium and galvanized surfaces.


154.093CS 1K NC Putty 7,05 oz.

(200g)1 24

BPO HardenerBPO Hardener

AREA OF APPLICATION

BPO hardener for polyester putty.


132.413red / BPO hardener tube /

1,41 oz (40 g)10 10

BPO HardenerBPO Hardener for Soft & Multi Green

AREA OF APPLICATION

BPO hardener for polyester putty.


124.623 red / BPO hardener / 55 g 10 10

CARSYSTEM

6

Plastic Proplastic putty

AREA OF APPLICATION

To repair scratches and damages on plastic parts.

CHARACTERISTICS

A specialized new developed plastic putty for the most common plastics available on the market. The putty has excellent properties such as adhesion, elasticity and sandability as well as fineness of the surface.


149.613black / 2.20 lbs (1.000g) tin

(incl. hardener)1 6


Flexpolyester contour putty for plastics

AREA OF APPLICATION

For repairing small scratches and defects on plastic parts.

CHARACTERISTICS

Plastic outline putty.


134.796dark grey / 2.20 lbs (1.000) g tin

(incl. hardener)1 12


á 100 pcs.1 1

Alu Spezialaluminium & galvanized puttyAREA OF APPLICATION

A special putty for working on aluminium surfaces.

CHARACTERISTICS

Alu Spezial is a special polyester hard putty for aluminium surfaces. It has a lower temperature expansion with less shrinking at a very high degree of hardness. This flexible repair putty absorbs vibrations and oscillations better. It is suitable for all special repairs on aluminium. Besides it offers perfect adhesion on steel-, zinc- and aluminium bases.


148.524lightgrey / 3.97 lbs (1.800 g) tin

(incl. hardener)1 6


Multi Pluspolyester multifunctional putty

AREA OF APPLICATION

For universal use as a filling and fine putty on all sheet metal surfaces, as well on galvanised and aluminium bodywork in car repairs. One product for all applications.

CHARACTERISTICS

Multifunctional putty with light, pore-free spreading behaviour and good adhesive properties. Superlight sandability.


138.451 white / 1.6 kg tin (incl. hardener) 1 6

CARSYSTEM

7

CHP hardener for SprayCHP hardener for Spray

AREA OF APPLICATION

CHP-Hardener for polyester putty.


147.473 red / CHP hardener tube / (50 g) 1 1

Spray Thinnerspray putty thinner

DESCRIPTION

Thinner for polyester spray putty.


124.315transparent / 33.81 oz (1 l) tin /

spray putty thinner1 6

Spraypolyester spray filler

AREA OF APPLICATION

For filling uneven surfaces, sanding traces and pore bubbles on bodywork parts, both in the area of cars and lorries and also in vehicle construction and repair.

CHARACTERISTICS

Spray is a 2 comp. polyester spray filler that is easy to sand. It has good adhesive properties to metal, wood, polyester puttied areas and GRP parts. It is for filling smaller and larger uneven areas. It dries up rapidly and produces a pore-free surface.

PROCESSING EQUIPMENT

All polyester products are porous and precautions should be taken to insure peak product performance. Once Spray is sanded, it must be topcoated immediately with a good quality 2K urethane primer such as CS Air Plus or 540 to properly seal the surface from moisture penetration.

AREA OF APPLICATION

Gravity Spray Gun, jet size 2,5 diameter. Pressure: 2 – 2,5 bar.


127.978grey / 3.31 lbs (1.500 g) tin

(incl. hardener)1 6

Multi Silver Lightpolyester multifunctional putty

AREA OF APPLICATION

For universal use as a filling and fine putty with excellent adhesion to all metallic surfaces, particularly aluminium and galvanized steel.Very lightweight (1.44g/ml) polyester multifunctional putty. Because of its thixotropic processing properties, suitable even for difficult areas.


140.795silver / 3.31 lbs (1.500 g) tin

(incl. hardener)1 6


á 100 pcs.1 1

CARSYSTEM

8

Dualmaticputty dispenser – manual

AREA OF APPLICATION

Precise measuring of polyester putty and hardener in order to ensure the cor-rect mixing ratio. The amount of hardener to be added can be adjusted.

CHARACTERISTICS

Mobile, handy device for 3 kg cartridges. Manual operation.


123.892putty dispenser – manual

for 3 kg cartridges1 1

132.116Soft beige / 5,73 lbs cartridge

(incl. hardener)1 6

147.337Multi green 5.56 lbs cartridge

(incl. hardener)1 6

142.889 Putty Board 10 pcs. bag 1 1


Putty Knifesteel spreader

CHARACTERISTICS

Steel spreader with a solvent-resistant plastic handle.


137.435 60 mm 1 12

137.436 80 mm 1 12

137.437 100 mm 1 12

1K Spray Primerspray filler

AREA OF APPLICATION

Smoothes shallow uneven spots and serves as a blocking primer on polyester putty.

CHARACTERISTICS

Fast-drying acrylic filler with excellent adhesion and very high filling performance.


125.580 grey / 13.53 oz (400 ml) 1 12

Plastic Spreaderplastic spreader

CHARACTERISTICS

Unbreakable and solvent-resistant plastic spreader, width 12 cm.


152.719 115 mm × 77 mm 1 100

CARSYSTEM

9

Slim Tapespecial masking tape

AREA OF APPLICATION

High-performance masking tape for problematic materials, such as rubber and plastic parts.

CHARACTERISTICS

Extremely thin, flexible and waterproof. High curve resistance, hardly any paint edges, temperature resistant up to 100 °C.


133.827 18 mm × 50 m 10 160

Master Tape Greenmasking tape

AREA OF APPLICATION

Professional masking tape for paint shops.

CHARACTERISTICS

Waterproof, temperature resistant up to 110°C.


149.221 19 mm × 50 m 48 48

149.225 38 mm × 50 m 24 24

149.226 50 mm × 50 m 24 24

WR-Lifting Tape Premiummasking tape – perforated

DESCRIPTION

Special masking tape for masking rubber trim / gaskets around automotive glass, as well as for covering headlamps, rear lights and direction indicators.

CHARACTERISTICS

A masking tape which consists of a highly resistant, transparent, perforated plastics material strip. Waterproof, temperature resistant up to 100°C. It offers two sizes in a band, 9 and 11 mm.


For this masking tape a dispenser is not necessary because it is perforated.


151.504 perforated / 9 + 11 mm × 10 m 1 36

Foam Tapefoam sealing tape

AREA OF APPLICATION

For professionally covering openings (doors, boot lids and engine bonnets). For perfectly sealing gaps and holes.

CHARACTERISTICS

Silicone-free tape, temperature resistant up to 80 °C. The rounded geometry ensures a very easy and universal application.


148.861 13 mm × 50 m 1 80

CARSYSTEM

10

Metal Spray Out Cardscolor cards metal white and grey

CHARACTERISTICS

The Metal Spray Out Cards are color match cards for the perfect color match before painting. The Metal Spray Out Cards are paintable with all common water and solvent based base coats in the market. An additional advantage is the printed box pattern by which you can perfectly check the opacity.


146.191Metal Spray Out Cards / white /

10 pcs. per box 1 20

146.608Metal Spray Out Cards /

dark grey / 10 pcs. per box1 20

Touch Upbottle with brush – fillable 50 ml

DESCRIPTION

Bottle with brush for filling with coating.

CHARACTERISTICS

Recloseable, transparent, unbreakable brush bottle with mixing shots and integrated brush for spot repairs such as stone chip damages or scratches on coated parts. Suitable for solvent and water-based coatings.


150.769 transparent / 50 ml × 25 pcs 1 1

Dry Coat-blackcontrol powder – black

AREA OF APPLICATION

Control powder for making imperfections in the surface visible while sanding.

CHARACTERISTICS

The powder does not contain any solvents and does not clog the abrasive. The powder cartridge fits into the applicator.


128.366black / set of: control powder pad

+ 2 × 30g refill1 6

Magnetic Sanding Protectionedge protection

AREA OF APPLICATION

Magnetic Sanding Protection is a plastic stripe with embedded magnetic discs. It is used for the protection of edges against unwanted sanding during the sanding-procedure of adjacent areas. Additionally it is used for fixing masking paper on car bodies without masking tape.

CHARACTERISTICS

Set, 4 pcs. each.


130.992 4 × 55 cm 1 5

CARSYSTEM

11

Refinish Restorerplastic renewer

AREA OF APPLICATION

Refinish Restorer is a high quality restorer for all kind of unpainted plastics, which were faded out by the sun. After processing Refinsh Restorer on the plastic it will look quite like new again. Refinish Restorer is long-lasting and has a perfect finish. Refinish Restorer removes perfectly and effortlessly polish-splashes, -stains and -spots on plastic.

CHARACTERISTICS

Refinish Restorer is a transparent liquid. It is very easy to apply on plastic surfac-es, using any polishing cloth. It achieves excellent results on unpainted plastic surfaces. Refinish Restorer does not contain any silicone. For exterior use only.

BODY SHOP SAFE

Do not apply to painted surfaces.


151.071 transparent / 33.81 oz (1 l) 1 6

Magnetic Flat Stripflat strip

AREA OF APPLICATION

Magnetic Flat Strip is a plastic stripe with embedded magnetic discs to fix masking paper on car bodies without any masking tape. As the Magnetic Flat Strip is reusable very often, it is not necesary to use masking tape and there-fore it safes a lot of costs in the paint-body-shop.

CHARACTERISTICS

Set, 4 pcs. each.


137.214 4 × 55 cm 1 5

Cockpit-Spraycleaning spray

AREA OF APPLICATION

Cockpit Spray is used as a silicone free maintenance- and cleaning agent for all plastic and rubber surfaces inside the vehicle.

CHARACTERISTICS

Cockpit Spray is designed for the care and cleaning of the dashboard, instruments, and plastic parts inside the car. This product does not contain any silicone, has an antistatic effect and brightens and refreshes colors. Cockpit Spray has a pleasant orange scent.


126.020 transparent / 13.53 oz (400 ml) 1 12

Rust Remover Sprayrust remover

AREA OF APPLICATION

Loosens jammed screws, nuts, door hinges, etc.

CHARACTERISTICS

An oil that creeps underneath the rust, protecting the treated components against corrosion and mechanical abrasion.


126.028 brown / 7,10 oz (300 ml) 1 12

CARSYSTEM

12

Zink-Sprayanticorrosive

AREA OF APPLICATION

Zink-Spray is an anticorrosive aerosol for spot welding on inside panels in bodyworks.

CHARACTERISTICS

Cold galvanising of metal substrates. Temperature resistant up to 490°C according to DIN 50976, 53167, 50021, 53151.


126.030 grey / 20,29 oz (400 ml) 1 12

Silver Wheelsilver wheel spray

AREA OF APPLICATION

Suitable for steel wheel rims.

CHARACTERISTICS

Fast-drying, highly abrasion resistant acrylic-based paint, which protects against corrosion.


126.021 silver / 400 ml 1 12

KS-50seam sealer – brushable

AREA OF APPLICATION

KS-50 is a waterproof sealer for joints, particularly processed on aftermarket carbody-parts and covering trim pieces. KS-50 is a brushable, durable, perma-nently elastic seam sealing for the front and rear spoiler, overlapping seams in the trunk, on the floor in the passenger compartment and on wheel arches etc. KS-50 has an excellent adhesion to bare, primed or coated metal, is overpaintable and makes a replication of an authentic structure possible.

CHARACTERISTICS

KS-50 is a permanently elastic, brushable seam sealer made of synthetic rubber, which is very quick-drying and heat / cold-resistant (-25°C to +80°C).


150.801 grey / 2.20 lbs (1 kg) 1 12

CARSYSTEM

13

KS-100underbody protection bitumen – brushable

AREA OF APPLICATION

KS-100 is a long-term corrosion preventative for underbody treatment of all types of vehicles. It protects the underbody from rocks, road salt, etc.

CHARACTERISTICS

KS-100 is a thixotropic, brushable underbody-protection made of a bitumen- resin mixture, that protects vehicle underbodies from corrosion and reduces road noise.


126.032 black / 33.81 oz (1 l) 1 12

KS-200cavity protection

AREA OF APPLICATION

KS-200 is designed to protect hollow cavities in vehicles from corrosion. It even flows into tight spaces and has a very good adhesion to metal.

CHARACTERISTICS

KS-200 has a wax-like consistency that leaves an elastic film on the surface once the solvents are evaporated. KS-200 will provide reliable rust protection for several years and has a long-term protection on surfaces, which are in contact with aggressive liquids like salt-water.


126.062 brown-transparent / 33.81 oz (1 l) 1 12

142.279 sold separately: tube set / 0.95 m 1 1

135.396Premium Spray Gun

for underbody protection1 1

126.040KS Dual Gun

incl. 2 additional suction pipes1 1

126.058sold separately:

cavity protection tube / 0.9 m1 1

KS-250cavity protection ML

AREA OF APPLICATION

KS-250 is designed to protect hollow cavities on vehicles from corrosion. It even flows into tight spaces and has a very good adhesion to metal. KS-250 has an excellent heat resistance and can be used on parts of the engine, as well. For renewing and retreating of existing protective coatings.

CHARACTERISTICS

KS-250 has a hydrophobic and penetrating effect. Once the solvents are evaporated, KS-250 is slightly sticky and leaves a glazed wax-like film on the surface. KS-250 will provide a reliable rust protection for several years and has a long-term protection on surfaces, which are in contact with agressive liquids like salt-water etc.. KS 250 has a high melting point of 160°C and has a no-dripping feature for an optimal use.


126.061brown-transparent / 16.91 oz (500 ml)

1 12

CARSYSTEM

14

KS-300cavity protection wax

AREA OF APPLICATION

KS-300 is designed to protect hollow cavities in vehicles from corrosion. It even flows into tight spaces and has a very good adhesion to metal. KS-300 has an excellent heat resistance and can therefore also be used on parts of the engine.

CHARACTERISTICS

KS-300 has a hydrophobic and penetrating effect on the surface. Once the solvents are evaporated KS-300 is slightly sticky and leaves a glazed wax-like film on the surface. KS-300 will provide a reliable rust protection for several years and provides a long-term protection of surfaces, which are in contact with aggressive liquids like salt-water. KS 300 has a high melting point of 160°C.


134.165 white-transparent / 33.81 oz (1 l) 1 12




126.040KS Dual Gun




KS-500underbody protection bitumen

AREA OF APPLICATION

KS-500 is a bitumen protection for under-body treatment of all types of vehicles.

CHARACTERISTICS

KS 500 provides long-term, bitumen-based under-body protection. KS-500 offers effective protection against stone chips and road salt. It reduces vibrations and road noise.


126.034 black / 33.81 oz (1 l) 1 12




126.040KS Dual Gun


KS-550black undercoating-bitumen

AREA OF APPLICATION

KS-550 is a car body bitumen protection for under-body treatment. Especially for renewing and retreating of existing protective coatings:

CHARACTERISTICS

KS 550 provides long-term, bitumen-based under-body protection. KS-550 offers effective protection from stone chips and road salt and reduces vibrations and road noise.


126.029 black / 16.91 oz (500 ml) 1 12

CARSYSTEM

15

KS-1000stone chip protection

AREA OF APPLICATION

KS-1000 is a long-lasting stone chip protection for all car body panels. KS-1000 protects door sills, engine bonnets and the under-body against corrosion. It can also be used on PVC.

CHARACTERISTICS

Once cured KS 1000 is resistant to oil, water, and road elements. Prior to topcoat KS 1000 must be primed with a good quality 2K urethane primer such as CS Air Plus or 540 or catalyzed non sanding sealer.


149.265 black / 33,81 oz (1 l) 1 12


KS Gun for underbody protection1 1


126.040KS Dual Gun


KS-1050stone chip protection spray

AREA OF APPLICATION

KS-1050 is a long-lasting stone chip protection for all car body components. KS-1050 protects door sills, engine bonnets and under-bodies against corrosion. It can also be used on PVC.

CHARACTERISTICS

KS-1050 is a high solid, asbestos-free stone chip protection. After drying, KS-1050 provides a permanent elastic, recoatable and textured surface. The temperature resistance (cured) of KS-1050 is from -25°C to +80°C. It is resistant against oil, water and road salt water.


126.023 black / 16.91 oz (500 ml) 1 12

KS-3000 PlusHS stone chip protection

DESCRIPTION

The KS-3000 Plus is an overpaintable anti-stoneship protection of the latest generation. After drying the coating is overpaintable with most common paint systems. After the product has completely dried, a durable elastic film remains.

CHARACTERISTICS

KS-3000 Plus has a very good adhesion to almost all surfaces and is resistant to extreme weather conditions, abrasion, splash water, impurities and salt.


152.804 grey / 33,81 oz (1 l) 1 12




126.040KS Dual Gun


CARSYSTEM

16

KS-4000water-based stone chip protection

AREA OF APPLICATION

KS-4000 is a long-lasting stone chip protection for all car body panels like spoilers and doors. KS-4000 protects door sills, engine bonnets and the under-body against corrosion. It can also be used on PVC.

CHARACTERISTICS

KS-4000 is a water-based stone chip protection. It is a very high quality protec-tion for under-body treatment and all types of car body panels. KS-4000 has a very good adhesion to all surfaces and is rapidly overpaintable with all kind of paint systems. KS-4000 is solvent-resistant. When applying 2 comp., base coat or water based lacquers the surface must be primed with a suitable 2K primer.


134.374 black / 33,81 oz (1 l) 1 12


KS Gun for underbody protection1 1


126.040KS Dual Gun


KS-Dual Gungun for underbody protection

AREA OF APPLICATION

KS Dual Gun can be used with all kind of stone-chip protection materials, under-body waxes and cavity protections, which are available in one litre tins.

CHARACTERISTICS

KS Dual Gun is a special developed gun for usage of all kind of solvent based stone chip protection materials, under-body waxes and cavity protections. The rapid action coupling makes a fast change between different products very easy.


• Air consumption 200 – 250 l/min; 1,7 – 2,1 cfm • Max. pressure 10-12 bar; 135- 162 psi • Work pressure 3,5 – 4,5 bar 45 – 60 psi • Thread for air-inlet 1/4 – inner thread


126.040KS Dual Gun




126.048 sold separately: suction pipes 1 1

KS-Gungun for underbody protection

AREA OF APPLICATION

KS-Gun rebuilts the original structure of under-body and stone chip protection. The material- and air supply of the KS- Gun are adjustable. It is not necessary to clean the gun after use because the material inside of the gun does not dry up when the material needle is closed to the maximum.

CHARACTERISTICS

Safety valve for usage of 1 litre tins:• Pressure max.: 10 – 12 bar / 135 – 162 psi• Optimal working pressure: 2 – 4 bar / 27 – 54 psi• Air consumption: 130 – 250 l / min. / 1.53 – 2.95 cfm


135.396Premium Spray Gun for underbody protection

1 1


CARSYSTEM

17

12W UV LED Lamps with TripodUV LED lamp

CHARACTERISTICS

The UV LED Lamp is a mobile UV Lamp which is perfectly suitable for drying UV products. Due to the battery it is flexible in use and fixable with a magnet or tripod to bring it in perfect position directly above or in front of the repair area.


154.98012W UV LED 3er lamp set

incl. tripod1 1

THE SET CONTAINS:

1 × Tripod for UV LED Lamp (154.646) 3 × 12W UV LED Lamp (154.645)

UV LED LampUV LED lamp

CHARACTERISTICS

The UV LED Lamp is a mobile UV Lamp which is perfectly suitable for drying UV products. Due to the battery it is flexible in use and fixable with a magnet or tripod to bring it in perfect position directly above or in front of the repair area.


153.777 UV Smart Lamp 1 12

155.036 UV LED Lamp XL 30W 1 6

154.646 Stand for UV LED Lamp 1 6

154.648 Magnet for UV LED Lamp 1 60

UV Cleartransparent UV clear coat

AREA OF APPLICATION

Using this new CS UV Clear clear coat for the repair of Fisheyes, rock chips, small scratches, etc. CAUTION – In edge building CS UV Clear is of limited suitability, since the product has an insufficient adhesion. Therefore the clear coat is only punctual applicable.

CHARACTERISTICS

CS UV Clear is a VOC-compliant, UV drying clearcoat.


154.528 UV Clear 3,38 oz. (100 ml) 1 20

CARSYSTEM

18

UV FILLER SprayUV Filler

CHARACTERISTICS

The UV filler is an UV drying 1K Filler for the fast and economical repair. The filler is for use on existing paint layers (Including thermoplastic acrylates), steel, aluminium, galvanized steel and polyester putty. For the processing on plastic a proper / suitable plastic primer must be applied before. Due to an extremely short drying time of 5 minutes, the UV filler has an enormous advantage against conventional 2K filler. With the UV filler the times of the preparation process can be significantly reduced.


154.189 transparent / grey / 1.000 ml 1 6

154.190 transparent / 400 ml 1 6

155.036 UV LED Lamp XL 30W 1 6

UV Spraygun cleanerUV Spraygun Cleaner

CHARACTERISTICS

The UV Spraygun Cleaner is perfectly suitable for the thorough, fast and gentle cleaning of the UV Spraygun directly after application. It washes the material residues on the air cap to prevent it from drying.


154.615 400 ml 1 6

HpP Primer1 comp. plastic primer

CHARACTERISTICS

The Carsystem HpP Primer is a 1 comp. special primer for use on solvent resistant plastics. The primer is characterized by its excellent bonding on non-pretreated, solvent resistant plastics which can be overpainted with all common base coats in the market as well as 1 comp. and 2 comp. paint systems. Use on PE is not recommended.


154.706 white / 1.0 kg 1 6

154.707 grey / 1.0 kg 1 6

154.708 black / 1.0 kg 1 6

154.712 thinner / 1.0 l 1 6

HpP Primer Spray1 comp. plastic primer

CHARACTERISTICS

The Carsystem HpP Primer Spray is a 1K special primer for use on solvent resistent plastics. The spray is characterized by its excellent bonding on non-pretreated, solvent resistant plastics which can be overpainted with all common base coats in the market as well as 1K and 2K paint systems. Use on PE is not recommended.


154.709 white / 400 ml 1 12

154.710 grey / 400 ml 1 12

154.711 black / 400 ml 1 12

CARSYSTEM

19

Paint Planerplaner and holder

AREA OF APPLICATION

Paint Planer removes dry runs, dust nibs, and other surface imperfections with-out harming or scratching the surrounded areas. Paint Planer can be used to scrape off smoothly the hardened paint-tears and embedded dust nips from the surface, in order to prepare this areas for further steps like sanding or polishing.

CHARACTERISTICS

Paint Planer is a special, very sharp blade, made of chrome/vanadium steel. The blade of Paint Planer is made with a special hollow-ground form and does never need to be re-sharpened. The Paint Planer Holder has an embedded magnet, on which the Paint Planer blade can be fixed. The upper side of the holder has a VELCRO® for fixing Mini Sanding Discs Grip.


• Mini Sanding Discs Grip• Soft Interface Pad


142.995 Paint Planer 1 1

142.996 Holder 1 1

Plastic Cleanerplastic degreaser antistatic

AREA OF APPLICATION

A plastic cleaner for all plastic interiors and exteriors.

CHARACTERISTICS

Safe removal of dirt, grease, oil, silicone, wax, tar, glue, etc. The plastic cleaner supplies an antistatic effect, has a very fast flash off time and a high yield.


145.985 clear / 400 ml 1 12

Acryl Thinner acrylic thinner

AREA OF APPLICATION

Universal acrylic thinner for adjustment of the spray viscosity of clear coats and fillers.


150.331 standard / transparent / 1 l 1 12

CARSYSTEM

20

Silicone Remover Milddegreaser – mild

AREA OF APPLICATION

Silicone Remover Mild is a cleaning detergent for use prior to the painting process. It removes efficiently dirt, grease, oil, silicone, wax, tar or adhesive residues.

CHARACTERISTICS

• Antistatic effect to avoid dust inclusions• Easy and time saving application• Very fast flash-off time• Yield-optimised• Mild, non-aggressive cleaning detergent• Improves the adhesion for the following paint application


146.711 1 l 1 12

2K Clear VOC Silkmatt2K clear coat

DESCRIPTION

This VOC-conform 2K Clear VOC Silk Matt is suitable for coating of silk-matt components in repairing as well as for new parts or glossy paints.

AREA OF APPLICATION

A silk-matt clear coat which is very easy to process – with a perfect finish in the silk-matt range. The smooth finish outcasts the clearcoat as a perfect unit. Besides, the clear coat is resistant against slight scratches and fingerprints on the surface.


148.986 2K Clear VOC silkmatt / 1.0 l 1 12

148.983 2K Clear VOC Matt / 1.0 l 1 12

148.9842K VOC hardener matt /

silkmatt fast / 0.5 l1 12

3K Carbo Spraytransparent filler for carbon parts

AREA OF APPLICATION

For filling uneven surfaces (pinholes, sanding marks, concavities).

CHARACTERISTICS

Carbo Spray is a transparent filler for carbon parts.• Easy sandable• Adhesion on carbon grounds

(Polyester/Epoxy – carry out a test beforehand)

• Adhesion on polyester filler• Adhesion on GRP parts

• For filling small or deeper imperfections

• Very rapid hardening• Pinhole-free surface• Transparent• UV-resistant – no yellowing


155.199 3K Carbo Spray transparent 1 1

CARSYSTEM

21

2K Carbo Clear Plus2K carbon clear coat

AREA OF APPLICATION

This new, very rich in solids, VOC-conform Carbon Clear Coat is suitable for all paint works on Carbon. Whether small parts or complete vehicle parts – with this special Clear Coat you cover the whole spectrum of Carbon coating.

CHARACTERISTICS

This VOC-conform clear coat is a special clear coat for Carbon parts. It is characterized by a rapid and very good through drying. Well balanced pot life enables safe application. The 2K Carbo Clear has a very brilliant gloss and run. It can be polished easily, has an excellent scratch resistance and an outstanding durability due to the very high UV-Protection, chemical- and weather resistance.


153.217 2K Carbo Clear Plus / 1.0 l 1 12

153.207 2K Carbo Clear Plus / 5.0 l 1 4

Carbo Spray Thinnerthinner

AREA OF APPLICATION

Thinner for Carbo Spray.


148.234transparent / 1.98 lbs

(900 g) tin1 6

Carbo Spraytransparent filler for carbon parts

AREA OF APPLICATION

For filling uneven surfaces (pinholes, sanding marks, concavities).

CHARACTERISTICS

Carbo Spray is a transparent filler for carbon parts.• Easy sandable• Adhesion on carbon grounds

(Polyester/Epoxy – carry out a test beforehand)

• Adhesion on polyester filler• Adhesion on GRP parts

• For filling small or deeper imperfections

• Very rapid hardening• Pinhole-free surface• Transparent• UV-resistant – no yellowing


148.019transparent / 1.81 lbs

(820g) tin (incl. hardener)1 6

CARSYSTEM

22

CRC Line Inc.

USA/Canada Distribution Partner Phone 508-757-0013 120A Goddard Memorial Drive Web:www.crcline.com

Worcester, Ma 01603

Step 1: Knock down any nibs with our 34mm P1500 and 154.297 Sanding Block

Step 2: Depending on size of the panel, color & clear, use 75mm or 152mm P1500 - P3000 with firm interface pad for flat areas and soft interface pad for curved areas. Use Random Orbital Sander.

Note: Always clean sandpaper with microfiber cloth. ProFlex has an Extremely Long Life

m Orbitatal Sander.

Step 3: Buff & Polish to A Flawless Finish

ProFlex Color Key For Grit Selection: P1500 - Pink P2500 - Blue P2000 - Green P3000 - Grey

ProFlexM a d e b y U n i v e r s e

CRC Line Inc.


Worcester, Ma 01603




m Orbitatal Sander.



CARSYSTEM

23

ProFlex Kit #1


Finish sanding in a new dimension.

A perfect system for a perfect finish.

Art. No. Specification Kit includes

154.448 ProFlex Jupiter / 75 mm – no holes / P 1500 5





154.297 ProFlex Pluto sanding Block 1

154.428 ProFlex Pluto / P 1500 / ø 34 mm 10




155.098 ProFlex Interface Pad hard 75 mm 1

ProFlex Kit #2


Finish sanding in a new dimension.

A perfect system for a perfect finish.

Art. No. Specification Kit includes





154.099 Pad Saver á 5 pcs. / bag 1


ProFlex Jupiter152 mm – no holes

CHARACTERISTICS

The Carsystem ProFlex Jupiter sanding discs are used as the final sanding step before polishing. Due to its extremely uniform and shallow scratch pattern the Jupiter products create a perfect surface after sanding what largely reduces the polishing time.


Machine – use with the ProFlex Interface Pad Soft 150 mm 154.295. Machine – use with the Carsystem CP Palm Sander 141.293.


154.660 P 1500 50 1000

154.661 P 2000 50 1000

154.662 P 2500 50 1000

154.663 P 3000 50 1000

CARSYSTEM

24

Pad Saverinterface pad 150 mm

CHARACTERISTICS

The Carsystem Pad Saver is a 3 mm high interface pad with 150 mm diameter which is perfectly compatible for all common 150 mm excenter back pads. The Pad Saver is used between back pad and the abrasive by which it offers protection for the velcro of the back pad. Due to the 97 holes it is compatible for nearly all abrasives, back pads and interface pads in the market.


154.099 Pad Saver á 5 pcs. / bag 1 100

ProFlex Interface Pad interface pad 150 mm – no holes

CHARACTERISTICS

Interface Pad, Micro-Velcro, 150 mm. Suitable for ProFlex Jupiter 152 mm.


155.101ProFlex Interface Pad soft

150 mm1 20

ProFlex Jupiter75 mm – no holes

CHARACTERISTICS

The Carsystem ProFlex Jupiter sanding discs are used as the final sanding step before polishing. Due to its extremely uniform and shallow scratch pattern the Jupiter products create a perfect surface after sanding what largely reduces the polishing time.


Machine – use with the ProFlex Interface Pad Soft 75 mm 154.296. Machine – use with the Carsystem Finish Sander 143.388.


154.448 P 1500 50 1000

153.466 P 2000 50 1000

153.467 P 2500 50 1000

153.468 P 3000 50 1000

ProFlex Interface Pad interface pad 75 mm – no holes

CHARACTERISTICS

Interface Pad Micro-Velcro, 75 mm. Suitable for ProFlex Saturn 75 mm.


154.296ProFlex Interface Pad soft

75 mm1 20

155.098ProFlex Interface Pad hard

75 mm1 20

CARSYSTEM

25

CRC Line Inc.


Worcester, Ma 01603






ProFlex Plutofilm abrasive

CHARACTERISTICS

The Carsystem ProFlex Pluto discs are small sanding discs for the manual dry sanding process of dust inclusions and imperfections in the painted surface.


Machine – use in combination with the Carsystem Back Pad – 144.768. Manual sanding – use in combination with CS ProFlex Pluto Sanding Block – 154.297.


154.428 P 1500 / ø 34 mm 100 6000

154.429 P 2000 / ø 34 mm 100 6000

154.430 P 2500 / ø 34 mm 100 6000

154.431 P 3000 / ø 34 mm 100 6000

ProFlex Pluto Sanding BlockSanding block, ø 34 mm

CHARACTERISTICS

Sanding block for Pluto – sticky discs.


154.297 ProFlex Pluto sanding Block 1 10

ProFlex Interface Padinterface pad 34 mm – no holes

CHARACTERISTICS

Interface Pad Micro-Velcro, 34 mm. Suitable for ProFlex Jupiter 34 mm.


155.097ProFlex Interface Pad hard /

no holes / 34 mm5 75

CARSYSTEM

26

CARSYSTEM

CRC Line Inc.USA / Canada Distribution Partner120 A Goddard Memorial DriveWorcester, Massachusetts 01603

Phone: +1 508-757-0013Web: www.crcline.com

Version 0619

a trademark of

cs usa catalog 2019 0619 - crc line · 127.972 beige/3,97 lbs tin (incl. hardener) 1 6 132.116...

Documents